Best Drill Mills - Buying Guide
Last Updated: 04/27/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
JET JMD-18 Mill/Drill Machine with R-8 Taper, 1Ph 115/230V (350018)
Asin: B000051WSL | Model: 350018 | PartNumber: 350018 | Ean: 0662755103902 | UPC: 662755103902
Features
- One-piece cast iron column for added support
- 360 head swivel
- Positive quick-stop knob and easy to read internal depth gauge
- Forward and reverse switch
- Drill press angle vise
- 1/2 drill chuck, chuck arbor
- Backed by JET's industry-leading two-year warranty against manufacturing defects
- See more on Amazon...
Positive Quick-Stop Knob And Easy To Read Internal Depth Gauge.
Backed By Jet's Industry-Leading Two-Year Warranty Against Manufacturing Defects.
Drill Press Angle Vise.
1/2" Drill Chuck, Chuck Arbor.
Forward And Reverse Switch.
360° Head Swivel.
Brand: Jet | Manufacturer: JET
Dimensions: 43.50 x 42.50 x 39.75 Inches | Weight: 660.00 Pounds
Warranty: 2 Year
See On Amazon #2
AUTOTOOLHOME 1/8" 3/16" 1/4" 5/16" 3/8" 1/2" high Speed Steel HSS 4 Flute Straight End Mill Cutter 5/32" 1/16" Set of 8
Asin: B00ZZYJU2U | Model: ZH0095 | PartNumber: ZH0095 | Ean: 0714046583938, 7535001224085, 7131405354252, 5899406287932, 0798154046462 | UPC: 798154046462, 714046583938
Features
- Product Name : End Mill;Material : HSS
- Color : Gray;Cutting Diameter : 1/8 3/16 1/4 5/16 3/8 1/2 5/32 1/16
- Suit for: Hardness of metal for above 30 degrees,with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications.
- End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc.
- The bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency.
- See more on Amazon...
Suit For: Hardness Of Metal For Above 30 Degrees,With High Bending Resistance And Abrasion Resistance, Exclusive To High Hardness, High Speed Cutting Applications..
The Bottom Of End Mill Bits Is U-Shaped Groove Design, Large Front Angle Effectively Reduces Cutting Resistance, Sharp And Durable, Convenient For Chip Removal, Further Improve Machining Efficiency..
End Mill Bits Are Suitable For Side Milling, End Milling, Finish Machining, Etc. Apply To Carbon Steel, Soft Alloy Steel, Die Steel, Tool Steel, Cast Iron, Titanium, Aluminum, Etc..
Color : Gray;Cutting Diameter : 1/8" 3/16" 1/4" 5/16" 3/8" 1/2" 5/32" 1/16".
Brand: AUTOTOOLHOME | Manufacturer: JYC International Trade Co., Ltd.
Weight: 0.42 pounds
See On Amazon #3
Anytime Tools 5 Center Drill Countersink Lathe Bit Mill Tooling Set
Asin: B000N216SU | Model: AT200536 | PartNumber: AT200536 | Ean: 0810823010861 | UPC: 810823010861
Features
- Top Quality M2 HSS
- Drill accurate center holes in material prior to turning, or use as a starter bit for accurate holes
- Sizes 1, 2, 3, 4 and 5, 60 tip angles.
- See more on Amazon...
Sizes 1, 2, 3, 4 And 5, 60° Tip Angles..
Drill Accurate Center Holes In Material Prior To Turning, Or Use As A Starter Bit For Accurate Holes.
Brand: Anytime Tools | Manufacturer: Anytime Tools
See On Amazon #4
ASNOMY 10pcs 4-Flute End Mill Set, Metric CNC Milling Cutter Drill Bits Router Bits Cutter Tool Set for Wood Aluminum Steel Titanium, Straight Shank 2-12mm
Asin: B089VWBZY2 | Model: AS0087 | PartNumber: AS0087 | Ean: 0747045238394 | UPC: 747045238394
Features
- Top Quality Made from high speed steel(HSS), high abrasion resistance, obtain accuracy, high-speed cutting for the high hardness
- 2-12mm End Mill Set: This end mill set includes 10 diameter sizes of 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 12mm, can satisfy all your different needs.
- Widely Application CNC End Mill: Can Used on metal processing, CNC machining and engineering using, Suitable for aluminium, cast iron, copper, magnesium alioy, plastics, wood, etc
- Easy To Use: This End Mill Bits usually used to be assembled on milling machine and used for profiling, shoulder milling, finishing operations, general purpose machining of both ferrous and nonferrous materials
- Satisfaction: ASNOMY aims to provide high-grade products and customer service to all customers. Any problems, just contact us and our after-sale team will solve your problems ASAP.
- See more on Amazon...
Widely Application Cnc End Mill: Can Used On Metal Processing, Cnc Machining And Engineering Using, Suitable For Aluminium, Cast Iron, Copper, Magnesium Alioy, Plastics, Wood, Etc.
Satisfaction: Asnomy Aims To Provide High-Grade Products And Customer Service To All Customers. Any Problems, Just Contact Us And Our After-Sale Team Will Solve Your Problems Asap..
Easy To Use: This End Mill Bits Usually Used To Be Assembled On Milling Machine And Used For Profiling, Shoulder Milling, Finishing Operations, General Purpose Machining Of Both Ferrous And Nonferrous Materials.
2-12Mm End Mill Set: This End Mill Set Includes 10 Diameter Sizes Of 2Mm, 3Mm, 4Mm, 5Mm, 6Mm, 7Mm, 8Mm, 9Mm, 10Mm, 12Mm, Can Satisfy All Your Different Needs..
Brand: ASNOMY | Manufacturer: ASNOMY
See On Amazon #5
High Performance 2Pcs 1/4" 4-Flute 90 Degree Solid Carbide Drill Mill - AlTiN Coated, 90 Included Angle, 4 Flute, 1/4" Cutting diameter, 1/4" Shank diameter, 3/4" Length of Cut, 2-1/2" Overall Length
Asin: B0CQG93JXR
Features
- Set includes: 2pcs 1/4" 4 Flute 90 Degree Solid Carbide Drill Mills.
- Size: 1/4 cutting diameter x 1/4 shank diameter x 3/4 length of cut x 2-1/2 overall length, 4 Flute, Solid Carbide Drill Mill, 90 Included Angle, AlTiN Coated.
- Coated: AlTiN Coated for improved performance and tool life in harder materials or high temperature applications.
- Material: Solid carbide tools offer long tool life and faster cutting speeds than other substrates, Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
- Features: Precision ground using the highest quality grinding wheels. High strength and hardness, abrasion resistant, practical, easy to use and durable in use.
- Application: Used for general purpose milling in most materials of medium hardness such as steel, brass, iron, and nonferrous materials.
- See more on Amazon...
Coated: Altin Coated For Improved Performance And Tool Life In Harder Materials Or High Temperature Applications..
Features: Precision Ground Using The Highest Quality Grinding Wheels. High Strength And Hardness, Abrasion Resistant, Practical, Easy To Use And Durable In Use..
Application: Used For General Purpose Milling In Most Materials Of Medium Hardness Such As Steel, Brass, Iron, And Nonferrous Materials..
Material: Solid Carbide Tools Offer Long Tool Life And Faster Cutting Speeds Than Other Substrates, Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures..
