Best Roofing Trusses - Buying Guide
Last Updated: 04/27/2024
Share on
Bestselling Roofing Trusses on Amazon
- QWORK Galvanized 18-Gauge Hurricane Tie, 40 Pack Steel Connector for Roofing Trusses Wood Timber, Re...
- Rasugarlary 16 Pcs Hurricane Tie, 12-Gauge Hurricane Tie for 2x4 Post, Heavy Duty Joist Hangers for ...
- CHENTEEL 20 pcs Hurricane Ties for Rafters,Galvanized Hurricane Straps,18-Gauge Rafter Tie Brackets ...
- Guardian Fall Protection 00815 BOS-T50 Bucket of Safe-Tie - 5 Gallon Bucket, 50 ft. Vertical Lifelin...
- 6 PCS Metal Z Bracket ,for 2x4 Cross Joist and 4x4 Post,Metal Joint Corner Brace Support Pergola Bra...
- MOZCORN Truss Mending Plate 6x12, Pronged Truss Plates with Nail Teeth, Truss Brackets for Roofing W...
- Guardian Fall Protection 2500 Adjustable Roofing Bracket, 10"
- Zeluga 10-240 17 oz. Mag-Hatch Magnetic Faced Roofing Hatchet
- eoere 6 PCS 12" x 6" Pronged Truss Plate Flat Mending Plates Repair Tie Plate Bracket, Galvanized St...
- IMPRESA [2 Pack] Shingle Nail Puller for Roof Shingle Repair - Steel Nail Remover Tool to Easily Rem...
#1
QWORK Galvanized 18-Gauge Hurricane Tie, 40 Pack Steel Connector for Roofing Trusses Wood Timber, Resist High Wind/ Earthquake Forces
Asin: B0CJ2DSX3N | Model: WD15152 | PartNumber: WD15152 | Ean: 0795973616319 | UPC: 795973616319
Features
- Rust-resistant and Reliable: Made of 18 gauge steel, hot-dip galvanized surface, good impact resistance, wear resistance and corrosion resistance
- Connector: Designed to provide a connection between trusses/rafters and wall-top slabs to resist high wind/earthquake forces, efficiently and truly build a protected deck, house lift, pergola or roof by using this pack of typhoon ties.
- Strong Resistance: Hurricane brackets can withstand lateral and uplift loads, ideal for holding joists and rafters together. Mounted in pairs on both sides of rafters/trusses/joists to provide resistance to lifting and lateral forces.
- Easy Installation: Just tie the rafters to the joists or rafters where they should be fixed, and then screw in the screws to complete the installation.
- Thickness: 18 Gauge (1.2mm), screw hole: 4 mm. Package inludes 40 Pcs 18-Gauge Hurricane Tie.
- See more on Amazon...
Strong Resistance: Hurricane Brackets Can Withstand Lateral And Uplift Loads, Ideal For Holding Joists And Rafters Together. Mounted In Pairs On Both Sides Of Rafters/Trusses/Joists To Provide Resistance To Lifting And Lateral Forces..
Thickness: 18 Gauge (1.2Mm), Screw Hole: Φ4 Mm. Package Inludes 40 Pcs 18-Gauge Hurricane Tie..
Easy Installation: Just Tie The Rafters To The Joists Or Rafters Where They Should Be Fixed, And Then Screw In The Screws To Complete The Installation..
Connector: Designed To Provide A Connection Between Trusses/Rafters And Wall-Top Slabs To Resist High Wind/Earthquake Forces, Efficiently And Truly Build A Protected Deck, House Lift, Pergola Or Roof By Using This Pack Of Typhoon Ties..
Brand: QWORK | Manufacturer: QWORK
See On Amazon #2
Rasugarlary 16 Pcs Hurricane Tie, 12-Gauge Hurricane Tie for 2x4 Post, Heavy Duty Joist Hangers for Roofing Trusses Wood Timber Steel Connectors, Black with Screws
Asin: B0CTK52J8L | Model: Black | PartNumber: Black
Features
- STRENGTH 12 GAUGE STEEL: Our hurricane tie is made of 12-gauge carbon steel with black powder coated, high strength and stability, strong and water-resistant, provide long-lasting, reliable support for wood post.
- FOR 2x4WOOD BEAM: The hurricane tie is about 13.5x13.5x2.3cm/5.3x5.3x0.9, suit for connecting 2x4 deck joists (Actual Inner 1.5x3.5).
- MULTI-FUNCTIONAL APPLICATION: Black steel hurricane tie connector for both indoor and outdoor. Suitable for connecting wooden rafters, roof trusses, lumbers, swing set, deck, pergola build and house maintenance, etc.
- EASY TO INSTALL: Each hurricane tie brackets has pre-drilled holes, easy to install(come with screws). Just put the hurricane ties on the joists or rafters, then tighten the screws.
- PACKAGE DETAILS: 16 pcs x angle brackets with screws set. Heavy duty and very solid. Save time and effort with our hurricane tie brackets for wood diy project.
- See more on Amazon...
Multi-Functional Application: Black Steel Hurricane Tie Connector For Both Indoor And Outdoor. Suitable For Connecting Wooden Rafters, Roof Trusses, Lumbers, Swing Set, Deck, Pergola Build And House Maintenance, Etc..
Package Details: 16 Pcs X Angle Brackets With Screws Set. Heavy Duty And Very Solid. Save Time And Effort With Our Hurricane Tie Brackets For Wood Diy Project..
Easy To Install: Each Hurricane Tie Brackets Has Pre-Drilled Holes, Easy To Install(Come With Screws). Just Put The Hurricane Ties On The Joists Or Rafters, Then Tighten The Screws..
For 2X4wood Beam: The Hurricane Tie Is About 13.5X13.5X2.3Cm/5.3X5.3X0.9", Suit For Connecting 2X4 Deck Joists (Actual Inner 1.5X3.5")..
Brand: Rasugarlary | Manufacturer: Rasugarlary
Dimensions: 3.90 x 11.00 x 5.10 inches
See On Amazon #3
CHENTEEL 20 pcs Hurricane Ties for Rafters,Galvanized Hurricane Straps,18-Gauge Rafter Tie Brackets Connectors,Hurricane Clips for Roofing Trusses Wood Timber,Seismic Joist Hangers,Roof Brackets
Asin: B0CB7H8CH2 | Model: Joist Hanger | PartNumber: Joist Hanger
Features
- GALVANIZED JOIST HANGERS :Do you remember hurricane Andrew that hit Homested, Florida in 1992? Hurricane ties for rafters, a solid choice for wind and earthquake resistance. Reinforce the two rafters to improve the overall structural strength, resist the wind and rain, make the building safer. With high-quality galvanized armor, durable and trustworthy. Choose Hurricane Tie for Rafters to like a true knight in shining steel, valiantly supporting your structure.
