Chairpartsonline - Buying Guide
Last Updated: 04/24/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
Replacement Hardware Repair Kit for Office Chair Gas Lift Cylinder - Includes Clip, washers, & Bearing - S4451-K
Asin: B00CEZ1EOK | Model: S4451-K | PartNumber: S4451-K | Ean: 0735201994666 | UPC: 735201994666
Attachment Hardware For Lower Area Of Office Chair Gas Lift Pneumatic Cylinder.
Note: Gas Lift Piston In Picture Is For Visual Purposes Only And Is Not Included. Only The Hardware Kit Is Included..
These Parts Fit The Large Majority Of Standard Gas Lift Cylinders In Office Chairs - Most But Not All.
Contains: 1 Rubber Bumper, 1 Silver Washer, 2 Black Washers, 1 White Bearing Pack, 1 Retaining Clip.
Features
- Hardware repair kit for office chair gas lift cylinders
- Contains: 1 Rubber Bumper, 1 Silver Washer, 2 Black Washers, 1 White Bearing Pack, 1 Retaining Clip
- Attachment hardware for lower area of office chair gas lift pneumatic cylinder
- These parts fit the large majority of standard gas lift cylinders in office chairs - Most but not all
- Note: Gas lift piston in picture is for visual purposes only and is not included. Only the hardware kit is included.
- See more on Amazon...
Brand: chairpartsonline | Manufacturer: chairpartsonline
Dimensions: 0.00 x 4.00 x 7.00 inches | Weight: 0.04 pounds
See On Amazon #2
Heavy Duty Replacement Office Chair Swivel Tilt Control Seat Mechanism w/ 6" x 10.2" Mounting Holes - S2979-HD Black
Asin: B072YFNQSR | Model: S2979-HD | PartNumber: S2979-HD | Ean: 0735201995830 | UPC: 735201995830
Single Lever For Gas Cylinder Height Activation - Accepts Standard Tapered Gas Lift Cylinders.
Twist Hand Wheel To Tighten Or Loosen (Adjust) Backward Tilt Tension.
Tilt Control - Push Lever In To Lock Tilt, Pull Out To Unlock.
Heavy Duty - Rated Up To 500 Lbs..
Features
- Heavy duty replacement office chair tilt mechanism with 10.2" long x 6" wide screw mounting hole pattern
- Heavy duty - rated up to 500 lbs.
- Single lever for gas cylinder height activation - Accepts standard tapered gas lift cylinders
- Tilt control - push lever in to lock tilt, pull out to unlock
- Twist hand wheel to tighten or loosen (adjust) backward tilt tension
- See more on Amazon...
Brand: chairpartsonline | Manufacturer: chairpartsonline
Weight: 8.14 Pounds
See On Amazon #3
chairpartsonline 20" Chrome Foot Rest Ring for Drafting Stool or Office Chair - S4165-3
Asin: B00CEJR3IC | Model: S4165-3 | PartNumber: S4165-3 | Ean: 4165306172014
2" (50Mm) Center Hub Hole Width - Fits Most Standard 2" Wide Gas Lift Cylinders.
Tighten Triangular Hand Wheel To Tighten & Adjust Height On Gas Lift Cylinder.
Black Painted Aluminum Center Spokes.
Features
- 20" wide chrome plated steel ring
- Black painted aluminum center spokes
- 2 (50mm) center hub hole width - Fits most standard 2 wide gas lift cylinders
- Tighten triangular hand wheel to tighten & adjust height on gas lift cylinder
- See more on Amazon...
Brand: chairpartsonline | Manufacturer: chairpartsonline
Dimensions: 3.50 x 20.00 x 20.00 Inches
See On Amazon #4
Heavy Duty 5" Stroke Replacement Office Chair Gas Lift Cylinder Pneumatic Shock - S6111-HD Black
Asin: B00CKRBJTW | Model: S6111-HD | PartNumber: S6111-HD | Ean: 0605201461119 | UPC: 605201461119
16.33" (415Mm) Total Overall Extended Length (From Top To Bottom).
Heavy Duty Replacement For Gas Lift Cylinders On Many Office Chairs And Executive Chairs, Including Many Purchased At Office Supply Stores.
Built To Withstand More Weight And Pressure Than Standard Gas Cylinders..