Size: 1/4" Cutting Diameter X 1/4" Shank Diameter X 3/4" Length Of Cut X 2-1/2" Overall Length, 4 Flute, Solid Carbide Drill Mill, 90° Included Angle, Altin Coated..
Brand: BestParts | Manufacturer: BestParts
See On Amazon #6
Grizzly Industrial G0758-6" x 20" 3/4 HP Mill/Drill
Asin: B07KK1SBDD | Model: G0758 | PartNumber: G0758 | Ean: 0690550525537 | UPC: 690550525537
Features
- Motor: 600W (3/4 HP), DC, 110V, 10A
- Spindle taper: R-8
- Spindle travel: 2
- Swing: 13-1/4
- Max. distance spindle-to-table: 8-3/4
- See more on Amazon...
Spindle Travel: 2".
Max. Distance Spindle-To-Table: 8-3/4".
Swing: 13-1/4".
Spindle Taper: R-8.
Brand: Grizzly Industrial | Manufacturer: Grizzly
Dimensions: 30.25 x 19.75 x 21.00 Inches
See On Amazon #7
HiTorque Mini Mill with R8 Spindle and Drill Chuck - Power, Torque, and a larger table than other mills in its class, LittleMachineShop.com (3990)
Asin: B07KCPSVXV | Model: LMS3990 | PartNumber: LMS3990 | Ean: 0736530758592 | UPC: 736530758592
Brand: LittleMachineShop.com | Manufacturer: LittleMachineShop.com
Dimensions: 36.30 x 19.70 x 23.20 Inches | Weight: 124.00 Pounds
See On Amazon #8
BestParts High Performance 1/2" 4-Flute 90 Degree Solid Carbide Drill Mill - AlTiN Coated, 90 Included Angle, 4 Flute, 1/2" Cutting Diameter, 1/2" Shank Diameter, 1" Length of Cut, 3" Overall Length
Asin: B0CQXRWVVC
Features
- Set includes: 1Pc 1/2" 4 Flute 90 Degree Solid Carbide Drill Mill.
- Size: 1/2 cutting diameter x 1/2 shank diameter x 1 length of cut x 3 overall length, 4 Flute, Solid Carbide Drill Mill, 90 Included Angle, AlTiN Coated.
- Coated: AlTiN Coated for improved performance and tool life in harder materials or high temperature applications.
- Material: Solid carbide tools offer long tool life and faster cutting speeds than other substrates, Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
- Features: Precision ground using the highest quality grinding wheels. High strength and hardness, abrasion resistant, practical, easy to use and durable in use.
- Application: Used for general purpose milling in most materials of medium hardness such as steel, brass, iron, and nonferrous materials.
- See more on Amazon...
Coated: Altin Coated For Improved Performance And Tool Life In Harder Materials Or High Temperature Applications..
Features: Precision Ground Using The Highest Quality Grinding Wheels. High Strength And Hardness, Abrasion Resistant, Practical, Easy To Use And Durable In Use..
Application: Used For General Purpose Milling In Most Materials Of Medium Hardness Such As Steel, Brass, Iron, And Nonferrous Materials..
Material: Solid Carbide Tools Offer Long Tool Life And Faster Cutting Speeds Than Other Substrates, Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures..
Size: 1/2" Cutting Diameter X 1/2" Shank Diameter X 1" Length Of Cut X 3" Overall Length, 4 Flute, Solid Carbide Drill Mill, 90° Included Angle, Altin Coated..
Brand: BestParts | Manufacturer: BestParts
See On Amazon #9
JET 15-Inch Mill/Drill Machine with R-8 Taper, 1 HP, 1Ph 115/230V (Model JMD-15)
Asin: B0009H5TA0 | Model: JMD-15 | PartNumber: JMD-15 | Ean: 0410050000873, 0662755103896 | UPC: 410050000873, 662755103896
Features
- One-piece cast iron column for added support
- 360 head swivel
- Positive quick-stop knob and easy to read internal depth gauge
- Drill press angle vise
- 1/2 drill chuck, chuck arbor
- Backed by JET's industry-leading two-year warranty against manufacturing defects
- See more on Amazon...
Positive Quick-Stop Knob And Easy To Read Internal Depth Gauge.
1/2" Drill Chuck, Chuck Arbor.
Backed By Jet's Industry-Leading Two-Year Warranty Against Manufacturing Defects.
Drill Press Angle Vise.
360° Head Swivel.
Brand: Jet | Manufacturer: WMH Tool Group
Dimensions: 29.00 x 42.75 x 28.00 inches | Weight: 440.00 pounds
Warranty: 2 Year
See On Amazon #10
INTSUPERMAI Vertical Milling Drilling Machine7"X27" Mini Mill Drill Machine R8 Spindle Taper Set with Axis X Power Feed and Three - axis Grating Ruler 20-2250rpm Variable Speed 110V
Asin: B0C64LJ5FJ | Model: S056765 | PartNumber: S056765 | Ean: 0760714623833 | UPC: 760714623833
Features
- Milling and Drilling Machine Parameter : With Metric Scale.Spindle taper:R8-ER32(milling chuck accessories),Distance from spindle to table:,X axis stroke:18.9"(480mm),Y axis stroke:6.9",Z axis stroke:11,Table size:27.2"*7.1"(690mm*180mm).The operation is more conwenient.Forward and reverse switch and with emergency stop switch, which is more safe.
- Milling and Drilling Machine Parameter : With Metric Scale.Spindle taper:R8-ER32(milling chuck accessories),Distance from spindle to table:,X axis stroke:18.9(480mm),Y axis stroke:6.9,Z axis stroke:11,Table size:27.2*7.1(690mm*180mm).The operation is more conwenient.Forward and reverse switch and with emergency stop switch, which is more safe.
- Removable Milling Chuck :RCOG-25V comes with a set of removable milling chuck, which is convenient for clamping objects, while giving a set of MT3-ER32 milling chuck accessories, without additional purchase.
- Removable Milling Chuck :RCOG-25V comes with a set of removable milling chuck, which is convenient for clamping objects, while giving a set of MT3-ER32 milling chuck accessories, without additional purchase.
- Scale : Integrated cross worktable, width is widened, with high precision positioning adjustment scale, which can be moved from front to back, left and right, spray paint at the bottom, which is durable. Can complete drilling and milling operations. Also can be used for precision parts processing, sample processing and model.Benchtop metal lathe use all metal gears, metal shell, metal hand wheel without any plastic parts.
- See more on Amazon...
【Removable Milling Chuck】:Rcog-25V Comes With A Set Of Removable Milling Chuck, Which Is Convenient For Clamping Objects, While Giving A Set Of Mt3-Er32 Milling Chuck Accessories, Without Additional Purchase..
【Scale】: Integrated Cross Worktable, Width Is Widened, With High Precision Positioning Adjustment Scale, Which Can Be Moved From Front To Back, Left And Right, Spray Paint At The Bottom, Which Is Durable. Can Complete Drilling And Milling Operations. Also Can Be Used For Precision Parts Processing, Sample Processing And Model.Benchtop Metal Lathe Use All Metal Gears, Metal Shell, Metal Hand Wheel Without Any Plastic Parts..
【Removable Milling Chuck】:Rcog-25V Comes With A Set Of Removable Milling Chuck, Which Is Convenient For Clamping Objects, While Giving A Set Of Mt3-Er32 Milling Chuck Accessories, Without Additional Purchase..
