Best 3D Printer Platforms - Buying Guide
Last Updated: 05/02/2024
Share on
Bestselling 3D Printer Platforms on Amazon
- Creality Official Ender 3 Glass Bed Upgraded, High Hardness Durable Glass Platform for 3D Printer, T...
- Mefine Creality Ender 3 Glass Bed Upgraded 3D Printer Tempered Glass Plate Build Surface for Ender 3...
- Creality Original Ultra Removable Magnetic 3D Printer Build Surface Heated Bed Cover for Ender 3/End...
- RETUXEP 3D Printer PEO PET Bambu Labs Build Plate for Bambu Lab X1C/X1/X1E/P1P/P1S/A1,Diamond PEO+Ca...
- RETUXEP H1H 3D Printer Platform K1 K1C Sheet 235x235m,Smooth H1H Build Plate Spring Steel Print Bed ...
- FLASHFORGE Adventurer 5M Series Upgrade PEI Powder-Coated Platform, Tool-Free Model Removal, Automat...
- 3PCS Creality Original Heat Bed Platform Sticker Sheet, Hot Bed Build Surface Tape 235x235mm for Cre...
- SUNLU Magnetic Build Surface, Good Adhesion, 3pcs Flexible Removable Build Platforms for 3D Printers...
- Anycubic PEI Spring Steel Magnetic Platform Stronger Adhesion, Compatible with Anycubic Kobra 2 Max ...
- Creality Ender 3 Glass Bed Upgraded 3D Printer Platform Tempered Glass Plate Build Surface with Glas...
#1
Creality Official Ender 3 Glass Bed Upgraded, High Hardness Durable Glass Platform for 3D Printer, Tempered Glass Build Plate for Ender 3 Pro, Ender 5, Ender 5 Pro, Ender 3 V2, 235x235 4mm
Asin: B08XXVWN11 | Model: 6004010007 | PartNumber: 6004010007 | Ean: 0633690247198 | UPC: 633690247198
Features
- Easy to Remove Model within 1 Minute: The coating of the microporous composite material has a microporous structure. The filament will be 'extruded' due to the reduction of platform temperature and shrinkage of composite materials, which makes the model remove easily.
- High Viscosity and Strong Adhesion: Composite nano molecule coating has high viscosity after heating, which makes the model have strong adhesion.
- 0.15MM of Flatness Recovery Model: This is the combination of glass and composite. Due to the flatness of glass and the uniform composite coating of surface 'lattice', the platform has excellent flatness.
- Wear-Resistant and Scratch-Resistant, easy to clean: There is a protective film on the surface of the composite coating, which is of anti-scratch and dustproof, etc.
- High Hardness and Durable: This is the combination of chemically tempered glass and surface composite coating. The flatness of glass will be much better and the composite coating of surface 'lattice' will be uniform, which makes the platform have excellent flatness.
- See more on Amazon...
0.15Mm Of Flatness Recovery Model: This Is The Combination Of Glass And Composite. Due To The Flatness Of Glass And The Uniform Composite Coating Of Surface 'Lattice', The Platform Has Excellent Flatness..
High Hardness And Durable: This Is The Combination Of Chemically Tempered Glass And Surface Composite Coating. The Flatness Of Glass Will Be Much Better And The Composite Coating Of Surface 'Lattice' Will Be Uniform, Which Makes The Platform Have Excellent Flatness..
Wear-Resistant And Scratch-Resistant, Easy To Clean: There Is A Protective Film On The Surface Of The Composite Coating, Which Is Of Anti-Scratch And Dustproof, Etc..
High Viscosity And Strong Adhesion: Composite Nano Molecule Coating Has High Viscosity After Heating, Which Makes The Model Have Strong Adhesion..
First Available: 03/30/2023
Brand: UNIDO | Manufacturer: Unido
Dimensions: 0.16 x 9.25 x 9.25 inches
Warranty: 2 year manufacturer
See On Amazon #2
Mefine Creality Ender 3 Glass Bed Upgraded 3D Printer Tempered Glass Plate Build Surface for Ender 3/Ender 3 Pro/Ender 3 V2/Ender 5/Ender 5 Pro/Ender 3 S1, 235x235x4mm
Asin: B08CXLLCH4 | Model: Ender3GLB | PartNumber: Ender3GLB | Ean: 0778992842808 | UPC: 778992842808
Features
- Compatibility: Officially authorized Creality glass bed, applicable for Creality 3D printers Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 Neo, Ender 3 V2 Neo, Ender-5, CR-20, CR-20 Pro, other 3D printers with a print area of 220*220mm(note for Ender 5 S1) and most of the Cartesian style 3D printers with an MK2 MK3 hotbed. Please make sure the printing size of your printer's platform is compatible. and to be compatible with Ender-3 S1/Ender-3 S1 Pro, please remove the two positioning screws on the hotbed first.
- No Edge Curling: The composite coating of our tempered glass bed has super strong adhesion after heating, prints can be stuck on the build surface firmly without glue, avoiding the issue of the print's edges curling. Equipped with 4 clips to fix the hotbed.
- Easy to Remove: It is very easy to remove the prints. The surface of our tempered glass bed is a layer of the microporous composite coating. It will contract as the hot bed cooling which greatly ensures the prints can be removed manually without any tools.
- Excellent Flatness: Upgraded ender 3 build plate with smaller CREALITY logo provides a flatter and smoother build surface than a magnetic mat or PEI sticker, ensuring high flatness for the bottom of mold during 3D printing.
- High-Grade Material: Made of 100% Genuine Borosilicate Glass, thick and high quality. The glass bed's hardness is up to 8 Mohs and is capable to work up to 400 . Wipe clean with water to start the next print. Scrubbing the glass platform with alcohol is not recommended, it can damage the surface coating which increases adhesion. We offer a 90-day free replacement, any problems, feel free to get in touch with us.
- See more on Amazon...
Easy To Remove: It Is Very Easy To Remove The Prints. The Surface Of Our Tempered Glass Bed Is A Layer Of The Microporous Composite Coating. It Will Contract As The Hot Bed Cooling Which Greatly Ensures The Prints Can Be Removed Manually Without Any Tools..
High-Grade Material: Made Of 100% Genuine Borosilicate Glass, Thick And High Quality. The Glass Bed's Hardness Is Up To 8 Mohs And Is Capable To Work Up To 400 ℃. Wipe Clean With Water To Start The Next Print. Scrubbing The Glass Platform With Alcohol Is Not Recommended, It Can Damage The Surface Coating Which Increases Adhesion. We Offer A 90-Day Free Replacement, Any Problems, Feel Free To Get In Touch With Us..
Excellent Flatness: Upgraded Ender 3 Build Plate With Smaller Creality Logo Provides A Flatter And Smoother Build Surface Than A Magnetic Mat Or Pei Sticker, Ensuring High Flatness For The Bottom Of Mold During 3D Printing..
No Edge Curling: The Composite Coating Of Our Tempered Glass Bed Has Super Strong Adhesion After Heating, Prints Can Be Stuck On The Build Surface Firmly Without Glue, Avoiding The Issue Of The Print's Edges Curling. Equipped With 4 Clips To Fix The Hotbed..
Brand: Mefine | Manufacturer: Mefine
See On Amazon #3
Creality Original Ultra Removable Magnetic 3D Printer Build Surface Heated Bed Cover for Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 V2 Neo/Ender 3 Neo/Ender 3 S1/3 S1 Pro/Ender 5 Pro 3D Printer 235X235MM
Asin: B07X3WBNPX
Features
- ATTENTION BEFORE USE Firstly, please make sure the bottom of the soft magnetic sticker and the top layer are firmly adsorbed before installation. If it cannot be adsorbed, please rotate it 90 degrees and try again until they are completely adsorbed and will not separate. Secondly, after finding the correct magnetic direction, then you can stick the bottom part on the hot bed. Please pay attention to the direction before installation.
- ALL NEW FUNCTIONALITY: Introducing the first ever removable, magnetically secured, build surface for hassle free model removal.It is recommended to heat the hot bed for 2-3 minutes before removing the model with the removal tools.
- EASY MODEL REMOVAL: The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible. Simply print on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands.
- CUSTOMIZABLE: The flexible surface can easily be cut to any demensions making it perfect for all build sizes and all FDM printer models.
- SIMPLE INSTALLATION & UNIVERSAL: Build surface comes with upper magnetic build surface and lower magnetic adhesive base. Place lower 3M adhesive surface on top of normal build plate.Works with all FDM printer models, and all heated and non-heated 3D printer beds.
- See more on Amazon...
Easy Model Removal: The First 3D Printing Surface Designed With Model Removal In Mind. This Surface Is Easily Removed, And Flexible. Simply Print On The Surface, Remove The Upper Magnetic Surface From The Lower, Bend The Flexible Surface And Watch The Model Fall Right Into Your Hands..
Simple Installation & Universal: Build Surface Comes With Upper Magnetic Build Surface And Lower Magnetic Adhesive Base. Place Lower 3M Adhesive Surface On Top Of Normal Build Plate.Works With All Fdm Printer Models, And All Heated And Non-Heated 3D Printer Beds..
Customizable: The Flexible Surface Can Easily Be Cut To Any Demensions Making It Perfect For All Build Sizes And All Fdm Printer Models..
All New Functionality: Introducing The First Ever Removable, Magnetically Secured, Build Surface For Hassle Free Model Removal.It Is Recommended To Heat The Hot Bed For 2-3 Minutes Before Removing The Model With The Removal Tools..
Brand: Comgrow | Manufacturer: Creality 3D
Dimensions: 0.20 x 9.25 x 9.25 Inches | Weight: 0.66 pounds
See On Amazon #4
RETUXEP 3D Printer PEO PET Bambu Labs Build Plate for Bambu Lab X1C/X1/X1E/P1P/P1S/A1,Diamond PEO+Carbon Fiber PET Spring Steel Sheet Plate 257x257mm Flexible Bambu A1 3D Printer Plate
Asin: B0CQT3CKR6
Features
- PEO & PET Combined We combine diamond PEO and carbon fiber PET with one spring steel plate.
- Excellent Adhesion For First Printing Layer We recommend these filaments & temperatures for the PEO+PET bambu build plate PLA: 60~65 ; PETG: 70-80 .
- Clean PEO PEI Build Plate Before Use To get better adhesion, please clean and clean well. Give it a very good spray with isopropyl and wipe with lint free towel between each print. Any tiny bit of oil or residue will make your print non-stick.
- Compatible Filaments PEO PET bambu labs build plate surface can print PLA and TPU and PETG. You'll need glue if you print other materials.
- Compatible Printers Our double-sided PEO PET build plate fits 3D printers with a platform size of 257x257mm, compatible for Bambu Lab X1C/X1/X1E/P1P/P1S/A1.
- See more on Amazon...
【Clean Peo Pei Build Plate Before Use】To Get Better Adhesion, Please Clean And Clean Well. Give It A Very Good Spray With Isopropyl And Wipe With Lint Free Towel Between Each Print. Any Tiny Bit Of Oil Or Residue Will Make Your Print Non-Stick..
