Best Electrical Brackets - Buying Guide
Last Updated: 04/27/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
VCE Low Voltage Mounting Bracket (1 Gang, 5 Pack) for Single Gang Wall Plate, Telephone Wires, Network Cables, HDMI, Coaxial, Speaker Cables, Black
Asin: B07J4YS51F | Model: A177BK-5P-US | PartNumber: A177BK-5P-US
Features
- Flush Mounting - VCE single gang low voltage mounting bracket is designed for mounting wall plates flush with the wall
- Fully adjustable - Adjusts to fit various wall thickness; The wall thickness supported by this bracket is up to 20mm(0.787in).
- Easy to install - Horizontal or vertical mounting. Installation can be finished in a few minutes. Note: the distance between the walls needs to be at least 45mm(1.77 inch)
- Wide compatibility - Great for low voltage cables(speaker wires, coaxial, HDMI and data/communication cables, banana wall plates.)
- Package contents - 5 x Single Gang Low Voltage Mounting Bracket; 18 months warranty for quality problems.
- See more on Amazon...
Easy To Install - Horizontal Or Vertical Mounting. Installation Can Be Finished In A Few Minutes. Note: The Distance Between The Walls Needs To Be At Least 45Mm(1.77 Inch).
Package Contents - 5 X Single Gang Low Voltage Mounting Bracket; 18 Months Warranty For Quality Problems..
Wide Compatibility - Great For Low Voltage Cables(Speaker Wires, Coaxial, Hdmi And Data/Communication Cables, Banana Wall Plates.).
Fully Adjustable - Adjusts To Fit Various Wall Thickness; The Wall Thickness Supported By This Bracket Is Up To 20Mm(0.787In)..
Brand: VCE | Manufacturer: VCE
Dimensions: 0.15 x 3.98 x 2.00 inches | Weight: 0.22 pounds
Warranty: 18 months warranty
See On Amazon #2
Rack-A-Tiers Mfg | Cable Chase 10 Pack Wire Bracket CC9024.P10
Asin: B0BLHVFJFC | Model: CC9024.P10 | PartNumber: CC9024.P10 | Ean: 0625912690257 | UPC: 625912690257
Features
- Main Body: 2 1/2 x 6 3/8 , Plate: 1 1/8 x 6 3/8 Hole Diameter: 1
- Conforms to UL STD 2239, Certified to CSA STD C22.2 No. 18.4, Accepted by IEAI
- Follows the same guidelines as typical wire fill calculation
- Leaves room for future expansion
- Maximum distance between each Cable Chase Wire Bracket under floor joists is 16 (when using under floor joists, the maximum distance, on one side from any wall, joist, pipe or ductwork is 12 )
- Maximum distance between each Cable Chase Wire Bracket along floor joists is 30
- Maximum distance between each Cable Chase Wire Bracket above ceiling joists is 24
- Wire fill per hole: No more than (3) of 14-2, 14-3, 12-2, 12-3 romex. No more than (2) of 10-2, 10-3, 8-2, 6-2 romex. No more than (1) of 8-3, 6-3 romex and any SER up to #2. Unlimited low voltage, data, phone, cable
- See more on Amazon...
Follows The Same Guidelines As Typical Wire Fill Calculation.
Maximum Distance Between Each Cable Chase Wire Bracket Above Ceiling Joists Is 24″.
Wire Fill Per Hole: No More Than (3) Of 14-2, 14-3, 12-2, 12-3 Romex. No More Than (2) Of 10-2, 10-3, 8-2, 6-2 Romex. No More Than (1) Of 8-3, 6-3 Romex And Any Ser Up To #2. Unlimited Low Voltage, Data, Phone, Cable.
Maximum Distance Between Each Cable Chase Wire Bracket Under Floor Joists Is 16″ (When Using Under Floor Joists, The Maximum Distance, On One Side From Any Wall, Joist, Pipe Or Ductwork Is 12″).
Maximum Distance Between Each Cable Chase Wire Bracket Along Floor Joists Is 30″.
Leaves Room For Future Expansion.
Conforms To Ul Std 2239, Certified To Csa Std C22.2 No. 18.4, Accepted By Ieai.
Brand: Rack-A-Tiers | Manufacturer: Rack-A-Tiers
See On Amazon #3
Legrand/On-Q AC101001 1-Gang Low Voltage Bracket, Retrofit , Grey
Asin: B0034XRLFM | Model: AC101001 | PartNumber: AC101001 | Ean: 0804428026051 | UPC: 804428026051
Features
- VOLTAGE BRACKET: 1 Gang Low voltage bracket has convenient metallic swing brackets, clamp brackets in place
- EASE OF ALIGNMENT: In voltage brackets, the rigid plastic retains shape for ease of alignment during installation and the reliable side stabilizer tabs keep it aligned with the stud
- AVAILABLE SIZE AND COLOR: The low voltage bracket is available in a different size Three Gang (2-Pack), Single Gang, Three Gang, Two Gang. Its dimension is 10 x 10 x 8 inches. The Green color easily distinguishes opening for low voltage products
- CERTIFIED: The On Q 1 Gang low voltage bracket certified with UL standard
- See more on Amazon...
Available Size And Color: The Low Voltage Bracket Is Available In A Different Size – Three Gang (2-Pack), Single Gang, Three Gang, Two Gang. Its Dimension Is 10 X 10 X 8 Inches. The Green Color Easily Distinguishes Opening For Low Voltage Products.
Certified: The On Q 1 Gang Low Voltage Bracket Certified With Ul Standard.
Ease Of Alignment: In Voltage Brackets, The Rigid Plastic Retains Shape For Ease Of Alignment During Installation And The Reliable Side Stabilizer Tabs Keep It Aligned With The Stud.
Brand: On-Q | Manufacturer: Legrand On-Q
Dimensions: 5.98 x 12.99 x 5.00 Inches | Weight: 0.02 pounds
Warranty: 12 months from date of purchase
See On Amazon #4
QWORK Low Voltage Mounting Bracket, 20 Pack 1 Gang Single Gang Drywall Mounting Wall Plate Bracket for Telephone Wires, Network Cables
Asin: B0C1SDB7KX | Model: WD30193 | PartNumber: WD30193 | Ean: 0795973603524 | UPC: 795973603524
Features
- Fully adjustable: Adjust to fit 1/4 inch to 1 inch thick wallboard, gypsum board or paneling.
- Design: Designed for flush installation of wall panels, with oval holes on the bracket for final displacement and straightening.
- Easy Installation: Horizontal or vertical installation, used to install low-voltage wires and cables, with fast installation speed.