【Milling And Drilling Machine Parameter】: With Metric Scale.Spindle Taper:R8-Er32(Milling Chuck Accessories),Distance From Spindle To Table:,X Axis Stroke:18.9"(480Mm),Y Axis Stroke:6.9",Z Axis Stroke:11,Table Size:27.2"*7.1"(690Mm*180Mm).The Operation Is More Conwenient.Forward And Reverse Switch And With Emergency Stop Switch, Which Is More Safe..
Brand: INTSUPERMAI | Manufacturer: INTSUPERMAI
Dimensions: 63.00 x 43.10 x 23.20 Inches | Weight: 294.00 Pounds
See On Amazon #11
INTBUYING Mini Milling Drilling Machine R8 Mill Drill Machine Precision Metal Milling Drilling Machine 1100W 50-2250RPM DRO with X Power Feed/3-axis Grating Ruler/Bench Clamp RCOG-25V with Stand 110V
Asin: B0C64S2WN9 | Model: RCOG-25V | PartNumber: RCOG-25V | Ean: 0760714623826 | UPC: 760714623826
Features
- Equipped with three-axis grating rulers,this metal milling machine offers numerous functions that enhance operational efficiency and precision.Features include zero clear,preset settings,dual inch/metric display,relative/absolute switch,automatic sub-centers,calculator,power failure memory,and RI (Rapid Inspection) capabilities.
- Axis X is equipped with a power feed system that enables both forward and reverse reversing, as well as stepless speed regulation.This results in more stable operation with less noise, significantly enhancing machining precision and efficiency.
- Equipped with a high-quality brushless motor that delivers up to 1100W of power.This advanced motor includes essential protection features such as overload and overheating safeguards,ensuring the machine's reliability and longevity.The brushless motor and belt drive mechanism work in harmony to minimize noise levels during operation,creating a quieter working environment and reducing disturbance.
- This precision mill drill machine excels in adaptability with its variable speed capabilities. It features a broad RPM range from 50 to 2250, allowing users to precisely adjust the spindle speed to suit their specific project requirements,whether high-speed or low-speed operations are needed.
- Featuring a tilting head that rotates up to 90 in either direction, this machine allows for exceptional versatility when drilling and milling at special angles. Simply loosen the fixing screws, and you have quick and easy access to a wide range of angled operations.
- - Durability and accuracy are paramount with the mini milling drilling machine.It utilizes an integrated spindle and brass gears, providing a robust, all-metal design that promises longevity and maintains precision throughout its lifespan.
- - The milling lathe has a R8 metric thread,making it suitable for both industrial and hobby use.It comes with a set of high precision R8-ER32 milling chucks,eliminating the need for additional purchases.The chucks come in various sizes:4-3/5-4/6-5/8-7/10-9/12-11/14-13/16-15 to meet different needs.IF YOU NEED ANY PARTS,PLEASE SEND AMAZON MESSAGE TO US.
- The RCOG-25V multi-functional drilling and milling machine is designed to efficiently handle both drilling and milling operations. It caters to precision parts processing, sample machining, and modeling needs, making it an essential tool for a wide range of applications in metal,wood,plastic,and more.
- See more on Amazon...
🧰【𝟏𝟏𝟎𝟎𝐖 𝐁𝐫𝐮𝐬𝐡𝐥𝐞𝐬𝐬 𝐌𝐨𝐭𝐨𝐫】Equipped With A High-Quality Brushless Motor That Delivers Up To 1100W Of Power.This Advanced Motor Includes Essential Protection Features Such As Overload And Overheating Safeguards,Ensuring The Machine's Reliability And Longevity.The Brushless Motor And Belt Drive Mechanism Work In Harmony To Minimize Noise Levels During Operation,Creating A Quieter Working Environment And Reducing Disturbance..
🧰【𝐖𝐢𝐭𝐡 𝐑𝟖-𝐄𝐑𝟑𝟐 𝐃𝐫𝐢𝐥𝐥 𝐂𝐡𝐮𝐜𝐤𝐬】The Milling Lathe Has A R8 Metric Thread,Making It Suitable For Both Industrial And Hobby Use.It Comes With A Set Of High Precision R8-Er32 Milling Chucks,Eliminating The Need For Additional Purchases.The Chucks Come In Various Sizes:4-3/5-4/6-5/8-7/10-9/12-11/14-13/16-15 To Meet Different Needs.If You Need Any Parts,Please Send Amazon Message To Us..
🧰【𝐕𝐞𝐫𝐬𝐚𝐭𝐢𝐥𝐞 𝐅𝐮𝐧𝐜𝐭𝐢𝐨𝐧𝐚𝐥𝐢𝐭𝐲】The Rcog-25V Multi-Functional Drilling And Milling Machine Is Designed To Efficiently Handle Both Drilling And Milling Operations. It Caters To Precision Parts Processing, Sample Machining, And Modeling Needs, Making It An Essential Tool For A Wide Range Of Applications In Metal,Wood,Plastic,And More..
🧰【±𝟗𝟎° 𝐓𝐢𝐥𝐭 𝐅𝐮𝐧𝐜𝐭𝐢𝐨𝐧𝐚𝐥𝐢𝐭𝐲】Featuring A Tilting Head That Rotates Up To 90° In Either Direction, This Machine Allows For Exceptional Versatility When Drilling And Milling At Special Angles. Simply Loosen The Fixing Screws, And You Have Quick And Easy Access To A Wide Range Of Angled Operations..
🧰【𝐀𝐥𝐥-𝐌𝐞𝐭𝐚𝐥 𝐂𝐨𝐧𝐬𝐭𝐫𝐮𝐜𝐭𝐢𝐨𝐧】Durability And Accuracy Are Paramount With The Mini Milling Drilling Machine.It Utilizes An Integrated Spindle And Brass Gears, Providing A Robust, All-Metal Design That Promises Longevity And Maintains Precision Throughout Its Lifespan..
🧰【𝐕𝐚𝐫𝐢𝐚𝐛𝐥𝐞 𝐒𝐩𝐞𝐞𝐝 𝐂𝐨𝐧𝐭𝐫𝐨𝐥】This Precision Mill Drill Machine Excels In Adaptability With Its Variable Speed Capabilities. It Features A Broad Rpm Range From 50 To 2250, Allowing Users To Precisely Adjust The Spindle Speed To Suit Their Specific Project Requirements,Whether High-Speed Or Low-Speed Operations Are Needed..
🧰【𝐖𝐢𝐭𝐡 𝐏𝐨𝐰𝐞𝐫 𝐅𝐞𝐞𝐝】Axis X Is Equipped With A Power Feed System That Enables Both Forward And Reverse Reversing, As Well As Stepless Speed Regulation.This Results In More Stable Operation With Less Noise, Significantly Enhancing Machining Precision And Efficiency..
Brand: INTBUYING | Manufacturer: INTBUYING
Dimensions: 63.00 x 43.10 x 23.20 Inches | Weight: 400.00 pounds
See On Amazon #12
WEN 33013 4.5A Variable Speed Single Phase Compact Benchtop Milling Machine with R8 Taper
Asin: B07FCQ859M | Model: 33013 | PartNumber: 33013 | Ean: 0044459330134 | UPC: 044459330134
Features
- Variable speed goes anywhere from 100 to 1,100 RPM on the low setting and 100 to 2,500 RPM on the high setting
- 18-1/8 x 4-3/4 inch table travels 11-13/16 inches along the X-axis and 5-1/8 inches along the Y-axis
- Bevel the head and column 45 degrees in either direction for angled cuts in metal, wood, plastic and more
- Compact cast iron design measures in at 23-1/4 by 22 by 29-1/2 inches in size with an 8-1/2 by 15 inch foot print
- Includes an R8 spindle taper, a pre-installed drill chuck (1/32 to 1/2 inch), fine-tune adjustment hand wheels, a transparent chuck guard, an emergency stop button, onboard measurement indicators, a 13-inch swing, two M10-1.5 T-nuts, 12mm T-slots, and a two-year warranty
- See more on Amazon...
