Autool - Buying Guide

Bestselling from Autool on Amazon

1. Smoke Machine Automotive Leak Detector,Evap Vacuum Smoke Diagnostic Tester,Pipeline Fuel Leakage Det...
2. AUTOOL Car Spark Plug Tester,Automotive Engine Ignition Plug Analyzer 110V with Protective Cover Spa...
3. AUTOOL Automotive Smoke Machine Leak Detector,Evap Vacuum Smoke Diagnostic Tester,Pipeline Fuel Leak...
4. AUTOOL Timing Light Automotive Ignition Timing Light 12V, Engine Timing Gun Strong Flash Timing Ligh...
5. Flush Cleaner Adapter For Car Fuel Injector Tester Fuel Pump Pressure Test Automotive Diesel Gas Inj...
6. EVAP Vacuum Automotive Smoke Machine Leak Detector Diagnostic Tester
7. Smoke Cone Leak Detector Exhaust Intake Boot Adapter Diagnostics for Automotive EVAP Leak Locator Tester
8. AUTOOL Walnut Blaster, Engine Intake Valve Cleaner Machine, Automotive Engine Carbon Remover, Walnut...
9. AUTOOL Fuel Injector Tester and Cleaner 12V & High Volt, Fuel Injector Cleaning Tool Kit for GDI, Ad...
10. Universal Easy Intake Adapter for 12V Vehicle Pipes Fuel Leakage Detector Diagnositc Tester

Features

• Why Need It For example: 1. The rupture of the vacuum hose will cause the mixture to be too thick, the idle speed will increase, the hot car will not start well, the engine will surge during acceleration, the fuel consumption will increase significantly, and the exhaust pipe will emit black smoke. 2. Blocking will cause the idle speed to drift, and the idle speed is easy to stall. 3. Air leakage in the vacuum tube will cause the engine to run weakly
• No Air Pump Connect shop air supply, connect 12V vehicle power, introduce shop air to the AUTOOL SDT103 fuel leak tester, turn the Flow Dial anti-clockwise to open the air flow, switch on the power at the back of the unit, then AUTOOL SDT103 smoke machine automotive will start to generate smoke.
• External Flow Meter You can easily control the air pressure, because the air pressure of each pipe in the car is different. If the air pressure is too high, the pipe will be damaged, and if the air pressure is too low, the leak will not be detected. Therefore, the flow meter is very important to protect your detection system more effectively. Make testing safer
• EVAP Detection American cars that began production in 1996 are equipped with EVAP service ports; in most American cars, the EVAP service port is usually located in the engine compartment, but the EVAP service port of some special models may be located in other locations. Open the plastic cover of the EVAP service port, then use the spool wrench to remove the check valve clockwise, then install the EVAP service port adapter, and introduce smoke from the port into the EVAP leak detection system.
• Wide Testing Range The smoke leak detector can do smoke testing of multiple systems, such as EVAP systems, Intake Systems, Cooling / EGR /Exhaust Systems, Crankcase Systems, Engine Airtightness, Vacuum Leaks, Low Pressure Turbo leaks.Applicable cars, motorcycles, snowmobiles, off-road vehicles, ATVs, light trucks and speedboats boats.
• Three Years Warranty and Lifelong Maintenance For the damage caused by non-human factors, AUTOOL promises to resend the parts for free within 3 years. For any demand, we warmly welcome you to tell us, and we will reply you as soon as possible within 24 hours.
• See more on Amazon...

Features

• Why Do You Need It? By comparing the spark intensities of the two spark plugs,judge the performance and ignition intensity of the spark plugs,and replace the broken spark plugs in time. Spark plug tester has two spark plug socket, you could compare and test to make an accurate judgment at the same time. The design of the protective cover can prevent you from the risk of electric shock during the test,which effectively guarantees your safety during the operation.
• Widely Application 12V Gasoline vehicles car spark plugs, 100V-240V input voltage . used to test 12V gasoline vehicles car spark plugs (a diameter of 12mm).Universal for spark plug tests crankshaft engines and motorcycles.
• Time-saving & Efficient The working principle of the car spark plug tester is to test the performance of the spark plug by simulating the work of the engine. Suitable for spark plugs of most 12V gasoline cars.
• Easy Plug and Play Spark tester automotive is easy to operate, and you can start using it after connecting the adapter. you can adjust the working frequency in the range of 0~6000rpm .Spark plug tester can also simulate the work of the engine, Restore car start which can better test the spark plug.
• Humanized Design In order to make the use process safer, the spark plug tester comes with the latest car spark tester with a special protective cover design. Cover the protective cover before use to ensure the safety of the operator during the test and observe the test results visually.
• High Quality Made of durable ABS material,which has the characteristics of impact resistance and heat resistance.Lightweight and portable, can be placed in the repair package for a long time.
• Three Years Warranty and Lifelong Maintenance For the damage caused by non-human factors, AUTOOL promises to resend the parts for free within 3 years. For any demand, we warmly welcome you to contact us, and we will reply you as soon as possible within 24 hours.
• See more on Amazon...