- EXCLUSIVE DESIGN :The designers added a total of four reinforcement bars, two long and two short, to ensure that the strength of the hurricane metal straps can better reinforce the building and protect your property from strong winds and earthquakes.
- RUSTPROOF AND RELIABLE :The truss brackets is made of 18 gauge high quality heavy duty cold rolled steel, which is strong and durable and will stand the test of time. ZMAX galvanization offers extra corrosion resistance for exterior and treated-wood applications and can effectively connect wooden structures and resist strong wind attacks.
- SIMPLICITY AND EFFICIENCY :Hurricane clips' features a porous design that fits a variety of roofs.Make rafters were held securely in place, no need to replace other brackets frequently,The Galvanized Joist Hanger s simplicity and efficiency add to its allure, performing its duty without demanding attention.
- SIZE :5.3 * 5.3 * 0.05 inches (134 mm * 134 mm * 1.2 mm) and screw hole:0.16 inches ( 4 mm)
- AFTER SALES SERVICE :If you encounter any unsatisfactory issues while using our rafter hanger, please don't hesitate to contact us directly for a replacement or refund. This is a shopping experience without risks.
- See more on Amazon...
🏡【Rustproof And Reliable】:The Truss Brackets Is Made Of 18 Gauge High Quality Heavy Duty Cold Rolled Steel, Which Is Strong And Durable And Will Stand The Test Of Time. Zmax Galvanization Offers Extra Corrosion Resistance For Exterior And Treated-Wood Applications And Can Effectively Connect Wooden Structures And Resist Strong Wind Attacks..
🏡【Size】:5.3 * 5.3 * 0.05 Inches (134 Mm * 134 Mm * 1.2 Mm) And Screw Hole:0.16 Inches (Φ4 Mm).
💞【After Sales Service】:If You Encounter Any Unsatisfactory Issues While Using Our Rafter Hanger, Please Don't Hesitate To Contact Us Directly For A Replacement Or Refund. This Is A Shopping Experience Without Risks..
🏡【Simplicity And Efficiency】:Hurricane Clips' Features A Porous Design That Fits A Variety Of Roofs.Make Rafters Were Held Securely In Place, No Need To Replace Other Brackets Frequently,The Galvanized Joist Hanger’S Simplicity And Efficiency Add To Its Allure, Performing Its Duty Without Demanding Attention..
🏡【Exclusive Design】:The Designers Added A Total Of Four Reinforcement Bars, Two Long And Two Short, To Ensure That The Strength Of The Hurricane Metal Straps Can Better Reinforce The Building And Protect Your Property From Strong Winds And Earthquakes..
Brand: Chenteel | Manufacturer: Chenteel
Dimensions: 2.00 x 2.00 x 2.00 Inches
See On Amazon #4
Guardian Fall Protection 00815 BOS-T50 Bucket of Safe-Tie - 5 Gallon Bucket, 50 ft. Vertical Lifeline Assembly, 5 Temper Reusable Anchor, Safety Harness Kit, Yellow
Asin: B0032U3JXA | Model: 00815 | PartNumber: 00815 | Ean: 0672421008158, 0639738669809, 0012643008152 | UPC: 639738669809, 672421008158, 012643008152
Features
- Safety Kit: Safe-tie Bucket is primarily designed for the safety of roofers and other crew members to help prevent accidental falls. It is perfect for restraint applications in construction work, roofing, thatching, and high-rise window cleaning tasks.
- Comfort: Safe-Tie Bucket undergoes rigorous testing standards to ensure optimum performance every time. Full-body harness with 5 adjustment points, features anti-slip back placard for user comfort. The bucket allows a maximum free fall of only 6 feet
- Shock Absorber: Lifeline assembly comes with an integrated shock absorber that eliminates the need of additional shock-absorbing lanyard. This also means lesser dead weight transferred to the dorsal D-ring which helps in reducing fatigue and increasing comfort for the user
- Safe-Tie Bucket: This Guardian roofing safety kit keeps equipment packed together when traveling to different jobsites. The waterproof bucket has a harness, anchor, and lifeline, made with steel, polyester, and nylon to boost durability.
- Specifications: OSHA, ANSI compliant Qual-Craft fall protection bucket has a capacity of 130 - 310 lbs and weighs 15 LBS. It includes 5 temper reusable anchor, universal velocity harness HUV, vertical lifeline assembly, shock pack, permanently attached positioning device, and 18in. lanyard extension
- See more on Amazon...
Shock Absorber: Lifeline Assembly Comes With An Integrated Shock Absorber That Eliminates The Need Of Additional Shock-Absorbing Lanyard. This Also Means Lesser Dead Weight Transferred To The Dorsal D-Ring Which Helps In Reducing Fatigue And Increasing Comfort For The User.
Specifications: Osha, Ansi Compliant Qual-Craft Fall Protection Bucket Has A Capacity Of 130 - 310 Lbs And Weighs 15 Lbs. It Includes 5 Temper Reusable Anchor, Universal Velocity Harness Huv, Vertical Lifeline Assembly, Shock Pack, Permanently Attached Positioning Device, And 18In. Lanyard Extension.
Safe-Tie Bucket: This Guardian Roofing Safety Kit Keeps Equipment Packed Together When Traveling To Different Jobsites. The Waterproof Bucket Has A Harness, Anchor, And Lifeline, Made With Steel, Polyester, And Nylon To Boost Durability..
Comfort: Safe-Tie Bucket Undergoes Rigorous Testing Standards To Ensure Optimum Performance Every Time. Full-Body Harness With 5 Adjustment Points, Features Anti-Slip Back Placard For User Comfort. The Bucket Allows A Maximum Free Fall Of Only 6 Feet.
Brand: Guardian Fall Protection | Manufacturer: Guardian Fall Protection
Dimensions: 12.20 x 14.90 x 13.00 Inches | Weight: 15.00 Pounds
Warranty: Qualcraft warrants to the purchaser that all products are free from defect in material and workmanship at the time of shipment. Obligation under this warranty is limited to product replacement for the period of two (2) years from the date of installation or use by the owner, provided that this period shall not exceed two (2) years from date of shipment.
See On Amazon #5
6 PCS Metal Z Bracket ,for 2x4 Cross Joist and 4x4 Post,Metal Joint Corner Brace Support Pergola Brackets for Roofing Trusses Wood Timber Connectors , Furniture(Including Screws)
Asin: B0BHLMHJC8 | Model: D-ZS | PartNumber: D-ZS
Features
- 6 PCS Z Brackets Deck Joist Tie Plate
- Fit minimum 2x4 joist and 4x4 post.Applicable beam thickness: 1 -1 inches (38-40mm)
- Length: 3.15(80mm), Height: 1.57(40 mm), Width: 2.95(75 mm), Thickness: 14 Gauge (2 mm)
- Mounting Holes Size: 4mm, 13mm, 10 mm
- Pergola Brackets Post to Beam Connectors. Anti-corrosion, wear resistance, anti-rust. Smooth surface and edges without burrs.