Bevel The Head And Column 45 Degrees In Either Direction For Angled Cuts In Metal, Wood, Plastic And More.
Includes An R8 Spindle Taper, A Pre-Installed Drill Chuck (1/32 To 1/2 Inch), Fine-Tune Adjustment Hand Wheels, A Transparent Chuck Guard, An Emergency Stop Button, Onboard Measurement Indicators, A 13-Inch Swing, Two M10-1.5 T-Nuts, 12Mm T-Slots, And A Two-Year Warranty.
Compact Cast Iron Design Measures In At 23-1/4 By 22 By 29-1/2 Inches In Size With An 8-1/2 By 15 Inch Foot Print.
18-1/8 X 4-3/4 Inch Table Travels 11-13/16 Inches Along The X-Axis And 5-1/8 Inches Along The Y-Axis.
Brand: WEN | Manufacturer: WEN
Dimensions: 29.50 x 23.25 x 22.00 Inches | Weight: 130.10 Pounds
See On Amazon #13
10 pcs Solid Carbide Drill Mills, 1/8" Drill Diameter, TiAlN Coated, 90 Point Angle, 2 Flute, 1/2" Flute Length
Asin: B0CP2XCG37
Features
- 1/8" Cut Diameter; 1/2" Flute Length; 1-1/2" Overall Length; 1/8" Shank Diameter; 2 Flute; 90 Point Angle; 30 Helix Angle
- Versatile cutting tool capable of performing both drilling and milling processes; 90 tip angle allows these to be used for drilling, slotting, profiling, and chamfering cuts
- Harder and higher heat-resistance allows these micrograin carbide drill mills to last much longer than high-speed steel and cobalt steel drill mills; Can be run at significantly higher speeds to decrease manufacturing times
- Robust TiAlN Coated finish enhances resistances to heat and oxidation; Up to 10x longer service life
- Individually packaged in solid plastic tubes; 10 pieces per order
- See more on Amazon...
Harder And Higher Heat-Resistance Allows These Micrograin Carbide Drill Mills To Last Much Longer Than High-Speed Steel And Cobalt Steel Drill Mills; Can Be Run At Significantly Higher Speeds To Decrease Manufacturing Times.
Individually Packaged In Solid Plastic Tubes; 10 Pieces Per Order.
Robust Tialn Coated Finish Enhances Resistances To Heat And Oxidation; Up To 10X Longer Service Life.
Versatile Cutting Tool Capable Of Performing Both Drilling And Milling Processes; 90° Tip Angle Allows These To Be Used For Drilling, Slotting, Profiling, And Chamfering Cuts.
Brand: CME Tools | Manufacturer: CME Tools
See On Amazon #14
Proxxon 34104 Mill/ Drill Head PF 230, 1.38 X 15.75-Inches
Asin: B0017NS81W | Model: 34104 | PartNumber: 34104 | Ean: 4006274341043, 0767674906433 | UPC: 767674906433
Features
- Precision proxxon engineering for top quality machinery
- 110 - 120V, 60Hz, 140W (0.1877hp), speeds 280 - 550 - 870 - 1,200 - 1,500 and 2,200rpm
- The lathe functions as a compound table, with X-Y travel being longitudinal and cross-wise respectively
- Three collets of sizes 15/64 - 5/16 and 25/64 (6, 8, 10mm) are included.
- See more on Amazon...
The Lathe Functions As A Compound Table, With X-Y Travel Being Longitudinal And Cross-Wise Respectively.
Three Collets Of Sizes 15/64" - 5/16" And 25/64" (6, 8, 10Mm) Are Included..
110 - 120V, 60Hz, 140W (0.1877Hp), Speeds 280 - 550 - 870 - 1,200 - 1,500 And 2,200Rpm.
Brand: Proxxon | Manufacturer: Proxxon
Dimensions: 8.66 x 13.39 x 9.84 Inches
See On Amazon #15
Shop Fox M1116 Variable-Speed Mill/Drill with Digital Readout
Asin: B07G96KK15 | Model: M1116 | PartNumber: M1116 | UPC: 754001015241
Features
- Motor: 3/4 HP, 110V, 8A, single-phase
- Spindle taper: R8
- Spindle travel: 2
- T-slots: 3 @ 2-1/2 Centers, 7/16 Wide
- Head travel: 11
- See more on Amazon...
Spindle Travel: 2".
Head Travel: 11".
T-Slots: 3 @ 2-1/2" Centers, 7/16" Wide.
Spindle Taper: R8.
Brand: Shop Fox | Manufacturer: Woodstock International
Warranty: 2 year manufacturer
See On Amazon #16
Drill America SD-7 Carbide Burr/Rotary File Ball-End Double Cut for Die Grinder 3/4" Dia. x 11/16" Cut Length with 1/4" Shank and 2-7/16" Overall Length, DUL Series
Asin: B006KVFBJ8 | Model: DULSD7 | PartNumber: DULSD7 | Ean: 0887861118965 | UPC: 887861118965
Features
- Also called die grinder bits, rotary burrs and rotray files, these burrs are designed for cleaning out material in a wide-range of products including wood, plastics, stainless steel and other metals such as nickel, iron, steel, tool steel and titanium
- Trade number SD-7 with a Ball-End Double Cut shape
- Double-cut style has rows of cutting teeth cut in two intersecting directions for fast material removal and a rougher finish
- 3/4 Head Diameter with 11/16 Head Length and 2-7/16 Overall Length
- 1/4 round shank allow use with a wide variety of toolholding systems
- See more on Amazon...
Double-Cut Style Has Rows Of Cutting Teeth Cut In Two Intersecting Directions For Fast Material Removal And A Rougher Finish.
1/4" Round Shank Allow Use With A Wide Variety Of Toolholding Systems.
3/4" Head Diameter With 11/16" Head Length And 2-7/16" Overall Length.
Trade Number Sd-7 With A Ball-End Double Cut Shape.
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 Inches
See On Amazon #17
Shars Heavy Compound Cross Slide Mill Drill Table Hardened 202-2302 R)
Asin: B081GC8P2L | Ean: 0000220223029 | UPC: 000220223029
Features
- TABLE LENGTH: 18-1/2
- TABLE_WIDTH: 6, TABLE HEIGHT: 5
- BASE LENGTH: 10-1/2, BASE WIDTH: 8
- LONGITUDINAL TRAVEL (Y): 11, CROSS TRAVEL (X): 7.5
- T-SLOT: 5/8
- See more on Amazon...
Base Length: 10-1/2, Base Width: 8.
T-Slot: 5/8.
Longitudinal Travel (Y): 11, Cross Travel (X): 7.5.
Table_Width: 6, Table Height: 5.
