Best Automotive Replacement Short Engine Blocks - Buying Guide
Last Updated: 05/02/2024
Share on
Bestselling Automotive Replacement Short Engine Blocks on Amazon
- Subaru Short Block Engine - 10103AC0409Z
- Subaru Short Block Engine - 10103AC890
- HZ Assembled Short Engine Block Compatible with Honda GX340 11HP Engine
- Echo SB1091 - short block engine
- HZ Assembled Short Engine Block Compatible with Honda GX390 13HP Engine
- SoloSwap Chevy LS Mock Up Engine Swap Short-Block, No Head, Includes Hardware for Easy Assembly, 18...
- Engine Case, Magnesium, Stock Bore, For 8mm Studs, Compatible with Dune Buggy
- Subaru 10103AB820 Short Block Engine
- SoloSwap SBC Mock Up Engine Swap Long-Block w/Heads: Compatible with Gen I SBC, 29 lbs Lightweight ...
- SoloSwap Chevy LS Mock Up Engine Swap Long-Block w/Heads, Long Block Version Weighs 35 Pounds, Incl...
#1
Subaru Short Block Engine - 10103AC0409Z
Asin: B013RK6YC2 | Model: 10103AC0409Z | PartNumber: 10103AC0409Z | Ean: 0881314947874 | UPC: 881314947874
Brand: Subaru | Manufacturer: Subaru
See On Amazon #2
Subaru Short Block Engine - 10103AC890
Asin: B072YW2DZW | Model: 10103AC890 | PartNumber: 10103AC890 | Ean: 0752589526074 | UPC: 752589526074
Brand: Subaru | Manufacturer: Subaru
See On Amazon #3
HZ Assembled Short Engine Block Compatible with Honda GX340 11HP Engine
Asin: B0C27FC6XL | Model: TP560HD340 | PartNumber: TP560HD340 | Ean: 0747492777071 | UPC: 747492777071
Brand: HZ | Manufacturer: HZ
Dimensions: 12.60 x 14.90 x 13.20 inches
See On Amazon #4
Echo SB1091 - short block engine
Asin: B008G4LPME | Model: SB1091 | PartNumber: SB1091 | Ean: 0766239305872 | UPC: 766239305872
Features
- Brand New Genuine Echo SB1091 Short Block SRM280 PE280 PPT280 BRD280 PAS280 PPF280...
- Genuine Echo Part # SB1091
- Genuine OEM Echo Part
- See more on Amazon...
Genuine Oem Echo Part.
Genuine Echo Part # Sb1091.
Brand: Echo | Manufacturer: Echo
Dimensions: 8.00 x 8.00 x 8.00 inches | Weight: 2.42 Pounds
See On Amazon #5
HZ Assembled Short Engine Block Compatible with Honda GX390 13HP Engine
Asin: B0BTY9P6MZ | Model: TP560HD390 | PartNumber: TP560HD390 | Ean: 0747492776982 | UPC: 747492776982
Brand: HZ | Manufacturer: HZ
Dimensions: 12.80 x 15.10 x 13.20 Inches | Weight: 29.00 Pounds
See On Amazon #6
SoloSwap Chevy LS Mock Up Engine Swap Short-Block, No Head, Includes Hardware for Easy Assembly, 18 Pounds and Accepts Stock or Aftermarket LS Cylinder Heads
Asin: B0B9L1YSF5
Features
- EASY INSTALLATION: Compatible with all LS engine bolt-on such as intake manifolds, headers, oil pan, timing cover, water pump, and accessory brackets which makes positioning or fabricating engine mounts a breeze.
- LIGHTWEIGHT: Weighing in at 18 pounds for the short block or 35 pounds for the long block, this LS mock up engine can be lifted in and out of the vehicle by one person without the need for an engine hoist.
- FITS MULTIPLE APPLICATIONS: Replicates all Gen 3 and Gen 4 LS block size for test fit of LS1, LS2, LS3, LS6, LS7, LSA, and Vortec truck engines 4.8L, 5.3L, 6.0L and 6.2L. Short block version accepts all factory and aftermarket LS heads. Can be used to mock up any LS engine, including LS car and Vortec truck engines.
- LONG-LASTING CONSTRUCTION: Heavy duty 12 gauge steel construction is designed to last unlike the LS foam block which often suffers damage from thread inserts pulling out of the foam core.
- EASY STORAGE: Ships and can be stored flat with simple assembly/disassembly steps.
- See more on Amazon...
