Fgen - Buying Guide
Last Updated: 04/25/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
FGen 6pcs Wall Paste Does Not Fall Off Firmly Triangle Type Self-Adhesive Towel Hook
Asin: B07JB7G7LY | Model: FG004-mjg | PartNumber: FG004-mjg | Ean: 0680580502561 | UPC: 680580502561
3. The Triangular Self-Adhesive Towel Hook Is Made Of Durable Plastic And Does Not Fall Off Very Firmly..
5. Note: If The Low Temperature Is Less Than 10 Degrees Celsius, The Surface Can Be Preheated With A Heater. Not Suitable For Temperatures Above 40 Degrees Celsius. It Is Not Advisable To Hang Valuables And Precision Items. It Is Not Advisable To Hang Glassware..
4. Product Use Instructions: Clean The Surface To Ensure That The Surface Is Clean, Clean And Dry. Remove The Release Paper Behind The Backing, Hook The Hook And Press Hard..
2. One Bag Has 6 Triangle Self-Adhesive Towel Hooks, Size: 50Mm*50Mm.
Features
- 1. Triangle self-adhesive towel hook 6 piece set white.
- 2. One bag has 6 triangle self-adhesive towel hooks, size: 50mm*50mm
- 3. The triangular self-adhesive towel hook is made of durable plastic and does not fall off very firmly.
- 4. Product use instructions: Clean the surface to ensure that the surface is clean, clean and dry. Remove the release paper behind the backing, hook the hook and press hard.
- 5. Note: If the low temperature is less than 10 degrees Celsius, the surface can be preheated with a heater. Not suitable for temperatures above 40 degrees Celsius. It is not advisable to hang valuables and precision items. It is not advisable to hang glassware.
- See more on Amazon...
Brand: FGen | Manufacturer: FGen
Dimensions: 0.00 x 1.97 x 1.97 Inches | Weight: 0.00 pounds
See On Amazon #2
FGen 20pcs Stainless Steel Hooks Hanging Hooks Single Hooks Solid Hooks Family Hotel Bathroom Accessories Hook Hook
Asin: B07VY716QN | Ean: 0681413191068 | UPC: 681413191068
3. Made Of High Quality Stainless Steel To Prevent Corrosion And Rust, Made Of Stainless Steel To Ensure Quality And Service Life..
5. Accessories: Decorative Cover + Screw.
4. Hand Polished Stainless Steel Surface To Prevent Daily Scratches, Corrosion And Tarnish.
2. Size: 2.08* 0.82 Inches.
Features
- 1.20 sets of stainless steel hook single hook top hook hook coat hook hook cabinet hook hook hook hook.
- 2. Size: 2.08* 0.82 inches
- 3. Made of high quality stainless steel to prevent corrosion and rust, made of stainless steel to ensure quality and service life.
- 4. Hand polished stainless steel surface to prevent daily scratches, corrosion and tarnish
- 5. Accessories: decorative cover + screw
- See more on Amazon...
Brand: FGen | Manufacturer: FGen
Dimensions: 0.00 x 2.08 x 0.82 Inches
See On Amazon #3
FGen 12PCS Spades A Bottle Opener Creative Poker Shaped Stainless Steel Opener Bottler Beer Starter Suitable For Wallet
Asin: B07GNPBV9Q | Model: FG005-htakpq | PartNumber: FG005-htakpq | Ean: 0680580502196 | UPC: 680580502196
3. Design: It Is Convenient To Open Various Caps And Gently Open The Bottle Cap..
5. Applicable Gifts Occasions: Festivals, All Places, Trade Fairs, Advertising Promotions, Anniversary Celebrations, Business Gifts, Opening Ceremony, Awards Commemoration, Public Relations Planning, Awards.
4. Exquisite Workmanship And Delicate Edges Will Not Scratch Your Fingers When Used..
2. Made Of Heavy-Duty Stainless Steel, Made Of Heavy-Duty Stainless Steel, It Is The Perfect Tool For Your Favorite Beverage Lovers..
Features
- 1.12 new silver poker bottle opener, size: 85.32x53.36x1.7mm (3.4x2.1x0.067inch)
- 2. Made of heavy-duty stainless steel, made of heavy-duty stainless steel, it is the perfect tool for your favorite beverage lovers.
