Fasteners Plus - Buying Guide
Last Updated: 05/12/2024
Share on
Bestselling from Fasteners Plus on Amazon
- Fasteners Plus #7 High Temp Roof Boot Kit, Fits Pipe Diameters 5-1/2" - 11-1/2" Wide, Includes High ...
- Fasteners Plus ST Fastening #14 x 7/8" Maxx Steelbinder Metal Roofing Stitch Screws Metal-to-Metal G...
- Fasteners Plus #8 EPDM Roof Flashing Boot Kit, Fits Pipe Diameters 6-3/4" - 13-1/2" Wide, Includes S...
- Fasteners Plus ST Fastening #10 x 1-1/2" Kwikseal Woodbinder Metal Roofing Screws Metal-to-Wood Galv...
- Fasteners Plus A307 Coarse Fully Threaded Rod, Plain Finish, 1/2" -13 Thread Size, 24" Length, Right...
- Fasteners Plus Grade B7 Coarse Fully Threaded Rod, Plain Finish, 1" -8 Thread Size, 24" Length, Righ...
- Fasteners Plus ST Fastening #10 x 1-1/2" ZXL Woodbinder Metal Roofing Screws Metal-to-Wood Galvanize...
- Fasteners Plus Type 316 Stainless Steel Fully Threaded Rod, 3/4" -10 Thread Size, 24" Length Right H...
- Fasteners Plus Type 304 Stainless Steel Fully Threaded Rod, 1/2" -13 Thread Size, 18" Length Right H...
- Fasteners Plus ST Fastening #6 Roofjack Square Silicone High Temperature Pipe Flashing Boot (Pipe OD...
#1
Fasteners Plus #7 High Temp Roof Boot Kit, Fits Pipe Diameters 5-1/2" - 11-1/2" Wide, Includes High Temp Square Metal Roof Flashing Boot, NovaFlex Sealant and Roofing Stitch Screws, Red
Asin: B09Y2K5RVX | Model: SIL7S-RED-KIT | PartNumber: SIL7S-RED-KIT
Flexible Base - The Metal Roof Vent Boot Is Made With An Aluminum Base That Conforms To Any Style Of Corrugated Roofing Material. Simply Adjust The Base To Fit The Shape Of The Metal Surrounding The Vent Pipe And Fasten It Using The Stitch Screws..
Easy Installation - The Chimney Pipe Boot Is Designed With Clear Diameter Marks On The Rubber For Easy Identification And Cutting To Fit Around Your Roof Pipe. Ideal For A Metal Roof Stove Pipe Boot, Chimney Pipe Boot, And Other High-Temp Vents..
Tight Sealing - This Metal Roof Pipe Flashing Boot Kit Also Includes A Tube Of Urethane Sealant From Novaflex That Creates A Tight Seal Between The Roof Vent Pipe Boot And The Metal Sheet..
High Temp Rubber Roof Boot - Made With Quality Silicone, This Roof Boot Is Designed And Tested To Withstand Continuous Temperatures Up To 500 Degrees Fahrenheit. These Boots Also Hold Up Well Against Ozone, Uv Rays, And Other Outdoor Elements..
Features
- KIT INCLUDES - (1) #7 Square Metal Roof Boot | (1) NovaFlex Roof Sealant | (45ct) 1-4" x 7/8" Roofing Stitch Screws | (1) 5/16" Magnetic Socket Nutsetter | Base Width: 14" | Pipe OD: 5-1/2" - 11-1/2" | Max Temp: 500 degrees Fahrenheit.
- HIGH TEMP RUBBER ROOF BOOT - Made with quality silicone, this roof boot is designed and tested to withstand continuous temperatures up to 500 degrees Fahrenheit. These boots also hold up well against ozone, UV rays, and other outdoor elements.
- FLEXIBLE BASE - The metal roof vent boot is made with an aluminum base that conforms to any style of corrugated roofing material. Simply adjust the base to fit the shape of the metal surrounding the vent pipe and fasten it using the stitch screws.