Fits Multiple Applications: Replicates All Gen 3 And Gen 4 Ls Block Size For Test Fit Of Ls1, Ls2, Ls3, Ls6, Ls7, Lsa, And Vortec Truck Engines 4.8L, 5.3L, 6.0L And 6.2L. Short Block Version Accepts All Factory And Aftermarket Ls Heads. Can Be Used To Mock Up Any Ls Engine, Including Ls Car And Vortec Truck Engines..
Easy Storage: Ships And Can Be Stored Flat With Simple Assembly/Disassembly Steps..
Long-Lasting Construction: Heavy Duty 12 Gauge Steel Construction Is Designed To Last Unlike The Ls Foam Block Which Often Suffers Damage From Thread Inserts Pulling Out Of The Foam Core..
Lightweight: Weighing In At 18 Pounds For The Short Block Or 35 Pounds For The Long Block, This Ls Mock Up Engine Can Be Lifted In And Out Of The Vehicle By One Person Without The Need For An Engine Hoist..
Brand: Speedway Motors | Manufacturer: Speedway Motors
Dimensions: 4.40 x 24.80 x 18.20 Inches | Weight: 20.00 Pounds
See On Amazon #7
Engine Case, Magnesium, Stock Bore, For 8mm Studs, Compatible with Dune Buggy
Asin: B003LIRJMU | Ean: 0707924368109 | UPC: 707924368109
Features
- New Universal Vw Engine Case / Magnesium Alloy AS41
- Weigh Approximately 25lbs
- 8mm Steel Case Savers
- Includes Oil Pick-Up Tube
- Dual Relief
- See more on Amazon...
8Mm Steel Case Savers.
Dual Relief.
Includes Oil Pick-Up Tube.
Weigh Approximately 25Lbs.
Brand: Empi | Manufacturer: Empi
Weight: 0.00 pounds
See On Amazon #8
Subaru 10103AB820 Short Block Engine
Asin: B00I7994TE | Model: 10103AB820 | PartNumber: 10103AB820
Genuine Subaru Parts.
Short Block Engine A.
Brand: Subaru | Manufacturer: Subaru
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.00 pounds
Warranty: Manufacturer Warranty
See On Amazon #9
SoloSwap SBC Mock Up Engine Swap Long-Block w/Heads: Compatible with Gen I SBC, 29 lbs Lightweight Design, Durable Steel, Easy Assembly, Ideal for Custom Projects
Asin: B0CM8ZW2L5
Features
- Patent pending SoloSwap is compatible with all SBC engine bolt-ons such as intake manifolds, headers, and oil pan, which makes positioning or fabricating engine mounts a breeze
- Weighing in at 18 pounds for the short block or 29 pounds for the long block, this SBC mock up engine can be lifted in and out of the vehicle by one person without the need for an engine hoist
- Replicates all Gen I SBC engines, including tall deck aftermarket blocks, classic and Vortec heads, and fits short or long water pumps
- Heavy duty 12 gauge steel construction is designed to last unlike the SBC foam block which often suffers damage from thread inserts pulling out of the foam core
- SoloSwap long block version comes with bolt on fabricated steel mock up heads | Short block version accepts all factory and aftermarket SBC heads
- See more on Amazon...
Replicates All Gen I Sbc Engines, Including Tall Deck Aftermarket Blocks, Classic And Vortec Heads, And Fits Short Or Long Water Pumps.
Soloswap Long Block Version Comes With Bolt On Fabricated Steel Mock Up Heads | Short Block Version Accepts All Factory And Aftermarket Sbc Heads.
Heavy Duty 12 Gauge Steel Construction Is Designed To Last Unlike The Sbc Foam Block Which Often Suffers Damage From Thread Inserts Pulling Out Of The Foam Core.
Weighing In At 18 Pounds For The Short Block Or 29 Pounds For The Long Block, This Sbc Mock Up Engine Can Be Lifted In And Out Of The Vehicle By One Person Without The Need For An Engine Hoist.
