Best Spiral Flute Taps - Buying Guide
Last Updated: 04/28/2024
Share on
Bestselling Spiral Flute Taps on Amazon
- Yakamoz 9pcs Machine Screw Tap Set Titanium Spiral Flute Drill Taps Metric M2 M2.5 M3 M4 M5 M6 M8 M1...
- uxcell 1/4"-20 BSW Spiral Flute Thread Tap, Machine Threading Tap HSS-Cobalt Uncoated, Round Shank w...
- YG-1 - F8445 F8 Series Vanadium Alloy HSS Spiral Flute Tap, TiN Coated, Round Shank with Square End,...
- YG-1 - F8403 F8 Series Vanadium Alloy HSS Spiral Flute Tap, TiN Coated, Round Shank with Square End,...
- uxcell M3 x 0.5 Spiral Flute Thread Tap, Metric Machine Threading Tap HSS Nitriding Coated, Round Sh...
- uxcell Spiral Flute Threading Tap 1/2-13 UNC, HSS (High Speed Steel) Uncoated Machine Thread Screw T...
- Rocaris 9 Pack of M2 M2.5 M3 M4 M5 M6 M8 M10 M12 Titanium Coated HSS Spiral Flute Metric Taps Set
- YG-1 - F8405 F8 Series Vanadium Alloy HSS Spiral Flute Tap, TiN Coated, Round Shank with Square End,...
- YG-1 F8 Series Vanadium Alloy HSS Spiral Flute Tap, TiN Coated, Round Shank with Square End, Bottomi...
- YG-1 - F4343 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End...
#1
Yakamoz 9pcs Machine Screw Tap Set Titanium Spiral Flute Drill Taps Metric M2 M2.5 M3 M4 M5 M6 M8 M10 M12 Thread Tapping Tool
Asin: B08Z3LDLYZ | Model: GY0466 | PartNumber: GY0466
Features
- Perfect for cutting and renewing external and internal threads to exact standards. 9 Different Sizes: M2 M2.5 M3 M4 M5 M6 M8 M10 M12
- Designed to cut threads for standard-sized screws, clear and tidy, no burr, provide rapid chip removal for efficient threading.
- Spiral Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and not easily broken tap.
- Made from high speed steel 6542 with titanium coating for high wear and heat resistant, durable and has long service life.
- High speed steel 6542 material suitable for drilling tapping cutting on light metal aluminum board, iron plate, ordinary stainless steel and other hard materials. (Not HSS4241 Material)
- See more on Amazon...
Spiral Tap The Crumbs Into A Spiral Up Chip Evacuation, It Is More Suitable For The Processing Of Blind Holes And Not Easily Broken Tap..
High Speed Steel 6542 Material Suitable For Drilling Tapping Cutting On Light Metal Aluminum Board, Iron Plate, Ordinary Stainless Steel And Other Hard Materials. (Not Hss4241 Material).
Made From High Speed Steel 6542 With Titanium Coating For High Wear And Heat Resistant, Durable And Has Long Service Life..
Designed To Cut Threads For Standard-Sized Screws, Clear And Tidy, No Burr, Provide Rapid Chip Removal For Efficient Threading..
Brand: YAKAMOZ | Manufacturer: Yakamoz
Dimensions: 0.43 x 5.51 x 3.15 Inches
See On Amazon #2
uxcell 1/4"-20 BSW Spiral Flute Thread Tap, Machine Threading Tap HSS-Cobalt Uncoated, Round Shank with Square End, H2 Tolerance
Asin: B091LK94D2 | Model: a20010400ux0090 | PartNumber: a20010400ux0090
Features
- Tap Size: 1/4"-20 BSW thread, H2 tolerance. Spiral flute design, upward chip removal. Right hand thread cutting, clear threads without burrs, fast tapping with accuracy.
- Material and Finish: M35 cobalt high-speed steel tool (5% Co) is with high hardness (up to around 67HRC) and toughness for wear resistance. Features just the base substrate without any additional coatings, great for wide ranges of applications.
