Best Thread Forming & Cutting Screws - Buying Guide
Last Updated: 04/27/2024
Share on
Bestselling Thread Forming & Cutting Screws on Amazon
- Small Parts 0810LPPB Steel Thread Rolling Screw for Plastic, Black Oxide Finish, Pan Head, Phillips ...
- Small Parts 1012LPP410 410 Stainless Steel Thread Rolling Screw for Plastic, Passivated Finish, Pan ...
- uxcell Thread Forming Tap M6 Thread 1 Pitch H2 Tolerance Titanium High Speed Steel
- CLEVELAND Thread Forming Tap,#8-32,HSS C59236
- Small Parts 0610LPP Steel Thread Rolling Screw for Plastic, Zinc Plated, Pan Head, Phillips Drive, #...
- Small Parts 0408LTFB Steel Thread Rolling Screw for Plastic, Black Oxide Finish, 82 Degree Flat Head...
- 5 Piece NPT Thread Forming Taps, Pipe Taps Set, High-speed Steel Drill Bits for Cleaning or Re-threa...
- Small Parts 3716FW Steel Thread Cutting Screw, Zinc Plated Finish, Hex Washer Head, Type F, 3/8"-16 ...
- Small Parts 0810LPP188 18-8 Stainless Steel Thread Rolling Screw for Plastic, Passivated Finish, Pan...
- M9 x 1.25 HSS Right Hand Thread Forming Tap
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
Small Parts 0810LPPB Steel Thread Rolling Screw for Plastic, Black Oxide Finish, Pan Head, Phillips Drive, #8-16 Thread Size, 5/8" Length (Pack of 100)
Asin: B00GDYESIW | Model: 0810LPPB | PartNumber: 0810LPPB
Features
- Thread rolling screw recommended for use in plastic
- Steel is often used in applications where strength is the primary consideration
- Black oxide finish offers mild corrosion resistance and lubricity
- Pan head has a flat top and short vertical sides with a rounded top edge
- Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening
- See more on Amazon...
Black Oxide Finish Offers Mild Corrosion Resistance And Lubricity.
Phillips Drive Has An X-Shaped Slot That Accepts A Phillips Driver And Is Designed To Prevent Over-Tightening.
Pan Head Has A Flat Top And Short Vertical Sides With A Rounded Top Edge.
Steel Is Often Used In Applications Where Strength Is The Primary Consideration.
Brand: Small Parts | Manufacturer: Small Parts
Dimensions: 0.00 x 0.63 x 0.00 Inches
See On Amazon #2
Small Parts 1012LPP410 410 Stainless Steel Thread Rolling Screw for Plastic, Passivated Finish, Pan Head, Phillips Drive, #10-14 Thread Size, 3/4" Length (Pack of 25)
Asin: B00GDYD040 | Model: 1012LPP410 | PartNumber: 1012LPP410
Features
- Thread rolling screw recommended for use in plastic
- 410 stainless steel has high strength and hardness, and resists corrosion in mild environments
- Passivated finish enhances the natural corrosion resistance of stainless steel
- Pan head has a flat top and short vertical sides with a rounded top edge
- Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening
- See more on Amazon...
Passivated Finish Enhances The Natural Corrosion Resistance Of Stainless Steel.
Phillips Drive Has An X-Shaped Slot That Accepts A Phillips Driver And Is Designed To Prevent Over-Tightening.
Pan Head Has A Flat Top And Short Vertical Sides With A Rounded Top Edge.
410 Stainless Steel Has High Strength And Hardness, And Resists Corrosion In Mild Environments.
Brand: Small Parts | Manufacturer: Small Parts
Dimensions: 0.00 x 0.75 x 0.00 Inches
See On Amazon #3
uxcell Thread Forming Tap M6 Thread 1 Pitch H2 Tolerance Titanium High Speed Steel
Asin: B07VDSFJ3N | Model: a19051000ux0628 | PartNumber: a19051000ux0628
Features
- Thread Size: M6; Pitch: 1; Shank Side Width: 4.5mm / 0.18 inch
- Thread Length: 24mm / 0.94 inch; Total Length: 68mm / 2.68 inch
- Material: HSS (High Speed Steel); Surface Treatment: Ti Coated
- Used with some cutting fluid or keep it wet when tapping, the tap will last longer.
- Thread Forming Tap is suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron.
- See more on Amazon...
Material: Hss (High Speed Steel); Surface Treatment: Ti Coated.
Thread Forming Tap Is Suitable For Drilling, Tapping, Cutting On Soft Metal, Aluminum Plate, Iron..
Used With Some Cutting Fluid Or Keep It Wet When Tapping, The Tap Will Last Longer..
Thread Length: 24Mm / 0.94 Inch; Total Length: 68Mm / 2.68 Inch.
