Best Desoldering Wicks - Buying Guide
Last Updated: 04/28/2024
Share on
Bestselling Desoldering Wicks on Amazon
- Lesnow solder wick braid 10ft Length Desoldering Wick Braid Remover Tool Solder Sucker 1 piece No-Cl...
- MG Chemicals 426 Desoldering Braid #4 Fine Braid Super Wick with RMA Flux, 5' Length x 0.1" Width, Blue
- Herain No-Clean Solder Wick, Desoldering Braided Wicks, Desoldering Wicks Removal Tool Solder Sucker...
- SRA Soldering Wick with Flat Woven Copper Desoldering Braid Strip and No Clean Flux for Easy Damage-...
- TOWOT Solder Wick Braid with Flux No-Clean Electronic, Desoldering Wick Braid Remover.Desolder Solde...
- TOWOT Solder Wick Braid With Flux No-Clean Electronic, Desoldering Wick Braid Remover.Desolder Solde...
- NTE Electronics SW02-10 No-Clean Solder Wick, 4 Blue, 098" Width, 10' Length
- MG Chemicals - 443 Desoldering Braid #3 Fine Braid Super Wick with RMA Flux, 25' Length x 0.075" Wid...
- Mogaopi Desoldering Wick, Desoldering Pump, Solder Sucker, Solder Wick, 2pcs Solder Braid (2.5mm Wid...
- AUSTOR Desoldering Sucker and 6 Pcs Solder Braid Wick (2.0mm/2.5mm/3.0mm Width, 1.5m Length) with Fl...
#1
Lesnow solder wick braid 10ft Length Desoldering Wick Braid Remover Tool Solder Sucker 1 piece No-Clean soldering Wick Wire Roll and Disassemble Electrical Components
Asin: B094GZ6CPZ | Model: Lesnow-FT-01 | PartNumber: Lesnow-FT-01 | Ean: 0606727905286 | UPC: 606727905286
Features
- The solder wicks can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more
- 1 pieces of no-clean solder wicks, each wick is about 10ft long and 0.1 inch in width, enough quantity and length for your daily needs
- This desoldering wick has geometrically-precise weave with copper, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area.
- The desoldering wicks are made of copper wires with nice quality, precise weaving design can improve the capillary effect and the redundant solder absorbing ability, increasing your efficiency
- The braided solder wicks are suitable for labs, home and industry welding work, practical tools to remove solder and correct errors on small PCB boards, bringing lots of convenience for your work
- See more on Amazon...
🌟This Desoldering Wick Has Geometrically-Precise Weave With Copper, Work From The Tip Of The Desoldering Wick, Once The Desoldering Wick And The Solder Has Been Heated, The Solder Braid Can Quickly Absorbed Molten Solder And Left A Clean Working Area..
🌟The Braided Solder Wicks Are Suitable For Labs, Home And Industry Welding Work, Practical Tools To Remove Solder And Correct Errors On Small Pcb Boards, Bringing Lots Of Convenience For Your Work.
🌟The Desoldering Wicks Are Made Of Copper Wires With Nice Quality, Precise Weaving Design Can Improve The Capillary Effect And The Redundant Solder Absorbing Ability, Increasing Your Efficiency.
🌟1 Pieces Of No-Clean Solder Wicks, Each Wick Is About 10Ft Long And 0.1 Inch In Width, Enough Quantity And Length For Your Daily Needs.
Brand: Lesnow | Manufacturer: Lesnow-FT
Dimensions: 0.50 x 5.00 x 4.00 Inches | Weight: 0.50 ounces
See On Amazon #2
MG Chemicals 426 Desoldering Braid #4 Fine Braid Super Wick with RMA Flux, 5' Length x 0.1" Width, Blue
Asin: B008O9VLA2 | Model: 426 | PartNumber: 426 | Ean: 0779008426005 | UPC: 779008426005
Features
- Oxide-free clean copper
- Static free bobbins
- Only pure type 'RMA' rosin is used meeting the requirements of MIL-F-14256F (ANSI/J-STD-0004)
- Manufactured under SPC guidelines
- Designed to leave a residue that is environmentally safe
- See more on Amazon...
Only Pure Type 'Rma' Rosin Is Used Meeting The Requirements Of Mil-F-14256F (Ansi/J-Std-0004).
Designed To Leave A Residue That Is Environmentally Safe.
Manufactured Under Spc Guidelines.
Static Free Bobbins.
Brand: MG Chemicals | Manufacturer: MG Chemicals
Dimensions: 0.04 x 0.04 x 0.01 Inches | Weight: 0.02 pounds
See On Amazon #3
Herain No-Clean Solder Wick, Desoldering Braided Wicks, Desoldering Wicks Removal Tool Solder Sucker, Desoldering Wick Used to Remove the Solder and Disassemble Electrical Components
Asin: B09B9DF96D | Model: XXX00 | PartNumber: XXX00 | Ean: 0632296853406 | UPC: 632296853406
Features
- 1.High-quality materials: The solder wick is geometrically precisely braided with high-quality copper wire, which is resistant to oxidation and corrosion, has good thermal conductivity, low residual and no halide, and clean tin absorption.
- 2.Geometric braid design: The desoldering wick adopts a precise geometric braid design, which ensures a large surface tension and tin absorption ability, and reduces the risk of thermal damage to the circuit board.
- 3.Widely used: No-clean solder braid is suitable for welding work in laboratories, industries, schools and homes, It is suitable for all kinds of electronics, electrical appliances, precision instruments and meters. It can absorb tin quickly and a large amount of tin, and is dedicated to remove excess solder.
- 4.Easy to use: Desoldering braid is used to absorb excess solder when removing tin, the fine woven design promotes strong capillary action to suck in excess solder. The main board desoldering spot is removed, and it is used with the soldering station.
- 5.Ingenuity quality: 1 piece of no-clean solder braided wicks (0.078 inch wide, 9.84 ft length), which is sufficient to meet your work requirements. If you have any product questions, you can contact us at any time.
- See more on Amazon...
3.Widely Used: No-Clean Solder Braid Is Suitable For Welding Work In Laboratories, Industries, Schools And Homes, It Is Suitable For All Kinds Of Electronics, Electrical Appliances, Precision Instruments And Meters. It Can Absorb Tin Quickly And A Large Amount Of Tin, And Is Dedicated To Remove Excess Solder..
5.Ingenuity Quality: 1 Piece Of No-Clean Solder Braided Wicks (0.078 Inch Wide, 9.84 Ft Length), Which Is Sufficient To Meet Your Work Requirements. If You Have Any Product Questions, You Can Contact Us At Any Time..