【Compatible Printers】Our Double-Sided Peo Pet Build Plate Fits 3D Printers With A Platform Size Of 257X257mm, Compatible For Bambu Lab X1c/X1/X1e/P1p/P1s/A1..
【Compatible Filaments】Peo Pet Bambu Labs Build Plate Surface Can Print Pla And Tpu And Petg. You'll Need Glue If You Print Other Materials..
【Excellent Adhesion For First Printing Layer】We Recommend These Filaments & Temperatures For The Peo+Pet Bambu Build Plate “Pla: 60~65℃; Petg: 70-80℃”..
Brand: RETUXEP | Manufacturer: AIYANQI
See On Amazon #5
RETUXEP H1H 3D Printer Platform K1 K1C Sheet 235x235m,Smooth H1H Build Plate Spring Steel Print Bed (no Magnetic Base) for Creality K1/K1C/Ender 5 S1/Ender 3 S1 Pro/Ender 3 S1/Ender V3 KE/Ender3 V3 SE
Asin: B0CX8MWLLZ
Features
- Compatible Printer 235x235mm Double sided H1H surface spring steel sheet with 2 holes, compatible with Ender 3 Neo/Ender 3 V2 Neo/Ender 3 S1/Ender 5 S1/Ender 3 V3/Ender 3 V3 SE/Ender 3 V3 KE/K1/K1C CR-20/ CR-20 Pro/ Voxelab Aquila/Voxelab Aquila C1/ Voxelab Aquila C2, and other similarly-sized FDM 3D printers.
- Excellent adhesion for first printing layer The H1H spring steel flexible build plate has a good adhesive, even better than smooth PEI PET or PEO. It even can stick well without heating the platform, no glue is needed.Please let the build plate cool down before remove the model to avoid damaging the coating.
- Easy to Maintain The light beam or phantom pattern of the printed model may fade or disappear if wiped with hands or other oily objects, but don't worry, wiping the surface with a wet tissue or alcohol, the starry pattern can be reappeared !!!
- Compatible Filaments The H1H plate can withstand high temperature 200 . We recommend the H1H build plate to print PLA /PETG /TPU /ABS, If you want to print other filaments, please adjust the parameters.
- High Resistance The H1H print bed surface is resistant to high temperature 200 C .
- See more on Amazon...
【Easy To Maintain】The Light Beam Or Phantom Pattern Of The Printed Model May Fade Or Disappear If Wiped With Hands Or Other Oily Objects, But Don't Worry, Wiping The Surface With A Wet Tissue Or Alcohol, The Starry Pattern Can Be Reappeared !!!.
【High Resistance】The H1h Print Bed Surface Is Resistant To High Temperature 200°C ..
【Compatible Filaments】The H1h Plate Can Withstand High Temperature 200℃. We Recommend The H1h Build Plate To Print Pla /Petg /Tpu /Abs, If You Want To Print Other Filaments, Please Adjust The Parameters..
【Excellent Adhesion For First Printing Layer】The H1h Spring Steel Flexible Build Plate Has A Good Adhesive, Even Better Than Smooth Pei Pet Or Peo. It Even Can Stick Well Without Heating The Platform, No Glue Is Needed.Please Let The Build Plate Cool Down Before Remove The Model To Avoid Damaging The Coating..
Brand: RETUXEP | Manufacturer: AIYANQI
See On Amazon #6
FLASHFORGE Adventurer 5M Series Upgrade PEI Powder-Coated Platform, Tool-Free Model Removal, Automatic Separation After Cooling
Asin: B0CL29SXH5
Features
- Multi-Platform Options: PEI Powder Coated, Smooth PEI, and Smooth PC plates. Tailor your 3D printing experience by choosing the perfect platform to meet your unique needs.
- Smooth PEI Platform: This platform features a smooth surface that facilitates a flawless bottom finish for printed models. Offering excellent adhesion for PLA, PETG, and TPU, without the need for glue.
- PEI Powder-Coated Platform: It boasts a distinctive textured surface that imparts a unique finish to the bottom of your models. It sets itself apart, although it's worth noting that for certain filaments, the application of glue may be necessary.
- Smooth PC Platform: With high-temperature stability, this platform is suitable for advanced printing with materials like ABS, PC, and ASA. Additionally, it offers strong adhesion, eliminating the need for glue with most materials.
- Effortless Model Removal: Simply cool to room temperature, and the model effortlessly separates from the build plate. However, bending the platform is necessary when removing models from a PC platform.
- See more on Amazon...
Pei Powder-Coated Platform: It Boasts A Distinctive Textured Surface That Imparts A Unique Finish To The Bottom Of Your Models. It Sets Itself Apart, Although It's Worth Noting That For Certain Filaments, The Application Of Glue May Be Necessary..
Effortless Model Removal: Simply Cool To Room Temperature, And The Model Effortlessly Separates From The Build Plate. However, Bending The Platform Is Necessary When Removing Models From A Pc Platform..
Smooth Pc Platform: With High-Temperature Stability, This Platform Is Suitable For Advanced Printing With Materials Like Abs, Pc, And Asa. Additionally, It Offers Strong Adhesion, Eliminating The Need For Glue With Most Materials..
Smooth Pei Platform: This Platform Features A Smooth Surface That Facilitates A Flawless Bottom Finish For Printed Models. Offering Excellent Adhesion For Pla, Petg, And Tpu, Without The Need For Glue..
Brand: FLASHFORGE | Manufacturer: Zhejiang Flashforge 3D Technology Co., Ltd.
See On Amazon #7
3PCS Creality Original Heat Bed Platform Sticker Sheet, Hot Bed Build Surface Tape 235x235mm for Creality Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 V2 Neo/Ender 3 Neo/Ender 3 S1/Ender 3 S1 Pro/5
Asin: B07FQWTZ3Y | Ean: 0649910300666 | UPC: 649910300666
Features
- Size: 235mm x 235mm.
- Build sheet adheres to the hot bed to help the filament stuck during printing, while also helping remove the printed model afterward.
- Compatible with ABS, PLA, HIPS, and another filament. Works with all FDM printer models.
- Single sheet design installs more quickly and with fewer bubbles than tape or films.
- Durable construction allows for multiple uses with either the same or different filament materials.
- See more on Amazon...
Compatible With Abs, Pla, Hips, And Another Filament. Works With All Fdm Printer Models..
Durable Construction Allows For Multiple Uses With Either The Same Or Different Filament Materials..
Single Sheet Design Installs More Quickly And With Fewer Bubbles Than Tape Or Films..
Build Sheet Adheres To The Hot Bed To Help The Filament Stuck During Printing, While Also Helping Remove The Printed Model Afterward..
Brand: Comgrow | Manufacturer: Creality 3D
Dimensions: 0.30 x 9.25 x 9.25 inches
See On Amazon #8
SUNLU Magnetic Build Surface, Good Adhesion, 3pcs Flexible Removable Build Platforms for 3D Printers Ender 3 5 T3, Heated Bed Cover, 9.25x9.25inchs (235x235mm), 2 Coating Surface+1 Base Sticker Sheet
Asin: B0B9M3QTFL | Model: 3D Printer Platforms Magnetic Surface | PartNumber: 3D Printer Platforms Magnetic Surface
Features
- Please double-check before attaching the base plate sheet: Stick half of sticker base sheet with coating surface sheet and lift it up. It is correct if both sheets can be lifted at the same time. If the two sheets can't be lifted at the same time, please rotate one of them 90 .
- Easy to Install The magnetic plate is very easy to install. The sticker base sheet has a good adhesive on the back side, just paste the base sheet to the printer heated bed, and then put the coating surface sheet on the base sheet, ready to print.
- Good Adhesion The magnetic built surface has a special coating layer, which makes the filaments can stick to the printed bed easily and reduces warping.
- Easy to Remove The magnetic build plate is removable and flexible, just gently bend the print surface, remove the 3D printing model easily.
- Fast Heat Conduction The thermal conductivity of SUNLU magnetic build plate is very good, which can speed up the heating rate, and reduce printing waiting time.
- Heating Range The heating range is 0-100 degrees, which is compatible with most FDM 3D printer filaments. PLA PLA Plus TPU ABS PETG ASA Nylon Others.
- Packing List (3PCS) SUNLU 3D Printer Magnetic Build Plate. 3 pieces sheet in total: 2 pieces of coating surface sheets and 1 piece of sticker base sheet.
- See more on Amazon...
②【Good Adhesion】The Magnetic Built Surface Has A Special Coating Layer, Which Makes The Filaments Can Stick To The Printed Bed Easily And Reduces Warping..
⑥【Packing List (3Pcs)】Sunlu 3D Printer Magnetic Build Plate. 3 Pieces Sheet In Total: 2 Pieces Of Coating Surface Sheets And 1 Piece Of Sticker Base Sheet..
④【Fast Heat Conduction】The Thermal Conductivity Of Sunlu Magnetic Build Plate Is Very Good, Which Can Speed Up The Heating Rate, And Reduce Printing Waiting Time..
⑤【Heating Range】The Heating Range Is 0-100 Degrees, Which Is Compatible With Most Fdm 3D Printer Filaments. Pla、Pla Plus、Tpu、Abs、Petg、Asa、Nylon、Others..
③【Easy To Remove】The Magnetic Build Plate Is Removable And Flexible, Just Gently Bend The Print Surface, Remove The 3D Printing Model Easily..
①【Easy To Install】The Magnetic Plate Is Very Easy To Install. The Sticker Base Sheet Has A Good Adhesive On The Back Side, Just Paste The Base Sheet To The Printer Heated Bed, And Then Put The Coating Surface Sheet On The Base Sheet, Ready To Print..
Brand: SUNLU | Manufacturer: SUNLU
Weight: 0.88 Pounds
See On Amazon #9
Anycubic PEI Spring Steel Magnetic Platform Stronger Adhesion, Compatible with Anycubic Kobra 2 Max 3D Printer Easy to Move Models 18.72 x 18.68 x 1.1 Inches
Asin: B0CHJ5JRMV
Features
- Application Compatible with Anycubic Kobra 2 Max 3D Printer
- Higher Durability PEI Spring Steel Magnetic Platform has higher durability. More flexible and more easier to bend, avoiding damages during the printing process
- Easy to Remove Easier removal of printed models from the resin build surface. Just need to slightly bend it
- Size& Weight Size 4.18.72 x 18.68 x 1.1 inches and Weight 1.84 Pounds
- Excellent Customer Service & Strict Test Enjoy a great shopping experience. If you have any qusetions or needs, please be free to contact us at amazonsupport@anycubic.com
- See more on Amazon...
【Easy To Remove】Easier Removal Of Printed Models From The Resin Build Surface. Just Need To Slightly Bend It.
【Excellent Customer Service & Strict Test】 Enjoy A Great Shopping Experience. If You Have Any Qusetions Or Needs, Please Be Free To Contact Us At Amazonsupport@Anycubic.Com.
【Size& Weight】Size 4.18.72 X 18.68 X 1.1 Inches And Weight 1.84 Pounds.