- TIGHT SEALING - This metal roof pipe flashing boot kit also includes a tube of urethane sealant from NovaFlex that creates a tight seal between the roof vent pipe boot and the metal sheet.
- EASY INSTALLATION - The chimney pipe boot is designed with clear diameter marks on the rubber for easy identification and cutting to fit around your roof pipe. Ideal for a metal roof stove pipe boot, chimney pipe boot, and other high-temp vents.
- See more on Amazon...
Brand: Fasteners Plus | Manufacturer: Fasteners Plus
Weight: 3.65 pounds
See On Amazon #2
Fasteners Plus ST Fastening #14 x 7/8" Maxx Steelbinder Metal Roofing Stitch Screws Metal-to-Metal Galvanized (Pack of 250)
Asin: B09RQ6HWXR | Model: 14B87DLC0PS | PartNumber: 14B87DLC0PS
[Epdm Rubber Washer] Cupped Head Encapsulates To Provide A Secure Seal Even When Driven At An Angle.
[Color Options] Match High Volume Metal Panel Paint Colors.
[Deep Penetration] Self Drilling Fastener Easily Penetrates Steel Up To 0.210" Thickness With No "Point Walking".
[Coated Screws] Feature A Tough 2.5 Mils Of Powder Coating That Will Not Chalk Or Fade Due To Uv Inhibitor In All Colored Coatings..
Features
- [SELF DRILLING] Pole barn screws designed to attach metal roof and sidewall panels on pre-engineered metal buildings
- [COATED SCREWS] Feature a tough 2.5 mils of powder coating that will not chalk or fade due to UV inhibitor in all colored coatings.
- [EPDM RUBBER WASHER] Cupped head encapsulates to provide a secure seal even when driven at an angle
- [DEEP PENETRATION] Self drilling fastener easily penetrates steel up to 0.210 thickness with no point walking
- [COLOR OPTIONS] Match high volume metal panel paint colors
- See more on Amazon...
Brand: Fasteners Plus | Manufacturer: ST Fastening
Dimensions: 0.56 x 0.88 x 0.56 inches
See On Amazon #3
Fasteners Plus #8 EPDM Roof Flashing Boot Kit, Fits Pipe Diameters 6-3/4" - 13-1/2" Wide, Includes Square Metal Roof Pipe Flashing, NovaFlex Sealant and Roofing Stitch Screws, Black
Asin: B07MWBWF2K | Model: EPDM8S-BLK-KIT | PartNumber: EPDM8S-BLK-KIT | Ean: 0601844810727 | UPC: 601844810727
Flexible Base - The Metal Roof Vent Boot Is Made With An Aluminum Base That Conforms To Any Style Of Corrugated Roofing Material. Simply Adjust The Base To Fit The Shape Of The Metal Surrounding The Vent Pipe And Fasten It Using The Stitch Screws..
Easy Installation - Designed With Clear Diameter Marks On The Rubber For Easy Identification And Cutting To Fit Around Your Roof Pipe. Ideal For Water Heaters Roof Pipes, And Other Metal Roof Vents..
Tight Sealing - This Metal Roof Pipe Flashing Boot Kit Also Includes A Tube Of Urethane Sealant From Novaflex That Creates A Tight Seal Between The Roof Vent Pipe Boot And The Metal Sheet..
Temperature Tolerance - This Roof Boot Is Made Of A Man-Made Epdm Rubber And Tested To Withstand Temperatures Up To 275 Degrees Fahrenheit. These Boots Also Hold Up Well Against Ozone, Uv Rays, And Other Outdoor Elements..
Features
- KIT INCLUDES - (1) #8 Square EPDM Flashing | (1) NovaFlex Roof Sealant | (45ct) 1/4" x 7/8" Roofing Stitch Screws | (1) 5/16" Magnetic Socket Nutsetter | Base Width: 17" | Pipe OD: 6-3/4" - 13-1/2" | Max Temp: 275 degrees Fahrenheit.
