Bullnose Products - Buying Guide
Last Updated: 05/12/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
Bullnose Rudder clamp on boat rudder fits a 1.125" transom trolling motor shaft. Commonly used for, inflatable Pontoon, Pelican Bass Raider 10E, fishing Kayak, Canoe, Jon boat, etc. USA Manufactured
Asin: B01FRLDP26 | Model: 868527000206A | PartNumber: 868527000206A | Ean: 0868527000206, 0744288437614 | UPC: 744288437614, 868527000206
Essential - In Most Cases It Helps Hold A True Course At Both A Slow And High Trolling Speeds. Customers Have Also Said, “It Prevents The Boat From Spinning As Much When The Motor Is Off”. Most Tiny Boats Will Benefit From Having Some Kind Of A Rudder Set Up In The Back Vs Not Having A Rudder At All. Only Takes A Few Minutes To Install And You Are Ready To Go..
Bow Mount - Fits The Minn Kota, Edge, Maxxum, And Fortrex. The Bow Mount Motor Must Be A Hand Cable Pull, Not Self Deploy. Self Deploy Will Not Work Because The System Requires The Shaft To Slide Up And Down Right Where The Rudder Needs To Be Attached. However, A Hand Cable Pull Will Allow You To Carefully Bring The Motor Up Out Of The Water On The Motor Mount. Your Bow Mount Setup Needs To Have 1' Of Shaft Sticking Out From The End Of The Platform Allowing Enough Space To Attach The Rudder..
Quality - Manufactured In The Usa With High Quality Parts & Material To Help Ensure You Have A Stress-Free Fishing Experience. It Is Manufactured From Impact Plastic For Durability And Comes With Stainless Steel Screws. It Is Built Strong So You Don't Have To Worry About It Coming Loose, Allowing You To Focus More On Fishing. Patent No. D712,341S.
Fit - The Bullnose Rudder Is A Boat Rudder That Fits 1 1/8" (1.125") Transom Mount Trolling Motors. Please Note, It Will Not Work On A Self Deploy Bow Mount Trolling Motor. It Measures 10.5" High X 4.75" Wide And Fits A 1 1/8" Shaft Diameter. It's Most Commonly Used For "But Not Limited To" Minn Kota Trolling Motor, Motorguide Trolling Motors, Newport Vessel Trolling Motor, Etc. Common Tiny Boats Used Are, Inflatable Pontoon, Pelican Bass Raider 10E, Fishing Kayak, Canoes, Jon Boats, And More..
Features
- PERFECT SOLUTION - Trolling motors are known for lack of steering especially when the wind picks up, the water is choppy or you want to track in a straight line. Simply add a Bullnose Rudder which is designed to give you better control of your watercraft in most windy conditions, help hold a true course at most trolling speeds, and prevent the boat from spinning as much when the motor is off. Patent no. D712,341S
- FIT - The Bullnose Rudder is a boat rudder that fits 1 1/8 (1.125) transom mount trolling motors. Please note, it will NOT work on a self deploy bow mount trolling motor. It measures 10.5 high x 4.75 wide and fits a 1 1/8 shaft diameter. It's most commonly used for but not limited to minn kota trolling motor, motorguide trolling motors, newport vessel trolling motor, etc. Common tiny boats used are, inflatable pontoon, Pelican Bass Raider 10E, fishing kayak, canoes, jon boats, and more.
- ESSENTIAL - In most cases it helps hold a true course at both a slow and high trolling speeds. Customers have also said, it prevents the boat from spinning as much when the motor is off . Most tiny boats will benefit from having some kind of a rudder set up in the back vs not having a rudder at all. Only takes a few minutes to install and you are ready to go.
- QUALITY - Manufactured in the USA with high quality parts & material to help ensure you have a stress-free fishing experience. It is manufactured from impact plastic for durability and comes with stainless steel screws. It is built strong so you don't have to worry about it coming loose, allowing you to focus more on fishing. Patent no. D712,341S
- BOW MOUNT - Fits the Minn Kota, EDGE, MAXXUM, and FORTREX. The bow mount motor must be a hand cable pull, NOT self deploy. Self deploy will not work because the system requires the shaft to slide up and down right where the rudder needs to be attached. However, a hand cable pull will allow you to carefully bring the motor up out of the water on the motor mount. Your bow mount setup needs to have 1' of shaft sticking out from the end of the platform allowing enough space to attach the rudder.
- See more on Amazon...