- Applications: Suitable for processing blind holes and sticky materials. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc.
- Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps.
- Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause damage to the tap due to uneven force.
- See more on Amazon...
Applications: Suitable For Processing Blind Holes And Sticky Materials. Great For Drilling And Tapping Aluminum, Die Steel, Stainless Steel, Bronze, Hard Plastics, Etc..
Tips: Machine Taps Are Suggested To Be Used With Tap Collets With Overload Protection. Hand Use Is Easy To Cause Damage To The Tap Due To Uneven Force..
Easy To Use: Used On Drilling Machines, Tapping Machines, Cnc And Milling Machines. Use With Tapping Oil To Get Higher Quality Threads And More Durable Taps..
Material And Finish: M35 Cobalt High-Speed Steel Tool (5% Co) Is With High Hardness (Up To Around 67Hrc) And Toughness For Wear Resistance. Features Just The Base Substrate Without Any Additional Coatings, Great For Wide Ranges Of Applications..
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 Pounds
See On Amazon #3
YG-1 - F8445 F8 Series Vanadium Alloy HSS Spiral Flute Tap, TiN Coated, Round Shank with Square End, Bottoming Chamfer, 5/16"-18 Thread Size, H5 Tolerance
Asin: B00F8TYF2C | Model: F8445 | PartNumber: F8445
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 0.6875-inches thread length
- See more on Amazon...
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
0.6875-Inches Thread Length.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Titanium Nitride Coatings Add A Hard Layer Of Gold-Colored Ceramic To The Surface That Extends Tool Life And Permits Faster Cutting Speeds Than Uncoated Tools.
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.10 Pounds
See On Amazon #4
YG-1 - F8403 F8 Series Vanadium Alloy HSS Spiral Flute Tap, TiN Coated, Round Shank with Square End, Bottoming Chamfer, 1/4"-20 Thread Size, H3 Tolerance
Asin: B00F8TXMKI | Model: F8403 | PartNumber: F8403 | Ean: 5899405984351
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 0.625-inches thread length
- See more on Amazon...
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
0.625-Inches Thread Length.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Titanium Nitride Coatings Add A Hard Layer Of Gold-Colored Ceramic To The Surface That Extends Tool Life And Permits Faster Cutting Speeds Than Uncoated Tools.
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.07 Pounds
See On Amazon #5
uxcell M3 x 0.5 Spiral Flute Thread Tap, Metric Machine Threading Tap HSS Nitriding Coated, Round Shank with Square End, H2 Tolerance, 2pcs
Asin: B097666SK2 | Model: a20010400ux0067 | PartNumber: a20010400ux0067
Features
- Tap Size: M3 x 0.5 thread, H2 tolerance. Spiral flute design, upward chip removal. Right hand thread cutting, clear threads without burrs, fast tapping with accuracy.
- Material and Finish: High-speed steel tool is with high hardness and toughness for wear resistance, good for general purpose applications. Features nitriding coated surface for rust prevention and long service life.
- Applications: Suitable for processing blind holes and sticky materials. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc.
- Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps.
- Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause damage to the tap due to uneven force.
- See more on Amazon...
Applications: Suitable For Processing Blind Holes And Sticky Materials. Great For Drilling And Tapping Aluminum, Die Steel, Stainless Steel, Bronze, Hard Plastics, Etc..
Tips: Machine Taps Are Suggested To Be Used With Tap Collets With Overload Protection. Hand Use Is Easy To Cause Damage To The Tap Due To Uneven Force..
Easy To Use: Used On Drilling Machines, Tapping Machines, Cnc And Milling Machines. Use With Tapping Oil To Get Higher Quality Threads And More Durable Taps..
Material And Finish: High-Speed Steel Tool Is With High Hardness And Toughness For Wear Resistance, Good For General Purpose Applications. Features Nitriding Coated Surface For Rust Prevention And Long Service Life..