- 3. Design: It is convenient to open various caps and gently open the bottle cap.
- 4. Exquisite workmanship and delicate edges will not scratch your fingers when used.
- 5. Applicable gifts occasions: festivals, all places, trade fairs, advertising promotions, anniversary celebrations, business gifts, opening ceremony, awards commemoration, public relations planning, awards
- See more on Amazon...
Brand: FGen | Manufacturer: FGen
Dimensions: 0.07 x 3.40 x 2.10 Inches | Weight: 0.10 pounds
See On Amazon #4
FGen 50pcs Mini Clip 1.7-inch Stainless Steel, Clothesline, Bag Seal, Paper Clip, Clip Socks, Etc.
Asin: B07GLGGLV3 | Model: FG004-mnxj | PartNumber: FG004-mnxj | Ean: 0680580502189 | UPC: 680580502189
3. Clothesline, Bag Seal, Paper Clip, Clip Socks And Other Snack Seals For Multi-Purpose Clips, For Small Items Such As Life/Office.
5. Multi-Function, Can Be Used For Hanging Clothes, Hanging On Bulletin Boards, Walls, Nails Or Hooks, Things On The Rope, Such As Chip Clips And Paper Clips.
4. Unlike Plastic Or Wooden Clothespins, They Have Good Grip And Do Not Rust, Bend Or Separate..
2. Strong Elasticity, Easy To Grasp Clothes, Strong Grip And No Rust, Will Not Damage Your Clothes..
Features
- 1.50 stainless steel mini clip size: 1.7* 0.4 * 0.8 inches, 100% new brand and high quality, small size and space saving.
- 2. Strong elasticity, easy to grasp clothes, strong grip and no rust, will not damage your clothes.
- 3. Clothesline, bag seal, paper clip, clip socks and other snack seals for multi-purpose clips, for small items such as life/office
- 4. Unlike plastic or wooden clothespins, they have good grip and do not rust, bend or separate.
- 5. Multi-function, can be used for hanging clothes, hanging on bulletin boards, walls, nails or hooks, things on the rope, such as chip clips and paper clips
- See more on Amazon...
Brand: FGen | Manufacturer: FGen
See On Amazon #5
FGen 10 Pieces Stainless Steel Eye Board Ocean 5Th Oval Buckle Fixed Plate Seat Rope Pull Ring Oval Door Buckle
Asin: B07WGX5FD2 | Model: FG003-5hmk | PartNumber: FG003-5hmk | Ean: 0681413191112 | UPC: 681413191112
3. Corrosion Resistant, High Strength, Durable And Easy To Install In Salt Water Environment..
5. Size: Pad Length: 45Mm; Pad Thickness: 2.8Mm; Ring Diameter: 5Mm;.
4.304 Stainless Steel Is Mainly Used For Small Yachts And Boats, And Can Also Be Used As Luggage And Home Accessories..
2. Appearance: The Surface Is Bright And The Appearance Is Beautiful..
Features
- 1. Perfect design: high quality heavy stainless steel with wire drawing.
- 2. Appearance: The surface is bright and the appearance is beautiful.
- 3. Corrosion resistant, high strength, durable and easy to install in salt water environment.
- 4.304 stainless steel is mainly used for small yachts and boats, and can also be used as luggage and home accessories.
- 5. Size: pad length: 45mm; pad thickness: 2.8mm; ring diameter: 5mm;
- See more on Amazon...
Brand: FGen | Manufacturer: FGen
See On Amazon #6
FGen 8pcs Hidden Layer Board Support Wall Bookcase Invisible Partition Board Nails 14x140mm Hidden Board Bracket Wall Layer Board Expansion Pin Fixing Parts A Total Weight 200LBS
Asin: B07SKNLF7L | Ean: 0681413190917 | UPC: 681413190917
3. The Load-Bearing Rod Is A Hexagonal Column With Barbs And Plastic Shells. The Resistance Is Increased, It Is Not Shaken Smoothly, And It Can Withstand Heavy Loads. The Two Hidden Layer Supports Support The Bearing Capacity 50Lb. Each Hidden Shelf Holds 25 Pounds. For Heavier Shelves, Add Extra Brackets To Distribute Weight..
