FLARING - Buying Guide
Last Updated: 05/11/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
FLARING FC650DL Plasma Cutter, 65 Amp Non-Touch Pilot Arc Plasma Cutter Machine, 5/8 inch Clean Cut 3/4 inch Severance Cut, Dual Voltage 110/120V or 220/240V with Consumable Set Digital Display
Asin: B0CT4PVGQH | Model: FC650DL | PartNumber: FC650DL
【Voltage Transfer】 The Power Cord Plug Installed On The Machine Is A 110V Us Standard Plug. A Conversion Cord Is Included To Easily Convert 110V To 220V Or 120V To 240V For Use In Your Home, Shop, Or Factory. 30A Circuit Breakers Are Recommended For 220V And 60A Circuit Breakers Are Recommended For 110V..
【Warranty Trusted Fromr Flaring】Flaring Offer A 30 Day Money-Back Guarantee And 1-Year New Replacement Warranty Covered By Our Us Based Lifetime Technical Support. To Avail The Warranty, Please Contact Online To Activate The Warranty When You Receive The Goods..
【Portable And Easy To Use】This Plasma Cutter Machine Only Weighs 9 Pounds, Easy To Carry. The Pre-Installed Quick Air Coupling, Only Takes 30 Seconds And You Can Start Cutting. Significantly Save Your Preparation Time..
【Package Includes】 Fc650dl Plasma Cutter Machine, Upgrade Plasma Cutting Torch Ag60, Ground Clamp, Air Filter Regulator, Air Hose, Consumables, Instruction Manual Etc..
【Powerful Cutting Performance】Automatic Dual-Voltage 120/240V. With Advanced Igbt Inverter Technology, 10-60A Dc Output, 5/8” Ideal Clean Cut And 3/4” Maximum Severance Cut Under 220/240V. 10-35A Dc Output, 3/8" Ideal Clean Cut And 1/2" Maximum Severance Cut Under 110/120V. Suitable Cutting For Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, Etc. Uses Non-Hazardous Compressed Air To Cut, Safe And At Low Cost..
Features
- 65A NON-TOUCH PILOT ARC PLASMA CUTTER Effortlessly cuts through rough, painted, and rusty surfaces while generating minimal slag. The pilot arc technology enables cutting without direct contact between the tip and the metal, resulting in improved cutting quality and extended consumable lifespan.
- POWERFUL CUTTING PERFORMANCE Automatic dual-voltage 120/240V. With advanced IGBT inverter technology, 10-60A DC output, 5/8 ideal clean cut and 3/4 maximum severance cut under 220/240V. 10-35A DC output, 3/8 ideal clean cut and 1/2 maximum severance cut under 110/120V. SUITABLE CUTTING for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. Uses non-hazardous compressed air to cut, safe and at low cost.
- VOLTAGE TRANSFER The power cord plug installed on the machine is a 110V US standard plug. A conversion cord is included to easily convert 110V to 220V or 120V to 240V for use in your home, shop, or factory. 30A circuit breakers are recommended for 220V and 60A circuit breakers are recommended for 110V.
- PACKAGE INCLUDES FC650DL plasma cutter machine, upgrade plasma cutting torch AG60, ground clamp, air filter regulator, air hose, consumables, instruction manual etc.
- WARRANTY TRUSTED FROMR FLARING FLARING offer a 30 day money-back guarantee and 1-year new replacement warranty covered by our US based lifetime technical support. To avail the warranty, please contact online to activate the warranty when you receive the goods.
- PORTABLE AND EASY TO USE This plasma cutter machine only weighs 9 pounds, easy to carry. The pre-installed quick air coupling, only takes 30 seconds and you can start cutting. Significantly save your preparation time.
- See more on Amazon...