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 Pounds
See On Amazon #6
uxcell Spiral Flute Threading Tap 1/2-13 UNC, HSS (High Speed Steel) Uncoated Machine Thread Screw Tap 3 Flutes Tapping Tool H2 Tolerance
Asin: B09JBN84H1 | Model: a21071300ux0334 | PartNumber: a21071300ux0334
Features
- Tap Size: 1/2-13 UNC thread, H2 thread tolerance grade. Spiral flute design, upward chip removal. Right hand thread cutting, clear threads, fast tapping with accuracy.
- Material and Finish: High speed steel tool is with high hardness and toughness, heat resistance and wear resistance. Features the base substrate without any coatings. Suitable for general purpose thread tapping.
- Applications: Suitable for processing blind holes and sticky materials. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc.
- Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps.
- Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause breakage to the tap due to uneven force.
- See more on Amazon...
Applications: Suitable For Processing Blind Holes And Sticky Materials. Great For Drilling And Tapping Aluminum, Die Steel, Stainless Steel, Bronze, Hard Plastics, Etc..
Tips: Machine Taps Are Suggested To Be Used With Tap Collets With Overload Protection. Hand Use Is Easy To Cause Breakage To The Tap Due To Uneven Force..
Easy To Use: Used On Drilling Machines, Tapping Machines, Cnc And Milling Machines. Use With Tapping Oil To Get Higher Quality Threads And More Durable Taps..
Material And Finish: High Speed Steel Tool Is With High Hardness And Toughness, Heat Resistance And Wear Resistance. Features The Base Substrate Without Any Coatings. Suitable For General Purpose Thread Tapping..
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 Pounds
See On Amazon #7
Rocaris 9 Pack of M2 M2.5 M3 M4 M5 M6 M8 M10 M12 Titanium Coated HSS Spiral Flute Metric Taps Set
Asin: B08F2Q3BYL | Model: Rocaris | PartNumber: Rocaris | Ean: 0194230309207 | UPC: 194230309207
Features
- - These taps are made from high speed steel 6542 and surface is coated with titanium for high hardness and rust resistance.
- - There are total 9 pieces of taps in different sizes from M2 to M12 that you can use for tapping various threads.
- - Taps are designed with spiral flutes is conducive to remove crumbs, not easily broken tap.
- - They are used to cut new threads or repair damaged threads, you will have a smooth tapping experience with them.
- - These HSS taps are great tools used to create screw threads, to cut or form the female portion of the mating pair.
- See more on Amazon...
- Taps Are Designed With Spiral Flutes Is Conducive To Remove Crumbs, Not Easily Broken Tap..
- These Hss Taps Are Great Tools Used To Create Screw Threads, To Cut Or Form The Female Portion Of The Mating Pair..
- They Are Used To Cut New Threads Or Repair Damaged Threads, You Will Have A Smooth Tapping Experience With Them..
- There Are Total 9 Pieces Of Taps In Different Sizes From M2 To M12 That You Can Use For Tapping Various Threads..
Brand: Rocaris | Manufacturer: Rocaris
Weight: 0.22 Pounds
See On Amazon #8
YG-1 - F8405 F8 Series Vanadium Alloy HSS Spiral Flute Tap, TiN Coated, Round Shank with Square End, Bottoming Chamfer, 1/4"-20 Thread Size, H5 Tolerance
Asin: B00F8TXV8G | Model: F8405 | PartNumber: F8405 | Ean: 5899405992561
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 0.625-inches thread length
- See more on Amazon...
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
0.625-Inches Thread Length.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Titanium Nitride Coatings Add A Hard Layer Of Gold-Colored Ceramic To The Surface That Extends Tool Life And Permits Faster Cutting Speeds Than Uncoated Tools.
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.04 Pounds
See On Amazon #9
YG-1 F8 Series Vanadium Alloy HSS Spiral Flute Tap, TiN Coated, Round Shank with Square End, Bottoming Chamfer, 10-24 Thread Size, H3 Tolerance
Asin: B00F8TX3WA | Model: F8323 | PartNumber: F8323
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 0.5-inches thread length
- See more on Amazon...
