BENCHMARK FR - Buying Guide

Bestselling from BENCHMARK FR on Amazon

1. Silver Bullet Ultra Lightweight Flame Resistant Long Sleeve Button Up Shirt - Made in The USA (Lt. B...
2. BENCHMARK FR Flame Resistant Face Mask Neck Gaiter - CAT1 (Plain Face Gaiter - Beige)
3. BENCHMARK FR Flame Resistant Stretch Bandanna, USA Made, 6.4 Cal, Lightweight, Soft FRC (Lt. Gray)
4. BENCHMARK FR Flame Resistant Lightweight Balaclava - Made in The USA (Light Gray)
5. BENCHMARK FR Flame Resistant Face Mask Neck Gaiter - CAT2 - Made in the USA (Dia De Los Muertos - Beige)
6. Flame Resistant Soft Fleece Winter Balaclava - Made in USA (Black)
7. BENCHMARK FR Flame Resistant Beanie - CAT3 - Made in The USA (Navy)
8. BENCHMARK FR Flame Resistant Featherweight Contractor Plus Coveralls (Navy - 2XL)
9. Flame Resistant Long Sleeve Raglan Baseball T-Shirt - Made in The USA (Gray/Black, 5XL)
10. BENCHMARK FR Flame Resistant Face Mask, 3 Pack, CAT 2, NFPA 2112 (Black)

Features

• Style and Function - Arc and flame resistant button-up long sleeve collared shirt with two buttoned chest pockets
• Material - Comfortable, lightweight, skin-safe, moisture wicking, and breathable FR 5.1 ounce knit fabric. Rip-stop grid provides superior mechanical strength, drape and flexibility
• Quality - Manufactured in the United States for welders, utility workers, electrical lineman, oilfield and refinery workers by Benchmark FR. Each shirt is individually serialized to maintain the highest standards in manufacturing quality
• Safety - Provides HRC/CAT Level 2 protections with a 9 cal sq/cm rating with NFPA 2112 certification. Meets or exceeds NFPA 70E compliant and ASTM F1506 standards
• Laundry & Care - Machine wash cold or warm temperature using liquid or powder detergent. Tumble dry using low heat. Do not use bleach. Multi-hazard arc and flame-resistant properties will not degrade with wash and wear cycles
• See more on Amazon...

Features

• Style and Function - These Arc and Flame Resistant gaiters were developed for electrical utility linemen who did not want to wear a respirator or balaclava to keep the creosote off their face in the hot Texas summers. Since launching these masks, welders, oil & gas workers, miners, and electricians have all worn and loved these for their year-round comfort and protection
• Material - Our comfortable lightweight 5.2oz FR material is made from a Modacrylic, Cotton, Nylon blend is designed to be breathable, moisture wicking, skin-safe, non-allergenic, and lightweight. The mufflers ribbed mouth allows for easy breathing in all season applications
• Quality - Manufactured in the United States. These arc and flame-resistant face muffler were designed, developed, tested, printed and sewn at the Benchmark FR facility in California
• Safety - HRC/CAT 1, EBT = 6.4 cal/sq-cm. Meets or exceeds ASTM F1506, NESC 2012, OSHA 1910.269, OSHA 1910.960 compliance standards
• Laundry and Care - Machine washable. Do not use bleach or fabric softener
• See more on Amazon...

