Crazyracer - Buying Guide
Last Updated: 04/18/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
Aluminum Steering Block Knuckle Arm W/Rubber Shielded Bearings -4PCS Blue for Traxxas 1/10 Old E-REVO EREVO Summit E-MAXX T-MAXX3.3 Slayer Pro 4X4 5334R
Asin: B072BSKM7N | Ean: 6357170936818
Please Check The Original Nubmer To Determin If It Fit Your Car Or Not.
Aluminum More Durable And Cool.
Original Number 5334R.
Features
- Notice: They don't fit 1/10 new E-Revo 2.0 VXL
- Original Number 5334R
- Please check the original nubmer to determin if it fit your car or not
- Aluminum more durable and cool
- See more on Amazon...
Brand: EPTNNASO | Manufacturer: CrazyRacer
Weight: 0.27 Pounds
See On Amazon #2
Aliminum Servo Horns Steering Arms 25T Blue for Traxxas REVO E-REVO 2.0 Summit Slayer Pro 4x4 XO-1 T-MAXX 5345
Asin: B07MDJ2VQR | Model: ER024-B | PartNumber: ER024-B | Ean: 8002126032929
Please Check The Original Nubmer To Determin If It Fit Your Car Or Not..
Aluminum More Durable And Cool..
Original Number:5345.
Features
- It's upgrade parts.
- Original Number:5345
- Please check the original nubmer to determin if it fit your car or not.
- Aluminum more durable and cool.
- See more on Amazon...
Brand: EPTNNASO | Manufacturer: CrazyRacer
Weight: 0.03 pounds
See On Amazon #3
Aluminum Servo Steering Linkage Tie Rod 46MM for Traxxas 1/5 XMAXX 7747 1/10 MAXX 8947 Blue
Asin: B071LTVTSY | Ean: 6357170936924
Please Check The Original Nubmer To Determin If It Fit Your Car Or Not..
What You See In The Main Picture Is What You Will Receive..
Original Number:7747 8947.
Features
- It's upgrade part
- Original Number:7747 8947
- Please check the original nubmer to determin if it fit your car or not.
- What you see in the main picture is what you will receive.
- See more on Amazon...
Brand: EPTNNASO | Manufacturer: CrazyRacer
Weight: 0.01 Pounds
See On Amazon #4
Stainless Steel Front Middle Rear Skid Plate Chassis Armor (4pcs) for Traxxas UDR Unlimited Desert Racer
Asin: B07D5CRTRV | Ean: 7177064562546
What You See In The Main Picture Is What You Will Receive..
Features
- With 3M double tape as accessaries.
- What you see in the main picture is what you will receive.
- See more on Amazon...
Brand: EPTNNASO | Manufacturer: CrazyRacer
Weight: 0.88 Pounds
See On Amazon #5
Aluminum Main Gear Cover Blue for Traxxas 1/10 MAXX 8987
Asin: B099K5FG5D | Model: MAXX038GC-B | PartNumber: MAXX038GC-B | Ean: 9331361186579
Please Go To The Official Website To Check The Original Nubmer To Determin If It Fit Your Car Or Not..
What You See In The Main Picture Is What You Will Receive..
Original Number:8987.
Features
- Aluminum more durable and cool
- Original Number:8987
- Please go to the official website to check the original nubmer to determin if it fit your car or not.
- What you see in the main picture is what you will receive.
- See more on Amazon...
Brand: EPTNNASO | Manufacturer: CrazyRacer
Weight: 0.13 pounds
See On Amazon #6
2pcs Thicker Harder Steel Springs Gold for Traxxas 1/5 XMaxx Shocks 7766
Asin: B08BJ2GJY1 | Model: TXM28SP-GD | PartNumber: TXM28SP-GD | Ean: 8435315928237, 0747992974604 | UPC: 747992974604
Wire Diameter:2.8Mm.
What You See In The Main Picture Is What You Will Receive..
Material:Harden Steel.
It's Harder Than Original 7766. The Original Wire Diameter Is 1.7Mm..
Features
- Replaces: 1/5 XMAXX 7766
- It's harder than original 7766. The original wire diameter is 1.7mm.
- Wire Diameter:2.8mm
- Material:Harden Steel
- What you see in the main picture is what you will receive.
- See more on Amazon...