【Higher Durability】Pei Spring Steel Magnetic Platform Has Higher Durability. More Flexible And More Easier To Bend, Avoiding Damages During The Printing Process.
Brand: ANYCUBIC | Manufacturer: ANYCUBIC
See On Amazon #10
Creality Ender 3 Glass Bed Upgraded 3D Printer Platform Tempered Glass Plate Build Surface with Glass Clips, 235x235x4mm, for Ender 3 Pro/V2/S1/S1 Pro/V2 Neo, Ender 5 Pro,CR 20/pro Heated Bed Glass
Asin: B08Y5SNY7S | Model: ENO-Ender3-CB-Glass | PartNumber: ENO-Ender3-CB-Glass | Ean: 0705300791909 | UPC: 705300791909
Features
- Creality upgraded Ender 3 glass bed carborundum tempered glass plate.
- Excellent adhesion: Ultrabase covered by microporous coating, shows strong adhesion in printing. Easy to take off models by hand or with a little help from the scrapper for very large models.
- Super flatness, fast and uniform heating.
- DURABLE: The special coating is inorganic and has a hardness of 8 Mohs, and it is capable to work at 400 .
- Compatibility: perfectly suitable for the Ender 3/pro/V2/S1/S1 Pro/V2 Neo, ender 5/pro,CR 20/pro, CP-01,compatible with all the Cartesian style 3D printer with a MK3 heated bed of 235 235mm.
- See more on Amazon...
Super Flatness, Fast And Uniform Heating..
Compatibility: Perfectly Suitable For The Ender 3/Pro/V2/S1/S1 Pro/V2 Neo, Ender 5/Pro,Cr 20/Pro, Cp-01,Compatible With All The Cartesian Style 3D Printer With A Mk3 Heated Bed Of 235×235Mm..
Durable: The Special Coating Is Inorganic And Has A Hardness Of 8 Mohs, And It Is Capable To Work At 400℃..
Excellent Adhesion: Ultrabase Covered By Microporous Coating, Shows Strong Adhesion In Printing. Easy To Take Off Models By Hand Or With A Little Help From The Scrapper For Very Large Models..
Brand: ENOMAKER | Manufacturer: ENOMAKER
See On Amazon #11
Official Creality Ender 3 V3 SE Build Plate, Original PEI 3D Printer Platform Kit 235x235mm Flexible Spring Steel Texture Surface Print Bed for Ender 3/3 S1/3S1 Pro/3 Neo/3 V2 Neo/3 V3 KE/3 V3/K1/K1C
Asin: B0CJTXJT24
Features
- Quality Assurance 100% Official Creality Ender 3 V3 SE build plate, original 235*235mm spring steel removable flexible textured heated bed platform. The spring steel plate can withstand the numerous heat cycles that a 3D printer bed goes through from print to print.
- Easy to Remove Printed Models Easy to remove the prints without tools, just take out the spring steel plate and slightly flex it repeatedly to pop your prints right off. No need to scratch, pry and damage your prints!
- Great Adhesion More Stable A distinctive frosted feel given by the special rough frosted surface of the plate. Higher adhesion of models, not easy to warp while firmly locks creativity during the printing process.
- Wide Application 235*235mm spring steel build plate 3d printer bed compatible with Ender 3/ Ender 3 v2/ Ender 5/ Ender 3 S1/Ender 3 S1 Pro/Ender 5 S1/Ender 3 Neo/Ender 3 V2 Neo/Ender 3 V3 SE/Ender 3 V3 KE/3V3 CR 10 SE/K1/K1C and other same-sized beds. After replacing the printing bed, please level the bed again for better printing results.
- After Sales Support We provide professional after-sales service. Please kindly contact us(seller) via ask a question find us directly cause our customer service will respond to you within 24 hours no matter what the question.
- See more on Amazon...
【Great Adhesion More Stable】A Distinctive Frosted Feel Given By The Special Rough Frosted Surface Of The Plate. Higher Adhesion Of Models, Not Easy To Warp While Firmly Locks Creativity During The Printing Process..
【After Sales Support】We Provide Professional After-Sales Service. Please Kindly Contact Us(Seller) Via "Ask A Question" Find Us Directly Cause Our Customer Service Will Respond To You Within 24 Hours No Matter What The Question..
【Wide Application】235*235Mm Spring Steel Build Plate 3D Printer Bed Compatible With Ender 3/ Ender 3 V2/ Ender 5/ Ender 3 S1/Ender 3 S1 Pro/Ender 5 S1/Ender 3 Neo/Ender 3 V2 Neo/Ender 3 V3 Se/Ender 3 V3 Ke/3V3 Cr 10 Se/K1/K1c And Other Same-Sized Beds. After Replacing The Printing Bed, Please Level The Bed Again For Better Printing Results..
【Easy To Remove Printed Models】Easy To Remove The Prints Without Tools, Just Take Out The Spring Steel Plate And Slightly Flex It Repeatedly To Pop Your Prints Right Off. No Need To Scratch, Pry And Damage Your Prints!.
Brand: Creality | Manufacturer: Creality
Dimensions: 0.07 x 9.29 x 9.29 inches
See On Amazon #12
Creality Ender 3 Max Neo Glass Bed 3D Printer Platform, 310 x 320MM Tempered Glass Plate Build Surface for Ender-3 Max, CR-10 V2, CR-10 V3, CR-X, CR-X Pro, Good Adhesion Remove Easily
Asin: B0BY7XQPWV | Model: 3D-Glass-320x310 | PartNumber: 3D-Glass-320x310
Features
- Strong Adhesion & Remove Easily Adopted the technical principle of composite nano molecule, the glass bed has high viscosity after heating, ensuring that the filament won't move otherwhere. And the model does not warp or peel off during printing either. When the platform cools down, the microporous structure will contract, which allows the model to be easily removed.
- 8 Mohs Hardness The surface of the glass platform is covered inorganic coating, which plays an anti-scratch and dust-proof function. It can resistant to and used repeatedly without reducing performance. What's more, it is very easy to clean, the platform will be cleaned by using alcohol or acetone after using for several times.
- Great Flatness The glass platform offers 0.15mm of flatness due to the combination of glass and composite, ensuring giving smoother build surface than a magnetic sheet or PEI sticker. Its excellent flatness is effective to avoid leveling failure so as to high flatness for the bottom of the model.
- Wide Compatibility Carborundum glass platform is suitable for Creality 3d printer Ender-3 Max, Ender-3 Max Neo, CR-10 V2, CR-10 V3, CR-X, CR-X Pro, or other printers with a bed size of 310X320mm.
- After Sales Support We provide professional after-sales service. Please kindly contact us(seller) via ask a question find us directly cause our customer service will respond to you within 24 hours no matter what the question.
- See more on Amazon...
【Great Flatness】 The Glass Platform Offers 0.15Mm Of Flatness Due To The Combination Of Glass And Composite, Ensuring Giving Smoother Build Surface Than A Magnetic Sheet Or Pei Sticker. Its Excellent Flatness Is Effective To Avoid Leveling Failure So As To High Flatness For The Bottom Of The Model..
【After Sales Support】We Provide Professional After-Sales Service. Please Kindly Contact Us(Seller) Via “Ask A Question” Find Us Directly Cause Our Customer Service Will Respond To You Within 24 Hours No Matter What The Question..
【Wide Compatibility】Carborundum Glass Platform Is Suitable For Creality 3D Printer Ender-3 Max, Ender-3 Max Neo, Cr-10 V2, Cr-10 V3, Cr-X, Cr-X Pro, Or Other Printers With A Bed Size Of 310X320mm..
【8 Mohs Hardness】 The Surface Of The Glass Platform Is Covered Inorganic Coating, Which Plays An Anti-Scratch And Dust-Proof Function. It Can Resistant To And Used Repeatedly Without Reducing Performance. What's More, It Is Very Easy To Clean, The Platform Will Be Cleaned By Using Alcohol Or Acetone After Using For Several Times..
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #13
3D Printer Build Plate Smooth PEO + Smooth PET 257x257mm Spring Steel Sheet for Bambu Lab X1/X1C/X1E/P1P/P1S/A1 Flexible Sheet Removable Platform
Asin: B0CP5X3H2Z
Features
- Upgraded build plate Double-sided PEO+PET spring steel plate,One side is Small PEO film .Small PEO looks like countless diamonds on the surface,which make your eyes light up.The other side is smooth PET.the bottom of the printed model is smooth One build plate has two beautiful patterns. The bottom of the prints will leave a unique pattern.
- Excellent adhesion for first printing layer The model can be firmly attached to the surface of the print bed.Easily print even for a newbie. Please let the build plate cool down before remove the model to avoid damaging the coating.
- Easy to Remove The spring steel sheet can be bent to remove the model quickly, without the help of other tools. And the plate will return to flatness.
- High Resistance and Compatible Filaments The big PEO print bed surface is resistant to high temperature 150 and smooth PET coating bed is 150 . After our extensive testing, we recommend big PEO+PET to print PLA / TPU /PETG If you want to print other filaments, please adjust the parameters.
- Compatible 3D Printers The double-sided small PEO+smooth PET print bed suitable for 3D printers with 257x257mm platform size, such as suitable for Bambu Lab X1/X1C/X1E/P1P/P1S/A1. Please confirm your 3D printer platform size before ordering.
- See more on Amazon...
【 Easy To Remove】The Spring Steel Sheet Can Be Bent To Remove The Model Quickly, Without The Help Of Other Tools. And The Plate Will Return To Flatness..
【Compatible 3D Printers】The Double-Sided Small Peo+Smooth Pet Print Bed Suitable For 3D Printers With 257X257mm Platform Size, Such As Suitable For Bambu Lab X1/X1c/X1e/P1p/P1s/A1. Please Confirm Your 3D Printer Platform Size Before Ordering..
【High Resistance And Compatible Filaments】The Big Peo Print Bed Surface Is Resistant To High Temperature 150℃ And Smooth Pet Coating Bed Is 150℃. After Our Extensive Testing, We Recommend Big Peo+Pet To Print Pla / Tpu /Petg，If You Want To Print Other Filaments, Please Adjust The Parameters..
【Excellent Adhesion For First Printing Layer】The Model Can Be Firmly Attached To The Surface Of The Print Bed.Easily Print Even For A Newbie. Please Let The Build Plate Cool Down Before Remove The Model To Avoid Damaging The Coating..
Brand: Wefuit | Manufacturer: Wefuit
See On Amazon #14
DOBSTFY 3D Printing Build Surface,with Premium Adhesive 3D Printer Heat Bed Platform Sticker Sheet,for Ender 3/Ender 3 Pro/Ender 3 V2 Neo/Ender 3 V3 KE/Ender 3 V3 SE/4Pack 8.7x8.7inch(220mmx220mm)
Asin: B08SQ95V9Q | Model: 4PK 220 | PartNumber: 4PK 220
Features
- PACK of 4 The 220mmx220mm (8.7" x 8.7") 3D Printer build plate is fully matches heated bed for large format printers such as the Creality MK2, MK2A, MK3, Anet A8, Anet A6 with large build areas. also fits Anet A8, Cocoon 3D Printer Touch, Wanhao Duplicator 6 and Duplicator i3 and i3 Plus, TronXY X2, TronXY P802M, Ultimaker 1, MonoPrice Maker Select Plus and Ultimate and V2, Robo R2. And you can also cut to any size as 220x210mm, 6.5"x6.5" and more.u want
- High Quality Material High strength and heat resistance (up to 240 C) allows the 3D Printer surface to perform consistently in high temperature environments. The durability is similar PEI sheet but the price is much affordable than PEI. This hot bed sheet is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print. And this 3d build plate is also inherently flame resistant and low in smoke production.