- Widely Used: The bracket offers a convenient solution for installing various types of low-voltage wiring such as telephone wires, network cables, HDMI, coaxial, and speaker cables.
- Package Includes: 20 Pieces 1 Gang single gang low-voltage brackets, including mounting screws.
- See more on Amazon...
Easy Installation: Horizontal Or Vertical Installation, Used To Install Low-Voltage Wires And Cables, With Fast Installation Speed..
Package Includes: 20 Pieces 1 Gang Single Gang Low-Voltage Brackets, Including Mounting Screws..
Widely Used: The Bracket Offers A Convenient Solution For Installing Various Types Of Low-Voltage Wiring Such As Telephone Wires, Network Cables, Hdmi, Coaxial, And Speaker Cables..
Design: Designed For Flush Installation Of Wall Panels, With Oval Holes On The Bracket For Final Displacement And Straightening..
Brand: QWORK | Manufacturer: QWORK
See On Amazon #5
DENGNBJ 4 Inch Ceiling Light Fixture Mounting Bracket, Mounting Bracket with Screws and Nuts for Mounting Outdoor Wall Lights, Chandeliers
Asin: B0C7BDNKRY | Model: 24 | PartNumber: 24
Features
- PACKAGE INCLUDES 2 X light fixture crossbars, 4 X crossbar mounting screws, 2 X ground screws, 6 X connectors, 4 X black cap nuts, 4 X Lock Nuts, 4 X flat washers.
- DURABLE MATERIAL 2 Sets universal crossbars are made of high quality zinc plated steel : durable and rust resistant for ensuring your safe use and reliability for a longer service life.
- WIDE APPLICATION This light fixture mounting bracket adapter is designed to attach fixtures and canopies to electrical junction boxes. 2 Pack can satisfy your multiple needs, you can use it for mount wall light, LED light, pendant light and chandelier, Ceiling fan lights etc.
- EASY TO USE 4 Inches diameter universal mounting plate fits most ceiling lights. Including ground screws, wiring nuts and crossbar mounting screws, you just use it to mount light fixtures without buying other mounting hardware.
- AFTER-SALES SERVICE If you are not satisfied for any reason, just return for a refund of your purchase price; we promise 24 hours customer support, please feel free to contact us for any product&order problem.
- See more on Amazon...
【Wide Application】 This Light Fixture Mounting Bracket Adapter Is Designed To Attach Fixtures And Canopies To Electrical Junction Boxes. 2 Pack Can Satisfy Your Multiple Needs, You Can Use It For Mount Wall Light, Led Light, Pendant Light And Chandelier, Ceiling Fan Lights Etc..
【After-Sales Service】If You Are Not Satisfied For Any Reason, Just Return For A Refund Of Your Purchase Price; We Promise 24 Hours Customer Support, Please Feel Free To Contact Us For Any Product&Order Problem..
【Easy To Use】4 Inches Diameter Universal Mounting Plate Fits Most Ceiling Lights. Including Ground Screws, Wiring Nuts And Crossbar Mounting Screws, You Just Use It To Mount Light Fixtures Without Buying Other Mounting Hardware..
【Durable Material】2 Sets Universal Crossbars Are Made Of High Quality Zinc Plated Steel : Durable And Rust Resistant For Ensuring Your Safe Use And Reliability For A Longer Service Life..
Brand: DENGNBJ | Manufacturer: DENGNBJ
Dimensions: 0.05 x 4.00 x 4.00 Inches
Warranty: 2.
See On Amazon #6
BestMounts - 5 Pack Low Voltage Mounting Brackets 1 Gang for Drywall Outlet Cable Pass Through Wall Plates - Cable Wall Plate Bracket for Old Work, Telephone Wire, Network Cable, HDMI, Speaker Wire
Asin: B0CPHYQB2V | Model: LV1-5P | PartNumber: LV1-5P | Ean: 0812326006303 | UPC: 812326006303
Features
- Flush Wall Plate Mounting Bracket: The BestMounts single gang low voltage mounting bracket is specifically designed for flush mounting wall plates, allowing them to be installed seamlessly with the wall surface.
- Adjustable Bracket for Optimal Positioning - Our low voltage bracket adjusts to fit various wall thickness, from 1/4-inch to 1-inch thick wall board, paneling, or drywalll, Ideal solution for mounting low voltage wires (phone, internet, TV, video)
- EASY TO INSTALL - Bracket has its own template for cut out , USE 4 Corner holes to MARK WALL OPENING, This low voltage bracket can be installed vertically or horizontally, Ideal for a few renovation projects at home or in the office
- Versatile Compatibility: Our drywall bracket is widely compatible with speaker wires, coaxial, HDMI and data/communication cables, offering versatile installation options for your audio & video system
- Our low voltage mounting bracket comes with a 180-day warranty for quality assurance, and we provide dedicated customer assistance to address any inquiries or issues you may have.
- See more on Amazon...
Easy To Install - Bracket Has Its Own Template For Cut Out , Use 4 Corner Holes To Mark Wall Opening, This Low Voltage Bracket Can Be Installed Vertically Or Horizontally, Ideal For A Few Renovation Projects At Home Or In The Office.
Our Low Voltage Mounting Bracket Comes With A 180-Day Warranty For Quality Assurance, And We Provide Dedicated Customer Assistance To Address Any Inquiries Or Issues You May Have..
Versatile Compatibility: Our Drywall Bracket Is Widely Compatible With Speaker Wires, Coaxial, Hdmi And Data/Communication Cables, Offering Versatile Installation Options For Your Audio & Video System.
Adjustable Bracket For Optimal Positioning - Our Low Voltage Bracket Adjusts To Fit Various Wall Thickness, From 1/4-Inch To 1-Inch Thick Wall Board, Paneling, Or Drywalll, Ideal Solution For Mounting Low Voltage Wires (Phone, Internet, Tv, Video).
Brand: Best Mounts | Manufacturer: Best View Mounts
Dimensions: 1.70 x 5.40 x 2.60 inches
Warranty: 180 Days
See On Amazon #7
Tsurpcao 4Inches Universal Light Fixture mounting Bracket, 8 Sets 4" Circle Mounting Bracket for Mount Wall Light, Chandelier
Asin: B0BXSDJXC1 | Model: ju2 | PartNumber: ju2 | Ean: 0616943711158 | UPC: 616943711158
Features
- PACKAGE INCLUDES - 8 x light fixture mounting plates; 16 x crossbar mounting screws;8 x ground screws; 8 x wiring nuts.
- SIZE DETAIL l-The light fixture crossbar measures approx. 4 inches in diameter,Dimensions for the holes are center to center 2-1/8, 2-3/4, and 3-1/2.