5. Concealed Shelves For Use In The Kitchen, Lounge, Bedroom, Bathroom, Living Room Or Any Room.
4. First Prepare A Suitable Wooden Board With A Drill Bit And Two Hidden Layers For A Hammer. Drill A 0.569 Inch Hole In The Wall With A Drill Bit. The Hole Length Is 3 Inches. Drill A 0.5 Inch Hole In The Hole In The Wall. The Hole Length Is 5.5Inch, And Then The Wall Is Placed On The Wall With The Hidden Layer Plate Support At One End. The Board Is Aligned And Installed, So That It Is Convenient And Simple To Install. (If You Can't Install It, You Can Tap It With A Hammer).
2. The Interior Is Made Of Cold-Rolled Steel, Which Is Corrosion-Resistant And Durable. The Exterior Is Made Of Plastic, Which Does Not Damage The Wood And Walls, And Firmly Backs The Material, Structural Column Or Block..
Features
- 1.8pcs hidden layer plate support, a hidden layer plate support total length is 8.5inch partition nail and plate support.
- 2. The interior is made of cold-rolled steel, which is corrosion-resistant and durable. The exterior is made of plastic, which does not damage the wood and walls, and firmly backs the material, structural column or block.
- 3. The load-bearing rod is a hexagonal column with barbs and plastic shells. The resistance is increased, it is not shaken smoothly, and it can withstand heavy loads. The two hidden layer supports support the bearing capacity 50LB. Each hidden shelf holds 25 pounds. For heavier shelves, add extra brackets to distribute weight.
- 4. First prepare a suitable wooden board with a drill bit and two hidden layers for a hammer. Drill a 0.569 inch hole in the wall with a drill bit. The hole length is 3 inches. Drill a 0.5 inch hole in the hole in the wall. The hole length is 5.5inch, and then the wall is placed on the wall with the hidden layer plate support at one end. The board is aligned and installed, so that it is convenient and simple to install. (If you can't install it, you can tap it with a hammer)
- 5. Concealed shelves for use in the kitchen, lounge, bedroom, bathroom, living room or any room
- See more on Amazon...
Brand: FGen | Manufacturer: FGen
See On Amazon #7
FGen 4pcs Wrought Iron Wall 6inch Round Bracket Bracket Bookshelf Wall Shelf Wall Hanging Partition Bearing Support Shelf Layer Board Support(Black)
Asin: B07KZQX4Q6 | Ean: 0681413190726 | UPC: 681413190726
3. Beautiful Appearance: Simple And Stylish Personality Bracket.
5. About The Installation: The Installation Requires A 6Mm-8Mm Drill Bit To Drill On The Wall, And Then Screw The Plastic Expansion Bolt To The Drill Hole..
4. Save Space: Save Space And Neatly Store, The Shelf Will Give You More Space..
2. Each Bracket Can Support 110 Lbs. The Wall-Mounted Shelf Bracket Is Made Of Tubular Iron And Is Durable And Sturdy..
Features
- 1.4pcs round bracket, 16pcs screw, 12pcs plastic expansion bolt, round bracket size: 15cm*8cm*22cm/6*3.1*0.86inch.
- 2. Each bracket can support 110 lbs. The wall-mounted shelf bracket is made of tubular iron and is durable and sturdy.
- 3. Beautiful appearance: simple and stylish personality bracket
- 4. Save space: save space and neatly store, the shelf will give you more space.
- 5. About the installation: the installation requires a 6mm-8mm drill bit to drill on the wall, and then screw the plastic expansion bolt to the drill hole.
- See more on Amazon...
Brand: FGen | Manufacturer: FGen
See On Amazon #8
FGen 10pcs Hidden Layer Board Support Wall Bookcase Invisible Partition Board Nails 12x120mm Hidden Board Bracket Wall Layer Board Expansion Pin Fixing Parts A Total Weight 220LBS
Asin: B07SJL65SY | Model: FG002-dyxzj | PartNumber: FG002-dyxzj | Ean: 0681413190900 | UPC: 681413190900
3. The Load-Bearing Rod Is A Hexagonal Column With Barbs And Plastic Shells. Its Resistance Is Increased, It Is Not Shaken Smoothly, And It Can Withstand Heavy Loads. The Two Hidden Layer Supports Support The Bearing Gravity 44Lb. Each Hidden Shelf Holds 22 Pounds. For Heavier Shelves, Add Extra Brackets To Distribute Weight..
