Best Lift Magnets - Buying Guide
Last Updated: 05/02/2024
Share on
Bestselling Lift Magnets on Amazon
- VEVOR Magnetic Lifter, 1320 lbs/600kg Pulling Capacity, 2.5 Safety Factor, Neodymium & Steel, Liftin...
- VEVOR Lifting Magnet with Release, 4400 LBS Pulling Force Steel Magnetic Lifter, Heavy Duty Neodym...
- VEVOR Magnetic Lifter, 660 lbs/300 kg Pulling Capacity, 2.5 Safety Factor, Neodymium & Steel, Liftin...
- VEVOR Permanent Magnetic Lifting with Release, 880 lbs/400kg Heavy Duty Magnet, 2.5 Safety Factor, N...
- MAG-MATE PNL1600 Powerlift Magnet, Heavy Duty Magnet, with 3 to 1 Lift Saftey, Rare Earth Magnet wit...
- Magnetpro Multipurpose Switch Magnet, 660 LB Pull-Off Force Switchable Magnetic System, On/Off Magne...
- MAG-MATE PNL0800 Powerlift Magnet, Heavy Duty Magnet, with 3 to 1 Lift Saftey Rating, Rare Earth Mag...
- Permanent Magnetic Lifter, 2200lbs Pulling Capacity Steel Lifting Magnet, 1000KG Heavy Duty Metal Li...
- AOMAG 120 lb Magnetic Sheet Handler Lifting Magnet with Release Holder, 720 lbs Breakaway Force, Saf...
- AOMAG Strong Lifting Magnet with Release 255Lbs, Powerful Magnet with Ergonomic Handle, PH-255
#1
VEVOR Magnetic Lifter, 1320 lbs/600kg Pulling Capacity, 2.5 Safety Factor, Neodymium & Steel, Lifting Magnet with Release, Permanent Lift Magnets, Heavy Duty Magnet for Hoist, Shop Crane, Block, Board
Asin: B0C379X6SM | Model: PML-600 | PartNumber: PML-600 | Ean: 0840349901671 | UPC: 840349901671
Features
- 1320 lbs Lifting Capacity: Built with N42 neodymium magnets, this permanent magnetic lifter can lift 1320 lbs/600 kg loads. With an upgraded 2.5 safety factor, it is solid and reliable enough to lift steel sheets, blocks, rods, cylindrical, and other magnetic materials.
- Security Handle Design: The magnet for hoist is designed with a chrome-plated anti-collision handle. Press the safety switch to rotate the handle, avoiding the risk of accidental startup and ensuring security. The handle is rubber-wrapped for slip resistance and a comfortable grip.
- Heavy-Duty Chrome-Plated Hook: The hook of our hoist magnet is made from high-strength steel with a chrome finish. You don't have to worry about it breaking or deforming when lifting. Its chrome-plated surface is smoother, more rust-proof, and easier to clean.
- Operate Without Sweat: Our permanent magnet crane features a flexible rotating shaft, making it easier to control the switch. Just turn left to turn on the suction and right to turn off the suction. For added security, the limit bolt is designed to fix the handle.
- U-Shaped Groove: The U-shaped bottom groove is compatible with both flat plates and round steels, boosting a wider range of applications. This permanent lift magnet is an excellent sheet metal lifting tool for the electricity, engineering, transportation, and mining industries.
- See more on Amazon...
Heavy-Duty Chrome-Plated Hook: The Hook Of Our Hoist Magnet Is Made From High-Strength Steel With A Chrome Finish. You Don't Have To Worry About It Breaking Or Deforming When Lifting. Its Chrome-Plated Surface Is Smoother, More Rust-Proof, And Easier To Clean..
U-Shaped Groove: The U-Shaped Bottom Groove Is Compatible With Both Flat Plates And Round Steels, Boosting A Wider Range Of Applications. This Permanent Lift Magnet Is An Excellent Sheet Metal Lifting Tool For The Electricity, Engineering, Transportation, And Mining Industries..
Operate Without Sweat: Our Permanent Magnet Crane Features A Flexible Rotating Shaft, Making It Easier To Control The Switch. Just Turn Left To Turn On The Suction And Right To Turn Off The Suction. For Added Security, The Limit Bolt Is Designed To Fix The Handle..
Security Handle Design: The Magnet For Hoist Is Designed With A Chrome-Plated Anti-Collision Handle. Press The Safety Switch To Rotate The Handle, Avoiding The Risk Of Accidental Startup And Ensuring Security. The Handle Is Rubber-Wrapped For Slip Resistance And A Comfortable Grip..
Brand: VEVOR | Manufacturer: VEVOR
Dimensions: 4.65 x 8.27 x 4.65 Inches | Weight: 41.00 pounds
See On Amazon #2
VEVOR Lifting Magnet with Release, 4400 LBS Pulling Force Steel Magnetic Lifter, Heavy Duty Neodymium Permanent Lift Magnets, for Hoist, Shop Crane, Block, Board
Asin: B0B1MHNC83 | Model: 4400lbs Pulling Capacity Lifting Magnet | PartNumber: 4400lbs Pulling Capacity Lifting Magnet | Ean: 0840281552535 | UPC: 840281552535
Features
- Strong 4400 lbs Lifting Capacity: This lifting magnet can lift 4400 lbs loads up. It is secure enough to absorb kinds of steel plate. Item Dimension: 15.3''x6.3''x6.7''. Operating Temperature: < =80 .
- Robust Magnetic Construction: The steel magnetic lifter is made with N42 magnet. Highly efficient painting finish is smooth and bright and not easy to corrode or rust.
- Thoughtful Security Mechanism: Constructed of a rubber-wrapped handle, a high-strength shackle hook, and several fixing bolts, The lifting magnet greatly enhances the security and stability and makes your lifting work more convenient.
- Convenient & Practical: The design of the lever rotating shaft is more convenient to control the magnet lifter. Just turn left to open the suction and right to close the suction. And the security bolt can fix the handle precisely.
- Various Application: An excellent sheet metal lifting tool for electricity, engineering, transportation, and mining world. Compatible for lifting steel sheet, block, rod, cylindrical, and other magnetic material.
- See more on Amazon...
Thoughtful Security Mechanism: Constructed Of A Rubber-Wrapped Handle, A High-Strength Shackle Hook, And Several Fixing Bolts, The Lifting Magnet Greatly Enhances The Security And Stability And Makes Your Lifting Work More Convenient..
Various Application: An Excellent Sheet Metal Lifting Tool For Electricity, Engineering, Transportation, And Mining World. Compatible For Lifting Steel Sheet, Block, Rod, Cylindrical, And Other Magnetic Material..
Convenient & Practical: The Design Of The Lever Rotating Shaft Is More Convenient To Control The Magnet Lifter. Just Turn Left To Open The Suction And Right To Close The Suction. And The Security Bolt Can Fix The Handle Precisely..
Robust Magnetic Construction: The Steel Magnetic Lifter Is Made With N42 Magnet. Highly Efficient Painting Finish Is Smooth And Bright And Not Easy To Corrode Or Rust..
Brand: VEVOR | Manufacturer: VEVOR
Dimensions: 6.70 x 15.30 x 6.30 inches | Weight: 130.00 Pounds
See On Amazon #3
VEVOR Magnetic Lifter, 660 lbs/300 kg Pulling Capacity, 2.5 Safety Factor, Neodymium & Steel, Lifting Magnet with Release, Permanent Lift Magnets, Heavy Duty Magnet for Hoist, Shop Crane, Block, Board
Asin: B0C37DHBZF | Model: PML-300 | PartNumber: PML-300 | Ean: 0840349901718 | UPC: 840349901718
Features
- 660 lbs Lifting Capacity: Built with N42 neodymium magnets, this permanent magnetic lifter can lift 660 lbs/300 kg loads. With an upgraded 2.5 safety factor, it is solid and reliable enough to lift steel sheets, blocks, rods, cylindrical, and other magnetic materials.
- Security Handle Design: The magnet for hoist is designed with a chrome-plated anti-collision handle. Press the safety switch to rotate the handle, avoiding the risk of accidental startup and ensuring security. The handle is rubber-wrapped for slip resistance and a comfortable grip.
- Heavy-Duty Chrome-Plated Hook: The hook of our hoist magnet is made from high-strength steel with a chrome finish. You don't have to worry about it breaking or deforming when lifting. Its chrome-plated surface is smoother, more rust-proof, and easier to clean.
- Operate Without Sweat: Our permanent magnet crane features a flexible rotating shaft, making it easier to control the switch. Just turn left to turn on the suction and right to turn off the suction. For added security, the limit bolt is designed to fix the handle.
- U-Shaped Groove: The U-shaped bottom groove is compatible with both flat plates and round steels, boosting a wider range of applications. This permanent lift magnet is an excellent sheet metal lifting tool for the electricity, engineering, transportation, and mining industries.
- See more on Amazon...
Heavy-Duty Chrome-Plated Hook: The Hook Of Our Hoist Magnet Is Made From High-Strength Steel With A Chrome Finish. You Don't Have To Worry About It Breaking Or Deforming When Lifting. Its Chrome-Plated Surface Is Smoother, More Rust-Proof, And Easier To Clean..