Features

• JUST LIKE A REGULAR BANDANNA, ONLY BETTER Whether you wear it on your head, over your face or around your neck, you will notice the difference. That is because unlike traditional bandannas, ours our created with a four way stretch. You can tie them around your head without feeling like you are cutting off blood flow. They also wick moisture, so you don t have to worry about wearing a sweaty bandanna all day. Every FR bandanna comes with a hard hat sticker.
• ARC AND FLAME RESISTANT FOR LIFE This 5.2 ounce material is a soft, inherent blend of Modacrylic, Cotton and Nylon. They will remain arc and flame resistant regardless of the number of wash and wear cycles. These neck gaiters, or face masks, are NFPA 70E Compliant, HRC / CAT 1, EBT = 6.4 cal/sq-cm and meet ASTM F1506. Don t add fuel to the fire in the event of an arc flash or flash fire. One Size Fits All.
• SKIN SAFE. TIRED OF ITCHING? - This fabric is safe to wear directly against your skin. The flame-resistant materials used are non-allergenic and will not react with your skin. We voluntarily meet the most stringent international health codes related to formaldehyde, ammonia, arsenic, heavy metals and other toxins. Go ahead and sweat in it.
• MADE IN USA We believe in making high quality products right here in the USA. These arc and flame-resistant stretch bandannas were designed, developed, tested, printed and sewn at our facility in California. BENCHMARK FR manufactures in-house to ensure quality and value. Proudly bearing the Made in the USA label.
• See more on Amazon...

Features

• Function Flame resistant lite balaclava face covering. Designed to be worn over the nose or pulled down below the chin as well as fit comfortably under any hard hat
• Quality - Manufactured by Benchmark FR in Santa Ana, California
• Material Comfortable, breathable, and soft. 97% cotton/3% Spandex FR blend
• Safety - CAT/HRC 2, ATPV= 14 cal/cm2. Face covering meets the requirements of the NFPA 2112-2018. Meets the requirements of performance specification ASTM F1506, OSHA 1910.269
• Laundry and Care - Machine wash warm, tumble dry low. Use soft powder or liquid laundry detergent. do not use; bleach, fabric softeners, starch, lye-based soap, open steam or products containing hydrogen peroxide
• See more on Amazon...

Features

• Style and Function - Arc and flame resistant neck muffler made for jobsite safety and protection from the elements
• Material - Comfortable, skin-safe, breathable, moisture-wicking, lightweight 6.2oz fabric made from a FR cotton blend
• Quality - Manufactured in the United States for welders, miners, utility workers, electrical linemen, oilfield and refinery workers by Benchmark FR
• Safety - Meets requirements of performance standard ASTM F1506, NFPA 70E, OSHA 1910.269. CAT/HRC2 ATPV = 8 cal/cm2
• Laundry & Care - Machine wash with cold or warm temperature water using liquid detergent. Tumble dry using low heat. Do not use bleach or fabric softener
• See more on Amazon...

Features

• Soft & Comfortable FR Fleece: The Benchmark FR Arc and Flame-Resistant Balaclava is made from soft FR fleece, so you stay comfortable and warm when the temperatures drop. You can wear it down below your chin or above your nose and never have to worry about it stretching out.
• Warmth Without Bulk: Unlike some balaclavas, the BENCHMARK FR Winter Balaclava provides warmth without bulk so it can be comfortably worn under any helmet or hard hat. The single layer construction makes it easy to breathe through.
• Flame Resistant for Life: The flame-resistant properties of the BENCHMARK FR Arc and Flame Resistant Winter Balaclava will remain for the life of the product. You can wash it as much as you want and not worry. It can be washed in a regular laundry, just make sure not to use bleach. It is also safe to wear against your skin and safe to breathe through.
• Quality - Manufactured in the United States. These arc and flame-resistant face muffler were designed, developed, tested, printed and sewn at the Benchmark FR facility in California
• Safety - Meets requirements of performance standard ASTM F1506, NFPA 70E, OSHA 1910.269. CAT/HRC2 EBT = 18 cal/cm2
• See more on Amazon...

Features

• Material and Function - Flame-resistant navy beanie. Double layered knit construction provides excellent warmth for your head and ears. Breathable while offering protection from the wind. Seamless, circular knit stretches with excellent recovery. Thin enough to fit comfortable under most hard hats and welding masks
• Quality - Manufactured in Santa Ana, California for welders, linemen, and utility, oilfield and refinery workers by Benchmark FR
• Safety CAT/HRC3. EBT 36cal/cmsq
• Laundry & Care - Machine wash cold or warm temperature using liquid or powder detergent. Tumble dry using low heat. Do not use bleach. Suitable for home or industrial laundry
• See more on Amazon...

