Enrand - Buying Guide
Last Updated: 04/19/2024
Share on
Bestselling from Enrand on Amazon
- EnRand 74mm 14 Flute Oil Filter Wrench for Mercedes Benz, Audi, Sprinter,VW,Porsche, Volkswagen, Maz...
- EnRand Cam Gear Lock/Camlock Tool fit for Subaru DOHC WRX, STi, FXT, LGT OBXT Service Tools
- Ignition Switch Replacement for John Deere X100 Series, X300 X304 X310 X390 X500 X520 X530 X534 X540...
- EnRand 68RFE Transmission Spin On Filter Screw kit, for Dodge Ram 2500 3500 Cummins trucks 6.7L,Stee...
- Fuel Filter Air Bleeder Service Kit Compatible with Ford Powerstroke 6.4L 2008~2010 Diesel Engines F...
- EnRand Front Light Bezel Headlight Cover Trim for Jeep Renegade 2015 2016 2017 2018,Angry Birds Eye ...
- EnRand Camshaft Holding/Retaining Tool for Chevrolet Colorado GMC Canyon GMT360 fit 4.2L 3.5L 2.8L i...
- 24 Pcs Lower Unit Drain Plug Seal Gasket, Gearcase Lube Drain Screw Washer Replacement for Mercury M...
- Trim Tilt hydraulic Ram Cylinder hose kit Fit for Mercruiser Alpha One Gen Two
- F880 Rear Differential Cover Gasket Compatible with Ford 8.8 Axles
#1
EnRand 74mm 14 Flute Oil Filter Wrench for Mercedes Benz, Audi, Sprinter,VW,Porsche, Volkswagen, Mazda, Mobil1, Bosch, Mahle
Asin: B075CCB3T1 | Model: ENR-0201-01027 | PartNumber: ENR-0201-01027 | Ean: 0740931670094 | UPC: 740931670094
🔧Made Of High Quality Aluminum, Designed For Maximum Torque, High Strength Forged Alloy, Oem Design..
🔧At Enrand, We Serious To Offer The Best Products And Services To Customers. Provide Friendly ,Easy-To-Reach Support. Any Question You Have, Please Contact Enrand Support Team. We Will Get You Back Within 24 Hours..
🔧Easy Removal: Provides Multiple Contact Points To Engage The Housing Cap Securely For Maximum Torque..
🔧Fits Most Mercedes And Sprinters (Not 3.0L Diesel), Porsche, Many Vw And Audi Engines, And Some Ford, Mercury, And Mazda 2.3L And 2.5L Engines. Also Fits Many Mobil1, Bosch, Mahle, And Other Spin On Aftermarket Filters..
Features
- This oil filter wrench fits select cartridge style oil filter caps and spin-off style filters that have 14 flutes which measure 74mm in diameter .
- Fits most Mercedes and Sprinters (not 3.0L Diesel), Porsche, many VW and Audi engines, and some Ford, Mercury, and Mazda 2.3L and 2.5L engines. Also fits many Mobil1, Bosch, Mahle, and other spin on aftermarket filters.
- Made of High quality aluminum, designed for maximum torque, high strength forged alloy, OEM design.
- Easy Removal: Provides multiple contact points to engage the housing cap securely for maximum torque.
- At EnRand, we serious to offer the best products and services to customers. Provide friendly ,easy-to-reach support. Any question you have, please contact EnRand Support Team. We will get you back within 24 hours.
- See more on Amazon...
Brand: EnRand | Manufacturer: ENR
Dimensions: 1.62 x 3.40 x 3.40 inches | Weight: 0.11 pounds
Warranty: At EnRand, we serious to offer the best products and services to customers. Provide friendly ,easy-to-reach support. Any question you have, please contact EnRand Support Team. We will get you back within 24 hours.
See On Amazon #2
EnRand Cam Gear Lock/Camlock Tool fit for Subaru DOHC WRX, STi, FXT, LGT OBXT Service Tools
Asin: B07N4GVR7Z | Model: 13 | PartNumber: 13 | Ean: 0738596582388 | UPC: 738596582388
🛠️At Enrand, We Serious To Offer The Best Products And Services To Customers. Provide Friendly ,Easy-To-Reach Support. Any Question You Have, Please Contact Enrand Support Team. We Will Get You Back Within 24 Hours..
🛠️Locks The Lh Side Cam Sprockets From Turning When The Timing Belt Is Removed; Prevents Cam Sprockets From Spinning When Belt Is Removed And Eliminates Potential Valve Damage; Saves Time! Makes Timing Belt Changes Faster And Easier Especially When Done With One Person; Strong Neodymium Magnets Ensure The Tool Stays In Place Even If Bumped; Curved Plate Allows Easy Viewing Of Sprocket Timing Marks;.
Features
- Fit For : >>fit for 02+ Impreza WRX and WRX STI with 2.0L or 2.5L DOHC Turbo engines (EJ205, EJ207, EJ255, EJ257) >>fit for 04-11 Forester XT with DOHC Turbo engines >>fit for 05-10 Legacy GT with DOHC Turbo engines >>fit for 05-10 Outback XT with DOHC Turbo engines >>05-06 Saab 9-2X Aero with DOHC Turbo engines >>fit for 04-06 Baja with DOHC Turbo engines
- Locks the LH side cam sprockets from turning when the timing belt is removed; Prevents cam sprockets from spinning when belt is removed and eliminates potential valve damage; Saves time! Makes timing belt changes faster and easier especially when done with one person; Strong neodymium magnets ensure the tool stays in place even if bumped; Curved plate allows easy viewing of sprocket timing marks;
- At EnRand, we serious to offer the best products and services to customers. Provide friendly ,easy-to-reach support. Any question you have, please contact EnRand Support Team. We will get you back within 24 hours.
- See more on Amazon...
Brand: EnRand | Manufacturer: ENR
Dimensions: 1.50 x 2.00 x 7.00 inches | Weight: 0.56 pounds
See On Amazon #3
Ignition Switch Replacement for John Deere X100 Series, X300 X304 X310 X390 X500 X520 X530 X534 X540 with 2 Keys, 4 Positions with Headlight Control, 7 Prongs
Asin: B0C62JYMFD | Model: X100 | PartNumber: X100 | Ean: 0768637580523 | UPC: 768637580523
Both Sides Of The X100 Series Starter Ignition Switch Effectively Prevent Vibration From Loosening And Falling Off While Mowing. Configured As A 4-Position With 7 Terminals Snap-In Switch Design Allows For Lightning Fast Installation.Easy To Install. Disconnect The Battery; Remove The Ignition Switch; Install The New Ignition Switch; Reconnect The Battery..
At Enrand, We Serious To Offer The Best Products And Services To Customers. Provide Friendly ,Easy-To-Reach Support. Any Question You Have, Please Contact Enrand Support Team. We Will Get You Back Within 24 Hours..
Package Includes: 1 * Starter Ignition Switch, 2 * Key..
Made Of Premium Material For Durability And Long Lifespan. Black Plastic Switch, Anti-Dust, Good Wear And Corrosion Resistance, Long Service Life. White Tip Icon Printed On The Switch Surface For Better Instruction. Superior Copper Terminals, Good Electrical Conductivity, Anti-Rust. Durable Steel Keys, Good Fitment, Not Easy To Fall Off While Working. The End Of The Key Is Protected By A Plastic Casing To Prevent Rust And No Slippage When Twisting..
Features
- Fits for John Deere X100 Series X300 X304 X310 X320 X324 X330 X340 X350 X354 X360 X370 X380 X384 X390 X500 X520 X530 X534 X540. also compatible with X Series tractors with headlight positions.
- Made of premium material for durability and long lifespan. Black plastic switch, anti-dust, good wear and corrosion resistance, long service life. White tip icon printed on the switch surface for better instruction. Superior copper terminals, Good electrical conductivity, anti-rust. Durable Steel Keys, good fitment, Not easy to fall off while working. The end of the key is protected by a plastic casing to prevent rust and no slippage when twisting.
- Both sides of the X100 Series starter ignition switch effectively prevent vibration from loosening and falling off while mowing. Configured as a 4-position with 7 terminals Snap-in switch design allows for lightning fast installation.Easy to install. Disconnect the battery; Remove the ignition switch; Install the new ignition switch; Reconnect the battery.
- Package Includes: 1 * starter ignition switch, 2 * key.
- At EnRand, we serious to offer the best products and services to customers. Provide friendly ,easy-to-reach support. Any question you have, please contact EnRand Support Team. We will get you back within 24 hours.