- See more on Amazon...
Length: 3.15"(80Mm), Height: 1.57"(40 Mm), Width: 2.95"(75 Mm), Thickness: 14 Gauge (2 Mm).
Pergola Brackets Post To Beam Connectors. Anti-Corrosion, Wear Resistance, Anti-Rust. Smooth Surface And Edges Without Burrs..
Mounting Holes Size: Φ4mm,Φ13mm,Φ10 Mm.
Fit Minimum 2"X4" Joist And 4"X4" Post.Applicable Beam Thickness: 1½-1⅝ Inches (38-40Mm).
Brand: Riuog | Manufacturer: Riuog
Dimensions: 1.50 x 6.30 x 2.99 Inches
See On Amazon #6
MOZCORN Truss Mending Plate 6x12, Pronged Truss Plates with Nail Teeth, Truss Brackets for Roofing Wood Connector(10 Pcs)
Asin: B0CMV4R9GQ | Model: truss plates | PartNumber: truss plates
Features
- [Rust Resistant] - The truss plate are made of premium steel with HDG finish, anti-rust and resistant-corrosion.
- [Pronged Nail Teeth] - This truss mending plates feature staggered nail pattern for a secure connection that resists splitting.
- [Outdoor Use] - Premium truss brackets are ideal for splicing and for reinforcing all types of wood-to-wood connections outdoors.
- [Bulks of Plates] - The pronged trussplates come with 10 pieces staggered-tooth galvanized plates in package.
- [Standard Demensions] - The rust-proof tie plates are 6 in width and 12 in length, featured with 8mm nail teeth and 0.04 thick steel plate.
- See more on Amazon...
[Outdoor Use] - Premium Truss Brackets Are Ideal For Splicing And For Reinforcing All Types Of Wood-To-Wood Connections Outdoors..
[Standard Demensions] - The Rust-Proof Tie Plates Are 6" In Width And 12" In Length, Featured With 8Mm Nail Teeth And 0.04" Thick Steel Plate..
[Bulks Of Plates] - The Pronged Trussplates Come With 10 Pieces Staggered-Tooth Galvanized Plates In Package..
[Pronged Nail Teeth] - This Truss Mending Plates Feature Staggered Nail Pattern For A Secure Connection That Resists Splitting..
Brand: MOZCORN | Manufacturer: MOZCORN
Dimensions: 0.04 x 12.00 x 6.00 Inches
See On Amazon #7
Guardian Fall Protection 2500 Adjustable Roofing Bracket, 10"
Asin: B0000224N3 | Model: 2500 | PartNumber: 2500
Ean: 7294204760416, 0012643025005, 6998796235550, 5526680006170, 0732454055502, 8853447026209, 0783961000134, 6593856915108, 7147905970144
UPC: 732454055502, 783961000134, 012643025005
Features
- Attaches To The Our Pump Jack System To Offer A Sturdy, Flat Surface To Stand On While Roofing Or Working At Heights
- Durable All Steel Construction With An Adjustable 6 Or 10 Platform,
- Designed To Be Used With 2 x 6 Or 10 Planks
- Bracket Allows For Easy Installation & Removal Without Damaging Shingles
- Compliant With OSHA Regulations
- Durable adjustable roofing bracket
- All-steel construction
- Easy installation
- Designed to be used with 2-by-6-inch or 10-inch planks
- OSHA compliant
- See more on Amazon...
Designed To Be Used With 2" X 6" Or 10" Planks.
Osha Compliant.
All-Steel Construction.
Easy Installation.
Compliant With Osha Regulations.
Durable Adjustable Roofing Bracket.
Bracket Allows For Easy Installation & Removal Without Damaging Shingles.
Designed To Be Used With 2-By-6-Inch Or 10-Inch Planks.
Durable All Steel Construction With An Adjustable 6" Or 10" Platform,.
Brand: Guardian Fall Protection | Manufacturer: Qualcraft
Dimensions: 3.00 x 19.00 x 4.00 Inches | Weight: 2.10 Pounds
Warranty: Warranty.
See On Amazon #8
Zeluga 10-240 17 oz. Mag-Hatch Magnetic Faced Roofing Hatchet
Asin: B0C28S5Y72 | Model: 10-240 | PartNumber: 10-240 | Ean: 0850040910827 | UPC: 850040910827
Features
- The roofing hammer designed for fast application of roofing nails and felt cap
- Beech wood material for shock absorbers and better protection. Curved hand-held for comforftable grip.
- Round steel pin insert make it tighter. Side locking screws prevent the axe from falling off for more safety.
- It includes nail claw, built in utility blade and sliding gauge.
- On the right of the striking face powerful shielded neodymium magnet is located.
- See more on Amazon...
Round Steel Pin Insert Make It Tighter. Side Locking Screws Prevent The Axe From Falling Off For More Safety..
On The Right Of The Striking Face Powerful Shielded Neodymium Magnet Is Located..
It Includes Nail Claw, Built In Utility Blade And Sliding Gauge..
Beech Wood Material For Shock Absorbers And Better Protection. Curved Hand-Held For Comforftable Grip..
Brand: Zeluga | Manufacturer: Zeluga
Dimensions: 13.50 x 6.50 x 2.00 inches | Weight: 1.50 pounds
See On Amazon #9
eoere 6 PCS 12" x 6" Pronged Truss Plate Flat Mending Plates Repair Tie Plate Bracket, Galvanized Steel, Nail Teeth Height 14 mm, Thick 1 mm(19 Gauge), for Roofing Trusses Wood Timber Connectors
Asin: B0CPF4Z95L | Model: MW177-T6 | PartNumber: MW177-T6
Features
- 6 PCS Truss Plate Flat Mending Repair Tie Plate, Carbon Steel + Surface Galvanizing Finished
- Length: 12(300 mm), Width: 6(150 mm), Plate Thickness: 1 mm(19 Gauge), Nail Teeth Height: 9/16(14 mm)
- Weight: 0.77 lb(350 g)-1 piece, 4.83 lb(2.2 kg)-6 pieces
- Staggered nail pattern for a secure connection that resists splitting
- Anti-corrosion, wear resistance, anti-rust. Smooth surface and edges without burrs
- See more on Amazon...
Weight: 0.77 Lb(350 G)-1 Piece, 4.83 Lb(2.2 Kg)-6 Pieces.
Anti-Corrosion, Wear Resistance, Anti-Rust. Smooth Surface And Edges Without Burrs.
Staggered Nail Pattern For A Secure Connection That Resists Splitting.