5" Piston Stroke Travel (Up & Down).
Features
- 2" (50mm) wide x 9.25" (235mm) tall center support column (larger diameter black tube) that will fit most chair bases
- 5 piston stroke travel (up & down)
- 16.33 (415mm) total overall extended length (from top to bottom)
- Built to withstand more weight and pressure than standard gas cylinders.
- Heavy Duty replacement for gas lift cylinders on many office chairs and executive chairs, including many purchased at office supply stores
- See more on Amazon...
Brand: chairpartsonline | Manufacturer: chairpartsonline
Dimensions: 11.00 x 2.00 x 2.00 Inches | Weight: 2.51 pounds
See On Amazon #5
Replacement Office Chair Tilt Control Mechanism,Alloy Steel- S2979
Asin: B00CEY7B8O | Model: S2979 | PartNumber: S2979 | Ean: 0735201994888 | UPC: 735201994888
Tilt Control - Push Lever In To Lock Tilt, Pull Out To Unlock.
Black.
Twist Hand Wheel To Tighten Or Loosen (Adjust) Backward Tilt Tension.
Single Lever For Gas Cylinder Height Activation, Accepts Standard Tapered Gas Lift Cylinders.
Features
- Replacement office chair tilt mechanism with 10.2" long x 6" wide screw mounting hole pattern
- Single lever for gas cylinder height activation, accepts standard tapered gas lift cylinders
- Tilt control - push lever in to lock tilt, pull out to unlock
- Twist hand wheel to tighten or loosen (adjust) backward tilt tension
- Black
- See more on Amazon...
Brand: chairpartsonline | Manufacturer: chairpartsonline
Dimensions: 5.00 x 16.00 x 16.00 Inches | Weight: 4.20 pounds
See On Amazon #6
chairpartsonline 2" Antique Brass Ball Caster Wheel for Office, Executive, & Gaming Chairs w/ 7/16" x 7/8" Grip Ring Mounting Stem - Set of 5 - S5352
Asin: B011S65P86 | Model: S5352 | PartNumber: S5352 | Ean: 0735201994550 | UPC: 735201994550
Popular 7/16"X7/8" (11Mm X 22Mm) Grip Ring Mounting Stem - Confirm Measurement Before Ordering..
Set Of 5 Casters.
Heavy Duty 90 Lb. Weight Capacity Per Caster.
Antique Brushed Brass Metal Hood For A More Refined Look.
Features
- 2" (50mm) round PVC ball wheel design - Hard PVC wheel is ideal for use on carpet and plastic chair mats
- Antique brushed brass metal hood for a more refined look
- Popular 7/16x7/8 (11mm x 22mm) grip ring mounting stem - confirm measurement before ordering.
- Heavy duty 90 lb. weight capacity per caster
- Set of 5 casters
- See more on Amazon...
Brand: chairpartsonline | Manufacturer: chairpartsonline
Dimensions: 1.80 x 11.00 x 2.80 Inches | Weight: 1.90 Pounds
See On Amazon #7
2" Antique Brushed Brass Hooded Replacement Office Chair Caster Wheels - Set of 5 - S5306
Asin: B00DEHL4A6 | Model: S5306 | PartNumber: S5306 | Ean: 0735201994567 | UPC: 735201994567
Antique Brushed Brass Hood For A More Refined Look.
Popular 7/16"X7/8" (11Mm X 22Mm) Brass Grip Ring Mounting Stem.
Black Wheels.
Hard Nylon Wheels - Ideal For Use On Carpet And Plastic Chair Mats.
Features
- 2" (50mm) wide double wheel design
- Hard nylon wheels - Ideal for use on carpet and plastic chair mats
- Antique brushed brass hood for a more refined look
- Black wheels
- Popular 7/16x7/8 (11mm x 22mm) brass grip ring mounting stem
- See more on Amazon...
Brand: chairpartsonline | Manufacturer: chairpartsonline
Dimensions: 3.00 x 10.00 x 2.00 inches | Weight: 1.00 Pounds
See On Amazon #8
Heavy Duty Drafting Stool Gas Lift Cylinder Pneumatic Shock - Full Stool Height Replacement - S6120-HD
Asin: B0181FUCF8 | Model: S6120-HD | PartNumber: S6120-HD | Ean: 0735201994710, 0735201994727 | UPC: 735201994710, 735201994727
10" (270Mm) Piston Stroke With 28" (708Mm) Total Overall Extended Length.