Brand: uxcell | Manufacturer: uxcell
See On Amazon #4
CLEVELAND Thread Forming Tap,#8-32,HSS C59236
Asin: B08DTDP22Q | Model: C59236 | PartNumber: C59236 | Ean: 0697334592365 | UPC: 697334592365
Brand: CLEVELAND | Manufacturer: CLEVELAND
See On Amazon #5
Small Parts 0610LPP Steel Thread Rolling Screw for Plastic, Zinc Plated, Pan Head, Phillips Drive, #6-19 Thread Size, 5/8" Length (Pack of 100)
Asin: B00GDXXMUI | Model: 0610LPP | PartNumber: 0610LPP
Features
- Thread rolling screw recommended for use in plastic
- Steel is often used in applications where strength is the primary consideration
- Zinc plating resists corrosion and has a reflective appearance
- Pan head has a flat top and short vertical sides with a rounded top edge
- Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening
- See more on Amazon...
Zinc Plating Resists Corrosion And Has A Reflective Appearance.
Phillips Drive Has An X-Shaped Slot That Accepts A Phillips Driver And Is Designed To Prevent Over-Tightening.
Pan Head Has A Flat Top And Short Vertical Sides With A Rounded Top Edge.
Steel Is Often Used In Applications Where Strength Is The Primary Consideration.
Brand: Small Parts | Manufacturer: Small Parts
Dimensions: 0.00 x 0.63 x 0.00 Inches | Weight: 0.00 Pounds
See On Amazon #6
Small Parts 0408LTFB Steel Thread Rolling Screw for Plastic, Black Oxide Finish, 82 Degree Flat Head, Star Drive, #4-20 Thread Size, 1/2" Length (Pack of 100)
Asin: B00GDYNQBM | Model: 0408LTFB | PartNumber: 0408LTFB
Features
- Thread rolling screw recommended for use in plastic
- Steel is often used in applications where strength is the primary consideration
- Black oxide finish offers mild corrosion resistance and lubricity
- Flat head has an 82-degree cone-shaped bearing surface for use in countersunk holes and a flat top that fits flush with the mated surface
- Star drive has a six-pointed indentation that provides a large contact area for the driver, resisting slippage better than a Phillips or slotted drive
- See more on Amazon...
Black Oxide Finish Offers Mild Corrosion Resistance And Lubricity.
Star Drive Has A Six-Pointed Indentation That Provides A Large Contact Area For The Driver, Resisting Slippage Better Than A Phillips Or Slotted Drive.
Flat Head Has An 82-Degree Cone-Shaped Bearing Surface For Use In Countersunk Holes And A Flat Top That Fits Flush With The Mated Surface.
Steel Is Often Used In Applications Where Strength Is The Primary Consideration.
Brand: Small Parts | Manufacturer: Small Parts
Dimensions: 0.00 x 0.50 x 0.00 Inches
See On Amazon #7
5 Piece NPT Thread Forming Taps, Pipe Taps Set, High-speed Steel Drill Bits for Cleaning or Re-thread Damaged or Jam Pipe Threads, Size 1/8", 1/4", 3/8", 1/2", 3/4" in Storage Box
Asin: B085T4RP4C | Model: pipe-taps | PartNumber: pipe-taps | Ean: 0194999183353 | UPC: 194999183353
Features
- Durable materials: Upgrade Your Pipe Threading game with Our Composite Steel Pipe Taps Set. Ditch your old, carbon steel pipe taps and upgrade to our composite steel (GCR15) pipe taps set. With a higher hardness level than traditional carbon steel, our pipe taps are more durable and long-lasting.
- Tool Storage Box: The 5-piece set includes all the sizes you need for clean and re-threading damaged or jam pipe threads, and the Storage Box makes for easy organization and transport. Includes size of: 1/8 - 27 npt, 1/4 - 18 npt, 3/8 - 18 npt, 1/2 - 14 npt, 3/4 - 14 npt
- Versatile set suitable for both personal and professional use. Clean and Re-Thread Damaged or Jam Pipe Threads with Ease - Ideal for Pipe Fittings, DIYers, handymen, and professionals who need to repair damaged pipe threads. Revive Damaged Pipe Threads with Precision Using Our 5-Piece High-Speed Steel NPT Pipe Taps Set.
- NPT and BSP Available - Perfect for Cuts Internal Threads in Pipes. Durable and Harder Than Carbon Steel - Our GCR15 Material Makes All the Difference. With a round shank and square end, our pipe taps are well-suited for most applications in shallow cuts. Upgrade your pipe threading game today with our composite steel pipe taps set.
- Uncoated Tools for Versatile Use: Uncoated tools feature just the base substrate without any additional treatment or coatings. Our uncoated Pipe Taps Set are suitable for a wide range of applications, and the straight flute design allows chips to collect in the flutes as they cut.
- See more on Amazon...
Versatile Set Suitable For Both Personal And Professional Use. Clean And Re-Thread Damaged Or Jam Pipe Threads With Ease - Ideal For Pipe Fittings, Diyers, Handymen, And Professionals Who Need To Repair Damaged Pipe Threads. Revive Damaged Pipe Threads With Precision Using Our 5-Piece High-Speed Steel Npt Pipe Taps Set..