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
0.5-Inches Thread Length.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Titanium Nitride Coatings Add A Hard Layer Of Gold-Colored Ceramic To The Surface That Extends Tool Life And Permits Faster Cutting Speeds Than Uncoated Tools.
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.01 Pounds
See On Amazon #10
YG-1 - F4343 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 10-32 Thread Size, H3 Tolerance
Asin: B00F8T4Z18 | Model: F4343 | PartNumber: F4343 | Ean: 7241871141567
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 0.5-inches thread length
- See more on Amazon...
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
0.5-Inches Thread Length.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.00 pounds
See On Amazon #11
Wolfride Spiral Flute Tap Set Metric and Standard Thread Tap Drill Bits M3 M4 M5 M6 M8 M10 M12 (7pcs)
Asin: B0BWXNHF41 | Model: SFT-01 | PartNumber: SFT-01
Features
- Made from HSS 6542, treated with nitriding technique, up rust resistance.
- Size: M3*0.5, M4*0.7, M5*0.8, M6*1.0, M8*1.25, M10*1.5, M12*1.75, standard coarse thread.
- Spiral flutes, fast chip removal, can tap to the bottom of the blind hole.
- Suitable for low-carbon steel, thin stainless steel, aluminium and so on, not for high hardness material such as High-Carbon Steel, etc.
- Used on drilling machines, tapping machines, CNC and milling machines, not for hand electric drill.
- See more on Amazon...
Spiral Flutes, Fast Chip Removal, Can Tap To The Bottom Of The Blind Hole..
Used On Drilling Machines, Tapping Machines, Cnc And Milling Machines, Not For Hand Electric Drill..
Suitable For Low-Carbon Steel, Thin Stainless Steel, Aluminium And So On, Not For High Hardness Material Such As High-Carbon Steel, Etc..
Size: M3*0.5, M4*0.7, M5*0.8, M6*1.0, M8*1.25, M10*1.5, M12*1.75, Standard Coarse Thread..
Brand: Wolfride | Manufacturer: Wolfride
See On Amazon #12
uxcell M5 x 0.8 Spiral Flute Tap and 4.2mm Twist Drill Bit Set, Metric M35 Cobalt High Speed Steel Machine Threading Screw Thread Tap Tool for Stainless Steel
Asin: B09TVFX552 | Model: a22010500ux0465 | PartNumber: a22010500ux0465
Features
- Tap and Drill Bit: Tap thread size: M5 x 0.8, drill bit diameter: 4.2mm / 0.17". Cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance.
- Spiral Flute Tap: Spiral flute design, upward chip removal, right hand thread cutting, fast tapping with accuracy. Suitable for processing blind holes and sticky materials, and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc.
- Twist Drill Bit: Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches. Chips are not easy to stick to the tool.
- Usage of Tap: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection.
- Tips of Drill Bit: Suitable lubricant is conducive to cutting or cooling, making cutting easier, improving smoothness and dimensional accuracy. Select an appropriate feed rate and cutting speed to improve the tool life.
- See more on Amazon...
Twist Drill Bit: Spiral Chip Space Design For Fast And Clean Chip Removal. Sharp Cutting Edge Provides Smooth Cutting And No Glitches. Chips Are Not Easy To Stick To The Tool..
Tips Of Drill Bit: Suitable Lubricant Is Conducive To Cutting Or Cooling, Making Cutting Easier, Improving Smoothness And Dimensional Accuracy. Select An Appropriate Feed Rate And Cutting Speed To Improve The Tool Life..
Usage Of Tap: Used On Drilling Machines, Tapping Machines, Cnc And Milling Machines. Use With Tapping Oil To Get Higher Quality Threads And More Durable Taps. Machine Taps Are Suggested To Be Used With Tap Collets With Overload Protection..