Brand: Bullnose Products | Manufacturer: Bullnose Products LLC
Dimensions: 1.50 x 10.50 x 6.75 inches | Weight: 0.54 Pounds
See On Amazon #2
Ice Fishing Tip Down-Tip Up REPLACEMENT CLIPS Ice Rod Clips Compatible with BIG RED and ORIGINAL BLUE Tip Down-Tip Up. Sensitive to The Slightest Fish Bites- Fits a Standard 3/4" Ice Rod Handle
Asin: B08142GNZR
Fit – Designed To Fit Big Red And Original Blue Tip Down-Tip Up. The Plastic Clip Is Custom Made To Fit A Standard ¾” Ice Fishing Rod Handle And Measures 4 7/8” Length X 1.5” High..
Install –Listing Includes (2) Tip Down-Tip Up Replacement Clips. Fishing Rod And Tip Down-Tip Up Frames Are Not Included. Simply Slide The Clip Into Place, As Instructed Onto Your Rod Then Place It On The Metal Frame To Create A Balancing Effect..
Essential – A “Must” For The Avid Ice Fisherman. If You Plan On Using Multiple Fishing Rods, Additional Rod Holder Replacement Clips Are Recommended To Avoid Having To Remove The Clip Every Time You Switch Rods. It Is Also Nice To Have Extra Clips On Hand In Case One Falls Down The Fishing Hole!.
Quality - This Item Is A Newly Manufactured Product On The Market To Ensure You Have A Stress-Free Fishing Experience. Made Of Durable Plastic Material That Is Heavy Duty. Please Note Plastic Clip Can Snap If Put Under Too Much Pressure..
Features
- PERFECT SOLUTION Having extra Tip Down-Tip Up REPLACEMENT CLIPS allows you to set up multiple rods at a time. It is essential that you know when the fish is starting to show interest in your bait. The rocking motion is extremely sensitive to even the slightest fish bites.
- QUALITY - This item is a newly manufactured product on the market to ensure you have a stress-free fishing experience. Made of durable plastic material that is heavy duty. Please note plastic clip can snap if put under too much pressure.
- FIT Designed to fit BIG RED and ORIGINAL BLUE Tip Down-Tip Up. The plastic clip is custom made to fit a standard ice fishing rod handle and measures 4 7/8 length x 1.5 high.
- ESSENTIAL A must for the avid ice fisherman. If you plan on using multiple fishing rods, additional rod holder REPLACEMENT CLIPS are recommended to avoid having to remove the clip every time you switch rods. It is also nice to have extra clips on hand in case one falls down the fishing hole!
- INSTALL Listing includes (2) Tip Down-Tip Up REPLACEMENT CLIPS. Fishing rod and Tip Down-Tip Up frames are NOT included. Simply slide the clip into place, as instructed onto your rod then place it on the metal frame to create a balancing effect.
- See more on Amazon...
Brand: Bullnose Products | Manufacturer: Bullnose Products
See On Amazon #3
Bullnose Products Original Blue Ice Fishing Tip Down-Tip Up- Sensitive to The Slightest Fish Bites- Fits Most Spinning Reels and Some Smaller Straight-Line Reels.
Asin: B07L9MB3QP | Ean: 0868527000299 | UPC: 868527000299
Fit – Original Blue Tip Down-Tip Up Is A Smaller Version Of Big Red Designed For Most Spinning Reels And Some Smaller Straight- Line Reels. The Plastic Clip Is Custom Made To Fit A Standard ¾” Rod Handle. Frame Measures 9” Length X 4.5” Wide X 8” High.
Install –Listing Includes (1) Original Blue Frame, (1) Rod Clip. Fishing Rod Not Included. Frame Collapses Down For Convenience Of Transporting And Traveling Between Your Fishing Destinations. When Ready To Use, Simply Unfold The Frame And Secure The Clip On The Rod Handle. Place Rod With Clip On The Frame And You Are Set To Go..
Essential - A “Must” For The Avid Ice Fisherman That Is Tired Of Holding Their Fishing Rod By Hand And Trying To Guess When The Fish Is About To Bite. Depending On Your Location, You May Be Allowed To Have Multiple Fishing Holes Per License. By Purchasing Multiple Original Blues’S Makes It Convenient To Set Up One Per Hole While You Sit Back And Wait For The Slightest Movement Of A Fish Bite..
Quality - This Item Is A Newly Manufactured Product On The Market To Ensure You Have A Stress-Free Fishing Experience. Made Of Durable Steel Metal That Is Heavy Duty To Withstand The Most Common Ice Fishing Conditions..