Uncoated Tools For Versatile Use: Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings. Our Uncoated Pipe Taps Set Are Suitable For A Wide Range Of Applications, And The Straight Flute Design Allows Chips To Collect In The Flutes As They Cut..
Npt And Bsp Available - Perfect For Cuts Internal Threads In Pipes. Durable And Harder Than Carbon Steel - Our Gcr15 Material Makes All The Difference. With A Round Shank And Square End, Our Pipe Taps Are Well-Suited For Most Applications In Shallow Cuts. Upgrade Your Pipe Threading Game Today With Our Composite Steel Pipe Taps Set..
Tool Storage Box: The 5-Piece Set Includes All The Sizes You Need For Clean And Re-Threading Damaged Or Jam Pipe Threads, And The Storage Box Makes For Easy Organization And Transport. Includes Size Of: 1/8" - 27 Npt, 1/4" - 18 Npt, 3/8" - 18 Npt, 1/2" - 14 Npt, 3/4" - 14 Npt.
Brand: WMAZtool | Manufacturer: WM077
Dimensions: 1.50 x 5.40 x 3.50 inches
See On Amazon #8
Small Parts 3716FW Steel Thread Cutting Screw, Zinc Plated Finish, Hex Washer Head, Type F, 3/8"-16 Thread Size, 1" Length (Pack of 10)
Asin: B00GX1LZPY | Model: 3716FW | PartNumber: 3716FW
Features
- Thread cutting screw with type F point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic
- Steel is often used in applications where strength is the primary consideration
- Zinc plating resists corrosion and has a reflective appearance
- Hex washer head has a flange for additional grip with the mating surface and has six flat sides that a wrench can grip to turn from the side
- See more on Amazon...
Zinc Plating Resists Corrosion And Has A Reflective Appearance.
Hex Washer Head Has A Flange For Additional Grip With The Mating Surface And Has Six Flat Sides That A Wrench Can Grip To Turn From The Side.
Steel Is Often Used In Applications Where Strength Is The Primary Consideration.
Brand: Small Parts | Manufacturer: Small Parts
Dimensions: 0.00 x 1.00 x 0.00 Inches
See On Amazon #9
Small Parts 0810LPP188 18-8 Stainless Steel Thread Rolling Screw for Plastic, Passivated Finish, Pan Head, Phillips Drive, #8-16 Thread Size, 5/8" Length (Pack of 25)
Asin: B00GDY8ERI | Model: 0810LPP188 | PartNumber: 0810LPP188
Features
- Thread rolling screw recommended for use in plastic
- 18-8 stainless steel provides good corrosion resistance and strength
- Passivated finish enhances the natural corrosion resistance of stainless steel
- Pan head has a flat top and short vertical sides with a rounded top edge
- Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening
- See more on Amazon...
Passivated Finish Enhances The Natural Corrosion Resistance Of Stainless Steel.
Phillips Drive Has An X-Shaped Slot That Accepts A Phillips Driver And Is Designed To Prevent Over-Tightening.
Pan Head Has A Flat Top And Short Vertical Sides With A Rounded Top Edge.
18-8 Stainless Steel Provides Good Corrosion Resistance And Strength.
Brand: Small Parts | Manufacturer: Small Parts
Dimensions: 0.00 x 0.63 x 0.00 Inches
See On Amazon #10
M9 x 1.25 HSS Right Hand Thread Forming Tap
Asin: B07S4MVXZZ
Features
- M9 x 1.25 HSS metric right hand thread forming tap
- Use for aluminum or soft metal processing
- See more on Amazon...
Use For Aluminum Or Soft Metal Processing.
Brand: GAVAN | Manufacturer: GAVAN
See On Amazon #11
M1.6 x 0.35 HSS Right Hand Thread Forming Tap
Asin: B07S2SWLV1
Features
- M1.6 x 0.35 HSS metric right hand thread forming tap
- Use for aluminum or soft metal processing
- See more on Amazon...
Use For Aluminum Or Soft Metal Processing.
Brand: GAVAN | Manufacturer: GAVAN
See On Amazon #12
Small Parts 0610LPPB Steel Thread Rolling Screw for Plastic, Black Oxide Finish, Pan Head, Phillips Drive, #6-19 Thread Size, 5/8" Length (Pack of 100)
Asin: B00GDYE91S | Model: 0610LPPB | PartNumber: 0610LPPB
Features
- Thread rolling screw recommended for use in plastic
- Steel is often used in applications where strength is the primary consideration
- Black oxide finish offers mild corrosion resistance and lubricity
- Pan head has a flat top and short vertical sides with a rounded top edge
- Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening
- See more on Amazon...
Black Oxide Finish Offers Mild Corrosion Resistance And Lubricity.
Phillips Drive Has An X-Shaped Slot That Accepts A Phillips Driver And Is Designed To Prevent Over-Tightening.