- DURABLE MATERIAL - Made of zinc plated iron,, sturdy, durable and anti-rust for a longer service life, reliable enough to ensure your safe use
- EASY TO INSTALL - our 4 inches diameter universal mounting plate fits most ceiling lights, Comes with all needed accessories for quick and easy installation.
- WIDE APPLICATION - Light Fixture Mounting Bracket designed to connect fixtures and canopies to electrical junction boxes,perfect for wall light, close to ceiling light, LED light, pendant light and chandelier, etc.
- See more on Amazon...
Durable Material - Made Of Zinc Plated Iron,, Sturdy, Durable And Anti-Rust For A Longer Service Life, Reliable Enough To Ensure Your Safe Use.
Wide Application - Light Fixture Mounting Bracket Designed To Connect Fixtures And Canopies To Electrical Junction Boxes,Perfect For Wall Light, Close To Ceiling Light, Led Light, Pendant Light And Chandelier, Etc..
Easy To Install - Our 4 Inches Diameter Universal Mounting Plate Fits Most Ceiling Lights, Comes With All Needed Accessories For Quick And Easy Installation..
Size Detail L-The Light Fixture Crossbar Measures Approx. 4 Inches In Diameter,Dimensions For The Holes Are Center To Center 2-1/8", 2-3/4", And 3-1/2"..
Brand: Tsurpcao | Manufacturer: Tsurpcao
Dimensions: 0.20 x 4.00 x 4.00 Inches
Warranty: 2.
See On Amazon #8
5 Pack Low Voltage Mounting Brackets 1 Gang for Drywall Outlet Cable Pass Through Wall Plates - Cable Wall Plate Bracket for Old Work, Telephone Wires, Network Cable, HDMI, Coaxial & Speaker Wire
Asin: B0BPFBQPSF | Model: TKCO-UNi05 | PartNumber: TKCO-UNi05 | Ean: 0812326007560 | UPC: 812326007560
Features
- Flush Wall Plate Mounting Bracket: The BWP single gang low voltage mounting bracket is specifically designed for flush mounting wall plates, allowing them to be installed seamlessly with the wall surface
- Adjustable Bracket for Optimal Positioning - Our low voltage bracket adjusts to fit various wall thickness, from 1/4-inch to 1-inch thick wall board, paneling, or drywalll, Ideal solution for mounting low voltage wires (phone, internet, TV, video)
- EASY TO INSTALL - Bracket has its own template for cut out , USE 4 Corner holes to MARK WALL OPENING, This low voltage bracket can be installed vertically or horizontally, Ideal for a few renovation projects at home or in the office
- Versatile Compatibility: Our drywall bracket is widely compatible with speaker wires, coaxial, HDMI and data/communication cables, offering versatile installation options for your audio & video system
- Our low voltage mounting bracket comes with a 180-day warranty for quality assurance, and we provide dedicated customer assistance to address any inquiries or issues you may have
- See more on Amazon...
Easy To Install - Bracket Has Its Own Template For Cut Out , Use 4 Corner Holes To Mark Wall Opening, This Low Voltage Bracket Can Be Installed Vertically Or Horizontally, Ideal For A Few Renovation Projects At Home Or In The Office.
Our Low Voltage Mounting Bracket Comes With A 180-Day Warranty For Quality Assurance, And We Provide Dedicated Customer Assistance To Address Any Inquiries Or Issues You May Have.
Versatile Compatibility: Our Drywall Bracket Is Widely Compatible With Speaker Wires, Coaxial, Hdmi And Data/Communication Cables, Offering Versatile Installation Options For Your Audio & Video System.
Adjustable Bracket For Optimal Positioning - Our Low Voltage Bracket Adjusts To Fit Various Wall Thickness, From 1/4-Inch To 1-Inch Thick Wall Board, Paneling, Or Drywalll, Ideal Solution For Mounting Low Voltage Wires (Phone, Internet, Tv, Video).
Brand: BWP | Manufacturer: BWP
Dimensions: 1.70 x 4.60 x 2.60 inches
See On Amazon #9
ANONION 22 Pack Single Gang Multipurpose Drywall Wall Plate Low Voltage Mounting Bracket Device Black
Asin: B0994VN2JX | Ean: 0611434222113 | UPC: 611434222113
Features
- Cable Management : Perfect for mounting low voltage wires, HDMI, TV, coaxial, speaker, telephone, home theater, computer wiring and networking wall plates, switch cover.
- Package include : 22 pack single gang black low voltage mounting bracket.
- Simple and Practical : Works perfectly with all cable types. Features one opening for cable run through. Easily creates cable access from any wall.Installation can be finished in a few minutes.
- Clean and Tidy : Run your cables cleanly and neatly through the wall. Fits into any standard decorator opening. This white wall plate to match your whole house panel.
- Easy to Install : Wall plates mount flush against wall. Easy and convenient to operate. Insert the brush into the outer casing and place on the wall. Run cables through wall work well, single gang wall plate easily creates cable access from any wall.
- See more on Amazon...
Simple And Practical : Works Perfectly With All Cable Types. Features One Opening For Cable Run Through. Easily Creates Cable Access From Any Wall.Installation Can Be Finished In A Few Minutes..
Easy To Install : Wall Plates Mount Flush Against Wall. Easy And Convenient To Operate. Insert The Brush Into The Outer Casing And Place On The Wall. Run Cables Through Wall Work Well, Single Gang Wall Plate Easily Creates Cable Access From Any Wall..
Clean And Tidy : Run Your Cables Cleanly And Neatly Through The Wall. Fits Into Any Standard Decorator Opening. This White Wall Plate To Match Your Whole House Panel..
Package Include : 22 Pack Single Gang Black Low Voltage Mounting Bracket..
Brand: ANONION | Manufacturer: HONGYE
Dimensions: 1.70 x 4.25 x 2.50 Inches
See On Amazon #10
Skywalker Single-Gang Drywall Brackets (Pack of 10)
Asin: B00ARKA7CY | Model: SKYLVB10 | PartNumber: SKYLVB10 | Ean: 0852659307746 | UPC: 852659307746
Features
- These handy brackets work in place of standard low-voltage outlet boxes & fit single-gang volume controls, switches, or wall plates
- Ideal for retrofit & adding component outlets after construction
- No more plastic cut-in boxes needed! Plus the hardware is included
- Designed for low-voltage Class 2 applications ONLY | Metal | Pack of 10
- See more on Amazon...
No More Plastic Cut-In Boxes Needed! Plus The Hardware Is Included.
Designed For Low-Voltage Class 2 Applications Only | Metal | Pack Of 10.