- Easy to Install and Remove Thick 1mm building plates will not warp or bend under heat. It is used on top of your heated print bed and provides excellent results. Simply remove the 3M adhesive paper on back side then stick it on your heat bed. Or fix it just with clip around the edges. Print directly on to the building surface without the need for additional adhesives, tapes, or slurry.
- Fully Compatibly This 3D Printer heatbed platform sheet allows for multiple uses with either the same or different filament material. Compatible with ABS, PLA, HIPS, PET+, brick, wood, and flexible (TPE) filaments. Reuse for multiple prints, just wipe down with isopropyl alcohol between prints for best results.
- SATISFACTION GUARANTEED We're so confident that you'll love these premium print surfaces, that we offer a 90 day money back guarantee!
- See more on Amazon...
【Easy To Install And Remove】Thick 1Mm Building Plates Will Not Warp Or Bend Under Heat. It Is Used On Top Of Your Heated Print Bed And Provides Excellent Results. Simply Remove The 3M Adhesive Paper On Back Side Then Stick It On Your Heat Bed. Or Fix It Just With Clip Around The Edges. Print Directly On To The Building Surface Without The Need For Additional Adhesives, Tapes, Or Slurry..
【Satisfaction Guaranteed】We're So Confident That You'll Love These Premium Print Surfaces, That We Offer A 90 Day Money Back Guarantee!.
【Fully Compatibly】 This 3D Printer Heatbed Platform Sheet Allows For Multiple Uses With Either The Same Or Different Filament Material. Compatible With Abs, Pla, Hips, Pet+, Brick, Wood, And Flexible (Tpe) Filaments. Reuse For Multiple Prints, Just Wipe Down With Isopropyl Alcohol Between Prints For Best Results..
【High Quality Material】High Strength And Heat Resistance (Up To 240°C) Allows The 3D Printer Surface To Perform Consistently In High Temperature Environments. The Durability Is Similar Pei Sheet But The Price Is Much Affordable Than Pei. This Hot Bed Sheet Is Excellent Because It Can Withstand The Numerous Heat Cycles That A 3D Print Bed Goes Through From Print To Print. And This 3D Build Plate Is Also Inherently Flame Resistant And Low In Smoke Production..
Brand: DOBSTFY | Manufacturer: DOBSTFY
See On Amazon #15
YIBEICO 3D Printer Double Sided PEO PEI Build Plate for Bambu Lab X1C/X1/X1E/P1P/P1S/A1 3D Printer 257x257mm Flexible Platform (Smooth PEO+Smooth PET)
Asin: B0CR698ZH2 | Ean: 0720118813599 | UPC: 720118813599
Features
- Double Sided Textured Printing YIBEICO build plate combine diamond PEO and carbon fiber PET pattern on spring steel platepatterns for your printing
- Flexible and Easy to Remove The spring steel sheet is flexible. Prints can be easily removed by hand once the build surface has cooled, or you can bend the build plate after the plate cooled and remove the prints. The print mat won t be out of shape
- High Temperature Resistance The 3D Pinter Build Plate powder coating is heat resistant which temperature resistance can be up to 200 with no deformation,Please let the build plate cool down before remove the model to avoid damaging the coating
- Excellent Flatness The smooth and flat surface is flexible and removable. The PEI sheet can stick to magnetics very well. High strength and heat resistance. (Note: Please remove the transparent protective film on the surface before use)
- Compatible 3D Printers The Double-Sided Build Plate Print Bed Suitable For 3d Printers With 257x257mm Platform Size, Suitable For Bambu Lab X1C/X1/X1E/P1P/P1S/A1 Not For A1 Mini
- See more on Amazon...
【High Temperature Resistance】The 3D Pinter Build Plate Powder Coating Is Heat Resistant Which Temperature Resistance Can Be Up To 200℃ With No Deformation,Please Let The Build Plate Cool Down Before Remove The Model To Avoid Damaging The Coating.
【Compatible 3D Printers】The Double-Sided Build Plate Print Bed Suitable For 3D Printers With 257X257mm Platform Size, Suitable For Bambu Lab X1c/X1/X1e/P1p/P1s/A1（Not For A1 Mini）.
【Excellent Flatness】The Smooth And Flat Surface Is Flexible And Removable. The Pei Sheet Can Stick To Magnetics Very Well. High Strength And Heat Resistance. (Note: Please Remove The Transparent Protective Film On The Surface Before Use).
【Flexible And Easy To Remove】The Spring Steel Sheet Is Flexible. Prints Can Be Easily Removed By Hand Once The Build Surface Has Cooled, Or You Can Bend The Build Plate After The Plate Cooled And Remove The Prints. The Print Mat Won’T Be Out Of Shape.
Brand: YIBEICO | Manufacturer: YIBEICO
Dimensions: 0.30 x 11.00 x 11.00 inches | Weight: 0.63 pounds
See On Amazon #16
Imdinnogo 3D Printer Platform Bambulab X1 P1P P1S Multi Color PEY - Texture PEI Coating Build Plate 257x257mm: Newest Upgrade Accessories Transfer Shiny Star to Prints 10.1x10.1in Bczamd
Asin: B0CJ2QVRRS
Features
- 1. What a shiny print platform! This upgraded build plate will make the bottom of your prints more shine, and as you can see from our pictures and video, it takes the ordinary out of your prints! The PEY film is so different from other films, it has a pattern of stars and small dots on it, which will shine brightly, and when you look at it from different angles, different colors will be reflected, so beautiful. Believe me, when you get it, you will be shocked and love bambu lab build plate.
- 2. Multicolor patterns do not disappear with the number of prints! If you touch it with your hand, the pattern disappears. But when you wipe it with a damp towel or IPA and towel dry it, it will show the pattern again. If your nozzle accidentally scratches the PEY side of the steel plate, not a very deep scar, it will come back to life after a few prints, it is amazing. Needs to be under bright lights.
- 3. Support various filament printing: After our extensive testing, we recommend the PEY layer to print ABS/TPU/ PETG. (temperature suggestion: 50 C-70 C, 90 C). The PEI layer print PLA/ PLA-CF/ PETG/ PC/ ABS/ TPU/ Nylon etc. NOTE: Do not print Pla by the PEY side please.
- 4. This colorful PEI - PEY steel plate is not only available in 257x257mm but also in 196x190mm/ 235x235mm/ 254x241mm, suitable for Prussa mini MK2 MK3 MK3S MK3S+ MK4 Ender 3 Ender 3 V2 Ender 5, etc.
- 5. If you encounter any problems during the use, please feel free to contact us, we will do our best to provide you with a solution!
- See more on Amazon...
3. Support Various Filament Printing: After Our Extensive Testing, We Recommend The Pey Layer To Print Abs/Tpu/ Petg. (Temperature Suggestion: 50°C-70°C, ≤90°C). The Pei Layer Print Pla/ Pla-Cf/ Petg/ Pc/ Abs/ Tpu/ Nylon Etc. Note: Do Not Print Pla By The Pey Side Please..
5. If You Encounter Any Problems During The Use, Please Feel Free To Contact Us, We Will Do Our Best To Provide You With A Solution!.
4. This Colorful Pei - Pey Steel Plate Is Not Only Available In 257X257mm But Also In 196X190mm/ 235X235mm/ 254X241mm, Suitable For Prussa Mini Mk2 Mk3 Mk3s Mk3s+ Mk4 Ender 3 Ender 3 V2 Ender 5, Etc..
2. Multicolor Patterns Do Not Disappear With The Number Of Prints! If You Touch It With Your Hand, The Pattern Disappears. But When You Wipe It With A Damp Towel Or Ipa And Towel Dry It, It Will Show The Pattern Again. If Your Nozzle Accidentally Scratches The Pey Side Of The Steel Plate, Not A Very Deep Scar, It Will Come Back To Life After A Few Prints, It Is Amazing. Needs To Be Under Bright Lights..
Brand: Imdinnogo | Manufacturer: Aimengda
Dimensions: 0.30 x 10.11 x 10.11 inches | Weight: 0.55 pounds
See On Amazon #17
Anycubic PEI Spring Steel Magnetic Platform Replacement, Removable and Compatibility for Anycubic Kobra 2 Neo/Anycubic Kobra Neo/Anycubic Kobra 2/Anycubic Kobra 2 Pro/Anycubic Kobra Go/Anycubic Kobra
Asin: B0CHJ7LD79
Features
- Application Wider Compatibility for Anycubic Kobra 2 Neo/Anycubic Kobra Neo/Anycubic Kobra 2/Anycubic Kobra 2 Pro/Anycubic Kobra Go/Anycubic Kobra 3D Printer
- Great Adhesion Made by PEI special materials.It also has stronger adhesion to adhere the model
- More Flexible and Easier Easy to move your printing models as it's flexible. After cooling, the model is loose and can be took off easily
- High Temperature Resistance Withstands max temperature up to 260 . Tough durable and reliable replacement part
- Perfect Customer Service If you have any qusetions or needs, please be free to contact us at amazonsupport@anycubic.com . We would offer you an excellent after-sale service
- See more on Amazon...
【More Flexible And Easier】Easy To Move Your Printing Models As It's Flexible. After Cooling, The Model Is Loose And Can Be Took Off Easily.
【Perfect Customer Service】If You Have Any Qusetions Or Needs, Please Be Free To Contact Us At Amazonsupport@Anycubic.Com . We Would Offer You An Excellent After-Sale Service.
【High Temperature Resistance】Withstands Max Temperature Up To 260℃. Tough、Durable And Reliable Replacement Part.
【Great Adhesion】Made By Pei Special Materials.It Also Has Stronger Adhesion To Adhere The Model.
Brand: ANYCUBIC | Manufacturer: ANYCUBIC
See On Amazon #18
Imdinnogo 3D Printer Platform 257x257mm Dual Side Textured PEI Steel Sheet for Bambulab X1 X1C P1P P1S A1: Strong Adhesion Easy Prints Release Removable and Flexible Spring Build Plate BCZAMD
Asin: B0CRB1WJQX
Features
- 1. Only applicable to: Bambulab X1 X1C P1P P1S A1, not for A1 mini.
- 2. Excellent adhesion can be achieved when the temperature of the heated bed is about 60 , you can print directly on each side of the double sided PEI sheet without using any glue or other tools to help the model to stick onto the sheet. You do not need to worry about the prints curling with a 60 bed temperature.It also can print PETG very well, but the temperature of the hotbed needs to be about 80-85 .