Brand: Speedway Motors | Manufacturer: Speedway Motors
Weight: 32.00 Pounds
See On Amazon #10
SoloSwap Chevy LS Mock Up Engine Swap Long-Block w/Heads, Long Block Version Weighs 35 Pounds, Includes Bolt-On Fabricated Steel Mock-Up Heads and Hardware for Assembly
Asin: B0B7KKJ3JB
Features
- SoloSwap is compatible with all LS engine bolt-ons such as intake manifolds, headers, oil pan, timing cover, water pump, and accessory brackets which makes positioning or fabricating engine mounts a breeze
- Weighing in at 18 pounds for the short block or 35 pounds for the long block, this LS mock up engine can be lifted in and out of the vehicle by one person without the need for an engine hoist
- Replicates all Gen 3 and Gen 4 LS block size for test fit of LS1, LS2, LS3, LS6, LS7, LSA, and Vortec truck engines 4.8L, 5.3L, 6.0L and 6.2L
- Heavy duty 12 gauge steel construction is designed to last unlike the LS foam block which often suffers damage from thread inserts pulling out of the foam core
- SoloSwap long block version comes with bolt on fabricated steel mock up heads | Short block version accepts all factory and aftermarket LS heads
- See more on Amazon...
Replicates All Gen 3 And Gen 4 Ls Block Size For Test Fit Of Ls1, Ls2, Ls3, Ls6, Ls7, Lsa, And Vortec Truck Engines 4.8L, 5.3L, 6.0L And 6.2L.
Soloswap Long Block Version Comes With Bolt On Fabricated Steel Mock Up Heads | Short Block Version Accepts All Factory And Aftermarket Ls Heads.
Heavy Duty 12 Gauge Steel Construction Is Designed To Last Unlike The Ls Foam Block Which Often Suffers Damage From Thread Inserts Pulling Out Of The Foam Core.
Weighing In At 18 Pounds For The Short Block Or 35 Pounds For The Long Block, This Ls Mock Up Engine Can Be Lifted In And Out Of The Vehicle By One Person Without The Need For An Engine Hoist.
Brand: Speedway Motors | Manufacturer: Speedway Motors
Weight: 39.00 Pounds
See On Amazon #11
Silscvtt Engine Oil Pan Engine Short Block 1142036020 Replacement for Toyota Avalon Camry Highlander
Asin: B0BCP87WC6 | Model: Does not apply | PartNumber: Does not apply
Features
- Part number: 114200V010, 1142036020, 114200V020, 11420-0V010, 11420-0V020, 11420-36020
- Replacement for: 2013-2018 Toyota Avalon 2.5L, 2010-2017 Toyota Camry 2.5L, 2009-2018 Toyota Highlande 2.7L, 2013-2018 Toyota RAV4 2.5L, 2011-2012 Toyota Sienna 2.7L, 2009-2015 Toyota Venza 2.7L
- High quality metal, coated oil pan, not easy to corrosion and aging, long service life
- The package includes oil pan and drain plug to facilitate replacement of original car parts
- We attach great importance to customer experience, so we offer a one-year warranty
- See more on Amazon...
High Quality Metal, Coated Oil Pan, Not Easy To Corrosion And Aging, Long Service Life.
We Attach Great Importance To Customer Experience, So We Offer A One-Year Warranty.
The Package Includes Oil Pan And Drain Plug To Facilitate Replacement Of Original Car Parts.
Replacement For: 2013-2018 Toyota Avalon 2.5L, 2010-2017 Toyota Camry 2.5L, 2009-2018 Toyota Highlande 2.7L, 2013-2018 Toyota Rav4 2.5L, 2011-2012 Toyota Sienna 2.7L, 2009-2015 Toyota Venza 2.7L.
Brand: Silscvtt | Manufacturer: Silscvtt
Dimensions: 7.48 x 18.90 x 14.96 inches | Weight: 13.43 pounds
See On Amazon #12
A-Team Performance - EFI Fabricated Intake Manifold with Fuel Rails and Throttle Body Short - Compatible with GM Chevrolet LS3 L92 SBC Small Block Chevy V8 GEN. III/IV (LS-BASED) Black
Asin: B079YBCQT7
Features
- EFI Fabricated Intake Manifold with Fuel Rails and Throttle Body Short Black
- Compatible With: Chevrolet Small Block V8 Gen. III/IV (LS-based) 4.8 L / 293 In3 (L20, Ly2) 5.3 L / 325 In3 (Lc9, Lh6, Lh8, Lmg, Ly5) 6.0 L / 364 In3 (L76, L96, LFA, LY6) 6.2 L / 376 LN3 (L92, L99, LS3, LSA) Rectangle Port Intake only!
- Fabricated Aluminum Sheet Metal Intake Manifold -102MM Throttle Body -Fuel Rails & Cross Over -4-Bolt LSX Gaskets & Hardware are included.
- Intake is about 2 taller than stock.