- See more on Amazon...
Brand: EnRand | Manufacturer: ENR
Dimensions: 2.00 x 2.00 x 2.00 inches
See On Amazon #4
EnRand 68RFE Transmission Spin On Filter Screw kit, for Dodge Ram 2500 3500 Cummins trucks 6.7L,Steel Upgrade
Asin: B08Y7XHWJT | Model: ENR-68-RFE | PartNumber: ENR-68-RFE | Ean: 0782899254091 | UPC: 782899254091
🔩Features Top Quality Solid Stainless Steel, Durable And Anti Corrosion, Repeatedly Tested To Ensure Excellent Performance And Lasting Service Time..
🔩If Overtightened The Plastic Screw Will Break. We Recommend Replacing The Factory Plastic Screw Immediately When Purchasing A New Or Used Truck Regardless Of The Mileage. The Steel Screw Can Be Used Again And Again During Each Filter Change..
🔩This Is A Must Due Upgrade To Any 68Rfe Whether It Be A Stock Transmission Or Upgraded. This Is Just As Important As Keeping The Fluid Level Correct Because If The Filter Loosens And Falls Off, Complete Transmission Failure Will Occur.The Stock Screw Is Cheap Plastic And Cannot Be Properly Tightened To Insure That It Doesn't Loosen Up Over Time..
🔩Fits 68Rfe Transmissions | Allows Filter To Be Properly Tightened Down..
Features
- Fits for Dodge Ram 2500 3500 Cummins trucks 6.7L.
- Fits 68RFE Transmissions | Allows Filter To Be Properly Tightened Down.
- Features top quality solid stainless steel, durable and anti corrosion, repeatedly tested to ensure excellent performance and lasting service time.
- This is a must due upgrade to any 68RFE whether it be a stock transmission or upgraded. This is just as important as keeping the fluid level correct because if the filter loosens and falls off, complete transmission failure will occur.The stock screw is cheap plastic and cannot be properly tightened to insure that it doesn't loosen up over time.
- If overtightened the plastic screw will break. We recommend replacing the factory plastic screw immediately when purchasing a new or used truck regardless of the mileage. The steel screw can be used again and again during each filter change.
- See more on Amazon...
Brand: EnRand | Manufacturer: ENR
See On Amazon #5
Fuel Filter Air Bleeder Service Kit Compatible with Ford Powerstroke 6.4L 2008~2010 Diesel Engines F250,F350,F450,F550
Asin: B0CR166TZP | Model: FFABSK-F8910 | PartNumber: FFABSK-F8910 | Ean: 0768637586105 | UPC: 768637586105
✔️Air Can Get Into The Fuel System When Changed Fuel Filters, It Will Cause The Engine To Fail To Start. But This Fuel Filter Air Bleeder Service Kit Will Help You Got All The Air Out Of The Fuel System , Definitely A Must Have If You Have A 6.4L Powerstroke Diesel..
✔️Package Includes :1- Extended Length Hose With Schrader Valve Connection &1- Extended Length Transparent Poly Hose &1- 12Mm Banjo Bolt Test Port..
✔️Have 12Mm Banjo Bolt Test Port,The Interface Has Threads, Easy To Install, But Need Make Sure To Tighten The Fittings On The Hose Tight So It Doesn't Leak..
✔️High Quality Polyethylene Hose And Premium Brass Fittings Ensuring Optimal Protection, Service Life, And Safety..
Features
- Compatible with Ford 6.4L Powerstroke Diesel engine, 2008 - 2010 F250 F350 F450 F550.
- High quality polyethylene hose and premium brass fittings ensuring optimal protection, service life, and safety.
- Air can get into the fuel system when changed fuel filters, it will cause the engine to fail to start. But this fuel filter air bleeder service kit will help you got all the air out of the fuel system , definitely a must have if you have a 6.4L Powerstroke Diesel.
- Have 12mm Banjo bolt test port,The interface has threads, easy to install, but need make sure to tighten the fittings on the hose tight so it doesn't leak.
- Package Includes :1- Extended length Hose with Schrader valve connection &1- Extended length transparent poly hose &1- 12mm Banjo bolt test port.
- See more on Amazon...
Brand: EnRand | Manufacturer: ENR
See On Amazon #6
EnRand Front Light Bezel Headlight Cover Trim for Jeep Renegade 2015 2016 2017 2018,Angry Birds Eye Style,Durable UV treated ABS,Upgrade Clip In Version
Asin: B074M79T4K | Model: ENR-0201-01017 | PartNumber: ENR-0201-01017 | Ean: 0714250136968 | UPC: 714250136968
★Giving Your Jeep A "Muscle" Or Aggressive Look And Make Your Jeep Looks Cooler And More Awesome, Furthermore,Protects Your Jeep Front Headlights From Dust, Drit And Rain, Prolong The Lifespan Of Your Lights A Beautiful Enhancement For Your Jeep..
★At Enrand, We Serious To Offer The Best Products And Services To Customers. Provide Friendly ,Easy-To-Reach Support. Any Question You Have, Please Contact Enrand Support Team. We Will Get You Back Within 24 Hours..
★Clip-In Version Can Be Clipped In Easily, It Will Perfectly Match With Original Mounting Holes. With Extra Automotive Grade Double Sided 3M Tape Making The Covers Attach On The Headlight Firmer And More Secure,Just Bolt-On Installation, No Cutting Or Drilling Required..
★Made Of Durable Uv Treated Abs Never Rust ,Corrode Or Peel..
Features
- Fits For Jeep Renegade 2015-2018
- Made Of Durable UV treated ABS Never Rust ,Corrode Or Peel.
- Giving your jeep a Muscle Or Aggressive Look and make your jeep looks cooler and more Awesome, Furthermore,Protects Your Jeep front Headlights From Dust, Drit and Rain, Prolong The Lifespan of Your Lights A Beautiful Enhancement For Your Jeep.
- Clip-in Version Can be clipped in easily, It will perfectly match with original mounting holes. With extra automotive grade double sided 3M Tape making the covers attach on the headlight firmer and more secure,Just Bolt-On installation, No cutting or drilling required.
- At EnRand, we serious to offer the best products and services to customers. Provide friendly ,easy-to-reach support. Any question you have, please contact EnRand Support Team. We will get you back within 24 hours.
- See more on Amazon...
Brand: EnRand | Manufacturer: ENR
Dimensions: 8.00 x 8.00 x 2.00 inches
Warranty: At EnRand, we serious to offer the best products and services to customers. Provide friendly ,easy-to-reach support. Any question you have, please contact EnRand Support Team. We will get you back within 24 hours.
See On Amazon #7
EnRand Camshaft Holding/Retaining Tool for Chevrolet Colorado GMC Canyon GMT360 fit 4.2L 3.5L 2.8L in-Line 6 Cylinder
Asin: B07GY47R11 | Model: 5841843343 | PartNumber: 5841843343 | Ean: 0738596582012 | UPC: 738596582012
🛠️Greatly Work Same As Kmj44221&Otc-J-44221.
🛠️At Enrand, We Serious To Offer The Best Products And Services To Customers. Provide Friendly ,Easy-To-Reach Support. Any Question You Have, Please Contact Enrand Support Team. We Will Get You Back Within 24 Hours..
🛠️Package Included: 1 X Camshaft Holding Tool..
🛠️Work For Chevrolet Colorado Gmc In-Line 6 Cylinder 4.2L 3.5L 2.8L 4 Cylinder:2004-2006 Chevrolet Colorado 2.8L;2004-2006 Gmc Canyon 2.8L;2002-2004 Oldsmobile Bravada 4.2L Vin S;2004-2006 Buick Rainier 4.2L Vin S;2002-2008 Chevrolet Trailblazer 4.2L Vin S;2002-2006 Gmc Envoy 4.2L Vin S;2004-2006 Chevrolet Colorado 3.5L Vin 5 5 Cylinder;2004-2006 Gmc Canyon 3.5L Vin 5 5 Cylinder;2007-2012 2.9L Gmc Canyon;2007-2012 2.9L Chevy Colorado;2007-2012 3.7L Gmc Canyon;2007-2012 3.7L Chevy Colorado..
Features
- Made of high-quality steel plate to hold on at the camshaft TDC position to ensure proper timing during do the cam, gear, chain work to prevent rotation. Make engine work effortless!