Spiral Flute Tap: Spiral Flute Design, Upward Chip Removal, Right Hand Thread Cutting, Fast Tapping With Accuracy. Suitable For Processing Blind Holes And Sticky Materials, And Tapping Aluminum, Die Steel, Stainless Steel, Bronze, Hard Plastics, Etc..
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 Pounds
See On Amazon #13
YG-1 - F4283 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 8-32 Thread Size, H3 Tolerance
Asin: B00F8T4BXU | Model: F4283 | PartNumber: F4283
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 0.375-inches thread length
- See more on Amazon...
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
0.375-Inches Thread Length.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.00 Pounds
See On Amazon #14
MaxTool 3/4-10 Spiral Flute Taps HSS M2 Thread Taps 10 TPI FULLY GROUND RIGHT HAND; SFF02W02R48
Asin: B07TZCRTMM | Ean: 0634301937590 | UPC: 634301937590
Features
- The premium high speed steel M2 material provides long tool life
- Normal Diameter: 3/4; Pitch: 10 TPI
- Suit for threading blind holes in steel and Non-Ferrous material; It can remove chip easily from holes; not suit for cast iron
- The round shank with square driver makes the taps suitable for hand or power-driven applications
- The uncoated surface finish can be used on a broad range of materials
- See more on Amazon...
Suit For Threading Blind Holes In Steel And Non-Ferrous Material; It Can Remove Chip Easily From Holes; Not Suit For Cast Iron.
The Uncoated Surface Finish Can Be Used On A Broad Range Of Materials.
The Round Shank With Square Driver Makes The Taps Suitable For Hand Or Power-Driven Applications.
Normal Diameter: 3/4"; Pitch: 10 Tpi.
Brand: MaxTool | Manufacturer: TG Tools
Dimensions: 0.88 x 5.00 x 1.07 Inches | Weight: 0.32 Pounds
See On Amazon #15
YG-1 G1 Series Vanadium Alloy HSS Spiral Flute Tap, TiN Coated, Round Shank with Square End, Modified Bottoming Chamfer, 5/16"-24 Thread Size, H3 Tolerance
Asin: B00F8UCXF2 | Model: G1463 | PartNumber: G1463
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 0.6875-inches thread length
- See more on Amazon...
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
0.6875-Inches Thread Length.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Titanium Nitride Coatings Add A Hard Layer Of Gold-Colored Ceramic To The Surface That Extends Tool Life And Permits Faster Cutting Speeds Than Uncoated Tools.
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.00 Pounds
See On Amazon #16
YG-1 - F4403 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 1/4"-20 Thread Size, H3 Tolerance
Asin: B00F8T55GC | Model: F4403 | PartNumber: F4403 | Ean: 7147905861954
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 0.625-inches thread length
- See more on Amazon...
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
0.625-Inches Thread Length.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.04 Pounds
See On Amazon #17
YG-1 - F4563 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 1/2"-13 Thread Size, H3 Tolerance
Asin: B00F8T88GG | Model: F4563 | PartNumber: F4563 | Ean: 7535001207460
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 0.9375-inches thread length
- See more on Amazon...
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
0.9375-Inches Thread Length.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.00 Pounds
See On Amazon #18
Kodiak Cutting Tools KCT208019 USA Made Spiral Point Plug Threading Tap, Ground Threads, High Speed Steel, 2 Flute, 1/4" Diameter x 20 TPI, 1/4-20 Size
Asin: B0070YYWVW | Model: KODIAK208019 | PartNumber: KODIAK208019 | Ean: 0789164042315 | UPC: 789164042315
1 Thread Length.
2 Flutes.
2-1/2 Overall Length.
.255 Shank Diameter.
Brand: Kodiak Cutting Tools | Manufacturer: Kodiak Cutting Tools
See On Amazon #19
YG-1 - F4243 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 6-32 Thread Size, H3 Tolerance
Asin: B00F8T45AE | Model: F4243 | PartNumber: F4243 | Ean: 5899406037711
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 0.375-inches thread length
- See more on Amazon...