Ideal To Replace Gas Cylinders On Most Tall Task Chairs, Drafting Chairs, And Stools, Including Those Purchased At Office Supply Stores..
14.5" (315Mm) Black Support Stand Pipe Column Height (Larger Size Black Tube).
2" Wide Column Diameter Will Fit Most Chair Bases.
Features
- Heavy Duty - Built to withstand more weight and pressure than standard gas cylinders.
- 2 wide column diameter will fit most chair bases
- 10 (270mm) piston stroke with 28 (708mm) total overall extended length
- 14.5 (315mm) black support stand pipe column height (larger size black tube)
- Ideal to replace gas cylinders on most tall task chairs, drafting chairs, and stools, including those purchased at office supply stores.
- See more on Amazon...
Brand: chairpartsonline | Manufacturer: chairpartsonline
Dimensions: 15.00 x 2.00 x 2.00 Inches | Weight: 6.50 Pounds
See On Amazon #9
Replacement Short Office Executive Chair Gas Lift Cylinder Pneumatic Shock - Short Size - 3" Travel/Adjustment Range - S6103
Asin: B00CKR0PJM | Model: S6103 | PartNumber: S6103 | Ean: 0735201994703 | UPC: 735201994703
3" Of Piston Travel / Stroke (Up & Down).
Ideal To Replace Shorter Gas Cylinders On Most Office Chairs And Executive Chairs, Including Those Purchased At Office Supply Stores.
12" (307Mm) Total Overall Length When Fully Extended.
7.25" Wide Black Lower Support Column (Larger Diameter Black Tube).
Features
- 2" wide - will fit most chair bases
- 7.25 wide black lower support column (larger diameter black tube)
- 3 of piston travel / stroke (up & down)
- 12 (307mm) total overall length when fully extended
- Ideal to replace shorter gas cylinders on most office chairs and executive chairs, including those purchased at office supply stores
- See more on Amazon...
Brand: chairpartsonline | Manufacturer: chairpartsonline
Dimensions: 9.00 x 2.00 x 2.00 Inches | Weight: 1.65 pounds
See On Amazon #10
chairpartsonline 2" Antique Brass Ball Caster Wheel for Office, Executive, Gaming Chairs & Furniture w/ 5/16" x 1 1/2" (8 x 38mm) Socket Type Mounting Stem - Set of 5 - S5357
Asin: B01F7JW9IO | Model: S5357-5 | PartNumber: S5357-5 | Ean: 0735201995502 | UPC: 735201995502
Grip Neck Mounting Socket Stem For Metal Or Plastic Insert Measures 5/16" X 1 1/2" (8 X 38Mm) - Mounting Insert Sockets Not Included.
Set Of 5 Casters.
Heavy Duty 90 Lb. Weight Capacity Per Caster.
Antique Brushed Brass Metal Hood For A More Refined Look.
Features
- 2" (50mm) round PVC ball wheel design - Hard PVC wheel is ideal for use on carpet and plastic chair mats
- Antique brushed brass metal hood for a more refined look
- Grip neck mounting socket stem for metal or plastic insert measures 5/16 x 1 1/2 (8 x 38mm) - Mounting insert sockets not included
- Heavy duty 90 lb. weight capacity per caster
- Set of 5 casters
- See more on Amazon...
Brand: chairpartsonline | Manufacturer: chairpartsonline
Dimensions: 0.80 x 12.00 x 2.70 Inches | Weight: 1.80 Pounds
See On Amazon #11
18" Chrome Foot Rest Ring for Drafting Stool or Office Chair - S4167-3
Asin: B00CEJPY3S | Model: S4167-3 | PartNumber: S4167-3 | Ean: 0735201994918 | UPC: 735201994918
2" (50Mm) Center Hub Hole Width - Fits Most Standard 2" Wide Gas Lift Cylinders.
Tighten Triangular Hand Wheel To Tighten & Adjust Height On Gas Lift Cylinder.
Black Painted Aluminum Center Spokes.
Features
- 18" wide chrome plated steel ring
- Black painted aluminum center spokes
- 2 (50mm) center hub hole width - Fits most standard 2 wide gas lift cylinders
- Tighten triangular hand wheel to tighten & adjust height on gas lift cylinder
- See more on Amazon...