Brand: EPTNNASO | Manufacturer: CrazyRacer
See On Amazon #7
Harden Steel 50T Main Spur Gear 1 Mod M1 for Traxxas 1/5 X-Maxx 1/10 E-Revo 2.0 MAXX 1/7 XO-1 1/6 XRT 6448
Asin: B073SSMC4D | Ean: 7849717668591
Will Fit 1/10 E-Revo 2.0 Maxx 1/7 Xo-1 1/5 Xmaxxx 6S 8S 1/6 Xrt.
What You See In The Main Picture Is What You Will Receive.
Material Harden Steel.
Do Not Use The Pin System For Setting The X-Maxx Gear Mesh. Instead, Manually Set The Gear Mesh Without The Pins.With The Pins Removed, Use The Four 4X16mm Button-Head Cap Screws On The Bottom To Set Gear Mesh. Loosen The Four 4X16mm Button-Head Cap Screws. Cut A Narrow Strip Of Notebook Paper And Run It Into The Gear Mesh. Slide The Motor And Pinion Gear Into The Spur Gear. Tighten The Four 4X16mm Button-Head Cap Screws, And Then Remove The Strip Of Paper. You Should Be Able To Run A Fresh Strip Of Paper Through The Gears Without Binding Them..
Features
- Original Number 6448 Please check the original nubmer to determin if it fit your car or not
- Do NOT use the pin system for setting the X-Maxx gear mesh. Instead, manually set the gear mesh without the pins.With the pins removed, use the four 4x16mm button-head cap screws on the bottom to set gear mesh. Loosen the four 4x16mm button-head cap screws. Cut a narrow strip of notebook paper and run it into the gear mesh. Slide the motor and pinion gear into the spur gear. Tighten the four 4x16mm button-head cap screws, and then remove the strip of paper. You should be able to run a fresh strip of paper through the gears without binding them.
- Will fit 1/10 E-Revo 2.0 MAXX 1/7 XO-1 1/5 XMAXXX 6S 8S 1/6 XRT
- Material Harden Steel
- What you see in the main picture is what you will receive
- See more on Amazon...
Brand: CrazyRacer | Manufacturer: CrazyRacer
See On Amazon #8
Dustproof Rock Snow Dirt Resist Guard Chassis Cover-1SET Black for Traxxas Slash 4X4 (Non-LCG)
Asin: B0742BYV5Z | Ean: 7849717668683
The Length Of The Dirt Cover Is About 310Mm.The Maximum Stretch Length Of The Rear Rubber Band Is About 140Mm.The Maximum Width Is About 220Mm..
Breathable And Water Repellent Nylon Mesh,Protects Chassis From Dirt Snow Stone And So On..
Will Fit :Traxxas 1/10 Slash4x4 (Non-Lcg Chassis).
Features
- Photos only to show how to use.Not include the original car.
- Will fit :Traxxas 1/10 SLASH4X4 (non-LCG chassis)
- The length of the dirt cover is about 310mm.The maximum stretch length of the rear rubber band is about 140mm.The maximum width is about 220mm.
- Breathable and Water repellent Nylon mesh,protects chassis from dirt snow stone and so on.
- See more on Amazon...
Brand: EPTNNASO | Manufacturer: CrazyRacer
Weight: 0.07 pounds
See On Amazon #9
Front Lower Arm Tie Bar Mount Suspension Pin Retainer for Traxxas 1/10 MAXX 8916 8926 Aluminum Blue
Asin: B09C3GKF2M | Model: MAXX008-B | PartNumber: MAXX008-B | Ean: 9331361186999
Aluminum More Durable And Cool.
What You See In The Main Picture Is What You Will Receive..
Please Go To The Official Website To Check The Original Nubmer To Determin If It Fit Your Car Or Not..
Features
- Original Number:8916 8926
- Please go to the official website to check the original nubmer to determin if it fit your car or not.
- Aluminum more durable and cool
- What you see in the main picture is what you will receive.
- See more on Amazon...
Brand: CrazyRacer | Manufacturer: CrazyRacer
Weight: 0.11 pounds
See On Amazon #10
Aluminum Differential Diff Case -1PC Set Blue for Traxxas 1/5 X-MAXX X MAXX 1/6 XRT 7781
Asin: B072BBYNK1 | Ean: 6357170936412
Please Check The Original Nubmer To Determin If It Fit Your Car Or Not..
What You See In The Main Picture Is What You Will Receive..