- work for Chevrolet Colorado GMC In-line 6 Cylinder 4.2L 3.5L 2.8L 4 Cylinder:2004-2006 Chevrolet Colorado 2.8L;2004-2006 GMC Canyon 2.8L;2002-2004 Oldsmobile Bravada 4.2L vin S;2004-2006 Buick Rainier 4.2L vin S;2002-2008 Chevrolet Trailblazer 4.2L vin S;2002-2006 GMC Envoy 4.2L vin S;2004-2006 Chevrolet Colorado 3.5L vin 5 5 cylinder;2004-2006 GMC Canyon 3.5L vin 5 5 cylinder;2007-2012 2.9L GMC Canyon;2007-2012 2.9L Chevy Colorado;2007-2012 3.7L GMC Canyon;2007-2012 3.7L Chevy Colorado.
- Greatly Work Same as KMJ44221&OTC-J-44221
- PACKAGE INCLUDED: 1 X Camshaft Holding Tool.
- At EnRand, we serious to offer the best products and services to customers. Provide friendly ,easy-to-reach support. Any question you have, please contact EnRand Support Team. We will get you back within 24 hours.
- See more on Amazon...
Brand: EnRand | Manufacturer: ENR
Dimensions: 0.39 x 2.36 x 9.84 inches | Weight: 0.88 pounds
See On Amazon #8
24 Pcs Lower Unit Drain Plug Seal Gasket, Gearcase Lube Drain Screw Washer Replacement for Mercury Marine Outboard Evinude Mercruiser Outdrive Tohatsu 12-19183-3 12-19183Q02 12-19183K02 18-2244
Asin: B0BV22RL5W | Ean: 0768637579350 | UPC: 768637579350
All Seal Gasket Are Produced To Match Mercury Marine's Stringent Original Equipment Manufacturer Performance Specifications..
At Enrand, We Serious To Offer The Best Products And Services To Customers. Provide Friendly ,Easy-To-Reach Support. Any Question You Have, Please Contact Enrand Support Team. We Will Get You Back Within 24 Hours..
Replacement For 18-2945 Sierra Marine,98-102-09 Sei Marine,9-60101 9-60102 Mallory Marine,31170 Glm,Mr-103 Obr Red Rhino,12-19183 12-191832 Mercury Marine..
Made Of High Quality Material With Asbestos Free, Prevent Gear Oil Leaking. For Use On The 3/8-16 Drain/Fill Screw Holes In Outboard And Stern Drive Gearcases..
Features
- Aftermarket Seal Gasket, Blue Color, Includes 24 Pcs.Provide Good Tightness, Solve Leaking Problem,Offering Good Durability & long lasting Service.
- Made of high quality material with asbestos free, prevent gear oil leaking. For use on the 3/8-16 drain/fill screw holes in outboard and stern drive gearcases.
- All Seal Gasket are produced to match Mercury Marine's stringent original equipment manufacturer performance specifications.
- Replacement for 18-2945 Sierra Marine,98-102-09 SEI Marine,9-60101 9-60102 Mallory Marine,31170 GLM,MR-103 OBR Red Rhino,12-19183 12-191832 Mercury Marine.
- At EnRand, we serious to offer the best products and services to customers. Provide friendly ,easy-to-reach support. Any question you have, please contact EnRand Support Team. We will get you back within 24 hours.
- See more on Amazon...
Brand: EnRand | Manufacturer: ENR
See On Amazon #9
Trim Tilt hydraulic Ram Cylinder hose kit Fit for Mercruiser Alpha One Gen Two
Asin: B08XYWD8CP | Ean: 0782899254053 | UPC: 782899254053
🚤For Port And Starboard Trim/Tilt Cylinders. Daily Maintenance Of Your Boat. This Kit Can Perfectly Replace Your Old Leaking, Broken Or Corroded Pipelines. Make Your Boat Driving And Traveling Safer And More Reliable..
At Enrand, We Serious To Offer The Best Products And Services To Customers. Provide Friendly ,Easy-To-Reach Support. Any Question You Have, Please Contact Enrand Support Team. We Will Get You Back Within 24 Hours..
🚤Package Includes:Complete Kit With All Four Hoses..
🚤Fits For Alpha Drives 1991 All And Newer. Also Suitable For Alpha One Gen Two That Is 16-3/16".Replaces For Starboard 32-864960, For Supersedes 32-999021, For Port 32-864959, For Supersedes 32-999031 And For 99904Q (2 Shorter Hoses)..
Features
- Machined from high quality stainless steel to ensure great tolerance and resistance to corrosion and rust in Marine Environment.
- Fits for Alpha drives 1991 all and newer. Also suitable for Alpha One Gen two that is 16-3/16.Replaces for Starboard 32-864960, for Supersedes 32-999021, for Port 32-864959, for Supersedes 32-999031 and for 99904Q (2 shorter hoses).
- For port and starboard trim/tilt cylinders. Daily maintenance of your boat. This kit can perfectly replace your old leaking, broken or corroded pipelines. Make your boat driving and traveling safer and more reliable.
- Package includes:Complete kit with all four hoses.
- At EnRand, we serious to offer the best products and services to customers. Provide friendly ,easy-to-reach support. Any question you have, please contact EnRand Support Team. We will get you back within 24 hours.
- See more on Amazon...
Brand: EnRand | Manufacturer: ENR
See On Amazon #10
F880 Rear Differential Cover Gasket Compatible with Ford 8.8 Axles
Asin: B0CR184JGJ | Ean: 0768637586822 | UPC: 768637586822
✔️Provides A Dry And Leak-Free Seal, Even When Exposed To High Horsepower, Differential And Axle Flex Or Wide Temperature Extremes..
✔️Package Included:1Pcs Differential Cover Gasket(Llr-F880).
✔️No Sealant Required! Don't Worry About Splitting During The Installation Process. It Has An Amazing Torque Retention Cover So That There Is No Sticking To The Housing.1,Make Sure That Both Surfaces Are Clean From Any Old Silicone Or Other Residues.2,Orient The Gasket Correctly And Bolt It Up..
✔️Premium Grade Metal Base Material With Rubber Coating,Unique Design Provides Superior Torque Retention For Cover Bolts..
Features
- Compatible with 1986-2014 Ford Mustang 8.8" rear end. (NOT FIT front or IRS rear).
- Premium grade metal base material with rubber coating,Unique design provides superior torque retention for cover bolts.
- Provides a dry and leak-free seal, even when exposed to high horsepower, differential and axle flex or wide temperature extremes.
- No Sealant Required! Don't worry about splitting during the installation process. It has an amazing torque retention cover so that there is no sticking to the housing.1,Make sure that both surfaces are clean from any old silicone or other residues.2,Orient the gasket correctly and bolt it up.
- Package Included:1Pcs Differential Cover Gasket(LLR-F880)
- See more on Amazon...
Brand: EnRand | Manufacturer: ENR
See On Amazon #11
EnRand Ford Fuel Rail Adapter,High Pressure Oil Rail Adapters Leak Test Kit for Ford 6.0L
Asin: B07D2MF1ZJ | Model: 13 | PartNumber: 13 | Ean: 0740931670865 | UPC: 740931670865
🛠️Allows Observation Of The High Pressure Oil System's Injector Control Pressure (Icp) By Direct Gauge Connection, And Facilitates Testing Of The High Pressure Oil System For Leaks Using Shop Air..
🛠️At Enrand, We Serious To Offer The Best Products And Services To Customers. Provide Friendly ,Easy-To-Reach Support. Any Question You Have, Please Contact Enrand Support Team. We Will Get You Back Within 24 Hours..
🛠️The Two Adapters Give You The Capability To Address Either Platform For Pressure Testing (Changed In 2004).
🛠️High Quality Cnc Machined From Billet Brass.
Features
- Pair of High Pressure Oil Rail Adapters which are needed to connect to the oil rail to test for leaks
- High Quality CNC Machined from Billet Brass
- Allows observation of the High Pressure Oil System's Injector Control Pressure (ICP) by direct gauge connection, and facilitates testing of the High Pressure Oil System for leaks using shop air.
- The two adapters give you the capability to address either platform for pressure testing (changed in 2004)
- At EnRand, we serious to offer the best products and services to customers. Provide friendly ,easy-to-reach support. Any question you have, please contact EnRand Support Team. We will get you back within 24 hours.
- See more on Amazon...