Length: 12"(300 Mm), Width: 6"(150 Mm), Plate Thickness: 1 Mm(19 Gauge), Nail Teeth Height: 9/16"(14 Mm).
Brand: eoere | Manufacturer: eoere
Dimensions: 0.55 x 12.00 x 6.00 Inches
See On Amazon #10
IMPRESA [2 Pack] Shingle Nail Puller for Roof Shingle Repair - Steel Nail Remover Tool to Easily Remove and Install Roofing Nails - Comfort Hold Grip Shingle Ripper - Safely Replace Roof Shingles
Asin: B0BC2FFYCW | Model: 7139 | PartNumber: 7139 | Ean: 0850042767139 | UPC: 850042767139
Features
- Replacing Shingles Made Easy Avoid the added frustration and cost of damaging surrounding roofing shingles. This roofing removal pry tool makes it a breeze to remove and replace nails from any worn-out composition roofing shingles. Your roof will look brand new in no time
- Ergonomically Designed for Efficiency With a comfort grip handle, repair your shingle roof without fear of hand fatigue. The embedded magnet holds the new nail in place, while the U-shaped cutout makes driving in nails easier. Replacing a roof shingle is now safer than ever before
- Sturdy Construction for Superior Installation This steel roofing nail puller withstands constant hammering. Use this shingle removal tool to help prevent accidental finger strikes. The nail slot allows you to align nails with the proper offset, ensuring a reliable and professional finish
- Value 2-Pack Ditch the flat bar and make your life easier with this shingle repair tool set. These roofer tools 2 packs are a must-have for all your crews roofing projects. With this shingle-saving set complete jobs in half the time
- Safety Orange to Stand Out Stop wasting time and money searching for a lost puller. Find these bold-colored shingle tools easily across the roof or job site. Never mistakenly grab the wrong roof snake tool again and save on your next roofing project
- See more on Amazon...
Sturdy Construction For Superior Installation — This Steel Roofing Nail Puller Withstands Constant Hammering. Use This Shingle Removal Tool To Help Prevent Accidental Finger Strikes. The Nail Slot Allows You To Align Nails With The Proper Offset, Ensuring A Reliable And Professional Finish.
Safety Orange To Stand Out — Stop Wasting Time And Money Searching For A Lost Puller. Find These Bold-Colored Shingle Tools Easily Across The Roof Or Job Site. Never Mistakenly Grab The Wrong Roof Snake Tool Again And Save On Your Next Roofing Project.
Value 2-Pack — Ditch The Flat Bar And Make Your Life Easier With This Shingle Repair Tool Set. These Roofer Tools 2 Packs Are A Must-Have For All Your Crews Roofing Projects. With This Shingle-Saving Set Complete Jobs In Half The Time.
Ergonomically Designed For Efficiency— With A Comfort Grip Handle, Repair Your Shingle Roof Without Fear Of Hand Fatigue. The Embedded Magnet Holds The New Nail In Place, While The U-Shaped Cutout Makes Driving In Nails Easier. Replacing A Roof Shingle Is Now Safer Than Ever Before.
Brand: IMPRESA | Manufacturer: IMPRESA
See On Amazon #11
eoere 10 PCS 6" x 3" Pronged Truss Plate Flat Mending Plates Repair Tie Plate Bracket, Galvanized Steel, Nail Teeth Height 14 mm, Thick 1 mm(19 Gauge), for Roofing Trusses Wood Timber Connectors
Asin: B0CPF2MVKC | Model: MW175-T10 | PartNumber: MW175-T10
Features
- 10 PCS Truss Plate Flat Mending Repair Tie Plate, Carbon Steel + Surface Galvanizing Finished
- Length: 6(150 mm), Width: 3(75 mm), Plate Thickness: 1 mm(19 Gauge), Nail Teeth Height: 9/16(14 mm)
- Weight: 3 oz(87 g)-1 piece, 2.07 lb(0.94 kg)-10 pieces
- Staggered nail pattern for a secure connection that resists splitting
- Anti-corrosion, wear resistance, anti-rust. Smooth surface and edges without burrs
- See more on Amazon...
Weight: 3 Oz(87 G)-1 Piece, 2.07 Lb(0.94 Kg)-10 Pieces.
Anti-Corrosion, Wear Resistance, Anti-Rust. Smooth Surface And Edges Without Burrs.
Staggered Nail Pattern For A Secure Connection That Resists Splitting.
Length: 6"(150 Mm), Width: 3"(75 Mm), Plate Thickness: 1 Mm(19 Gauge), Nail Teeth Height: 9/16"(14 Mm).
Brand: eoere | Manufacturer: eoere
Dimensions: 0.55 x 6.00 x 3.00 Inches
See On Amazon #12
Guardian Fall Protection 2502 Adjustable Heavy Duty Fixed Bracket, for Use with Sideguard Or Material Support On Low Slope Roofs, Powder Coated Red, 6 Inch
Asin: B0000224N1 | Model: 2502 | PartNumber: 2502 | Ean: 0012643025029 | UPC: 012643025029
Features
- Item Weight: 1.93 lb
- Country of Origin: United States
- Color: Powder Coated Red
- Brand name: Qualcraft
- See more on Amazon...
Color: Powder Coated Red.
Brand Name: Qualcraft.
Country Of Origin: United States.
Brand: Guardian Fall Protection | Manufacturer: Qualcraft
Dimensions: 7.82 x 9.39 x 16.96 Inches | Weight: 2.20 Pounds
Warranty: Warranty
See On Amazon #13
Yaocom 50 Pcs Pronged Truss Plate 2 x 6 Inch Roofing Nails Flat Mending Plates Galvanized Steel Repair Tie Roof Bracket Truss Connector with 20 Ga Thick 8 mm Nail Teeth for Wood Timber Roofing Stud
Asin: B0CNRRV7KD | Model: XIE-Yaocom-252 | PartNumber: XIE-Yaocom-252
Features
- Generous Quantity Package: this package includes a generous set of 50 pcs pronged truss plates; This significant number ensures you have sufficient pieces for your construction or repair project, minimizing the hassle of frequent orders
- Ideal Size and Thickness: practicality meets versatility in the ideal size of approximately 2 x 6 inches/ 5 x 15 cm and 0.04 inch / 1mm thick with 0.31 inch / 8 mm nail teeth of these truss brackets; This ideal size makes them suitable for a wide variety of applications
- Robust and Reliable: these truss connectors are constructed using carbon steel, a material well regarded for its strength and durability; The material is enhanced further with a galvanized coating to ensure it is rustproof and provides long lasting functionality
- Staggered Teeth Feature: truss mending plates come with a staggered teeth design; This design offers an ideal grip and improved stability to your structures, enhancing their strength and longevity for long term use
- Versatile Applications: these mending plates are not just strong and reliable, they are also ideally versatile; Thanks to this, they are widely applicable in a wealth of different construction and renovation scenarios, be it commercial or residential projects, suitable for connection of roofs, trusses, wood, furniture and so on
- See more on Amazon...