Pan Head Has A Flat Top And Short Vertical Sides With A Rounded Top Edge.
Steel Is Often Used In Applications Where Strength Is The Primary Consideration.
Brand: Small Parts | Manufacturer: Small Parts
Dimensions: 0.00 x 0.63 x 0.00 Inches
See On Amazon #13
Small Parts 0812LPP410 410 Stainless Steel Thread Rolling Screw for Plastic, Passivated Finish, Pan Head, Phillips Drive, #8-16 Thread Size, 3/4" Length (Pack of 25)
Asin: B00GDYCRD0 | Model: 0812LPP410 | PartNumber: 0812LPP410
Features
- Thread rolling screw recommended for use in plastic
- 410 stainless steel has high strength and hardness, and resists corrosion in mild environments
- Passivated finish enhances the natural corrosion resistance of stainless steel
- Pan head has a flat top and short vertical sides with a rounded top edge
- Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening
- See more on Amazon...
Passivated Finish Enhances The Natural Corrosion Resistance Of Stainless Steel.
Phillips Drive Has An X-Shaped Slot That Accepts A Phillips Driver And Is Designed To Prevent Over-Tightening.
Pan Head Has A Flat Top And Short Vertical Sides With A Rounded Top Edge.
410 Stainless Steel Has High Strength And Hardness, And Resists Corrosion In Mild Environments.
Brand: Small Parts | Manufacturer: Small Parts
Dimensions: 0.00 x 0.75 x 0.00 Inches
See On Amazon #14
Gordon Glass Thread Forming Screws for Plastics (48-2) / Pan Head, Phillips Drive, 8-16 Thread Size, 3/4" Length (Pack of 50)
Asin: B0CW2B9DXM | Ean: 0096523258707 | UPC: 096523258707
Features
- Thread Forming Screws for Plastic
- Thread rolling screw recommended for use in plastic
- Size: #8, Thread Pitch: 8-16, Length: 3/4
- Head Style: Pan Head, Drive Style: Phillips, Driver Size: 2
- Fully Threaded, Material: Steel, Finish: Zinc, RoHS: Compliant
- See more on Amazon...
Size: #8, Thread Pitch: 8-16, Length: 3/4".
Fully Threaded, Material: Steel, Finish: Zinc, Rohs: Compliant.
Head Style: Pan Head, Drive Style: Phillips, Driver Size: 2.
Thread Rolling Screw Recommended For Use In Plastic.
Brand: Gordon Glass Co. | Manufacturer: Gordon Glass Co.
Dimensions: 0.10 x 0.75 x 0.05 Inches | Weight: 0.25 pounds
See On Amazon #15
Small Parts 0616LPP410 410 Stainless Steel Thread Rolling Screw for Plastic, Passivated Finish, Pan Head, Phillips Drive, #6-19 Thread Size, 1" Length (Pack of 25)
Asin: B00GDYCBQ8 | Model: 0616LPP410 | PartNumber: 0616LPP410
Features
- Thread rolling screw recommended for use in plastic
- 410 stainless steel has high strength and hardness, and resists corrosion in mild environments
- Passivated finish enhances the natural corrosion resistance of stainless steel
- Pan head has a flat top and short vertical sides with a rounded top edge
- Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening
- See more on Amazon...
Passivated Finish Enhances The Natural Corrosion Resistance Of Stainless Steel.
Phillips Drive Has An X-Shaped Slot That Accepts A Phillips Driver And Is Designed To Prevent Over-Tightening.
Pan Head Has A Flat Top And Short Vertical Sides With A Rounded Top Edge.
410 Stainless Steel Has High Strength And Hardness, And Resists Corrosion In Mild Environments.
Brand: Small Parts | Manufacturer: Small Parts
Dimensions: 0.00 x 1.00 x 0.00 Inches
See On Amazon #16
Small Parts 1008LPPB Steel Thread Rolling Screw for Plastic, Black Oxide Finish, Pan Head, Phillips Drive, #10-14 Thread Size, 1/2" Length (Pack of 50)
Asin: B00GDYFHGY | Model: 1008LPPB | PartNumber: 1008LPPB
Features
- Thread rolling screw recommended for use in plastic
- Steel is often used in applications where strength is the primary consideration
- Black oxide finish offers mild corrosion resistance and lubricity
- Pan head has a flat top and short vertical sides with a rounded top edge
- Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening
- See more on Amazon...
Black Oxide Finish Offers Mild Corrosion Resistance And Lubricity.
Phillips Drive Has An X-Shaped Slot That Accepts A Phillips Driver And Is Designed To Prevent Over-Tightening.
Pan Head Has A Flat Top And Short Vertical Sides With A Rounded Top Edge.
Steel Is Often Used In Applications Where Strength Is The Primary Consideration.
