GLTL - Buying Guide
Last Updated: 05/11/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
GLTL Gaussmeter Tesla Meter Surface Magnetic Field Tester with N/S Function + Metal Probe
Asin: B07Z89YX9S | Model: WT103 | PartNumber: WT103
Ambient Temperature: 5℃~40℃ Relative Humidity: 20%~80% (Non-Condensing).
Package Included: 1 X Wt103 Gaussmeter Tesla Meter; 1 X User Manual; 1 X Metal Probe;1 X Dc Adapter ( Includes Aaa*3 Batteries ).
Basic Error: 0-1000Mt(±2%); 1000Mt-2400Mt(±5%).
Features
- Application: Handheld digital WT103 gauss meter used to measure the magnetic field of the permanent magnet material surface, DC motors, speakers, magnetic separator, permanent magnetic separator magnetic field demagnetization and the leakage of the magnetic field, parts machining residual magnetic field. Measuring range: 0 to 200mT milli-Tesla of - 2000mT milli-Tesla
- Basic error: 0-1000mT( 2%); 1000mT-2400mT( 5%)
- Ambient temperature: 5 ~40 Relative Humidity: 20%~80% (non-condensing)
- Package Included: 1 x WT103 Gaussmeter Tesla meter; 1 x User Manual; 1 x Metal Probe;1 x DC Adapter ( includes AAA*3 Batteries )
- See more on Amazon...
Brand: GLTL | Manufacturer: GLTL
Weight: 0.02 pounds
See On Amazon #2
GLTL 100cm Round Sample GSM Cutter/Textile Carpet Sample Cutter,Weight Test Cutter
Asin: B07FMGVYDP | Model: QYD-GSM-100-YS | PartNumber: QYD-GSM-100-YS
♥♥♥Warning:The Blade Is Very Sharp, Do Not Place Your Hand At The Bottom Of The Machine To Avoid Injury..
Welcome To Buy The Accessories We Sell..
Gsm Cutter For Is A Specialized Instrument To Determine The Gsm Of The Fabric (Woven, Non Woven Or Knitted). Our Sample Cutter For Gsm (G/M²) Can Be Used To Cut Virtually Any Type Of Material Including Film, Foam, Carpet, Paper And Board.Specimen Area That It Cuts Can Be Any Where In The Middle Of The Material Or Edge Of The Material. Diameter Of The Cutting Area: 4.5"/ 11.5Cm. Appx 2-3 Layers Of Fabric/ Normally Better To Cut 1 At A Time, Again Depends How Thick The Fabric Is. Sampling Area: 100 C㎡. The Weight Of The Cut Sample Is Measured Using An Electronic Balance, And Multiplied By 100 To Obtain The Weight Of 1㎡ Of The Sample..
Features
- Conformity standard ASTM D3776,BS 2471,IWS TM13,JIS L1018 /L1096.Used to cut all kinds of Paper and fabric (thickness less than 4mm).Standard accessory 4 blades; 1 pad.
- GSM CUTTER for is a specialized instrument to determine the GSM of the fabric (Woven, Non Woven or Knitted). Our sample cutter for GSM (g/m ) can be used to cut virtually any type of material including film, foam, carpet, paper and board.Specimen area that it cuts can be any where in the middle of the material or edge of the material. Diameter of the cutting area: 4.5/ 11.5cm. Appx 2-3 layers of fabric/ normally better to cut 1 at a time, again depends how thick the fabric is. Sampling area: 100 c . The weight of the cut sample is measured using an electronic balance, and multiplied by 100 to obtain the weight of 1 of the sample.
- Warning:The blade is very sharp, do not place your hand at the bottom of the machine to avoid injury.
- Welcome to buy the accessories we sell.
- See more on Amazon...
Brand: GLTL | Manufacturer: GLTL
See On Amazon #3
GLTL 3PCS Cross Hatch Adhesion Tester Cross-Cut Tester Kit
Asin: B0728MFYRG | Model: BAI-GE-DAN | PartNumber: BAI-GE-DAN | Ean: 0767520694569 | UPC: 767520694569
Multi-Blade Cutter Tooth Tip Width: ≯ 0.05Mm.Temperature: 23 ± 2 ° C; Relative Humidity: 50 ± 5%..
Multi-Blade Cutter Addendum Straightness: ≯ 0.003Mm ≯ 0.006Mm..
Features
- Multi-blade cutter spacing: 1 +0.01mm, 2+0.01mm. 3+0.05mm. Cutter spacing and cutter types: 1 2mm with 11 teeth and 3mm with 11 teeth
- Multi-blade cutter addendum straightness: 0.003mm 0.006mm.
- Multi-blade cutter tooth tip width: 0.05mm.Temperature: 23 2 C; Relative humidity: 50 5%.
- See more on Amazon...