Robust And Reliable: These Truss Connectors Are Constructed Using Carbon Steel, A Material Well Regarded For Its Strength And Durability; The Material Is Enhanced Further With A Galvanized Coating To Ensure It Is Rustproof And Provides Long Lasting Functionality.
Versatile Applications: These Mending Plates Are Not Just Strong And Reliable, They Are Also Ideally Versatile; Thanks To This, They Are Widely Applicable In A Wealth Of Different Construction And Renovation Scenarios, Be It Commercial Or Residential Projects, Suitable For Connection Of Roofs, Trusses, Wood, Furniture And So On.
Staggered Teeth Feature: Truss Mending Plates Come With A Staggered Teeth Design; This Design Offers An Ideal Grip And Improved Stability To Your Structures, Enhancing Their Strength And Longevity For Long Term Use.
Ideal Size And Thickness: Practicality Meets Versatility In The Ideal Size Of Approximately 2 X 6 Inches/ 5 X 15 Cm And 0.04 Inch / 1Mm Thick With 0.31 Inch / 8 Mm Nail Teeth Of These Truss Brackets; This Ideal Size Makes Them Suitable For A Wide Variety Of Applications.
Brand: Yaocom | Manufacturer: Yaocom
See On Amazon #14
MOZCORN Truss Plate 6x8 Pronged Truss Plates with Nail Teeth Mending Plate for Roofing Wood Connector(10 Pcs)
Asin: B0CG9XL1DL | Model: truss plates | PartNumber: truss plates
Features
- 10 pieces staggered-tooth metal plates,hot dip galvanized
- Staggered nail pattern for a secure connection that resists splitting
- Ideal for splicing and for reinforcing all types of wood-to-wood connections
- Material:galvanized steel, with silver metal luster
- Dimension:6x8x0.35(150x200x9mm),THK:0.04
- See more on Amazon...
Ideal For Splicing And For Reinforcing All Types Of Wood-To-Wood Connections.
Dimension:6X8x0.35"(150X200x9mm),Thk:0.04".
Material:Galvanized Steel, With Silver Metal Luster.
Staggered Nail Pattern For A Secure Connection That Resists Splitting.
First Available: 04/22/2024
Brand: MOZCORN | Manufacturer: MOZCORN
Dimensions: 0.04 x 8.00 x 6.00 Inches
See On Amazon #15
20 Pack 6x4 inch Pronged Truss Plates with 8mm Nail Teeth, Galvanized Steel Flat Mending Plates Repair Tie Plate Bracket Thickness 1mm, for Timber Roofing Wood Truss Connector Plate
Asin: B0CTH2PZQP | Model: Pronged Truss Plates | PartNumber: Pronged Truss Plates
Features
- Dimensions--- The Pronged Truss Plates measures 6 inch x 4 inch with 0.31inch(8mm) Nail Teeth, Thickness 0.04inch(1mm).
- Materials--- The pronged truss plates are made of galvanized steel has the characteristics of corrosion resistance, long service life, high strength and rigidity, which ensure the stability and safety of the roof structure.
- Application--- Used for reinforcing and connecting wooden structures. By reinforcing truss connection points, supporting wooden beams, columns, walls, furniture, etc., stability and strength are provided.
- Installation--- The installation of the Pronged Truss Plate is simple, but attention needs to be paid to the position and angle of the connection points, as well as the tightness of the connection pieces with the wood.
- Package Includes--- 20 pack Flat Mending Plates.
- See more on Amazon...
▶Application--- Used For Reinforcing And Connecting Wooden Structures. By Reinforcing Truss Connection Points, Supporting Wooden Beams, Columns, Walls, Furniture, Etc., Stability And Strength Are Provided..
▶Package Includes--- 20 Pack Flat Mending Plates..
▶Installation--- The Installation Of The Pronged Truss Plate Is Simple, But Attention Needs To Be Paid To The Position And Angle Of The Connection Points, As Well As The Tightness Of The Connection Pieces With The Wood..
▶Materials--- The Pronged Truss Plates Are Made Of Galvanized Steel Has The Characteristics Of Corrosion Resistance, Long Service Life, High Strength And Rigidity, Which Ensure The Stability And Safety Of The Roof Structure..
Brand: JAVOUKA | Manufacturer: JAVOUKA
Dimensions: 0.39 x 0.39 x 0.39 Inches
See On Amazon #16
MOZCORN 40 Pack Truss Plate 4x6 Pronged Truss Plates with Nail Teeth Mending Plate for Roofing Wood Connector(40 Pcs)
Asin: B0CN9NL5MD | Model: truss plates | PartNumber: truss plates
Features
- [Rust Resistant] - The truss plate are made of premium steel with HDG finish, anti-rust and resistant-corrosion.
- [Pronged Nail Teeth] - This nail teeth mending plates feature staggered nail pattern for a secure connection that resists splitting.
- [Outdoor Use] - Premium hardware brackets are ideal for splicing and for reinforcing all types of wood-to-wood connections outdoors.
- Bulks of Plates] - The pronged trussplates come with 40 pieces staggered-tooth metal plates in package.
- [Standard Demensions] - The rust-proof tie plates are 4 in width and 6 in length, featured with 8mm nail teeth and 0.04 thick steel plate.
- See more on Amazon...
[Outdoor Use] - Premium Hardware Brackets Are Ideal For Splicing And For Reinforcing All Types Of Wood-To-Wood Connections Outdoors..
[Standard Demensions] - The Rust-Proof Tie Plates Are 4" In Width And 6" In Length, Featured With 8Mm Nail Teeth And 0.04" Thick Steel Plate..
Bulks Of Plates] - The Pronged Trussplates Come With 40 Pieces Staggered-Tooth Metal Plates In Package..
[Pronged Nail Teeth] - This Nail Teeth Mending Plates Feature Staggered Nail Pattern For A Secure Connection That Resists Splitting..
Brand: MOZCORN | Manufacturer: MOZCORN
Dimensions: 0.04 x 6.00 x 4.00 Inches
See On Amazon #17
eoere 10 PCS 6" x 3" Pronged Truss Plate Flat Mending Plates Repair Tie Plate Bracket, Galvanized Steel, Nail Teeth Height 8mm, for Roofing Trusses Wood Timber Connectors
Asin: B0CNVC69F1 | Model: MW162-T10 | PartNumber: MW162-T10
Features
- Carbon Steel + Galvanized Finished
- Size: 6 x 3, Plate Thickness: 1mm(20 gauge), Nail Teeth Height: 5/16(8mm)
- 10 Pieces Truss Anti-Split Plates Timber Connector Plates
- Weight: 3.2 oz(91 g)-1 piece, 2.09 lb(950 g)-10 pieces
- Staggered nail pattern for a secure connection that resists splitting
- See more on Amazon...