Features

• Why Need It For example: 1. The rupture of the vacuum hose will cause the mixture to be too thick, the idle speed will increase, the hot car will not start well, the engine will surge during acceleration, the fuel consumption will increase significantly, and the exhaust pipe will emit black smoke. 2. Blocking will cause the idle speed to drift, and the idle speed is easy to stall. 3. Air leakage in the vacuum tube will cause the engine to run weakly
• No Air Pump Connect shop air supply, connect 12V vehicle power, Press the AUTOOL SDT101 smoke control switch, the indicator lights on, wait for about 10 seconds, insert the cone head on the smoke outlet pipe into the air inlet cone adapter when the smoke becomes thick.Wait for about 1 to 2 minutes, you can use a flashlight with strong light to help find the leaks in the pipeline and then AUTOOL SDT101 smoke machine automotive will diagnose the leakage status.
• Wide Testing Range The smoke leak detector can do smoke testing of multiple systems, such as EVAP systems, Intake Systems, Cooling / EGR /Exhaust Systems, Crankcase Systems, Engine Airtightness, Vacuum Leaks, Low Pressure Turbo leaks.Applicable cars, motorcycles, snowmobiles, off-road vehicles, ATVs, light trucks and speedboats boats.
• EVAP Detection American cars that began production in 1996 are equipped with EVAP service ports; in most American cars, the EVAP service port is usually located in the engine compartment, but the EVAP service port of some special models may be located in other locations. Open the plastic cover of the EVAP service port, then use the spool wrench to remove the check valve clockwise, then install the EVAP service port adapter, and introduce smoke from the port into the EVAP leak detection system.
• Advanced and Safe The AUTOOL SDT101 evap smoke machine with thick smoke output detects even the smallest leaks. It is safe and reliable as there is no need to start the vehicle during use. And the smoke output is healthy and harmless. Moreover, when this smoke leak detector can be smart power off, the power will be automatically shut off when it exceeds the 75 housing limit.
• Three Years Warranty and Lifelong Maintenance For the damage caused by non-human factors, AUTOOL promises to resend the parts for free within 3 years. For any demand, we warmly welcome you to tell us, and we will reply you as soon as possible within 24 hours.
• See more on Amazon...

Features

• Advance Function The timing light is designed to re-timing your car's ignition to get the best performance that you can.Capable of testing the ignition timing scale on the engine flywheel or belt pulley intuitively to adjust appropriately.Able to detect the automotive knock suppression control system and vacuum advance angle control system, change its advance angle with the speed change.
• Strong Flash & Sliding Sensor Clips The sensor clip is red and black to distinguish positive and negative poles, easy to use and more secure. It's sliding clamp-on inductive pick-up, for easy and safe hookup.The special blue-white xenon tube can produce a very strong flash,so that it can work even in the daylight.
• Multiple Protection Functions The ignition timing light has the function of reverse polarity and overload protection, which can effectively protect the safety of batteries and equipment. In addition, the metal alligator clip is also covered with a rubber sleeve protector, which is safer to apply.
• Wide Application This engine timing light is suitable for automobiles, motorcycles, ATVs, RVs, boats and all two-stroke or four-stroke gasoline engines, easily operate on 12V ignition systems. Its speed is up to 1000rpm.
• Handle Pistol-type design Ergonomically designed with comfortable press keys, great Press feeling and easy operation.The shell of ignition timing light is made of high-quality ABS material, which is durable and can maximize the service life.
• Three Years Warranty For any quality problems. If AUTOOL Timing Light has any defect, we will provide new replacement or solutions for our customers until satisfaction without delay, and provides lifetime technical support. For any needs, you are warmly welcomed to contact us and we will get back to you ASAP within 24 hours.
• See more on Amazon...

Features

• Main Usage As an adapter for DIY cleaning the fuel injector nozzle, removed the injector from the engine, it can be cleaned separately. When the injector is clogged, you can use it to save expensive nozzles,This DIY Injector Cleaner adaptor kit is easily to clean most car motorcycle fuel injectors.Universal fit any 12 - 24V car, motorcycle, electric car, ATV, Boat and so on.
• Working principle The electrical port of the Injector connect the 12V power by this cable. When the current is switched on, the solenoid valve in the nozzle is opened. Meanwhile cleaning liquid flush through white tube by liquid pressure in CARB cleaner bottles, then through injector to clean it.
• Working requirements It needs the combination of 12V DC power supply and aerosol of Injector or carburetor cleaner ( not included ). Please prepare these necessary tools
• Package Covers The package consists of two white tubes and two alligator clip charging cables, which accommodate 2 different sizes of fuel injectors.
• Special Note Need a fuel jet cleaning agent aerosol cans (not included) and DC 12V DC battery power (not included), do not need compressed air.
• Three Years Warranty and Lifelong Maintenance For the damage caused by non-human factors, AUTOOL promises to resend the parts for free within 3 years. For any demand, we warmly welcome you to contact us, and we will reply you as soon as possible within 24 hours.
• See more on Amazon...

Features

• Why Need It For example: 1. The rupture of the vacuum hose will cause the mixture to be too thick, the idle speed will increase, the hot car will not start well, the engine will surge during acceleration, the fuel consumption will increase significantly, and the exhaust pipe will emit black smoke. 2. Blocking will cause the idle speed to drift, and the idle speed is easy to stall. 3. Air leakage in the vacuum tube will cause the engine to run weakly
• Built-in Air Pump Customers do not need to purchase additional air pumps, we use high-quality materials, after many tests, please rest assured to use. You can save more time and money
• EVAP Detection American cars that began production in 1996 are equipped with EVAP service ports; in most American cars, the EVAP service port is usually located in the engine compartment, but the EVAP service port of some special models may be located in other locations. Open the plastic cover of the EVAP service port, then use the spool wrench to remove the check valve clockwise, then install the EVAP service port adapter, and introduce smoke from the port into the EVAP leak detection system.
• External Pressure Gauge You can observe the barometer to more accurately determine whether the car pipeline is leaking. If the barometer index keeps increasing, there is no problem with your car s pipeline. If the barometer index keeps decreasing, your car s pipeline leaks need to be repaired, and there is a barometer test. Leakage is faster and more accurate
• External Flow Meter You can easily control the air pressure, because the air pressure of each pipe in the car is different. If the air pressure is too high, the pipe will be damaged, and if the air pressure is too low, the leak will not be detected. Therefore, the flow meter is very important to protect your detection system more effectively. Make testing safer
• Three Years Warranty and Lifelong Maintenance For the damage caused by non-human factors, AUTOOL promises to resend the parts for free within 3 years. For any demand, we warmly welcome you to tell us, and we will reply you as soon as possible within 24 hours.
• See more on Amazon...