U-Shaped Groove: The U-Shaped Bottom Groove Is Compatible With Both Flat Plates And Round Steels, Boosting A Wider Range Of Applications. This Permanent Lift Magnet Is An Excellent Sheet Metal Lifting Tool For The Electricity, Engineering, Transportation, And Mining Industries..
Operate Without Sweat: Our Permanent Magnet Crane Features A Flexible Rotating Shaft, Making It Easier To Control The Switch. Just Turn Left To Turn On The Suction And Right To Turn Off The Suction. For Added Security, The Limit Bolt Is Designed To Fix The Handle..
Security Handle Design: The Magnet For Hoist Is Designed With A Chrome-Plated Anti-Collision Handle. Press The Safety Switch To Rotate The Handle, Avoiding The Risk Of Accidental Startup And Ensuring Security. The Handle Is Rubber-Wrapped For Slip Resistance And A Comfortable Grip..
Brand: VEVOR | Manufacturer: VEVOR
Dimensions: 3.86 x 6.14 x 3.58 inches | Weight: 20.28 Pounds
See On Amazon #4
VEVOR Permanent Magnetic Lifting with Release, 880 lbs/400kg Heavy Duty Magnet, 2.5 Safety Factor, Neodymium & Steel for Hoist, Shop Crane, Block, Board Lifting Plate Steel
Asin: B0CJQYNKNV | Model: PML-400 | PartNumber: PML-400 | Ean: 0197988462910 | UPC: 197988462910
Features
- 880 lbs Lifting Capacity: Built with N42 neodymium magnets, this permanent magnetic lifter can lift 880 lbs/400 kg loads. With an upgraded 2.5 safety factor, it is solid and reliable enough to lift steel sheets, blocks, rods, cylindrical, and other magnetic materials.
- Security Handle Design: The magnet for hoist is designed with a chrome-plated anti-collision handle. Press the safety switch to rotate the handle, avoiding the risk of accidental startup and ensuring security. The handle is rubber-wrapped for slip resistance and a comfortable grip.
- Heavy-Duty Chrome-Plated Hook: The hook of our hoist magnet is made from high-strength steel with a chrome finish. You don't have to worry about it breaking or deforming when lifting. Its chrome-plated surface is smoother, more rust-proof, and easier to clean.
- Operate Without Sweat: Our permanent magnet crane features a flexible rotating shaft, making it easier to control the switch. Just turn left to turn on the suction and right to turn off the suction. For added security, the limit bolt is designed to fix the handle.
- U-Shaped Groove: The U-shaped bottom groove is compatible with both flat plates and round steels, boosting a wider range of applications. This permanent lift magnet is an excellent sheet metal lifting tool for the electricity, engineering, transportation, and mining industries.
- See more on Amazon...
Heavy-Duty Chrome-Plated Hook: The Hook Of Our Hoist Magnet Is Made From High-Strength Steel With A Chrome Finish. You Don't Have To Worry About It Breaking Or Deforming When Lifting. Its Chrome-Plated Surface Is Smoother, More Rust-Proof, And Easier To Clean..
U-Shaped Groove: The U-Shaped Bottom Groove Is Compatible With Both Flat Plates And Round Steels, Boosting A Wider Range Of Applications. This Permanent Lift Magnet Is An Excellent Sheet Metal Lifting Tool For The Electricity, Engineering, Transportation, And Mining Industries..
Operate Without Sweat: Our Permanent Magnet Crane Features A Flexible Rotating Shaft, Making It Easier To Control The Switch. Just Turn Left To Turn On The Suction And Right To Turn Off The Suction. For Added Security, The Limit Bolt Is Designed To Fix The Handle..
Security Handle Design: The Magnet For Hoist Is Designed With A Chrome-Plated Anti-Collision Handle. Press The Safety Switch To Rotate The Handle, Avoiding The Risk Of Accidental Startup And Ensuring Security. The Handle Is Rubber-Wrapped For Slip Resistance And A Comfortable Grip..
Brand: VEVOR | Manufacturer: VEVOR
Dimensions: 7.50 x 10.60 x 8.30 inches | Weight: 19.00 Pounds
See On Amazon #5
MAG-MATE PNL1600 Powerlift Magnet, Heavy Duty Magnet, with 3 to 1 Lift Saftey, Rare Earth Magnet with 1600 lbs Lifting Capacity, Yellow or Green in Color
Asin: B007H98D0Q | Model: PNL1600 | PartNumber: PNL1600 | Ean: 0682241264405 | UPC: 682241264405
Features
- Lift with Confidence: Unleash the reliable strength of the Powerlift Lift Magnet- the ultimate solution for heavy duty magnet lifting. Now with our permanent magnetic lifts, you can bid farewell to any worries about load drops during power failures
- Versatile Magnet: Designed to effortlessly lift thick, non-flexing steel on both flat and round surfaces, our magnets redefine versatility in lifting tasks. Our strong magnets are available in a range of capacities to meet your specific needs
- Gentle and Effective Lift Safety: The easy internal manual release of our heavy duty magnet ensures a smooth lifting experience without contacting or damaging the load, maintaining its integrity throughout the process
- High-Temperature Resilience: These strong magnets can withstand heat up to 180 F (82 C). They can maintain their strength and performance even in demanding environments, providing consistent lift safety and power
- Lock On & Off with Precision: The innovative handle on our rare earth magnets feature a positive lock-on and lock-off mechanism, preventing accidental disengagement and ensuring a secure hold every time
- See more on Amazon...
Gentle And Effective Lift Safety: The Easy Internal Manual Release Of Our Heavy Duty Magnet Ensures A Smooth Lifting Experience Without Contacting Or Damaging The Load, Maintaining Its Integrity Throughout The Process.
Lock On & Off With Precision: The Innovative Handle On Our Rare Earth Magnets Feature A Positive Lock-On And Lock-Off Mechanism, Preventing Accidental Disengagement And Ensuring A Secure Hold Every Time.
High-Temperature Resilience: These Strong Magnets Can Withstand Heat Up To 180°F (82°C). They Can Maintain Their Strength And Performance Even In Demanding Environments, Providing Consistent Lift Safety And Power.
Versatile Magnet: Designed To Effortlessly Lift Thick, Non-Flexing Steel On Both Flat And Round Surfaces, Our Magnets Redefine Versatility In Lifting Tasks. Our Strong Magnets Are Available In A Range Of Capacities To Meet Your Specific Needs.
Brand: Mag-Mate | Manufacturer: Industrial Magnetics Inc
Dimensions: 8.87 x 10.75 x 4.87 inches | Weight: 51.00 pounds
See On Amazon #6
Magnetpro Multipurpose Switch Magnet, 660 LB Pull-Off Force Switchable Magnetic System, On/Off Magnet for Lifting, Working&Welding Positioning, Liquid Filtration, Automation, Metal Separation
Asin: B0CCDD2X1V | Ean: 6976706300321
Features
- Strong Magnets Rated pull-off force 660 lbs. Rated safty lifting weight 220 lbs.
- !Note! The steel thickness of the adsorption object has a great impact on the actual suction of this product. Please note the curve on the left side and buy carefully. If the steel is thin or has a large surface, please buy several magnets in combination.
- ON/OFF Switch Two gears: ON gear, OFF gear. Press down before rotating. All components are made of metal. Handle and cover made of aluminum alloy, shaft made of SUS304, base made of low-carbon steel.
- Multipurpose This switching magnet can be used in manufacturing, woodworking, welding, car repair, robotics, automation, magnetic fishing, frame fences, mounting devices, cutting and gluing devices, blade guards, work supports, frames, installation of cabinets or anything that makes up your projects faster, safer and easier.
- Safe and Easy to Use Magnetpro magnets are completely non-magnetic when OFF. Adsorbed metal and even dirt fall off automatically. Safe and easy to unload metal You will not cut your fingers when you remove steel chips and dirt.
- Waterproof The main internal parts are oil sealed so it can be used in water. Please clean surface water stains after use as the case is made of nickel-plated steel.
- See more on Amazon...
【On/Off Switch】Two Gears: "On" Gear, "Off" Gear. Press Down Before Rotating. All Components Are Made Of Metal. Handle And Cover Made Of Aluminum Alloy, Shaft Made Of Sus304, Base Made Of Low-Carbon Steel..
【Safe And Easy To Use】 Magnetpro Magnets Are Completely Non-Magnetic When "Off". Adsorbed Metal And Even Dirt Fall Off Automatically. Safe And Easy To Unload Metal You Will Not Cut Your Fingers When You Remove Steel Chips And Dirt..
【Waterproof】The Main Internal Parts Are Oil Sealed So It Can Be Used In Water. Please Clean Surface Water Stains After Use As The Case Is Made Of Nickel-Plated Steel..
【Multipurpose】 This Switching Magnet Can Be Used In Manufacturing, Woodworking, Welding, Car Repair, Robotics, Automation, Magnetic Fishing, Frame Fences, Mounting Devices, Cutting And Gluing Devices, Blade Guards, Work Supports, Frames, Installation Of Cabinets Or Anything That Makes Up Your Projects Faster, Safer And Easier..