Ideal For Retrofit & Adding Component Outlets After Construction.
Brand: Skywalker | Manufacturer: Skywalker
Dimensions: 4.25 x 0.10 x 2.50 inches
See On Amazon #11
Cmple - Low Voltage Mounting Bracket 1 Gang Multipurpose Drywall Mounting Wall Plate Bracket Single Gang
Asin: B003ZWJGGE | Model: 1081-527-N | PartNumber: 1081-527-N | Ean: 0815239011891 | UPC: 815239011891
Features
- SINGLE-GANG Low Voltage Backless Old Work Bracket- Designed for low-voltage devices in an existing wall
- EASY TO INSTALL - Fully adjustable, ideal solution for mounting low voltage wires (phone, internet, TV, video)
- ADJUSTS TO FIT various wall thickness, the bracket wings secure when mounting screws are tightened
- PVC CONSTRUCTION for durable performance. Installs vertically or horizontally. Lifetime Warranty
- PACKAGE INCLUDE: 1 x Single Gang Low Voltage Bracket, Mounting Screws Included
- See more on Amazon...
Adjusts To Fit Various Wall Thickness, The Bracket Wings Secure When Mounting Screws Are Tightened.
Package Include: 1 X Single Gang Low Voltage Bracket, Mounting Screws Included.
Pvc Construction For Durable Performance. Installs Vertically Or Horizontally. Lifetime Warranty.
Easy To Install - Fully Adjustable, Ideal Solution For Mounting Low Voltage Wires (Phone, Internet, Tv, Video).
Brand: Cmple | Manufacturer: Cmple
Dimensions: 0.98 x 0.98 x 0.98 Inches | Weight: 0.07 Pounds
See On Amazon #12
(50 Pack) Orbit BHA -24 Adjustable Box Bracket
Asin: B07VT6Y1NX | Ean: 0682550997315 | UPC: 682550997315
Features
- Ends bend and wrap around stud
- Can be used with boxes 1-1/2 , 2-1/8 or 2-1/2 deep
- Can be installed between ceiling joists or wall studs
- See more on Amazon...
Can Be Installed Between Ceiling Joists Or Wall Studs.
Can Be Used With Boxes 1-1/2”, 2-1/8” Or 2-1/2" Deep.
Brand: DE Supply | Manufacturer: DE Supply
Weight: 0.00 Pounds
See On Amazon #13
BestMounts - 12 Pack Low Voltage Mounting Brackets 1 Gang for Drywall Outlet Cable Pass Through Wall Plates - Cable Wall Plate Bracket for Old Work, Telephone Wires, Network Cable, HDMI, Speaker Wire
Asin: B09BK9R9X5 | Model: UN-SINGLE-12 | PartNumber: UN-SINGLE-12 | Ean: 0812326009953 | UPC: 812326009953
Features
- Flush Wall Plate Mounting Bracket: The BestMounts dual gang low voltage mounting bracket is specifically designed for flush mounting wall plates, allowing them to be installed seamlessly with the wall surface.
- Adjustable Bracket for Optimal Positioning - Our low voltage bracket adjusts to fit various wall thickness, from 1/4-inch to 1-inch thick wall board, paneling, or drywalll, Ideal solution for mounting low voltage wires (phone, internet, TV, video)
- EASY TO INSTALL - Bracket has its own template for cut out , USE 4 Corner holes to MARK WALL OPENING, This low voltage bracket can be installed vertically or horizontally, Ideal for a few renovation projects at home or in the office
- Versatile Compatibility: Our drywall bracket is widely compatible with speaker wires, coaxial, HDMI and data/communication cables, offering versatile installation options for your audio & video system
- Our low voltage mounting bracket comes with a 180-day warranty for quality assurance, and we provide dedicated customer assistance to address any inquiries or issues you may have.
- See more on Amazon...
Easy To Install - Bracket Has Its Own Template For Cut Out , Use 4 Corner Holes To Mark Wall Opening, This Low Voltage Bracket Can Be Installed Vertically Or Horizontally, Ideal For A Few Renovation Projects At Home Or In The Office.
Our Low Voltage Mounting Bracket Comes With A 180-Day Warranty For Quality Assurance, And We Provide Dedicated Customer Assistance To Address Any Inquiries Or Issues You May Have..
Versatile Compatibility: Our Drywall Bracket Is Widely Compatible With Speaker Wires, Coaxial, Hdmi And Data/Communication Cables, Offering Versatile Installation Options For Your Audio & Video System.
Adjustable Bracket For Optimal Positioning - Our Low Voltage Bracket Adjusts To Fit Various Wall Thickness, From 1/4-Inch To 1-Inch Thick Wall Board, Paneling, Or Drywalll, Ideal Solution For Mounting Low Voltage Wires (Phone, Internet, Tv, Video).
Brand: Best Mounts | Manufacturer: Best View Mounts
Dimensions: 1.70 x 5.40 x 2.60 inches
See On Amazon #14
iMBAPrice LV1-2PK Single Gang (1-Gang) Low Voltage Mounting Bracket - Black (Pack of 2)
Asin: B00HYHEC38 | Model: LV1-2PK | PartNumber: LV1-2PK | Ean: 0617689104365, 0617689103269 | UPC: 617689103269, 617689104365
Features
- Single gang (1-gang) Low Voltage Mounting Bracket - black (pack of 2)
- Adjusts to fit 1/4-inch to 1-inch thick wall board, paneling or drywall
- Horizontal or vertical mounting
- Designed to mount wall plates flush
- See more on Amazon...
Horizontal Or Vertical Mounting.
Designed To Mount Wall Plates Flush.
Adjusts To Fit 1/4-Inch To 1-Inch Thick Wall Board, Paneling Or Drywall.
First Available: 04/16/2019
Brand: iMBAPrice | Manufacturer: iMBAPrice
Dimensions: 1.00 x 3.00 x 3.00 inches
Warranty: no
See On Amazon #15
ISPINNER 25pcs 1/2 Inch Zinc Plated Steel EMT Pipe Straps with 1 Hole for EMT Conduit or Pipe Fixing
Asin: B09ZP339CL | Model: EMT-1/2INCH | PartNumber: EMT-1/2INCH
Features
- HIGH QUALITY - Made of quality zinc plated carbon steel with high hardness, wear resistance and rust resistance. Zinc plated surface makes it more durable, anti-corrosion and anti-oxidation.
- SIZE & QUANTITY - 1/2 Inch EMT pipe straps packed in a plastic case. Band Width 16mm, Hole Diameter 6mm, Thickness 1mm.