- TEMPERATURE TOLERANCE - This roof boot is made of a man-made EPDM rubber and tested to withstand temperatures up to 275 degrees Fahrenheit. These boots also hold up well against ozone, UV rays, and other outdoor elements.
- FLEXIBLE BASE - The metal roof vent boot is made with an aluminum base that conforms to any style of corrugated roofing material. Simply adjust the base to fit the shape of the metal surrounding the vent pipe and fasten it using the stitch screws.
- TIGHT SEALING - This metal roof pipe flashing boot kit also includes a tube of urethane sealant from NovaFlex that creates a tight seal between the roof vent pipe boot and the metal sheet.
- EASY INSTALLATION - Designed with clear diameter marks on the rubber for easy identification and cutting to fit around your roof pipe. Ideal for water heaters roof pipes, and other metal roof vents.
- See more on Amazon...
Brand: Fasteners Plus | Manufacturer: Fasteners Plus
Weight: 4.66 Pounds
See On Amazon #4
Fasteners Plus ST Fastening #10 x 1-1/2" Kwikseal Woodbinder Metal Roofing Screws Metal-to-Wood Galvanized (Pack of 250)
Asin: B09RTSXSH4
[Epdm Rubber Washer] Vulcanized To A G-90 Steel Backed Washer To Provide Maximum Sealing Ability, Prevents Leaks, Even When Drilled At An Angle.
[Micro-Bit Point Design] Design Consistently Penetrates Metal Panels, Which Eliminates The Need To "Punch" The Metal Panels With A Sharp Point To Start The Drilling Process.
[Ks Lo-Root Thread Design] Fastener Thread Transitions From Fine To Coase. The Low Root Design Provides Excellent Pullout Strength Vs Traditional Or Hi-Lo Thread Forms.
[Ks V-Neck Head Design] Hwh With V-Neck Design Adds Strength To Prevent Head Twist Off Under Extreme Torque..
Features
- [COATED SCREWS] 2.5 mils of computer controlled powder coating that will not chalk or fade due to UV inhibitor in all colored coatings.
- [KS V-NECK HEAD DESIGN] HWH with V-neck design adds strength to prevent head twist off under extreme torque.
- [EPDM RUBBER WASHER] Vulcanized to a G-90 steel backed washer to provide maximum sealing ability, prevents leaks, even when drilled at an angle
- [KS LO-ROOT THREAD DESIGN] Fastener thread transitions from fine to coase. The low root design provides excellent pullout strength vs traditional or Hi-Lo thread forms
- [MICRO-BIT POINT DESIGN] Design consistently penetrates metal panels, which eliminates the need to punch the metal panels with a sharp point to start the drilling process
- See more on Amazon...
Brand: Fasteners Plus | Manufacturer: ST Fastening
Dimensions: 0.50 x 1.50 x 0.50 inches
See On Amazon #5
Fasteners Plus A307 Coarse Fully Threaded Rod, Plain Finish, 1/2" -13 Thread Size, 24" Length, Right Hand Threads
Asin: B0BBJRGTBY | Model: TRA-1224 | PartNumber: TRA-1224
Cut Threads: Rod Starts Off As Full Size Round Stock And Threads Are Cut Into The Material.
Plain Finish: Designed For Indoor Use Only Where Chemicals And Solvents Are Not Present.
Multi-Purpose: Fully Threaded Rod Used For Hanging Fixtures, Sprinklers, Lights And Much More.
Features
- SPECS: Diameter: 1/2 inch | Length: 24 inch | Thread Type: Coarse (standard) | Threads Per Inch: 13 | Fully Threaded | Grade: A307 | Material: Carbon Steel | Finish: Plain
- MULTI-PURPOSE: Fully threaded rod used for hanging fixtures, sprinklers, lights and much more
- CUT THREADS: Rod starts off as full size round stock and threads are cut into the material
- PLAIN FINISH: Designed for indoor use only where chemicals and solvents are not present
- See more on Amazon...