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
0.375-Inches Thread Length.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.00 Pounds
See On Amazon #20
Wolfride 9pcs Titanium Spiral Flute Tap Set Metric Machine Tap Set M2 M2.5 M3 M4 M5 M6 M8 M10 M12
Asin: B09D7J9VS8 | Model: 80042GY0466 | PartNumber: 80042GY0466
Features
- Made from HSS6542, coated with titanium, high hardness and rust resistance, long service life.
- Tap Size: M2*0.4, M2.5*0.45, M3*0.5, M4*0.7, M5*0.8, M6*1, M8*1.25, M10*1.5, M12*1.75.
- Spiral flutes, good chip removal effect, can tap to the bottom of the blind hole.
- Can be used for processing iron, aluminum and other materials. Please choose cobalt taps for other difficult to machine materials, like stainless steel, cast iron, etc.
- Used on drilling machines, tapping machines, CNC and milling machines, not for hand electric drill.
- See more on Amazon...
Spiral Flutes, Good Chip Removal Effect, Can Tap To The Bottom Of The Blind Hole..
Used On Drilling Machines, Tapping Machines, Cnc And Milling Machines, Not For Hand Electric Drill..
Can Be Used For Processing Iron, Aluminum And Other Materials. Please Choose Cobalt Taps For Other Difficult To Machine Materials, Like Stainless Steel, Cast Iron, Etc..
Tap Size: M2*0.4, M2.5*0.45, M3*0.5, M4*0.7, M5*0.8, M6*1, M8*1.25, M10*1.5, M12*1.75..
Brand: Wolfride | Manufacturer: Wolfride
See On Amazon #21
YG-1 - F4483 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 3/8"-16 Thread Size, H3 Tolerance
Asin: B00F8T68OK | Model: F4483 | PartNumber: F4483 | Ean: 7535001296945
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 0.75-inches thread length
- See more on Amazon...
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
0.75-Inches Thread Length.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.07 Pounds
See On Amazon #22
uxcell M8 x 1.25 Spiral Flute Thread Tap, Metric Machine Threading Tap HSS Nitriding Coated, Round Shank with Square End, H2 Tolerance, 2pcs
Asin: B097675VWF | Model: a20010400ux0075 | PartNumber: a20010400ux0075
Features
- Tap Size: M8 x 1.25 thread, H2 tolerance. Spiral flute design, upward chip removal. Right hand thread cutting, clear threads without burrs, fast tapping with accuracy.
- Material and Finish: High-speed steel tool is with high hardness and toughness for wear resistance, good for general purpose applications. Features nitriding coated surface for rust prevention and long service life.
- Applications: Suitable for processing blind holes and sticky materials. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc.
- Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps.
- Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause damage to the tap due to uneven force.
- See more on Amazon...
Applications: Suitable For Processing Blind Holes And Sticky Materials. Great For Drilling And Tapping Aluminum, Die Steel, Stainless Steel, Bronze, Hard Plastics, Etc..
Tips: Machine Taps Are Suggested To Be Used With Tap Collets With Overload Protection. Hand Use Is Easy To Cause Damage To The Tap Due To Uneven Force..
Easy To Use: Used On Drilling Machines, Tapping Machines, Cnc And Milling Machines. Use With Tapping Oil To Get Higher Quality Threads And More Durable Taps..
Material And Finish: High-Speed Steel Tool Is With High Hardness And Toughness For Wear Resistance, Good For General Purpose Applications. Features Nitriding Coated Surface For Rust Prevention And Long Service Life..
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 Pounds
See On Amazon #23
MaxTool 5/8-11 Spiral Flute Taps HSS M2 Thread Taps 11 TPI FULLY GROUND RIGHT HAND; SFF02W02R40
Asin: B07TX6ZWY6 | Ean: 0634301937576 | UPC: 634301937576
Features
- The premium high speed steel M2 material provides long tool life
- Normal Diameter: 5/8; Pitch: 11 TPI
- Suit for threading blind holes in steel and Non-Ferrous material; It can remove chip easily from holes; not suit for cast iron
- The round shank with square driver makes the taps suitable for hand or power-driven applications
- The uncoated surface finish can be used on a broad range of materials
- See more on Amazon...