- Throttle Body is Dive by Cable Overview We Designed Our Fabricated Aluminum Sheet Metal Intake Manifold to Improve the Look and Performance of Your LS Engine.
- See more on Amazon...
Fabricated Aluminum Sheet Metal Intake Manifold -102Mm Throttle Body -Fuel Rails & Cross Over -4-Bolt Lsx Gaskets & Hardware Are Included..
Throttle Body Is Dive By Cable Overview We Designed Our Fabricated Aluminum Sheet Metal Intake Manifold To Improve The Look And Performance Of Your Ls Engine..
Intake Is About 2" Taller Than Stock..
Compatible With: Chevrolet Small Block V8 Gen. Iii/Iv (Ls-Based) · 4.8 L / 293 In3 (L20, Ly2) · 5.3 L / 325 In3 (Lc9, Lh6, Lh8, Lmg, Ly5) · 6.0 L / 364 In3 (L76, L96, Lfa, Ly6) · 6.2 L / 376 Ln3 (L92, L99, Ls3, Lsa) Rectangle Port Intake Only!.
Brand: A-Team Performance | Manufacturer: A-Team Performance
See On Amazon #13
Moroso 63857 Front Mandrel Drive Kit w/Pulleys, Fits Small Block Chevy Engines, Short Design
Asin: B001EMRSBW | Model: 63857 | PartNumber: 63857 | Ean: 0084663638572 | UPC: 084663638572
Features
- Bolts to balancer balancer does not need to be drilled like older designs Pulleys are hard coat anodized and mandrel is black oxide for exceptional strength and extended service life Kits include: one-piece, forged steel drive mandrel, 4" V-belt pulley for alternator, 2-1 2" V-belt pulley for vacuum pump, 1" (16 tooth) Gilmer pulley for external oil pump, guide plates, assorted spacers, belt guides and hardware
- See more on Amazon...
First Available: 09/08/2012
Brand: Moroso | Manufacturer: Moroso
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 0.00 Pounds
Warranty: 90 Day Manufacturer
See On Amazon #14
1958-86 Compatible/Replacement for Chevy Small Block 283-305-327-350 Steel (Tall) Engine Dress Up Kit - Chrome
Asin: B001E2IC8K | Model: HZ-3023 | PartNumber: HZ-3023
Features
- Chevy small block chrome steel engine dress up kit fits 1958-1986 Chevy 283-305-327-350 small block engines.
- 1 pair of baffled short OEM style chrome steel valve covers.
- 1 engine dipstick with chrome steel tube.
- 1 chrome steel push-in style breather cap.
- 1 chrome steel timing chain cover.
- See more on Amazon...
1 Engine Dipstick With Chrome Steel Tube..
1 Chrome Steel Timing Chain Cover..
1 Chrome Steel Push-In Style Breather Cap..
1 Pair Of Baffled Short Oem Style Chrome Steel Valve Covers..
Brand: CFR Performance | Manufacturer: CFR Performance
Dimensions: 4.00 x 4.00 x 4.00 inches | Weight: 9.00 pounds
See On Amazon #15
Echo SB1078 Short Block Genuine Original Equipment Manufacturer (OEM) Part
Asin: B008G4LO5W | Model: SB1078 | PartNumber: SB1078 | Ean: 0663151494328 | UPC: 663151494328
Brand: Echo | Manufacturer: Echo
See On Amazon #16
YIYIBYUS Engine Crankcase Cylinder Piston Crankshaft, 50mm Standard Bore Engine Short Block for Stihl Chainsaw 044 Ms440
Asin: B0C2Z7M22S | Model: 044 MS440 | PartNumber: 044 MS440 | Ean: 0722487939351 | UPC: 722487939351
Features
- Engine Crankcase Cylinder Piston Crankshaft This is for a 50mm Standard bore new engine short block
- Model 044 MS440
- Features 100% brand new and high quality,Durable. It could correctly replace the original quality part.
- Note Installation Manual Is NOT Included. Professional Installation Is Highly Recommended. Please make sure it will fit your machine before purchasing it. Please check pictures for more details.
- Warranty If our product does not work properly for you and you want to exchange another one or get a refund, please confirm with our customer service first and list the product detailed problems. We keep our promises that we will provide you with the best solution within 24 hours.
- See more on Amazon...
✧【Features】100% Brand New And High Quality,Durable. It Could Correctly Replace The Original Quality Part..