4.Easy To Use: Desoldering Braid Is Used To Absorb Excess Solder When Removing Tin, The Fine Woven Design Promotes Strong Capillary Action To Suck In Excess Solder. The Main Board Desoldering Spot Is Removed, And It Is Used With The Soldering Station..
2.Geometric Braid Design: The Desoldering Wick Adopts A Precise Geometric Braid Design, Which Ensures A Large Surface Tension And Tin Absorption Ability, And Reduces The Risk Of Thermal Damage To The Circuit Board..
Brand: Herain | Manufacturer: Herain
Dimensions: 0.40 x 1.85 x 1.85 Inches
See On Amazon #4
SRA Soldering Wick with Flat Woven Copper Desoldering Braid Strip and No Clean Flux for Easy Damage-Free Solder Removal - 3 Pack 10 Foot Solder Wick Spool
Asin: B09PZLZSNT | Model: SW-2.5-NC-10-3P | PartNumber: SW-2.5-NC-10-3P | Ean: 0742383847994 | UPC: 742383847994
Features
- 10ft Super Sized Desolder Spools: 30 Feet of standard width .098" desoldering wick infused with no-clean flux for fast and efficient solder wicking action.
- High Quality Materials: Impurity-free woven copper desolder braid construction with 3% no-clean flux provides superior conductivity, even at low temperatures.
- Easy to Use: Simply place desolder wick over work and apply heat to remove solder from parts and terminals, break solder bridges, and correct other soldering mistakes.
- Fast & Effective Wicking: Unique gap-weave coated solder wick braid absorbs solder quickly like a sponge, reducing the likelihood of overheating and lifted pads.
- PCB Safe Residues: Desolder wick leaves little flux residue that is non-conductive and non-corrosive so it requires no cleaning. This product is also RoHs compliant.
- See more on Amazon...
Easy To Use: Simply Place Desolder Wick Over Work And Apply Heat To Remove Solder From Parts And Terminals, Break Solder Bridges, And Correct Other Soldering Mistakes..
Pcb Safe Residues: Desolder Wick Leaves Little Flux Residue That Is Non-Conductive And Non-Corrosive So It Requires No Cleaning. This Product Is Also Rohs Compliant..
Fast & Effective Wicking: Unique Gap-Weave Coated Solder Wick Braid Absorbs Solder Quickly Like A Sponge, Reducing The Likelihood Of Overheating And Lifted Pads..
High Quality Materials: Impurity-Free Woven Copper Desolder Braid Construction With 3% No-Clean Flux Provides Superior Conductivity, Even At Low Temperatures..
Brand: SRA Soldering Products | Manufacturer: SRA Soldering Products
See On Amazon #5
TOWOT Solder Wick Braid with Flux No-Clean Electronic, Desoldering Wick Braid Remover.Desolder Soldering 2.5mm W 0.10'' L 5'
Asin: B09XGY9M5H | Model: SW-2515 | PartNumber: SW-2515
Features
- Quality materials The Braided Desoldering Wicks are made of 100% copper wires with a fine braid design. Using flat stitch weaving, fast heat conduction, to promote strong capillary action to pull in excess solder.
- Easy to use: the desoldering wicks can provide an easier way to correct mistakes on small PCB boards and will not make damage to the board, clean small components, suitable for re-soldering and desoldering.
- Extensive applications: the braided solder wicks are suitable for labs, school, home, and industrial welding work; And the wicks adopt a fine braid design to promote strong capillary action, bringing more convenience to your daily work.
- Low residue design: No-Clean solder wick braid will just leave little residues after use and the residues are non-conductive and non-corrosive, no need to waste your time cleaning it.
- Warranty If you have any questions, please feel free to contact us at any time. Thank you!
- See more on Amazon...
Extensive Applications: The Braided Solder Wicks Are Suitable For Labs, School, Home, And Industrial Welding Work; And The Wicks Adopt A Fine Braid Design To Promote Strong Capillary Action, Bringing More Convenience To Your Daily Work..
Warranty ：If You Have Any Questions, Please Feel Free To Contact Us At Any Time. Thank You!.
Low Residue Design: No-Clean Solder Wick Braid Will Just Leave Little Residues After Use And The Residues Are Non-Conductive And Non-Corrosive, No Need To Waste Your Time Cleaning It..
Easy To Use: The Desoldering Wicks Can Provide An Easier Way To Correct Mistakes On Small Pcb Boards And Will Not Make Damage To The Board, Clean Small Components, Suitable For Re-Soldering And Desoldering..
Brand: TOWOT | Manufacturer: TOWOT
See On Amazon #6
TOWOT Solder Wick Braid With Flux No-Clean Electronic, Desoldering Wick Braid Remover.Desolder Soldering 2mm W 0.08'' L 9.8'
Asin: B093ZYF99G
Features
- Quality materials The Braided Desoldering Wicks are made of 100% copper wires with a fine braid design. Using flat stitch weaving, fast heat conduction, to promote strong capillary action to pull in excess solder.
- Easy to use: the desoldering wicks can provide an easier way to correct mistakes on small PCB boards and will not make damage to the board, clean small components, suitable for re-soldering and desoldering.
- Extensive applications: the braided solder wicks are suitable for labs, school, home, and industrial welding work; And the wicks adopt a fine braid design to promote strong capillary action, bringing more convenience to your daily work.
- Low residue design: No-Clean solder wick braid will just leave little residues after use and the residues are non-conductive and non-corrosive, no need to waste your time cleaning it.
- Warranty If you have any questions, please feel free to contact us at any time. Thank you!
- See more on Amazon...
Extensive Applications: The Braided Solder Wicks Are Suitable For Labs, School, Home, And Industrial Welding Work; And The Wicks Adopt A Fine Braid Design To Promote Strong Capillary Action, Bringing More Convenience To Your Daily Work..
Warranty ：If You Have Any Questions, Please Feel Free To Contact Us At Any Time. Thank You!.
Low Residue Design: No-Clean Solder Wick Braid Will Just Leave Little Residues After Use And The Residues Are Non-Conductive And Non-Corrosive, No Need To Waste Your Time Cleaning It..
Easy To Use: The Desoldering Wicks Can Provide An Easier Way To Correct Mistakes On Small Pcb Boards And Will Not Make Damage To The Board, Clean Small Components, Suitable For Re-Soldering And Desoldering..