Features

• Styling and Function - Arc and flame resistant Coveralls offer multi-hazard protection. The coveralls feature two front pockets, two back pockets, snap cuffs, slight elastic waist, non-sparking front zipper and a lay-flat collar. Stress points are reinforced for increased durability to outlast low quality coveralls
• Material - Comfortable, soft, skin-safe, quick-drying, moisture wicking and breathable 6.6oz 100% FR cotton
• Quality - Manufactured for welders, utility workers, electrical lineman, oilfield and refinery workers by Benchmark FR. Each coverall is serialized and traceable for quality control
• Safety - Multi-hazard arc and flame-resistant properties will not degrade with wash and wear cycles. Provides ARC/CAT Level 2 protections with a 8.6 cal sq/cm rating. Meets requirements of performance specification ASTM F1506, OSHA 1910.269, OSHA 1910.960, NESC 2012, and NFPA 70E
• Laundry & Care - Machine wash cold or warm temperature using soft liquid or powder detergent. Tumble dry using low heat. Do not use bleach, lye based soap, open steam products using hydrogen peroxide
• See more on Amazon...

Features

• Styling and Function - Arc and flame resistant baseball style raglan Long Sleeve tshirt with front pocket
• Material - Comfortable, skin-safe, breathable, moisture-wicking, lightweight 6.2oz fabric made from 100% FR cotton
• Quality - Manufactured in the United States for welders, linemen, utility, oilfield and refinery workers by Benchmark FR. Each shirt is individually serialized to maintain the highest standards in quality control
• Safety - NFPA 2112 70E Arc Ratings: CAT/HRC2 ATPV 8 cal/cmsq. Meets the requirements of NFPA 2113-2018. Meets the requirements of performance specification ASTM F1506, OSHA 1910.269, OSHA 1910.960 and NFPA 70E
• Laundry & Care - Machine wash cold or warm temperature using liquid or powder detergent. Tumble dry using low heat. Do not use bleach. Expect your shirt to shrink about 4% total after the first one or two washes
• See more on Amazon...

Features

• Arc Flash & Flame Resistant For Life - This 6.2 oz material is a soft, flame resistant cotton. They will remain arc and flame retardant regardless of the washes and wear cycles. Our face masks are NFPA 70E Compliant, CAT/HRC 2, ATPV = 8.7 cal/cm2 and meet ASTM F1506. This Cloth Face Covering meets the requirements of NFPA 2112-2018.
• Lightweight & Skin Safe - This FRC fire resistant fabric is safe to wear directly against your skin when at work. The flame-resistant materials used are non-allergenic and will not react with your skin. We voluntarily meet the most stringent international health codes related to formaldehyde, ammonia, arsenic, heavy metals and other toxins. It is pre-shrunk and odorless, so they are ready to wear, right out of the package.
• Engineered For Comfort When we developed our arc and flame-resistant face masks, we did it with comfort in mind. Instead of using multiple layers, we use a single layer that provides protection but is breathable. It has a contoured fit, so it stays securely over your nose and chin. Instead of having an interior polyester tag rubbing your face, we used a non-flammable stamp on the outside. The seams are on the outside so you they don t rub against your nose.
• Ear Loops, Not Ties Instead of using ties that are uncomfortable, loosen and hang down, we create our FR face mask with ear loops so it is easy to put on and take off even if you are wearing a hard hat or welding helmet.
• Made in USA - We believe in making high quality fire retardant rated products right here in the USA. These arc and flame-resistant face masks were designed, developed, tested, printed and sewn at our facility in California. BENCHMARK FR manufactures in-house to ensure quality and value. Proudly bearing the Made in the USA label
• See more on Amazon...