5. Concealed Shelves For Use In The Kitchen, Lounge, Bedroom, Bathroom, Living Room Or Any Room.
4. First Prepare A Suitable Wooden Board With A Drill Bit And Two Hidden Layers For A Hammer. Drill A 0.48 Inch Hole In The Wall With A Drill Bit. The Hole Length Is 3 Inches. Drill A 0.389 Inch Hole In The Wall. The Hole Length Is 4.5Inch, And Then The Wall Is Placed On The Wall With A Hidden Layer Plate At One End. The Board Is Aligned And Mounted, So That The Installation Is Convenient And Simple. (If You Can't Install It, You Can Tap It With A Hammer).
2. The Interior Is Made Of Cold-Rolled Steel, Which Is Corrosion-Resistant And Durable. The Exterior Is Made Of Plastic, Which Does Not Damage The Wood And Walls, And Firmly Backs The Material, Structural Column Or Block..
Features
- 1.10pcs hidden layer plate support, a hidden layer plate support total length is 7.5inch partition nail and plate support.
- 2. The interior is made of cold-rolled steel, which is corrosion-resistant and durable. The exterior is made of plastic, which does not damage the wood and walls, and firmly backs the material, structural column or block.
- 3. The load-bearing rod is a hexagonal column with barbs and plastic shells. Its resistance is increased, it is not shaken smoothly, and it can withstand heavy loads. The two hidden layer supports support the bearing gravity 44LB. Each hidden shelf holds 22 pounds. For heavier shelves, add extra brackets to distribute weight.
- 4. First prepare a suitable wooden board with a drill bit and two hidden layers for a hammer. Drill a 0.48 inch hole in the wall with a drill bit. The hole length is 3 inches. Drill a 0.389 inch hole in the wall. The hole length is 4.5inch, and then the wall is placed on the wall with a hidden layer plate at one end. The board is aligned and mounted, so that the installation is convenient and simple. (If you can't install it, you can tap it with a hammer)
- 5. Concealed shelves for use in the kitchen, lounge, bedroom, bathroom, living room or any room
- See more on Amazon...
Brand: FGen | Manufacturer: FGen
See On Amazon #9
FGen 30pcs Gift Creative Small Blackboard Wedding Gift Home Decoration Crafts Decoration Wooden Blackboard Bar Table Decoration
Asin: B07KT4DLMC | Ean: 0680580502899 | UPC: 680580502899
3. Easy To Carry And Keep Where You Want.
5. Product Description: This Small Blackboard Is Simple, Retro, Original, Can Be Inserted Into The Flower Pot To Make Flowers, Can Write A Message On The Small Blackboard, Pretty Beautiful, Plus Muto Can Be Placed Directly, Each Blackboard Is Equipped With A Bottom Sitting.
4. Flower-Shaped Edge Design, Touch Safe, Looks Very Sweet..
2. These Blackboard Signs Are Made Of High Quality Wood And Are Strong And Safe..
Features
- 1.30pcs lace small blackboard, size: 8cm*6cm/3.15*2.36 inches, base: 3.9cm/1.54 inches, total length: 18cm/7.1 inches
- 2. These blackboard signs are made of high quality wood and are strong and safe.
- 3. Easy to carry and keep where you want
- 4. Flower-shaped edge design, touch safe, looks very sweet.
- 5. Product Description: This small blackboard is simple, retro, original, can be inserted into the flower pot to make flowers, can write a message on the small blackboard, pretty beautiful, plus Muto can be placed directly, each blackboard is equipped with a bottom Sitting
- See more on Amazon...