Brand: TOWOT | Manufacturer: TOWOT
Dimensions: 0.39 x 118.11 x 0.08 Inches | Weight: 0.01 pounds
See On Amazon #7
NTE Electronics SW02-10 No-Clean Solder Wick, 4 Blue, 098" Width, 10' Length
Asin: B0195UVWJ8 | Model: SW02-10 | PartNumber: SW02-10 | Ean: 0768249099987 | UPC: 768249099987
Features
- Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes
- Residue left behind is halide free and non-conductive, so it does not have to be cleaned off the board
- 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder
- Available with standard or anti-static bobbins
- See more on Amazon...
100% Copper Wick Has Fine Braid Design To Promote Strong Capillary Action To Pull In Excess Solder.
Available With Standard Or Anti-Static Bobbins.
Residue Left Behind Is Halide Free And Non-Conductive, So It Does Not Have To Be Cleaned Off The Board.
Brand: NTE Electronics | Manufacturer: NTE Electronics, Inc.
Weight: 0.00 pounds
See On Amazon #8
MG Chemicals - 443 Desoldering Braid #3 Fine Braid Super Wick with RMA Flux, 25' Length x 0.075" Width, Green
Asin: B005T8TJG4 | Model: 443 | PartNumber: 443 | Ean: 0779008443002 | UPC: 779008443002
Features
- Oxide-free clean copper
- Static free bobbins
- Only pure type 'RMA' rosin is used meeting the requirements of MIL-F-14256F (ANSI/J-STD-0004)
- Manufactured under SPC guidelines
- Designed to leave a residue that is environmentally safe
- See more on Amazon...
Only Pure Type 'Rma' Rosin Is Used Meeting The Requirements Of Mil-F-14256F (Ansi/J-Std-0004).
Designed To Leave A Residue That Is Environmentally Safe.
Manufactured Under Spc Guidelines.
Static Free Bobbins.
First Available: 05/11/2020
Brand: MG Chemicals | Manufacturer: MG Chemicals
Dimensions: 0.30 x 2.30 x 2.20 Inches | Weight: 0.00 Pounds
Warranty: warranty@mgchemicals.com
See On Amazon #9
Mogaopi Desoldering Wick, Desoldering Pump, Solder Sucker, Solder Wick, 2pcs Solder Braid (2.5mm Width, 1.5m Length) Solder Wire, Replacement Tip, Desoldering Vacuum Pump Solder Removal Tool
Asin: B09BBBY4HP | Model: 366D | PartNumber: 366D | Ean: 0751242241705 | UPC: 751242241705
Features
- 6-in-1 Solder Removal Tool : 2 pcs Desoldering Wire, 1pcs Solder Wire, 1pcs Desoldering Pump, 1pcs Replacement Tip, 1pcs Protective Tube(15cm Length), a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts.
- Desoldering Wick with Copper Braid - Solder wire, replacement tip, 2pcs solder braid (3.5mm/2.0mm Width, 1.5m Length). 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder.
- One-handed solder sucker with powerful suction : Whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and vacuum button, which make the sucking power awesome.
- ABS Body with Non-slip Sponge and Nylon Nozzle Solder Wick - The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold. Right or Left handed design allows easy one-handed use.
- Widely used Solder Remover :The Desoldering Wick & Desoldering Pump can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more.
- See more on Amazon...
【One-Handed Solder Sucker With Powerful Suction】: Whether You Are Right Or Left-Handed, You Can Using The Desoldering Pump By Just Cocking It And Pressing The Trigger Button With One Hand When You Are Ready, The Desoldering Pump Designed With Double Ring Double Open And "Vacuum" Button, Which Make The Sucking Power Awesome..
【Widely Used Solder Remover】:The Desoldering Wick & Desoldering Pump Can Be Used To Correct Mistakes With Small Boards On Pcbs, Remove Relays And Other Components From Printed Circuit Boards, Re-Solder Mechanical Keyboard Switches, Unsoldering Old Wire From Devices, Desoldering Computer Parts Such As A Motherboard,Clean Alloy On Smd Components And More..
Abs Body With Non-Slip Sponge And Nylon Nozzle Solder Wick - The Body Of The Desoldering Vacuum Pump Is Made Of High Quality Abs, Which Make The Solder Sucker Delicate And Durable, Also The Covered Sponge Can Absorb Sweat And Heat, Make It Comfortable To Hold. Right Or Left Handed Design Allows Easy One-Handed Use..
Desoldering Wick With Copper Braid - Solder Wire, Replacement Tip, 2Pcs Solder Braid (3.5Mm/2.0Mm Width, 1.5M Length). 100% Copper Wick Has Fine Braid Design To Promote Strong Capillary Action To Pull In Excess Solder..
Brand: MOGAOPI | Manufacturer: MOGAOPI
Dimensions: 0.79 x 8.27 x 0.79 Inches | Weight: 0.22 Pounds
See On Amazon #10
AUSTOR Desoldering Sucker and 6 Pcs Solder Braid Wick (2.0mm/2.5mm/3.0mm Width, 1.5m Length) with Flux - Desoldering Vacuum Pump Solder Removal Tool
Asin: B07CB9V427 | Ean: 0601263548355 | UPC: 601263548355
Features
- High efficiency solder sucker - the desoldering pump designed with double ring and "vacuum" open button, you can remove solder from circuit board effectively by cocking it and pressing the trigger button with one hand
- Desoldering braid wick with rosin - 6 pieces copper solder braid in 3 size, width 2.0mm/2.5mm/3.0mm, length 1.5m, 2 pieces for each size; geometrically-precise weave, can be used to clean the spare solder on the pin away to avoid short circuit, to meet your various of soldering needs
- High quality material - the desoldering pump body made of premium quality ABS material, with non-slip sponge and nylon nozzle, anti-static, heat resistant and durable
- Wide application - correcting mistakes on small PCB boards, removing relays and other components from printed circuit boards, cleaning small components, re-soldering and desoldering
- 7-in-1 solder removal tool - 1pcs solder sucker and 6pcs solder wicks in 3 size
- See more on Amazon...
High Quality Material - The Desoldering Pump Body Made Of Premium Quality Abs Material, With Non-Slip Sponge And Nylon Nozzle, Anti-Static, Heat Resistant And Durable.
7-In-1 Solder Removal Tool - 1Pcs Solder Sucker And 6Pcs Solder Wicks In 3 Size.
Wide Application - Correcting Mistakes On Small Pcb Boards, Removing Relays And Other Components From Printed Circuit Boards, Cleaning Small Components, Re-Soldering And Desoldering.