【!Note!】The Steel Thickness Of The Adsorption Object Has A Great Impact On The Actual Suction Of This Product. Please Note The Curve On The Left Side And Buy Carefully. If The Steel Is Thin Or Has A Large Surface, Please Buy Several Magnets In Combination..
Brand: Magnetpro | Manufacturer: Magnetpro
Dimensions: 4.72 x 3.54 x 2.36 inches
See On Amazon #7
MAG-MATE PNL0800 Powerlift Magnet, Heavy Duty Magnet, with 3 to 1 Lift Saftey Rating, Rare Earth Magnet with 800 lbs Lifting Capacity, Yellow or Green in Color
Asin: B007H9573M | Model: PNL0800 | PartNumber: PNL0800 | Ean: 0682241264306 | UPC: 682241264306
Features
- Lift with Confidence: Unleash the reliable strength of the Powerlift Lift Magnet- the ultimate solution for heavy duty magnet lifting. Now with our permanent magnetic lifts, you can bid farewell to any worries about load drops during power failures
- Versatile Magnet: Designed to effortlessly lift thick, non-flexing steel on both flat and round surfaces, our magnets redefine versatility in lifting tasks. Our strong magnets are available in a range of capacities to meet your specific needs
- Gentle and Effective Lift Safety: The easy internal manual release of our heavy duty magnet ensures a smooth lifting experience without contacting or damaging the load, maintaining its integrity throughout the process
- High-Temperature Resilience: These strong magnets can withstand heat up to 180 F (82 C). They can maintain their strength and performance even in demanding environments, providing consistent lift safety and power
- Lock On & Off with Precision: The innovative handle on our rare earth magnets feature a positive lock-on and lock-off mechanism, preventing accidental disengagement and ensuring a secure hold every time
- See more on Amazon...
Gentle And Effective Lift Safety: The Easy Internal Manual Release Of Our Heavy Duty Magnet Ensures A Smooth Lifting Experience Without Contacting Or Damaging The Load, Maintaining Its Integrity Throughout The Process.
Lock On & Off With Precision: The Innovative Handle On Our Rare Earth Magnets Feature A Positive Lock-On And Lock-Off Mechanism, Preventing Accidental Disengagement And Ensuring A Secure Hold Every Time.
High-Temperature Resilience: These Strong Magnets Can Withstand Heat Up To 180°F (82°C). They Can Maintain Their Strength And Performance Even In Demanding Environments, Providing Consistent Lift Safety And Power.
Versatile Magnet: Designed To Effortlessly Lift Thick, Non-Flexing Steel On Both Flat And Round Surfaces, Our Magnets Redefine Versatility In Lifting Tasks. Our Strong Magnets Are Available In A Range Of Capacities To Meet Your Specific Needs.
Brand: Mag-Mate | Manufacturer: MAG-MATE
Dimensions: 8.87 x 7.87 x 3.62 Inches | Weight: 21.00 Pounds
See On Amazon #8
Permanent Magnetic Lifter, 2200lbs Pulling Capacity Steel Lifting Magnet, 1000KG Heavy Duty Metal Lift Hoist Shop Crane with Handle, for Material Equipment Lifting
Asin: B0CBFH3GCN | Ean: 0840349979052 | UPC: 840349979052
Features
- 2200 lbs Lifting Capacity: This lifting magnet can lift 2200 lbs loads up. It is secure enough to absorb kinds of steel plate. Item Dimension: 10.6''x5.5''x5.5''. Operating Temperature: < =80 .
- See more on Amazon...
Brand: VEVOR | Manufacturer: VEVOR
Dimensions: 8.30 x 13.80 x 9.10 inches | Weight: 57.00 Pounds
See On Amazon #9
AOMAG 120 lb Magnetic Sheet Handler Lifting Magnet with Release Holder, 720 lbs Breakaway Force, Safety Factor 6:1
Asin: B0CP974TJ2 | Ean: 9084628963221
Features
- Main Body Length = 5.5" Main Body Width = 3.9" Main Body Height = 7.1" Unit Weight = 4 lbs, Housing of handle: Aluminum Alloy
- Rated Lifting Capacity:120 lbs; Breakaway Force: 720 lbs, tested on flat, clean and smooth mild steel plate. Anti-corrosion and anti-rust.
- For lifting or moving sheets, panels, hot or oily parts, protect workers from cuts, slivers, nicks & burns
- Handle sheets horizontally or vertically, place AOMAG magnetic lifter on a steel plate, lift and move it by hand or hoist. To detach the steel plate, press the handle to the OFF side.
- Please check out our Amazon store for more AOMAG magnets products.
- See more on Amazon...
For Lifting Or Moving Sheets, Panels, Hot Or Oily Parts, Protect Workers From Cuts, Slivers, Nicks & Burns.
Please Check Out Our Amazon Store For More Aomag Magnets Products..
Handle Sheets Horizontally Or Vertically, Place Aomag Magnetic Lifter On A Steel Plate, Lift And Move It By Hand Or Hoist. To Detach The Steel Plate, Press The Handle To The Off Side..
Rated Lifting Capacity:120 Lbs; Breakaway Force: 720 Lbs, Tested On Flat, Clean And Smooth Mild Steel Plate. Anti-Corrosion And Anti-Rust..
Brand: AOMAG | Manufacturer: AOMAG
See On Amazon #10
AOMAG Strong Lifting Magnet with Release 255Lbs, Powerful Magnet with Ergonomic Handle, PH-255
Asin: B0CYZPQW6S | Ean: 9084628963665
Features
- 255 lbs pull: This strong magnet with handle really packs a punch. It can pull up to 255 pounds of metal. Beams, doors, sheet metal, or shelving can be picked up or pulled with this magnetic lifting tool. Remember that any paint or other coverings on metallic surfaces will decrease the amount of weight that this magnet can pull.
- Compact-sized permanent magnet: This hand magnet might be small, but the design does not affect the powerful force of this handle magnet. The smaller size allows for the strong magnet to be easily stored in a tool box or tool bench. Relative to its size, This heavy-duty magnet can pull and lift a large amount of other items.
- Multifunctional: the powerful lifting magnet with release is ideal for lifting heavy metal objects. Using this magnet makes lifting sheets of metal easier. The magnet works fantastically to pull out nails from many surfaces. It can also make clean up time more efficient. Just run it over an area Full of waste and ferrous metal to separate the materials and pick up the ferrous metal quickly.
- Comfortable design: The ergonomic aircraft aluminum handle makes using this special magnet easy and comfortable for any project.
- Material temperature should not exceed 80 C. Ndfeb Magnets N52 Grade.
- See more on Amazon...
Multifunctional: The Powerful Lifting Magnet With Release Is Ideal For Lifting Heavy Metal Objects. Using This Magnet Makes Lifting Sheets Of Metal Easier. The Magnet Works Fantastically To Pull Out Nails From Many Surfaces. It Can Also Make Clean Up Time More Efficient. Just Run It Over An Area Full Of Waste And Ferrous Metal To Separate The Materials And Pick Up The Ferrous Metal Quickly..
Material Temperature Should Not Exceed 80°C. Ndfeb Magnets N52 Grade..
Comfortable Design: The Ergonomic Aircraft Aluminum Handle Makes Using This Special Magnet Easy And Comfortable For Any Project..
Compact-Sized Permanent Magnet: This Hand Magnet Might Be Small, But The Design Does Not Affect The Powerful Force Of This Handle Magnet. The Smaller Size Allows For The Strong Magnet To Be Easily Stored In A Tool Box Or Tool Bench. Relative To Its Size, This Heavy-Duty Magnet Can Pull And Lift A Large Amount Of Other Items..
Brand: AOMAG | Manufacturer: AOMAG
See On Amazon #11
HONYTA Magnetic Lifter,1320 Lbs Lifting Capacity,Lifting Magnet with Release,Permanent Lift Magnets,Steel Magnetic Lifter,Magnet for Hoist,Used in Shop Crane,for Lifting Plate Steel,Board
Asin: B08MBVK1HG | Ean: 0765151719736 | UPC: 765151719736
Features
- [NO ELECTRICITY REQUIRED]- Super-powerful "rare earth" neodymium iron boron magnets require no electricity.
- [1320LBS LIFTING CAPACITY]- 1320 lbs (600kg) Steel Magnet Magnetic Lifter. Our products can safely lift goods like plate steel, block or round steel and iron material. Waring: Don't stand under the steel plate!!!
- [GOOD DURABILITY]- Our magnetic lifter is made with N42 magnet. Anticorrosion product has a long service life.
- [EASY OPERATION]- The design of a handle wrapped by rubber and several safe bolts improve the products safety and stability. The rotation of shaft is convenient to control the magnet lifter. It turns left to open the suction and right to close it.
- [WIDE APPLICATION]- Magnetic lifter is used for lifting steel sheet, block, rod, cylindrical and other magnetic material. Widely used in transportation, engineering and automobile industry, etc.
- See more on Amazon...
[Good Durability]- Our Magnetic Lifter Is Made With N42 Magnet. Anticorrosion Product Has A Long Service Life..