Features
- PERFECT SOLUTION It is essential that you know when the fish is starting to show interest in your bait. The rocking motion is extremely sensitive to even the slightest fish bites. Simply slide the clip into place as instructed onto your rod then place it on the metal frame to create a balancing effect.
- QUALITY - This item is a newly manufactured product on the market to ensure you have a stress-free fishing experience. Made of durable steel metal that is heavy duty to withstand the most common ice fishing conditions.
- FIT ORIGINAL BLUE Tip Down-Tip Up is a SMALLER version of Big Red designed for most spinning reels and some smaller straight- line reels. The plastic clip is custom made to fit a standard rod handle. Frame measures 9 length x 4.5 wide x 8 high
- ESSENTIAL - A must for the avid ice fisherman that is tired of holding their fishing rod by hand and trying to guess when the fish is about to bite. Depending on your location, you may be allowed to have multiple fishing holes per license. By purchasing multiple ORIGINAL BLUES s makes it convenient to set up one per hole while you sit back and wait for the slightest movement of a fish bite.
- INSTALL Listing includes (1) ORIGINAL BLUE frame, (1) rod clip. Fishing rod NOT included. Frame collapses down for convenience of transporting and traveling between your fishing destinations. When ready to use, simply unfold the frame and secure the clip on the rod handle. Place rod with clip on the frame and you are set to go.
- See more on Amazon...
Brand: Bullnose Products | Manufacturer: Bullnose Products
See On Amazon #4
Big RED Ice Fishing Tip Down-Tip Up- Sensitive to The Slightest Fish Bites- Used for Both Larger Reels and Heavier Line as Well as Smaller Reels and Lighter Line.
Asin: B07L6N6PKS | Ean: 0869669000017, 0868527000282 | UPC: 868527000282, 869669000017
Fit – Big Red Tip Down-Tip Up Is A Taller Version Designed For Both Larger Reels And Heavier Line As Well As All Smaller Reels And Lighter Line. Big Red Fits Most Spinning Reels And Straight-Line Reels. The Plastic Clip Is Custom Made To Fit A Standard ¾” Rod Handle. Open Frame Measures 12” Length X 4.5” Wide X 10.5” High.
Install –Listing Includes (1) Big Red Frame, (1) Rod Clip. Fishing Rod Not Included. Frame Collapses Down For Convenience Of Transporting And Traveling Between Your Fishing Destinations. When Ready To Use, Simply Unfold The Frame And Secure The Clip On The Rod Handle. Place Rod With Clip On The Frame And You Are Set To Go..
Essential - A “Must” For The Avid Ice Fisherman That Is Tired Of Holding Their Fishing Rod By Hand And Trying To Guess When The Fish Is About To Bite. Depending On Your Location, You May Be Allowed To Have Multiple Fishing Holes Per License. By Purchasing Multiple Big Red’S Makes It Convenient To Set Up One Per Hole While You Sit Back And Wait For The Slightest Movement Of A Fish Bite..
Quality - This Item Is A Newly Manufactured Product On The Market To Ensure You Have A Stress-Free Fishing Experience. Made Of Durable Steel Metal That Is Heavy Duty To Withstand The Most Common Ice Fishing Conditions..
Features
- PERFECT SOLUTION It is essential that you know when the fish is starting to show interest in your bait. The rocking motion is extremely sensitive to even the slightest fish bites. Simply slide the clip into place as instructed onto your rod then place it on the metal frame to create a balancing effect.
- QUALITY - This item is a newly manufactured product on the market to ensure you have a stress-free fishing experience. Made of durable steel metal that is heavy duty to withstand the most common ice fishing conditions.
- FIT BIG RED Tip Down-Tip Up is a taller version designed for both larger reels and heavier line as well as all smaller reels and lighter line. BIG RED fits most spinning reels and straight-line reels. The plastic clip is custom made to fit a standard rod handle. Open frame measures 12 length x 4.5 wide x 10.5 high
- ESSENTIAL - A must for the avid ice fisherman that is tired of holding their fishing rod by hand and trying to guess when the fish is about to bite. Depending on your location, you may be allowed to have multiple fishing holes per license. By purchasing multiple BIG RED s makes it convenient to set up one per hole while you sit back and wait for the slightest movement of a fish bite.
- INSTALL Listing includes (1) BIG RED frame, (1) rod clip. Fishing rod NOT included. Frame collapses down for convenience of transporting and traveling between your fishing destinations. When ready to use, simply unfold the frame and secure the clip on the rod handle. Place rod with clip on the frame and you are set to go.
- See more on Amazon...
Brand: Bullnose Products | Manufacturer: Bullnose Products
See On Amazon