Brand: Small Parts | Manufacturer: Small Parts
Dimensions: 0.00 x 0.50 x 0.00 Inches | Weight: 0.02 pounds
See On Amazon #17
Small Parts 0612LPP410 410 Stainless Steel Thread Rolling Screw for Plastic, Passivated Finish, Pan Head, Phillips Drive, #6-19 Thread Size, 3/4" Length (Pack of 25)
Asin: B00GDYC2IU | Model: 0612LPP410 | PartNumber: 0612LPP410
Features
- Thread rolling screw recommended for use in plastic
- 410 stainless steel has high strength and hardness, and resists corrosion in mild environments
- Passivated finish enhances the natural corrosion resistance of stainless steel
- Pan head has a flat top and short vertical sides with a rounded top edge
- Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening
- See more on Amazon...
Passivated Finish Enhances The Natural Corrosion Resistance Of Stainless Steel.
Phillips Drive Has An X-Shaped Slot That Accepts A Phillips Driver And Is Designed To Prevent Over-Tightening.
Pan Head Has A Flat Top And Short Vertical Sides With A Rounded Top Edge.
410 Stainless Steel Has High Strength And Hardness, And Resists Corrosion In Mild Environments.
Brand: Small Parts | Manufacturer: Small Parts
Dimensions: 0.00 x 0.75 x 0.00 Inches
See On Amazon #18
Small Parts 0406LTFB Steel Thread Rolling Screw for Plastic, Black Oxide Finish, 82 Degree Flat Head, Star Drive, #4-20 Thread Size, 3/8" Length (Pack of 100)
Asin: B00GDYNNQK | Model: 0406LTFB | PartNumber: 0406LTFB
Features
- Thread rolling screw recommended for use in plastic
- Steel is often used in applications where strength is the primary consideration
- Black oxide finish offers mild corrosion resistance and lubricity
- Flat head has an 82-degree cone-shaped bearing surface for use in countersunk holes and a flat top that fits flush with the mated surface
- Star drive has a six-pointed indentation that provides a large contact area for the driver, resisting slippage better than a Phillips or slotted drive
- See more on Amazon...
Black Oxide Finish Offers Mild Corrosion Resistance And Lubricity.
Star Drive Has A Six-Pointed Indentation That Provides A Large Contact Area For The Driver, Resisting Slippage Better Than A Phillips Or Slotted Drive.
Flat Head Has An 82-Degree Cone-Shaped Bearing Surface For Use In Countersunk Holes And A Flat Top That Fits Flush With The Mated Surface.
Steel Is Often Used In Applications Where Strength Is The Primary Consideration.
Brand: Small Parts | Manufacturer: Small Parts
Dimensions: 0.00 x 0.38 x 0.00 Inches | Weight: 0.02 pounds
See On Amazon #19
Alfa Tools TFP71716 10-32" HSS Thread Forming Tap Plug
Asin: B00B745OGI | Model: TFP71716 | PartNumber: TFP71716 | Ean: 0721511752164 | UPC: 721511752164
Features
- Thread Forming Tap, Plug Chamfer
- 10-32 Tap Machine Screw Size
- H5 Grind Limits, 3B Class of Fit
- For internal threading in ductile materials
- Quantity: 1 per Pack
- See more on Amazon...
H5 Grind Limits, 3B Class Of Fit.
Quantity: 1 Per Pack.
For Internal Threading In Ductile Materials.
10-32 Tap Machine Screw Size.
Brand: Alfa Tools | Manufacturer: Alfa Tools
Dimensions: 0.43 x 4.00 x 2.50 Inches | Weight: 0.10 pounds
See On Amazon #20
Gunpla NPT Pipe Thread Tap 1 Inch(1" - 11.5 NPT), Alloy Steel Internal Thread Forming Tap, Pipes Threading Flutes for Cleaning or Re-Thread Damaged or Jam Pipe Threads
Asin: B0CWL8Q5V5 | Model: #022924 | PartNumber: #022924
Features
- GOOD QUALITY THREAD TAPS: Gunpla flute thread taps are developed from excellent quality alloy steel material. Crafted to last, our pipe taps for threading are hardened, with high concentration on rust resistance characteristics with enhanced durability
- COMPLETE FEATURES TAPPING THREAD: Perfect nominal sizes for these NPT thread taps for pipe. With square universal chuck, our internal thread forming taps can be used with hand or tap machine, convenient and fast. Designed with round shank and square end, these straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts
- RE-THREADING AND MILLING PIPE TAP: This flute threading tap is the ideal gadget for or cleaning, re-threading, milling and repairing damaged or jam pipe threads. They can also be used for creating new threads and rethreading
- PERFECT NPT PTHREAD TAPS: 1NPT 11.5. Easily cut internal threads in pipes. It is used for the repair of rusted, broken and slippery threads of water pipe water joints as well
- HIGH CUTTING RESISTANCE: The thread is standard, clear, and the cutting resistance is smaller than that of ordinary taps, making Gunpla NPT thread taps more reliable for through-hole processing. Standard tooth spacing, no bad teeth, no burrs. Slotted in the front section, chip removal in the upper phase, easy to repair, through holes and blind holes are available
- See more on Amazon...