[Wide Application]- Magnetic Lifter Is Used For Lifting Steel Sheet, Block, Rod, Cylindrical And Other Magnetic Material. Widely Used In Transportation, Engineering And Automobile Industry, Etc..
[Easy Operation]- The Design Of A Handle Wrapped By Rubber And Several Safe Bolts Improve The Products’ Safety And Stability. The Rotation Of Shaft Is Convenient To Control The Magnet Lifter. It Turns Left To Open The Suction And Right To Close It..
[1320Lbs Lifting Capacity]- 1320 Lbs (600Kg) Steel Magnet Magnetic Lifter. Our Products Can Safely Lift Goods Like Plate Steel, Block Or Round Steel And Iron Material. Waring: Don't Stand Under The Steel Plate!!!.
Brand: HONYTA | Manufacturer: JIANGSU GUORUI HYDRAULIC PRESSURE MACHINE CO.,LTD
Dimensions: 6.00 x 11.40 x 8.00 inches | Weight: 32.00 Pounds
See On Amazon #12
4400 Lbs/2000 kg Magnetic Lifter, Lifting Magnet with Release Heavy Duty Magnet Lifting Hoist Permanent Lift Magnets Steel Magnetic Lifter for Hoist Shop Crane Lifting Plate Steel,Board
Asin: B0CM6BF7YK
Features
- 4400 lbs Lifting Capacity : The N42 magnet makes it have a maximum lifting capacity of 1320 pounds(2000 kg), which is powerful enough to absorb various heavy plate steel, block or round steel and iron material.
- High Stability Hook : High strength alloy hanging ring, and thicker safety bolt can greatly improve the safety and stability of the lift hoist adsorbing steel plates.You don't have to worry about it breaking or deforming when lifting. It adopts highly efficient spraying and galvanizing technology, which provides rust-proof and pressure-resistant performance and long service life.
- Flexible Usage : The design of the rotating shaft is more convenient to control the steel magnetic lifter without the use of electricity (turn to the left/right to open/close the suction). For added security, the limit bolt is designed to fix the handle.
- U-Shaped Groove Design : The design of the U-slot at the bottom of the lifter significantly increases its adsorption area and capacity and makes it have a greater range of use. It is compatible with both flat plates and round steels. This permanent lift magnet is an excellent sheet metal lifting tool for the electricity, engineering, transportation, and mining industries.
- Easy to Install and Storage : The compact magnet lift only measures 10.4*4.3*4.5 inches, so you can easily put it into a small storage cabinet for storage. Simple product structure, included hex key, and detailed English manual can help you quickly and accurately install the body and handle together.
- See more on Amazon...
【Flexible Usage】: The Design Of The Rotating Shaft Is More Convenient To Control The Steel Magnetic Lifter Without The Use Of Electricity (Turn To The Left/Right To Open/Close The Suction). For Added Security, The Limit Bolt Is Designed To Fix The Handle..
【Easy To Install And Storage】: The Compact Magnet Lift Only Measures 10.4*4.3*4.5 Inches, So You Can Easily Put It Into A Small Storage Cabinet For Storage. Simple Product Structure, Included Hex Key, And Detailed English Manual Can Help You Quickly And Accurately Install The Body And Handle Together..
【U-Shaped Groove Design】: The Design Of The U-Slot At The Bottom Of The Lifter Significantly Increases Its Adsorption Area And Capacity And Makes It Have A Greater Range Of Use. It Is Compatible With Both Flat Plates And Round Steels. This Permanent Lift Magnet Is An Excellent Sheet Metal Lifting Tool For The Electricity, Engineering, Transportation, And Mining Industries..
【High Stability Hook】: High Strength Alloy Hanging Ring, And Thicker Safety Bolt Can Greatly Improve The Safety And Stability Of The Lift Hoist Adsorbing Steel Plates.You Don't Have To Worry About It Breaking Or Deforming When Lifting. It Adopts Highly Efficient Spraying And Galvanizing Technology, Which Provides Rust-Proof And Pressure-Resistant Performance And Long Service Life..
Brand: DYRABREST | Manufacturer: GYKNNR6FWDYB8-S
Dimensions: 6.70 x 15.30 x 6.30 inches
See On Amazon #13
EBUY 2200Lbs Magnet Lifting with Release, 1000KG Magnetic Lifter Device, Lifting Magnet with Strong Neodymium Magnets
Asin: B09C8H67FQ | Model: PML-10 | PartNumber: PML-10
Features
- 2200LBS CAPACITY - 2200 lbs 1000kg Magnetic Lifting Capacity. Our products can safely lift goods like plate steel, block or round steel and iron material. Operating Temperature: < =80 .
- GOOD DURABILITY - This magnetic lifter is made with N42 magnet. Excellent painting technology provides anticorrosion, and prevents our product from rusting as well. It will last long and company you for years.
- EASY TO USE - Requires no electrical energy, only switch the handle from side to side for turning on. The handle is wrapped by anti-slip rubber, which providing safety and anti-corrosion.
- Large U-loop Shackle hook allows easy attachment of slings. Wide magnet surface generates tremendous power.
- WIDE APPLICATION - Magnetic lifter is used for lifting steel sheet, block, rod, cylindrical and other magnetic material. Widely used in transportation, engineering and automobile industry, etc.
- See more on Amazon...
【Easy To Use】- Requires No Electrical Energy, Only Switch The Handle From Side To Side For Turning On. The Handle Is Wrapped By Anti-Slip Rubber, Which Providing Safety And Anti-Corrosion..
【Wide Application】- Magnetic Lifter Is Used For Lifting Steel Sheet, Block, Rod, Cylindrical And Other Magnetic Material. Widely Used In Transportation, Engineering And Automobile Industry, Etc..
【Large U-Loop Shackle】 Hook Allows Easy Attachment Of Slings. Wide Magnet Surface Generates Tremendous Power..
【Good Durability】- This Magnetic Lifter Is Made With N42 Magnet. Excellent Painting Technology Provides Anticorrosion, And Prevents Our Product From Rusting As Well. It Will Last Long And Company You For Years..
Brand: EBUY | Manufacturer: EBUY
Dimensions: 4.90 x 11.00 x 5.20 inches | Weight: 59.50 Pounds
See On Amazon #14
Mxmoonant 880lb Permanent Magnetic Lifter Magnet Lifting Hoist with Handle Heavy Duty for Suction Steel Iron Sheet Block
Asin: B0BM9HCZXF
Features
- [SIMPLE OPERATION] - Is it very difficult to transport large steel plates? Mxmoonant magnetic lifter helps you get it done! The switch can be completed by rotating the handle 180 through the operation sign on the lifter, effectively improving the working efficiency.
- [WIDELY APPLICATION] - Magnet lifting hoist are widely used to lift various metals in ports, docks, construction projects and transportation. TIP: It can only be used on iron sheet/iron block with flat surface and thickness more than 5mm. It shall not be used for lifting steel bars and iron chips.
- [STRONG SUCTION CAPACITY] - It is equipped with multiple magnet blocks and a specially designed U slot to increase the adsorption area of the permanent magnet chuck, which can adsorb flat steel plates. [STEEL PLATE SUGGESTION] It is recommended to use steel plate with thickness range of 20-40mm/0.78-1.57 , length and width not more than 800mm/31.49 .
- [MORE SECURE] - Equipped with safety bolt, which is convenient for fixing the handle and improves safety; Anti slip rings, more solid and safe, not easy to deform and fracture; The anti-skid handle can effectively prevent the handle from being wet and slippery due to long use time.
- [AFTER SALES SERVICE] - If you have any other question about product, please feel free to let us know. We re always ready to assist you.
- See more on Amazon...
[Strong Suction Capacity] - It Is Equipped With Multiple Magnet Blocks And A Specially Designed U Slot To Increase The Adsorption Area Of The Permanent Magnet Chuck, Which Can Adsorb Flat Steel Plates. [Steel Plate Suggestion] It Is Recommended To Use Steel Plate With Thickness Range Of 20-40Mm/0.78-1.57’’, Length And Width Not More Than 800Mm/31.49’’..
[After Sales Service] - If You Have Any Other Question About Product, Please Feel Free To Let Us Know. We’Re Always Ready To Assist You..
[More Secure] - Equipped With Safety Bolt, Which Is Convenient For Fixing The Handle And Improves Safety; Anti Slip Rings, More Solid And Safe, Not Easy To Deform And Fracture; The Anti-Skid Handle Can Effectively Prevent The Handle From Being Wet And Slippery Due To Long Use Time..
[Widely Application] - Magnet Lifting Hoist Are Widely Used To Lift Various Metals In Ports, Docks, Construction Projects And Transportation. Tip: It Can Only Be Used On Iron Sheet/Iron Block With Flat Surface And Thickness More Than 5Mm. It Shall Not Be Used For Lifting Steel Bars And Iron Chips..