Brand: chairpartsonline
Dimensions: 4.00 x 18.00 x 18.00 Inches
See On Amazon #12
2" Replacement Office Task Chair Caster Wheels w/ 7/16" x 7/8" Grip Ring mounting stem- Set of 5 - S2227-5
Asin: B00CDT7B3U | Model: S2227-5/Bag | PartNumber: S2227-5/Bag | Ean: 0735201994628 | UPC: 735201994628
Hard Nylon Plastic Wheels - Ideal For Use On Carpet And Plastic Chair Mats.
Set Of 5 Casters.
Black.
Standard 7/16"X7/8" (11Mm X 22Mm) Wire Grip Ring Stem (Universal) Fits Most Standard Chair Bases.
Features
- 2" (50mm) hooded wheels
- Standard 7/16x7/8 (11mm x 22mm) wire grip ring stem (universal) fits most standard chair bases
- Hard nylon plastic wheels - Ideal for use on carpet and plastic chair mats
- Black
- Set of 5 Casters
- See more on Amazon...
Brand: chairpartsonline | Manufacturer: chairpartsonline
Dimensions: 3.00 x 10.00 x 2.00 inches
See On Amazon #13
2" Chrome Standard Replacement Office Chair Caster Wheels - Set of 5 - S3939-5
Asin: B00CDTTVYW | Model: S3939-5 | PartNumber: S3939-5 | Ean: 0735201994680 | UPC: 735201994680
Hard Nylon Wheel - Ideal For Use On Carpet And Plastic Chair Mats.
Black With Chrome Hood.
Standard 7/16"X7/8" (11Mm X 22Mm) Wire Grip Ring Stem (Universal).
Features
- 2" (50mm) Wheel Diameter
- Standard 7/16x7/8 (11mm x 22mm) wire grip ring stem (universal)
- Hard nylon wheel - Ideal for use on carpet and plastic chair mats
- Black with Chrome hood
- See more on Amazon...
Brand: chairpartsonline | Manufacturer: chairpartsonline
Dimensions: 3.00 x 10.00 x 2.00 Inches | Weight: 1.00 Pounds
See On Amazon #14
2" Replacement Office Chair Caster Wheels - (Set of 5) - S3253
Asin: B00CUEDX9Y | Model: S3253 | PartNumber: S3253 | Ean: 0735201994604 | UPC: 735201994604
Standard Hard Nylon Plastic Wheels - Ideal For Use On Carpet And Plastic Chair Mats.
Black.
Looks Great With Many Black Plastic, Steel, Or Aluminum Chair Bases.
Fits Into Most Standard Chair Bases With Its Standard 7/16" X 7/8" (11Mm X 22Mm) Wire Grip Ring Mounting Stem.
Features
- Set of 5 standard 2" replacement office chair casters
- Fits into most standard chair bases with its standard 7/16 x 7/8 (11mm x 22mm) wire grip ring mounting stem
- Standard hard nylon plastic wheels - Ideal for use on carpet and plastic chair mats
- Looks great with many black plastic, steel, or aluminum chair bases
- Black
- See more on Amazon...
Brand: chairpartsonline
Dimensions: 3.00 x 10.00 x 2.00 inches | Weight: 1.00 Pounds
See On Amazon #15
Replacement Office Chair or Stool Bell Glides - High Profile (5 Pack) - S0007
Asin: B00CF0265A | Model: S0007 | PartNumber: S0007 | Ean: 7174117337236
Uses The Same Mounting Stem To Attach To Chair Bases As Most Chair Casters.
Black.
Standard 7/16" X 7/8" (11Mm X 22Mm) Grip Ring Mounting Stem To Attach To Most Standard Chair Or Stool Bases - Please Measure Yours Before Ordering.
2" Bottom Width X 1.30" Top Width X 2" Overall Glide Height - Similar To Most Chair Casters.
Features
- 2.5" Overall glide height when installed - similar height to most standard chair casters
- 2 Bottom Width x 1.30 Top Width x 2 Overall glide height - similar to most chair casters
- Uses the same mounting stem to attach to chair bases as most chair casters
- Standard 7/16 x 7/8 (11mm x 22mm) grip ring mounting stem to attach to most standard chair or stool bases - Please measure yours before ordering
- Black
- See more on Amazon...