- FEATURES - These EMT pipe straps are UL listed and strong enough to hold your pipe securely.
- EASY TO USE - It's easy to fasten the pipe to any surfaces with its single hole design. Just secure EMT conduit with the snap-on installation.
- WIDE APPLICATION - Can be used for fixing EMT conduit or other pipes in various surfaces and support structures, great for fixed pipeline with oil, water, gas medium in metallurgy, petroleum, chemicals, vehicles, ships, power hydraulic systems and indoor or outdoor EMT conduit.
- See more on Amazon...
Features - These Emt Pipe Straps Are Ul Listed And Strong Enough To Hold Your Pipe Securely..
Wide Application - Can Be Used For Fixing Emt Conduit Or Other Pipes In Various Surfaces And Support Structures, Great For Fixed Pipeline With Oil, Water, Gas Medium In Metallurgy, Petroleum, Chemicals, Vehicles, Ships, Power Hydraulic Systems And Indoor Or Outdoor Emt Conduit..
Easy To Use - It's Easy To Fasten The Pipe To Any Surfaces With Its Single Hole Design. Just Secure Emt Conduit With The Snap-On Installation..
Size & Quantity - 1/2 Inch Emt Pipe Straps Packed In A Plastic Case. Band Width 16Mm, Hole Diameter 6Mm, Thickness 1Mm..
Brand: ISPINNER | Manufacturer: XM
Dimensions: 0.71 x 4.72 x 4.72 Inches
See On Amazon #16
NIDAYE Single-Gang Multipurpose Drywall Brackets, Low Voltage Mounting Plate Bracket, 10 Packs
Asin: B0CCHMR3KG | Model: N-zj | PartNumber: N-zj
Features
- 1.Use these single gang electrical box brackets to install standard low-voltage outlet boxes in existing drywall
- 2. Crafted to fit single-gang volume controls, switches, or wall plates
- 3.Perfect for house s retrofit & adding component outlets after construction
- 4.Please note: Designed for low voltage class 2 applications ONLY- 120V devices should not be used with this bracket
- 5.Package contains 10 pieces metal brackets, mounting hardware included
- See more on Amazon...
3.Perfect For House’S Retrofit & Adding Component Outlets After Construction.
5.Package Contains 10 Pieces Metal Brackets, Mounting Hardware Included.
4.Please Note: Designed For Low Voltage Class 2 Applications Only- 120V Devices Should Not Be Used With This Bracket.
2. Crafted To Fit Single-Gang Volume Controls, Switches, Or Wall Plates.
Brand: NIDAYE | Manufacturer: NIDAYE
Dimensions: 0.04 x 3.94 x 2.68 Inches
See On Amazon #17
10 Pcs, Zinc Plated Steel Device Leveler & Retainer to Support Switches, Outlets & Devices In Over-Sized Drywall Openings
Asin: B0786YJQJH | Model: DLC | PartNumber: DLC | Ean: 0655222857088 | UPC: 655222857088
Features
- Garvin Industries device leveler and retainer is used to support switches, outlets and devices in over-sized drywall openings. This unit helps prevent device from being pushed back into wall opening. Unique design secures floating devices and makes them rigid and sturdy.
- See more on Amazon...
Brand: Garvin | Manufacturer: GARVIN
Weight: 0.04 pounds
See On Amazon #18
Single Gang Low Voltage Mounting Bracket | Low Voltage Retro Box 10 Pack
Asin: B09LCGVC7B | Model: HJB2-104P | PartNumber: HJB2-104P | Ean: 0195893722471 | UPC: 195893722471
Features
- To improve Control and Precision, it is recommendable to draft the Locking Tab thread prior the installation. Given the material on this product has been reinforced for sturdiness, drafting the thread prior the installation will improve and ease handling and control.
- See more on Amazon...
Brand: EERONS | Manufacturer: eerons
Dimensions: 5.00 x 8.00 x 6.00 inches
See On Amazon #19
TENINYU Low Voltage Mounting Bracket (1-Gang, 2 Pack), 1-Gang/Single-Gang Mounting Bracket [Mounting Screws Included] for Wall Plate, Black
Asin: B07PYJCBXX | Model: BKT-1G-BK-ALL | PartNumber: BKT-1G-BK-ALL | Ean: 0740385336010 | UPC: 740385336010
Features
- This mounting bracket Use with 1-Gang Wall plate, For installing low voltage cables and wires.
- Mounts wall plates flush with the wall, Easy to Install,Clean and Tidy,Simple and Practical.
- Works perfect for low voltage cables. Cable Management, Including AV,HDMI,home theater,coax cables,speaker wires,network cables and more.
- Package include : 2-Pack 1 Gang black low voltage mounting bracket.
- The bracket measures 4.25 x 2.5 x 1.7 (10.8 x 63.5 x 4.4cm).
- See more on Amazon...
Works Perfect For Low Voltage Cables. Cable Management, Including Av,Hdmi,Home Theater,Coax Cables,Speaker Wires,Network Cables And More..
The Bracket Measures 4.25" X 2.5" X 1.7" (10.8 X 63.5 X 4.4Cm)..
Package Include : 2-Pack 1 Gang Black Low Voltage Mounting Bracket..
Mounts Wall Plates Flush With The Wall, Easy To Install,Clean And Tidy,Simple And Practical..
Brand: TENINYU | Manufacturer: TENINYU INC.
Dimensions: 0.70 x 7.00 x 5.00 inches
See On Amazon #20
Airmont Products, 5-inch Ceiling Blank-Up Cover with Center Screw, Fits 3-1/4" to 4" Electric Box, Adjustable Bracket for Screw Hole Spacing 1.75" to 3.5", White Metal
Asin: B0CTKV23CL | Model: AP-12078 | PartNumber: AP-12078
Features
- SIZE: These Cover-Up Plates are designed to be used to cover electrical boxes of multiple sizes. With its universal bracket, this plate can be used for screw spaces anywhere between 1.75 inches and 3.5 inches.
- QUALITY AND DURABILITY: These 5-Inch Blank Cover-Up Plates are crafted from Heavy Duty Metal and are built to provide long usage without cracking or fading. They are perfect for covering up mistakes like tears or imperfections, or simply covering unused electrical boxes in the sheetrock or drywall.
- EASY INSTALLATION: These Electrical Box Covers are extremely simple to use. Simply install the universal bracket at the desired screw spacing. Then, secure the plate to the bracket using the single center hole and the included mounting screws.
- NEAT LOOK: With this white Cover-Up Blank Plate your ceiling will look clean, sleek, and modern. Patching your ceiling has never been easier. Instead of wasting time and money repairing drywall and painting, simply install this Blank-Up cover to areas of the wall or ceiling that have been damaged or are unsightly.