✧【Warranty】If Our Product Does Not Work Properly For You And You Want To Exchange Another One Or Get A Refund, Please Confirm With Our Customer Service First And List The Product Detailed Problems. We Keep Our Promises That We Will Provide You With The Best Solution Within 24 Hours..
✧【Note】Installation Manual Is Not Included. Professional Installation Is Highly Recommended. Please Make Sure It Will Fit Your Machine Before Purchasing It. Please Check Pictures For More Details..
✧【Model】044 Ms440.
Brand: YIYIBYUS | Manufacturer: YIYIBYUS
Dimensions: 10.00 x 11.00 x 8.00 inches
See On Amazon #17
A-Team Performance - EFI Fabricated Intake Manifold with Fuel Rails and Throttle Body Short - Compatible with GM Chevrolet LS3 L92 SBC Small Block Chevy V8 GEN. III/IV (LS-BASED) Silver
Asin: B08XTFJCP2
Features
- EFI Fabricated Intake Manifold with Fuel Rails and Throttle Body Short, Silver
- Compatible With: Chevrolet Small Block V8 Gen. III/IV (LS-based) 4.8 L / 293 In3 (L20, Ly2) 5.3 L / 325 In3 (Lc9, Lh6, Lh8, Lmg, Ly5) 6.0 L / 364 In3 (L76, L96, LFA, LY6) 6.2 L / 376 LN3 (L92, L99, LS3, LSA)Rectangle Port Intakes only!
- Fabricated Aluminum Sheet Metal Intake Manifold -102MM Throttle Body -Fuel Rails & Cross Over -4-Bolt LSX - Gaskets & Hardware are included.
- Intake is about 2 taller than stock.
- Throttle Body is Dive by Cable Overview We Designed Our Fabricated Aluminum Sheet Metal Intake Manifold to Improve the Look and Performance of Your LS Engine.
- See more on Amazon...
Fabricated Aluminum Sheet Metal Intake Manifold -102Mm Throttle Body -Fuel Rails & Cross Over -4-Bolt Lsx - Gaskets & Hardware Are Included..
Throttle Body Is Dive By Cable Overview We Designed Our Fabricated Aluminum Sheet Metal Intake Manifold To Improve The Look And Performance Of Your Ls Engine..
Intake Is About 2" Taller Than Stock..
Compatible With: Chevrolet Small Block V8 Gen. Iii/Iv (Ls-Based) · 4.8 L / 293 In3 (L20, Ly2) · 5.3 L / 325 In3 (Lc9, Lh6, Lh8, Lmg, Ly5) · 6.0 L / 364 In3 (L76, L96, Lfa, Ly6) · 6.2 L / 376 Ln3 (L92, L99, Ls3, Lsa)Rectangle Port Intakes Only!.
Brand: A-Team Performance | Manufacturer: A-Team Performance
See On Amazon #18
COMP Cams 15853-16 Short Travel Retro-Fit Hydraulic Roller Lifter Set for Chevrolet Small Block
Asin: B004QOK1OQ | Model: 15853-16 | PartNumber: 15853-16 | Ean: 0036584186663 | UPC: 036584186663
Features
- For Small Block Chevy engines with OE flat tappet camshaft
- .005 inches recommended preload
- .842 inches diameter; 152 gram weight; 2.66 inches seat height
- Limits the lifter s internal piston movement for increased durability & performance at higher rpm
- REM-surfaced and black oxidized to reduce valve train friction, wear and lubrication temperatures
- See more on Amazon...
.842 Inches Diameter; 152 Gram Weight; 2.66 Inches Seat Height.
Rem-Surfaced And Black Oxidized To Reduce Valve Train Friction, Wear And Lubrication Temperatures.
Limits The Lifter’S Internal Piston Movement For Increased Durability & Performance At Higher Rpm.
.005 Inches Recommended Preload.
First Available: 09/11/2012
Brand: Comp Cams | Manufacturer: COMP Cams
Dimensions: 3.15 x 1.97 x 1.97 inches | Weight: 5.00 pounds
Warranty: 1 Year Limited
See On Amazon #19
Engine Rebuild Overhaul Kit FITS: 2003-2004 Chevrolet GMC 5.3L 5.3 5300 V8 LM7 Vortec
Asin: B07DFJJVX3 | Ean: 0707473071482 | UPC: 707473071482
Features
- This rebuild kit kit has all the parts you need to freshen up that worn engine. These parts are manufactured directly from only high quality companies with ISO, QS & TS quality systems in place. These are not cheap Chinese parts, this is a quality kit that will last.