Brand: chairpartsonline | Manufacturer: chairpartsonline
Dimensions: 4.00 x 10.00 x 2.00 Inches
See On Amazon #16
Replacement Office Chair Gas Lift Cylinder Pneumatic Shock - 4.25" Travel - S6222
Asin: B00JQQYNU2 | Model: S6165 | PartNumber: S6165 | Ean: 0616502102014, 0735201995915 | UPC: 616502102014, 735201995915
15.4" (392Mm) Total Extended Length.
Black.
Ideal To Replace Gas Cylinders On Most Standard Office Chairs, Task Chairs, Executive Chairs, And More..
4.5" Piston Stroke Travel (Up & Down).
Features
- 2" (50mm) wide x 8.5" (215mm) tall main support tube that will fit most chair bases
- 4.5 piston stroke travel (up & down)
- 15.4 (392mm) total extended length
- Ideal to replace gas cylinders on most standard office chairs, task chairs, executive chairs, and more.
- Black
- See more on Amazon...
Brand: chairpartsonline | Manufacturer: chairpartsonline
Dimensions: 11.00 x 2.00 x 2.00 Inches
See On Amazon #17
Replacement Armrest Arm Pads for Salon, Beauty, Stylist/Side Chairs - (Set of 2 Arm Pads) S3658
Asin: B00K22GTIS | Model: S3658 | PartNumber: S3658 | Ean: 0082745981202 | UPC: 082745981202
Mounting Screw Holes That Are 4.375" Apart And Are 1/4-20 Threaded (Mounting Hardware Not Included).
Left Or Right Side (Both Are The Same) - Sold As A Pair - Set Of 2.
Fits Onto Chairs With 1" Round Tube Frame Arms.
2.25" Wide X 10.75" Long.
Features
- Armrest Pads for Salon, Beauty, Stylist & Side Chairs
- 2.25 Wide x 10.75 Long
- Mounting screw holes that are 4.375 apart and are 1/4-20 threaded (mounting hardware not included)
- Fits onto chairs with 1 round tube frame arms
- Left or Right side (both are the same) - Sold as a PAIR - Set of 2
- See more on Amazon...
Brand: chairpartsonline | Manufacturer: chairpartsonline
Dimensions: 1.00 x 10.80 x 4.30 Inches | Weight: 1.00 Pounds
See On Amazon #18
28" Replacement Plastic Office Chair or Stool Base w/Casters - Made in USA
Asin: B00CONTZQQ | Model: S4121, S3253 | PartNumber: S4121, S3253 | Ean: 0735201995618 | UPC: 735201995618
- Standard 2" (50Mm) Nylon Plastic Casters.
- Black.
- Base Is Made In The Usa.
- Standard 2" (50Mm) Center Hole Accepts Standard Gas Lift.
Features
- - 28" Replacement Plastic Office Chair Base
- - Standard 2 (50mm) center hole accepts standard gas lift
- - Standard 2 (50mm) Nylon Plastic Casters
- - Base is Made in the USA
- - Black
- See more on Amazon...
Brand: chairpartsonline | Manufacturer: chairpartsonline
Dimensions: 4.00 x 27.00 x 26.00 Inches
See On Amazon #19
Replacement Glide - Low Profile Short Glides for Chairs, Stools, or Tables - Set of 5 - S4342-5
Asin: B00CF06M1O | Model: S4342-5 | PartNumber: S4342-5 | Ean: 0735201994673 | UPC: 735201994673
Standard 7/16" X 1" (11Mm X 25Mm) Wire Grip Ring System To Mount Into Most Chair Or Stool Bases.
White Nylon Plastic Bottom.
Also Mounts To Many Table Bases That Use 7/16" X 1" Grip Ring Mounting Stems.
5/8" (15Mm) Glide Height (Not Including Mounting Stem).
Features
- 1.67 Wide Overall Diameter
- 5/8 (15mm) glide height (not including mounting stem)
- Standard 7/16 x 1 (11mm x 25mm) wire grip ring system to mount into most chair or stool bases
- Also mounts to many table bases that use 7/16 x 1 grip ring mounting stems
- White nylon plastic bottom
- See more on Amazon...