Brand: EnRand | Manufacturer: ENR
See On Amazon #12
Aluminum Alloy Paddle Shift Steering Wheel Shifter Extension for Honda Accord (Gen9 and Gen10),Honda Civic (Gen10),Honda Insight ZE4,Honda CR-V,Acura MDX-(Red)
Asin: B08Y81437R | Ean: 0782899254183 | UPC: 782899254183
🚗Metal Texture Adds A Sense Of Movement, So That Your Car Is No Longer Monotonous. Makes Your Car Look More Upmarket And Sporty.Please Still Press The Factory Shift Paddle Instead Of The Top Of This Product When You Use It..
🚗At Enrand, We Serious To Offer The Best Products And Services To Customers. Provide Friendly ,Easy-To-Reach Support. Any Question You Have, Please Contact Enrand Support Team. We Will Get You Back Within 24 Hours..
🚗Special Double-Side Tape Is Easy To Install And Will Not Cause Any Damage To The Car. No Residue After Take It Off.Package Include:1 Set Red Steering Wheel Paddle Shifter (Left & Right),Double-Side Tape X 2..
🚗Made Of High Quality Aluminum Alloy And Has A Bright Color To Enhance The Grade Of The Car..
Features
- Fit for Honda Accord (Gen9 and Gen10) 2014-up.for Honda Civic (Gen10) 2016-up.for Honda Insight ZE4 2019-up.for Honda CR-V 2017-up.for Acura MDX 2010-2013.
- Made of high quality aluminum alloy and has a bright color to enhance the grade of the car.
- Metal texture adds a sense of movement, so that your car is no longer monotonous. Makes your car look more upmarket and sporty.Please still press the factory shift paddle instead of the top of this product when you use it.
- Special double-side tape is easy to install and will not cause any damage to the car. No residue after take it off.Package include:1 set red steering wheel paddle shifter (left & right),double-side tape x 2.
- At EnRand, we serious to offer the best products and services to customers. Provide friendly ,easy-to-reach support. Any question you have, please contact EnRand Support Team. We will get you back within 24 hours.
- See more on Amazon...
Brand: EnRand | Manufacturer: ENR
Weight: 0.25 pounds
See On Amazon #13
EnRand Tail Light Cover Fits for Jeep Renegade, Black Anti-Oxidation Metal Taillight Rear Lamp Protector Guard Cover for Jeep Renegade 2015 2016 2017 2018 2019 2020 2021
Asin: B077MCKVS9 | Model: ENR-0201-01017 | PartNumber: ENR-0201-01017 | Ean: 0740931670582 | UPC: 740931670582
★Effectively Protects Your Tail Light From The Accidental Crash,Bump!Make Your Jeep Renegade Cool And More Awesome!.
★At Enrand, We Serious To Offer The Best Products And Services To Customers. Provide Friendly ,Easy-To-Reach Support. Any Question You Have, Please Contact Enrand Support Team. We Will Get You Back Within 24 Hours..
★Tail Light Guard Is Quite Easy For Installation With No Drilling Required. Attached With 3M Automotive Adhesive Tape With Super Adhesivity To Ensure It Fits Quite Tight And Nice..
★Made Of Superior Metal Material With Double Anti-Rust Black Coated Finish. Never Fade, Corrode Or Peel..
Features
- Greatly fits for 2015 2016 2017 2018 2019 2020 2021 Jeep Renegade.
- Made of superior metal material with double anti-rust black coated finish. Never fade, corrode or peel.
- Effectively protects your tail light from the accidental crash,bump!Make your jeep renegade cool and more awesome!
- Tail light guard is quite easy for installation with no drilling required. Attached with 3M automotive adhesive tape with super adhesivity to ensure it fits quite tight and nice.
- At EnRand, we serious to offer the best products and services to customers. Provide friendly ,easy-to-reach support. Any question you have, please contact EnRand Support Team. We will get you back within 24 hours.
- See more on Amazon...
Brand: EnRand | Manufacturer: ENR
Dimensions: 1.00 x 5.00 x 5.00 inches
Warranty: At EnRand, we serious to offer the best products and services to customers. Provide friendly ,easy-to-reach support. Any question you have, please contact EnRand Support Team. We will get you back within 24 hours.
See On Amazon #14
EnRand Bleeder Tee Kit Replacement for Seastar 3004.6439 HF4202 Fit for All Baystar Cylinders(2Pcs)
Asin: B0CSMPZK43 | Ean: 0768637588710 | UPC: 768637588710
✔️This Tool Is A Perfect Substitution For Seastar 3004.6439 Hf4202, Also Alternative To Oem Part Number Hc4645h And 800620, Engineered And Tested To Meet Or Exceed Original Part Standards And Performance..
✔️Bleeder Tee Has Thickened Body, Fine Thread, Triple Plated Chrom For Ultimate Corrosion Resistance.Hf4202 Bleeder Tee Kit Is Made Of Superior-Quality Steel And With Brass Nut Connector, Cnc Process Precision Manufacturing, Sturdy And Durable, Impact-Resistant, Corrosion-Resistant For Professional Level Reliability And Durability..
✔️Made With Premium Sturdy Carbon Steel, Impact Resistant And Anti Corrosion, Showing Stable Performance And Lasting Service Time.Ultra-Precision Design Meets The Requirements Of High Precision And Better Sealing And Provides Longer Service Life. Can Help You Complete The Repair Work Better..
Features
- Fit for SeaStar 3004.6439 HF4202 Steel Bleeder T-Fittings Bleeder Tee Kit Fit for all Baystar Cylinders.
- Made with premium sturdy carbon steel, impact resistant and anti corrosion, showing stable performance and lasting service time.Ultra-precision design meets the requirements of high precision and better sealing and provides longer service life. Can help you complete the repair work better.
- This tool is a perfect substitution for SeaStar 3004.6439 HF4202, also alternative to OEM part number HC4645H and 800620, engineered and tested to meet or exceed original part standards and performance.
- Bleeder Tee has Thickened body, fine thread, triple plated chrom for ultimate corrosion resistance.HF4202 Bleeder Tee kit is made of superior-quality steel and with brass nut connector, CNC process precision manufacturing, sturdy and durable, impact-resistant, corrosion-resistant for professional level reliability and durability.
- See more on Amazon...
Brand: EnRand | Manufacturer: ENR
Dimensions: 0.60 x 4.00 x 4.00 inches
See On Amazon #15
EnRand Hi Lift Jack Mount Hood Hinge/Door Hinge Bracket for Jeep Wrangler 2007-2022 JK JL Unlimited 2/4 Doors
Asin: B07FYL3WKS | Model: ENR-HJ-HigeBracket-JW | PartNumber: ENR-HJ-HigeBracket-JW | Ean: 0738596581879 | UPC: 738596581879
🚗Easily Install To Jeep Hood Hinge And Rear Door Hinge.Just Mounts To Existing Hood/Rear Door Hinge Holes,Not Need Any Drilling..
🚗At Enrand, We Serious To Offer The Best Products And Services To Customers. Provide Friendly ,Easy-To-Reach Support. Any Question You Have, Please Contact Enrand Support Team. We Will Get You Back Within 24 Hours..
🚗Package Included:Two Threaded Knobs To Tighten, And A Strap That Ties To The Jacks Handle To Eliminate Movement. All Mounting Hardware Is Included..
🚗Made Of Superior Structural Steel And Coated With Black Oxide Finish, Effective For Rust And Crack Resistance With Great Toughness..
Features
- Exclusively designed for Jeep Wrangler 2007-2022 JK JL unlimited 2/4 doors,Hi-Lift Jack Not Included.
- Made of superior structural steel and coated with black oxide finish, effective for rust and crack resistance with great toughness.
- Easily install to Jeep HOOD hinge and REAR DOOR hinge.Just Mounts to existing HOOD/REAR door hinge holes,Not need any drilling.
- Package included:Two threaded knobs to tighten, and a strap that ties to the jacks handle to eliminate movement. All mounting hardware is included.
- At EnRand, we serious to offer the best products and services to customers. Provide friendly ,easy-to-reach support. Any question you have, please contact EnRand Support Team. We will get you back within 24 hours.
- See more on Amazon...
Brand: EnRand | Manufacturer: ENR
See On Amazon #16
EnRand 12012 Water Pump Impeller Kit Fit For Chrysler Force 75 85 90 100 105 115 125 140 HP 1979-1989-Replaces Part # FK1069
Asin: B0CSNF99NF | Model: 12012, FK1069, F523065-1 | PartNumber: 12012, FK1069, F523065-1 | Ean: 0768637587997 | UPC: 768637587997
✔️Direct Replacement For Old Worn Water Pump Impeller For Chrysler And Force Outboard Motors. Ease Of Replacement Enables You To Cost-Effectively Fix Individual Components Without Having To Replace Entire Water Pump..