- This rebuild kit will include: Full Gasket Set w/ MLS Head Gaskets, Press-Fit Dish-Top Pistons w/ Coated Skirts, Premium Piston Rings, Main/Rod Bearings, Late '03 Style Cam Bearings, 3pc Timing Set, Oil Pump, Freeze Plugs, Valve Stem Seals
- SIZES AVAILABLE: Pistons & Rings:STD, 020, 030, 040 --- Rod/Main Bearings:STD, 010, 020, 030
- AFTER YOU ORDER YOU NEED TO SEND US A MESSAGE LETTING US KNOW WHAT SIZE OF PARTS YOU WANT. THANKS!
- The pictures are accurate and show you the actual parts that you will be buying. Because of limits, sometimes not all the parts are pictured, but we always try to supply pics of the main pieces. If you have any other questions, feel free to send us a message, and we can usually get back to you within 1 business day. Thanks!
- See more on Amazon...
Sizes Available: Pistons & Rings:Std, 020, 030, 040 --- Rod/Main Bearings:Std, 010, 020, 030.
The Pictures Are Accurate And Show You The Actual Parts That You Will Be Buying. Because Of Limits, Sometimes Not All The Parts Are Pictured, But We Always Try To Supply Pics Of The Main Pieces. If You Have Any Other Questions, Feel Free To Send Us A Message, And We Can Usually Get Back To You Within 1 Business Day. Thanks!.
After You Order You Need To Send Us A Message Letting Us Know What Size Of Parts You Want. Thanks!.
This Rebuild Kit Will Include: Full Gasket Set W/ Mls Head Gaskets, Press-Fit Dish-Top Pistons W/ Coated Skirts, Premium Piston Rings, Main/Rod Bearings, Late '03 Style Cam Bearings, 3Pc Timing Set, Oil Pump, Freeze Plugs, Valve Stem Seals.
Brand: Enginetech | Manufacturer: Enginetech
Dimensions: 50.00 x 100.00 x 100.00 Centimeters | Weight: 1.00 pounds
Warranty: 1 YEAR MANUFACTURER WARRANTY
See On Amazon #20
EMP Stewart Components Stewart Components 50005 Pro Series Short Water Pump for Small Block Chevy Engine
Asin: B00D1OA4G2 | Model: 50005 | PartNumber: 50005 | Ean: 0191215133369 | UPC: 191215133369
Features
- Item Package Dimension: 14.5L x 8.6W x 8.3H inches
- Item Package Weight - 8.15 Pounds
- Item Package Quantity - 1
- Product Type - ENGINE WATER PUMP
- See more on Amazon...
Item Package Quantity - 1.
Product Type - Engine Water Pump.
Item Package Weight - 8.15 Pounds.
Brand: EMP Stewart Components | Manufacturer: Stewart Components
Dimensions: 8.70 x 14.40 x 8.40 inches | Weight: 7.92 pounds
See On Amazon #21
1958-86 Compatible/Replacement for Chevy Small Block 283-305-327-350-400 Short Polished Aluminum Valve Covers - Smooth
Asin: B003329QOS | Model: HZ-6031 | PartNumber: HZ-6031
Features
- Chevy small block smooth polished aluminum valve covers fit 1958-86 Chevy 283-305-327-350-400 small block engines.
- They are baffled and short (OEM) style.
- There is one hole in each cover.
- Height 2-9/16.
- See more on Amazon...
There Is One Hole In Each Cover..
Height 2-9/16"..
They Are Baffled And Short (Oem) Style..
Brand: CFR Performance | Manufacturer: CFR Performance
Dimensions: 4.00 x 4.00 x 4.00 inches | Weight: 7.00 pounds
See On Amazon #22
1965-72 Compatible/Replacement for Chevy Big Block 396-427-454 Short OEM Style (Recessed Corner) Steel Valve Covers - Chrome w/Dripper Rails
Asin: B002W7QE7M | Model: HZ-9504-1 | PartNumber: HZ-9504-1
Features
- Chevy Big block OEM style chrome steel valve covers fit 1965-72 Chevy 396-427-454 big block engines.
- They are baffled and short style.
- Driver side has a recessed corner for corvettes or cars with power brakes.
- Both covers have dripper rails.
- Height: 2-1/4.
- See more on Amazon...
Driver Side Has A Recessed Corner For Corvettes Or Cars With Power Brakes..
Height: 2-1/4"..