Brand: chairpartsonline | Manufacturer: chairpartsonline
Dimensions: 2.00 x 2.00 x 2.00 Inches
See On Amazon #20
3" (75mm) Extra Large Replacement Office Chair Caster Rollers - Standard Wheel (Set of 5) - S5110
Asin: B00CEI52QI | Model: S5110 | PartNumber: S5110 | Ean: 7544580340062, 0735201994574 | UPC: 735201994574
Hard Nylon Wheel - Ideal For Use On Carpeted Surfaces, Plastic Chair Mats, Etc..
Black.
Casters With Larger Wheels Are More Heavy Duty Than Standard Smaller Chair Casters.
Standard 7/16"X7/8" (11Mm X 22Mm) Grip Ring Mounting Stems Work In Most Standard Chair Bases.
Features
- Double / twin wheel design with 3" (75mm) wheels
- Standard 7/16x7/8 (11mm x 22mm) grip ring mounting stems work in most standard chair bases
- Hard nylon wheel - Ideal for use on carpeted surfaces, plastic chair mats, etc.
- Casters with larger wheels are more heavy duty than standard smaller chair casters
- Black
- See more on Amazon...
Brand: chairpartsonline | Manufacturer: chairpartsonline
Dimensions: 4.00 x 12.00 x 4.00 Inches
See On Amazon #21
Replacement Office Chair Armrest Arm Pads (Set of 2) S2724-3
Asin: B00CEZKFO0 | Model: S2724-3 | PartNumber: S2724-3 | Ean: 0051520144514 | UPC: 051520144514
1/4-20 Threaded Mounting Screw Holes (Hardware Not Included).
Universal - Left Or Right Side (Both Are The Same) - Sold As A Pair - Set Of 2.
Cut-Out Area On Underside Of Arm Pad For Mounting Fixed Or Adjustable Arms Measures 5 3/4" Long X 1 3/4" Wide.
Mounting Screw Holes Are 4" (100Mm) Apart.
Features
- 4" Wide x 10" Long
- Mounting screw holes are 4 (100mm) apart
- 1/4-20 threaded mounting screw holes (hardware not included)
- Cut-out area on underside of arm pad for mounting fixed or adjustable arms measures 5 3/4 long x 1 3/4 wide
- Universal - left or right side (both are the same) - Sold as a pair - Set of 2
- See more on Amazon...
Brand: chairpartsonline | Manufacturer: chairpartsonline
Dimensions: 1.46 x 10.00 x 4.13 Inches | Weight: 1.00 pounds
See On Amazon #22
Replacement Office Chair Armrest Arm Pads - Set of 2 - S1697-1
Asin: B00CEZLP1W | Model: S1697-1 | PartNumber: S1697-1 | Ean: 0735201994642 | UPC: 735201994642
4" (100Mm) Mounting Hole Pattern.
Black.
Universal Left Or Right Side **Note - Ships As A Set Of 2.
1/4-20 Threaded Mounting Screw Holes (Hardware Not Included).
Features
- 9.5" Long x 3" Wide
- 1/4-20 threaded mounting screw holes (hardware not included)
- 4 (100mm) mounting hole pattern
- Universal Left or Right side **Note - Ships as a set of 2
- Black
- See more on Amazon...
Brand: chairpartsonline | Manufacturer: chairpartsonline
Dimensions: 1.50 x 10.00 x 3.00 Inches
See On Amazon #23
2" Replacement Hard Floor Office Chair or Stool Caster Wheels - with Brake (Set of 5) - S5420-5
Asin: B0779GBJQP | Model: S2421-5 | PartNumber: S2421-5 | Ean: 0735201995892 | UPC: 735201995892
Softer Wheel Style Is Better For Harder Floors Such As Hardwood, Laminate, Tile, Plastic Chair Mats, Etc..
Black.
Hooded Double / Twin Soft Wheel Design With 2" Wheels For Hard Floors.
Standard 7/16"X7/8" (11Mm X 22Mm) Wire Grip Ring Mounting Stem.
Features
- 2" (50mm) wheel size with manual locking brake holds wheels from rolling
- Standard 7/16x7/8 (11mm x 22mm) wire grip ring mounting stem
- Softer wheel style is better for harder floors such as hardwood, laminate, tile, plastic chair mats, etc.