10 Pieces Truss Anti-Split Plates Timber Connector Plates.
Staggered Nail Pattern For A Secure Connection That Resists Splitting.
Weight: 3.2 Oz(91 G)-1 Piece, 2.09 Lb(950 G)-10 Pieces.
Size: 6" X 3", Plate Thickness: 1Mm(20 Gauge), Nail Teeth Height: 5/16"(8Mm).
Brand: eoere | Manufacturer: eoere
Dimensions: 0.35 x 6.00 x 3.00 Inches
See On Amazon #18
MFM Building Product 47733 ShingleStarter 7.2 in x 33.5 ft
Asin: B000HE7RH8 | Model: 47733 | PartNumber: 47733 | Ean: 0725799477337 | UPC: 725799477337
Brand: Mfm Building Product | Manufacturer: Mfm Building Product
Dimensions: 6.50 x 7.90 x 6.70 Inches
See On Amazon #19
eoere 10 PCS 10" x 5" Pronged Truss Plate Flat Mending Plates Repair Tie Plate Bracket, Galvanized Steel, Nail Teeth Height 8 mm, Thickness 1 mm, for Roofing Trusses Wood Timber Connectors
Asin: B0CPPK87VF | Model: MW174-T10 | PartNumber: MW174-T10
Features
- 10 PCS Truss Plate Flat Mending Repair Tie Plate, Carbon Steel + Surface Hot Dip Galvanized
- Length: 10(250 mm), Width: 5(125 mm), Plate Thickness: 1 mm(20 gauge), Nail Teeth Height: 5/16(8 mm)
- Weight: 8.64 oz(245 g)-1 piece, 5.59 lb(2.54 kg)-10 pieces
- Staggered nail pattern for a secure connection that resists splitting
- Anti-corrosion, wear resistance, anti-rust. Smooth surface and edges without burrs
- See more on Amazon...
Weight: 8.64 Oz(245 G)-1 Piece, 5.59 Lb(2.54 Kg)-10 Pieces.
Anti-Corrosion, Wear Resistance, Anti-Rust. Smooth Surface And Edges Without Burrs.
Staggered Nail Pattern For A Secure Connection That Resists Splitting.
Length: 10"(250 Mm), Width: 5"(125 Mm), Plate Thickness: 1 Mm(20 Gauge), Nail Teeth Height: 5/16"(8 Mm).
Brand: eoere | Manufacturer: eoere
Dimensions: 0.35 x 9.84 x 4.92 Inches
See On Amazon #20
6 Pcs Black Flush Inside 45-Degree Plate Connector, 3 x 3 x 5 inches Tie Plate Bracket, 135 Mending Repair Plate Corner Brace,Thickness 1.8 mm Heavy Duty for Roofing Trusses Wood Timber Connectors
Asin: B0CM6CLKGS | Model: CF2604-B-T6 | PartNumber: CF2604-B-T6
Features
- Black Connector plate for 45-degree inside joint.
- Carbon steel Q235B + Surface spray painting.
- Length: 3 (90 mm), Width: 5-1/8(128 mm), Thickness:1.8 mm, 28 Nail Holes Diameter: 13/64(5 mm).
- Staggered nail pattern for a secure connection that resists splitting.
- Anti-corrosion, wear resistance, anti-rust. Smooth surface and edges without burrs.
- See more on Amazon...
Length: 3½ (90 Mm), Width: 5-1/8"(128 Mm), Thickness:1.8 Mm, 28 Nail Holes Diameter: Φ13/64"(5 Mm)..
Anti-Corrosion, Wear Resistance, Anti-Rust. Smooth Surface And Edges Without Burrs..
Staggered Nail Pattern For A Secure Connection That Resists Splitting..
Carbon Steel Q235b + Surface Spray Painting..
Brand: GBGS | Manufacturer: GBGS
Dimensions: 3.54 x 5.04 x 3.54 Inches
See On Amazon #21
PeakWorks Roof Anchor Bracket, Fall Arrest System, Tool Connects to Wood Surfaces with Roofing Harness Safety Kit, ANSI OSHA Compliant, Durable Steel Adjustable Connector, Red, V8229100
Asin: B01HIUADQK | Model: V8229100 | PartNumber: V8229100 | Ean: 0039339302486, 0626053551636 | UPC: 626053551636, 039339302486
Features
- STAY SAFE: Temporary roof anchor bracket meets ANSI Z359.18, CSA Z259.15, and OSHA safety requirements for residential and commercial roofing applications
- REUSABLE ROOFING TOOLS Re-use this roof anchor bracket as part of your fall arrest system or roofing harness safety kit; roof anchor connects to wood surfaces with a screw size of 3 x #10 (32 screws / 16 per side)
- SUPERIOR QUALITY Anchor bracket is made with the quality materials ensuring top strength and durability to stand up to the toughest working environments
- STRONG CAPACITY Hinged roof bracket built with a minimum tensile strength of 5,000 lb. and has a 310 lb. weight capacity; roof harness safety kit
- COMPATIBILITY PeakWorks Roof Anchors are designed and approved for use only with PeakWorks connectors, or with components that are approved by PeakWorks to be compatible with this product
- See more on Amazon...
Superior Quality – Anchor Bracket Is Made With The Quality Materials Ensuring Top Strength And Durability To Stand Up To The Toughest Working Environments.
Compatibility – Peakworks Roof Anchors Are Designed And Approved For Use Only With Peakworks Connectors, Or With Components That Are Approved By Peakworks To Be Compatible With This Product.
Strong Capacity – Hinged Roof Bracket Built With A Minimum Tensile Strength Of 5,000 Lb. And Has A 310 Lb. Weight Capacity; Roof Harness Safety Kit.
Reusable Roofing Tools – Re-Use This Roof Anchor Bracket As Part Of Your Fall Arrest System Or Roofing Harness Safety Kit; Roof Anchor Connects To Wood Surfaces With A Screw Size Of 3" X #10 (32 Screws / 16 Per Side).
Brand: Peakworks | Manufacturer: Peakworks
Dimensions: 0.87 x 14.02 x 3.82 inches | Weight: 1.00 pounds
See On Amazon #22
MFM Building Product Company. 47733 ShingleStarter 7.2 in x 33.5 ft. Packet of 2
Asin: B09775VVGX | Ean: 0343684791353 | UPC: 343684791353
Brand: Mfm Building Product | Manufacturer: Mfm Building Product
See On Amazon #23
MOZCORN Truss Plate 4x4 Pronged Truss Plates with Nail Teeth Steel Mending Plate for Roofing Wood Connector(20 Pcs)
Asin: B0CG9YCTXN | Model: truss plates | PartNumber: truss plates
Features
- 20 pieces staggered-tooth metal plates,hot dip galvanized
- Staggered nail pattern for a secure connection that resists splitting
- Ideal for splicing and for reinforcing all types of wood-to-wood connections
- Material:galvanized steel, with silver metal luster
- Dimension:4x4x0.35(100x100x9mm),THK:0.035
- See more on Amazon...