Brand: Shars | Manufacturer: Shars
Dimensions: 5.00 x 18.50 x 6.00 Inches
See On Amazon #18
Melin Tool AMG-DP Carbide Drill Mill, AlTiN Monolayer Finish, 30 Deg Point Angle, 2 Flutes, 1.5" Overall Length, 0.125" Cutting Diameter, 0.125" Shank Diameter
Asin: B0081AJ93A | Model: 56083 | PartNumber: 56083 | Ean: 0733438560838 | UPC: 733438560838
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Aluminum titanium nitride is similar to TiAlN but with a higher aluminum content for improved hardness and smoothness
- Round shanks allow use with a wide variety of toolholding systems
- Can be used for drilling, slotting, chamfering, and profile milling
- Available in 90 degree points
- See more on Amazon...
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Available In 90 Degree Points.
Can Be Used For Drilling, Slotting, Chamfering, And Profile Milling.
Aluminum Titanium Nitride Is Similar To Tialn But With A Higher Aluminum Content For Improved Hardness And Smoothness.
Brand: Melin Tool | Manufacturer: Melin Tool Company
See On Amazon #19
INTBUYING Benchtop Mini Milling Drilling Machine R8 High Precision Mill Drill Machine Micro Variable Speed Power Mill Drill Press 1100W Brushless Motor Industrial Wood Metal Hobby Milling Machine 110V
Asin: B09MF2PM9H | Model: RCOG-25V | PartNumber: RCOG-25V | Ean: 0785869936454 | UPC: 785869936454
Features
- The metalworking milling machine is equipped with a 1100W brushless spindle drive motor, providing high torque and variable speeds from 50-2250 RPM continuously. It also features overload and overheating protection functions, making it suitable for processing various materials such as stainless steel,iron,aluminum,copper,wood,nylon,and other soft materials.
- The precision milling machine boasts a generous table size of 7''x27.56'' (180x700mm) with a convenient T-slot for fixture fixing. Its one-piece casting construction ensures durability, while the high precision integrated cross worktable allows for precise positioning.
- - This milling machine has micro-feed functionality,allowing for accuracy up to 0.01mm. By tightening the middle nut of the right hand wheel, the micro-feed function can be activated, while loosening the nut enables manual up and down movement.
- - Durability and accuracy are crucial for the mini milling drilling machine.It utilizes an integrated spindle and brass gears, providing a robust, all-metal design that promises longevity and maintains precision throughout its lifespan.
- Featuring a tilting head that rotates up to 90 in either direction, this machine allows for exceptional versatility when drilling and milling at special angles. Simply loosen the fixing screws, and you have quick and easy access to a wide range of angled operations.
- - The milling lathe has a R8 metric thread,making it suitable for both industrial and hobby use.It comes with a set of high precision R8-ER32 milling chucks,eliminating the need for additional purchases.The chucks come in various sizes:4-3/5-4/6-5/8-7/10-9/12-11/14-13/16-15 to meet different needs.IF YOU NEED ANY PARTS,PLEASE SEND AMAZON MESSAGE TO US.
- The RCOG-25V multi-functional drilling and milling machine is designed to efficiently handle both drilling and milling operations. It caters to precision parts processing, sample machining, and modeling needs, making it an essential tool for a wide range of applications in metal,wood,plastic,and more.
- See more on Amazon...
👉【𝐌𝐢𝐜𝐫𝐨-𝐅𝐞𝐞𝐝 𝐏𝐫𝐞𝐜𝐢𝐬𝐢𝐨𝐧】This Milling Machine Has Micro-Feed Functionality,Allowing For Accuracy Up To 0.01Mm. By Tightening The Middle Nut Of The Right Hand Wheel, The Micro-Feed Function Can Be Activated, While Loosening The Nut Enables Manual Up And Down Movement..
👉【𝐕𝐞𝐫𝐬𝐚𝐭𝐢𝐥𝐞 𝐅𝐮𝐧𝐜𝐭𝐢𝐨𝐧𝐚𝐥𝐢𝐭𝐲】The Rcog-25V Multi-Functional Drilling And Milling Machine Is Designed To Efficiently Handle Both Drilling And Milling Operations. It Caters To Precision Parts Processing, Sample Machining, And Modeling Needs, Making It An Essential Tool For A Wide Range Of Applications In Metal,Wood,Plastic,And More..
👉【±𝟗𝟎° 𝐓𝐢𝐥𝐭 𝐅𝐮𝐧𝐜𝐭𝐢𝐨𝐧𝐚𝐥𝐢𝐭𝐲】Featuring A Tilting Head That Rotates Up To 90° In Either Direction, This Machine Allows For Exceptional Versatility When Drilling And Milling At Special Angles. Simply Loosen The Fixing Screws, And You Have Quick And Easy Access To A Wide Range Of Angled Operations..
👉【𝐖𝐢𝐭𝐡 𝐑𝟖-𝐄𝐑𝟑𝟐 𝐃𝐫𝐢𝐥𝐥 𝐂𝐡𝐮𝐜𝐤𝐬】The Milling Lathe Has A R8 Metric Thread,Making It Suitable For Both Industrial And Hobby Use.It Comes With A Set Of High Precision R8-Er32 Milling Chucks,Eliminating The Need For Additional Purchases.The Chucks Come In Various Sizes:4-3/5-4/6-5/8-7/10-9/12-11/14-13/16-15 To Meet Different Needs.If You Need Any Parts,Please Send Amazon Message To Us..
👉【𝐀𝐥𝐥-𝐌𝐞𝐭𝐚𝐥 𝐂𝐨𝐧𝐬𝐭𝐫𝐮𝐜𝐭𝐢𝐨𝐧】Durability And Accuracy Are Crucial For The Mini Milling Drilling Machine.It Utilizes An Integrated Spindle And Brass Gears, Providing A Robust, All-Metal Design That Promises Longevity And Maintains Precision Throughout Its Lifespan..
👉【𝐒𝐩𝐚𝐜𝐢𝐨𝐮𝐬 𝐖𝐨𝐫𝐤 𝐒𝐮𝐫𝐟𝐚𝐜𝐞】The Precision Milling Machine Boasts A Generous Table Size Of 7''X27.56'' (180X700mm) With A Convenient T-Slot For Fixture Fixing. Its One-Piece Casting Construction Ensures Durability, While The High Precision Integrated Cross Worktable Allows For Precise Positioning..
Brand: INTBUYING | Manufacturer: INTBUYING
Dimensions: 37.80 x 37.80 x 37.80 Inches | Weight: 320.00 Pounds
Warranty: 1 year
See On Amazon #20
SHARS X Power Feed Table Milling Reversible Mill/Drill 110V 202-2207 R]
Asin: B07ZQM45KD | Model: 202-2207 | PartNumber: 202-2207 | Ean: 0000220222077 | UPC: 000220222077
Features
- Feed Type: X Axis/ Table Feed
- Peak Torque Per Pound (in): 135
- Feed Rate Per Minute (in): 0-25
- Power: 110V
- Mounting Shaft Diameter: 17mm
- See more on Amazon...
Feed Rate Per Minute (In): 0-25.
Mounting Shaft Diameter: 17Mm.
Power: 110V.
Peak Torque Per Pound (In): 135.