Features

• New Larger Size AUTOOL smoke cone Will fit almost all exhaust tips and intake boots. Made for larger openings with a diameter up to 3.26 inches (83mm) and as small as 1 inch (26mm)
• Powerful Function AUTOOL smoke cone Works with all automotive smoke machine leak testers. It can be used for checking leaks on turbo system piping, leak testing exhaust system, also smoke testing evaporative emissions system.
• High Quality AUTOOL smoke cone is made of high-quality rubber material, with excellent sealing performance, The easy intake adapter can be used with any smoke machine or diagnostic leak detector to reduce the workload of leak checks.
• Easy to Use AUTOOL smoke cone Install the smoke cone adapter to the location where diagnosis is needed (such as the air inlet/pipe or exhaust pipe), and then connect the automotive evap smoke machine leak tester to inject the smoke to quick locator the leak part.
• Widely Compatible AUTOOL smoke cone 100% compatible with car intake and exhaust ports, including small cars and heavy trucks. passing steam, detecting leaks in the car intake/exhaust system, Save more time and money and reducing leakage check the workload to realize quick repair
• Three Years Warranty and Lifelong Maintenance For the damage caused by non-human factors, AUTOOL promises to resend the parts for free within 3 years. For any demand, we warmly welcome you to contact us, and we will reply you as soon as possible within 24 hours.
• See more on Amazon...

Features

• Deep Removal of Carbon Deposits AUTOOL HTS558 Intake Valve Cleaner can deeply remove the highly sticky carbon deposits on the intake manifold, intake & exhaust valves to help the engine keep health Solve the problems of unstable idling, insufficient fuel combustion, and reduced air-fuel ratio).
• Safe & Efficient The Intake Pipe Valve Cleaner Machine uses walnut sand as cleaning agent. A large amount of pores on surface of walnut sand which provide super adsorption capacity, non-toxic and corrosion preventive. As an eco-friendly pure natural polish material, walnut sand has advantages of hardness, pressure resistance and wear resistance. It can clean the intake pipe and backside of the intake valve thoroughly without pipes damage and corrosion.
• Easy to Operation Turn off the engine before cleaning, then turn the crankshaft to close the intake valve, and use a high-pressure air pump (not included) to inject walnut powder (not included) into the intake port of the engine. The built-in dust filter of Automotive Engine Carbon Deposition Cleaner help to separate and recover walnut sand from carbon deposits, thus forming a complete cleaning closed loop.
• Integrated Design The walnut sand of Walnut Blaster Kit for Carbon Cleaning can be sprayed and recycled simultaneously. Built-in dust filter can separate the recovered walnut sand grit from carbon deposits for recycling. Walnut sand residual in intake pipe will go to ashes at high temperature after engine cranking to avoid damaging automotive exhaust systems & parts.
• 3 Years Warranty AUTOOL Automotive Engine Intake Pipe Valve Clean Machine has a three-year warranty.For damages caused by non-human factors, AUTOOL promise to resend power probe circuit tester parts for free within 3 years. For any needs, you are warmly welcome to contact us and we will get back to you ASAP within 24 hours.
• See more on Amazon...

Features

• Major Function AUTOOL CT60 fuel injector tester and cleaner is a professional machine specially used to easily solve common faults such as as stuck, blocked, leaked, or insufficient combustion of the fuel injector.
• Adjustable Working Frequency & Time Fuel injector tester is possible to set multiple pulse outputs and adjust speed, pulse width, operating time and other parameters as required. The operating frequency range can reach 600~4000 rpm, the working time setting range can reach 0~99 minutes.
• Standard Fuel Injector & High-Pressure Fuel Injector The fuel injector cleaning kit is not only suitable for standard injectors in gasoline engines, but also for high pressure injectors in diesel engines. Configurable 12V and high voltage drive options. The high voltage is suitable for 70V, 120V and other injectors.
• LCD Display The digital display shows the frequency and time of operation, so you can observe the injector condition and adjust the RPM at any time for flexible observation of the injector performance. This fuel injector cleaner tool is can also connect two injectors for the simultaneous operation to compare the sprayability status and the spray angle of the fuel injector.
• Perfect Match The drive mode of GDI injector added by this injector tester can be used as an upgrade kit with the old version of the machine. Can be used to enhance the pulse signal of all injectors and can be used with ultrasonic cleaners and older injector testers.
• Three Years Warranty For any quality problems. If CT60 has any defect, we will provide new replacement or solutions for our customers until satisfaction without delay, and provides lifetime technical support. For any needs, you are warmly welcomed to contact us and we will get back to you ASAP within 24 hours.
• See more on Amazon...

Features

• Excellent Quality AUTOOL Easy Intake Adapter is made of high-quality silicone, with strong sealing, softness, high temperature resistance, good elasticity, and tear resistance.All Easy Intake Adapters have undergone multiple simulation tests ensure can detect intake and exhaust leakage more quickly and accurately
• Fast and Convenient AUTOOL Easy intake adapter is an inflatable block-shaped airbag with a pressurized steam channel, which is used for intake and exhaust smoke test. The wall thickness is 1.5mm and its diameter can be expanded to 121mm. It helps technicians to quickly and easily test the entire intake or exhaust system Note: Please make sure the intake/exhaust diameter is bigger than 2.
• Humanized Design Compared to traditional,AUTOOL Easy intake adapter with a steel ring removed at the end in order to use a smaller fitting.can be tested the intake/exhaust diameter is bigger than 2 more quickly and accurately leakage .
• Widely Compatible AUTOOL Easy intake adapter 100% compatible with car intake and exhaust ports, including small cars and heavy trucks. The inflatable bladder can be used with all EVAP system flue gas leakage testers, passing steam, detecting leaks in the car intake/exhaust system, Save more time and money and reducing leakage check the workload to realize quick repair
• Widely Applicable AUTOOL Easy intake adapter is suitable for any shape of intake and exhaust system,Connect the instrument, manually squeeze the hand pump to inflate the airbag, and then perform additional testing.such as round, oval, square, rectangular, even large angle and difficult to reach intake and exhaust system (note: intake/exhaust diameter needs to be> 2 inches), it allows steam through, you can quickly diagnose any air intake problems on the vehicle duct.
• Three Years Warranty and Lifelong Maintenance For the damage caused by non-human factors, AUTOOL promises to resend the parts for free within 3 years. For any demand, we warmly welcome you to contact us, and we will reply you as soon as possible within 24 hours.
• See more on Amazon...

Features

• Heavy-Duty 2 ton scissor jack maximum lifting capacity: 2.0 tons (4,400 lbs). Lift operating distance increased from 4.13 inches to 17.3 inches.
• See more on Amazon...