Brand: FGen | Manufacturer: FGen
Dimensions: 0.79 x 0.01 x 0.01 Inches | Weight: 0.85 pounds
See On Amazon #10
FGen 15pcs Painted Duck Chopsticks Stand Creative Chopsticks Exquisite Chopsticks Stand Exquisite Chopsticks Stand Cute Resin Duck Chopsticks Stand
Asin: B07KLZLZDM | Ean: 0680580502844 | UPC: 680580502844
3. Exquisite And Compact Is Its Characteristic Material Is Its Advantage, Durable..
5. As Long As The Water Is Cleaned, Use Chopsticks, Spoons, Practical Furnishings, Furniture Decoration, Etc..
4. Made Of Modern Technology, No Cracking, No Mold, Easy To Clean.
2. The Resin Is Watered And Then Hand-Painted.
Features
- 1.15pcs duck chopsticks size: length 63mm/2.48inch width 17mm/0.66inch height 29mm/1.14inch color: color
- 2. The resin is watered and then hand-painted
- 3. Exquisite and compact is its characteristic material is its advantage, durable.
- 4. Made of modern technology, no cracking, no mold, easy to clean
- 5. As long as the water is cleaned, use chopsticks, spoons, practical furnishings, furniture decoration, etc.
- See more on Amazon...
Brand: FGen | Manufacturer: FGen
See On Amazon #11
FGen 6pcs Premium Black Bathroom Toilet Hook, Heavy Black Entry Channel Hook, Coat Hook
Asin: B07FRYXXNR | Model: FG001-dyg | PartNumber: FG001-dyg | Ean: 0680580502028 | UPC: 680580502028
Stylish Black Finishes, Stylish Hooks Will Add Some Classic Minimalist Style To Match Your Room..
Six Black Coat Hooks And 24 Support Screws Allow You To Quickly And Easily Install And Securely Mount It To Any Wall..
Coat Hook Size: 128X37mm/5.04X1.46 Inches.
Can Be Installed In The Kitchen, Bedroom, Room, Office And Fitting Room, Easily Hang Out Jackets, Jackets, Hats, Necklaces, Jewelry, Keys, Towels, Handbags And Belts. Keep Your Home Clean And Orderly..
Features
- High quality and durable, made of high quality steel, not easily broken, not easy to rust and corrode.
- Can be installed in the kitchen, bedroom, room, office and fitting room, easily hang out jackets, jackets, hats, necklaces, jewelry, keys, towels, handbags and belts. Keep your home clean and orderly.
- Stylish black finishes, stylish hooks will add some classic minimalist style to match your room.
- Coat hook size: 128x37mm/5.04x1.46 inches
- Six black coat hooks and 24 support screws allow you to quickly and easily install and securely mount it to any wall.
- See more on Amazon...
Brand: FGen | Manufacturer: FGen
See On Amazon #12
FGen 60pcs Thick Stainless Steel Corner Code 90 Degree Right Angle Reinforcement Angle Iron Triangle 20mm x20mm x16mm L Bracket Bracket
Asin: B07HH13CC4 | Model: FG001-20mmjp | PartNumber: FG001-20mmjp | Ean: 0680580502400 | UPC: 680580502400
3.90° Right Angle Integrated Molding, The Thickness Of The Bearing Capacity Is Strong And Visible..
5. Length: 20Mm*20Mm*16Mm, Thickness Is 2Mm.
4. Solid Thickening, No Burr Makes You Install Assured..
2. Stainless Steel Surface Drawing Process To Deal With No Burrs And No Hand..
Features
- 1. The counterbore design is that the screw that is installed does not affect the appearance and will not scratch the hand because of the protruding screw.
- 2. Stainless steel surface drawing process to deal with no burrs and no hand.
- 3.90 right angle integrated molding, the thickness of the bearing capacity is strong and visible.
- 4. Solid thickening, no burr makes you install assured.
- 5. Length: 20mm*20mm*16mm, thickness is 2mm
- See more on Amazon...
Brand: FGen | Manufacturer: FGen
See On Amazon #13
FGen 4pcs Wrought Iron Wall 6inch Square Bracket Bracket Bookshelf Wall Shelf Wall Hanging Partition Bearing Support Shelf Layer Board Support(Black)
Asin: B07L7DRQBY | Ean: 0681413190764 | UPC: 681413190764
3. Beautiful Appearance: Simple And Stylish Personality Bracket.
5. About The Installation: The Installation Requires A 6Mm-8Mm Drill Bit To Drill On The Wall, And Then Screw The Plastic Expansion Bolt To The Drill Hole..