Both Covers Have Dripper Rails..
They Are Baffled And Short Style..
Brand: CFR Performance | Manufacturer: CFR Performance
Dimensions: 4.00 x 4.00 x 4.00 Inches
See On Amazon #23
1958-86 Compatible/Replacement for Chevy Small Block 283-305-327-350-400 Short Steel Valve Covers - Orange
Asin: B003092H72 | Model: HZ-9216-PO | PartNumber: HZ-9216-PO
Features
- Chevy small block short painted orange steel valve covers fit 1958-86 Chevy 283-305-327-350 small block engines
- They are baffled and short (OEM) style
- There is one hole in each cover
- Height: 2-5/8
- Valve Cover Material: Steel
- Valve Cover Mounting Style: Perimeter Bolt
- Valve Cover Top Style: Smooth
- Item DOES NOT include Breathers, Gaskets, or Grommets
- See more on Amazon...
There Is One Hole In Each Cover.
Valve Cover Top Style: Smooth.
Item Does Not Include Breathers, Gaskets, Or Grommets.
Valve Cover Material: Steel.
Valve Cover Mounting Style: Perimeter Bolt.
Height: 2-5/8 ".
They Are Baffled And Short (Oem) Style.
Brand: CFR Performance | Manufacturer: CFR Performance
Dimensions: 4.00 x 4.00 x 4.00 inches
See On Amazon #24
Crawford Performance B0402: Billet Power Block (BPB) Kit for 18+ Crosstrek 2.0i & 2.5i, 17+ Forester 2.5i, 17+ Impreza 2.0i, 15+ Legacy 2.5i, 15+ Outback 2.5i
Asin: B096L6P6BS | Model: B0402 | PartNumber: B0402 | Ean: 0854894008556 | UPC: 854894008556
Features
- Adds 15 HP / 22 TQ - No Tune Required
- Improves Acceleration
- Decreases Delay between Shifts with AT
- Increases the Volumetric Efficiency of your Intake Manifold
- Maximizes the Potential of Aftermarket Intakes
- See more on Amazon...
Decreases Delay Between Shifts With At.
Maximizes The Potential Of Aftermarket Intakes.
Increases The Volumetric Efficiency Of Your Intake Manifold.
Improves Acceleration.
First Available: 10/06/2021
Brand: Crawford Performance | Manufacturer: Crawford Performance
Warranty: Free Replacement on Manufacture Defect - (Applies only to BPB, not components)
See On Amazon #25
Cobra-Tek - CBK-HZ-6031-1-POL- Chevy SB Small Block Short Polished Aluminum Valve Covers Ball Milled, Fits Following Engines: 283, 302, 305, 307, 327, 400, 350.
Asin: B07WFYZNGR | Ean: 0695528070392 | UPC: 695528070392
Features
- Meets or exceeds all original equipment specifications
- Unsurpassed quality for you can trust
- Validated for fit, form and function
- Designed for repair and everyday environment
- xWe recommend you visit our store on Amazon
- See more on Amazon...
Validated For Fit, Form And Function.
Xwe Recommend You Visit Our Store On Amazon.
Designed For Repair And Everyday Environment.
Unsurpassed Quality For You Can Trust.
Brand: Cobra-Tek | Manufacturer: Cobra Tek
See On Amazon #26
Moroso 63858 Front Mandrel Drive Kit, Fits Big Block Chevy and other dampers w/ 3 x 3.2" Bolt Circle, Short Design
Asin: B001EMPWRE | Model: 63858 | PartNumber: 63858 | Ean: 0084663638589 | UPC: 084663638589
Features
- Bolts to balancer balancer does not need to be drilled like older designs Pulleys are hard coat anodized and mandrel is black oxide for exceptional strength and extended service life Kits include: one-piece, forged steel drive mandrel, 4" V-belt pulley for alternator, 2-1 2" V-belt pulley for vacuum pump, 1" (16 tooth) Gilmer pulley for external oil pump, guide plates, assorted spacers, belt guides and hardware
- See more on Amazon...
Brand: Moroso | Manufacturer: Moroso
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 4.10 pounds
Warranty: 90 Day Manufacturer
See On Amazon #27
Aramox SWP Water Pump Pulley, Single Groove Short Water Pump Pulley Metal Replacement for Chevy Small Block Engine SBC 267 305 400
Asin: B0B51T4JS2
Features
- Fitment: Short water pump pulley, replacement for Chevy Small Block engine SBC 267 305 400, replacement for CHEVROLET SMALL BLOCK V8 GEN. I etc.