Features

• Multi-functional Fuel Injector Cleaner Kit The fuel injector cleaner kit features high and low-pressure cleaning function for the whole fuel system, including throttle valve, fuel nozzle, TWC, intake manifold and exhaust pipe, etc. It can quickly and completely remove carbon deposits in about 20 minutes, efficiently restoring the vehicle's power and driving performance, and greatly reducing fuel consumption and exhaust emissions.
• Easy Operation The non-disassembled fuel injector cleaner kit has a special handling check valve for releasing gas and adding liquid. Adjustable pressure gauge up to 150PSI. The injector cleaning kit is made of high pressure quality stainless steel, scratch and corrosion resistant, safe and reliable. Cleaner canister capacity up to 1000ml to ensure pour enough fuel injector cleaner. NOTE This fuel injector cleaner kit does not contain cleaning fluid. It is only suitable for gasoline injectors, not for diesel injectors.
• Complete Adapters for Widely Applications The fuel injector cleaning kit includes a variety of different adapters, which can be used in almost all European Union, Asian, American cars and light trucks. Its main components and joints are made of brass, and the connecting tube is made of high quality rubber material, which has strong toughness and corrosion resistance, and the structure is more stable without oil leakage. The oil tubes are suitable for all cleaning fluid.
• Easy to Store and Transport The fuel injector cleaner kit is equipped with a heavy blow molded plastic box, which can withstand high-strength extrusion without deformation and protect the product from damage. After use, all products can be neatly placed in boxes for easy storage and transportation.
• Three Years Warranty For any quality problems. If C100 has any defect, we will provide new replacement or solutions for our customers until satisfaction without delay, and provides lifetime technical support. For any needs, you are warmly welcomed to contact us and we will get back to you ASAP within 24 hours.
• See more on Amazon...

Features

• Test Applications With the BT250 power circuit probe tester, you can test for voltage and polarity/continuity/signal circuits/bad ground contacts/short and open circuits. And most importantly, you can also use it to check the on/off of switches, relays and diodes, fuses and circuits, activating electronic components in your hands/in your vehicle/with a ground. It is the best electrical tester to reduce the diagnostic time of all 6-30 volt vehicle electrical systems.
• 4 Adjustable Modes Circuit Tester AC detects the maximum and minimum voltage, supply frequency and duty cycle of the circuit under test; DC detects the voltage value of the circuit under test. In addition,the circuit tester can also detects the resistance between the circuit probe under test and the auxiliary ground; Diode Test can quickly test the operation of the diode assembly and determines if it is conducting. The last mode is the audio tone mode.
• Wide Vehicles Application Electrical tester can support 6-30V cars, boats, trailers, ATV, motor homes and many other vehicles. With the ability to power components such as radiator fans, starter motors, relays, window regulators, windshield wipers, etc. Powered by the car battery or cigarette lighter, no extra battery or cable required.
• LED Indicator & Easy to Operate Power circuit probe tester built-in LED light allow you to work in the dark area, there will be beep tone when detecting,operate the tool without looking at the menu once you are familiar with the tone.Provide 4.9ft of electrical wire for easy use.
• Circuit Overload Protection The BT250 automotive circuit tester provides more safety for the user because it is protected by the inner circuit breaker. If overloaded, it will trip and automatically disconnect the protection circuit. The circuit breaker is a valuable test tool as well as a safety measure to protect the tool from overload and make the product more durable.
• See more on Amazon...

Features

• Why Need It The performance of the injector plays a vital role in the power of each engine. Poor fuel will cause the injector to work poorly, causing serious carbon deposits in the cylinder, accelerating cylinder barrel and piston ring wear, unstable idling, increased fuel consumption, weak acceleration, difficulty in starting, and excessive emissions; in severe cases, the injector will be completely blocked . Damage to the engine.
• Microcomputer Control Fuel pressure control through microcomputer offers stable pressure control and large adjustable range, which is suitable for all EGI vehicles and can help to achieve automatic
• Ultrasonic Cleaning The injector cleaning machine adopts ultrasonic powerful cleaning technology, which has a strong cleaning ability and can completely remove the stubborn carbon deposits on the fuel injector.
• Wide Application The fuel injector cleaner machine simulates various working conditions of the engine and can clean and inspect the fuel injectors of various motorcycles. Main functions: ultrasonic cleaning, uniformity detection, atomization observation, tightness test, fuel injection volume detection. The injector cleaner kit uses high-quality oil pumps to ensure long-term stable use.
• Digital Display With the help of microcomputer control and digital display, the equipment makes possible automatic cleaning, testing injectors and real-time monitoring of the dynamic values.
• Three Years Warranty and Lifelong Maintenance For the damage caused by non-human factors, AUTOOL promises to resend the parts for free within 3 years. For any demand, we warmly welcome you to contact us, and we will reply you as soon as possible within 24 hours.
• See more on Amazon...

Features

• [Ultrasonic Cleaning with Heating the Fluid]: Different from others, CT160 is able to heat the cleaning fluid, which can improve a lot on cleaning effect. With that advantage, ultrasonic cleaning can be more powerful to remove the attachments and internal blockages on the injectors.
• [9 Kinds of Fuel Injector Tests]: CT160 Fuel injector Cleaner is capable of various testing, including 2-idle speed test, 3-medium speed test, 4-high speed test, 5-accelerating test, 6-variable speed test, 7-leakage test, 8-idle spray test, 9-medium spray test, 10-high spray volume test.
• [ Compact/Lightweight/Portable]: CT160 Fuel injector Cleaner only weighs 8KG, allowing to carry around. With 2000ML large capacity ultra cleaning tank, all injectors can be cleaned at one time, which save much time and more efficient.
• [Environmental Friendly& Widely Use]: The used cleaning fluid and testing fluid can be easily recovered. Support most of the automobile and motorcycles in the market. Applicable voltage is compatible with 110V or 220V.
• [Microcomputer Control]: Fuel pressure control through microcomputer offers stable pressure control and large adjustable range, which is suitable for all EGI vehicles and can help to achieve automatic
• [Digital Display]: CT160 Injector Cleaner Tester with the help of microcomputer control and digital display, the equipment makes possible automatic cleaning, testing injectors and real-time monitoring of the dynamic values.
• [Three Years Warranty, Lifetime Maintenance]: For damage caused by non-human factors, we promises to resend parts for free within 3 years. For any needs, you are warmly welcomed to contact us and we will get back to you ASAP within 24 hours.
• See more on Amazon...