Brand: Mxmoonant | Manufacturer: Mxmoonant
See On Amazon #15
Magswitch 8100088 MLAY1000 Lifting Magnet, Pivoting Head, Heavy-Duty Lifting, Powerful Lift Hook, for Flat Steel and Porous Materials
Asin: B0021IYJA6 | Model: 8100088 | PartNumber: 8100088 | Ean: 0878628000531 | UPC: 878628000531
Features
- LIGHTWEIGHT AND COMPACT: Magswitch Heavy Lifters are built for heavy-duty lifting. Our magnetic technology is powerful without the need for a power source. The dual lift hook offers the stability to lift horizontally and a single hook to lift into a vertical position.
- FOR THINNER MATERIALS: More effective than the competition on thinner materials, these lifting magnets are ideal for heavy lifting. The MLAY1000 series lifters achieve full hold on approximately 1in (25.4mm) thick steel.
- FOR FLAT MATERIALS: Holds flat and round non-flexing material. With full field saturation (hold force) at 1.0in (25.4mm), this lifter is ideal for porous material and thick steel.
- PIVOTING HEAD: These lifters feature our full swivel hook for lifting from the top or the side. Each lifter is manually activated and features a safety lock in both on and off position.
- STRONGER THAN THE COMPETITORS: Magwitch Lifters are lighter and stronger, pound for pound, than competitive shunting Switchable magnets. The super strong single 70 Is rated at 375 lbs. (3x factor of safety) breakaway on 1/2 inch and thicker flat metal.
- See more on Amazon...
For Flat Materials: Holds Flat And Round Non-Flexing Material. With Full Field Saturation (Hold Force) At 1.0In (25.4Mm), This Lifter Is Ideal For Porous Material And Thick Steel..
Stronger Than The Competitors: Magwitch Lifters Are Lighter And Stronger, Pound For Pound, Than Competitive Shunting Switchable Magnets. The Super Strong "Single 70" Is Rated At 375 Lbs. (3X Factor Of Safety) Breakaway On 1/2 Inch And Thicker Flat Metal..
Pivoting Head: These Lifters Feature Our Full Swivel Hook For Lifting From The Top Or The Side. Each Lifter Is Manually Activated And Features A Safety Lock In Both On And Off Position..
For Thinner Materials: More Effective Than The Competition On Thinner Materials, These Lifting Magnets Are Ideal For Heavy Lifting. The Mlay1000 Series Lifters Achieve Full Hold On Approximately 1In (25.4Mm) Thick Steel..
Brand: Magswitch | Manufacturer: Magswitch Technology Inc.
Dimensions: 10.00 x 2.80 x 5.80 inches | Weight: 1.00 Pounds
See On Amazon #16
Mophorn Lifting Magnet with Release,1320 Lbs Pulling Force - Steel Magnetic Lifter,Neodymium - Permanent Lift Magnets,Heavy Duty - for Hoist, Shop Crane, Block, Board
Asin: B01LZKO172 | Model: MER | PartNumber: MER | Ean: 0712166585900 | UPC: 712166585900
Features
- weight capacity- magnetic lifter max weight: 600kg/1320 lbs. max weight for curved surfaces: 200kg/440lbs
- material-use advanced n45 magnet material to provide super strong magnetism
- easy use- magnetic lifter have double safety handle; handle with on/off control - attach or detach material
- v slot of bottom lifting face- lift round and flat material. large u-loop shackle hook allows easy attachment of slings
- widely use- magnetic lifter is made with super strong neodymium magnets, which is used for lifting steel sheet, block, rod, cylindrical and other magnetic material
- See more on Amazon...
Easy Use- Magnetic Lifter Have Double Safety Handle; Handle With On/Off Control - Attach Or Detach Material.
Widely Use- Magnetic Lifter Is Made With Super Strong Neodymium Magnets, Which Is Used For Lifting Steel Sheet, Block, Rod, Cylindrical And Other Magnetic Material.
V Slot Of Bottom Lifting Face- Lift Round And Flat Material. Large U-Loop Shackle Hook Allows Easy Attachment Of Slings.
Material-Use Advanced N45 Magnet Material To Provide Super Strong Magnetism.
Brand: Mophorn | Manufacturer: VEVOR
Dimensions: 4.33 x 8.27 x 4.33 inches | Weight: 44.10 Pounds
See On Amazon #17
MAG-MATE PNL PNL0250 Powerlift Magnet, Heavy Duty Magnet, with 3 to 1 Lift Safety, Rare Earth Magnet with 250 lbs Lifting Capacity, Yellow or Green in Color
Asin: B007H92VNG | Model: PNL0250 | PartNumber: PNL0250 | Ean: 0682241217203, 0682241264207 | UPC: 682241264207, 682241217203
Features
- Lift with Confidence: Unleash the reliable strength of the Powerlift Lift Magnet- the ultimate solution for heavy duty magnet lifting. Now with our permanent magnetic lifts, you can bid farewell to any worries about load drops during power failures
- Versatile Magnet: Designed to effortlessly lift thick, non-flexing steel on both flat and round surfaces, our magnets redefine versatility in lifting tasks. Our strong magnets are available in a range of capacities to meet your specific needs
- Gentle and Effective Lift Safety: The easy internal manual release of our heavy duty magnet ensures a smooth lifting experience without contacting or damaging the load, maintaining its integrity throughout the process
- High-Temperature Resilience: These strong magnets can withstand heat up to 180 F (82 C). They can maintain their strength and performance even in demanding environments, providing consistent lift safety and power
- Lock On & Off with Precision: The innovative handle on our rare earth magnets feature a positive lock-on and lock-off mechanism, preventing accidental disengagement and ensuring a secure hold every time
- See more on Amazon...
Gentle And Effective Lift Safety: The Easy Internal Manual Release Of Our Heavy Duty Magnet Ensures A Smooth Lifting Experience Without Contacting Or Damaging The Load, Maintaining Its Integrity Throughout The Process.
Lock On & Off With Precision: The Innovative Handle On Our Rare Earth Magnets Feature A Positive Lock-On And Lock-Off Mechanism, Preventing Accidental Disengagement And Ensuring A Secure Hold Every Time.
High-Temperature Resilience: These Strong Magnets Can Withstand Heat Up To 180°F (82°C). They Can Maintain Their Strength And Performance Even In Demanding Environments, Providing Consistent Lift Safety And Power.
Versatile Magnet: Designed To Effortlessly Lift Thick, Non-Flexing Steel On Both Flat And Round Surfaces, Our Magnets Redefine Versatility In Lifting Tasks. Our Strong Magnets Are Available In A Range Of Capacities To Meet Your Specific Needs.
Brand: Mag-Mate | Manufacturer: Industrial Magnetics Inc
Dimensions: 6.62 x 5.00 x 2.62 inches
See On Amazon #18
Magnetpro Multipurpose Switch Magnet, 220 LB Pull-Off Force Switchable Magnetic System, On/Off Magnet for Lifting, Working&Welding Positioning, Liquid Filtration, Automation, Metal Separation
Asin: B0C4V7PW6Y | Model: 100 KG | PartNumber: 100 KG | Ean: 6976706300314
Features
- Strong Magnets Rated pull-off force 220 lbs. Rated safty lifting weight 73 lbs. Dimensions: 2.36 x 1.73 x 3.25 inches (6 x 4.4 x 8.26 cm).
- !Note! The steel thickness of the adsorption object has a great impact on the actual suction of this product. Please note the curve on the left side and buy carefully. If the steel is thin or has a large surface, please buy several magnets in combination.
- ON/OFF Switch Two gears: ON gear, OFF gear. Press down before rotating. All components are made of metal. Handle and cover made of aluminum alloy, shaft made of SUS304, base made of low-carbon steel.
- Multipurpose This switching magnet can be used in manufacturing, woodworking, welding, car repair, robotics, automation, magnetic fishing, frame fences, mounting devices, cutting and gluing devices, blade guards, work supports, frames, installation of cabinets or anything that makes up your projects faster, safer and easier.
- Safe and Easy to Use Magnetpro magnets are completely non-magnetic when OFF. Adsorbed metal and even dirt fall off automatically. Safe and easy to unload metal. You will not cut your fingers when you remove steel chips and dirt.
- Waterproof The main internal parts are oil sealed so it can be used in water. Please clean surface water stains after use as the case is made of nickel-plated steel.
- See more on Amazon...
【On/Off Switch】Two Gears: "On" Gear, "Off" Gear. Press Down Before Rotating. All Components Are Made Of Metal. Handle And Cover Made Of Aluminum Alloy, Shaft Made Of Sus304, Base Made Of Low-Carbon Steel..
【Safe And Easy To Use】Magnetpro Magnets Are Completely Non-Magnetic When "Off". Adsorbed Metal And Even Dirt Fall Off Automatically. Safe And Easy To Unload Metal. You Will Not Cut Your Fingers When You Remove Steel Chips And Dirt..
【Waterproof】The Main Internal Parts Are Oil Sealed So It Can Be Used In Water. Please Clean Surface Water Stains After Use As The Case Is Made Of Nickel-Plated Steel..
【Multipurpose】This Switching Magnet Can Be Used In Manufacturing, Woodworking, Welding, Car Repair, Robotics, Automation, Magnetic Fishing, Frame Fences, Mounting Devices, Cutting And Gluing Devices, Blade Guards, Work Supports, Frames, Installation Of Cabinets Or Anything That Makes Up Your Projects Faster, Safer And Easier..