Desoldering Braid Wick With Rosin - 6 Pieces Copper Solder Braid In 3 Size, Width 2.0Mm/2.5Mm/3.0Mm, Length 1.5M, 2 Pieces For Each Size; Geometrically-Precise Weave, Can Be Used To Clean The Spare Solder On The Pin Away To Avoid Short Circuit, To Meet Your Various Of Soldering Needs.
Brand: AUSTOR | Manufacturer: AUSTOR
Dimensions: 0.79 x 7.48 x 5.12 Inches
See On Amazon #11
MG Chemicals 425-NS No Clean Super Wick Desoldering Braid, 0.075" Width x 5' Length, Pack of 1
Asin: B00424S2C8 | Model: 425-NS | PartNumber: 425-NS | Ean: 0779008425558 | UPC: 779008425558
Features
- Conforms to MIL-F-14256E RMA flux and J-STD-004
- High purity, oxide-free copper
- ESD (Electrostatic Dissipative) safe for 1.5 m [5 ft] bobbins
- Environmentally and PCB safe residues
- NSF, Nonfood Compounds Program Listed P1, NSF Registration #144209
- See more on Amazon...
Esd (Electrostatic Dissipative) Safe For 1.5 M [5 Ft] Bobbins.
Nsf, Nonfood Compounds Program Listed P1, Nsf Registration #144209.
Environmentally And Pcb Safe Residues.
High Purity, Oxide-Free Copper.
Brand: MG Chemicals | Manufacturer: MG Chemicals
Dimensions: 0.39 x 1.57 x 1.57 Inches | Weight: 0.02 Pounds
Warranty: warranty@mgchemicals.com
See On Amazon #12
BEEYUIHF 3M/10ft 2.5mm Desoldering wick Braid, Solder wick Braid with Flux, No-clean Solder Remover wire Kit,Cable Remover Tool Solder Sucker,w 0.10'' L 9.8' (1 Piece 2.5mm 3m)
Asin: B0CB3QGXR8 | Model: US-RX2530 | PartNumber: US-RX2530
Features
- BEEYUIHF Desoldering wick with flux Size: w 0.10'' L 9.8'; width:2.5mm, Length: 3M/10ft
- Solder Remover wire Materials The tin suction line is woven with flat needles, soft design,fast heat conduction, suitable for rapid tin suction, not only improving work efficiency and quality, but also more clean.The Braided Desoldering wicks are made of 100% copper wires with a fine braid design.
- Desoldering wick advantage: Refined chemical formula, resistant to oxidation and corrosion,clean tin absorption.Fast heat conduction, suitable for various electronic PCB circuit boards.
- The desoldering wicks Feature: Oxidation resistivity and anti-corrosion protection,good thermal conductivity. Speed up the speed of absorbing tin and low residue of flux. Increase the speed of cleaning the PCB pad.
- Solder wick Braid wide range of use: The braided solder wick is suitable for studio, laboratory, school, home, professional repair, DIY hobbyist and industrial soldering work; and the wick is designed with fine weave, Increase the speed of cleaning the PCB pad. Bring convenience to your welding work.
- See more on Amazon...
Desoldering Wick Advantage: Refined Chemical Formula, Resistant To Oxidation And Corrosion,Clean Tin Absorption.Fast Heat Conduction, Suitable For Various Electronic Pcb Circuit Boards..
Solder Wick Braid Wide Range Of Use: The Braided Solder Wick Is Suitable For Studio, Laboratory, School, Home, Professional Repair, Diy Hobbyist And Industrial Soldering Work; And The Wick Is Designed With Fine Weave, Increase The Speed Of Cleaning The Pcb Pad. Bring Convenience To Your Welding Work..
The Desoldering Wicks Feature: Oxidation Resistivity And Anti-Corrosion Protection,Good Thermal Conductivity. Speed Up The Speed Of Absorbing Tin And Low Residue Of Flux. Increase The Speed Of Cleaning The Pcb Pad..
Solder Remover Wire Materials：The Tin Suction Line Is Woven With Flat Needles, Soft Design,Fast Heat Conduction, Suitable For Rapid Tin Suction, Not Only Improving Work Efficiency And Quality, But Also More Clean.The Braided Desoldering Wicks Are Made Of 100% Copper Wires With A Fine Braid Design..
Brand: BEEYUIHF | Manufacturer: BEEYUIHF
Dimensions: 0.20 x 0.20 x 0.20 Inches
See On Amazon #13
MG Chemicals - 454-NS Desoldering Braid #4 No Clean Super Wick Desoldering Braid, 0.1" Width x 50' Length, Blue
Asin: B005T8UN0K | Model: 454-NS | PartNumber: 454-NS | Ean: 0779008454558 | UPC: 779008454558
Features
- No clean super wick
- Flux residue is non-conductive and non-corrosive. Static free bobbins.
- Flux residue remaining on board does not have to be cleaned
- High SIR-meets the requirements of both the bellcore specification TR-TSY-000078 and IPC test method III
- Disclaimer: Color may vary slightly according to screen settings and resolution
- See more on Amazon...
Flux Residue Remaining On Board Does Not Have To Be Cleaned.
Disclaimer: Color May Vary Slightly According To Screen Settings And Resolution.
High Sir-Meets The Requirements Of Both The Bellcore Specification Tr-Tsy-000078 And Ipc Test Method Iii.
Flux Residue Is Non-Conductive And Non-Corrosive. Static Free Bobbins..
Brand: MG Chemicals | Manufacturer: MG Chemicals
Dimensions: 0.80 x 3.00 x 3.00 Inches | Weight: 0.11 pounds
Warranty: warranty@mgchemicals.com
See On Amazon #14
VIRALLOY No Clean Flux Solder Wick Braid Length 10ft Width 2.5mm Solder Copper Static Dissipative Bobbin Desoldering Wick Solder Remover Wick Desolder Electronic Components - Pack of 1
Asin: B0B1PFSFQT | Model: SW-2530 | PartNumber: SW-2530 | Ean: 0195893076680 | UPC: 195893076680
Features
- Are you looking for a flux wick and an effective and efficient way to remove solder from your circuit boards? Look no further than the VIRALLOY No Clean Solder Flux Desoldering Braid!