- 3. Very easy to take prints: when the hot bed temperature drops to room temperature, just gently pick it up and remove it. If the filament is sticky, you need to bend the steel plate to remove the prints.
- 4. Compatible with a variety of filaments: PLA, PLA+, PETG, ABS, etc. You just need to set the temperature according to the temperature required by the filament, for example, PLA is 215 degrees Celsius for the nozzle and 30-50 degrees Celsius for the heat bed, while PETG is 250 degrees Celsius for the nozzle and 60-80 degrees Celsius for the heat bed. If you have tested the most suitable temperature, we would love to hear from you professionally.
- 5. We not only have double-sided PEI steel plate, but also sell PEY+PEI PEO+PEI, if you need, please feel free to contact us!
- See more on Amazon...
3. Very Easy To Take Prints: When The Hot Bed Temperature Drops To Room Temperature, Just Gently Pick It Up And Remove It. If The Filament Is Sticky, You Need To Bend The Steel Plate To Remove The Prints..
5. We Not Only Have Double-Sided Pei Steel Plate, But Also Sell Pey+Pei Peo+Pei, If You Need, Please Feel Free To Contact Us!.
4. Compatible With A Variety Of Filaments: Pla, Pla+, Petg, Abs, Etc. You Just Need To Set The Temperature According To The Temperature Required By The Filament, For Example, Pla Is 215 Degrees Celsius For The Nozzle And 30-50 Degrees Celsius For The Heat Bed, While Petg Is 250 Degrees Celsius For The Nozzle And 60-80 Degrees Celsius For The Heat Bed. If You Have Tested The Most Suitable Temperature, We Would Love To Hear From You Professionally..
2. Excellent Adhesion Can Be Achieved When The Temperature Of The Heated Bed Is About 60℃, You Can Print Directly On Each Side Of The Double Sided Pei Sheet Without Using Any Glue Or Other Tools To Help The Model To Stick Onto The Sheet. You Do Not Need To Worry About The Prints Curling With A 60℃ Bed Temperature.It Also Can Print Petg Very Well, But The Temperature Of The Hotbed Needs To Be About 80-85℃..
Brand: Imdinnogo | Manufacturer: Aimengda
Dimensions: 0.02 x 10.12 x 10.12 inches
See On Amazon #19
PEI Sheet Double-Sided Removable Magnetic 3D Printer Build Surface Heated Bed Cover for Ender 3/Ender 3 V2-Pro-S1/Ender 5-Pro/Ender 3 V3 SE-KE 3D Printer, Ender 3/5 Series Bed Upgraded 235mm x 235mm
Asin: B0C4QBC1ZR | Model: PEI-0509 | PartNumber: PEI-0509 | Ean: 0795847035284 | UPC: 795847035284
Features
- Wide Application: This PEI sheet is 235mm x 235mm, applicable to Ender3, Ender3 Pro, Ender3 V2, Ender3 S1, Ender3 S1 Pro, Ender3 Neo, Ender 3 V2 Neo, Ender5, Ender5 Pro and similarly sized FDM 3D printers. The PEI sheet is also compatible with various build plate types, including the Ender 3 build plate, Ender 3 bed plate, Ender 3 magnetic build plate, PEI build plate, Ender 3 glass build plate, and the Wham Bam flexible build plate, available for printing with PLA, PETG, PEEK, ABS or any other filaments.
- More Affordable and Practical: This build plate is made with 75% thicker PEI and 25% thicker spring steel than similar products on the market, providing a more durable plate that can handle the tough conditions of 24/7 printing. The magnet can sustain high temperatures of up to 120 C, making it wear-resistant and scratch-resistant. Besides, it's really easy to clean with a protective film on the surface of the composite coating, which is anti-scratch and dustproof.
- Excellent Adhesion: Our PEI sheet provides excellent adhesion for your prints, allowing them to stick securely to the printing surface while still being easy to remove. You can print directly onto each side of the double-sided sheet without glue or any other adhesives.
- Great Removal: When used in a 3D printing application, PEI is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print. The surface is easy to remove and flexible, allowing prints to come off the surface easily when it reaches room temperature. After the model printing is completed, just remove the upper magnetic surface from the lower, bend the flexible surface, and watch the model fall right into your hands.
- Simple Installation: This 3d printer bed is easy to install. Simply stick the magnetic bottom sheet onto your chosen build plate, and then place the steel platform with PEI surface on top. Easily replace an Ender 3 glass bed, or any other type of platform. The PEI sheet is flexible, removable and sticks to magnetics very well.
- See more on Amazon...
Excellent Adhesion: Our Pei Sheet Provides Excellent Adhesion For Your Prints, Allowing Them To Stick Securely To The Printing Surface While Still Being Easy To Remove. You Can Print Directly Onto Each Side Of The Double-Sided Sheet Without Glue Or Any Other Adhesives..
Simple Installation: This 3D Printer Bed Is Easy To Install. Simply Stick The Magnetic Bottom Sheet Onto Your Chosen Build Plate, And Then Place The Steel Platform With Pei Surface On Top. Easily Replace An Ender 3 Glass Bed, Or Any Other Type Of Platform. The Pei Sheet Is Flexible, Removable And Sticks To Magnetics Very Well..
Great Removal: When Used In A 3D Printing Application, Pei Is Excellent Because It Can Withstand The Numerous Heat Cycles That A 3D Print Bed Goes Through From Print To Print. The Surface Is Easy To Remove And Flexible, Allowing Prints To Come Off The Surface Easily When It Reaches Room Temperature. After The Model Printing Is Completed, Just Remove The Upper Magnetic Surface From The Lower, Bend The Flexible Surface, And Watch The Model Fall Right Into Your Hands..
More Affordable And Practical: This Build Plate Is Made With 75% Thicker Pei And 25% Thicker Spring Steel Than Similar Products On The Market, Providing A More Durable Plate That Can Handle The Tough Conditions Of 24/7 Printing. The Magnet Can Sustain High Temperatures Of Up To 120°C, Making It Wear-Resistant And Scratch-Resistant. Besides, It's Really Easy To Clean With A Protective Film On The Surface Of The Composite Coating, Which Is Anti-Scratch And Dustproof..
First Available: 05/20/2023
Brand: UNIDO | Manufacturer: Unido
See On Amazon #20
FYSETC 3D Platform Prusa i3 MK3S+ MK4 PEY Build Plate: Upgrade Smooth PEY - Textured PEI Spring Steel Sheet Flexible Hot Bed Cover Removable Print Bed for MK2 MK52 MK3 MK3S XL 3D Printer Bed 254x241mm
Asin: B0CJXLG5G1
Features
- Upgrade Prusa Build Plate A new Double Sided heated bed sheet: Smooth PEY + Textured PEI. One side is a textured PEI bed which presents the frosted surface with a distinctive frosted touch. Another side is coated with a smooth PEY sheet which has a Starry & Fine Sequins pattern that shines brightly. The most important thing, the Stars and Dots pattern will be left on the printing model, which brings endless fun to your 3d printing. How Beautiful and Magical!
- A New Shiny Prusa Bed Plate The smooth PEY side is the latest printing surface in Prusa i3 mk3 parts, Size 254X241mm/10x9.5inch. Flaring stars and dots fill the entire spring plate, which makes itself beautiful as a picture. Another magical thing, it presents different patterns under different intensities of light and angles. This is its distinctive feature from other 3d printer bed mats, such as peo plate, pei sheet or PET plate sheet etc.
- Wide 3D Printing Material Compatibility Support various 3d printer filaments. After testing, we recommend the PEY layer to print PLA/ TPU/ PETG (Temp Suggestion: 50 C-70 C, 90 C). The textured PEI plate print PLA/ PLA-CF/ PETG/ PC/ ABS/ TPU/ Nylon etc. Printing model is easy to adhere on PEI bed, has a great adhesion, and easy to be removed , just flex slightly to pop your prints right off. In some cases, remove the model directly without taking the printing bed from prusa mk3 3d printer.
- Proven Solution Made of high quality spring steel plate. Flexible, removable, high strength and heat resistance, dual-side design, thicker and more durable. Easy to use, put the printing plate onto the lab printer hot bed, then the print bed levelling will automatically go on while machine powered on. (Note:The smooth surface has a factory protective film that needs to be removed.)
- More Support All products are inspected before shipment. If you have any questions about product quality or suggestions, please feel free to contact us via your order ID. We are very grateful for your love and care for the product. 3D printer print bed is our main product, this kind of multicolor PEI - PEY steel plate is not only available in 254x241mm but also in 196x190mm - Prusa Mini/ 235x235mm - Ender 3 V2, Ender 5, Neptune3, Neptune4/ 257x257mm - Bambulab X1C P1P P1S.
- See more on Amazon...
【Wide 3D Printing Material Compatibility】Support Various 3D Printer Filaments. After Testing, We Recommend The Pey Layer To Print Pla/ Tpu/ Petg (Temp Suggestion: 50°C-70°C, ≤90°C). The Textured Pei Plate Print Pla/ Pla-Cf/ Petg/ Pc/ Abs/ Tpu/ Nylon Etc. Printing Model Is Easy To Adhere On Pei Bed, Has A Great Adhesion, And Easy To Be Removed , Just Flex Slightly To Pop Your Prints Right Off. In Some Cases, Remove The Model Directly Without Taking The Printing Bed From Prusa Mk3 3D Printer..
【More Support】All Products Are Inspected Before Shipment. If You Have Any Questions About Product Quality Or Suggestions, Please Feel Free To Contact Us Via Your Order Id. We Are Very Grateful For Your Love And Care For The Product. 3D Printer Print Bed Is Our Main Product, This Kind Of Multicolor Pei - Pey Steel Plate Is Not Only Available In 254X241mm But Also In 196X190mm - Prusa Mini/ 235X235mm - Ender 3 V2, Ender 5, Neptune3, Neptune4/ 257X257mm - Bambulab X1c P1p P1s..
【Proven Solution】Made Of High Quality Spring Steel Plate. Flexible, Removable, High Strength And Heat Resistance, Dual-Side Design, Thicker And More Durable. Easy To Use, Put The Printing Plate Onto The Lab Printer Hot Bed, Then The Print Bed Levelling Will Automatically Go On While Machine Powered On. (Note:The Smooth Surface Has A Factory Protective Film That Needs To Be Removed.).
【A New Shiny Prusa Bed Plate】The Smooth Pey Side Is The Latest Printing Surface In Prusa I3 Mk3 Parts, Size 254X241mm/10X9.5Inch. Flaring Stars And Dots Fill The Entire Spring Plate, Which Makes Itself Beautiful As A Picture. Another Magical Thing, It Presents Different Patterns Under Different Intensities Of Light And Angles. This Is Its Distinctive Feature From Other 3D Printer Bed Mats, Such As Peo Plate, Pei Sheet Or Pet Plate Sheet Etc..