- Hooded double / twin soft wheel design with 2 wheels for hard floors
- Black
- See more on Amazon...
Brand: chairpartsonline | Manufacturer: chairpartsonline
Dimensions: 2.00 x 12.00 x 2.00 Inches
See On Amazon #24
Height Adjustable Office Chair Armrest w/Arm Pads (Pair) S4761-K - Replacement Arms
Asin: B00K7FBJB2 | Model: S4761-K-Pair | PartNumber: S4761-K-Pair | Ean: 0050847614120 | UPC: 050847614120
Push Button On Bottom Side Of Arm Post To Fold Arm Down / Rearward.
Bottom Bracket Mounting Holes Are Slots - See Pictures For Mounting Hole Pattern Dimensions.
Bottom Bracket Mounts To Underside Of Chair Seats That Have A Matching Mounting Hole Pattern - **Note: These Arms Will Not Mount To All Seats - Please Check Your Mounting Hole Pattern Before Ordering. *** Mounting Screw Hardware For Mounting To Seat Not Included.
Push Button On Side Of Arm For Vertial Adjustment - 2.75" Of Vertical Height Adjustment Range.
Features
- Height adjustable folding / fold-away chair armrest with arm pads
- Push button on side of arm for vertial adjustment - 2.75 of vertical height adjustment range
- Push button on bottom side of arm post to fold arm down / rearward
- Bottom bracket mounts to underside of chair seats that have a matching mounting hole pattern - **Note: These arms will not mount to all seats - please check your mounting hole pattern before ordering. *** Mounting screw hardware for mounting to seat not included
- Bottom bracket mounting holes are slots - See pictures for mounting hole pattern dimensions
- See more on Amazon...
Brand: chairpartsonline | Manufacturer: chairpartsonline
Dimensions: 6.50 x 12.50 x 10.00 Inches
See On Amazon #25
2" Replacement Office Chair or Stool Caster Wheels - with Brake (Set of 5) - S2421-5
Asin: B00HVK8GGC | Model: S2421-5 | PartNumber: S2421-5 | Ean: 1132014242110
Standard Hard Nylon Plastic Wheels - Ideal For Use On Carpeted Surfaces And Plastic Chair Mats.
Black.
Set Of 5 Casters.
Standard 7/16"X7/8" (11Mm X 22Mm) Wire Grip Ring Mounting Stem (Universal).
Features
- 2" (50mm) wheel size with manual locking brake holds wheels from rolling
- Standard 7/16x7/8 (11mm x 22mm) wire grip ring mounting stem (universal)
- Standard hard nylon plastic wheels - Ideal for use on carpeted surfaces and plastic chair mats
- Set of 5 Casters
- Black
- See more on Amazon...
Brand: chairpartsonline | Manufacturer: Generic
Dimensions: 2.00 x 12.00 x 2.00 Inches
See On Amazon #26
Replacement Office Chair Tilt Control Seat Mechanism w/ 3.8" x 7.2" Mounting Holes- S4264-1
Asin: B00CEYDXN6 | Model: S4264-1 | PartNumber: S4264-1 | Ean: 0735201995168 | UPC: 735201995168
Tilt Control - Push Lever In To Lock Tilt, Pull Out To Unlock.
Black.
Twist Hand Wheel To Tighten Or Loosen (Adjust) Backward Tilt Tension.
Single Lever For Gas Cylinder Height Activation - Accepts Standard Tapered Gas Lift Cylinders.
Features
- Replacement office chair tilt mechanism with 3.8" wide x 7.2" long screw mounting hole pattern
- Single lever for gas cylinder height activation - Accepts standard tapered gas lift cylinders
- Tilt control - push lever in to lock tilt, pull out to unlock
- Twist hand wheel to tighten or loosen (adjust) backward tilt tension
- Black
- See more on Amazon...
Brand: chairpartsonline | Manufacturer: chairpartsonline
Dimensions: 11.00 x 12.00 x 5.00 Inches | Weight: 4.50 pounds
See On Amazon #27
Short Bell Glides for Office, Task, & Desk Chairs or Stools - Low Profile - Replacement- (5 Pack) - S0005-5
Asin: B00OGVBI5U | Model: S0005-5 | PartNumber: S0005-5 | Ean: 0721000520144 | UPC: 721000520144
Standard 7/16"X7/8" (11Mm X 22Mm) Grip Ring Mounting Stem Inserts Into Most Standard Office Chair Or Stool Bases.