Aluminum More Durable And Cool.
Original Number 7781.
Features
- It's upgrade part Will fit 1/5 X MAXX 1/6 XRT
- Original Number 7781
- Please check the original nubmer to determin if it fit your car or not.
- Aluminum more durable and cool
- What you see in the main picture is what you will receive.
- See more on Amazon...
Brand: EPTNNASO | Manufacturer: CrazyRacer
See On Amazon #11
Aluminum Servo Steering Linkage Tie Rod 46MM Red for Traxxas 1/5 XMAXX 7747 1/10 MAXX 8947
Asin: B0714QZQTX | Ean: 6357170936931
Please Check The Original Nubmer To Determin If It Fit Your Car Or Not..
What You See In The Main Picture Is What You Will Receive..
Original Number:7747 8947.
Features
- It's upgrade part
- Original Number:7747 8947
- Please check the original nubmer to determin if it fit your car or not.
- What you see in the main picture is what you will receive.
- See more on Amazon...
Brand: EPTNNASO | Manufacturer: CrazyRacer
Weight: 0.01 pounds
See On Amazon #12
Aluminum Steering Bellcrank Assembly Blue for Traxxas 1/10 MAXX 8946
Asin: B09F9C9VNV | Model: MAXX048-B | PartNumber: MAXX048-B | Ean: 9339130513670
Aluminum More Durable And Cool.
What You See In The Main Picture Is What You Will Receive..
The Bearing Size As The Same As Original.
Please Go To The Official Website To Check The Original Nubmer To Determin If It Fit Your Car Or Not..
Features
- Original Number:8946
- Please go to the official website to check the original nubmer to determin if it fit your car or not.
- Aluminum more durable and cool
- The bearing size as the same as original
- What you see in the main picture is what you will receive.
- See more on Amazon...
Brand: CrazyRacer | Manufacturer: CrazyRacer
Weight: 0.12 pounds
See On Amazon #13
EPTNNASO Aluminum Front Suspension Link Mount Red for Arrma AR330378 AR330379 Front Felony Infraction Kraton Limitless Mojave Outcast Notorious Senton Tailon Typhon
Asin: B098L2VQFP | Model: MAK008-R | PartNumber: MAK008-R | Ean: 9331361186081
Please Go To The Official Website To Check The Original Nubmer To Determin If It Fit Your Car Or Not..
What You See In The Main Picture Is What You Will Receive..
Original Number:Ar330378 Ar330379(Front).
Features
- Aluminum more durable and cool
- Original Number:AR330378 AR330379 front)
- Please go to the official website to check the original nubmer to determin if it fit your car or not.
- What you see in the main picture is what you will receive.
- See more on Amazon...
Brand: EPTNNASO | Manufacturer: CrazyRacer
Weight: 0.06 pounds
See On Amazon #14
4pcs High Lift Shock Springs (21lb) Gold for Traxxas E-Revo New E Revo 2.0 Revo Slayer Pro 4X4 Summit 5460
Asin: B08BHYMKKV | Ean: 8435315928244, 9094897193502, 0747992974611, 0747992977902 | UPC: 747992974611, 747992977902
These Springs Are Approximately 5.6Mm Longer Than The Stock Springs To Help Compensate And Raise The Vehicle After Adding Heavy Duty Upgrades Or High Capacity Batteries..
Please Check The Asin Of B0763fzqq6 If You Want More Softer Springs Which Are About 19Lb.
Adding These Springs Will Add 5 To 10 Percent More Ground Clearance To The Vehicle, Depending On The Vehicle Components Installed. They Are Harder Than Origianl Springs. They Are More Than 21Lb..
Will Fit: Traxxas 1/10 E Revo E Revo 2.0 Vxl Summit 5460 5460A 5460R 5460X.
Features
- Original number 5460 Please check it to determine if it fit your car or not
- Will fit: Traxxas 1/10 E Revo E Revo 2.0 VXL SUMMIT 5460 5460A 5460R 5460X
- These springs are approximately 5.6mm longer than the stock springs to help compensate and raise the vehicle after adding heavy duty upgrades or high capacity batteries.
- Adding these springs will add 5 to 10 percent more ground clearance to the vehicle, depending on the vehicle components installed. They are harder than origianl springs. They are more than 21lb.