Re-Threading And Milling Pipe Tap: This Flute Threading Tap Is The Ideal Gadget For Or Cleaning, Re-Threading, Milling And Repairing Damaged Or Jam Pipe Threads. They Can Also Be Used For Creating New Threads And Rethreading.
High Cutting Resistance: The Thread Is Standard, Clear, And The Cutting Resistance Is Smaller Than That Of Ordinary Taps, Making Gunpla Npt Thread Taps More Reliable For Through-Hole Processing. Standard Tooth Spacing, No Bad Teeth, No Burrs. Slotted In The Front Section, Chip Removal In The Upper Phase, Easy To Repair, Through Holes And Blind Holes Are Available.
Perfect Npt Pthread Taps: 1"Npt 11.5. Easily Cut Internal Threads In Pipes. It Is Used For The Repair Of Rusted, Broken And Slippery Threads Of Water Pipe Water Joints As Well.
Complete Features Tapping Thread: Perfect Nominal Sizes For These Npt Thread Taps For Pipe. With Square Universal Chuck, Our Internal Thread Forming Taps Can Be Used With Hand Or Tap Machine, Convenient And Fast. Designed With Round Shank And Square End, These Straight Flute Tools Allow Chips To Collect In The Flutes As They Cut And Are Well Suited For Most Applications In Shallow Cuts.
Brand: Gunpla | Manufacturer: gunpla
See On Amazon #21
Small Parts 0404LPP410 410 Stainless Steel Thread Rolling Screw for Plastic, Passivated Finish, Pan Head, Phillips Drive, #4-20 Thread Size, 1/4" Length (Pack of 50)
Asin: B00GDYB61Y | Model: 0404LPP410 | PartNumber: 0404LPP410
Features
- Thread rolling screw recommended for use in plastic
- 410 stainless steel has high strength and hardness, and resists corrosion in mild environments
- Passivated finish enhances the natural corrosion resistance of stainless steel
- Pan head has a flat top and short vertical sides with a rounded top edge
- Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening
- See more on Amazon...
Passivated Finish Enhances The Natural Corrosion Resistance Of Stainless Steel.
Phillips Drive Has An X-Shaped Slot That Accepts A Phillips Driver And Is Designed To Prevent Over-Tightening.
Pan Head Has A Flat Top And Short Vertical Sides With A Rounded Top Edge.
410 Stainless Steel Has High Strength And Hardness, And Resists Corrosion In Mild Environments.
Brand: Small Parts | Manufacturer: Small Parts
Dimensions: 0.00 x 0.25 x 0.00 Inches | Weight: 0.00 pounds
See On Amazon #22
Kodiak Cutting Tools KCT210725 USA Made Thread Forming Roll Tap, Plug Style, High Speed Steel, TiN Coated, H8 Limit, 1/2-13 Size
Asin: B007BTQ76Y | Model: KODIAK210725 | PartNumber: KODIAK210725
1-21/32 Thread Length.
H8 Limit.
3-3/8 Overall Length.
.367 Shank Diameter.
Brand: Kodiak Cutting Tools | Manufacturer: Kodiak Cutting Tools
See On Amazon #23
Ruiwaer 1/2 inch NPT Thread Forming Taps Round Shank with Square End
Asin: B0BN51B7B9 | Model: NPT-TFTRSSE-77x21-S1 | PartNumber: NPT-TFTRSSE-77x21-S1
Features
- The products are forged from high-quality bearing steel, with good surface treatment, high strength and good toughness.
- Size of square end of product: 0.55 x 0.55 inch.
- 1/2'' NPT pipe joint is mainly used for cleaning and thread chasing.
- The product is mainly aimed at the repair of threads such as rust, fracture and slip of water pipe joints.
- The product includes: 1 cylindrical pipe thread tap. Please pay attention to the finished size when purchasing.
- See more on Amazon...
1/2'' Npt Pipe Joint Is Mainly Used For Cleaning And Thread Chasing..
The Product Includes: 1 Cylindrical Pipe Thread Tap. Please Pay Attention To The Finished Size When Purchasing..
The Product Is Mainly Aimed At The Repair Of Threads Such As Rust, Fracture And Slip Of Water Pipe Joints..
Size Of Square End Of Product: 0.55 X 0.55 Inch..
Brand: Ruiwaer | Manufacturer: Ruiwaer
See On Amazon #24
Small Parts 1212LPP188 18-8 Stainless Steel Thread Rolling Screw for Plastic, Passivated Finish, Pan Head, Phillips Drive, #12-11 Thread Size, 3/4" Length (Pack of 25)
Asin: B00GDY9WK6 | Model: 1212LPP188 | PartNumber: 1212LPP188
Features
- Thread rolling screw recommended for use in plastic
- 18-8 stainless steel provides good corrosion resistance and strength
- Passivated finish enhances the natural corrosion resistance of stainless steel
- Pan head has a flat top and short vertical sides with a rounded top edge
- Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening
- See more on Amazon...