✔️Package Includes:Gasket (Oe: 37430/27-F523031); Disc Washer (Oe: 37510/F480388); Oil Seal (Oe: 85410/26-F351307); Impeller (Oe: 89450/47-F523065-1); Wear Plate (Oe: 12503/F523562); Grommet (Oe: 12835/Fa523735)..
✔️Replaces Oem Part Numbers Fk1069, F523065-1, Which Are Better Than Glm 12012 In Performance And Functionality..
✔️Our Water Pump Impeller Repair Kit Is Used To Repair/Rebuild The Water Pump Impeller For Chrysler & Force Outboard Motor, Makes Service Job More Easy And Convenient.Water Pump Impeller Kit For Chrysler And Force Outboard Motors That Have An Aluminum Water Pump Housing..
Features
- Water Pump Impeller kit fit for Force HP/Model: 85 hp (A B C E Models Only) 1983-1989; 125 hp 1983-1989. Also fit for Chrysler HP/Model: 75 hp 1981-1984; 85 hp 1980-1984; 90 hp 1983-1984; 100 hp 1979-1984; 105 hp 1982-1983; 115 hp 1979-1984; 125 hp 1981-1982; 140 hp 1979-1984.
- Our water pump impeller repair kit is used to repair/rebuild the water pump impeller for Chrysler & Force outboard motor, makes service job more easy and convenient.Water Pump Impeller kit for Chrysler and Force Outboard motors that have an aluminum water pump housing.
- Direct replacement for old worn water pump impeller for Chrysler and Force Outboard motors. Ease of replacement enables you to cost-effectively fix individual components without having to replace entire water pump.
- Replaces OEM Part Numbers FK1069, F523065-1, which are better than GLM 12012 in performance and functionality.
- Package Includes:Gasket (OE: 37430/27-F523031); Disc Washer (OE: 37510/F480388); Oil Seal (OE: 85410/26-F351307); Impeller (OE: 89450/47-F523065-1); Wear Plate (OE: 12503/F523562); Grommet (OE: 12835/FA523735).
- See more on Amazon...
Brand: EnRand | Manufacturer: ENR
See On Amazon #17
D044 Differential Cover Gasket Compatible with Dana 44
Asin: B0CR189GHR | Ean: 0768637587096 | UPC: 768637587096
✔️Provides A Dry And Leak-Free Seal, Even When Exposed To High Horsepower, Differential And Axle Flex Or Wide Temperature Extremes..
✔️Package Included:1Pcs Differential Cover Gasket(Llr-D044).
✔️No Sealant Required! Don't Worry About Splitting During The Installation Process. It Has An Amazing Torque Retention Cover So That There Is No Sticking To The Housing.1,Make Sure That Both Surfaces Are Clean From Any Old Silicone Or Other Residues.2,Orient The Gasket Correctly And Bolt It Up..
✔️Premium Grade Metal Base Material With Rubber Coating,Unique Design Provides Superior Torque Retention For Cover Bolts..
Features
- Compatible with all Dana 44 Front and Rear Axles (EXCEPT 1983-1984 Vacuum Disconnect Front Axles),Replacement for 1963-1982 Wagoneer,Replacement for 1984-1991 Grand Wagoneer,Replacement for 1974-1982 Cherokee,Replacement for1963-1982 J-trucks,Replacement for1985-1988 J-trucks.
- Premium grade metal base material with rubber coating,Unique design provides superior torque retention for cover bolts.
- Provides a dry and leak-free seal, even when exposed to high horsepower, differential and axle flex or wide temperature extremes.
- No Sealant Required! Don't worry about splitting during the installation process. It has an amazing torque retention cover so that there is no sticking to the housing.1,Make sure that both surfaces are clean from any old silicone or other residues.2,Orient the gasket correctly and bolt it up.
- Package Included:1Pcs Differential Cover Gasket(LLR-D044)
- See more on Amazon...
Brand: EnRand | Manufacturer: ENR
See On Amazon #18
EnRand 13260 Fuel Line Disconnect Tool Set - Straight and Bent Wrenches for Cumminss ISB and ISX
Asin: B0CSMP6LKL | Model: FLT-13260 | PartNumber: FLT-13260 | Ean: 0768637588536 | UPC: 768637588536
✔️Made Form High Standard Carbon Steel Which Can Withstand Corrosion, Rust And Impact, With Black Finish, Ensures An Unparalleled Long Lifespan. Heat Shrink On The Wrench-End Enhance The Friction, Make The Tool Not Easy To Fall And Protect The Hand From Injury..
✔️Package Include: This 13260 Measures 250" Thickness And Includes One Bent Tool And One Straight Tool For Versatility When Servicing Cummins Engines..
✔️Used To Disconnect The Low-Pressure Fuel Rail Supply Line From The Fuel Rail And Release A Large 0.918" Voss Type Diesel Fuel Line Connector. Help Reduce Voss Connector Damage And Providing Full Release Of The Connector Clamps..
Features
- Fit for Cummins ISB, ISX engines which equipped VOSS Type low pressure fuel line connectors. This Straight and Bent wrench tool set is designed to release the fuel line connectors on the CUMMINS ISB, ISX engine family.
- Used to disconnect the low-pressure fuel rail supply line from the fuel rail and release a large 0.918 VOSS type diesel fuel line connector. Help reduce VOSS connector damage and providing full release of the connector clamps.
- Made form high standard carbon steel which can withstand corrosion, rust and impact, with black finish, ensures an unparalleled long lifespan. Heat shrink on the wrench-end enhance the friction, make the tool not easy to fall and protect the hand from injury.
- Package include: This 13260 measures 250 thickness and includes one bent tool and one straight tool for versatility when servicing CUMMINS engines.
- See more on Amazon...
Brand: EnRand | Manufacturer: ENR
Weight: 0.50 pounds
See On Amazon #19
EnRand GM LS Harmonic Balancer Install Tool Pulley Installation Compatible with GM 1997-Up LS1 LS Engines
Asin: B07DMZ24NS | Model: 13 | PartNumber: 13 | Ean: 0740931670308 | UPC: 740931670308
🛠️Made Of Hardened Structural Steel(Grade 10.9 Steel), Galvanized Steel Nuts And Aluminum Washers..
🛠️At Enrand, We Serious To Offer The Best Products And Services To Customers. Provide Friendly ,Easy-To-Reach Support. Any Question You Have, Please Contact Enrand Support Team. We Will Get You Back Within 24 Hours..
🛠️Package Included: 1Pcs Threaded Rod & 1Pcs Nut & 2Pcs Washers.
🛠️Work For Installing The Harmonic Balancer On Camaro, Corvette, Trans Am, Gto, G8, Ls Truck, Or Ls Powered Street Rod.Threads Into Crankshaft And Pushes The Crankshaft Pulley Into Position.Long Enough To Fully Thread Into Your Crank And Still Use A Regular Deep Well Socket To Run It Up..
Features
- Fits GM 1997-Up LS1 LS Engines
- Work for installing the harmonic balancer on Camaro, Corvette, Trans Am, GTO, G8, LS Truck, or LS powered street rod.Threads into crankshaft and pushes the crankshaft pulley into position.long enough to fully thread into your crank and still use a regular deep well socket to run it up.
- Made of hardened structural steel(grade 10.9 steel), galvanized steel nuts and aluminum washers.
- Package included: 1pcs Threaded Rod & 1pcs Nut & 2pcs Washers
- At EnRand, we serious to offer the best products and services to customers. Provide friendly ,easy-to-reach support. Any question you have, please contact EnRand Support Team. We will get you back within 24 hours.
- See more on Amazon...
Brand: EnRand | Manufacturer: ENR
Dimensions: 0.79 x 3.15 x 7.87 inches | Weight: 0.30 pounds
See On Amazon #20
EnRand Oil Filter Socket Hand Wrench Tool Set fit for Toyota,Compatible with Lexus Vehicles,Includes 2pcs 64mm 14 Flute Oil Filter Wrench for 1.8L and 2.0L-5.7L Engines
Asin: B08355T8D2 | Model: ENR_OTL_125 | PartNumber: ENR_OTL_125 | Ean: 0782899253506 | UPC: 782899253506
⚙️901-L : Fit For Toyota Avalon Camry Highlander Rav4 Sienna Venza 4-Runner Tundra Fj Cruiser Sequoia Land Cruiser,Compatible With Lexus ,2.5L To 5.7L Engines With 64Mm Cartridge Style Filter Housin,Multiple Contact Points Engage The Housing Cap Securely, Engages Both The Teeth On The Oil Filter Housing, And Also The 64Mm Ring On The Top Of The Oil Filter Housing,24Mm X 64.5 Mm With 14 Fultes For A Snug No-Play, No-Slip Fit,Allow Easy Removal..