Features

• Multi-function Display The car OBD smart digital meter with a variety of operating interface modes, LED display can be switched freely, coolant temp., fuel consumption and engine speed monitor and driving speed,etc, which will bring more fun and technological sense to you.
• Multiple Detection This smart speed gauge also allows you to tracking the coolant temperature, fuel consumption tracker and engine speed monitor.
• Read & Clear Car Fault Code With code definitions, such as Reading Codes Scan error Codes & Clear Data Stream, diagnosing and repairing is now easier than ever. Supports full OBD protocols car.
• Smart Light Senor & 2.4 HD Screen Smart light sensing adjusts brightness, making it easier to check data. Large 2.4 HD screen present a better vision experience.
• Safety Alarm Functions X50 Plus Car OBD Multi-function Meter allows supporting water temperature early alarm, over-speed early alarm, shifting reminding early alarm and vehicle fault early alarm.
• Note Please refer to the details when purchasing. There are incompatible models. If you are not sure, please consult before purchasing.
• Service Guarantee If you have any problem , you can contact our customer service for a free replacement in three year. And there is a technical support for timely and effectively solving the quality problem within 24 Hours.
• See more on Amazon...

Features

• More Powerful Detection Range Automotive Brake Fluid Detector is common fit for most vehicle. Check the health status of DOT-3, DOT-4, DOT-5.1 brake fluid and also most synthetic brake fluids. The brake fluid tester is designed with normal mode and expert mode. The expert mode is convenient for professional mechanics to select the corresponding brake fluid model for accurate testing.
• Precision test and sensitive probe Equipped with a highly sensitive sensor and a 260mm foldable hose, can quickly and accurately detect DOT-3, DOT-4, DOT-5.1 brake fluid and has received the result in seconds. The outer layer of the hose is made of 304 stainless steel, which has the characteristics of oil resitance, oxidation resistance, and corrosion resistance. The foldable probe can rotate 180 degree,you can choose any angle to testing.
• Easy Instant Read 2.8 inches high resolution screen, instant display result, large display with backlight, easy and clear reading in sun or night. In addition, if the brake fluid contains too much water, the buzzer will alarm to remind you to change the brake fluid.
• Water Content Percentage OK icon indicates that the moisture content is between 0% and 2%. The brake fluid performance is fine; The icon indicates a moisture content of 2% to 3%. The brake fluid performance is OK, but it need to be detected and observed in the near future; The icon indicates that the moisture content is above 3%. The brake fluid performance is poor, it need to be replaced.
• Three Years Warranty For any quality problems. If AS502 has any defect, we will provide new replacement or solutions for our customers until satisfaction without delay, and provides lifetime technical support. For any needs, you are warmly welcomed to contact us and we will get back to you ASAP within 24 hours.
• See more on Amazon...

Features

• Why Need It The performance of the injector plays a vital role in the power of each engine. Due to the fuel quality, the injector cannot work normally, causing serious carbon deposits in the cylinder; accelerating the cylinder bore and piston ring, causing unstable idling, increased fuel consumption, weak acceleration, difficulty in starting, excessive emissions, and complete blockage of the injector. Cause damage to the engine, so the injector should be cleaned regularly.
• GDI Design Adopts latest GDI design, it is not only can be used to clean and test standard injectors, but also to implement GDI injectors, AUTOOL CT400 GDI fuel injector cleaner and tester is the newest version of fuel injector cleaner series. Compatible with Mercedes-Benz, BMW, Audi, Porsche, Ford, and other direct injection engines.
• 12V, 70V, 120V Using the latest and unique GDI injector driver software, AUTOOL CT400 6-cylinder fuel injector cleaning machine can drive 12V, 70V, 120V high pressure injectors Compared with other cleaning machines and testing machines, AUTOO CT400 is equipped with a cooling fan and thermal protection, with a power of 60w. Equipped with a cooling fan to continuously cool the machine during use, avoid damage to the machine due to overheating, thereby prolonging the use time of the machine
• Smart Design Come with high-definition digital control panel display, easy to operate and learn. With the help of the bright LED background light, you can clearly observe the various working conditions of the fuel injector. Equipped with a test liquid discharge valve, the content of the test liquid can be clearly observed. It can also be recycled and reused.
• Microcomputer Technology AUTOOL CT400 fuel injector cleaning detector adopts ultrasonic cleaning technology and microcomputer oil pressure closed-loop control cleaning detection technology. It can simulate various working conditions of the engine, clean and test the fuel injectors of various motorcycles, and can also clean the fuel injectors and fuel supply systems of motorcycles without disassembly.
• Three Years Warranty and Lifelong Maintenance For the damage caused by non-human factors, AUTOOL promises to resend the parts for free within 3 years. For any demand, we warmly welcome you to contact us, and we will reply you as soon as possible within 24 hours.
• See more on Amazon...

Features

• Why Need It For example: 1. The rupture of the vacuum hose will cause the mixture to be too thick, the idle speed will increase, the hot car will not start well, the engine will surge during acceleration, the fuel consumption will increase significantly, and the exhaust pipe will emit black smoke. 2. Blocking will cause the idle speed to drift, and the idle speed is easy to stall. 3. Air leakage in the vacuum tube will cause the engine to run weakly
• Wide Testing Range The smoke leak detector can do smoke testing of multiple systems, such as EVAP systems, Intake Systems, Cooling / EGR /Exhaust Systems, Crankcase Systems, Engine Airtightness, Vacuum Leaks, Low Pressure Turbo leaks.Applicable cars, motorcycles, snowmobiles, off-road vehicles, ATVs, light trucks and speedboats boats.
• Built-in Air Pump Customers do not need to purchase additional air pumps, we use high-quality materials, after many tests, please rest assured to use. You can save more time and money
• EVAP Detection American cars that began production in 1996 are equipped with EVAP service ports; in most American cars, the EVAP service port is usually located in the engine compartment, but the EVAP service port of some special models may be located in other locations. Open the plastic cover of the EVAP service port, then use the spool wrench to remove the check valve clockwise, then install the EVAP service port adapter, and introduce smoke from the port into the EVAP leak detection system.
• Stable and efficient Fill the car pipes with smoke, wait for about 2 minutes, and use inspection lights to assist in lighting, and start to check the system leakage fault points, which is very efficient.
• See more on Amazon...