- Please check the asin of B0763FZQQ6 if you want more softer springs which are about 19LB
- See more on Amazon...
Brand: CrazyRacer | Manufacturer: CrazyRacer
Weight: 0.13 pounds
See On Amazon #15
Harden Steel 46T Main Spur Gear 1 Mod M1-1 pc for Traxxas 1/5 X-Maxx 1/7 XO-1 1/10 E-Revo 2.0 MAXX 1/6 XRT 6447
Asin: B07GGZH9FT | Ean: 8002126032370
Hard Steel More Durable And Cool.
What You See In The Main Picture Is What You Will Receive..
Will Fit 1/5 X-Maxx 1/7 Xo-1 1/10 E-Revo 2.0 Maxx 1/6 Xrt.
Do Not Use The Pin System For Setting The X-Maxx Gear Mesh. Instead, Manually Set The Gear Mesh Without The Pins.With The Pins Removed, Use The Four 4X16mm Button-Head Cap Screws On The Bottom To Set Gear Mesh. Loosen The Four 4X16mm Button-Head Cap Screws. Cut A Narrow Strip Of Notebook Paper And Run It Into The Gear Mesh. Slide The Motor And Pinion Gear Into The Spur Gear. Tighten The Four 4X16mm Button-Head Cap Screws, And Then Remove The Strip Of Paper. You Should Be Able To Run A Fresh Strip Of Paper Through The Gears Without Binding Them..
Features
- Original Number 6447 Please check the original nubmer to determin if it fit your car or not.
- Do NOT use the pin system for setting the X-Maxx gear mesh. Instead, manually set the gear mesh without the pins.With the pins removed, use the four 4x16mm button-head cap screws on the bottom to set gear mesh. Loosen the four 4x16mm button-head cap screws. Cut a narrow strip of notebook paper and run it into the gear mesh. Slide the motor and pinion gear into the spur gear. Tighten the four 4x16mm button-head cap screws, and then remove the strip of paper. You should be able to run a fresh strip of paper through the gears without binding them.
- Hard steel more durable and cool
- Will Fit 1/5 X-Maxx 1/7 XO-1 1/10 E-Revo 2.0 MAXX 1/6 XRT
- What you see in the main picture is what you will receive.
- See more on Amazon...
Brand: EPTNNASO | Manufacturer: CrazyRacer
Weight: 0.11 Pounds
See On Amazon #16
Aluminum Ajustable Steering Assembly with Bearings Blue for Traxxas 1/5 X-MAXX XMAXX 6S 8S 7746
Asin: B09G1FP23F | Ean: 9339130514318
Please Check The Original Nubmer To Determin If It Fit Your Car Or Not..
There Are 2 Wire Diameter Springs:2.5Mm,2.8Mm.
Original Number:7746.
Features
- It's upgrade parts.
- Original Number:7746
- Please check the original nubmer to determin if it fit your car or not.
- There are 2 wire diameter springs:2.5mm,2.8mm
- See more on Amazon...
Brand: CrazyRacer | Manufacturer: CrazyRacer
See On Amazon #17
Aluminum Rear Gear Cover - 1PC Blue for Traxxas XMAXX X-Maxx 7787
Asin: B06XZMLHG5 | Ean: 6901894632442
Aluminum More Durable And Cool.
What You See In The Main Picture Is What You Will Receive..
Please Check The Original Nubmer To Determin If It Fit Your Car Or Not..
Features
- Original Number:7787
- Please check the original nubmer to determin if it fit your car or not.
- Aluminum more durable and cool
- What you see in the main picture is what you will receive.
- See more on Amazon...
Brand: EPTNNASO | Manufacturer: CrazyRacer
See On Amazon #18
EPTNNASO Dirt Guard Chassis Cover (Short) for Arrrma 1/8 Outcast BLX 6S and 1/10 Kraton 4X4 4S
Asin: B07B2JHVK8 | Ean: 7177064562089
The Length Of The Dirt Cover Is About 340Mm.The Maximum Stretch Length Of The Front Rubber Band Is About 230Mm. The Maximum Stretch Length Of The Rear Rubber Band Is About 190Mm..
Features
- Not include the car in picture. It's only to show how to use.
- The length of the dirt cover is about 340mm.The maximum stretch length of the front rubber band is about 230mm. The maximum stretch length of the rear rubber band is about 190mm.
- See more on Amazon...