⚙️901-C :Multiple Contact Points Engage The Housing Cap Securely, Engages Both The Teeth On The Oil Filter Housing, And Also The 64Mm Ring On The Top Of The Oil Filter Housing.Allow Easy Removal 5 Does Not Work On Traditional Oil Filters That You Unscrew And Dispose Of..
⚙️901-C :Fits For Oil Filter Cap Of Toyota,Compatible With Lexus Specially.1.8 Liter 4-Cylinder Engines In The Toyota Prius, Prius V, Corolla, Matrix, Scion Xd And Iq ,Compatible With Lexus Ct200h,That Have The Cartridge Style Filter System..
⚙️Constructed Of Heat-Treated Chrome Vanadium Steel Which Has A Higher Strength Than Normal Materials To Avoid Cracking Or Damaging The Cap.Complete Rust And Corrosion Resistance With Fully Polished, Chrome Plated Mirror Finish,Oem Design..
Features
- Package Included : 1x EnRand 901-L Oil Filter Wrench & 1x EnRand 901-C Oil Filter Wrench.
- Constructed of heat-treated chrome vanadium steel which has a higher strength than normal materials to avoid cracking or damaging the cap.Complete rust and corrosion resistance with fully polished, Chrome plated mirror finish,OEM design.
- 901-L : Fit for Toyota Avalon Camry Highlander RAV4 Sienna Venza 4-Runner Tundra Fj Cruiser Sequoia Land Cruiser,Compatible with Lexus ,2.5L To 5.7L Engines With 64mm Cartridge Style Filter Housin,Multiple Contact Points Engage The Housing Cap Securely, Engages Both The Teeth On The Oil Filter Housing, And Also The 64mm Ring On The Top of The Oil Filter Housing,24mm x 64.5 mm with 14 Fultes for A Snug No-Play, No-Slip Fit,Allow Easy Removal.
- 901-C :Fits for Oil Filter Cap of TOYOTA,Compatible with Lexus Specially.1.8 liter 4-cylinder Engines In The Toyota Prius, Prius V, Corolla, Matrix, Scion xD and iQ ,Compatible with Lexus CT200h,That Have The Cartridge Style Filter System.
- 901-C :Multiple Contact Points Engage The Housing Cap Securely, Engages Both The Teeth On The Oil Filter Housing, And Also The 64mm Ring On The Top of The Oil Filter Housing.Allow Easy Removal 5 Does Not Work On Traditional Oil Filters That You Unscrew And Dispose Of.
- See more on Amazon...
Brand: EnRand | Manufacturer: ENR
Dimensions: 2.00 x 3.00 x 4.00 inches | Weight: 0.94 pounds
See On Amazon #21
EnRand 9U-6891 Injector Sleeve Remover Installer Set+9U-7227 Injector Height Tool+J-38587-a Engine Barring Socket for CAT Caterpillar 3406E C-15 C-16 Engines (8 PCS)
Asin: B08357CVMP | Model: ENR-9U-6891-7227 | PartNumber: ENR-9U-6891-7227 | Ean: 0782899253599 | UPC: 782899253599
✔️Injector Height Tool:Diesel Engine Injector Timing Fixture For Caterpiller 3406E, C-15 And C-16..
✔️9U-6891 Injector Sleeve Remover Installer Set Made Of High Quality Steel With Resisting Rust And Corrosion, Strong In Use. The 128-7889 Puller Bridge Can Be Used On All Three Engines..
✔️The Engine Barring/Rotating Tool Makes The Job Easy,Needn't To Manually Rotate An Engine.Just Insert The Tool Into The Flywheel Housing Until It Engages The Ring Gear, Then Attach A 1/2-Inch Square Drive Ratchet Or Breaker Bar And Turn.Put The The Injector Height Tool On The Injector To Accurately Adjust The Injector Height Of The Engine..
✔️The Engine Barring/Rotating Tool Made Of High Quality-42Crmo Steel..
✔️The Injector Height Tool Made Of High Quality Aluminum Alloy With Red Powder Finish..
✔️9U-6891 Injector Sleeve Remover Installer Set:Work On Caterpiller 3406E C10 C12 C15 C-16 And C-18 On-Highway Engines. Like C-12 1Yn, C-10 2Pn, 3406E 5Ek, 3406E 6Br And 3406E 9Wr..
✔️9U-6891 Injector Sleeve Remover Installer Set Exclusively Designed Easy To Remove And Install The Injector Sleeve. Senr6421, 3406E Disassembly And Assembly. Senr1002, C-10 Disassembly And Assembly And Senr1007, C-12 Disassembly And Assembly.Instruction Included..
✔️Engine Barring/Rotating Tool: Works On Caterpillar(Cat) Engines 3200/3406 Series C13/C15/C16/3208/3400/3406E/3508/3512/3500 Eui/Mui Engines,Mack E7/E-7 Etec Engine And So On..
Features
- Package included: 1pc Engine Barring/Rotating Tool & 1pc Injector Height Tool (3 in 1) 1pc 9U-6891 Injector Sleeve Remover Installer Set(6 in 1).
- Engine Barring/Rotating Tool: Works on Caterpillar(CAT) engines 3200/3406 series C13/C15/C16/3208/3400/3406e/3508/3512/3500 EUI/MUI engines,Mack E7/E-7 ETEC Engine and so on.
- Injector Height Tool:Diesel Engine Injector Timing Fixture for Caterpiller 3406E, C-15 and C-16.
- 9U-6891 Injector Sleeve Remover Installer Set:Work on Caterpiller 3406E C10 C12 C15 C-16 and C-18 On-highway Engines. Like C-12 1YN, C-10 2PN, 3406E 5EK, 3406E 6BR and 3406E 9WR.
- The Engine Barring/Rotating Tool Made of high quality-42CrMo Steel.
- The Injector Height Tool Made of high quality Aluminum Alloy with Red Powder Finish.
- 9U-6891 Injector Sleeve Remover Installer Set Made of high quality steel with resisting rust and corrosion, strong in use. The 128-7889 Puller Bridge can be used on all three engines.
- The Engine Barring/Rotating Tool makes the job easy,Needn't to manually rotate an engine.Just insert the tool into the flywheel housing until it engages the ring gear, then attach a 1/2-Inch square drive ratchet or breaker bar and turn.Put the The Injector Height Tool on the injector to accurately adjust the Injector Height of the engine.
- 9U-6891 Injector Sleeve Remover Installer Set Exclusively designed Easy to Remove and Install the Injector Sleeve. SENR6421, 3406E Disassembly and Assembly. SENR1002, C-10 Disassembly and Assembly and SENR1007, C-12 Disassembly and Assembly.Instruction included.
- See more on Amazon...
Brand: EnRand | Manufacturer: ENR
See On Amazon #22
SV08-40-0-N-00 Spool Valve 4-Way, 3000 PSI, 3 GPM Fit for VC08-4 Cavity Size 08 (1/2 Hole) Solenoids
Asin: B0C634NTNB | Model: SV08-40-0-N-00 | PartNumber: SV08-40-0-N-00 | Ean: 0768637581063 | UPC: 768637581063
🚜2 Position, 4-Way Electromagnetic Directional Valve Made Of High-Quality Steel Has A Longer Service Life After Precise Manufacturing And Testing.With Continuous-Duty Rated Coil, All Ports May Be Fully Pressurized. Coil Voltage And Termination Are Optional. 4 Gpm Max Flow & 3000 Psi Rated..
🚜When De-Energized, The Sv08-40-0-N-00 Flow Paths Are Port 3 To Port 2, And Port 4 To Port 1. When Energized, The Valve's Spool Shifts To Open Port 3 To Port 4, And Port 2 To Port 1. All Ports Are Open At Crossover..
🚜Unitized, Molded Coil Design. Rated Coil Achieve Continuous Work. Continuous From 85% To 115% Of Nominal Voltage..
🚜This Solenoid Operated Spool Cartridge Valve Is Made Of Latest Upgraded Materials With Sturdiness And Durability Performance, High Efficiency, Dust-Proof, Waterproof, Continuous-Duty Solenoid For Longer Service Life..