Brand: GLTL | Manufacturer: GLTL
See On Amazon #4
GLTL General Tools Depth Gauge Vernier Caliper,0-6"/150mm,0-8"/200mm,0-12"/300mm (Digital 0-300mm)
Asin: B07Z6CXZPQ | Model: NH-300MM | PartNumber: NH-300MM | Ean: 0714035063465 | UPC: 714035063465
★Some People Think That This Mechanical Caliper Is Not Easy To Read Data, Just Like A Needle Watch And An Electronic Display Watch, It Is Just A Habit. This Kind Of Mechanical Caliper Is The Most Suitable For The Bad Working Environment Without Malfunction, And The Precision Deviation Is Not Easy To Occur..
★A Safe Protective Package To Ensure That It Is Not Vulnerable To Impact Damage..
★★★Depth Gage Can Measure The Depth Of Holes, Steps And Columns More Accurately..
★Surface Chrome Plating, With Sufficient Hardness And Corrosion Resistance..
Features
- 0.02mm Accuracy Alloyed Electroplating Chrome Vernier caliper 0-150mm 0-200mm 0-300mm range Locking screw for holding measurement.
- Surface chrome plating, with sufficient hardness and corrosion resistance.
- Some people think that this mechanical caliper is not easy to read data, just like a needle watch and an electronic display watch, it is just a habit. This kind of mechanical caliper is the most suitable for the bad working environment without malfunction, and the precision deviation is not easy to occur.
- Depth Gage can measure the depth of holes, steps and columns more accurately.
- A safe protective package to ensure that it is not vulnerable to impact damage.
- See more on Amazon...
Brand: GLTL | Manufacturer: GLTL
See On Amazon #5
GLTL Concrete Rebound Hammer Tester ZC3-A Resiliometer Hammer Test Meter Tool 10-60Mpa ASTM C 805, ISO 8045
Asin: B07FL6SJMX | Ean: 0729043784394 | UPC: 729043784394
Our Concrete Resiliometer Has Been Approved As "Recommended Product For Engineering Construction" By The Ministry Of Construction..
Package Include: 1Pcs X Concrete Rebound Hammer 1Pcs X Millstone 1Pcs X Flip Extension Spring 1Pcs X Buffer Spring 1Pcs X Screwdriver 1Pcs X Manual.English Operation Manual Attached.
Product Characteristics: Hammer Shell With Special Treatment, High Hardness, Long-Term Use Of Non-Draw Traces In Raw Materials Processing Technology, Precision Design Other Aspects Of Life Are Greatly Improved..
Features
- Product Description: It is in accordance with technical regulation of ASTM C 805/,ISO 8045, used for testing of concrete compressive strength within the scope of 10-60Mpa, with the system standard energy of 2.207J, and value indicating system of pointer direct reading.
- Product Characteristics: Hammer shell with special treatment, high hardness, long-term use of non-draw traces in raw materials processing technology, precision design other aspects of life are greatly improved.
- Our concrete resiliometer has been approved as Recommended Product for Engineering Construction by the Ministry of Construction.
- Package include: 1PCS x Concrete Rebound Hammer 1PCS x Millstone 1PCS x Flip extension spring 1PCS x Buffer spring 1PCS x Screwdriver 1PCS x Manual.English operation manual attached
- See more on Amazon...
Brand: GLTL | Manufacturer: GLTL
See On Amazon #6
GLTL Magnetic Polarity Tester Polarity N/S Test Gauss Meter Magnetic Pole Identifier N/S Detection Pen
Asin: B082SF1TBN | Model: WT-60-565 | PartNumber: WT-60-565
★ Display: 2 Led Display (Green = S Pole, Red = N Pole)..
★ Service Temperature: - 20℃ ~ + 80℃, Storage Temperature: - 40℃ ~ + 150℃..
★ Use Battery: 1X1.5V Lr03 Aaa Battery （Not Included）(Continuous Use Time > 10 Hours)..
★ Induction Value: 0.005 Tesla = 5 Mt, Sensitivity: ± 5Mt..
Features
- Size: about 140 * 20 * 19mm,Sensitive area 6 * 3mm.
- Induction value: 0.005 tesla = 5 mt, Sensitivity: 5mt.
- Display: 2 LED display (green = S pole, red = N pole).
- Use battery: 1X1.5V LR03 AAA battery Not included (continuous use time > 10 hours).
- Service temperature: - 20 ~ + 80 , Storage temperature: - 40 ~ + 150 .
- See more on Amazon...
Brand: GLTL | Manufacturer: GLTL
See On Amazon #7
GLTL 3pcs General blades for Adhesion Tester
Asin: B072JK6CDD | Model: 3 | PartNumber: 3 | Ean: 0767520694613 | UPC: 767520694613
Multi-Blade Cutter Tooth Tip Width: ≯ 0.05Mm.Multi-Blade Cutter Spacing: 1 +0.01Mm, 2+0.01Mm..