Ideal For Splicing And For Reinforcing All Types Of Wood-To-Wood Connections.
Dimension:4X4x0.35"(100X100x9mm),Thk:0.035".
Material:Galvanized Steel, With Silver Metal Luster.
Staggered Nail Pattern For A Secure Connection That Resists Splitting.
Brand: MOZCORN | Manufacturer: MOZCORN
Dimensions: 0.04 x 4.00 x 4.00 Inches
See On Amazon #24
AJC Hatchet MWT-005-MH 17oz Magnet Roofing Hatchet
Asin: B005HYYN8E | Model: MWT-005-MH | PartNumber: MWT-005-MH | Ean: 0606295003513, 0733353764809 | UPC: 733353764809, 606295003513
Available In A 7Oz Size.
Built-In Utility Blade.
Brand: AJC | Manufacturer: MIDWEST TOOL & CUTLERY CO
Dimensions: 13.50 x 6.50 x 2.00 inches | Weight: 1.06 pounds
See On Amazon #25
meite PW2638 Pneumatic Heavy Duty Medium Crown Stapler (Type P) Air 16 Gauge 1" Wide Crown 5/8" to 1-1/2" Length Stapler for Truss Assembly, Roofing, Sheathing
Asin: B06W2LTB49 | Model: PW2638 | PartNumber: PW2638 | Ean: 6926857710593
Features
- [Compatible Fasteners] Compatible with 16 Gauge 1"(26.4 mm) wide crown staples from 5/8" 1-1/2" P series staples, similar to Senco P Series. Compatible Fastener: Please search for ASIN B0B3ML6JQW to order
- [Safety Lock] Prevents accidental firing for safety when not being used.
- [Built to Last] High strength composite magazines provide high durability. Excellent firing valve design makes the tool fast, powerful, efficient.
- [Applications] Ideal for Designed for heavy duty jobs such as window trimming, building components, lathing, foam board insulation, house wrap, wood fencing, truss assembly, roofing, sheathing, furniture framing, cabinet frames, pallets, and general construction
- [Comfortable Grip] Designed to be user-friendly, its comfortable rubber grip can reduce vibration and fatigue and increase productivity.
- See more on Amazon...
[Built To Last] High Strength Composite Magazines Provide High Durability. Excellent Firing Valve Design Makes The Tool Fast, Powerful, Efficient..
[Comfortable Grip] Designed To Be User-Friendly, Its Comfortable Rubber Grip Can Reduce Vibration And Fatigue And Increase Productivity..
[Applications] Ideal For Designed For Heavy Duty Jobs Such As Window Trimming, Building Components, Lathing, Foam Board Insulation, House Wrap, Wood Fencing, Truss Assembly, Roofing, Sheathing, Furniture Framing, Cabinet Frames, Pallets, And General Construction.
[Safety Lock] Prevents Accidental Firing For Safety When Not Being Used..
Brand: meite | Manufacturer: Guangdong meite Mechanical CO., LTD
Dimensions: 4.00 x 14.00 x 11.50 Inches | Weight: 7.43 Pounds
See On Amazon #26
PeakWorks Fall Protection Roofer's Kit, Complete Safety Gear for Roofing with Universal Fit Harness, Rope Grab, 50' Vertical Lifeline and Roof Bracket, White/Green, OSHA & ANSI Compliant, V8257275
Asin: B01CJAPYD6 | Model: RK6-50 | PartNumber: RK6-50 | Ean: 0626053560751 | UPC: 626053560751
Features
- FULL FALL PROTECTION SET: This combo kit includes a complete roofer fall protection system and comes included with all the necessary gear to be OSHA compliant, while meeting all the new OSHA residential construction safety regulations.
- SAFETY HARNESS FEATURES: The full body harness directs body weight load through the shoulder straps and around the thighs, providing light, comfortable support without it feeling restrictive. This universal size, class A harness meets ANSI and OSHA standards and is CSA certified.
- ROPE GRAB FEATURES: The manual rope grab features an integral 3 ft shock absorbing lanyard designed to reduce impact and minimize injury. Rope grab with shock absorber is permanently attached to the vertical life line and meets ANSI and OSHA standards.
- VERTICAL LIFELINE FEATURES: The 5/8 thick, 50 ft long lifeline provides enough rope for most roofing applications. The snap hook on one end makes it easy to use and protects workers from falling hazards on the job.
- ROOF BRACKET FEATURES: The reusable roof bracket offers a 5000 lb. breaking strength for 1 user, and has a hinge design for easy installation on any roof peak angles.
- See more on Amazon...
Rope Grab Features: The Manual Rope Grab Features An Integral 3 Ft Shock Absorbing Lanyard Designed To Reduce Impact And Minimize Injury. Rope Grab With Shock Absorber Is Permanently Attached To The Vertical Life Line And Meets Ansi And Osha Standards..
Roof Bracket Features: The Reusable Roof Bracket Offers A 5000 Lb. Breaking Strength For 1 User, And Has A Hinge Design For Easy Installation On Any Roof Peak Angles..
Vertical Lifeline Features: The 5/8” Thick, 50 Ft Long Lifeline Provides Enough Rope For Most Roofing Applications. The Snap Hook On One End Makes It Easy To Use And Protects Workers From Falling Hazards On The Job..
Safety Harness Features: The Full Body Harness Directs Body Weight Load Through The Shoulder Straps And Around The Thighs, Providing Light, Comfortable Support Without It Feeling Restrictive. This Universal Size, Class A Harness Meets Ansi And Osha Standards And Is Csa Certified..
Brand: Peakworks | Manufacturer: Peakworks
Weight: 14.00 Pounds
See On Amazon #27
MOZCORN Truss Mending Plate 5x10 Pronged Truss Plates with Nail Teeth, Rafter to Truss Wood Connector for Roofing System(10 Pcs)
Asin: B0CWPH92F2 | Model: truss plates | PartNumber: truss plates
Features
- [Rust Resistant] - These truss mending plates are made of premium steel with HDG finish, anti-rust and resistant-corrosion.
- [Pronged Nail Teeth] - This steel mending plates feature staggered nail pattern for a secure connection that resists splitting.
- [Outdoor Use] - Premium truss brackets are ideal for splicing and for reinforcing all types of wood-to-wood connections outdoors.
- [Bulks of Plates] - The pronged trussplates come with 10 pieces staggered-tooth galvanized plates in package.