- Made from pure copper wires woven together with a no-clean flux formula, this solder braid wick is designed to absorb and remove solder from your circuit boards quickly and easily
- The ergonomic design of the solder flux remover desoldering wick ensures that it will leave little to no residue after use, and the residues that are left behind are non-conductive and halide-free
- Plus, the flux for soldering copper soldering wick is easy to use - simply place it over the area where you want to remove the solder and heat it up
- The solder tape will absorb the solder, leaving your circuit board clean and free of unwanted solder. So why wait? Get the VIRALLOY No Clean Desolder Wick today and make desoldering a breeze!
- See more on Amazon...
The Ergonomic Design Of The Solder Flux Remover Desoldering Wick Ensures That It Will Leave Little To No Residue After Use, And The Residues That Are Left Behind Are Non-Conductive And Halide-Free.
The Solder Tape Will Absorb The Solder, Leaving Your Circuit Board Clean And Free Of Unwanted Solder. So Why Wait? Get The Viralloy No Clean Desolder Wick Today And Make Desoldering A Breeze!.
Plus, The Flux For Soldering Copper Soldering Wick Is Easy To Use - Simply Place It Over The Area Where You Want To Remove The Solder And Heat It Up.
Made From Pure Copper Wires Woven Together With A No-Clean Flux Formula, This Solder Braid Wick Is Designed To Absorb And Remove Solder From Your Circuit Boards Quickly And Easily.
Brand: VIRALLOY | Manufacturer: VIRALLOY
Dimensions: 0.39 x 2.12 x 2.12 Inches
See On Amazon #15
Chemtronics, 80-4-10, Desoldering Wick, 10 ft., 4, Copper, Rosin
Asin: B00FS7AK3C | Model: 80-4-10 | PartNumber: 80-4-10 | Ean: 0325990329710 | UPC: 325990329710
Features
- SODER- WICK ROSIN SD FLUX DESOLDERING BRAID, WIDTH: 0.11, LENGTH: 10 FEET, FEATURES: DESIGNED FOR
- GENERAL PURPOSE SOLDER REMOVAL
- See more on Amazon...
General Purpose Solder Removal.
Brand: Chemtronics | Manufacturer: Chemtronics
Dimensions: 1.00 x 2.00 x 2.00 Inches | Weight: 0.04 pounds
See On Amazon #16
Hotop 6 Pieces Solder Wicks No-Clean Solder Braided Wicks Desoldering Wicks, 1.5 meter Length (Multi-color,1 mm, 1.5 mm, 2 mm, 2.5 mm, 3 mm, 3.5 mm)
Asin: B0987HK6R1
Features
- What you get: come with 6 pieces of no-clean solder wicks in different size, including 0.04 inch, 0.05 inch, 0.07 inch, 0.1 inch, 0.12 inch, 0.14 inch in width and 1.5 m/ 5 feet long, enough quantity and length for your daily needs
- No-clean design: the solder braided wicks will just leave little residues after use and the residues are non-conductive and non-corrosive, you do not need to spending time removing them from the boards
- Reliable material: the desoldering wicks are made of copper wires with nice quality, precise weaving design can improve the capillary effect and the redundant solder absorbing ability, increasing your efficiency
- Wide applications: the braided solder wicks are suitable for labs, home and industry welding work, practical tools to remove solder and correct errors on small PCB boards, bringing lots of convenience for your work
- Easy to use: the desoldering wicks can provide a easier way to correct mistakes on small PCB boards and will not make damage to the board, clean small components, suitable for re-soldering and desoldering
- See more on Amazon...
Reliable Material: The Desoldering Wicks Are Made Of Copper Wires With Nice Quality, Precise Weaving Design Can Improve The Capillary Effect And The Redundant Solder Absorbing Ability, Increasing Your Efficiency.
Easy To Use: The Desoldering Wicks Can Provide A Easier Way To Correct Mistakes On Small Pcb Boards And Will Not Make Damage To The Board, Clean Small Components, Suitable For Re-Soldering And Desoldering.
Wide Applications: The Braided Solder Wicks Are Suitable For Labs, Home And Industry Welding Work, Practical Tools To Remove Solder And Correct Errors On Small Pcb Boards, Bringing Lots Of Convenience For Your Work.
No-Clean Design: The Solder Braided Wicks Will Just Leave Little Residues After Use And The Residues Are Non-Conductive And Non-Corrosive, You Do Not Need To Spending Time Removing Them From The Boards.
Brand: Hotop | Manufacturer: Hotop
See On Amazon #17
NTE Electronics SW04-10 No-Clean Solder Wick with Anti-Static Bobbin, 4 Blue.098" Width, 10' Length, One Size
Asin: B007Z7Y7XM | Model: SW04-10 | PartNumber: SW04-10 | Ean: 0768249100782 | UPC: 768249100782
Features
- Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on type-r fluxes
- Residue left behind is Halide free and non-conductive, so it does NOT have to be cleaned off the board
- 100 percent copper wick has fine braid design to promote strong capillary action to pull in excess solder
- Available with standard or anti-static bobbins
- See more on Amazon...
100 Percent Copper Wick Has Fine Braid Design To Promote Strong Capillary Action To Pull In Excess Solder.
Available With Standard Or Anti-Static Bobbins.
Residue Left Behind Is Halide Free And Non-Conductive, So It Does Not Have To Be Cleaned Off The Board.
Brand: NTE Electronics | Manufacturer: NTE Electronics, Inc.
Weight: 0.00 Pounds
See On Amazon #18
Tabiger Solder Wick & Desoldering Pump, Solder Sucker & Desoldering Wick, 2pcs Solder Braid (2.5mm Width, 1.5m Length)- Desoldering Vacuum Pump Solder Remover
Asin: B0777LMVTT | Model: . | PartNumber: . | Ean: 0766894880417 | UPC: 766894880417
Features
- Easy to Use Solder Sucker Whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome.
- Desoldering Wick with Copper Braid 2pcs solder braid with the size 2.5mm Width, 1.5m Length, this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area.
- Premium Desoldering Pump The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold, the nylon nozzle of the solder suck can endure high temperature, thus it can be used for a long time.
- 3-in-1 Solder Removal Tool 1pcs desoldering vacuum pumps and 2pcs solder wicks, a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts.
- Widely Used Solder Remover The Desoldering Wick & Desoldering Pump can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more.
- See more on Amazon...
【Premium Desoldering Pump】The Body Of The Desoldering Vacuum Pump Is Made Of High Quality Abs, Which Make The Solder Sucker Delicate And Durable, Also The Covered Sponge Can Absorb Sweat And Heat, Make It Comfortable To Hold, The Nylon Nozzle Of The Solder Suck Can Endure High Temperature, Thus It Can Be Used For A Long Time..
