ADV-AIRSOFT - Buying Guide
Last Updated: 05/14/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
ADV-AIRSOFT Brushless Motor for AEG, Long Shaft CNC Motor for 7.4V-11.1V LiPo, Compatible with Gearbox V2 (Long Type, High Torque)
Asin: B0CC9K5RXL | Model: BLM-HT03-L | PartNumber: BLM-HT03-L | Ean: 4712805508075
Ultra Fast Response: If You’Re Looking For Ultra-Fast Response With Little Delay, Or You Play Primarily In Semi-Auto, Look No Further. The Motor Is Designed To Withstand 7.4V And 11.1V Lipo Batteries, Providing Speed Up To 32,000Rpm With 7.4V; And 48,000Rpm With 11.1V Batteries..
Note: Choose Between The Long Shaft Brushless Motor For Gearbox V2 Or The Short Shaft Brushless Motor For Gearbox V3 According To Your Requirements. Both High Torque Brushless Motors Can Achieve Impressive Speeds Of Up To 48,000 Rpm On An 11.1V Battery, Ensuring You Have The Ideal Fit For Your Airsoft Setup..
Durable & Easy To Install: Made Out Of Cnc Machined Aluminum With Anodized Surfaces For Improved Heat Dissipation, Maintain High Performance At All Times. For Installation, Simply Swap Out The Original Carbon Brush Motor And You’Re Good To Go. No Modification Required..
Smart, Precise, And Safe: Featuring A Control Circuit With Cpu And Low Internal Resistance Mosfet, The Motor Operation Is Precisely Regulated, Allowing It To Be Twice As Efficient Than Conventional Motors In Converting. Additionally, The Control Circuit Offers Low Voltage, Overheating, And Overload Protection For The Battery..
Features
- MOTOR THAT LASTS: Contrary to conventional brushed motors that generate high heat and get worn out quickly, brushless motors does not need to be in contact with the stator and can be 30-40% more efficient than its brush counterparts, thus extending its service life 10 times that of carbon brush motors.
- SMART, PRECISE, AND SAFE: Featuring a control circuit with CPU and low internal resistance MOSFET, the motor operation is precisely regulated, allowing it to be twice as efficient than conventional motors in converting. Additionally, the control circuit offers low voltage, overheating, and overload protection for the battery.
- ULTRA FAST RESPONSE: If you re looking for ultra-fast response with little delay, or you play primarily in semi-auto, look no further. The motor is designed to withstand 7.4V and 11.1V LiPo batteries, providing speed up to 32,000rpm with 7.4V; and 48,000rpm with 11.1V batteries.
- DURABLE & EASY TO INSTALL: Made out of CNC machined aluminum with anodized surfaces for improved heat dissipation, maintain high performance at all times. For installation, simply swap out the original carbon brush motor and you re good to go. No modification required.
- Note: Choose between the Long Shaft Brushless Motor for Gearbox V2 or the Short Shaft Brushless Motor for Gearbox V3 according to your requirements. Both High Torque Brushless Motors can achieve impressive speeds of up to 48,000 rpm on an 11.1V battery, ensuring you have the ideal fit for your airsoft setup.
- See more on Amazon...
Brand: ADV-AIRSOFT | Manufacturer: KWTRC TECHNOLOGY CO., LTD.
Dimensions: 1.18 x 3.54 x 1.10 inches
See On Amazon #2
ADV-AIRSOFT Brushless Motor Pinion Gear Replacing Parts, Compatible with High-Speed, High Torque, High Efficiency Brushless Motor, Included Two M3X2 Screws and One Pinion Gear
Asin: B0CC9TWHLN | Ean: 4712805508129
Gadgets Needed Before Starting The Process: You Will Need To Prepare A 1.5Mm Hex Screwdriver, Heat Gun, Thread Locker Fluid Before Start Up The Replacing Procedure.
Caution: Before Changing The Pinion Gear Of Brushless Motor, Make Sure That You Have The Base Knowledge Before Using Of All These Items; If You Are Not Sure How To Start Up, Please Contact Us For Further Help.
Steps Of Replacing Pinion Gears: First, Heat Pinion Gear To 150-180 Degrees. Furthermore, Loosen The Screws And Remove Pinion Gear. Last Of All, Apply New Pinion Gear And Lock Screws Tight..
Inside The Bag: This Repair Kits Come Up With A Pinion Gear And Two Pieces Of M3x2 Screws That Will Be Needed In The Process Of Changing Pinion Gears.
Features
- Updating Equipment Easily : Thanks to the come out of repairing kits, it is convenient to replace chewed up pinion gear of brushless motor before taking part in another Airsoft
- Inside The Bag: This repair kits come up with a pinion gear and two pieces of M3X2 screws that will be needed in the process of changing pinion gears
- Gadgets Needed Before Starting The Process: You will need to prepare a 1.5mm Hex Screwdriver, Heat Gun, Thread Locker Fluid before start up the replacing procedure
- Steps of Replacing Pinion Gears: First, heat pinion gear to 150-180 degrees. Furthermore, loosen the screws and remove pinion gear. Last of all, apply new pinion gear and lock screws tight.
- Caution: Before changing the pinion gear of brushless motor, make sure that you have the base knowledge before using of all these items; if you are not sure how to start up, please contact us for further help
- See more on Amazon...
Brand: ADV-AIRSOFT | Manufacturer: KWTRC TECHNOLOGY CO., LTD.
Dimensions: 0.05 x 0.51 x 0.30 inches
See On Amazon #3
ADV-AIRSOFT Rear Wired ETU for M4 AEG, Programmable MOSFET ETU Safety Protection
Asin: B0CC9LB51C | Model: TC4-01R | PartNumber: TC4-01R | Ean: 4712805508099
Adjustable Precocking: 5 Levels Of Pre-Cocking Gives You The Utmost Control Over Unit Response. Whether You Prefer Snappy Or Longer Travels, We’Ve Got You Covered. Alternatively, You Can Also Release The Spring To Reduce The Stress And Tension On The Spring And Prevent Wear And Tear On The Gearbox..