Features

• Spindle Thread Repair Set Axle spindle thread repair tool kit can be used to repair/clean the axle threads on the spindle, effectively clean the rust and dirt on the thread, repair the worn thread,and recover the clear thread line. Thread chaser set is designed to clean or repair spindle thread, axle studs and wheel stud threads.
• Widely Compatible Thread repair tools are suitable for a variety of thread specifications, Sizes included M20 x 1.25, M20 x 1.50, M22 x 1.00, M22 x 1.50, M24 x 1.50, M24 x 2.00, 13/16 Inches x 20 UNF, 3/4 Inches x 20 UNF. Use with 1-1/4 socket or wrench. (package does not contain 1-1/4 socket or wrench. )
• Durable High-Quality Steel Made of high-quality steel, with high strength and durability, rustproof which can provide long-term service. There are vertical grooves that run across the radial threads. These grooves act as channels for expelling gunk and rust removed when cleaning and repairing threads.
• Portable Storage This is a custom-made toolbox is based on the shapes and sizes of all tools to keep them neat and steady. Each nut has a fixed position in the plastic box, all the nuts and plastic box are engraved with product size, easy to select and use and placement. Also the groove in the box protects the hub from being abraded, making it convenient for easy transport, simple storage.
• Three Years Warranty For any quality problems. If Thread Chaser Set has any defect, we will provide new replacement or solutions for our customers until satisfaction without delay, and provides lifetime technical support. For any needs, you are warmly welcomed to contact us and we will get back to you ASAP within 24 hours.
• See more on Amazon...

Features

• Upgraded Fuel Injector Cleaner Kit AUTOOL Fuel Injector Cleaner Kit with High and Low Pressure Cleaning Functions,It can non-disassembly cleaning of the fuel system. The Non-dismantle injector cleaning kit is suitable for cleaning fuel injectors, air intake system and three-way catalytic converter, which can quickly remove carbon deposits. This automotive injector cleaning kit is for gasoline engines only, not for diesel injectors.
• Multi -adapter & Widely application The fuel system cleaner tool is equipped with a wide range of adapters for almost all cars and light trucks in the EU, Asia and the U.S.A. The Fuel Injector Cleaner Kit is of high quality, the main parts and fittings are made of brass, the connecting hose is made of high-quality rubber material, which is tough, corrosion-resistant and non-leakage, and the tubing is suitable for all cleaning fluids.
• Working Pressure Adjustment The non-dismantle cleaner Autool C100 has a special handling one-way valves to seal up gas and durable pressure regulating valves. Adjustable pressure gauge up to 150PSI.The Fuel Injector Cleaner Tool Kit is equipped with a cleaning canister with a capacity of 1,000 ml, made of high-pressure, high-quality stainless steel, resistant to corrosion and abrasion.
• EFI-Electrenic Fuel Injection System There two types of Electronic Fuel Injection System, throttle or electronic injection. one engine with fuel-return pipe, another one engine without fuel-return pipe.Throttle Model: The way of connection is the same as EFI System, just adjust the pressure of the air source 1-5PSI.
• Storage and Note The fuel system cleaner kit is equipped with a heavy blow molded plastic box,which can protect products for easy transportation.Note:This automotive fuel injector cleaning kit is only suitable for gasoline engines, not for diesel fuel injectors and this kit does not contain any cleaning fluid.
• 3 years Warranty For damage caused by non-human factors,AUTOOL promise to resend parts for free within 3 years. For any needs,you are warmly welcomed to contact us and we will get back to you ASAP within 24 hours.
• See more on Amazon...

Features

• Why Need It Battery tester is mainly targeted to analyze the battery healthy status to calculate the actual cold cranking capability of the battery and the aging extent, which provide reliable analysis evidence for the test and maintenance of the battery. It notifies the user to replace battery in advance when the battery getting aged.
• Widely Compatibility As one of the most cost-effective product of AUTOOL, AUTOOL BT360 can test all 12V 100-2000CCA batteries including regular flooded, AGM flat plate, AGM spiral, or gel batteries. Test results based on GB, BCI, CCA, EN, CA, MCA, DIN, SAE, JIS and IEC Standards.
• >99.8% Accuracy Thanks to AUTOOL BT360 powerful and smart chip, it provides more than 99.8% precise testing reports within milliseconds(testing results refer to for US for Midtronics), greatly improved the testing speed compared to other battery testers.
• Professional Data AUTOOL BT360 12V Battery Load Tester gives you the basic battery parameters such as voltage, internal resistance, cold cranking amp and AH capacity, battery health and charge status. Additionally, battery cca tester will also show you professional advice whether to replace or charge the battery.And it can switch up to 8 languages for different needs.
• Wide Application This 12V battery load tester can only be powered on once it is properly attached thanks to a safe passive testing approach. You may test the batteries of a number of vehicles, including cars, motorbikes, trucks, RVs, ATVs, SUVs, boats, yachts, lawnmowers, and even golf carts, without needing to charge the device first.
• Easy to Carry The AUTOOL BT360 is small and compact, making it simple to keep in a glove box or center console. This battery load tester's rapid and precise results will enable you to decide whether your car battery needs to be replaced or jump-started making it an excellent choice for auto shops, garages, and DIY users who frequently check batteries.
• Three Years Warranty and Lifelong Maintenance For the damage caused by non-human factors, AUTOOL promises to resend the parts for free within 3 years. For any demand, we warmly welcome you to contact us, and we will reply you as soon as possible within 24 hours.
• See more on Amazon...