Brand: FYSETC | Manufacturer: fuyuansheng
Dimensions: 0.03 x 10.00 x 9.49 inches
See On Amazon #21
IdeaFormer-3D H1H Build Plate for Bambu Lab X1C/X1/X1E/P1P/P1S/A1 Print Bed Light Beam+Phantom Spring Steel Sheet Plate 257x257mm Double Sided Flexible Sheet for Bambu Labs Series 3D Printers
Asin: B0CPP6C8F8 | Model: PEO-PET-257 | PartNumber: PEO-PET-257
Features
- Upgraded H1H Build Plate The H1H spring steel sheet is double sided print plate. One side is a Light beam pattern, which can leave a vibrant Rainbow Streak on the bottom of your printed model. The other side is a phantom pattern, It allows you to experience a kaleidoscope of vibrant and colorful visuals that bring your creations to life. Our H1H build plate can add a touch of magic to your creations, blending reality and dreams seamlessly.
- Excellent Adhesion The H1H spring steel flexible build plate has a good adhesive, even better than smooth PEI PET or PEO. It even can stick well without heating the platform, no glue is needed. If your printer is X1 series, please turn off Enable detection of build plate position, otherwise it will casued bad adhesion.
- Easy to Maintain The Light beam or phantom pattern of the printed model may fade or disappear if wiped with hands or other oily objects, but don't worry, you only need to wipe the H1H surface with a wet tissue and then wipe dry it with a dry tissue to keep it clean, It will become as clean as the first time you got it, the Light beam or phantom pattern can be reappeared!
- Compatible Filaments The H1H print bed surface is resistant to high temperatures of 200 C.After our extensive testing, we recommend the H1H build plate to print PLA /PETG /TPU /ABS, If you want to print other filaments, please adjust the parameters.
- Package Included 1 x Spring steel plate (H1H Build Plate Light Beam+Phantom Double Sided Printing). Our double-sided H1H build plate fits 3D printers with a platform size of 257x257mm, compatible for Bambu Lab X1C/X1/X1E/P1P/P1S/A1.
- See more on Amazon...
【Easy To Maintain】The Light Beam Or Phantom Pattern Of The Printed Model May Fade Or Disappear If Wiped With Hands Or Other Oily Objects, But Don't Worry, You Only Need To Wipe The H1h Surface With A Wet Tissue And Then Wipe Dry It With A Dry Tissue To Keep It Clean, It Will Become As Clean As The First Time You Got It, The Light Beam Or Phantom Pattern Can Be Reappeared!.
【Package Included】1 X Spring Steel Plate (H1h Build Plate Light Beam+Phantom Double Sided Printing). Our Double-Sided H1h Build Plate Fits 3D Printers With A Platform Size Of 257X257mm, Compatible For Bambu Lab X1c/X1/X1e/P1p/P1s/A1..
【Compatible Filaments】The H1h Print Bed Surface Is Resistant To High Temperatures Of 200°C.After Our Extensive Testing, We Recommend The H1h Build Plate To Print Pla /Petg /Tpu /Abs, If You Want To Print Other Filaments, Please Adjust The Parameters..
【Excellent Adhesion 】The H1h Spring Steel Flexible Build Plate Has A Good Adhesive, Even Better Than Smooth Pei Pet Or Peo. It Even Can Stick Well Without Heating The Platform, No Glue Is Needed. If Your Printer Is X1 Series, Please Turn Off "Enable Detection Of Build Plate Position", Otherwise It Will Casued Bad Adhesion..
Brand: IdeaFormer-3D | Manufacturer: Bell Tech
See On Amazon #22
Imdinnogo 3D Printer Platform for Prussa Original I3 MK3 MK3S MK3S+ MK4 253.8x241mm: Powder-Texture PEI PET Build Plate Fit for 3D Printing Project Spring Steel Sheet Removable and Flexible Bczamd
Asin: B0C9MGCG19
Features
- 1. Compatible many filament: PLA(50-65 ), PETG(70-80 ), ABS(90-100 ), TPU(60-70 ), TPE, HIPS, PA-CF, WOOD. We have not tested every material, if you have a try to finish your 3d printing project, please share with us. (NOTE: ABS is not suitable the PET side ).
- 2. Higher Quality: Adopt high elasticity and folding resistance stainless steel plate, Higher adhesion force but easy prints pickup(After printing and cooling, remove the steel plate and gently bend it, and the model can be detached.).
- 3. Higher temperature resistance: Powder coating PEI (maximum temperature 190 ), Textured PET (maximum temperature 100 ).
- 4. Convenient to use: You only need to adjust the z-axis to your printer and then you don't need to do anything else to level it, even after many prints.
- 5. MK52 build plate is our newest product that has been tested many times. If you need a build platform for other printer sizes, such as ender 3 ender 5 voron2.4, etc, please feel free to contact us.
- See more on Amazon...
3. Higher Temperature Resistance: Powder Coating Pei (Maximum Temperature 190¡Æ), Textured Pet (Maximum Temperature 100¡Æ)..
5. Mk52 Build Plate Is Our Newest Product That Has Been Tested Many Times. If You Need A Build Platform For Other Printer Sizes, Such As Ender 3 Ender 5 Voron2.4, Etc, Please Feel Free To Contact Us..
4. Convenient To Use: You Only Need To Adjust The Z-Axis To Your Printer And Then You Don't Need To Do Anything Else To Level It, Even After Many Prints..
2. Higher Quality: Adopt High Elasticity And Folding Resistance Stainless Steel Plate, Higher Adhesion Force But Easy Prints Pickup(After Printing And Cooling, Remove The Steel Plate And Gently Bend It, And The Model Can Be Detached.)..
Brand: Imdinnogo | Manufacturer: Aimengda
See On Amazon #23
Shion.Kwoo Upgraded Smooth/Textured Ender 3 S1 PEO+ PEI Sheet Spring Steel Build Plate NO-Base 235x235mm Double Sided Bed for Creality K1/Ender 5 S1/Ender 3 Pro/Ender 3 V2/Voxelab Aquila 3D Printers.
Asin: B0CRDZHK6P
Features
- Product Features : For the PEO+PEI build plate, the PEO side presents a diamond pattern, showcasing the intersection of gloss and matte surfaces to create a diamond texture, elevating the print surface with sophistication. Capable of supporting temperatures up to 150 C, it's ideal for users working with low-temp filaments like PLA and PETG. Our in-house developed PEI coating exhibits a delicate matte texture, exuding a calm and stable demeanor, with an impressive high-temp filaments.
- Premium Materials : In addition to sourcing thickened PEO film and our proprietary high-viscosity PEI formula, our choice of a 0.4mm thick stainless steel plate ensures resistance to deformation and rust, maintaining high flatness and ample resilience. With excellent adhesion, it's incredibly user-friendly for new users. We've repeatedly tested and validated the results.
- Usage Guidelines : Pay attention to the nozzle-to-surface distance to prevent scratches that could leave permanent marks. Regularly clean the surface with alcohol or a cleaning agent, as dirt and oil can reduce print adhesion and affect the clarity of the diamond pattern on the PEO surface. In extreme conditions, such as humid filaments, complex models, our practical experience suggests lowering print speed, increasing bed temperature, and optimizing filament and chamber temperature.
- Compatibility : Size 235x235mm, Compatible with Creality Ender 5 S1/Creality K1/Ender 3 S1/Ender 3/Ender 3 Pro/Ender 3 V2/CP-01/Cr-20/Cr 20 Pro/Voxelab Aquila 3D Printers.. If you're uncertain, feel free to contact us directly for assistance. As both manufacturers and printing enthusiasts, we use our own products for printing and creative work. We believe that a scientific approach enhances both print quality and the joy of the process; however, it's not magic or mythology.
- Our Promise : We guarantee the quality and performance of our double-sided textured PEO+PEI printing plate. Your queries and suggestions are our priority, and we promise a prompt response within 24 hours. Thank you for choosing our product. Our team is ready to assist you with personalized services tailored to your unique requirements through the platform's messaging system.
- See more on Amazon...
【Usage Guidelines】: Pay Attention To The Nozzle-To-Surface Distance To Prevent Scratches That Could Leave Permanent Marks. Regularly Clean The Surface With Alcohol Or A Cleaning Agent, As Dirt And Oil Can Reduce Print Adhesion And Affect The Clarity Of The Diamond Pattern On The Peo Surface. In Extreme Conditions, Such As Humid Filaments, Complex Models, Our Practical Experience Suggests Lowering Print Speed, Increasing Bed Temperature, And Optimizing Filament And Chamber Temperature..
【Our Promise】: We Guarantee The Quality And Performance Of Our Double-Sided Textured Peo+Pei Printing Plate. Your Queries And Suggestions Are Our Priority, And We Promise A Prompt Response Within 24 Hours. Thank You For Choosing Our Product. Our Team Is Ready To Assist You With Personalized Services Tailored To Your Unique Requirements Through The Platform's Messaging System..
【Compatibility】: Size：235X235mm, Compatible With Creality Ender 5 S1/Creality K1/Ender 3 S1/Ender 3/Ender 3 Pro/Ender 3 V2/Cp-01/Cr-20/Cr 20 Pro/Voxelab Aquila 3D Printers.. If You're Uncertain, Feel Free To Contact Us Directly For Assistance. As Both Manufacturers And Printing Enthusiasts, We Use Our Own Products For Printing And Creative Work. We Believe That A Scientific Approach Enhances Both Print Quality And The Joy Of The Process; However, It's Not Magic Or Mythology..
【Premium Materials】: In Addition To Sourcing Thickened Peo Film And Our Proprietary High-Viscosity Pei Formula, Our Choice Of A 0.4Mm Thick Stainless Steel Plate Ensures Resistance To Deformation And Rust, Maintaining High Flatness And Ample Resilience. With Excellent Adhesion, It's Incredibly User-Friendly For New Users. We've Repeatedly Tested And Validated The Results..
Brand: Shion.Kwoo | Manufacturer: Shionkwoo
See On Amazon #24
Sovol 2 Pack Resin 3D Printer Flex Building Plate, Spring Steel Flexible Plate and Magnetic Base Platform for Saturn 2 8K/ Saturn 3/ Saturn 3 Ultra/Saturn 8K 224x129mm
Asin: B0C99BZ5XW
Features
- Spring steel plate with high chromium content, easy to bend and clean. Much easier to remove prints and avoid damages during the process, especially for small prints. Good corrossion resistance and prevent rust. Brushed surface provides better adhesion, ensure a perfect print.
- Please adjust the z limit switch after installation. It should be a little higher. You can print a spacer to compensate the difference. If you do not receive instrucstions coming with the product, please refer to the last 2 pictures we listed on the product webpage which contains instructions in details. Any other questions or issues about the product please feel free to contact us.
- The magnetic base offers powerful magnetics, ensure perfect fit with steel plate. The two easy lift tabs(handles) make it easier to remove the steel plate from the magnetic base.
- !!! Please clean up your build plate with alcohol to make sure there is no any resin or dust left on the surface. The build plate must be clean and dry. And you need to stick and compact the magnetic base on build plate to make sure no any bubbles. Otherwise the magnetic base would peel off. Please wait for 72 hours after installation and before printing. Tips: You can use hair dryer blow the magnetic base evenly with hot wind for 5-10 mins after installation to increase the adhesion.