Brand: EPTNNASO | Manufacturer: CrazyRacer
Weight: 0.11 pounds
See On Amazon #19
Aluminum Side Trail Bar- 1PR Replace 7723 Blue for Traxxas X-Maxx XMAXX
Asin: B06Y14J7JY | Ean: 6901894632480
Please Check The Original Nubmer To Determin If It Fit Your Car Or Not..
What You See In The Main Picture Is What You Will Receive..
Original Number:7723.
Features
- It's upgrade part
- Original Number:7723
- Please check the original nubmer to determin if it fit your car or not.
- What you see in the main picture is what you will receive.
- See more on Amazon...
Brand: EPTNNASO | Manufacturer: CrazyRacer
See On Amazon #20
Harden Steel Center Front Driveshafts Fit Traxxas UDR 8556 Unlimited Desert Racer
Asin: B082GSRKMZ | Model: UDR237SF | PartNumber: UDR237SF | Ean: 0747992974833, 8435315927858 | UPC: 747992974833
Please Check The Original Nubmer To Determin If It Fit Your Car Or Not..
Splined Design And Harden Steel More Durable.
Original Number:8556.
Features
- It's upgrade parts.
- Original Number:8556
- Please check the original nubmer to determin if it fit your car or not.
- Splined design and harden steel more durable
- See more on Amazon...
Brand: EPTNNASO | Manufacturer: CrazyRacer
See On Amazon #21
Rear Lower Arm Tie Bar Mount Suspension Pin Retainer for Traxxas 1/10 MAXX 8916 8927 Aluminum Blue
Asin: B09C3GFM36 | Model: MAXX009-B | PartNumber: MAXX009-B | Ean: 9331361187033
Aluminum More Durable And Cool.
What You See In The Main Picture Is What You Will Receive..
Please Go To The Official Website To Check The Original Nubmer To Determin If It Fit Your Car Or Not..
Features
- Original Number:8916 8927
- Please go to the official website to check the original nubmer to determin if it fit your car or not.
- Aluminum more durable and cool
- What you see in the main picture is what you will receive.
- See more on Amazon...
Brand: CrazyRacer | Manufacturer: CrazyRacer
See On Amazon #22
Aluminum Coupler Turntable Hitch Silver for 1/14 Tamiya Tractor Truck and Tralier X Parts 10225105
Asin: B09GPGKKRM | Ean: 9339130515292
Please Check The Original Number To Determine If It Fit Your Car Or Not..
Aluminum More Durable And Cool..
Original Number:X Parts 10225105.
Features
- It's upgrade parts.
- Original Number:X Parts 10225105
- Please check the original number to determine if it fit your car or not.
- Aluminum more durable and cool.
- See more on Amazon...
Brand: CrazyRacer | Manufacturer: CrazyRacer
Weight: 0.05 pounds
See On Amazon #23
Shock Damper High Elastic Sleeves Dirt Dust Resist Guard Cover - 4pcs Blue for Traxxas 1/5 X-MAXX XMAXX
Asin: B0787LV8N7 | Ean: 7177064561709
Material:High Elastic Nylon.
What You See In The Main Picture Is What You Will Receive..
Breathable.
Will Fit: Traxxas 1/5 X-Maxx Shocks.
Features
- It's upgrade part
- Will Fit: Traxxas 1/5 X-MAXX Shocks
- Material:High Elastic Nylon
- Breathable
- What you see in the main picture is what you will receive.
- See more on Amazon...
Brand: EPTNNASO | Manufacturer: CrazyRacer
Weight: 0.04 pounds
See On Amazon #24
Chassis Dirt Dust Snow Resist Guard Cover-1SET Black for Traxxas Rally Slash 4x4 LCG Not for OBA
Asin: B07428W9S4 | Ean: 7849717668706
The Length Of The Dirt Cover Is About 310Mm.The Maximum Stretch Length Of The Rear Rubber Band Is About 130Mm.The Maximum Width Is About 160Mm..
Breathable And Water Repellent Nylon Mesh,Protects Chassis From Dirt Snow Stone And So On..
Will Fit :Traxxas 1/10 Rally Slash 4X4 Lcg.
Features
- Photos only to show how to use.Not include the original car.
- Will fit :Traxxas 1/10 Rally Slash 4x4 LCG
- The length of the dirt cover is about 310mm.The maximum stretch length of the rear rubber band is about 130mm.The maximum width is about 160mm.