Brand: FLARING | Manufacturer: FLARING
See On Amazon #2
FLARING MIG Welder, 215Amp LED Digital Display Synergic MIG 120V/240V Dual Voltage, 6 in 1 Gas MIG/Gasless Flux Core MIG/Stick/Lift TIG/Spot welding/Spool Gun Multi Process Welding Machine
Asin: B0CBPF31T3 | Model: FM215D | PartNumber: FM215D
🛒【One-Button Selection】Smart Control Panel Allows You To Easily Monitor And Adjust Welding Parameters, Such As The Welding Mode, Welding Wire Thickness, Voltage, Current, And Type Of Gas. Stay In Control And Achieve Precise Results. Especially In Mig Mode, It Is Recommended To Use The Three Modes Already Set Up, Mig Gas Dcep (.030"/0.8Mm) Solid Wire, Mig Gasless Dcen (.030"/0.8Mm) Flux Core Wire, Mig Gasless Dcen (.035"/0.9Mm) Flux Core Wire..
🛒【Buy With Confidence】Flaring Promises You 30 Days Hassle-Free Returns And A Full 1-Year Warranty. You Have The Absolute Time To Use And Experience This Brand New Welder, All Machines Passed A Series Of Safety Tests And Laboratory Quality Tests Before Leaving Our Factory, We Have The Confidence That You Will Love It. Choose Flaring, Just Stitching With Fire..
🛒【Suitable For Various Welding Requirements】Load Our Mig Welder With Up To 11 Pounds Of Welding Wire Spool. It Is Compatible With Wire Diameters Ranging From 0.6Mm To 1.0Mm. For Manual Welding, It Supports Electrodes Such As 6018, 7013, And 6010. Whether You're A Hobbyist Or A Professional, Our Welder Is The One For You..
🛒【6 In 1 Multi-Functional Welding Machine】The Fm215d Welder Machine That Included Gas/Solid Wire Mig(Gmaw), Gasless Flux Core Mig(Fcaw), Stick/Mma, Spot Welding, Lift Tig, Spot Welding, Spool Gun Connector Optional (Tig Gun And Spool Gun Not Included). Suitable For All Kinds Of Welding Requirements . .030"/.035" Solid Wire, .030"/.035" Flux Core Wire, .035"/.040" Aluminum Wire(Spool Gun Not Included).
Features
- SYNERGIC MIG & MANUAL MIG Large LED Display Digital control and automatically match the recommend current and wire feeding speed when selecting the diameter of welding wire and gas material, also you can adjust the welding current according to your welding habit. Easy to work with beginners or professional welders.
- 6 IN 1 MULTI-FUNCTIONAL WELDING MACHINE The FM215D welder machine that included Gas/Solid Wire MIG(GMAW), Gasless Flux Core MIG(FCAW), Stick/MMA, Spot welding, Lift TIG, spot welding, spool gun connector optional (tig gun and spool gun not included). Suitable for all kinds of welding requirements . .030/.035 solid wire, .030/.035 flux core wire, .035/.040 aluminum wire(spool gun not included)
- ONE-BUTTON SELECTION Smart control panel allows you to easily monitor and adjust welding parameters, such as the welding mode, welding wire thickness, voltage, current, and type of gas. Stay in control and achieve precise results. Especially in MIG mode, it is recommended to use the three modes already set up, MIG Gas DCEP (.030/0.8mm) solid wire, MIG Gasless DCEN (.030/0.8mm) Flux core wire, MIG Gasless DCEN (.035/0.9mm) Flux core wire.
- SUITABLE FOR VARIOUS WELDING REQUIREMENTS Load our MIG welder with up to 11 pounds of welding wire spool. It is compatible with wire diameters ranging from 0.6mm to 1.0mm. For manual welding, it supports electrodes such as 6018, 7013, and 6010. Whether you're a hobbyist or a professional, our welder is the one for you.
- BUY WITH CONFIDENCE FLARING promises you 30 days hassle-free returns and a full 1-year warranty. You have the absolute time to use and experience this brand new welder, all machines passed a series of safety tests and laboratory quality tests before leaving our factory, we have the confidence that you will love it. Choose FLARING, JUST STITCHING WITH FIRE.
- See more on Amazon...
Brand: FLARING | Manufacturer: FLARING
Dimensions: 9.50 x 15.00 x 6.80 inches
See On Amazon #3
FLARING FC650DL Plasma Cutter, 65 Amp Non-Touch Pilot Arc Plasma Cutter Machine, 5/8 inch Clean Cut 3/4 inch Severance Cut, Dual Voltage 110/120V or 220/240V with Consumable Set Digital Display
Asin: B0CYPRYW3P
🛒【Suitable For Various Welding Requirements】Load Our Mig Welder With Up To 11 Pounds Of Welding Wire Spool. It Is Compatible With Wire Diameters Ranging From 0.6Mm To 1.0Mm. For Manual Welding, It Supports Electrodes Such As 6018, 7013, And 6010. Whether You're A Hobbyist Or A Professional, Our Welder Is The One For You..