【Widely Used Solder Remover】The Desoldering Wick & Desoldering Pump Can Be Used To Correct Mistakes With Small Boards On Pcbs, Remove Relays And Other Components From Printed Circuit Boards, Re-Solder Mechanical Keyboard Switches, Unsoldering Old Wire From Devices, Desoldering Computer Parts Such As A Motherboard,Clean Alloy On Smd Components And More..
【3-In-1 Solder Removal Tool】1Pcs Desoldering Vacuum Pumps And 2Pcs Solder Wicks, A Must-Have Tool For Electronics Kit, The Desoldering Wick Absorbs Solder, The Desoldering Pump Pulls It Away Quick, While The Solder Wick Is Better For Small Amounts Of Solder, The Solder Sucker Takes Up Large Amounts..
【Desoldering Wick With Copper Braid】2Pcs Solder Braid With The Size 2.5Mm Width, 1.5M Length, This Desoldering Wick Has Geometrically-Precise Weave With Copper And Rosin, Work From The Tip Of The Desoldering Wick, Once The Desoldering Wick And The Solder Has Been Heated, The Solder Braid Can Quickly Absorbed Molten Solder And Left A Clean Working Area..
Brand: Tabiger | Manufacturer: TABIGER
Dimensions: 0.70 x 9.00 x 4.00 Inches | Weight: 0.17 Pounds
See On Amazon #19
Essmtuin Solder Wick Braid 2x10Ft with Flux for Electronic, 2 Roll Desoldering Wick Braid Remover Solder, No-Clean Soldering Wick Used to Disassemble Electrical Components (WID 0.08in (2.0mm))
Asin: B0CCW8NQ7R | Model: XXX-2530 | PartNumber: XXX-2530
Features
- Works Excellent for Desoldering Items
- Easy to Use: The Desoldering Wick Provides a Simpler Way to Correct Errors on Small PCB Boards Without Damaging the Board, Cleaning Small Components, and is Suitable for Re-soldering and Desoldering Tasks
- Low Residue: No Clean Solder Wick, As Only a Small Amount of Residue is Left After Use, Saving You Time On Cleaning
- Making Tin Removal Easier, This is An Essential Product for Repairing Electronic Circuit Boards
- Used in Conjunction With a Vacuum Desoldering Tool and Soldering iron, Experienced Technicians Can Effortlessly Remove Solder from Circuit Board Components To Reset, Remove, or Replace Through-Hole Parts
- See more on Amazon...
Low Residue: No Clean Solder Wick, As Only A Small Amount Of Residue Is Left After Use, Saving You Time On Cleaning.
Used In Conjunction With A Vacuum Desoldering Tool And Soldering Iron, Experienced Technicians Can Effortlessly Remove Solder From Circuit Board Components To Reset, Remove, Or Replace "Through-Hole" Parts.
Making Tin Removal Easier, This Is An Essential Product For Repairing Electronic Circuit Boards.
Easy To Use: The Desoldering Wick Provides A Simpler Way To Correct Errors On Small Pcb Boards Without Damaging The Board, Cleaning Small Components, And Is Suitable For Re-Soldering And Desoldering Tasks.
Brand: Essmetuin | Manufacturer: ZHUOBAO
Dimensions: 1.90 x 1.90 x 0.56 Inches
See On Amazon #20
MG Chemicals - 452 Desoldering Braid #2 Fine Braid Super Wick with RMA Flux, 50' Length x 0.05" Width, Yellow
Asin: B008O9W908 | Model: 452 | PartNumber: 452 | Ean: 0779008452004 | UPC: 779008452004
Features
- Oxide-free clean copper
- Static free bobbins
- Only pure type 'RMA' rosin is used meeting the requirements of MIL-F-14256F (ANSI/J-STD-0004)
- Manufactured under SPC guidelines
- Designed to leave a residue that is environmentally safe
- See more on Amazon...
Only Pure Type 'Rma' Rosin Is Used Meeting The Requirements Of Mil-F-14256F (Ansi/J-Std-0004).
Designed To Leave A Residue That Is Environmentally Safe.
Manufactured Under Spc Guidelines.
Static Free Bobbins.
Brand: MG Chemicals | Manufacturer: MG Chemicals
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 0.11 pounds
Warranty: warranty@mgchemicals.com
See On Amazon #21
caihongwei caihv-Welding Rod, Solder Wick 1.0mm-2.5mm 3.0mm 3.5mm 4.0mm Desoldering Braid Wire, Tin Remover BGA Welding Soldering Tools, Strong and Durable (Diameter : 4.0mm)
Asin: B09BDVC9JD | Model: caihongwei | PartNumber: caihongwei | Ean: 7375995158535
Features
- Width : 1.0mm 1.5mm 2.0mm 2.5mm 3.0mm 3.5mm 4.0mm.
- Feature : Anti-oxidation,anti-corrosion.
- Function : Used to remove excess solder.
- Made of high-quality materials.
- It is non-toxic, tasteless and very safe to use.
- See more on Amazon...
Function : Used To Remove Excess Solder..
It Is Non-Toxic, Tasteless And Very Safe To Use..
Made Of High-Quality Materials..
Feature : Anti-Oxidation,Anti-Corrosion..
Brand: caihongwei | Manufacturer: caihongwei
See On Amazon #22
Tech Spray No-Clean Desoldering Braid Advanced Braid Design
Asin: B0CT5SFPSL
Width: 0.098".
Length: 5 Feet.
Brand: Tech Spray | Manufacturer: Tech Spray
Dimensions: 0.50 x 1.50 x 0.50 Inches
See On Amazon #23
EVERMARKET(TM) Desoldering Wick, solder braid with 2.5mm Width, 1.5m Length and Solder Sucker Desoldering Vacuum Pump Solder Removal Tool - Blue
Asin: B01N1EZNVF | Model: i025 | PartNumber: i025 | Ean: 0014286208562 | UPC: 014286208562
Features
- High quality desoldering braid with unique no clean flux and gemetrically- precise weave
- Pure oxygen free copper wire with 0.1W x 5'L, weight 0.4oz
- Excellent thermal transfer for faster, safer desoldering using lower temperature irons
- High Quality Solder Sucker & Light Material: Super high pressure vacuum with aluminum body frame with right size: 7-1/2 length x 3/4 diameter
- Special Design: Right or Left handed design allows easy one-handed use
- See more on Amazon...
Excellent Thermal Transfer For Faster, Safer Desoldering Using Lower Temperature Irons.
Special Design: Right Or Left Handed Design Allows Easy One-Handed Use.