- Breathable and Water repellent Nylon mesh,protects chassis from dirt snow stone and so on.
- See more on Amazon...
Brand: EPTNNASO | Manufacturer: CrazyRacer
Weight: 0.07 pounds
See On Amazon #25
Chassis Dustproof Dirt Snow Rock Resist Guard Cover Fit Traxxas 1/10 RC Slash 4X4 VXL OBA 68086-24
Asin: B081YXNC5R | Ean: 8435315927810, 0747992974796 | UPC: 747992974796
Waterproof And Breathable..
Not Include The Car In The Picture..
Brand: EPTNNASO | Manufacturer: CrazyRacer
See On Amazon #26
All Aluminum Main Gear Upper Cover Red for Traxxas 1/5 X-MAXX 6S 8S 7787
Asin: B098L22S3R | Ean: 9331361186272
Please Go To The Official Website To Check The Original Nubmer To Determin If It Fit Your Car Or Not..
What You See In The Main Picture Is What You Will Receive..
Original Number:7787.
Features
- Aluminum more durable and cool
- Original Number:7787
- Please go to the official website to check the original nubmer to determin if it fit your car or not.
- What you see in the main picture is what you will receive.
- See more on Amazon...
Brand: EPTNNASO | Manufacturer: CrazyRacer
Weight: 0.14 pounds
See On Amazon #27
Harden Steel Spur Main Gear 50T 32P 0.8M for Traxxas Slash Stampede Rustler 4x4 6842
Asin: B08JPVGD1H | Model: SSLA050T-BK | PartNumber: SSLA050T-BK | Ean: 0747992974147, 8435315928855, 0747992978329 | UPC: 747992974147, 747992978329
Hard Steel More Durable And Cool.
What You See In The Main Picture Is What You Will Receive.
Will Fit Slash 4X4 Rustler 4X4 Stampede 4X4.
Features
- Original number 6842
- Will fit Slash 4X4 Rustler 4X4 Stampede 4x4
- Hard steel more durable and cool
- What you see in the main picture is what you will receive
- See more on Amazon...
Brand: EPTNNASO | Manufacturer: CrazyRacer
Dimensions: 0.50 x 2.00 x 2.00 Inches
See On Amazon #28
Aluminum Front Center Brace Mount Red for Arrma Kraton Talion Outcast ARA320500
Asin: B09FZCNHKJ | Model: MAK015FA-R | PartNumber: MAK015FA-R | Ean: 9339130514295
Please Go To The Official Website To Check The Original Nubmer To Determin If It Fit Your Car Or Not..
Aluminum More Durable And Stable..
Original Number:Ara320500.
Features
- It's upgrade parts.
- Original Number:ARA320500
- Please go to the official website to check the original nubmer to determin if it fit your car or not.
- Aluminum more durable and stable.
- See more on Amazon...
Brand: CrazyRacer | Manufacturer: CrazyRacer
Weight: 0.11 Pounds
See On Amazon #29
Aluminum Front Gear Box Protectoer Mount Blue for Traxxas E-REVO 2.0 E-REVO REVO Summit Slayer Pro 4x4 5343X
Asin: B07DK7FS41 | Ean: 8002126031588
Please Check The Original Nubmer To Determin If It Fit Your Car Or Not..
Aluminum More Durable And Cool..
Original Number:5343X.
Features
- It's upgrade part
- Original Number:5343X
- Please check the original nubmer to determin if it fit your car or not.
- Aluminum more durable and cool.
- See more on Amazon...
Brand: EPTNNASO | Manufacturer: CrazyRacer
Weight: 0.02 pounds
See On Amazon #30
Aluminum Throttle Bellcrank Linkage Purple For HPI Savage 25 SS 4.6 85051 85058
Asin: B06ZYGXVK7 | Ean: 6907224812751
Please Check The Original Nubmer To Determin If It Fit Your Car Or Not..
What You See In The Main Picture Is What You Will Receive..
Aluminum More Durable And Cool.
Original Number:85051 85058.
Features
- It's upgrade part
- Original Number:85051 85058
- Please check the original nubmer to determin if it fit your car or not.
- Aluminum more durable and cool
- What you see in the main picture is what you will receive.
- See more on Amazon...
Brand: EPTNNASO | Manufacturer: CrazyRacer
See On Amazon