M4 Ver.2 Gearbox Compatible: This Etu Is Compatible Exclusively With The Standard M4 Ver.2 Gearbox While Supporting Brushless And Brushed Motors. Note That The Etu Can Only Be Used With 7.4V - 11.1V Lithium Batteries.
Safety Protection: The Adv Etu Comes With A Slew Of Safety Mechanisms To Protect The Internals And Battery. The Protections Include Low Voltage Protection, Overcurrent Protection, Motor Damage Protection, As Well As Gearbox Damage Protection..
Burst Mode: 3-Round Or 5-Round Burst Can Be Configured To Replace Auto Mode, Allowing Rapid Shots And Tighter Grouping To Be Achieved. Two-Stage Mode Is Another Effective Feature To Give You An Edge On The Field. Simply Half-Pull The Unit To Shoot A Single Shot, Full-Pull The Unit To Shoot Full-Auto..
Features
- BINARY MODE: Shoot twice as fast with just a single pull of the unit. Under binary mode, shots are shot when the unit is pulled AND released. Doubling your rate of shooting can now be easily achieved without exhaustive modifications.
- BURST MODE: 3-round or 5-round burst can be configured to replace Auto mode, allowing rapid shots and tighter grouping to be achieved. Two-stage mode is another effective feature to give you an edge on the field. Simply half-pull the unit to shoot a single shot, full-pull the unit to shoot full-auto.
- ADJUSTABLE PRECOCKING: 5 levels of pre-cocking gives you the utmost control over unit response. Whether you prefer snappy or longer travels, we ve got you covered. Alternatively, you can also release the spring to reduce the stress and tension on the spring and prevent wear and tear on the gearbox.
- SAFETY PROTECTION: The ADV ETU comes with a slew of safety mechanisms to protect the internals and battery. The protections include low voltage protection, overcurrent protection, motor damage protection, as well as gearbox damage protection.
- M4 VER.2 GEARBOX COMPATIBLE: This ETU is compatible exclusively with the standard M4 Ver.2 gearbox while supporting brushless and brushed motors. Note that the ETU can only be used with 7.4V - 11.1V lithium batteries
- See more on Amazon...
Brand: ADV-AIRSOFT | Manufacturer: KWTRC TECHNOLOGY CO., LTD.
See On Amazon #4
ADV-AIRSOFT Brushless Motor for AEG, Short Shaft CNC Motor for 7.4V-11.1V LiPo, Compatible with Gearbox V3 (Short Type, High Speed)
Asin: B09X9TW918 | Ean: 4712805507726
Ultra Fast Response: If You’Re Looking For Ultra-Fast Response With Little Delay, Or You Play Primarily In Semi-Auto, Look No Further. The Motor Is Designed To Withstand 7.4V And 11.1V Lipo Batteries, Providing Speed Up To 36,000Rpm With 7.4V; And 54,000Rpm With 11.1V Batteries..
Note: Choose Between The Long Shaft Brushless Motor For Gearbox V2 Or The Short Shaft Brushless Motor For Gearbox V3 According To Your Requirements. Both High Speed Brushless Motors Can Achieve Impressive Speeds Of Up To 54,000 Rpm On An 11.1V Battery, Ensuring You Have The Ideal Fit For Your Airsoft Setup..
Durable & Easy To Install: Made Out Of Cnc Machined Aluminum With Anodized Surfaces For Improved Heat Dissipation, Maintain High Performance At All Times. For Installation, Simply Swap Out The Original Carbon Brush Motor And You’Re Good To Go. No Modification Required..
Smart, Precise, And Safe: Featuring A Control Circuit With Cpu And Low Internal Resistance Mosfet, The Motor Operation Is Precisely Regulated, Allowing It To Be Twice As Efficient Than Conventional Motors In Converting. Additionally, The Control Circuit Offers Low Voltage, Overheating, And Overload Protection For The Battery..
Features
- MOTOR THAT LASTS: Contrary to conventional brushed motors that generate high heat and get worn out quickly, brushless motors does not need to be in contact with the stator and can be 30-40% more efficient than its brush counterparts, thus extending its service life 10 times that of carbon brush motors.
- SMART, PRECISE, AND SAFE: Featuring a control circuit with CPU and low internal resistance MOSFET, the motor operation is precisely regulated, allowing it to be twice as efficient than conventional motors in converting. Additionally, the control circuit offers low voltage, overheating, and overload protection for the battery.
- ULTRA FAST RESPONSE: If you re looking for ultra-fast response with little delay, or you play primarily in semi-auto, look no further. The motor is designed to withstand 7.4V and 11.1V LiPo batteries, providing speed up to 36,000rpm with 7.4V; and 54,000rpm with 11.1V batteries.
- DURABLE & EASY TO INSTALL: Made out of CNC machined aluminum with anodized surfaces for improved heat dissipation, maintain high performance at all times. For installation, simply swap out the original carbon brush motor and you re good to go. No modification required.
- Note: Choose between the Long Shaft Brushless Motor for Gearbox V2 or the Short Shaft Brushless Motor for Gearbox V3 according to your requirements. Both High Speed Brushless Motors can achieve impressive speeds of up to 54,000 rpm on an 11.1V battery, ensuring you have the ideal fit for your airsoft setup.
- See more on Amazon...
Brand: ADV-AIRSOFT | Manufacturer: KWTRC TECHNOLOGY CO., LTD.
Dimensions: 1.18 x 2.76 x 1.10 inches
See On Amazon