High Quality Solder Sucker & Light Material: Super High Pressure Vacuum With Aluminum Body Frame With Right Size: 7-1/2" Length X 3/4" Diameter.
Pure Oxygen Free Copper Wire With 0.1"W X 5'L, Weight 0.4Oz.
Brand: EVERMARKET | Manufacturer: EVERMARKET
See On Amazon #24
Lesnow solder wick Braid 3mm/0.12" Width 10' Length, No-Clean Desoldering Wick Braid Remover tool, Soldering Wick Disassemble Electrical Components,copper desolder wick Braid
Asin: B09XV2PSXD | Model: Lesnow-DW3030 | PartNumber: Lesnow-DW3030 | Ean: 0689713671976 | UPC: 689713671976
Features
- The braided solder wicks are suitable for labs, home and industry welding work,can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more
- This desoldering wick has geometrically-precise weave with copper wires with nice quality, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area.
- 1 pieces of no-clean solder wicks, each wick is about 10ft long and 0.12 inch in width, enough quantity and length for your daily needs
- If you are using the solder wick for the first time, it is recommended to use a multi-point flux to assist in cleaning At the same time, in order to prevent burns, do not directly touch the solder core at close range during use.
- If for any reason you are not satisfied with lesnow solder cores, we support you with a full refund. If you have any questions about the use of the product or the product is damaged, please contact us and our engineers will solve the problem for you as soon as possible.
- See more on Amazon...
🌟1 Pieces Of No-Clean Solder Wicks, Each Wick Is About 10Ft Long And 0.12 Inch In Width, Enough Quantity And Length For Your Daily Needs.
🌟 If For Any Reason You Are Not Satisfied With Lesnow Solder Cores, We Support You With A Full Refund. If You Have Any Questions About The Use Of The Product Or The Product Is Damaged, Please Contact Us And Our Engineers Will Solve The Problem For You As Soon As Possible..
🌟If You Are Using The Solder Wick For The First Time, It Is Recommended To Use A Multi-Point Flux To Assist In Cleaning，At The Same Time, In Order To Prevent Burns, Do Not Directly Touch The Solder Core At Close Range During Use..
🌟This Desoldering Wick Has Geometrically-Precise Weave With Copper Wires With Nice Quality, Work From The Tip Of The Desoldering Wick, Once The Desoldering Wick And The Solder Has Been Heated, The Solder Braid Can Quickly Absorbed Molten Solder And Left A Clean Working Area..
Brand: Lesnow | Manufacturer: Lesnow-DW
Dimensions: 0.50 x 2.00 x 2.00 inches
See On Amazon #25
Chemtronics 80-3-10 Soder-Wick Rosin SD Desoldering Braid
Asin: B01I7Q22I6 | Model: 80-3-10-CHEMTRONICS | PartNumber: 80-3-10-CHEMTRONICS | Ean: 0325990329642, 0747501575629 | UPC: 325990329642, 747501575629
Features
- Product type :MECHANICAL COMPONENTS
- Package dimensions :16.51 cm L x8.89 cm W x1.016 cm H
- country of origin :United States
- package weight :0.4oz
- See more on Amazon...
Country Of Origin :United States.
Package Weight :0.4Oz.
Package Dimensions :16.51 Cm L X8.89 Cm W X1.016 Cm H.
Brand: Chemtronics | Manufacturer: CHEMTRONICS
Dimensions: 0.16 x 1.00 x 1.00 Inches | Weight: 0.06 Pounds
See On Amazon #26
VOTCT Solder Wick Braid No-Clean Desoldering Wick soldering Wire Roll Width 0.1in,Length 10Ft
Asin: B0C5C6XYMH | Model: SWA30 | PartNumber: SWA30
Features
- Our solder wick is a wire braided strip that absorbs molten solder by capillary action,it's used to absorb excess solder when removing tin,it's resistant to oxidation and corrosion
- Desoldering wick has good tin conductivity and clean tin absorption,remove the welding spot of the main board and use it with soldering station
- No-clean solder wicks, wick size is 10ft long and 0.1 inch width, it can be used for relatively large patch components and left a clean working area
- This braided solder wire are suitable for labs, home and industry soldering work, practical tool to desolder and correct errors on PCB circuit boards,low residue,getting tin fast,sucking tin fast
- To prevent from getting burned, do not touch the solder wire directly during using,use plier or other tool to pick it up,if you encounter problems during using, please feel free to contact us
- See more on Amazon...
No-Clean Solder Wicks, Wick Size Is 10Ft Long And 0.1 Inch Width, It Can Be Used For Relatively Large Patch Components And Left A Clean Working Area.
To Prevent From Getting Burned, Do Not Touch The Solder Wire Directly During Using,Use Plier Or Other Tool To Pick It Up,If You Encounter Problems During Using, Please Feel Free To Contact Us.
This Braided Solder Wire Are Suitable For Labs, Home And Industry Soldering Work, Practical Tool To Desolder And Correct Errors On Pcb Circuit Boards,Low Residue,Getting Tin Fast,Sucking Tin Fast.
Desoldering Wick Has Good Tin Conductivity And Clean Tin Absorption,Remove The Welding Spot Of The Main Board And Use It With Soldering Station.
Brand: VOTCT | Manufacturer: VOTCT
See On Amazon #27
MG Chemicals - 425 Desoldering Braid #3 Fine Braid Super Wick with RMA Flux, 5' Length x 0.075" Width, Green
Asin: B008O9VX6O | Model: 425 | PartNumber: 425 | Ean: 0779008425008 | UPC: 779008425008
Features
- Oxide-free clean copper
- Static free bobbins
- Only pure type 'RMA' rosin is used meeting the requirements of MIL-F-14256F (ANSI/J-STD-0004)
- Manufactured under SPC guidelines
- Designed to leave a residue that is environmentally safe
- See more on Amazon...
Only Pure Type 'Rma' Rosin Is Used Meeting The Requirements Of Mil-F-14256F (Ansi/J-Std-0004).
Designed To Leave A Residue That Is Environmentally Safe.
Manufactured Under Spc Guidelines.
Static Free Bobbins.