【!Note!】The Steel Thickness Of The Adsorption Object Has A Great Impact On The Actual Suction Of This Product. Please Note The Curve On The Left Side And Buy Carefully. If The Steel Is Thin Or Has A Large Surface, Please Buy Several Magnets In Combination..
Brand: Magnetpro | Manufacturer: Magnetpro
Dimensions: 3.25 x 2.36 x 1.73 inches
See On Amazon #19
Pase Magnetic Lifter 660 LBS with Relese, Permanent Lift Magnetics, Steel Magnetic Lifter for Hoist and Lifting Palet Steel, Board
Asin: B0C3SVFV39
Features
- 880 LBS CAPACITY - 880 lbs 400kg Magnetic Lifting Capacity. Our products can safely lift goods like plate steel, block or round steel and iron material. Operating Temperature: < =80 .
- GOOD DURABILITY - This magnetic lifter is made with N42 magnet. Excellent painting technology provides anticorrosion, and prevents our product from rusting as well. It will last long and company you for years.
- EASY TO USE - Requires no electrical energy, only switch the handle from side to side for turning on. The handle is wrapped by anti-slip rubber, which providing safety and anti-corrosion.
- WIDE APPLICATION - Magnetic lifter is used for lifting steel sheet, block, rod, cylindrical and other magnetic material. Widely used in transportation, engineering and automobile industry, etc.
- Large U-loop Shackle hook allows easy attachment of slings. Wide magnet surface generates tremendous power.
- See more on Amazon...
【Easy To Use】- Requires No Electrical Energy, Only Switch The Handle From Side To Side For Turning On. The Handle Is Wrapped By Anti-Slip Rubber, Which Providing Safety And Anti-Corrosion..
【Large U-Loop Shackle】 Hook Allows Easy Attachment Of Slings. Wide Magnet Surface Generates Tremendous Power..
【Wide Application】- Magnetic Lifter Is Used For Lifting Steel Sheet, Block, Rod, Cylindrical And Other Magnetic Material. Widely Used In Transportation, Engineering And Automobile Industry, Etc..
【Good Durability】- This Magnetic Lifter Is Made With N42 Magnet. Excellent Painting Technology Provides Anticorrosion, And Prevents Our Product From Rusting As Well. It Will Last Long And Company You For Years..
Brand: HONYTA | Manufacturer: Pase
See On Amazon #20
INTBUYING 880lb Permanent Magnetic Lifter,Heavy Duty Magnet,Powerful Permanent Rare Earth Magnet,Economical Magnet Lifting Tools for Lifting Plate Steel, Board, Used in Shop Crane, Hoist, Board
Asin: B0CWSNB935 | Ean: 0840403702831 | UPC: 840403702831
Features
- Parameters--Net weight:15KG(33lb), operating temperature: 80 C, maximum weight capacity: 400kg(880lb). With small size, light weight, no electricity need and strong holding force, the product has a safety factor of 3 times the rated lifting gravity.
- High-strength rings--The heavy duty magnet comes with a large U-loop shackle hook, which can easily connect the sling. Corrosion resistance, no deformation, no fracture, safe and stable, strong and durable.
- Non-slip during use--The permanent magnetic lifter adopts high-quality magnetic materials with strong adsorption capacity. It is designed with a rubber-wrapped handle, which can greatly increase the friction and prevent slipping from lifting. permanent magnet crane.
- Easy to use--No electricity needed, only rotate the handle to change the magnetic force of the internal magnetic system, then the permanent magnet chuck will be in work on or off state.Only need one person can complete it, saving labor and time, with highly efficiency.
- Wide application--The permanent magnet jack is used for lifting and handling steel materials, leveling mechanical parts and molds, widely used in machinery, mold manufacturing, automobiles, shipbuilding, docks, factories and transportation industries.
- Notice--Do not stand under the steel sheet when lifting!
- See more on Amazon...
✅Non-Slip During Use--The Permanent Magnetic Lifter Adopts High-Quality Magnetic Materials With Strong Adsorption Capacity. It Is Designed With A Rubber-Wrapped Handle, Which Can Greatly Increase The Friction And Prevent Slipping From Lifting. Permanent Magnet Crane..
✅Wide Application--The Permanent Magnet Jack Is Used For Lifting And Handling Steel Materials, Leveling Mechanical Parts And Molds, Widely Used In Machinery, Mold Manufacturing, Automobiles, Shipbuilding, Docks, Factories And Transportation Industries..
✅Notice--Do Not Stand Under The Steel Sheet When Lifting!.
✅Easy To Use--No Electricity Needed, Only Rotate The Handle To Change The Magnetic Force Of The Internal Magnetic System, Then The Permanent Magnet Chuck Will Be In Work On Or Off State.Only Need One Person Can Complete It, Saving Labor And Time, With Highly Efficiency..
✅High-Strength Rings--The Heavy Duty Magnet Comes With A Large U-Loop Shackle Hook, Which Can Easily Connect The Sling. Corrosion Resistance, No Deformation, No Fracture, Safe And Stable, Strong And Durable..
Brand: INTBUYING | Manufacturer: INTBUYING
See On Amazon #21
RYFT Magnetic Lifter, 1320Lbs Permanent Lift Magnets with Release, 600KG Lifting Magnet with Strong Neodymium Magnets, Used in Shop Crane, for Hoist, Board, Lifting Plate Steel
Asin: B0925PG44Q | Model: 1320LBS | PartNumber: 1320LBS | Ean: 0742221436267 | UPC: 742221436267
Features
- [NO ELECTRICITY REQUIRED]- Super-powerful "rare earth" neodymium iron boron magnets require no electricity.
- [1320LBS LIFTING CAPACITY]- 1320 lbs Steel Magnet Magnetic Lifter. Our products can safely lift goods like plate steel, block or round steel and iron material.
- [LONG SERVICE LIFE]- Our magnetic lifter is made with N42 magnet. Anticorrosion product has a long service life.
- [EASY OPERATION]- The design of a handle wrapped by rubber and several safe bolts improve the products safety and stability.
- [WIDE APPLICATION]- Magnetic lifter is used for lifting steel sheet, block, rod, cylindrical and other magnetic material.
- [WARING]- Don't stand under the steel plate!!!
- See more on Amazon...
[Long Service Life]- Our Magnetic Lifter Is Made With N42 Magnet. Anticorrosion Product Has A Long Service Life..
[Wide Application]- Magnetic Lifter Is Used For Lifting Steel Sheet, Block, Rod, Cylindrical And Other Magnetic Material..
[Waring]- Don't Stand Under The Steel Plate!!!.
[Easy Operation]- The Design Of A Handle Wrapped By Rubber And Several Safe Bolts Improve The Products’ Safety And Stability..
[1320Lbs Lifting Capacity]- 1320 Lbs Steel Magnet Magnetic Lifter. Our Products Can Safely Lift Goods Like Plate Steel, Block Or Round Steel And Iron Material..
Brand: RYFT | Manufacturer: RYFT
Dimensions: 4.30 x 9.00 x 4.30 inches | Weight: 33.00 Pounds
See On Amazon #22
EBUY 3300Lbs Magnet Lifting with Release, 1500KG Magnetic Lifter Device, Lifting Magnet with Strong Neodymium Magnets
Asin: B0CMSZC3WY | Model: PML-15 | PartNumber: PML-15
Features
- 3300LBS CAPACITY - 3300 lbs 1500kg Magnetic Lifting Capacity. Our products can safely lift goods like plate steel, block or round steel and iron material. Operating Temperature: < =80 .
- GOOD DURABILITY - This magnetic lifter is made with N42 magnet. Excellent painting technology provides anticorrosion, and prevents our product from rusting as well. It will last long and company you for years.
- EASY TO USE - Requires no electrical energy, only switch the handle from side to side for turning on. The handle is wrapped by anti-slip rubber, which providing safety and anti-corrosion.
- Large U-loop Shackle hook allows easy attachment of slings. Wide magnet surface generates tremendous power.
- WIDE APPLICATION - Magnetic lifter is used for lifting steel sheet, block, rod, cylindrical and other magnetic material. Widely used in transportation, engineering and automobile industry, etc.
- See more on Amazon...
【Easy To Use】- Requires No Electrical Energy, Only Switch The Handle From Side To Side For Turning On. The Handle Is Wrapped By Anti-Slip Rubber, Which Providing Safety And Anti-Corrosion..
【Wide Application】- Magnetic Lifter Is Used For Lifting Steel Sheet, Block, Rod, Cylindrical And Other Magnetic Material. Widely Used In Transportation, Engineering And Automobile Industry, Etc..
【Large U-Loop Shackle】 Hook Allows Easy Attachment Of Slings. Wide Magnet Surface Generates Tremendous Power..
【Good Durability】- This Magnetic Lifter Is Made With N42 Magnet. Excellent Painting Technology Provides Anticorrosion, And Prevents Our Product From Rusting As Well. It Will Last Long And Company You For Years..