- [Standard Demensions] - The rust-proof tie plates are 5 in width and 10 in length, featured with 8mm nail teeth and 0.04 thick steel plate.
- See more on Amazon...
[Outdoor Use] - Premium Truss Brackets Are Ideal For Splicing And For Reinforcing All Types Of Wood-To-Wood Connections Outdoors..
[Standard Demensions] - The Rust-Proof Tie Plates Are 5" In Width And 10" In Length, Featured With 8Mm Nail Teeth And 0.04" Thick Steel Plate..
[Bulks Of Plates] - The Pronged Trussplates Come With 10 Pieces Staggered-Tooth Galvanized Plates In Package..
[Pronged Nail Teeth] - This Steel Mending Plates Feature Staggered Nail Pattern For A Secure Connection That Resists Splitting..
First Available: 04/22/2024
Brand: MOZCORN | Manufacturer: MOZCORN
Dimensions: 0.04 x 10.00 x 5.00 Inches
See On Amazon #28
EZBUILDER 50 Structurally Stronger Truss Design Shed Builds 6in - 14in Widths Any Length Storage Garage Playhouse Easy Framing Kit 2x4 Basic Barn Roof Wood NOT Included
Asin: B08YC4SDDS | Ean: 0870263004493 | UPC: 870263004493
Features
- 50% STONGER - Have you tried a framer kit from the other guys? Did the brackets bend when you flipped it over? EZBUILDER has the solution! Now 50% stronger, galvanized steel brackets make your build a breeze. Multiple screw points and reinforced truss design provide you with superior strength to your frame.
- EZ MITER TEMPLATE INCLUDED Only provided by EZBUILDER. Square cuts are weak. EZ Miter, Patent Pending, Reusable Template is a sturdy guide, to make the cuts easy!
- YOU PICK SIZE AND FINISH - Fully customizable size and finish! Make your new She Shed match your house. Better yet, build a small EZ shed to hide your garbage cans!
- NO CONTRACTORS NEEDED Perfect easy weekend DIY project, build whatever size you need! 1 kit for a 7 x8 , 2 kits for 8 x10 , and 3 kits for a 10 x22 .
- LIFETIME WARRANTY - Wood and finish materials are NOT included. One EZBUILDER Peak framing kit includes: 24 Steel angles, 12 Steel base plates, 4 Door Header Brackets, an EZ Miter Template, and easy-to-follow plans.
- See more on Amazon...
You Pick Size And Finish - Fully Customizable Size And Finish! Make Your New She Shed Match Your House. Better Yet, Build A Small Ez Shed To Hide Your Garbage Cans!.
Lifetime Warranty - Wood And Finish Materials Are Not Included. One Ezbuilder Peak Framing Kit Includes: 24 Steel Angles, 12 Steel Base Plates, 4 Door Header Brackets, An Ez Miter Template, And Easy-To-Follow Plans..
No Contractors Needed – Perfect Easy Weekend Diy Project, Build Whatever Size You Need! 1 Kit For A 7’X8’, 2 Kits For 8’X10’, And 3 Kits For A 10’X22’..
Ez Miter Template Included – Only Provided By Ezbuilder. Square Cuts Are Weak. Ez Miter, Patent Pending, Reusable Template Is A Sturdy Guide, To Make The Cuts Easy!.
Brand: EZBUILDER | Manufacturer: New England Outdoor Products
See On Amazon #29
Roofing Shingles (Brown 3-Tab)
Asin: B085WK6XXH | Model: Owens Corning | PartNumber: Owens Corning | Ean: 0665355987750 | UPC: 665355987750
Features
- NOTE: Listing is for 8 Brown 3-Tab Shingles, This is NOT a full bundle of shingles. Will Cover Approximately 10 Square Feet of Roof. Each Shingle is 36 by 12
- These Shingles Are Guaranteed To Withstand 60 MPH Winds.
- Great Amount For Replacing Missing Shingles or Finishing Small Roofing Project.
- Durable Asphalt Shingles That Will Protect Homes and Sheds From Severe Weather.
- Adds Color and Character To Any Roof.
- See more on Amazon...
Great Amount For Replacing Missing Shingles Or Finishing Small Roofing Project..
Adds Color And Character To Any Roof..
Durable Asphalt Shingles That Will Protect Homes And Sheds From Severe Weather..
These Shingles Are Guaranteed To Withstand 60 Mph Winds..
Brand: Owens Corning | Manufacturer: Owens Corning
See On Amazon #30
Tie Down 13882 El Burro Shingle Shovel, Stripper, Roof Tear Off and Nail Removal Tool
Asin: B09B711FP9 | Model: 13882 | PartNumber: 13882 | Ean: 0081628138825 | UPC: 081628138825
Features
- [LIGHTWEIGHT & PORTABLE] Standing nearly 4' tall, the El Burro Shingle Shovel is lightweight & easy to handle. Its compact size and ergonomic design provide optimal maneuverability, enabling you to work tight spaces with precision.
- [PERFORMANCE] Designed to withstand the rigors of commercial roofing projects, the El Burro Shingle Shovel delivers exceptional performance. Tackle the toughest shingle removal job with long-lasting steel construction.
- [DURABLE] This tool is built to withstand the demands of rigorous roofing work, ensuring longevity and reliability.
- [COMFORTABLE] The shingle shovel features a heat-treated steel D-grip handle that provides a comfortable & secure grip. This ergonomic handle design reduces hand fatigue & allows for extended periods of use, enhancing efficiency on the job.
- [REMOVAL] The El Burro Shingle Shovel by Tie Down sets the standard for efficient and effortless shingle removal. Its sturdy and dependable design makes it the go-to choice for professionals in both commercial and residential roofing applications.
- See more on Amazon...
[Durable] This Tool Is Built To Withstand The Demands Of Rigorous Roofing Work, Ensuring Longevity And Reliability..
[Removal] The El Burro Shingle Shovel By Tie Down Sets The Standard For Efficient And Effortless Shingle Removal. Its Sturdy And Dependable Design Makes It The Go-To Choice For Professionals In Both Commercial And Residential Roofing Applications..
[Comfortable] The Shingle Shovel Features A Heat-Treated Steel D-Grip Handle That Provides A Comfortable & Secure Grip. This Ergonomic Handle Design Reduces Hand Fatigue & Allows For Extended Periods Of Use, Enhancing Efficiency On The Job..
[Performance] Designed To Withstand The Rigors Of Commercial Roofing Projects, The El Burro Shingle Shovel Delivers Exceptional Performance. Tackle The Toughest Shingle Removal Job With Long-Lasting Steel Construction..
Brand: Tie Down | Manufacturer: Tie Down
Dimensions: 12.00 x 47.50 x 7.00 Inches
See On Amazon
Looking For Something Else?
Search