- High Performance: It connects to various engine drive components by a belt drive system and help ensure that components receive power from the rotating crankshaft to perform their vital functions.
- Professional Design: Designed for engines with short water pump, direct replacement for old or broken short pump v belt pulleys.
- Premium Material: High strength metal construction for maximum durability, strong rust resistance and easy installation.
- Strict Standards: Professionally manufactured according to the original standard, with stable characteristics and high reliability.
- See more on Amazon...
Professional Design: Designed For Engines With Short Water Pump, Direct Replacement For Old Or Broken Short Pump V‑Belt Pulleys..
Strict Standards: Professionally Manufactured According To The Original Standard, With Stable Characteristics And High Reliability..
Premium Material: High Strength Metal Construction For Maximum Durability, Strong Rust Resistance And Easy Installation..
High Performance: It Connects To Various Engine Drive Components By A Belt Drive System And Help Ensure That Components Receive Power From The Rotating Crankshaft To Perform Their Vital Functions..
Brand: Aramox | Manufacturer: Aramox
See On Amazon #28
1965-72 Compatible/Replacement for Chevy Big Block 396-427-454 Short OEM Style Steel Valve Covers - Orange
Asin: B005HY53OC | Model: HZ-9503-PO | PartNumber: HZ-9503-PO
Features
- Chevy big block OEM style painted orange steel valve covers fit 1965-72 Chevy 396-427-454 big block engines.
- They are baffled short style.
- Height: 2-5/8.
- See more on Amazon...
Height: 2-5/8"..
They Are Baffled Short Style..
Brand: CFR Performance | Manufacturer: CFR Performance
Dimensions: 4.00 x 4.00 x 4.00 inches
See On Amazon #29
DEMOTOR PERFORMANCE Finned Black Coated Short Valve Covers for Small Block Ford 1964-1973 260 289 302 351w engines
Asin: B01KUHCBU4
Features
- Finned Small Block Ford black-coated valve covers.
- Short style design: 3 1/4 in height
- Machined for 1 1/4 breathers.
- These valve covers are finned and would be a great addition to your classic Ford.
- Fits for Small Block Ford 1964-1973 260 289 302 351w engines (Will not fit 351C 351M and will not clear roller rockers).
- See more on Amazon...
Machined For 1 1/4" Breathers..
Fits For Small Block Ford 1964-1973 260 289 302 351W Engines (Will Not Fit 351C 351M And Will Not Clear Roller Rockers)..
These Valve Covers Are Finned And Would Be A Great Addition To Your Classic Ford..
Short Style Design: 3 1/4" In Height.
Brand: DEMOTOR PERFORMANCE | Manufacturer: DEMOTOR PERFORMANCE
Weight: 9.00 pounds
See On Amazon #30
SKPMGPAG Exhaust Header Shorty Header for Chevy/GMC 88-95 Trucks & SUVs 2WD/4WD C1500 K1500 305 350 with 5.0L/5.7L(305/350 cu. in.) V8 BLACK
Asin: B0CP37YYBM | Model: MGP-6871-BK | PartNumber: MGP-6871-BK
Features
- Fits 88-95 Chevy/GMC trucks & SUVs 2WD/4WD with 5.0L/5.7L(305/350 cu. in.)
- Shorty design for power gain from idle to mid-range RPM
- OE style ball socket collector connects to factory exhaust head pipe
- Fully mandrel bent tubes made of 16-gauge mild steel
- Head flanges laser-cut from 3/8-inch thick steel plates
- Flanges flattened by hydraulic press for precise and leak-free seal
- All joints TIG welded for resistance against cracking and wearing
- Black paint coating that withstands up to 500 degrees Celsius
- See more on Amazon...
Oe Style Ball Socket Collector Connects To Factory Exhaust Head Pipe.
All Joints Tig Welded For Resistance Against Cracking And Wearing.
Black Paint Coating That Withstands Up To 500 Degrees Celsius.
Head Flanges Laser-Cut From 3/8-Inch Thick Steel Plates.
Flanges Flattened By Hydraulic Press For Precise And Leak-Free Seal.
Fully Mandrel Bent Tubes Made Of 16-Gauge Mild Steel.
Shorty Design For Power Gain From Idle To Mid-Range Rpm.
Brand: SKPMGPAG | Manufacturer: Angong
See On Amazon
Looking For Something Else?
Search