Features
- Directly replace part for SV08-40-0-N-00.Fit for VC08-4 Cavity, uses for Size 08 (1/2 Hole) Solenoids
- This solenoid operated spool cartridge valve is made of latest upgraded materials with sturdiness and durability performance, high efficiency, dust-proof, waterproof, continuous-duty solenoid for longer service life.
- 2 Position, 4-way electromagnetic directional valve made of high-quality steel has a longer service life after precise manufacturing and testing.With continuous-duty rated coil, all ports may be fully pressurized. Coil voltage and termination are optional. 4 GPM max Flow & 3000 PSI Rated.
- Unitized, molded coil design. Rated coil achieve continuous work. Continuous from 85% to 115% of nominal voltage.
- When de-energized, the SV08-40-0-N-00 flow paths are port 3 to port 2, and port 4 to port 1. When energized, the valve's spool shifts to open port 3 to port 4, and port 2 to port 1. All ports are open at crossover.
- See more on Amazon...
Brand: EnRand | Manufacturer: ENR
Dimensions: 0.80 x 5.00 x 3.00 inches
See On Amazon #23
EnRand Flywheel Puller Tool for Mercury Yamaha Outboards
Asin: B091PR4MRX | Ean: 0782899254329 | UPC: 782899254329
🚤Necessary For Removing Flywheel To Replace A Stator..
At Enrand, We Serious To Offer The Best Products And Services To Customers. Provide Friendly ,Easy-To-Reach Support. Any Question You Have, Please Contact Enrand Support Team. We Will Get You Back Within 24 Hours..
🚤Equivalent Mercury Factory Part Number: 91-849154T1 And Amt0023..
🚤Made Of Premium Hardened Steel With Ball Bearing Head For Smooth Powerful Operation.High Strength Steel,Zero Friction Ball Bearing Head..
Features
- Flywheel Puller for Mercury Outboards,Fit for Non Verado Mercury (1.5"x16) and Yamaha Outboards.
- Made of premium Hardened Steel with Ball Bearing Head for Smooth Powerful Operation.High Strength Steel,Zero Friction Ball Bearing Head.
- Necessary for removing flywheel to replace a stator.
- Equivalent Mercury Factory Part number: 91-849154T1 and AMT0023.
- At EnRand, we serious to offer the best products and services to customers. Provide friendly ,easy-to-reach support. Any question you have, please contact EnRand Support Team. We will get you back within 24 hours.
- See more on Amazon...
Brand: EnRand | Manufacturer: ENR
See On Amazon #24
EnRand Center Console Armrest Pad Cover for Dodge Ram 1500 2500 3500 4500 5500 Pickup Trucks 1993-2020-Black Soft Car Armrest Protector Cushion All Seasons Suitable(Black)
Asin: B08LCK712M | Model: CC-DD-B | PartNumber: CC-DD-B | Ean: 0782899253858 | UPC: 782899253858
🚗Constructed Of Heavy Duty Neoprene (Wet Suit Material) With An Added Layer Of Padding For The Arm Rest.🐶.
🚗At Enrand, We Serious To Offer The Best Products And Services To Customers. Provide Friendly ,Easy-To-Reach Support. Any Question You Have, Please Contact Enrand Support Team. We Will Get You Back Within 24 Hours.🐶.
🚗Easy Installation With An Elastic Band; No Drilling Or Tools Required. Great Fit And Function,Tight Fit &Nice.🐶.
🚗Providing Added Arm Rest Protection From Pet Claws, Dirt And Sticky Fingers, You No Longer Need To Pile Hand Towels To Keep The Center Console Looking New, This Cover Will Make The Most Impressive Interior Upgrade "Look" To Your Dodge Ram.🐶.
Features
- Exclusively designed fits for Dodge Ram 1500 2500 3500 4500 5500 Pickup Trucks 1993-2019.
- Providing added arm rest protection from pet claws, dirt and sticky fingers, you no longer need to pile hand towels to keep the center console looking new, this cover will make the most impressive interior upgrade look to your Dodge Ram.
- Constructed of heavy duty neoprene (wet suit material) with an added layer of padding for the arm rest.
- Easy Installation with an elastic band; No drilling or tools required. Great fit and function,tight fit &nice.
- At EnRand, we serious to offer the best products and services to customers. Provide friendly ,easy-to-reach support. Any question you have, please contact EnRand Support Team. We will get you back within 24 hours.
- See more on Amazon...
Brand: EnRand | Manufacturer: ENR
See On Amazon #25
EnRand Boost Controller Adjustable Elbow for Dodge Cummins HY35W HX35W HX40W Turbocharger& Billet 2095 Rack Cap for P7100 injection pump 1994-1998 Dodge Cummins Diesel Engines
Asin: B0CSLRCJ77 | Model: HY35W HX35W HX40W | PartNumber: HY35W HX35W HX40W | Ean: 0768637587270 | UPC: 768637587270
✔️The Rack Cap Suitable For Bosch All P7100 Injection Pump And For Dodge Cummins 1994-1998 Diesel Engines; P7100 Rack Plug Is Drilled To 17Mm, Which Is 4Mm Deeper Than A Stock Rack Cap. This Allows For Full 21Mm Of Possible Rack Travel Which Provides More Fuel Flow, Equating To 20+ More Hp..
✔️Machined From Billet Aluminum Rack Cap & Quality Brass Boost Elbow. Very Tight Tolerances For A Perfect Fit..
✔️The Rack Cap Helps Increase Your Rack Travel By Drilling Deeper Than The Factory Cap For More Fueling On Your P7100 Pump..
✔️The Adjustable Boost Elbow Could Adjust To Increase Or Decrease Boost Pressures On Your Turbo To Above The 21Psi Stock Setting And Up To 35Psi Or More. More Boost Will Bring More Power! Raising Your Boost - The Turbo Sends More Air Into The Engine - Extra Fuel Burns..
Features
- The Adjustable Boost Elbow work for Holset HX35W HX40W and HY35W turbos commonly found for Dodge Ram Diesel 2500 & 3500 , 1994-2004.Thread size is 1/8 pipe, and "screwed absolutely right" for 95 Cummins 5.9L, every single piece is well QC beyond othersUse Teflon Tape to make a seal with the highest quality.
- The Adjustable Boost Elbow could adjust to increase or decrease boost pressures on your turbo to above the 21psi stock setting and up to 35psi or more. More Boost will bring more power! Raising your boost - the turbo sends more air into the engine - extra fuel burns.
- The Rack Cap suitable for Bosch all P7100 injection pump and for Dodge Cummins 1994-1998 Diesel Engines; P7100 rack plug is drilled to 17mm, which is 4mm deeper than a stock rack cap. This allows for full 21mm of possible rack travel which provides more fuel flow, equating to 20+ more HP.
- The Rack Cap helps Increase your rack travel by drilling deeper than the factory cap for more fueling on your P7100 pump.
- Machined from Billet aluminum Rack Cap & Quality Brass Boost Elbow. Very tight tolerances for a perfect fit.
- See more on Amazon...
Brand: EnRand | Manufacturer: ENR
See On Amazon #26
EnRand Jeep Renegade Gas Tank Cover,Aluminum Exterior Accessories,Fuel Filler Gas Cap Cover for Jeep Renegade Models(2014-2021)
Asin: B07DN26TZJ | Ean: 0740931670292 | UPC: 740931670292
🚗Used Sophisticated Matte Effects Processing And Made Of High Standard Aluminum With Black Coated Finish. Easily Repaint With Your Favorite Color!.
🚗At Enrand, We Serious To Offer The Best Products And Services To Customers. Provide Friendly ,Easy-To-Reach Support. Any Question You Have, Please Contact Enrand Support Team. We Will Get You Back Within 24 Hours..
🚗No Drilling Or Cutting Required And The 3M Automotive Adhesive Tape Is Attached For Easy Installation..
🚗A Rock Pattern Was Designed And Casted In The Center Of The Cover,Made In A Iso9002 Factory..
Features
- Custom Designed to fit Jeep Regegade 2014 2015 2016 2017 2018 2019 2020 2021.
- A rock pattern was designed and casted in the center of the cover,Made in a ISO9002 Factory.
- Used sophisticated matte effects processing and made of high standard Aluminum with black coated finish. Easily repaint with your favorite color!
- No drilling or cutting required and the 3M automotive adhesive tape is attached for easy installation.
- At EnRand, we serious to offer the best products and services to customers. Provide friendly ,easy-to-reach support. Any question you have, please contact EnRand Support Team. We will get you back within 24 hours.