Features

• Why Need It For example: 1. The rupture of the vacuum hose will cause the mixture to be too thick, the idle speed will increase, the hot car will not start well, the engine will surge during acceleration, the fuel consumption will increase significantly, and the exhaust pipe will emit black smoke. 2. Blocking will cause the idle speed to drift, and the idle speed is easy to stall. 3. Air leakage in the vacuum tube will cause the engine to run weakly
• Air Mode & Smoke Mode Built-in air pump and smoke generator, so it does not rely on additional air machine, perfect for Mobile Automotive Repair! The smoke can be produced within 10 seconds, dramatically reducing diagnostic time. Smoke output value: 6L/min.
• EVAP Detection American cars that began production in 1996 are equipped with EVAP service ports; in most American cars, the EVAP service port is usually located in the engine compartment, but the EVAP service port of some special models may be located in other locations. Open the plastic cover of the EVAP service port, then use the spool wrench to remove the check valve clockwise, then install the EVAP service port adapter, and introduce smoke from the port into the EVAP leak detection system.
• External Pressure Gauge You can observe the barometer to more accurately determine whether the car pipeline is leaking. If the barometer index keeps increasing, there is no problem with your car s pipeline. If the barometer index keeps decreasing, your car s pipeline leaks need to be repaired, and there is a barometer test. Leakage is faster and more accurate
• External Flow Meter You can easily control the air pressure, because the air pressure of each pipe in the car is different. If the air pressure is too high, the pipe will be damaged, and if the air pressure is too low, the leak will not be detected. Therefore, the flow meter is very important to protect your detection system more effectively. Make testing safer
• Three Years Warranty and Lifelong Maintenance For the damage caused by non-human factors, AUTOOL promises to resend the parts for free within 3 years. For any demand, we warmly welcome you to tell us, and we will reply you as soon as possible within 24 hours.
• See more on Amazon...

Features

• Easy Instant Read Measures real-time pressure values, maximum and minimum pressure values and differential pressure values of engine oil, as well as measurement time. With 3 different kinds of numerical units in PSI, Bar, and KG/CM , easy to control with buttons. The measurement range is 0-426.6PSI; 0-29.4BAR; 0-30KG/CM .
• Smart Digital Gauge The 2.8-inch backlit display shows clear, accurate data in both bright and dim light. Digital compression gauge has 0.01 display resolution instead of normal 1PSI display resolution compression tester.
• Easy Operation Click the lock screen button to lock the current screen and hold the data. Fuel pressure tester kit with quick release button, long press to zero the unit pressure. The measuring probe of the gauge hose can be quickly connected with most adapters, saving time and improving efficiency.
• Riveted Copper Material Included with plenty of adapters to fit variety of gasoline engines. Adapters constructed from high-quality brass resist rust and corrosion, rugged and long-lasting. Extra long 78.7'' hose adopt reinforced rubber, withstand pressure, temperature, and torsion.
• Three Years Warranty For any quality problems. If PT630 has any defect, we will provide new replacement or solutions for our customers until satisfaction without delay, and provides lifetime technical support. For any needs, you are warmly welcomed to contact us and we will get back to you ASAP within 24 hours.
• See more on Amazon...

Features

• Fully-Automatic & Efficient AUTOOL EM160 forklift battery charger is an advanced fully-automatic smart charger. All that needed for the entire operation is to simply plugin and turn on the power switch, and it will automatically charge. It is faster than the traditional model while the efficiency is twice that of the traditional model.
• Smart Temperature Control & Protection Function The internal parts of chargers for golf carts is adopted temp control tech and comes with cooling fan to provide better performance.The charging current of it can reach 30A, which is not affected by the change of input AC voltage, and the installation of over-voltage, over-current, and over-heat protection circuits to ensure extended service life.
• Current Voltage Meter & Indicator Light This club car charger is equipped with current voltage meter, which can display the current and voltage in real time; In addition, there are three indicators, namely, charging indicator, fully charged indicator and fault indicator, to help you understand the working condition of the charger in real time.
• Lightweight & Portable & Widely Used The club car golf cart charger is 3.1kg only and designed with a portable handle for carrying around. Suitable for 24V, 200AH-300AH lead-acid batteries vehicles, such forklift, golf cart, floor scrubber and etc.
• Three Years Warranty golf cart charger For damage caused by non-human factors, AUTOOL promises to resend parts for free within 3 years. For any needs, you are warmly welcomed to contact us and we will get back to you ASAP within 24 hours.
• See more on Amazon...

Features

• High-precision Monitoring : This product can monitor car data in real time, it fully supports the high-precision monitoring of vehicle speed, vehicle tilt angle, vehicle pitch angle change, compass, time and vehicle battery voltage status to ensure your driving safety.
• In-Built Multi-axis gyroscope & GPS System: This product is multifunctional instrument with in-built multi-axis gyroscope and GPS system, which can measure the slope and inclination, the degree of downhill and uphill of off-road vehicles. Widely applicable to Asian cars, American cars, European cars.
• Full Automatic Control: After the vehicle starts, the speedometer will start automatically. After the vehicle stops, the speedometer will enter the sleep mode automatically. It can be used as long as the power is on, after the power is turned on, there will be backlight inside, which can help you see accurately at night or in the dark situation.
• Widely Application: Equipped with high- precision satellite GPS signal module. Automatically monitor vehicle driving conditions. Widely applicable to Asian cars, American cars, European cars.
• HD LCD Interface Light Sensor: Autool X95 uses high resolution color HD LCD display. Using the sensitivity of the light sensor to adjust the brightness of the screen will greatly improve the visibility. Free rotation, more sensitive.
• See more on Amazon...