Brand: MG Chemicals | Manufacturer: MG Chemicals
Dimensions: 1.00 x 1.75 x 1.75 Inches | Weight: 0.04 Pounds
Warranty: warranty@mgchemicals.com
See On Amazon #28
BEEYUIHF Desoldering Wick Braid 30M - 98ft Length 2.5mm Width Solder Wick Braid with Flux, Cable Remover Tool Solder Sucker W 0.10'' L 98'
Asin: B0CPTTFS5D | Model: US-RX25300 | PartNumber: US-RX25300
Features
- BEEYUIHF Desoldering wick with flux Size: W 0.10'' L 98'; width: 2.5mm, Length: 30M - 98ft - Large Size Desoldering Braid
- Solder Remover wire Materials The tin suction line is woven with flat needles, soft design,fast heat conduction, suitable for rapid tin suction, not only improving work efficiency and quality, but also more clean.The Braided Desoldering wicks are made of 100% copper wires with a fine braid design.
- Desoldering wick advantage: Refined chemical formula, resistant to oxidation and corrosion,clean tin absorption.Fast heat conduction, suitable for various electronic PCB circuit boards.
- The desoldering wicks Feature: Oxidation resistivity and anti-corrosion protection,good thermal conductivity. Speed up the speed of absorbing tin and low residue of flux. Increase the speed of cleaning the PCB pad.
- Wide range of use:The braided solder wick is suitable for studio, laboratory, school, home, professional repair, DIY hobbyist and industrial soldering work; and the wick is designed with fine weave, Increase the speed of cleaning the PCB pad. Bring convenience to your welding work.
- See more on Amazon...
Desoldering Wick Advantage: Refined Chemical Formula, Resistant To Oxidation And Corrosion,Clean Tin Absorption.Fast Heat Conduction, Suitable For Various Electronic Pcb Circuit Boards..
Wide Range Of Use:The Braided Solder Wick Is Suitable For Studio, Laboratory, School, Home, Professional Repair, Diy Hobbyist And Industrial Soldering Work; And The Wick Is Designed With Fine Weave, Increase The Speed Of Cleaning The Pcb Pad. Bring Convenience To Your Welding Work..
The Desoldering Wicks Feature: Oxidation Resistivity And Anti-Corrosion Protection,Good Thermal Conductivity. Speed Up The Speed Of Absorbing Tin And Low Residue Of Flux. Increase The Speed Of Cleaning The Pcb Pad..
Solder Remover Wire Materials：The Tin Suction Line Is Woven With Flat Needles, Soft Design,Fast Heat Conduction, Suitable For Rapid Tin Suction, Not Only Improving Work Efficiency And Quality, But Also More Clean.The Braided Desoldering Wicks Are Made Of 100% Copper Wires With A Fine Braid Design..
Brand: BEEYUIHF | Manufacturer: BEEYUIHF
Dimensions: 1.00 x 2.30 x 2.30 Inches | Weight: 0.20 pounds
See On Amazon #29
MOGAOPI Solder Wick and Desoldering Pump, Spare nozzle, Solder Sucker & Desoldering Wick,1pcs Solder Braid Desoldering Vacuum Pump Solder Remover Tool
Asin: B08QW6HVX2 | Model: DP-01 | PartNumber: DP-01 | Ean: 0767583529211 | UPC: 767583529211
Features
- ( 4-in-1 Solder Removal Tool ) 1pcs desoldering vacuum pumps ,1pcs Spare nozzle ,1pcs solder wicks and 1pcs High Temperature Resistance Silicone Protective Tube(15cm Length), a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts.
- ( One-handed solder sucker with powerful suction ) you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and vacuum button, which make the sucking power awesome.
- ( Desoldering Wick with copper braid ) 1pcs solder braid with the size 2.5mm Width, 1.5m Length, this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area.
- ( ABS body with non-slip sponge and Nylon nozzle desoldering pump ) The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold, the nylon nozzle of the solder suck can endure high temperature, thus it can be used for a long time.
- ( Widely used Solder Remover ) The Desoldering Wick & Desoldering Pump can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more.
- See more on Amazon...
( Desoldering Wick With Copper Braid ) 1Pcs Solder Braid With The Size 2.5Mm Width, 1.5M Length, This Desoldering Wick Has Geometrically-Precise Weave With Copper And Rosin, Work From The Tip Of The Desoldering Wick, Once The Desoldering Wick And The Solder Has Been Heated, The Solder Braid Can Quickly Absorbed Molten Solder And Left A Clean Working Area..
( Widely Used Solder Remover ) The Desoldering Wick & Desoldering Pump Can Be Used To Correct Mistakes With Small Boards On Pcbs, Remove Relays And Other Components From Printed Circuit Boards, Re-Solder Mechanical Keyboard Switches, Unsoldering Old Wire From Devices, Desoldering Computer Parts Such As A Motherboard,Clean Alloy On Smd Components And More..
( Abs Body With Non-Slip Sponge And Nylon Nozzle Desoldering Pump ) The Body Of The Desoldering Vacuum Pump Is Made Of High Quality Abs, Which Make The Solder Sucker Delicate And Durable, Also The Covered Sponge Can Absorb Sweat And Heat, Make It Comfortable To Hold, The Nylon Nozzle Of The Solder Suck Can Endure High Temperature, Thus It Can Be Used For A Long Time..
( One-Handed Solder Sucker With Powerful Suction ) You Can Using The Desoldering Pump By Just Cocking It And Pressing The Trigger Button With One Hand When You Are Ready, The Desoldering Pump Designed With Double Ring Double Open And "Vacuum" Button, Which Make The Sucking Power Awesome..
Brand: MOGAOPI | Manufacturer: MOGAOPI
Dimensions: 0.79 x 8.27 x 0.79 Inches | Weight: 0.19 pounds
See On Amazon #30
MG Chemicals - 423 Desoldering Braid #1 Fine Braid Super Wick with RMA Flux, 5' Length x 0.025" Width , White
Asin: B008O9W2FA | Model: 423 | PartNumber: 423 | Ean: 0779008423004 | UPC: 779008423004
Features
- Oxide-free clean copper
- Static free bobbins
- Only pure type 'RMA' rosin is used meeting the requirements of MIL-F-14256F (ANSI/J-STD-0004)
- Manufactured under SPC guidelines
- Designed to leave a residue that is environmentally safe
- See more on Amazon...
Only Pure Type 'Rma' Rosin Is Used Meeting The Requirements Of Mil-F-14256F (Ansi/J-Std-0004).
Designed To Leave A Residue That Is Environmentally Safe.
Manufactured Under Spc Guidelines.
Static Free Bobbins.
Brand: MG Chemicals | Manufacturer: MG Chemicals
Dimensions: 0.40 x 6.30 x 3.40 Inches | Weight: 0.02 Pounds
See On Amazon
Looking For Something Else?
Search