Brand: Fasteners Plus | Manufacturer: Fasteners Plus
Dimensions: 0.50 x 24.00 x 0.50 inches | Weight: 1.07 Pounds
See On Amazon #6
Fasteners Plus Grade B7 Coarse Fully Threaded Rod, Plain Finish, 1" -8 Thread Size, 24" Length, Right Hand Threads
Asin: B09TS1QQ92 | Model: TRB7-124 | PartNumber: TRB7-124
Cut Threads: Rod Starts Off As Full Size Round Stock And Threads Are Cut Into The Material.
Plain Finish: Designed For Indoor Use Only Where Chemicals And Solvents Are Not Present.
Commonly Used: To Bolt Pipe Flanges Together As It Can Handle Both High Temperature And High Pressure Applications.
Features
- SPECS: Diameter: 1 inch | Length: 24 inch | Thread Type: Coarse (standard) | Threads Per Inch: 8 | Fully Threaded | Grade: B7 |Material: Carbon Steel | Finish: Plain
- COMMONLY USED: To bolt pipe flanges together as it can handle both high temperature and high pressure applications
- CUT THREADS: Rod starts off as full size round stock and threads are cut into the material
- PLAIN FINISH: Designed for indoor use only where chemicals and solvents are not present
- See more on Amazon...
Brand: Fasteners Plus | Manufacturer: Fasteners Plus
Dimensions: 1.00 x 24.00 x 1.00 inches | Weight: 4.12 pounds
See On Amazon #7
Fasteners Plus ST Fastening #10 x 1-1/2" ZXL Woodbinder Metal Roofing Screws Metal-to-Wood Galvanized (Pack of 250)
Asin: B09W85RR7F
[Ks Lo-Root Thread Design] Fastener Thread Transitions From Fine To Coase. The Low Root Design Provides Excellent Pullout Strength Versus Traditional Or Hi-Lo Thread Forms.
[Micro-Bit Point Design] Drill Point Design Consistently Penetrades Metal Panels, Eliminates The Need To "Punch" The Metal Panels With A Sharp Point To Start The Drilling Process. Mb Point Is Excellent For Penetrating Multiple Thicknesses Of Steel Often Found On Ridge Cap Or Trim Applications.
[Zxl No Rust] 5/16" Cupped Hwh Is Manufactured From A Strong Zamac Zinc-Aluminum Alloy. Molded Head Encapsulates The Epdm Washer, Which Fits Neatly And Conforms To The Inside Of The Mold.
Features
- [COATED SCREWS] 2.5 mil of computer controlled powder coating apllied over zinc plating and chromate sealer. Resists harmful UV rays and chemical breakdown. Completely free of volatile organic compounds (VOC), and is entirely recyclable
- [ZXL NO RUST] 5/16 Cupped HWH is manufactured from a strong ZAMAC zinc-aluminum alloy. Molded Head encapsulates the EPDM washer, which fits neatly and conforms to the inside of the mold
- [KS LO-ROOT THREAD DESIGN] Fastener thread transitions from fine to coase. The low root design provides excellent pullout strength versus traditional or HI-LO thread forms
- [MICRO-BIT POINT DESIGN] Drill point design consistently penetrades metal panels, eliminates the need to punch the metal panels with a sharp point to start the drilling process. MB point is excellent for penetrating multiple thicknesses of steel often found on ridge cap or trim applications
- See more on Amazon...
Brand: Fasteners Plus | Manufacturer: ST Fastening
Dimensions: 0.31 x 1.50 x 0.31 inches | Weight: 2.53 pounds
See On Amazon #8
Fasteners Plus Type 316 Stainless Steel Fully Threaded Rod, 3/4" -10 Thread Size, 24" Length Right Hand Threads
Asin: B09V3BJWCX | Model: TR316SS-3424 | PartNumber: TR316SS-3424
Cut Threads: Rod Starts Off As Full Size Round Stock And Threads Are Cut Into The Material.