Suit For Threading Blind Holes In Steel And Non-Ferrous Material; It Can Remove Chip Easily From Holes; Not Suit For Cast Iron.
The Uncoated Surface Finish Can Be Used On A Broad Range Of Materials.
The Round Shank With Square Driver Makes The Taps Suitable For Hand Or Power-Driven Applications.
Normal Diameter: 5/8"; Pitch: 11 Tpi.
Brand: MaxTool | Manufacturer: TG Tools
Dimensions: 0.88 x 5.00 x 1.07 Inches | Weight: 0.20 Pounds
See On Amazon #24
YG-1 G1 Series Vanadium Alloy HSS Spiral Flute Tap, TiN Coated, Round Shank with Square End, Modified Bottoming Chamfer, 4-40 Thread Size, H2 Tolerance
Asin: B00F8UAOJO | Model: G1162 | PartNumber: G1162 | Ean: 7241871141635
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 0.3125-inches thread length
- See more on Amazon...
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
0.3125-Inches Thread Length.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Titanium Nitride Coatings Add A Hard Layer Of Gold-Colored Ceramic To The Surface That Extends Tool Life And Permits Faster Cutting Speeds Than Uncoated Tools.
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.02 pounds
See On Amazon #25
YG-1 G4 Series Vanadium Alloy HSS Spiral Flute Tap, Uncoated (Bright) Finish, Round Shank with Square End, Bottoming Chamfer, M5-0.8 Thread Size, D4 Tolerance -G4284
Asin: B00F8UQYEI | Model: G4284 | PartNumber: G4284 | Ean: 7241871141598
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 0.5-inches thread length
- See more on Amazon...
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
0.5-Inches Thread Length.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Brand: YG-1 | Manufacturer: YG-1 Tool Company
See On Amazon #26
YG1 TG836SET8 | 3 Flute Spiral HSS-Ex TiCN Coated Combo Tap Set
Asin: B01DE13WM4 | Ean: 0609728674533 | UPC: 609728674533
Features
- Our part # YG1-TG836SET8
- Combo 8 pc. tap set with TiCN coated taps - 1/4-20, 1/4-28, 5/16-18, 5-16-24, 3/8-16, 3/8-24, 7/16-14 & 7/16-20
- Reduces tap breakage, ensures accurate thread depth. Eliminates loose threads due to tap overfeeding
- Improves thread quality and chip evacuation.
- See more on Amazon...
Reduces Tap Breakage, Ensures Accurate Thread Depth. Eliminates Loose Threads Due To Tap Overfeeding.
Improves Thread Quality And Chip Evacuation..
Combo 8 Pc. Tap Set With Ticn Coated Taps - 1/4-20, 1/4-28, 5/16-18, 5-16-24, 3/8-16, 3/8-24, 7/16-14 & 7/16-20.
Brand: YG-1 | Manufacturer: YG-1 America Inc.
Weight: 0.00 Pounds
See On Amazon #27
Burkit 5/8"-11 UNC Spiral Flute Tap, HSS Titanium Coated Spiral Flute Plug Threading Tap 5/8 x 11 UNC
Asin: B0C71717XS
Features
- Cutting Diameter: 5/8 Inch, TPI: 11 Teeth per Inch, Cutting Direction: Right Hand, Accuracy Class: 2B.
- Material: Manufactured by high-temperature quenching of 6542 high-speed steel(M2), higher toughness and wear resistance. With Ti-Coated for improving wear and fusion resistance.
- Features: Chips are discharged upwards when machining threads, the flute geometry enables efficient chip evacuation even in long holes, ideal for both through-hole and blind-hole threading.
- Applications: Can be used for tapping stainless steel (below 30HRC), aluminum, die steel, ordinary steel, non-ferrous metals, hard plastics, etc.