- The spare steel plate can achieve continuous printing, restart printing before you start cleaning the first, save your time.
- See more on Amazon...
The Magnetic Base Offers Powerful Magnetics, Ensure Perfect Fit With Steel Plate. The Two Easy Lift Tabs(Handles) Make It Easier To Remove The Steel Plate From The Magnetic Base..
The Spare Steel Plate Can Achieve Continuous Printing, Restart Printing Before You Start Cleaning The First, Save Your Time..
!!! Please Clean Up Your Build Plate With Alcohol To Make Sure There Is No Any Resin Or Dust Left On The Surface. The Build Plate Must Be Clean And Dry. And You Need To Stick And Compact The Magnetic Base On Build Plate To Make Sure No Any Bubbles. Otherwise The Magnetic Base Would Peel Off. Please Wait For 72 Hours After Installation And Before Printing. Tips: You Can Use Hair Dryer Blow The Magnetic Base Evenly With Hot Wind For 5-10 Mins After Installation To Increase The Adhesion..
‼Please Adjust The Z Limit Switch After Installation. It Should Be A Little Higher. You Can Print A Spacer To Compensate The Difference. If You Do Not Receive Instrucstions Coming With The Product, Please Refer To The Last 2 Pictures We Listed On The Product Webpage Which Contains Instructions In Details. Any Other Questions Or Issues About The Product Please Feel Free To Contact Us..
Brand: Sovol | Manufacturer: Sovol 3D
See On Amazon #25
Creality Ender 3 Glass Bed Upgraded Build Surface Plate, 235x235x4mm
Asin: B07RD6D2ZQ | Model: Dawnblade190503 | PartNumber: Dawnblade190503 | Ean: 0745679683719 | UPC: 745679683719
Features
- No Edge Curling - 3D printer coated glass bed, molds could stick on bed firmly without glue, avoiding the issue of print edges curling. A necessary 3d printer upgrade parts.
- No-indentation Printing - Upgraded Ender 3 glass plate has a much smaller CREALITY logo than older version, avoiding leaving logo indentations on molds surface during 3D printing.
- Excellent Flatness - Improved 3D printer glass plate provides more flat and more smooth build surface than magnetic mat or pei sticker, ensuring high flatness for the bottom of model.
- Super Convenient - Very easy to take off the model, no tools needed. This borosilicate glass bed could be fixed with middle sized clips and cleaned with alcohol or acetone at room temperature.
- Compatibility - The 3D printer parts is applicable with Creality 3D printer Ender-3, Ender-3 Pro, Ender-3S, Ender-3X, Ender-3 V2, Ender-5, Ender-5 Pro and CR-20, CR-20 Pro, pls confirm if this borosilicate glass bed compatible with your printer.
- See more on Amazon...
Excellent Flatness - Improved 3D Printer Glass Plate Provides More Flat And More Smooth Build Surface Than Magnetic Mat Or Pei Sticker, Ensuring High Flatness For The Bottom Of Model..
Compatibility - The 3D Printer Parts Is Applicable With Creality 3D Printer Ender-3, Ender-3 Pro, Ender-3S, Ender-3X, Ender-3 V2, Ender-5, Ender-5 Pro And Cr-20, Cr-20 Pro, Pls Confirm If This Borosilicate Glass Bed Compatible With Your Printer..
Super Convenient - Very Easy To Take Off The Model, No Tools Needed. This Borosilicate Glass Bed Could Be Fixed With Middle Sized Clips And Cleaned With Alcohol Or Acetone At Room Temperature..
No-Indentation Printing - Upgraded Ender 3 Glass Plate Has A Much Smaller Creality Logo Than Older Version, Avoiding Leaving Logo Indentations On Molds Surface During 3D Printing..
Brand: Dawnblade | Manufacturer: Dawnblade
Dimensions: 0.16 x 9.25 x 9.25 inches
See On Amazon #26
YOOPAI Double-Sided PEI+PEO Sheet and Flexible Magnetic Build Plate, 235 * 235mm 3D Printer Bed Platform for Creality K1/K1C/Ender 3/Ender 5 S1/Ender 3 Pro/Ender 3 V3/Ender 3 S1 Pro/Ender 3 Neo
Asin: B0CNP6KJX9 | Model: PEI+PEO-235-BK | PartNumber: PEI+PEO-235-BK | Ean: 0850055848245 | UPC: 850055848245
Features
- Excellent Adhesion: Each YOOPAI PEI+PEO sheet is equipped with two sides - one diamond textured PEO coating and one smooth PEI coating. You can easily print directly on either side without the need for glue or additional tools to ensure your model sticks firmly to the sheet. Both sides offer strong adhesion to a wide range of filaments, allowing you to choose the appropriate side based on your printing requirements.
- Reliable and Cost-effective: This 3D printer bed is built to withstand the demanding conditions of continuous printing operations. The PEO surface is perfect for printing PLA filaments, while the PEI surface accommodates most filaments including PLA, ABS, PETG, TPU, and Nylon. By investing in this dual-sided bed, you not only gain two different printing effects but also double the usage time, making it a cost-effective choice.
- Simple Set-up: The build plate consists of two parts - a flexible steel platform and a magnetic bottom sheet with adhesive backing. Simply attach the magnetic base plate to the printer's hotbed and affix the PEI+PEO sheet to the bottom for instant printing without any complex setup procedures.
- Effortless Removal: This 3D printer bed can endure the repeated heating cycles that occur during 3D printing. Its flexible surface allows for easy removal of prints once the heated bed cools down to room temperature. If a print still sticks, just detach the upper magnetic surface, flex the flexible surface, and watch the model easily detach and land in your hands.
- Wide Application: With a size of 235*235mm (9.25*9.25inch), this build plate is compatible with Creality 3D printers such as Ender-3, Ender-3 Pro, Ender-3 V2, Ender-3 S1, Ender 3 S1 Pro, Ender 3 Neo, Ender 3 V2 Neo, Ender-5, Ender-5 Pro, CR-20, CR-20 Pro, Voxelab Aquila, Voxelab Aquila C1, Voxelab Aquila C2, and other similarly-sized FDM 3D printers. After installation, please ensure to re-level the print bed to enhance the printing quality.
- See more on Amazon...
Simple Set-Up: The Build Plate Consists Of Two Parts - A Flexible Steel Platform And A Magnetic Bottom Sheet With Adhesive Backing. Simply Attach The Magnetic Base Plate To The Printer's Hotbed And Affix The Pei+Peo Sheet To The Bottom For Instant Printing Without Any Complex Setup Procedures..
Wide Application: With A Size Of 235*235Mm (9.25*9.25Inch), This Build Plate Is Compatible With Creality 3D Printers Such As Ender-3, Ender-3 Pro, Ender-3 V2, Ender-3 S1, Ender 3 S1 Pro, Ender 3 Neo, Ender 3 V2 Neo, Ender-5, Ender-5 Pro, Cr-20, Cr-20 Pro, Voxelab Aquila, Voxelab Aquila C1, Voxelab Aquila C2, And Other Similarly-Sized Fdm 3D Printers. After Installation, Please Ensure To Re-Level The Print Bed To Enhance The Printing Quality..
Effortless Removal: This 3D Printer Bed Can Endure The Repeated Heating Cycles That Occur During 3D Printing. Its Flexible Surface Allows For Easy Removal Of Prints Once The Heated Bed Cools Down To Room Temperature. If A Print Still Sticks, Just Detach The Upper Magnetic Surface, Flex The Flexible Surface, And Watch The Model Easily Detach And Land In Your Hands..
Reliable And Cost-Effective: This 3D Printer Bed Is Built To Withstand The Demanding Conditions Of Continuous Printing Operations. The Peo Surface Is Perfect For Printing Pla Filaments, While The Pei Surface Accommodates Most Filaments Including Pla, Abs, Petg, Tpu, And Nylon. By Investing In This Dual-Sided Bed, You Not Only Gain Two Different Printing Effects But Also Double The Usage Time, Making It A Cost-Effective Choice..
First Available: 02/02/2024
Brand: YOOPAI | Manufacturer: YOOPAI
Dimensions: 0.10 x 9.25 x 9.25 Inches
Warranty: 180 Days Garantie
See On Amazon #27
HysiPrui Flexible Spring Steel Magnetic Build Plate for Resin 3D Printer - SLA 3D Printer Parts/Accessories Replacement Build Platform Bed Compatible with Anycubic Photon Mono 2, 160x95mm
Asin: B0CLNSVRZC
Features
- Compatible With One 3D Printer Model : This spring steel build plate bed measures 160x95mm and is designed to be only compatible with Anycubic Photon Mono 2 SLA resin 3d printers. Please confirm your 3D printer model and platform size before ordering.
- Flexible Spring Steel Build Plate : The build platform is made of spring steel, strong and durable, not easy to deform, good flatness and durability, providing a stable and reliable platform for your 3D printing needs. Easy to bend and clean, good corrosion resistance to prevent rust. The surface of the spring steel is specially brushed for stronger adsorption, which better adsorbs the model and ensures perfect printing.
- Build Platform Note : The thickness of this build plate is 2.7mm, the print height will be reduced by 2.7mm. you can print a 2.7mm spacer to compensate for the difference to prevent the Z-axis from going back to zero. Meanwhile, after installing the magnetic print platform bed, you need to re-level the 3D printer to get excellent printing results.
- Easy To Take Mold : The magnetic printing platform is made of high quality stainless steel material with good flexibility. After bending and dismantling the model, it can be quickly restored to its original shape and reused. If the print model is still stuck to the build plate, gently bend the plate to remove it. There is no need to scratch, pry or damage the print! The prints are easily removed without causing any scratches or damage.
- Simple Installation : Please clean the build plate with alcohol and make sure the surface is free of any resin or dust. The build plate must be clean and dry. You also need to paste and compact the magnetic base on the build plate to make sure there are no air bubbles, otherwise the magnetic base will fall off. Please wait 48 hours after installation before printing. Tip: Use a hair dryer to blow the magnetic base evenly with hot air for 5-10 minutes after installation to increase adhesion.
- See more on Amazon...
【Build Platform Note】: The Thickness Of This Build Plate Is 2.7Mm, The Print Height Will Be Reduced By 2.7Mm. You Can Print A 2.7Mm Spacer To Compensate For The Difference To Prevent The Z-Axis From Going Back To Zero. Meanwhile, After Installing The Magnetic Print Platform Bed, You Need To Re-Level The 3D Printer To Get Excellent Printing Results..
【Simple Installation】: Please Clean The Build Plate With Alcohol And Make Sure The Surface Is Free Of Any Resin Or Dust. The Build Plate Must Be Clean And Dry. You Also Need To Paste And Compact The Magnetic Base On The Build Plate To Make Sure There Are No Air Bubbles, Otherwise The Magnetic Base Will Fall Off. Please Wait 48 Hours After Installation Before Printing. Tip: Use A Hair Dryer To Blow The Magnetic Base Evenly With Hot Air For 5-10 Minutes After Installation To Increase Adhesion..