Type 316 Stainless Steel: Maximum Corrosion Resistance That Can Stand Up To Harsher Environments Including Exposure In Environments Near Saltwater.
Multi-Purpose: Fully Threaded Rod Used For Hanging Fixtures, Sprinklers, Lights And Much More.
Features
- SPECS: Diameter: 3/4 inch | Length: 24 inch | Thread Type: Coarse (standard) | Threads Per Inch: 10 | Fully Threaded | Material: Stainless Steel | Finish: Plain
- MULTI-PURPOSE: Fully threaded rod used for hanging fixtures, sprinklers, lights and much more
- CUT THREADS: Rod starts off as full size round stock and threads are cut into the material
- TYPE 316 STAINLESS STEEL: Maximum corrosion resistance that can stand up to harsher environments including exposure in environments near saltwater
- See more on Amazon...
Brand: Fasteners Plus | Manufacturer: Fasteners Plus
Dimensions: 0.75 x 24.00 x 0.75 inches | Weight: 2.50 pounds
See On Amazon #9
Fasteners Plus Type 304 Stainless Steel Fully Threaded Rod, 1/2" -13 Thread Size, 18" Length Right Hand Threads
Asin: B0BB1CCW5G | Model: TR304SS-1218 | PartNumber: TR304SS-1218
Cut Threads: Rod Starts Off As Full Size Round Stock And Threads Are Cut Into The Material.
Type 304 Stainless Steel: Great Corrosion Resistance That Can Stand Up To Harsher Environments.
Multi-Purpose: Fully Threaded Rod Used For Hanging Fixtures, Sprinklers, Lights And Much More.
Features
- SPECS: Diameter: 1/2 inch | Length: 18 inch | Thread Type: Coarse (standard) | Threads Per Inch: 13 | Fully Threaded | Material: Stainless Steel | Finish: Plain
- MULTI-PURPOSE: Fully threaded rod used for hanging fixtures, sprinklers, lights and much more
- CUT THREADS: Rod starts off as full size round stock and threads are cut into the material
- TYPE 304 STAINLESS STEEL: Great corrosion resistance that can stand up to harsher environments
- See more on Amazon...
Brand: Fasteners Plus | Manufacturer: Fasteners Plus
Dimensions: 0.50 x 18.00 x 0.50 inches
See On Amazon #10
Fasteners Plus ST Fastening #6 Roofjack Square Silicone High Temperature Pipe Flashing Boot (Pipe OD 4-3/4" to 10"), Red
Asin: B09SQFKHK1 | Model: SIL6S-RED | PartNumber: SIL6S-RED
Easy To Use: Clearly Marked And Can Be Easily Be Cut With Shears To Fit Exactly The Pipe Size Used.
Water Diverter: Square Roofjack Can Be Turned So Corner Is Point Up The Roof.
Flexible Aluminum Base: Allows Flashing To Conform To Any Metal Roof Configuration. Pipe Location Can Be Centered In The Flat Of The Panel Or The Rib. Urethane Sealant And Self-Driving Screws Complete The Installation.
Features
- SILICONE FLASHERS Flashers: Maximum resistance to ozone, UV light, and temperature range of -100 to +500 degrees Fahrenheit
- FLEXIBLE ALUMINUM BASE: Allows flashing to conform to any metal roof configuration. Pipe location can be centered in the flat of the panel or the rib. Urethane sealant and self-driving screws complete the installation
- EASY TO USE: Clearly marked and can be easily be cut with shears to fit exactly the pipe size used
- WATER DIVERTER: Square Roofjack can be turned so corner is point up the roof
- See more on Amazon...
Brand: Fasteners Plus | Manufacturer: ST Fastening
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 6.00 pounds
See On Amazon