🛒【One-Button Selection】Smart Control Panel Allows You To Easily Monitor And Adjust Welding Parameters, Such As The Welding Mode, Welding Wire Thickness, Voltage, Current, And Type Of Gas. Stay In Control And Achieve Precise Results. Especially In Mig Mode, It Is Recommended To Use The Three Modes Already Set Up, Mig Gas Dcep (.030"/0.8Mm) Solid Wire, Mig Gasless Dcen (.030"/0.8Mm) Flux Core Wire, Mig Gasless Dcen (.035"/0.9Mm) Flux Core Wire..
🛒【Synergic Mig & Manual Mig】Large Led Display Digital Control And Automatically Match The Recommend Current And Wire Feeding Speed When Selecting The Diameter Of Welding Wire And Gas Material, Also You Can Adjust The Welding Current According To Your Welding Habit. Easy To Work With Beginners Or Professional Welders..
🛒【Powerful Cutting Performance】Automatic Dual-Voltage 120/240V. With Advanced Igbt Inverter Technology, 10-60A Dc Output, 5/8” Ideal Clean Cut And 3/4” Maximum Severance Cut Under 220/240V. 10-35A Dc Output, 3/8" Ideal Clean Cut And 1/2" Maximum Severance Cut Under 110/120V. Suitable Cutting For Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, Etc. Uses Non-Hazardous Compressed Air To Cut, Safe And At Low Cost..
Features
- 65A NON-TOUCH PILOT ARC PLASMA CUTTER Effortlessly cuts through rough, painted, and rusty surfaces while generating minimal slag. The pilot arc technology enables cutting without direct contact between the tip and the metal, resulting in improved cutting quality and extended consumable lifespan.
- POWERFUL CUTTING PERFORMANCE Automatic dual-voltage 120/240V. With advanced IGBT inverter technology, 10-60A DC output, 5/8 ideal clean cut and 3/4 maximum severance cut under 220/240V. 10-35A DC output, 3/8 ideal clean cut and 1/2 maximum severance cut under 110/120V. SUITABLE CUTTING for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. Uses non-hazardous compressed air to cut, safe and at low cost.
- SUITABLE FOR VARIOUS WELDING REQUIREMENTS Load our MIG welder with up to 11 pounds of welding wire spool. It is compatible with wire diameters ranging from 0.6mm to 1.0mm. For manual welding, it supports electrodes such as 6018, 7013, and 6010. Whether you're a hobbyist or a professional, our welder is the one for you.
- SYNERGIC MIG & MANUAL MIG Large LED Display Digital control and automatically match the recommend current and wire feeding speed when selecting the diameter of welding wire and gas material, also you can adjust the welding current according to your welding habit. Easy to work with beginners or professional welders.
- ONE-BUTTON SELECTION Smart control panel allows you to easily monitor and adjust welding parameters, such as the welding mode, welding wire thickness, voltage, current, and type of gas. Stay in control and achieve precise results. Especially in MIG mode, it is recommended to use the three modes already set up, MIG Gas DCEP (.030/0.8mm) solid wire, MIG Gasless DCEN (.030/0.8mm) Flux core wire, MIG Gasless DCEN (.035/0.9mm) Flux core wire.
- See more on Amazon...
Brand: FLARING
See On Amazon #4
FLARING Digital Plasma Cutter, 55 Amp Non-Touch Pilot Arc Plasma Cutter Machine, 6 in 1 Gas MIG/Gasless Flux Core MIG/Stick/Lift TIG/Spot welding/Spool Gun Multi Process Welding Machine
Asin: B0CR1DPTWN
🛒【Ready To Work】It Takes Only 30 Seconds To Start Cutting. The Quick Air Coupler That Matches The Air Hose Is Already Installed Inside The Machine And Takes Only A Second To Install, So All You Need To Do Is Get The Air Compressor Ready. It's Very Beginner-Friendly..