Set Of 5.
Low Profile Bell Glide Design Black Plastic Glide With Steel Mounting Stem.
1.5" (35Mm) Overall Glide Height (Not Including Mounting Stem).
Features
- 2" (50mm) Width at Bottom
- 1.5 (35mm) overall glide height (not including mounting stem)
- Standard 7/16x7/8 (11mm x 22mm) grip ring mounting stem inserts into most standard office chair or stool bases
- Low profile bell glide design black plastic glide with steel mounting stem
- Set of 5
- See more on Amazon...
Brand: chairpartsonline | Manufacturer: chairpartsonline
Dimensions: 2.00 x 2.00 x 2.00 Inches
See On Amazon #28
Heavy Duty Replacement Office Chair Caster Wheels 500 lbs Chair Capacity- (Set of 5) - S5490-5
Asin: B077BBNRM7 | Model: S3253 | PartNumber: S3253 | Ean: 0735201995908 | UPC: 735201995908
Fits Into Most Standard Chair Bases With Its 7/16" X 7/8" (11Mm X 22Mm) Wire Grip Ring Mounting Stem.
Black.
Hard Nylon Plastic Wheels Measure 2.17" Wide - Ideal For Use On Carpet And Plastic Chair Mats.
Supports Up To 500 Lbs As A Set Of 5.
Features
- Set of 5 heavy duty replacement office chair casters
- Supports up to 500 lbs as a set of 5
- Fits into most standard chair bases with its 7/16 x 7/8 (11mm x 22mm) wire grip ring mounting stem
- Hard nylon plastic wheels measure 2.17 wide - Ideal for use on carpet and plastic chair mats
- Black
- See more on Amazon...
Brand: chairpartsonline | Manufacturer: chairpartsonline
Dimensions: 3.00 x 10.00 x 2.00 Inches | Weight: 1.00 Pounds
See On Amazon #29
chairpartsonline 2" Standard Replacement Furniture Casters w/Square Mounting Plate - 1" x 1" Screw Holes (Set of 5) - S3420
Asin: B00CDTR162 | Model: S3420 | PartNumber: S3420
Mounting Screw Hole Spacing On Plate Is 1" X 1" With Holes That Are 0.20" / (5Mm) Wide (Mounting Hardware Not Included).
Set Of 5 Casters.
Overall Distance From Floor To Top Of Mounting Plate Is Approximately 2.57".
Mounting Plate Measures 1.5" X 1.5" Overall.
Features
- 2" (50mm) wheel size - Standard hard plastic nylon wheels - Black
- Mounting plate measures 1.5 x 1.5 overall
- Mounting screw hole spacing on plate is 1 x 1 with holes that are 0.20 / (5mm) wide (mounting hardware not included)
- Overall distance from floor to top of mounting plate is approximately 2.57
- Set of 5 Casters
- See more on Amazon...
Brand: chairpartsonline
Dimensions: 3.00 x 9.00 x 2.00 Inches
See On Amazon #30
Replacement Gas Lift Cylinder Pneumatic Shock - Fits Herman Miller Equa I Chair - Non-OEM S2681
Asin: B00K0ZE4IY | Model: S2681-2 | PartNumber: S2681-2 | Ean: 8126052922014
Width Of Piston Is 28Mm (1.10").
Attachment Hardware Included: Washers, Bearing Kit, & Retaining Clip.
Overall Length From End To End When Fully Extended Is 15.6" & 10.6" When Fully Compressed.
Piston Stroke / Travel Height Adjustment Range Of 5" (Up & Down).
Features
- Premium quality replacement gas lift cylinder made to fit only the Herman Miller Equa I chair - Non-OEM *** Does not fit other chairs
- Piston stroke / travel height adjustment range of 5 (up & down)
- Width of piston is 28mm (1.10)
- Overall length from end to end when fully extended is 15.6 & 10.6 when fully compressed
- Attachment hardware included: washers, bearing kit, & retaining clip
- See more on Amazon...
Brand: chairpartsonline | Manufacturer: chairpartsonline
Dimensions: 3.50 x 9.00 x 1.50 Inches | Weight: 1.00 Pounds
See On Amazon