Brand: Shars | Manufacturer: Shars Tool
Weight: 18.00 pounds
See On Amazon #21
Grizzly Industrial G0761-10" x 32" 2 HP HD Benchtop Mill/Drill w/Power Feed & Tapping
Asin: B07JM3S92G | Model: G0761 | PartNumber: G0761 | Ean: 0690550910739 | UPC: 690550910739
Features
- Motor: 2 HP, 220V, 1-phase, 8.6A
- Swing: 20-1/4 Max. distance spindle-to-table: 18-1/8
- Table size: 9-1/2 x 31-1/2
- Table travel (X-, Y-Axis): 22, 7-1/2
- Head travel (Z-Axis): 13-3/4
- See more on Amazon...
Table Size: 9-1/2" X 31-1/2".
Head Travel (Z-Axis): 13-3/4".
Table Travel (X-, Y-Axis): 22", 7-1/2".
Swing: 20-1/4" � Max. Distance Spindle-To-Table: 18-1/8".
Brand: Grizzly Industrial | Manufacturer: Grizzly
Dimensions: 57.00 x 49.63 x 30.75 Inches
See On Amazon #22
HayWHNKN Mini Milling Machine 7X27" Drilling Machine Benchtop Mill Drill Machine Wood R8 Taper Metal Milling Drilling Machine Precision Mill/Drill Brushless Motor Variable Speed 1100W 110V
Asin: B09MFBM8NT | Model: S028334 | PartNumber: S028334 | Ean: 0785869936508 | UPC: 785869936508
Features
- The Mill Drill Machine with drilling, milling groove, plane milling chamfering and other functions, suitable for all kinds of metal, wood and other materials fine processing, widely used in machinery manufacturing,woodworking DIY and so on.
- Machine head tilt, Spindle incline Angle: 90 (The nose can actually rotate 360 degrees), Spindle taper: R8, Max. drilling diameter: 0.9(25mm), Distance from spindle to table: 13.8(350mm), Spindle stroke: 2(52mm), Table size: 27.5*7.1(700mm*180mm)
- 1100W Strong Power. The Benchtop Mill/Drill Machine with 1100W brushless motor, Infinitely Variable-Speed, The Range of spindle speeds: 50-2250rpm
- The Mill Drill Machine is equipped with high-precision milling chuck set MT3. Clamping range: 4-3, 5-4, 6-5, 8-7, 10-9,12-11,14-13,16-15. Spindle high precision feed, one piece steel handle bar, hand wheel adjustment with fine adjustment switch, high precision machining, accurate to 0.01MM.
- Widened working table: 27.5*7.1(700mm*180mm), artificial fine grinding, integrated casting, T-slot convenient fixture fixation. High quality and Durable.
- See more on Amazon...
⚒️ 1100W Strong Power. The Benchtop Mill/Drill Machine With 1100W Brushless Motor, Infinitely Variable-Speed, The Range Of Spindle Speeds: 50-2250Rpm.
⚒️ Widened Working Table: 27.5"*7.1"(700Mm*180Mm), Artificial Fine Grinding, Integrated Casting, T-Slot Convenient Fixture Fixation. High Quality And Durable..
⚒️ The Mill Drill Machine Is Equipped With High-Precision Milling Chuck Set Mt3. Clamping Range: 4-3, 5-4, 6-5, 8-7, 10-9,12-11,14-13,16-15. Spindle High Precision Feed, One Piece Steel Handle Bar, Hand Wheel Adjustment With Fine Adjustment Switch, High Precision Machining, Accurate To 0.01Mm..
⚒️ Machine Head Tilt, Spindle Incline Angle: ±90°(The Nose Can Actually Rotate 360 Degrees), Spindle Taper: R8, Max. Drilling Diameter: 0.9"(25Mm), Distance From Spindle To Table: 13.8"(350Mm), Spindle Stroke: 2"(52Mm), Table Size: 27.5"*7.1"(700Mm*180Mm).
Brand: HayWHNKN | Manufacturer: HayWHNKN
Dimensions: 37.00 x 38.00 x 23.00 Inches
See On Amazon #23
JET Cabinet Floor Stand, for JMD Series Mill Drills (CS-18)
Asin: B000051WSM | Model: CS-18 | PartNumber: CS-18 | Ean: 0662755793172, 0410050017437 | UPC: 662755793172, 410050017437
Features
- Designed to fit JET JMD Series mill drills (350017, 350018, 350020)
- Dimensions: 31-1/4 x 23-1/4 x 28
- With locking height adjustment
- Backed by JET's industry-leading 90-day warranty
- See more on Amazon...
With Locking Height Adjustment.
Backed By Jet's Industry-Leading 90-Day Warranty.
Dimensions: 31-1/4" X 23-1/4" X 28".
Brand: Jet | Manufacturer: JET
Dimensions: 29.00 x 32.00 x 26.00 Inches | Weight: 72.00 Pounds
Warranty: 90 Days
See On Amazon #24
INTBUYING MIni Milling Drilling Machine Vertical R8 Mini Benchtop Mill/Drill Machine 7"X27" 1100W 20-2250rpm Variable Speed with Grating Ruler, Axis X Power Feed, Accessory R8 Tapper Package 110V
Asin: B0C64SZTBP | Model: S056765 | PartNumber: S056765 | Ean: 0760714623918 | UPC: 760714623918
Features
- Main Parameter Voltage:AC110V/60Hz,Motor power:1100 Brushless Motor X-Y-Z axis stroke:18.9"(480mm)-18.9"(480mm)18.9"(480mm), Max. drilling diameter:0.9"(25mm), Distance from spindle to table:13.8"(350mm)
- 27.2*7.1 Table Size The table size is 27.2*7.1(690mm*180mm).Spindle taper is 2(52mm).Integrated cross worktable, width is widened, high precision positioning adjustment scale. can be moved from front to back, left and right, spray paint at the bottom.
- R8 Tapper Accessory Benchtop mini milling drilling machine comes with a set of removable milling chuck and R8 tapper accessory,while giving a set of ER32 milling chuck accessories, without additional purchase.Package includes Benchtop mini milling drilling machine x1, Tool box x2, MT3-ER32 chucks set x1, Instruction x1, Hexagonal wrench x5, Fork wrench x2, Drill chuck x1, Drill chuck retaining pind x1, Plain Jaw Pliers x1, Screwdriver x2, Oil can x1.
- Salient Advantage The mill/drill machine with 1100W Brushless Motor, have Axis X power feed, Axis X power feed,high definition LCD, bench clamp, spindle feed handle, high precision table and 90 adjustable machine head tilt.
- Durable Construction Benchtop metal lathe use all metal gears, metal shell, metal hand wheel without any plastic parts.High frequency quenching process and precision grinding of high quality cast iron bed.Suitable for all kinds of metal, wood and other materials fine processing, widely used in machinery manufacturing, woodworking, DIY and so on.
- See more on Amazon...
👨🔧【R8 Tapper Accessory】Benchtop Mini Milling Drilling Machine Comes With A Set Of Removable Milling Chuck And R8 Tapper Accessory,While Giving A Set Of Er32 Milling Chuck Accessories, Without Additional Purchase.Package Includes Benchtop Mini Milling Drilling Machine X1, Tool Box X2, Mt3-Er32 Chucks Set X1, Instruction X1, Hexagonal Wrench X5, Fork Wrench X2, Drill Chuck X1, Drill Chuck Retaining Pind X1, Plain Jaw Pliers X1, Screwdriver X2, Oil Can X1..