- Package Include: 1pc 5/8-11 UNC Spiral Flute Tap.
- See more on Amazon...
Features: Chips Are Discharged Upwards When Machining Threads, The Flute Geometry Enables Efficient Chip Evacuation Even In Long Holes, Ideal For Both Through-Hole And Blind-Hole Threading..
Package Include: 1Pc 5/8"-11 Unc Spiral Flute Tap..
Applications: Can Be Used For Tapping Stainless Steel (Below 30Hrc), Aluminum, Die Steel, Ordinary Steel, Non-Ferrous Metals, Hard Plastics, Etc..
Material: Manufactured By High-Temperature Quenching Of 6542 High-Speed Steel(M2), Higher Toughness And Wear Resistance. With Ti-Coated For Improving Wear And Fusion Resistance..
Brand: Burkit | Manufacturer: Burkit
See On Amazon #28
YG-1 F8 Series Vanadium Alloy HSS Spiral Flute Tap, TiN Coated, Round Shank with Square End, Bottoming Chamfer, 1/2"-13 Thread Size, H5 Tolerance
Asin: B00F8U0OOE | Model: F8565 | PartNumber: F8565
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 0.9375-inches thread length
- See more on Amazon...
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
0.9375-Inches Thread Length.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Titanium Nitride Coatings Add A Hard Layer Of Gold-Colored Ceramic To The Surface That Extends Tool Life And Permits Faster Cutting Speeds Than Uncoated Tools.
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.10 Pounds
See On Amazon #29
YG-1 - F8483 F8 Series Vanadium Alloy HSS Spiral Flute Tap, TiN Coated, Round Shank with Square End, Bottoming Chamfer, 3/8"-16 Thread Size, H3 Tolerance
Asin: B00F8TYPZO | Model: F8483 | PartNumber: F8483
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 0.75-inches thread length
- See more on Amazon...
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
0.75-Inches Thread Length.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Titanium Nitride Coatings Add A Hard Layer Of Gold-Colored Ceramic To The Surface That Extends Tool Life And Permits Faster Cutting Speeds Than Uncoated Tools.
First Available: 11/25/2017
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.07 Pounds
See On Amazon #30
uxcell 5/16"-18 BSW Spiral Flute Thread Tap, Machine Threading Tap HSS-Cobalt Screw Tapping Tool for Machinist Thread Repair, H2 Tolerance
Asin: B091L6B8Q2 | Model: a20010400ux0091 | PartNumber: a20010400ux0091
Features
- Tap Size: 5/16"-18 BSW thread, H2 tolerance. Spiral flute design, upward chip removal. Right hand thread cutting, clear threads without burrs, fast tapping with accuracy.
- Material and Finish: M35 cobalt high-speed steel tool (5% Co) is with high hardness (up to around 67HRC) and toughness for wear resistance. Features just the base substrate without any additional coatings, great for wide ranges of applications.
- Applications: Suitable for processing blind holes and sticky materials. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc.
- Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps.
- Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause damage to the tap due to uneven force.
- See more on Amazon...
Applications: Suitable For Processing Blind Holes And Sticky Materials. Great For Drilling And Tapping Aluminum, Die Steel, Stainless Steel, Bronze, Hard Plastics, Etc..
Tips: Machine Taps Are Suggested To Be Used With Tap Collets With Overload Protection. Hand Use Is Easy To Cause Damage To The Tap Due To Uneven Force..
Easy To Use: Used On Drilling Machines, Tapping Machines, Cnc And Milling Machines. Use With Tapping Oil To Get Higher Quality Threads And More Durable Taps..
Material And Finish: M35 Cobalt High-Speed Steel Tool (5% Co) Is With High Hardness (Up To Around 67Hrc) And Toughness For Wear Resistance. Features Just The Base Substrate Without Any Additional Coatings, Great For Wide Ranges Of Applications..
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 Pounds
See On Amazon
Looking For Something Else?
Search