- See more on Amazon...
Brand: EnRand | Manufacturer: ENR
Weight: 0.20 pounds
Warranty: At EnRand, we serious to offer the best products and services to customers. Provide friendly ,easy-to-reach support. Any question you have, please contact EnRand Support Team. We will get you back within 24 hours.
See On Amazon #27
EnRand RV Toilet Flange Seal Mounting Hardware Kit,Toilet Seal,Toilet Gasket Replacement Compatible for Dometic 300 310 320 Series, Replace Part Number 385311652 385311653
Asin: B0BV23JY14 | Model: 385311652 | PartNumber: 385311652 | Ean: 0768637579268 | UPC: 768637579268
Rv Toilet Replacement Seals Are Made Of High-Quality Rubber Compounds, Which Ensure That The Gaskets Will Not Deform Or Even Crack Due To Long-Term Aging, And Have A Long Service Life..
At Enrand, We Serious To Offer The Best Products And Services To Customers. Provide Friendly ,Easy-To-Reach Support. Any Question You Have, Please Contact Enrand Support Team. We Will Get You Back Within 24 Hours..
Easy To Install, Remove The Old Seal, Clean The Surrounding Area And Replace With A New Seal, Secure The Toilet With The Provided T-Screw, Washer, Nut, And Finally Put The Bolt Cover On. There Will Be More Detailed Instructions In The Picture And Details Page..
The Product Is Divided Into Two Parts, The Black Sealing Ring Helps You Solve The Problem Of Toilet Leakage And Peculiar Smell Caused By The Damage Of The Original Sealing Ring Of The Toilet. T-Screw And Washer, Nut And Bolt Cover Help You Replace Toilet Mounting Hardware And Make Toilet More Stable..
Features
- Fits All 300 Series Toilets,Perfect compatible 320, 310, 300 Models RV, motorhome, and trailer toilets, These flush ball seals Perfect replace 385311658 Models Flush Ball Seal Kit.Does Not Fit 210, 510 Models Including models not listed.
- The product is divided into two parts, the black sealing ring helps you solve the problem of toilet leakage and peculiar smell caused by the damage of the original sealing ring of the toilet. T-screw and washer, nut and bolt cover help you replace toilet mounting hardware and make toilet more stable.
- RV toilet replacement seals are made of high-quality rubber compounds, which ensure that the gaskets will not deform or even crack due to long-term aging, and have a long service life.
- Easy to install, remove the old seal, clean the surrounding area and replace with a new seal, secure the toilet with the provided T-screw, washer, nut, and finally put the bolt cover on. There will be more detailed instructions in the picture and details page.
- At EnRand, we serious to offer the best products and services to customers. Provide friendly ,easy-to-reach support. Any question you have, please contact EnRand Support Team. We will get you back within 24 hours.
- See more on Amazon...
Brand: EnRand | Manufacturer: ENR
Dimensions: 0.50 x 4.80 x 4.80 inches
See On Amazon #28
Door Hinge Nuts for Jeep Wrangler JK JKU Sports Sahara Freedom Rubicon 2/4-Door 2007 to 2020 (8 Pcs Black)
Asin: B0977FBK7Z | Ean: 0782899254381 | UPC: 782899254381
🚗Make Your Doors Go On / Off Easily And Open / Shut Very Smoothly, Best Replacement For Your Old Rusted Hinge Nut..
🚗At Enrand, We Serious To Offer The Best Products And Services To Customers. Provide Friendly ,Easy-To-Reach Support. Any Question You Have, Please Contact Enrand Support Team. We Will Get You Back Within 24 Hours..
🚗Easy Installation, Remove Your Old Corroded Door Hinge Nuts Using Driver Socket Or Bit And Replace With Our New Door Hinge Lock..
🚗Made Of Premium Grade Heavy Duty Integral Steel Structure With Black Anodized Coating, Durability, Anti-Corrosion And Anti-Rust, High Temperature And Impact Resistance To Provide A Much Longer Service Life.🎁Package Included : A Set Of 8Pcs Door Hinge Nuts..
Features
- Greatly fits for Jeep Wrangler JK,JKU, Sports, Sahara, Freedom, Rubicon, Unlimited 2-Door&4-Door 2007-2020.
- Made of Premium grade heavy duty integral steel structure with black anodized coating, durability, anti-corrosion and anti-rust, high temperature and impact resistance to provide a much longer service life. Package Included : A Set of 8pcs Door Hinge Nuts.
- Make your doors go on / off easily and open / shut very smoothly, best replacement for your old rusted hinge nut.
- Easy installation, Remove your old corroded door hinge nuts using driver socket or bit and replace with our new door hinge lock.
- At EnRand, we serious to offer the best products and services to customers. Provide friendly ,easy-to-reach support. Any question you have, please contact EnRand Support Team. We will get you back within 24 hours.
- See more on Amazon...
Brand: EnRand | Manufacturer: ENR
Dimensions: 0.40 x 1.90 x 3.50 inches | Weight: 0.31 pounds
See On Amazon #29
EnRand JK Front Turn Signal Light Guard Cover Compatible with 2007-2018 Jeep Wrangler JK & Unlimited - Pair
Asin: B0BGHCW2S6 | Model: jeep wrangler jk | PartNumber: jeep wrangler jk | Ean: 0768637578094 | UPC: 768637578094
Features:Protect Your Vehicle Front Turn Signals And Comes In A Stylish Classic Five Star Aluminium Alloy Shape That Is Both Scratch And Weather Resistant..
At Enrand, We Serious To Offer The Best Products And Services To Customers. Provide Friendly ,Easy-To-Reach Support. Any Question You Have, Please Contact Enrand Support Team. We Will Get You Back Within 24 Hours..
Easy Installation, With Strongly 3M Adhesive Tape, The Signal Light Cover Guard Fits Directly Over Your Existing Signals Lens..
Material:Made Of High Quality Aluminium Alloy. Never Fade, Corrode Or Peel..
Features
- Fitment:Greatly fits for Jeep JK Wrangler & Wrangler Unlimited 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018.
- Material:Made of High quality Aluminium Alloy. Never fade, corrode or peel.
- Features:protect your vehicle front turn signals and comes in a stylish classic Five Star Aluminium Alloy Shape that is both scratch and weather resistant.
- Easy installation, With Strongly 3m adhesive tape, the Signal Light Cover Guard fits directly over your existing signals lens.
- At EnRand, we serious to offer the best products and services to customers. Provide friendly ,easy-to-reach support. Any question you have, please contact EnRand Support Team. We will get you back within 24 hours.
- See more on Amazon...
Brand: EnRand | Manufacturer: ENR
See On Amazon #30
EnRand GM LS Valve Spring Tool,Valve Spring Compressor Tool for GM Based LS Engines LS1 LS2 LS3 LS4 LS6 LS7 LS9 LSA LQ4 LQ9 and LSX Engine
Asin: B07FYPSH7M | Model: ENR-VSPT-GM | PartNumber: ENR-VSPT-GM | Ean: 0738596581886 | UPC: 738596581886
🛠️Gm Ls Series Valve Spring Compressor Tool Works By Using Compressed Air In The Cylinder At Tdc, Allowing Valve Springs Or Seals Changes Without Removing The Cylinder Heads..
🛠️At Enrand, We Serious To Offer The Best Products And Services To Customers. Provide Friendly ,Easy-To-Reach Support. Any Question You Have, Please Contact Enrand Support Team. We Will Get You Back Within 24 Hours..
🛠️Packed Included One Cnc Plasma Cut 3/16 Steel Plate, One B7 High Strength Stud, Two High Strength Nuts And Two Washers..
🛠️Made Of Heavy Duty 3/16 Thick Steel Plate And B7 Grade Hardware With Strong Durability..
Features
- Works for GM based LS engines: LS1 LS2 LS3 LS4 LS6 LS7 LS9, LSA, LQ4, LQ9 and LSX engine.
- Made of heavy duty 3/16 thick steel plate and B7 grade hardware with strong durability.
- GM LS series valve spring compressor tool works by using compressed air in the cylinder at TDC, allowing valve springs or seals changes without removing the cylinder heads.
- Packed included one CNC plasma cut 3/16 steel plate, one B7 high strength stud, two high strength nuts and two washers.
- At EnRand, we serious to offer the best products and services to customers. Provide friendly ,easy-to-reach support. Any question you have, please contact EnRand Support Team. We will get you back within 24 hours.
- See more on Amazon...
Brand: EnRand | Manufacturer: ENR
See On Amazon