- ABOUT US: Airmont Products manufactures a fine line of top-quality electrical supplies. Our Metal Blank Ceiling Covers are especially recognized as being durable, versatile, and easy to install.
- See more on Amazon...
Easy Installation: These Electrical Box Covers Are Extremely Simple To Use. Simply Install The Universal Bracket At The Desired Screw Spacing. Then, Secure The Plate To The Bracket Using The Single Center Hole And The Included Mounting Screws..
About Us: Airmont Products Manufactures A Fine Line Of Top-Quality Electrical Supplies. Our Metal Blank Ceiling Covers Are Especially Recognized As Being Durable, Versatile, And Easy To Install..
Neat Look: With This White Cover-Up Blank Plate Your Ceiling Will Look Clean, Sleek, And Modern. Patching Your Ceiling Has Never Been Easier. Instead Of Wasting Time And Money Repairing Drywall And Painting, Simply Install This Blank-Up Cover To Areas Of The Wall Or Ceiling That Have Been Damaged Or Are Unsightly..
Quality And Durability: These 5-Inch Blank Cover-Up Plates Are Crafted From Heavy Duty Metal And Are Built To Provide Long Usage Without Cracking Or Fading. They Are Perfect For Covering Up Mistakes Like Tears Or Imperfections, Or Simply Covering Unused Electrical Boxes In The Sheetrock Or Drywall..
Brand: Airmont Products | Manufacturer: Airmont Products
Dimensions: 5.00 x 5.00 x 5.00 Inches
See On Amazon #21
DATA COMM Electronics 60-0022-S 2-Gang Low Voltage Mounting Bracket, Black
Asin: B00Z8MZ4CE | Model: 60-0022-S | PartNumber: 60-0022-S | Ean: 0660559015339 | UPC: 660559015339
Features
- Available in 1 and 2 gang options
- Adjusts to fit 1/4 inch to 1 inch thick drywall
- Mounting wings fasten against the back of the drywall as you tighten
- Quick and easy to install - for mounting low voltage cable plates
- Horizontal or vertical mounting
- See more on Amazon...
Mounting Wings Fasten Against The Back Of The Drywall As You Tighten.
Horizontal Or Vertical Mounting.
Quick And Easy To Install - For Mounting Low Voltage Cable Plates.
Adjusts To Fit 1/4 Inch To 1 Inch Thick Drywall.
First Available: 06/02/2020
Brand: DATA COMM | Manufacturer: DATA COMM
Dimensions: 4.20 x 1.80 x 2.50 inches | Weight: 0.08 pounds
Warranty: Datacomm electronics warrants the passive components for a period of (10) years and active components for a period of (2) years from the date of purchase.
See On Amazon #22
Construct Pro Slim Single Gang Open Back Low Voltage Bracket, Each
Asin: B00ARIOXN0 | Ean: 0852659307685 | UPC: 852659307685
Features
- Slim bracket perfect for mounting low-voltage wall-plates to sheetrock, tile, or stucco
- Ideal for home theater & security installation | Suitable for Class 2 low-voltage wiring applications that don t require electrical boxes
- Open back design for cable routing | Rotating clips for attachment to existing wallboards
- Quick & easy to install only a drywall saw & Philips screwdriver needed!
- Size: Single Gang | Color: Orange
- See more on Amazon...
Open Back Design For Cable Routing | Rotating Clips For Attachment To Existing Wallboards.
Size: Single Gang | Color: Orange.
Quick & Easy To Install – Only A Drywall Saw & Philips Screwdriver Needed!.
Ideal For Home Theater & Security Installation | Suitable For Class 2 Low-Voltage Wiring Applications That Don’T Require Electrical Boxes.
Brand: Construct Pro | Manufacturer: Construct Pro
Dimensions: 2.00 x 8.00 x 5.00 inches | Weight: 0.15 pounds
See On Amazon #23
BestMounts - 10 Pack Nail-ON Low Voltage Mounting Brackets 1 Gang Multipurpose New Construction - Drywall Outlet Cable Wall Plate Bracket for Telephone Wire, Network Cable, HDMI, Speaker Wire
Asin: B09SKNPKQR | Model: SG-10-Orange | PartNumber: SG-10-Orange | Ean: 0812326001766 | UPC: 812326001766
Features
- Provide a convenient solution for cable management - BestMounts nail-on, single gang low voltage mounting bracket specifically designed for new construction on wood studs. Seamlessly integrate your cables with the built-in loop
- Flush Wall Plate Mounting Bracket: Allows wall plate to mount flush with wall surface , 25% faster installation over steel or plastic mud rings!
- Ready to install - Experience effortless installation with our ready-to-install nails, conveniently parked in place. With a simple and straightforward process, you can effortlessly attach our low voltage brackets to studs, ensuring a sturdy and reliable foundation
- CONTRACTOR-INSPIRED FEATURES FOR EASY INSTALLATION, Our nail-on drywall bracket is low cost than extension rings or mud rings, compatible with speaker wires, coaxial, HDMI
- Unlock the power of efficiency with our cutting-edge, non-conductive plastic mounting brackets. Crafted specifically for Class 2 low voltage new construction projects, these sleek brackets guarantee a seamless and hassle-free installation
- See more on Amazon...
Ready To Install - Experience Effortless Installation With Our Ready-To-Install Nails, Conveniently Parked In Place. With A Simple And Straightforward Process, You Can Effortlessly Attach Our Low Voltage Brackets To Studs, Ensuring A Sturdy And Reliable Foundation.
Unlock The Power Of Efficiency With Our Cutting-Edge, Non-Conductive Plastic Mounting Brackets. Crafted Specifically For Class 2 Low Voltage New Construction Projects, These Sleek Brackets Guarantee A Seamless And Hassle-Free Installation.
Contractor-Inspired Features For Easy Installation, Our Nail-On Drywall Bracket Is Low Cost Than Extension Rings Or Mud Rings, Compatible With Speaker Wires, Coaxial, Hdmi.
Flush Wall Plate Mounting Bracket: Allows Wall Plate To Mount Flush With Wall Surface , 25% Faster Installation Over Steel Or Plastic Mud Rings!.
Brand: Best Mounts | Manufacturer: Best View Mounts
Dimensions: 1.70 x 5.40 x 2.60 Inches
Warranty: No warranty
See On Amazon #24
iMBAPrice 3 Gang LV3 Low Voltage Wallplate Mounting Bracket - Black
Asin: B00HEVAPM6 | Model: IC-Gang-3 | PartNumber: IC-Gang-3 | Ean: 0617689103214 | UPC: 617689103214
Features
- Non-metallic - better than metal and costs less too!