👨🔧【Durable Construction】Benchtop Metal Lathe Use All Metal Gears, Metal Shell, Metal Hand Wheel Without Any Plastic Parts.High Frequency Quenching Process And Precision Grinding Of High Quality Cast Iron Bed.Suitable For All Kinds Of Metal, Wood And Other Materials Fine Processing, Widely Used In Machinery Manufacturing, Woodworking, Diy And So On..
👨🔧【Salient Advantage】The Mill/Drill Machine With 1100W Brushless Motor, Have Axis X Power Feed, Axis X Power Feed,High Definition Lcd, Bench Clamp, Spindle Feed Handle, High Precision Table And 90° Adjustable Machine Head Tilt..
👨🔧【27.2"*7.1" Table Size】The Table Size Is 27.2"*7.1"(690Mm*180Mm).Spindle Taper Is 2"(52Mm).Integrated Cross Worktable, Width Is Widened, High Precision Positioning Adjustment Scale. Can Be Moved From Front To Back, Left And Right, Spray Paint At The Bottom..
Brand: INTBUYING | Manufacturer: INTBUYING
Dimensions: 63.00 x 43.10 x 23.20 Inches | Weight: 294.00 pounds
See On Amazon #25
Mophorn Milling Working Table 17.7 X 6.7 Inch, Compound Milling Machine Work Table 2 Axis 4 Ways Move, Multifunction Milling Working Table Heavy-duty Structure,for Milling and Drilling Machine
Asin: B0713YLS3K | Model: Milling Working Table | PartNumber: Milling Working Table | Ean: 0768558005914 | UPC: 768558005914
Features
- Premium Quality Structure: Built by heavy-duty cast iron material, which is anti-corrosion and rust resistance, angle milling table can withstand the tough environment and designed for long service time.
- Highly Polishing & Stiffness: The compound slide table, with great hardness and stiffness, is high ground and not easy deformation. Three precise T-slots can meet different force requirements.
- 2 Axis 4 Ways Move: Handles with trapezoidal thread spindles is easy to adjust the directions. X-axis travel: 210 mm, Y-axis travel: 110 mm. With a precise scale on it, you can adjust the optimal working position as you need.
- Tightness Adjustment: Equipped with several quality bolts and nuts, you can easily adjust the tightness of this cross slide table. Convenient for your use.
- Wide Application Area: This milling working cross table machine is great for mounting on drilling machines for precise positioning. It can be used for most types of milling and drilling, ideal for all drill stands, drilling, and milling machines.
- See more on Amazon...
2 Axis 4 Ways Move: Handles With Trapezoidal Thread Spindles Is Easy To Adjust The Directions. X-Axis Travel: 210 Mm, Y-Axis Travel: 110 Mm. With A Precise Scale On It, You Can Adjust The Optimal Working Position As You Need..
Wide Application Area: This Milling Working Cross Table Machine Is Great For Mounting On Drilling Machines For Precise Positioning. It Can Be Used For Most Types Of Milling And Drilling, Ideal For All Drill Stands, Drilling, And Milling Machines..
Tightness Adjustment: Equipped With Several Quality Bolts And Nuts, You Can Easily Adjust The Tightness Of This Cross Slide Table. Convenient For Your Use..
Highly Polishing & Stiffness: The Compound Slide Table, With Great Hardness And Stiffness, Is High Ground And Not Easy Deformation. Three Precise T-Slots Can Meet Different Force Requirements..
Brand: Mophorn | Manufacturer: VEVOR
Weight: 66.14 pounds
See On Amazon #26
10 pcs 4-Flute End Mill Bits, AFUNTA 0.08" - 0.47" HSS CNC Straight Shank Drill Bits Cutter Tool Set for Wood Aluminum Steel Titanium
Asin: B07DQL66VF | Model: AF-4-flute_end_mill_10 | PartNumber: AF-4-flute_end_mill_10 | Ean: 0783710282415 | UPC: 783710282415
Features
- APPLICATION: Suitable for side milling, end milling, finish machining in carbon steel, alloy steel, die steel, tool steel, cast iron, and titanium.
- HIGH PROCESSING EFFICIENCY: the edge of end mill bits is HARD and SHARP with TIAIN coating, process the heat treatment materials with high speed, reduce changing times and improve the production efficiency.
- U-SHAPED GROOVE DESIGN, large front angle effectively reduces cutting resistance and sharp, convenient for chip removal, further improve machining efficiency.
- MATERIAL: high speed steel, high hardness, good wear resistance and durability.
- 10 DIFFERENT KINDS OF SIZE end mills to meet your need, 2mm/0.08in,3mm/0.12in, 4mm/0.16in, 5mm/0.2in, 6mm/0.24in,7mm/0.27in, 8mm/0.31in, 9mm/0.35in,10mm/0.39in, 12mm/0.47in
- See more on Amazon...
U-Shaped Groove Design, Large Front Angle Effectively Reduces Cutting Resistance And Sharp, Convenient For Chip Removal, Further Improve Machining Efficiency..
10 Different Kinds Of Size End Mills To Meet Your Need, 2Mm/0.08In,3Mm/0.12In, 4Mm/0.16In, 5Mm/0.2In, 6Mm/0.24In,7Mm/0.27In, 8Mm/0.31In, 9Mm/0.35In,10Mm/0.39In, 12Mm/0.47In.
Material: High Speed Steel, High Hardness, Good Wear Resistance And Durability..
High Processing Efficiency: The Edge Of End Mill Bits Is Hard And Sharp With Tiain Coating, Process The Heat Treatment Materials With High Speed, Reduce Changing Times And Improve The Production Efficiency..
Brand: AFUNTA | Manufacturer: AFUNTA
Weight: 0.04 pounds
See On Amazon #27
MUKLEI 12.2 Inches Milling Machine Worktable, Multifunction Mill Working Table, X-Y Axis Milling Machine for Mini Drill and Drill Bracket
Asin: B098L1FP9Q | Model: YUUHJUN | PartNumber: YUUHJUN | Ean: 0758226997764 | UPC: 758226997764
Features
- HIGH QUALITY WORKTABLE - Made of premium aluminum alloy, the milling machine worktable is sturdy, heavy-duty, anti-rust, and corrosion-resistant. The table works very smoothly and precisely. It can move left and right, forward and backward without getting stuck.
- ADJUSTABLE SCREW - There are 6 adjustable screws on the base of the multifunction worktable. 3 pieces on the X-axis and 3 on the Y-axis. There is a lock-nut on each screw, and you need to loosen the lock nut to adjust the screw. Slightly tighten the lock nut to remove any looseness in the cross-slide.
- WHAT YOU GET - A package contains a piece of mill machine with a size of 12.2 x 3.5 x 3 inches. It is composed of several parts, including the adjustable scale, the travel screw, the fixed jaw, the cross-slide, and the base.
- MULTI-PURPOSE MACHINE - The multifunction worktable is designed to work with bench drills. the worktable is widely used in garages, workshops, hardware stores, construction sites, and more. Whether you are a beginner or a professional, it will never let you down.
- NICE AFTER-SALES - We guarantee to provide you with a trustworthy refund service within 30 days. Please feel free to contact us if you have any dissatisfaction or improvement problems about scissor jacks , and we will reply you as soon as possible within 24 hours.
- See more on Amazon...
What You Get - A Package Contains A Piece Of Mill Machine With A Size Of 12.2 X 3.5 X 3 Inches. It Is Composed Of Several Parts, Including The Adjustable Scale, The Travel Screw, The Fixed Jaw, The Cross-Slide, And The Base..