Features

• Why Need It Car Smoke Leak Detector is a professional auto pipe leak detect tool. It will help us position cars motorcycles leakage on the pipe systems quickly and exactly
• Air Mode & Smoke Mode Built-in air pump and smoke generator, so it does not rely on additional air machine, perfect for Mobile Automotive Repair! The smoke can be produced within 7-15 seconds, dramatically reducing diagnostic time. Smoke output value: 1-6L/min.
• Flow Meter & Pressure Gauge According to the pressure of the detection pipeline, it is controlled with a flowmeter to more effectively protect the pipeline from damage. By observing the pressure gauge, you can determine whether the pipeline is leaking more quickly and accurately. Usually the pressure gauge continues to rise, indicating that there is no problem with the pipeline. If the pressure gauge continues to decrease, Explain that the pipeline leak needs to be repaired.
• EVAP Detection American cars that began production in 1996 are equipped with EVAP service ports; in most American cars, the EVAP service port is usually located in the engine compartment, but the EVAP service port of some special models may be located in other locations. Open the plastic cover of the EVAP service port, then use the spool wrench to remove the check valve clockwise, then install the EVAP service port adapter, and introduce smoke from the port into the EVAP leak detection system.
• Wide Testing Range Built-in air pump,The smoke leak detector can do smoke testing of multiple systems, such as EVAP systems, Intake Systems, Cooling / EGR /Exhaust Systems, Crankcase Systems, Engine Airtightness, Vacuum Leaks, Low Pressure Turbo leaks.Applicable cars, motorcycles, snowmobiles, off-road vehicles, ATVs, light trucks and speedboats boats.
• Three Years Warranty and Lifelong Maintenance For the damage caused by non-human factors, AUTOOL promises to resend the parts for free within 3 years. For any demand, we warmly welcome you to tell us, and we will reply you as soon as possible within 24 hours.
• See more on Amazon...

Features

• Special Machine For Removing Carbon Deposits HTS558 Walnut Sand DE-Carbon Cleaner is a special machine for cleaning the carbon deposits on the intake pipe and the back of the intake valve of the automobile engine, which can deeply remove the high-viscosity carbon deposits on the intake manifold and intake and exhaust valves. After cleaning, the engine can be kept in a healthy state and ensure the efficient operation of the engine.
• Safe & Efficient The HTS558 Intake Pipe Valve Cleaner Machine uses walnut sand as cleaning agent. A large amount of pores on surface of walnut sand which provide super adsorption capacity, non-toxic and corrosion preventive. As an eco-friendly pure natural polish material, walnut sand has advantages of hardness, pressure resistance and wear resistance. It can clean the intake pipe and backside of the intake valve thoroughly without pipes damage and corrosion.
• Simultaneous Injection And Recovery Walnut blaster special machine for cleaning the back of the engine intake pipe and intake valve. After closing the intake valve, the walnut sand is sprayed into the engine air intake through the air pump (not included), and the HTS558 recovers the walnut sand through vacuum. Because these two operations form a closed loop, walnut powder will affect the carbon deposition on the inner wall of the intake pipe.
• Easy To Operation Turn off the engine before cleaning, then turn the crankshaft to close the intake valve, and use a high-pressure air pump (not included) to inject walnut powder (not included) into the intake port of the engine. The built-in dust filter of Automotive Engine Carbon Deposition Cleaner help to separate and recover walnut sand from carbon deposits, thus forming a complete cleaning closed loop.
• Integrated Design The walnut sand of Walnut Blaster Kit for Carbon Cleaning can be sprayed and recycled simultaneously. Built-in dust filter can separate the recovered walnut sand grit from carbon deposits for recycling. Walnut sand residual in intake pipe will go to ashes at high temperature after engine cranking to avoid damaging automotive exhaust systems & parts.
• Three Years Warranty, Lifetime Maintenance For damage caused by non-human factors, we promises to resend parts for free within 3 years. For any needs, you are warmly welcomed to contact us and we will get back to you ASAP within 24 hours.
• See more on Amazon...

Features

• Upgraded version made of environmentally TPT material shell with excellent flexibility and insulativity performance.
• Adopt interior pure copper wire structure with faster trasnsmission speed and stabler performance.
• Standard OBD2 interface can be used to plug into an OBD-II compliant vehicle and coupled with OBD-II diagnostic hardware smoothly.
• Extremely sturdy and long lasting, which can be used more than 10000times without any hassle
• Our GOGOLO OBD cable series all comes with elegant package, you won't never be disappointed in choosing this
• There are two kinds of design, with logo or not. And you will recieved in random. However, please purchased without worries because they made by the same meterial.
• See more on Amazon...

Features

• Widely Applicable The intelligent electronic refrigerant group instrument is an auxiliary instrument for the installation, testing and maintenance of refrigeration equipment such as air conditioners,fridge and cold storage.
• Multiple Test Modes AUTOOL LM120+ Refrigerant Manifold Gauge can measure dual pressure (high and low pressure), and dual temperature measurement (high and low pressure pipeline temperature, need to connect test clamps), measure the percentage of vacuum degree; it has the functions of pressure leakage measurement, leakage time and speed recording, pressure multi- unit conversion, temperature Celsius / Fahrenheit Conversion, etc., to meet the different needs of users.
• Intelligent Digital Display The AUTOOL LM120+ Refrigerant Manifold Gauge adopts large-size LCD liquid crystal display, which is supported by LCD backlight, and the data display is clear and easy to read. Users can complete the operation through the buttons on the operation panel throughout the process. The display is rich in content, and the operation process and data are clear at a glance, which significantly improves the maintenance efficiency.
• Built-in Database The AUTOOL LM120+ Auto Digital Refrigerant Manifold Gauge has a built-in 32-bit digital processing unit and a high-precision data acquisition unit, with high data stability; At the same time, there are 89 kinds of refrigerant pressure and evaporation temperature databases built-in, which can calculate the supercooling and superheating temperature, and it is convenient to directly read the operation process data.
• Industrial-Grade Design It is equipped with durable valve switch and 1/4 inch standard interface design to ensure the durability and versatility of the gauge.
• Excellent Material AUTOOL LM120+ Auto Digital Refrigerant Manifold Gauge adopts high-strength engineering plastic, flexible non-slip silicone design and ergonomic shell design; copper interface, not easy to slip. The overall unit is strong and sturdy, significantly extending the its service life.
• Three Years Warranty and Lifelong Maintenance For the damage caused by non-human factors, AUTOOL promises to resend the parts for free within 3 years. For any demand, we warmly welcome you to contact us, and we will reply you as soon as possible within 24 hours.
• See more on Amazon...