🛒【Suitable For Various Welding Requirements】Load Our Mig Welder With Up To 11 Pounds Of Welding Wire Spool. It Is Compatible With Wire Diameters Ranging From 0.6Mm To 1.0Mm. For Manual Welding, It Supports Electrodes Such As 6018, 7013, And 6010. Whether You're A Hobbyist Or A Professional, Our Welder Is The One For You..
🛒【One-Button Selection】Smart Control Panel Allows You To Easily Monitor And Adjust Welding Parameters, Such As The Welding Mode, Welding Wire Thickness, Voltage, Current, And Type Of Gas. Stay In Control And Achieve Precise Results. Especially In Mig Mode, It Is Recommended To Use The Three Modes Already Set Up, Mig Gas Dcep (.030"/0.8Mm) Solid Wire, Mig Gasless Dcen (.030"/0.8Mm) Flux Core Wire, Mig Gasless Dcen (.035"/0.9Mm) Flux Core Wire..
🛒【Easy To Cut, Highly Effective】Automatic Dual-Voltage 110/220V Or 220/240V With Advanced Igbt Inverter Technology, The Maximum Severance Cut Can Reach Up To 3/4" (20 Mm), 1/2" (10Mm) Ideal Clean Cut, 60% Duty Cycle. Suitable For Alloy Steel, Stainless Steel, Mild Steel, Copper, Aluminum, Etc. The Recommended Current Is 50A, The Recommended Psi Is Between 20-40Psi When Connecting 110V, The Recommended Psi Is Between 30-60Psi When Connecting 220V..
Features
- NON-TOUCH PILOT ARC PLASMA CUTTER FL550D has the pilot arc function. It is a high frequency non-touch arc starting mode. Effortlessly cuts through rough, painted, and rusty surfaces while generating minimal slag. The pilot arc technology enables cutting without direct contact between the tip and the metal, resulting in improved cutting quality and extended consumable lifespan.
- EASY TO CUT, HIGHLY EFFECTIVE Automatic dual-voltage 110/220V or 220/240V With advanced IGBT inverter technology, the maximum severance cut can reach up to 3/4 (20 mm), 1/2 (10mm) ideal clean cut, 60% duty cycle. Suitable for alloy steel, stainless steel, mild steel, copper, aluminum, etc. The recommended current is 50A, the recommended psi is between 20-40psi when connecting 110V, the recommended psi is between 30-60psi when connecting 220V.
- READY TO WORK It takes only 30 seconds to start cutting. The quick air coupler that matches the air hose is already installed inside the machine and takes only a second to install, so all you need to do is get the air compressor ready. It's very beginner-friendly.
- ONE-BUTTON SELECTION Smart control panel allows you to easily monitor and adjust welding parameters, such as the welding mode, welding wire thickness, voltage, current, and type of gas. Stay in control and achieve precise results. Especially in MIG mode, it is recommended to use the three modes already set up, MIG Gas DCEP (.030/0.8mm) solid wire, MIG Gasless DCEN (.030/0.8mm) Flux core wire, MIG Gasless DCEN (.035/0.9mm) Flux core wire.
- SUITABLE FOR VARIOUS WELDING REQUIREMENTS Load our MIG welder with up to 11 pounds of welding wire spool. It is compatible with wire diameters ranging from 0.6mm to 1.0mm. For manual welding, it supports electrodes such as 6018, 7013, and 6010. Whether you're a hobbyist or a professional, our welder is the one for you.
- See more on Amazon...
Brand: FLARING
See On Amazon #5
FC650D touch arc plasma cutter
Asin: B0D2MSWYG5 | Model: FC650D | PartNumber: FC650D
Brand: FLARING | Manufacturer: FLARING
See On Amazon #6
FC650DL pilot arc plasma cutter
Asin: B0D2MSM6TZ | Model: FC650D | PartNumber: FC650D
Brand: FLARING | Manufacturer: FLARING
See On Amazon #7
FC550D PLASMA CUTTER
Asin: B0D2KDSFWQ | Model: FC550D 2024 version | PartNumber: FC550D 2024 version
Brand: FLARING | Manufacturer: FLARING
See On Amazon