Passivated Finish Enhances The Natural Corrosion Resistance Of Stainless Steel.
Phillips Drive Has An X-Shaped Slot That Accepts A Phillips Driver And Is Designed To Prevent Over-Tightening.
Pan Head Has A Flat Top And Short Vertical Sides With A Rounded Top Edge.
18-8 Stainless Steel Provides Good Corrosion Resistance And Strength.
Brand: Small Parts | Manufacturer: Small Parts
Dimensions: 0.00 x 0.75 x 0.00 Inches | Weight: 0.00 pounds
See On Amazon #25
NPT Thread Forming Taps - 5 Pieces 1/8", 1/4", 3/8", 1/2", 3/4" Pipe Taps Set with Storage Box Drill Bits for Cleaning or Re-thread Damaged or Jam Pipe Threads, High-speed Steel Material
Asin: B09H5LSL6N | Model: 5 Piecestft | PartNumber: 5 Piecestft
Features
- High quality materials: If you need to clean or re-thread damaged or jammed pipe threads, look no further than our NPT Thread Forming Taps. This 5-piece set includes 1/8", 1/4", 3/8", 1/2", and 3/4" pipe taps, each made of high-speed steel material for durability and long-lasting use. Our taps are forged from composite steel (GCR15) material, hardened to a higher hardness (traditional 45# carbon steel hardness is 44; composite steel hardness is 61).
- 5 pcs NPT Pipe taps used for clean and or re-thread damaged or jam pipe threads, Cuts internal threads in pipes. It is used for the repair of rusted, broken and slippery threads of water pipe joints. They are available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP) and come in the following sizes: 1/8 - 27 npt, 1/4 - 18 npt, 3/8 - 18 npt, 1/2 - 14 npt, and 3/4 - 14 npt.
- Nominal size of the tap is that of the pipe fitting being tapped. Our pipe taps feature a square universal chuck that can be used with either a manual wire twister or a tap machine, making them convenient and fast to use. The round shank with square end and straight flute tools allow chips to collect in the flutes as they cut, making them well-suited for most applications in shallow cuts.
- The thread is standard, clear, and the cutting resistance is smaller than that of ordinary taps, which is the best choice for through-hole processing. Standard tooth spacing, no bad teeth, no burrs, making repair and maintenance a breeze. Slotted in the front section, chip removal in the upper phase, easy to repair, through holes and blind holes are available.
- Product Packaging Upgrade: The set comes with a convenient red storage box to keep the taps organized and easily accessible. The box also helps protect the taps from damage during transportation and storage. These thread forming taps are perfect for plumbers, mechanics, or anyone who works with pipes and fittings. Use them to create new threads or repair damaged threads quickly and efficiently.
- See more on Amazon...
Nominal Size Of The Tap Is That Of The Pipe Fitting Being Tapped. Our Pipe Taps Feature A Square Universal Chuck That Can Be Used With Either A Manual Wire Twister Or A Tap Machine, Making Them Convenient And Fast To Use. The Round Shank With Square End And Straight Flute Tools Allow Chips To Collect In The Flutes As They Cut, Making Them Well-Suited For Most Applications In Shallow Cuts..
Product Packaging Upgrade: The Set Comes With A Convenient Red Storage Box To Keep The Taps Organized And Easily Accessible. The Box Also Helps Protect The Taps From Damage During Transportation And Storage. These Thread Forming Taps Are Perfect For Plumbers, Mechanics, Or Anyone Who Works With Pipes And Fittings. Use Them To Create New Threads Or Repair Damaged Threads Quickly And Efficiently..
The Thread Is Standard, Clear, And The Cutting Resistance Is Smaller Than That Of Ordinary Taps, Which Is The Best Choice For Through-Hole Processing. Standard Tooth Spacing, No Bad Teeth, No Burrs, Making Repair And Maintenance A Breeze. Slotted In The Front Section, Chip Removal In The Upper Phase, Easy To Repair, Through Holes And Blind Holes Are Available..
5 Pcs Npt Pipe Taps Used For Clean And Or Re-Thread Damaged Or Jam Pipe Threads, Cuts Internal Threads In Pipes. It Is Used For The Repair Of Rusted, Broken And Slippery Threads Of Water Pipe Joints. They Are Available In National Pipe Taper (Npt) And British Standard Pipe Taper (Bsp) And Come In The Following Sizes: 1/8" - 27 Npt, 1/4" - 18 Npt, 3/8" - 18 Npt, 1/2" - 14 Npt, And 3/4" - 14 Npt..