Brand: EBUY | Manufacturer: EBUY
Dimensions: 5.50 x 13.80 x 5.20 inches
See On Amazon #23
Happybuy Steel Magnetic Lifter 4400 LB Metal Lifting Magnet 2000 KG Neodymium Magnetic Lift Hoist Shop Crane(2000KG)
Asin: B07CXS3396 | Ean: 0601707111190 | UPC: 601707111190
Features
- 4400 lbs Lifting Capacity: This lifting magnet can lift 4400 lbs loads up. It is secure enough to absorb kinds of steel plate. Item Dimension: 15.3''x6.3''x6.7''. Operating Temperature: < =80 .
- Rugged Magnetic Construction: The steel magnetic lifter is made with N42 magnet. Highly efficient painting finish is smooth and bright and not easy to corrode or rust. When adsorbing the round steels, the U-shape magnet can only provide 30%-50% of the adsorption force.
- Security Mechanism: Constructed of a rubber-wrapped handle, a high-strength shackle hook, and several fixing bolts, The lifting magnet greatly enhances the security and stability and makes your lifting work more convenient.
- Flexible Usage: The design of the lever rotating shaft is more convenient to control the magnet lifter. Just turn left to open the suction and right to close the suction. And the security bolt can fix the handle precisely.
- Various Application Area: An excellent sheet metal lifting tool for electricity, engineering, transportation, and mining world. Compatible for lifting steel sheet, block, rod, cylindrical, and other magnetic material. Note: Please clean the surface of the steel sheet before using it to prevent the decrease of magnetic force.
- See more on Amazon...
Security Mechanism: Constructed Of A Rubber-Wrapped Handle, A High-Strength Shackle Hook, And Several Fixing Bolts, The Lifting Magnet Greatly Enhances The Security And Stability And Makes Your Lifting Work More Convenient..
Various Application Area: An Excellent Sheet Metal Lifting Tool For Electricity, Engineering, Transportation, And Mining World. Compatible For Lifting Steel Sheet, Block, Rod, Cylindrical, And Other Magnetic Material. Note: Please Clean The Surface Of The Steel Sheet Before Using It To Prevent The Decrease Of Magnetic Force..
Flexible Usage: The Design Of The Lever Rotating Shaft Is More Convenient To Control The Magnet Lifter. Just Turn Left To Open The Suction And Right To Close The Suction. And The Security Bolt Can Fix The Handle Precisely..
Rugged Magnetic Construction: The Steel Magnetic Lifter Is Made With N42 Magnet. Highly Efficient Painting Finish Is Smooth And Bright And Not Easy To Corrode Or Rust. When Adsorbing The Round Steels, The U-Shape Magnet Can Only Provide 30%-50% Of The Adsorption Force..
Brand: Happybuy | Manufacturer: Happybuy
See On Amazon #24
HONYTA Magnetic Lifter,660 Lbs Lifting Capacity,Lifting Magnet with Release,Permanent Lift Magnets,Steel Magnetic Lifter,Magnet for Hoist,Used in Shop Crane,for Lifting Plate Steel,Board
Asin: B08XJ2HWY3 | Ean: 0741774231565 | UPC: 741774231565
Features
- NO ELECTRICITY REQUIRED - Super-powerful "rare earth" neodymium iron boron magnets require no electricity.
- 660LBS LIFTING CAPACITY - 660 lbs 300kg Steel Magnet Magnetic Lifter. Our products can safely lift goods like plate steel, block or round steel and iron material. Waring: Don't stand under the steel plate!!!
- GOOD DURABILITY - Our magnetic lifter is made with N42 magnet. Anticorrosion product has a long service life.
- EASY OPERATION - The design of a handle wrapped by rubber and several safe bolts improve the products safety and stability. The rotation of shaft is convenient to control the magnet lifter. It turns left to open the suction and right to close it.
- WIDE APPLICATION - Magnetic lifter is used for lifting steel sheet, block, rod, cylindrical and other magnetic material. Widely used in transportation, engineering and automobile industry, etc.
- See more on Amazon...
💪【Good Durability】- Our Magnetic Lifter Is Made With N42 Magnet. Anticorrosion Product Has A Long Service Life..
💪【Wide Application】- Magnetic Lifter Is Used For Lifting Steel Sheet, Block, Rod, Cylindrical And Other Magnetic Material. Widely Used In Transportation, Engineering And Automobile Industry, Etc..
💪【Easy Operation】- The Design Of A Handle Wrapped By Rubber And Several Safe Bolts Improve The Products’ Safety And Stability. The Rotation Of Shaft Is Convenient To Control The Magnet Lifter. It Turns Left To Open The Suction And Right To Close It..
💪【660Lbs Lifting Capacity】- 660 Lbs（300Kg） Steel Magnet Magnetic Lifter. Our Products Can Safely Lift Goods Like Plate Steel, Block Or Round Steel And Iron Material. Waring: Don't Stand Under The Steel Plate!!!.
Brand: HONYTA | Manufacturer: HONYTA
See On Amazon #25
Allegro Industries 9401 25 Magnetic Lid Lifter, Steel Dolly, Magnet Lift, Weight 660 lb Flat Items, 330 lb Round Items
Asin: B00TD6JC5G | Model: 9401‐25 | PartNumber: 9401‐25 | Ean: 0741851940250 | UPC: 741851940250
Features
- The Dolly is made of steel construction
- Dual position lifting points provide the power to break loose the most stubborn covers
- Magnet clamps to cover without any special tools
- Magnet eliminates the use of pry bars
- Magnet (lift weight: 660 lbs. (299 kg) flat items, 330 lbs. (149 kg) round items)
- See more on Amazon...
Magnet Clamps To Cover Without Any Special Tools.
Magnet (Lift Weight: 660 Lbs. (299 Kg) Flat Items, 330 Lbs. (149 Kg) Round Items).
Magnet Eliminates The Use Of Pry Bars.
Dual Position Lifting Points Provide The Power To Break Loose The Most Stubborn Covers.
Brand: Allegro Industries | Manufacturer: Allegro Industries
Weight: 63.00 pounds
See On Amazon #26
INTSUPERMAI Steel Magnetic Lifter Lifting Magnet with Release Heavy Duty Permanent Lift Magnets for Hoist Shop Crane Block Board 880LB / 400KG
Asin: B0922FZ41B | Model: SY170 | PartNumber: SY170 | Ean: 0794590770619 | UPC: 794590770619
Features
- 1. Strong suction This steel magnetic lifter has a strong load capacity: the Max. Lifting Capacity: 400 KG/880 LB; It uses the complete big magnet and the advanced magnetic system, the magnetic force is very strong. Operating Temperature: < =80
- 2. V-groove design The bottom of the lifting magnet is designed with widened and enlarged V groove, which can lift round steel and flat material. The application object is more extensive.
- 3. Galvanized lifting ring The ring of the permanent lift magnet is made of alloy steel and galvanized with high strength. It is more durable, not easy to deform, not easy to break and not easy to rust. The outer layer of the machine is baking paint design, which is waterproof.
- 4. Upgrade the rotating shaft Its rotating shaft is made of thickened material. It can rotate 180 degrees, it can rotate flexibly, which is convenient to improve work efficiency and safety.
- 5. Clear indication signs Clear operation mark makes the operation easier. There are on and off signs beside the rotating shaft; Also, there is a clear relationship diagram between plate thickness and lifting capacity on the side of theLifting Magnet, which is convenient to check at any time and make it more convenient for customers to use.
- See more on Amazon...
3.【Galvanized Lifting Ring】The Ring Of The Permanent Lift Magnet Is Made Of Alloy Steel And Galvanized With High Strength. It Is More Durable, Not Easy To Deform, Not Easy To Break And Not Easy To Rust. The Outer Layer Of The Machine Is Baking Paint Design, Which Is Waterproof..
5.【Clear Indication Signs】Clear Operation Mark Makes The Operation Easier. There Are On And Off Signs Beside The Rotating Shaft; Also, There Is A Clear Relationship Diagram Between Plate Thickness And Lifting Capacity On The Side Of Thelifting Magnet, Which Is Convenient To Check At Any Time And Make It More Convenient For Customers To Use..
4.【Upgrade The Rotating Shaft】Its Rotating Shaft Is Made Of Thickened Material. It Can Rotate 180 Degrees, It Can Rotate Flexibly, Which Is Convenient To Improve Work Efficiency And Safety..
2.【V-Groove Design】 The Bottom Of The Lifting Magnet Is Designed With Widened And Enlarged "V" Groove, Which Can Lift Round Steel And Flat Material. The Application Object Is More Extensive..