- For communications, cable TV, computer wiring.
- Mounting wings hold bracket securely against wall when screws are tightened
- Adjusts to fit 1/4 to 1 thick wallboard, paneling, or drywall.
- Bracket is its own template for cut out. D low voltage mounting bracket for existing construction. Non-metallic
- See more on Amazon...
Mounting Wings Hold Bracket Securely Against Wall When Screws Are Tightened.
Bracket Is Its Own Template For Cut Out. D Low Voltage Mounting Bracket For Existing Construction. Non-Metallic.
Adjusts To Fit 1/4" To 1" Thick Wallboard, Paneling, Or Drywall..
For Communications, Cable Tv, Computer Wiring..
Brand: iMBAPrice | Manufacturer: iMBAPrice
See On Amazon #25
(Pack of 100) T4 Stud Box Mounting Bracket for 4" and 4-11/16" Boxes to 2-1/2" and 3-1/2" Studs
Asin: B07XZK33NJ | Model: E-ZMount-100 | PartNumber: E-ZMount-100 | Ean: 0682550998176 | UPC: 682550998176
Features
- Attaches the Outlet Box to a Wood or Metal Stud
- For Use with a 4 and 4-11/16 Outlet Box
- Compatible with 2-1/2 and 3-1/2 Stud Depths
- Support Leg Reduces Box Movement
- Notch in the Bracket Provides Consistent Box Positioning
- See more on Amazon...
Compatible With 2-1/2" And 3-1/2" Stud Depths.
Notch In The Bracket Provides Consistent Box Positioning.
Support Leg Reduces Box Movement.
For Use With A 4" And 4-11/16" Outlet Box.
Brand: DE Supply | Manufacturer: DE Supply
See On Amazon #26
(Pack of 2) Airmont Products AP-12077, 5-inch Ceiling Blank-Up Cover with Center Screw, Fits 3-1/4" to 4" Electric Box, Adjustable Bracket for Screw Hole Spacing 1.75" to 3.5", White Metal
Asin: B0BJY5P7DV | Model: AP-12077 | PartNumber: AP-12077
Features
- SIZE These Cover-Up Plates are designed to be used to cover electrical boxes of multiple sizes. With its universal bracket, this plate can be used for screw spaces anywhere between 1.75 inches and 3.5 inches.
- QUALITY AND DURABILITY These 5-Inch Blank Cover-Up Plates are crafted from Heavy Duty Metal and are built to provide long usage without cracking or fading. They are perfect for covering up mistakes like tears or imperfections, or simply covering unused electrical boxes in the sheetrock or drywall.
- EASY INSTALLATION These Electrical Box Covers are extremely simple to use. Simply install the universal bracket at the desired screw spacing. Then, secure the plate to the bracket using the single center hole and the included mounting screws.
- NEAT LOOK With this white Cover-Up Blank Plate your ceiling will look clean, sleek, and modern. Patching your ceiling has never been easier. Instead of wasting time and money repairing drywall and painting, simply install this Blank-Up cover to areas of the wall or ceiling that have been damaged or are unsightly.
- ABOUT US - Airmont Products manufactures a fine line of top-quality electrical supplies. Our Metal Blank Ceiling Covers are especially recognized as being durable, versatile, and easy to install.
- See more on Amazon...
Easy Installation – These Electrical Box Covers Are Extremely Simple To Use. Simply Install The Universal Bracket At The Desired Screw Spacing. Then, Secure The Plate To The Bracket Using The Single Center Hole And The Included Mounting Screws..
About Us - Airmont Products Manufactures A Fine Line Of Top-Quality Electrical Supplies. Our Metal Blank Ceiling Covers Are Especially Recognized As Being Durable, Versatile, And Easy To Install..
Neat Look – With This White Cover-Up Blank Plate Your Ceiling Will Look Clean, Sleek, And Modern. Patching Your Ceiling Has Never Been Easier. Instead Of Wasting Time And Money Repairing Drywall And Painting, Simply Install This Blank-Up Cover To Areas Of The Wall Or Ceiling That Have Been Damaged Or Are Unsightly..
Quality And Durability – These 5-Inch Blank Cover-Up Plates Are Crafted From Heavy Duty Metal And Are Built To Provide Long Usage Without Cracking Or Fading. They Are Perfect For Covering Up Mistakes Like Tears Or Imperfections, Or Simply Covering Unused Electrical Boxes In The Sheetrock Or Drywall..
Brand: Airmont Products | Manufacturer: Airmont Products
Dimensions: 5.00 x 5.00 x 0.22 Inches
See On Amazon #27
Arlington LVMB1 1-Gang Low Voltage Mounting Bracket for New Construction, 10-Pack
Asin: B000LG5NEQ | Model: LVMB1-10 | PartNumber: LVMB1-10 | Ean: 0783961233440, 0018997143600 | UPC: 018997143600, 783961233440
Features
- Made in USA
- Ul and csa listed
- Approved for use of 3/4-Inch emt
- Adjusts with 1/2 to 5/8-Inch drywall
- Non-conductive, smooth plastic prevents damage to cabling; install wiring without an electrical box
- See more on Amazon...
Approved For Use Of 3/4-Inch Emt.
Non-Conductive, Smooth Plastic Prevents Damage To Cabling; Install Wiring Without An Electrical Box.
Adjusts With 1/2 To 5/8-Inch Drywall.
Ul And Csa Listed.
Brand: ARLINGTON | Manufacturer: Arlington Industries. Inc
Dimensions: 4.15 x 1.90 x 3.14 inches | Weight: 0.85 pounds
See On Amazon #28
BestMounts - 12 Pack Low Voltage Mounting Brackets 1 Gang for Drywall Outlet Cable Pass Through Wall Plates - Cable Wall Plate Bracket for Old Work, Telephone Wire, Network Cable, HDMI, Speaker Wire
Asin: B08BJDV53G | Model: SG-BL-12 | PartNumber: SG-BL-12 | Ean: 0812326008895 | UPC: 812326008895
Features
- Flush Wall Plate Mounting Bracket: The BestMounts single gang low voltage mounting bracket is specifically designed for flush mounting wall plates, allowing them to be installed seamlessly with the wall surface.