Brand: JTWKING | Manufacturer: JTWKING
See On Amazon #26
Small Parts 0406LPP410 410 Stainless Steel Thread Rolling Screw for Plastic, Passivated Finish, Pan Head, Phillips Drive, #4-20 Thread Size, 3/8" Length (Pack of 50)
Asin: B00GDYBCZO | Model: 0406LPP410 | PartNumber: 0406LPP410
Features
- Thread rolling screw recommended for use in plastic
- 410 stainless steel has high strength and hardness, and resists corrosion in mild environments
- Passivated finish enhances the natural corrosion resistance of stainless steel
- Pan head has a flat top and short vertical sides with a rounded top edge
- Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening
- See more on Amazon...
Passivated Finish Enhances The Natural Corrosion Resistance Of Stainless Steel.
Phillips Drive Has An X-Shaped Slot That Accepts A Phillips Driver And Is Designed To Prevent Over-Tightening.
Pan Head Has A Flat Top And Short Vertical Sides With A Rounded Top Edge.
410 Stainless Steel Has High Strength And Hardness, And Resists Corrosion In Mild Environments.
Brand: Small Parts | Manufacturer: Small Parts
Dimensions: 0.00 x 0.38 x 0.00 Inches | Weight: 0.00 Pounds
See On Amazon #27
Gordon Glass Thread Forming Screws for Plastics (48-2) / Pan Head, Phillips Drive, 8-16 Thread Size, 3/4" Length (100)
Asin: B0CW3MDBST | Ean: 0096523258714 | UPC: 096523258714
Features
- Thread Forming Screws for Plastic
- Thread rolling screw recommended for use in plastic
- Size: #8, Thread Pitch: 8-16, Length: 3/4
- Head Style: Pan Head, Drive Style: Phillips, Driver Size: 2
- Fully Threaded, Material: Steel, Finish: Zinc, RoHS: Compliant
- See more on Amazon...
Size: #8, Thread Pitch: 8-16, Length: 3/4".
Fully Threaded, Material: Steel, Finish: Zinc, Rohs: Compliant.
Head Style: Pan Head, Drive Style: Phillips, Driver Size: 2.
Thread Rolling Screw Recommended For Use In Plastic.
Brand: Gordon Glass Co. | Manufacturer: Gordon Glass Co.
Dimensions: 0.10 x 0.75 x 0.05 Inches | Weight: 0.10 pounds
See On Amazon #28
Kodiak Cutting Tools KCT210483 USA Made Roll/Thread Forming Tap, H5 Limit, Plug Style, High Speed Steel, TiN Coated, 5/16-24 Size
Asin: B007BTQ10Q | Model: KODIAK210483 | PartNumber: KODIAK210483
1-1/8 Thread Length.
H5 Limit.
2-23/32 Overall Length.
.318 Shk Dia.
Brand: Kodiak Cutting Tools | Manufacturer: Kodiak Cutting Tools
See On Amazon #29
Small Parts 0204LPPBZ Steel Thread Rolling Screw for Plastic, Black Zinc Plated, Pan Head, Phillips Drive, #2-28 Thread Size, 1/4" Length (Pack of 100)
Asin: B00GDYG5CE | Model: 0204LPPBZ | PartNumber: 0204LPPBZ
Features
- Thread rolling screw recommended for use in plastic
- Steel is often used in applications where strength is the primary consideration
- Zinc plating resists corrosion and has a black reflective appearance
- Pan head has a flat top and short vertical sides with a rounded top edge
- Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening
- See more on Amazon...
Zinc Plating Resists Corrosion And Has A Black Reflective Appearance.
Phillips Drive Has An X-Shaped Slot That Accepts A Phillips Driver And Is Designed To Prevent Over-Tightening.
Pan Head Has A Flat Top And Short Vertical Sides With A Rounded Top Edge.
Steel Is Often Used In Applications Where Strength Is The Primary Consideration.
Brand: Small Parts | Manufacturer: Small Parts
Dimensions: 0.00 x 0.25 x 0.00 Inches | Weight: 0.00 pounds
See On Amazon #30
Small Parts 1420FSW Steel Thread Cutting Screw, Zinc Plated Finish, Hex Washer Head, Slotted Drive, Type F, 1/4"-20 Thread Size, 1-1/4" Length (Pack of 25)
Asin: B00GX0ZJLG | Model: 1420FSW | PartNumber: 1420FSW
Features
- Thread cutting screw with type F point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic
- Steel is often used in applications where strength is the primary consideration
- Zinc plating resists corrosion and has a reflective appearance
- Hex washer head has a flange for additional grip with the mating surface
- Slotted drive has a linear slot for use with a flat-blade driver
- See more on Amazon...
Zinc Plating Resists Corrosion And Has A Reflective Appearance.
Slotted Drive Has A Linear Slot For Use With A Flat-Blade Driver.
Hex Washer Head Has A Flange For Additional Grip With The Mating Surface.
Steel Is Often Used In Applications Where Strength Is The Primary Consideration.
First Available: 05/15/2017
Brand: Small Parts | Manufacturer: Small Parts
Dimensions: 0.00 x 1.25 x 0.00 Inches
See On Amazon
Looking For Something Else?
Search