4. Save Space: Save Space And Neatly Store, The Shelf Will Give You More Space..
2. Each Bracket Can Support 110 Lbs. The Wall-Mounted Shelf Bracket Is Made Of Tubular Iron And Is Durable And Sturdy..
Features
- 1.4pcs Square bracket, 20pcs screw, 16pcs plastic expansion bolt, round bracket size: 15.5cm*6cm*20cm/6*2.4*0.78inch.
- 2. Each bracket can support 110 lbs. The wall-mounted shelf bracket is made of tubular iron and is durable and sturdy.
- 3. Beautiful appearance: simple and stylish personality bracket
- 4. Save space: save space and neatly store, the shelf will give you more space.
- 5. About the installation: the installation requires a 6mm-8mm drill bit to drill on the wall, and then screw the plastic expansion bolt to the drill hole.
- See more on Amazon...
Brand: FGen | Manufacturer: FGen
See On Amazon #14
FGen 20pcs Thick Stainless Steel Corner Code 90 Degree Right Angle Reinforcement Angle Iron Triangle 40mm x40mm x16mm L Bracket Bracket
Asin: B07HH1YHT7 | Model: FG002-40mmjp | PartNumber: FG002-40mmjp | Ean: 0680580502417 | UPC: 680580502417
3.90° Right Angle Integrated Molding, The Thickness Of The Bearing Capacity Is Strong And Visible..
5. Length: 40Mm*40Mm*16Mm, Thickness Is 2Mm.
4. Solid Thickening, No Burr Makes You Install Assured..
2. Stainless Steel Surface Drawing Process To Deal With No Burrs And No Hand..
Features
- 1. The counterbore design is that the screw that is installed does not affect the appearance and will not scratch the hand because of the protruding screw.
- 2. Stainless steel surface drawing process to deal with no burrs and no hand.
- 3.90 right angle integrated molding, the thickness of the bearing capacity is strong and visible.
- 4. Solid thickening, no burr makes you install assured.
- 5. Length: 40mm*40mm*16mm, thickness is 2mm
- See more on Amazon...
Brand: FGen | Manufacturer: FGen
See On Amazon #15
FGen 6 Sets of Furniture Legs with Hook Bolts are Very Suitable for Furniture Legs 1.91.90.08Inch Used in Sofa Legs, Coffee Table Legs, TV Cabinet Legs, Etc.
Asin: B07QZMB1BK | Model: FG007-sfjp | PartNumber: FG007-sfjp | Ean: 0681413190849 | UPC: 681413190849
3. The Chrome Plate On The Surface Of The Sofa Feet Enhances The Service Life And Corrosion Resistance..
5. The Installation Is Simple And Quick, The Design Is Small And Light, Which Is Convenient For People To Install, Effectively Protecting The Furniture Feet And Making The Furniture More Durable..
4. The Package Includes The Necessary Parts: 6 Sets Of Sofa Leg Mounting Plates; 6 Hanger Bolts; 6 Female Converters; 24 Screw Adapters For 5Mm Unthreaded Holes..
2. The Flat Design Of The Foot Cover Greatly Increases The Aesthetics Of The Furniture And Makes The Furniture More Stable..
Features
- 1.6 sets of sofa foot cover size 49*49*2.1mm/1.9*1.9*0.08inch used in sofa legs, coffee table legs, TV cabinet legs, etc.
- 2. The flat design of the foot cover greatly increases the aesthetics of the furniture and makes the furniture more stable.
- 3. The chrome plate on the surface of the sofa feet enhances the service life and corrosion resistance.
- 4. The package includes the necessary parts: 6 sets of sofa leg mounting plates; 6 hanger bolts; 6 female converters; 24 screw adapters for 5mm unthreaded holes.
- 5. The installation is simple and quick, the design is small and light, which is convenient for people to install, effectively protecting the furniture feet and making the furniture more durable.
- See more on Amazon...
Brand: FGen | Manufacturer: FGen
See On Amazon