- Adjustable Bracket for Optimal Positioning - Our low voltage bracket adjusts to fit various wall thickness, from 1/4-inch to 1-inch thick wall board, paneling, or drywalll, Ideal solution for mounting low voltage wires (phone, internet, TV, video)
- EASY TO INSTALL - Bracket has its own template for cut out , USE 4 Corner holes to MARK WALL OPENING, This low voltage bracket can be installed vertically or horizontally, Ideal for a few renovation projects at home or in the office
- Versatile Compatibility: Our drywall bracket is widely compatible with speaker wires, coaxial, HDMI and data/communication cables, offering versatile installation options for your audio & video system
- Our low voltage mounting bracket comes with a 180-day warranty for quality assurance, and we provide dedicated customer assistance to address any inquiries or issues you may have.
- See more on Amazon...
Easy To Install - Bracket Has Its Own Template For Cut Out , Use 4 Corner Holes To Mark Wall Opening, This Low Voltage Bracket Can Be Installed Vertically Or Horizontally, Ideal For A Few Renovation Projects At Home Or In The Office.
Our Low Voltage Mounting Bracket Comes With A 180-Day Warranty For Quality Assurance, And We Provide Dedicated Customer Assistance To Address Any Inquiries Or Issues You May Have..
Versatile Compatibility: Our Drywall Bracket Is Widely Compatible With Speaker Wires, Coaxial, Hdmi And Data/Communication Cables, Offering Versatile Installation Options For Your Audio & Video System.
Adjustable Bracket For Optimal Positioning - Our Low Voltage Bracket Adjusts To Fit Various Wall Thickness, From 1/4-Inch To 1-Inch Thick Wall Board, Paneling, Or Drywalll, Ideal Solution For Mounting Low Voltage Wires (Phone, Internet, Tv, Video).
Brand: Best Mounts | Manufacturer: Best View Mounts
Dimensions: 1.70 x 5.40 x 2.60 inches
Warranty: 180 days
See On Amazon #29
Arlington LVS1-1 Low Voltage Screw-On Mounting Bracket, 1-Gang
Asin: B003JQL14G | Model: LVS1-1 | PartNumber: LVS1-1 | Ean: 0018997002624, 0018997002655, 0735090122133, 0001899700262, 0013555007202, 5448095491962 | UPC: 018997002624, 013555007202, 018997002655, 735090122133, 001899700262
Features
- Overall Dimensions - 1.61"L x 3.14"W x 5.34"H, Nailing Flange Thickness - 0.090" (Front and Side), Panel Cut Out Dimensions - 2.15" W x 3.60" H.
- Shallow Mount - Only 0.55 Deep (Not Including Stud Side Nail Flange), Minimum Sheetrock or Panel Thickness - 0.45, Side Wall Thickness - 0.080, Gang: 1 Gang.
- Single Gang Open Back Bracket. Commonly Referred to as a Mud Ring. For New Construction Applications. Run More Wire Easier with Brackets vs Boxes.
- Mounts to Wood Studs or Metal Stud with Supplied Screws. Impact Resistant Plastic results in less breakage on Job site. Flange around box supports sheetrock.
- See more on Amazon...
Single Gang Open Back Bracket. Commonly Referred To As A Mud Ring. For New Construction Applications. Run More Wire Easier With Brackets Vs Boxes..
Mounts To Wood Studs Or Metal Stud With Supplied Screws. Impact Resistant Plastic Results In Less Breakage On Job Site. Flange Around Box Supports Sheetrock..
Shallow Mount - Only 0.55" Deep (Not Including Stud Side Nail Flange), Minimum Sheetrock Or Panel Thickness - 0.45", Side Wall Thickness - 0.080", Gang: 1 Gang..
Brand: ARLINGTON | Manufacturer: Arlington Industries
Weight: 0.10 Pounds
Warranty: Arlington fittings are carefully inspected and our manufacturing process is designed to prevent the possibility of a defective product leaving our plant. In the event any of our products are found to be defective, we will replace them with new product free of charge. The time limit for this warranty is one year following the date of sale or one year after the date of installation, whichever is the earlier date. This warranty does not apply when the product is used for any purpose other than the intended use as described in the Arlington literature. This warranty does not apply when the product is used for any installation which would violate the national electrical code or any code which takes precedence in a particular jurisdiction. Labor is not included.
See On Amazon #30
Arlington LV2-1CS Low Voltage Mounting Bracket, 2-Gang, 1-Pack
Asin: B000GAQB0W | Model: LV2-1CS | PartNumber: LV2-1CS
Ean: 5899406083374, 0018997109514, 5509005523859, 7131405016983, 0754335047895, 7257259925728, 7535001014938, 0610373768515, 5448095467929, 7785004522620, 0642008682552
UPC: 754335047895, 642008682552, 018997109514, 610373768515
Features
- Designed to mount wall plates flush
- Horizontal or vertical mounting; UL/CSA listed
- Adjusts to fit 1/4 Inch to 1 Inch thick wall board, paneling or drywall
- 1-pack of Low Voltage Mounting Brackets
- mounting brackets offer specially designed screw holes, for a better looking, easy to install job
- Designed to mount wall plates flush
- Horizontal or vertical mounting; UL/CSA listed
- Adjusts to fit 1/4-Inch to 1-Inch thick wall board, paneling or drywall
- 1-pack of Low Voltage Mounting Brackets
- Mounting brackets offer specially designed screw holes that deliver a better looking, easy to install job
- See more on Amazon...
Adjusts To Fit 1/4 Inch To 1 Inch Thick Wall Board, Paneling Or Drywall.
Mounting Brackets Offer Specially Designed Screw Holes That Deliver A Better Looking, Easy To Install Job.
Horizontal Or Vertical Mounting; Ul/Csa Listed.
Adjusts To Fit 1/4-Inch To 1-Inch Thick Wall Board, Paneling Or Drywall.
Mounting Brackets Offer Specially Designed Screw Holes, For A Better Looking, Easy To Install Job.
Designed To Mount Wall Plates Flush.
1-Pack Of Low Voltage Mounting Brackets.
1-Pack Of Low Voltage Mounting Brackets.
Horizontal Or Vertical Mounting; Ul/Csa Listed.
Brand: ARLINGTON | Manufacturer: Arlington Industries
Dimensions: 0.30 x 5.50 x 4.20 Inches | Weight: 0.30 Pounds
Warranty: Arlington fittings are carefully inspected and our manufacturing process is designed to prevent the possibility of a defective product leaving our plant. In the event any of our products are found to be defective, we will replace them with new product free of charge. The time limit for this warranty is one year following the date of sale or one year after the date of installation, whichever is the earlier date. This warranty does not apply when the product is used for any purpose other than the intended use as described in the Arlington literature. This warranty does not apply when the product is used for any installation which would violate the national electrical code or any code which takes precedence in a particular jurisdiction. Labor is not included.
See On Amazon
Looking For Something Else?
Search