Nice After-Sales - We Guarantee To Provide You With A Trustworthy Refund Service Within 30 Days. Please Feel Free To Contact Us If You Have Any Dissatisfaction Or Improvement Problems About Scissor Jacks , And We Will Reply You As Soon As Possible Within 24 Hours..
Multi-Purpose Machine - The Multifunction Worktable Is Designed To Work With Bench Drills. The Worktable Is Widely Used In Garages, Workshops, Hardware Stores, Construction Sites, And More. Whether You Are A Beginner Or A Professional, It Will Never Let You Down..
Adjustable Screw - There Are 6 Adjustable Screws On The Base Of The Multifunction Worktable. 3 Pieces On The X-Axis And 3 On The Y-Axis. There Is A Lock-Nut On Each Screw, And You Need To Loosen The Lock Nut To Adjust The Screw. Slightly Tighten The Lock Nut To Remove Any Looseness In The Cross-Slide..
Brand: MUKLEI | Manufacturer: YUUHJUN
See On Amazon #28
Accusize Industrial Tools 20 Pc Hss Tin Coated End Mill Set, 2 Flute and 4 Flute, Cutting Diameter from 3/16'' up to 3/4'', 1810-0100
Asin: B01FGFFDAU | Model: 1810-0100 | PartNumber: 1810-0100 | Ean: 0641799801654, 0663566003948, 7241871027823 | UPC: 663566003948, 641799801654
Features
- H.S.S.
- Straight Shank.
- One of each size in both 2 & 4 flute: with 3/8'' shank:3/16'', 1/4'', 5/16'', 3/8'', 7/16'', With 1/2'' shank: 1/2'',9/16'', With 5/8'' shank: 5/8'',11/16'', With 3/4'' shank: 3/4''
- 2 Flutes End Mills: These end mills have a cutting diameter ranging from 3/16 to 3/4, a shank diameter ranging from 3/8 to 3/4, a flute length ranging from 7/16 to 1-5/16, and an overall length ranging from 2-5/16 to 3-9/16.
- 4 Flutes End Mills: These end mills have a cutting diameter ranging from 3/16 to 3/4, a shank diameter ranging from 3/8 to 3/4, a flute length ranging from 1/2 to 1-5/8, and an overall length ranging from 2-3/8 to 3-3/8.
- Versatile Cutting Range: Features end mills from 3/16 to 3/4 in both 2F & 4F, suitable for various material and application needs.
- Durable H.S.S. with TiN Coating: High-speed steel construction with Titanium Nitride coating for enhanced longevity and performance.
- Shank Size Variety: Includes 3/8, 1/2, 5/8, and 3/4 shanks, ensuring compatibility with a wide range of milling machines.
- Application Specific Design: 4-flute for steel and 2-flute for wood, plastics, aluminum, and non-ferrous metals, covering a broad machining spectrum.
- Comprehensive Milling Operations: Ideal for face, ramping, slot, plunge, and pocket milling, offering flexibility in machining strategies.
- See more on Amazon...
One Of Each Size In Both 2 & 4 Flute: With 3/8'' Shank:3/16'', 1/4'', 5/16'', 3/8'', 7/16'', With 1/2'' Shank: 1/2'',9/16'', With 5/8'' Shank: 5/8'',11/16'', With 3/4'' Shank: 3/4''.
Comprehensive Milling Operations: Ideal For Face, Ramping, Slot, Plunge, And Pocket Milling, Offering Flexibility In Machining Strategies..
Durable H.S.S. With Tin Coating: High-Speed Steel Construction With Titanium Nitride Coating For Enhanced Longevity And Performance..
Shank Size Variety: Includes 3/8", 1/2", 5/8", And 3/4" Shanks, Ensuring Compatibility With A Wide Range Of Milling Machines..
4 Flutes End Mills: These End Mills Have A Cutting Diameter Ranging From 3/16" To 3/4", A Shank Diameter Ranging From 3/8" To 3/4", A Flute Length Ranging From 1/2" To 1-5/8", And An Overall Length Ranging From 2-3/8" To 3-3/8"..
Versatile Cutting Range: Features End Mills From 3/16" To 3/4" In Both 2F & 4F, Suitable For Various Material And Application Needs..
2 Flutes End Mills: These End Mills Have A Cutting Diameter Ranging From 3/16" To 3/4", A Shank Diameter Ranging From 3/8" To 3/4", A Flute Length Ranging From 7/16" To 1-5/16", And An Overall Length Ranging From 2-5/16" To 3-9/16"..
Application Specific Design: 4-Flute For Steel And 2-Flute For Wood, Plastics, Aluminum, And Non-Ferrous Metals, Covering A Broad Machining Spectrum..
Straight Shank..
Brand: Accusize Industrial Tools | Manufacturer: Accusize Co., Ltd.
Dimensions: 5.91 x 11.81 x 3.94 Inches
See On Amazon #29
Precision Fine Micro Drill Mill Adapter Miniature Quill 1/2" Shank with JT0 Drill Chuck 0.3-4 mm-Manual Feed Control Avoids Drill Breakage-Engineering Tools Accessories
Asin: B06ZYT62Z1
Features
- This small Micro Drill Adaptor ( sensitive drill adaptor) is like a miniature quill.
- Sensitive Finger Control. Controls manual feed pressure very easily.
- Helps in preventing Drill breakage and well suited for making small holes with large machines. Shank is 1/2 Straight.
- & is designed to drill small holes using a lathe, mill or pillar drill.
- Drill Chuck Taper is JT0 included in the Package. Chuck Capacity is 0.3 to 4 mm
- See more on Amazon...
Helps In Preventing Drill Breakage And Well Suited For Making Small Holes With Large Machines. Shank Is 1/2" Straight..
Drill Chuck Taper Is Jt0 Included In The Package. Chuck Capacity Is 0.3 To 4 Mm.
& Is Designed To Drill Small Holes Using A Lathe, Mill Or Pillar Drill..
Sensitive Finger Control. Controls Manual Feed Pressure Very Easily..
Brand: ASSORTS | Manufacturer: Global Tools
See On Amazon #30
Earl Diamond Super Heavy Duty APU16 1/32-5/8 Inch R8 Shank Precision Integrated Keyless Drill Chuck
Asin: B07Y6NWP4T | Ean: 0034948681687 | UPC: 034948681687
Features
- Material: 40CR, hardness HRC60.
- Bit holding capacity: Clamping Capacity 1/32-5/8; Shank R8.
- R8 shank: Suitable for drill presses or lathes spindle accepts R8 shank.
- Maximum T. I. R. does not exceed . 002; Keyless, self tightening design.
- Design: Integral Shank is more compact than a combined drill chuck ,self-tightening key-less feature automatically increasing gripping force, high reliability, and stability.
- See more on Amazon...
R8 Shank: Suitable For Drill Presses Or Lathes Spindle Accepts R8 Shank..
Design: Integral Shank Is More Compact Than A Combined Drill Chuck ,Self-Tightening Key-Less Feature Automatically Increasing Gripping Force, High Reliability, And Stability..
Maximum T. I. R. Does Not Exceed . 002"; Keyless, Self Tightening Design..
Bit Holding Capacity: Clamping Capacity 1/32"-5/8"; Shank R8..
Brand: Earl Diamond | Manufacturer: Earl Diamond
Dimensions: 7.48 x 2.36 x 2.36 Inches
See On Amazon
Looking For Something Else?
Search