【Easy To Take Mold】: The Magnetic Printing Platform Is Made Of High Quality Stainless Steel Material With Good Flexibility. After Bending And Dismantling The Model, It Can Be Quickly Restored To Its Original Shape And Reused. If The Print Model Is Still Stuck To The Build Plate, Gently Bend The Plate To Remove It. There Is No Need To Scratch, Pry Or Damage The Print! The Prints Are Easily Removed Without Causing Any Scratches Or Damage..
【Flexible Spring Steel Build Plate】: The Build Platform Is Made Of Spring Steel, Strong And Durable, Not Easy To Deform, Good Flatness And Durability, Providing A Stable And Reliable Platform For Your 3D Printing Needs. Easy To Bend And Clean, Good Corrosion Resistance To Prevent Rust. The Surface Of The Spring Steel Is Specially Brushed For Stronger Adsorption, Which Better Adsorbs The Model And Ensures Perfect Printing..
Brand: HysiPrui | Manufacturer: HysiPrui
See On Amazon #28
FYSETC Upgrade Prusa Mini 3D Printer Platform PEY Build Plate 196.3X190mm: Smooth PEY - Textured PEI Sheet Flex Dual Sides Spring Steel Plate Removable Heated Bed Cover for PETG Filament 1.75 PLA
Asin: B0CK2J6BK5
Features
- Upgrade Prusa mini+ Part A new Double Sided heated bed sheet: Smooth PEY+Textured PEI. One side is a textured PEI bed which presents the frosted surface with a distinctive frosted touch. Another side is coated with a smooth PEY sheet which has a Starry & Fine Sequins pattern that shines brightly. The most important thing, the Stars and Dots pattern will be left on the printing model, which brings endless fun to your 3d printing. How Beautiful and Magical!
- A New Shiny Print Bed Size 196.3x190mm/7.7x7.4inch. Smooth PEY sheet is the latest printing surface. Flaring stars and dots fill the entire spring steel, which makes itself beautiful as a picture. Another magical thing, it presents different patterns under different intensities of light and angles. This is its distinctive feature from other 3d printer bed mats, such as peo plate or PET plate sheet, glass bed etc. Colorful pattern won't disappear with lots of printing times!
- Wide 3D Printing Material Compatibility Support various 3d printer filaments. After testing, we recommend the PEY layer to print PLA/ TPU/ PETG (Temp Suggestion: 50 C-70 C, 90 C). The textured PEI plate print PLA/ PLA-CF/ PETG/ PC/ ABS/ TPU/ Nylon etc. Printing model is easy to adhere on PEI bed, has a great adhesion, and easy to be removed , just flex slightly to pop your prints right off. In some cases, remove the model directly without taking the spring plate from printing bed.
- Proven Solution Made of high quality spring steel plate. Flexible, removable, high strength and heat resistance, dual-side design, thicker and more durable. Easy to use, put the printing plate onto the lab printer hot bed, then the print bed levelling will automatically go on while machine powered on. (Note:The smooth surface has a factory protective film that needs to be removed.)
- More Support All products are inspected before shipment. If you have any questions about product quality or suggestions, please feel free to contact us via your order ID. We are very grateful for your love and care for the product. We have different sizes for this kind of multicolor PEI - PEY steel plate, not only available in 254x241mm - Prusa i3 MK3S, but also in 235x235mm - Ender 3 V2, Ender 5, Neptune3, Neptune4/ 257x257mm - Bambulab X1C P1P P1S / 180x180mm - KP3S
- See more on Amazon...
【Wide 3D Printing Material Compatibility】Support Various 3D Printer Filaments. After Testing, We Recommend The Pey Layer To Print Pla/ Tpu/ Petg (Temp Suggestion: 50°C-70°C, ≤90°C). The Textured Pei Plate Print Pla/ Pla-Cf/ Petg/ Pc/ Abs/ Tpu/ Nylon Etc. Printing Model Is Easy To Adhere On Pei Bed, Has A Great Adhesion, And Easy To Be Removed , Just Flex Slightly To Pop Your Prints Right Off. In Some Cases, Remove The Model Directly Without Taking The Spring Plate From Printing Bed..
【More Support】All Products Are Inspected Before Shipment. If You Have Any Questions About Product Quality Or Suggestions, Please Feel Free To Contact Us Via Your Order Id. We Are Very Grateful For Your Love And Care For The Product. We Have Different Sizes For This Kind Of Multicolor Pei - Pey Steel Plate, Not Only Available In 254X241mm - Prusa I3 Mk3s, But Also In 235X235mm - Ender 3 V2, Ender 5, Neptune3, Neptune4/ 257X257mm - Bambulab X1c P1p P1s / 180X180mm - Kp3s.
【Proven Solution】Made Of High Quality Spring Steel Plate. Flexible, Removable, High Strength And Heat Resistance, Dual-Side Design, Thicker And More Durable. Easy To Use, Put The Printing Plate Onto The Lab Printer Hot Bed, Then The Print Bed Levelling Will Automatically Go On While Machine Powered On. (Note:The Smooth Surface Has A Factory Protective Film That Needs To Be Removed.).
【A New Shiny Print Bed 】Size 196.3X190mm/7.7X7.4Inch. Smooth Pey Sheet Is The Latest Printing Surface. Flaring Stars And Dots Fill The Entire Spring Steel, Which Makes Itself Beautiful As A Picture. Another Magical Thing, It Presents Different Patterns Under Different Intensities Of Light And Angles. This Is Its Distinctive Feature From Other 3D Printer Bed Mats, Such As Peo Plate Or Pet Plate Sheet, Glass Bed Etc. Colorful Pattern Won't Disappear With Lots Of Printing Times!.
Brand: FYSETC | Manufacturer: fuyuansheng
Dimensions: 0.03 x 7.73 x 7.48 inches | Weight: 0.40 pounds
See On Amazon #29
YOOPAI Double-Sided PEI Sheet and Flexible Magnetic Build Plate Kit, 235x235mm 3D Printer Bed Platform for Creality K1/Ender 5 S1/Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 S1 Pro/Ender 3 Neo, Black
Asin: B0C4SMLYCK | Model: DB-PEI-Black | PartNumber: DB-PEI-Black | Ean: 0850055848542 | UPC: 850055848542
Features
- Excellent Adhesion: Each Yoopai PEI sheet has two sides, both are textured. You can print directly on each side of the PEI sheet without using any glue or other tools to help the model to stick onto the sheet. Both sides have strong adhesion to various filaments, just choose either side for printing according to your needs.
- Reliable and Cost-effective: This 3D printer bed can handle the tough conditions of 24/7 printing with the ultra-high temperature of up to 120 C, making it perfect for materials like PLA, PETG, ABS, TPU, ASA, Nylon, and PC. Both sides of the PEI sheet can be printed, pay once and get twice the usage time.
- Simple Set-up: Our PEI Sheet has two parts, a flexible steel platform and a magnetic bottom sheet with adhesive on the back. Simply attach the magnetic base plate to the printer's hot bed and adsorb the PEI bottom to start printing immediately.
- Great Removal: Withstand the numerous heat cycles that a 3D print bed goes through from print to print. The surface is flexible and easily removed. When the temperature of the heated bed reaches room temperature, prints come off the surface easily. If the print is still stuck, just remove the upper magnetic surface from the lower one, bend the flexible surface and watch the model fall right into your hands.
- Wide Application: The size of Ender 3 PEI is 235*235mm 9.25*9.25inch). After installing the print bed, please re-level it to improve the printing effect. It is applicable with Creality 3D printers such as Ender-3, Ender-3 Pro, Ender-3 V2, Ender-3 S1, Ender 3 S1 pro,Ender 3 neo, Ender 3 v2 neo, Ender-5, Ender-5 Pro, CR-20, CR-20 Pro, Voxelab Aquila, Voxelab Aquila C1, Voxelab Aquila C2 and and similarly sized FDM 3d printers.
- See more on Amazon...
Simple Set-Up: Our Pei Sheet Has Two Parts, A Flexible Steel Platform And A Magnetic Bottom Sheet With Adhesive On The Back. Simply Attach The Magnetic Base Plate To The Printer's Hot Bed And Adsorb The Pei Bottom To Start Printing Immediately..
Wide Application: The Size Of Ender 3 Pei Is 235*235Mm（9.25*9.25Inch). After Installing The Print Bed, Please Re-Level It To Improve The Printing Effect. It Is Applicable With Creality 3D Printers Such As Ender-3, Ender-3 Pro, Ender-3 V2, Ender-3 S1, Ender 3 S1 Pro,Ender 3 Neo, Ender 3 V2 Neo, Ender-5, Ender-5 Pro, Cr-20, Cr-20 Pro, Voxelab Aquila, Voxelab Aquila C1, Voxelab Aquila C2 And And Similarly Sized Fdm 3D Printers..
Great Removal: Withstand The Numerous Heat Cycles That A 3D Print Bed Goes Through From Print To Print. The Surface Is Flexible And Easily Removed. When The Temperature Of The Heated Bed Reaches Room Temperature, Prints Come Off The Surface Easily. If The Print Is Still Stuck, Just Remove The Upper Magnetic Surface From The Lower One, Bend The Flexible Surface And Watch The Model Fall Right Into Your Hands..
Reliable And Cost-Effective: This 3D Printer Bed Can Handle The Tough Conditions Of 24/7 Printing With The Ultra-High Temperature Of Up To 120°C, Making It Perfect For Materials Like Pla, Petg, Abs, Tpu, Asa, Nylon, And Pc. Both Sides Of The Pei Sheet Can Be Printed, Pay Once And Get Twice The Usage Time..
First Available: 05/10/2023
Brand: YOOPAI | Manufacturer: YOOPAI
Dimensions: 9.25 x 0.20 x 9.25 Inches
Warranty: 1 year garantie
See On Amazon #30
Anycubic Spring Steel Magnetic Platform 3D Printer Accessory, Durable and Tough Compatible with Anycubic Kobra Max 3D FDM 3D Printer
Asin: B0B87S534J
Features
- Application Compatible with Anycubic Kobra Max 3D printer
- Easy to Remove Magnetic platform could achieve remove the model more easily. Improve the printing success and reduce the filament waste
- Exquisite Workmanship It is tough durable and reliable accessory
- Great Performance Offers superior printing results and experience
- Excellent After-Sale Service Excellent after-sale service for any questions or concerns. If you have any qusetions, please contact us at amazonsupport@anycubic.com
- See more on Amazon...
【Exquisite Workmanship】It Is Tough、Durable And Reliable Accessory.
【Excellent After-Sale Service 】Excellent After-Sale Service For Any Questions Or Concerns. If You Have Any Qusetions, Please Contact Us At Amazonsupport@Anycubic.Com.
【Great Performance】Offers Superior Printing Results And Experience.
【Easy To Remove】Magnetic Platform Could Achieve Remove The Model More Easily. Improve The Printing Success And Reduce The Filament Waste.
Brand: ANYCUBIC | Manufacturer: ANYCUBIC
Dimensions: 1.50 x 17.00 x 11.00 inches
See On Amazon
Looking For Something Else?
Search