Brand: INTSUPERMAI | Manufacturer: INTSUPERMAI
See On Amazon #27
Magnetic Lifter 660lbs/300kg Pulling Capacity, Permanent Lifting Magnet with Release, Neodymium & Steel, 2.5 Safety Factor, Metal Lift Magnet, Heavy Duty Magnet for Hoist, Shop Crane, Block, Orange
Asin: B0CNJX4JTS
Features
- 300KG/660LB LIFTING CAPACITY: With a powerful lifting capacity of 300kg/660lbs, our magnetic lifter can safely handle goods such as steel plates, blocks, or round steel and iron materials. Available in various capacities, our powerful lifting magnet caters to your specific needs. Product size: 7.87x3.62x3.85 inches. Weight: 19.84 lbs
- SAFE & DURABLE: With a 2.5 times safety factor, our lift magnet prioritizes safety without compromising on strength. The rubber-covered handle, high-intensity detachable hook, and secure fixing bolts enhance the overall safety of the product, providing you with peace of mind during operation
- FLEXIBLE USE & HASSLE-FREE OPERATION: Equipped with a flexible swivel shaft that rotates 180 degrees, our magnetic lifter ensures optimal maneuverability. The safety bolts for securing the handle and the easy-to-use on/off mechanism enhance efficiency during your lifting tasks. Simply turn left to open the suction and right to close it with ease
- BUILT TO LAST: Crafted from alloy steel and featuring a neodymium magnet, our high power magnet is resistant to corrosion and rust, guaranteeing a long product life. The alloy steel pull ring adds durability, ensuring that it won't break or deform easily under heavy-duty usage
- CLEAR INDICATION MARK & QUALITY GUARANTEE: Our heavy duty magnet features clear on and off signs next to the spindle for easy operation. Additionally, a convenient graph displaying the relationship between plate thickness and lifting capacity is provided on the side of the magnet, allowing you to check at a glance. If you have any questions or concerns, please contact us. We will reply to you within 24 hours and do our best to make things right
- See more on Amazon...
Flexible Use & Hassle-Free Operation: Equipped With A Flexible Swivel Shaft That Rotates 180 Degrees, Our Magnetic Lifter Ensures Optimal Maneuverability. The Safety Bolts For Securing The Handle And The Easy-To-Use On/Off Mechanism Enhance Efficiency During Your Lifting Tasks. Simply Turn Left To Open The Suction And Right To Close It With Ease.
Clear Indication Mark & Quality Guarantee: Our Heavy Duty Magnet Features Clear On And Off Signs Next To The Spindle For Easy Operation. Additionally, A Convenient Graph Displaying The Relationship Between Plate Thickness And Lifting Capacity Is Provided On The Side Of The Magnet, Allowing You To Check At A Glance. If You Have Any Questions Or Concerns, Please Contact Us. We Will Reply To You Within 24 Hours And Do Our Best To Make Things Right.
Built To Last: Crafted From Alloy Steel And Featuring A Neodymium Magnet, Our High Power Magnet Is Resistant To Corrosion And Rust, Guaranteeing A Long Product Life. The Alloy Steel Pull Ring Adds Durability, Ensuring That It Won't Break Or Deform Easily Under Heavy-Duty Usage.
Safe & Durable: With A 2.5 Times Safety Factor, Our Lift Magnet Prioritizes Safety Without Compromising On Strength. The Rubber-Covered Handle, High-Intensity Detachable Hook, And Secure Fixing Bolts Enhance The Overall Safety Of The Product, Providing You With Peace Of Mind During Operation.
Brand: Auworx | Manufacturer: PML-3-300-1
See On Amazon #28
Allegro Industries 9401-26 Magnetic Lid Lifter, Steel Dolly, Heavy Duty Magnet Lift, Weight 900 lb Flat Items, 450 lb Round Items, Orange
Asin: B00TD6JBP2 | Model: 9401‐26 | PartNumber: 9401‐26 | Ean: 0741851940205 | UPC: 741851940205
Features
- The Dolly is made of steel construction
- Dual position lifting points provide the power to break loose the most stubborn covers
- Magnet clamps to cover without any special tools
- Magnet eliminates the use of pry bars
- Magnet (lift weight: 900 lbs. (408 kg) flat items, 450 lbs. (204 kg) round items)
- See more on Amazon...
Magnet Clamps To Cover Without Any Special Tools.
Magnet (Lift Weight: 900 Lbs. (408 Kg) Flat Items, 450 Lbs. (204 Kg) Round Items).
Magnet Eliminates The Use Of Pry Bars.
Dual Position Lifting Points Provide The Power To Break Loose The Most Stubborn Covers.
Brand: Allegro Industries | Manufacturer: Allegro Industries
Dimensions: 13.90 x 42.30 x 16.10 Inches | Weight: 69.00 Pounds
See On Amazon #29
Kewam Steel Magnetic Lifter 2200 LB /1000 KG Metal Lifting Magnet, Permanent Lifting Magnet with Release,for Hoist, Shop Crane, Block, Board
Asin: B0BY1V4XHR | Ean: 0742440621246 | UPC: 742440621246
Features
- [NO ELECTRICITY REQUIRED]- Super-powerful "rare earth" neodymium iron boron magnets require no electricity.
- [2200LBS LIFTING CAPACITY]- 2200 lbs Steel Magnet Magnetic Lifter. Our products can safely lift 100kg goods like plate steel, block or round steel and iron material.
- [LONG SERVICE LIFE]- Our magnetic lifter is made with N42 magnet. Anticorrosion product has a long service life.
- [EASY OPERATION]- The design of a handle wrapped by rubber and several safe bolts improve the products safety and stability.
- [WIDE APPLICATION]- Magnetic lifter is used for lifting steel sheet, block, rod, cylindrical and other magnetic material.
- [WARING]- Don't stand under the steel plate!!!
- See more on Amazon...
[Long Service Life]- Our Magnetic Lifter Is Made With N42 Magnet. Anticorrosion Product Has A Long Service Life..
[Wide Application]- Magnetic Lifter Is Used For Lifting Steel Sheet, Block, Rod, Cylindrical And Other Magnetic Material..
[Waring]- Don't Stand Under The Steel Plate!!!.
[Easy Operation]- The Design Of A Handle Wrapped By Rubber And Several Safe Bolts Improve The Products’ Safety And Stability..
[2200Lbs Lifting Capacity]- 2200 Lbs Steel Magnet Magnetic Lifter. Our Products Can Safely Lift 100Kg Goods Like Plate Steel, Block Or Round Steel And Iron Material..
Brand: RYFT | Manufacturer: RYFT
Dimensions: 4.90 x 11.00 x 5.20 Inches | Weight: 58.00 Pounds
See On Amazon #30
VEVOR Permanent Magnetic Lifting with Release, 1320 lbs/600kg Heavy Duty Magnet, 2.5 Safety Factor, Neodymium & Steel for Hoist, Shop Crane, Block, Board Lifting Plate Steel
Asin: B0CJQYCS7S | Model: PML-600 | PartNumber: PML-600 | Ean: 0197988462927 | UPC: 197988462927
Features
- 1320 lbs Lifting Capacity: Built with N42 neodymium magnets, our permanent magnetic lifter can lift 1320 lbs/600 kg loads. With an upgraded 2.5 safety factor, it is solid and reliable enough to lift steel sheets, blocks, rods, cylindrical, and other magnetic materials.
- Heavy-Duty Chrome-Plated Hook: The hook of our hoist magnet is made from high-strength steel with a chrome finish. You don't have to worry about it breaking or deforming when lifting. Its chrome-plated surface is smoother, more rust-proof, and easier to clean.
- Security Handle Design: The magnet for hoist is designed with a chrome-plated anti-collision handle. Press the safety switch to rotate the handle, avoiding the risk of accidental startup and ensuring security. The handle is rubber-wrapped for slip resistance and a comfortable grip.
- U-Shaped Groove: The U-shaped bottom groove is compatible with both flat plates and round steels, boosting a wider range of applications. This permanent lift magnet is an excellent sheet metal lifting tool for the electricity, engineering, transportation, and mining industries.
- Operate Without Sweat: Our permanent magnet crane features a flexible rotating shaft, making it easier to control the switch. Just turn left to turn on the suction and right to turn off the suction. For added security, the limit bolt is designed to fix the handle.
- See more on Amazon...
Security Handle Design: The Magnet For Hoist Is Designed With A Chrome-Plated Anti-Collision Handle. Press The Safety Switch To Rotate The Handle, Avoiding The Risk Of Accidental Startup And Ensuring Security. The Handle Is Rubber-Wrapped For Slip Resistance And A Comfortable Grip..
Operate Without Sweat: Our Permanent Magnet Crane Features A Flexible Rotating Shaft, Making It Easier To Control The Switch. Just Turn Left To Turn On The Suction And Right To Turn Off The Suction. For Added Security, The Limit Bolt Is Designed To Fix The Handle..
U-Shaped Groove: The U-Shaped Bottom Groove Is Compatible With Both Flat Plates And Round Steels, Boosting A Wider Range Of Applications. This Permanent Lift Magnet Is An Excellent Sheet Metal Lifting Tool For The Electricity, Engineering, Transportation, And Mining Industries..
Heavy-Duty Chrome-Plated Hook: The Hook Of Our Hoist Magnet Is Made From High-Strength Steel With A Chrome Finish. You Don't Have To Worry About It Breaking Or Deforming When Lifting. Its Chrome-Plated Surface Is Smoother, More Rust-Proof, And Easier To Clean..
Brand: VEVOR | Manufacturer: VEVOR
Dimensions: 9.10 x 13.00 x 9.70 inches | Weight: 41.00 Pounds
See On Amazon
Looking For Something Else?
Search