The Blade Cutter Is A Blade Made According To The Standard Iso2409-1992. It Is Processed Independently By Cnc. It Is Made Of Excellent Stainless Steel. The Blade Is Sharp And Can Be Used Repeatedly. It Is A General Standard Part And Can Be Installed On Most Instruments..
Multi-Blade Cutter Addendum Straightness: ≯ 0.003Mm ≯ 0.006Mm..
Features
- 3pcs Cutter spacing and cutter types: 1mm ,2mm,3mm with 11 teeth. Made of high quality stainless steel, with hardness up to 65HRC.
- Multi-blade cutter addendum straightness: 0.003mm 0.006mm.
- Multi-blade cutter tooth tip width: 0.05mm.Multi-blade cutter spacing: 1 +0.01mm, 2+0.01mm.
- The blade cutter is a blade made according to the standard iso2409-1992. It is processed independently by CNC. It is made of excellent stainless steel. The blade is sharp and can be used repeatedly. It is a general standard part and can be installed on most instruments.
- See more on Amazon...
Brand: GLTL | Manufacturer: GLTL
See On Amazon #8
GLTL 3-in-1 Rotating Cross Hatch Adhesion Tester Cross-Cut Tester Kit with 1/mm/2mm/3mm blades, metal handle
Asin: B073GZ1NDV | Model: BAI_GE_X | PartNumber: BAI_GE_X | Ean: 0603432957173 | UPC: 603432957173
3， Standard Tool 3-In-1 Rotating Cross Hatch Adhesion Tester Cross-Cut Tester Kit With 1Mm/2Mm/3Mm Blades；.
2， Used In Gb/T9286-98, Bs 3900 E6/Astm D3359；.
Features
- 1 The instrument is designed and manufactured according to the standard of ISO2409-1992
- 2 Used in GB/T9286-98, BS 3900 E6/ASTM D3359
- 3 Standard tool 3-in-1 Rotating Cross Hatch Adhesion Tester Cross-Cut Tester Kit with 1mm/2mm/3mm blades
- See more on Amazon...
Brand: GLTL | Manufacturer: GLTL
Weight: 1.76 Pounds
See On Amazon #9
GLTL 50PCS Dry & Dry Premium Humidity Indicator Cards (Reusable) 10-60% 6 Spot
Asin: B0869LYP57 | Model: 68556564454662 | PartNumber: 68556564454662
Indicator Changes Blue(Dry) To Pink(Humid). Humidity Indicator Cards Are Sensitive To Temperature, Humidity, Atmospheric Pressure, And Wind. Therefore, They Do Not Work Well In Open Air. They Work Well And Display Accurate Relative Humidity Level In Enclosed Space..
Dry & Dry - Premium Quality .It Is Strictly Tested For Clear Color Change In Each Humidity Level(10%-60%) You Can Experience A Big Difference Compared To Other Products. Products Of Dry&Dry Guarantees 100% Satisfaction..
Features
- Dry & Dry Humidity Indicator Card is Premium Quality. It is strictly tested for clear color change .When you initially open the card, all dots sometimes react and change color because they are exposed to sudden humidity. If you wait for about 30 minutes, the card will calibrate and you will be able to read the humidity level. If 10% dot is pink and 30% dot is blue, and 20% dot is lavender, then the humidity level is about 15%. If the 30% dot is pink, it is time to change the desiccant.
- DRY & DRY - PREMIUM QUALITY .It is strictly tested for clear color change in each Humidity Level(10%-60%) You can experience a big difference compared to other products. Products of Dry&Dry guarantees 100% satisfaction.
- Indicator Changes Blue(Dry) to Pink(Humid). Humidity indicator cards are sensitive to temperature, humidity, atmospheric pressure, and wind. Therefore, they do not work well in open air. They work well and display accurate relative humidity level in enclosed space.
- See more on Amazon...
Brand: GLTL | Manufacturer: GLTL
See On Amazon #10
GLTL Ultrasonic Spot Welder Welding Machine for Manure Belt Farm Convey or Plastic cloth Soundproof cotton 110V
Asin: B07Z92TJND | Ean: 0714035063489 | UPC: 714035063489
Modes : Kl-2806 ,650W★ Frequency : 28Khz (Powerful Than 35Khz)..
Horn Diameter: 2-8Mm..
When You Place The Order, Please Inform Us What Material You’D Like To Weld And Which Welding Head You Want And The Exact Size. This Product Is Customized, So Please Keep In Touch With Us With Email..
Features
- For thermoplastic, non-woven, nylon cloth and so on fusion, riveting, spot welding and so on, mainly used in textile, clothing, shoes, leather, electronics, toys, automotive parts, plastics and other industries.
- When you place the order, please inform us what material you d like to weld and which welding head you want and the exact size. This product is customized, so please keep in touch with us with email.
- Modes : KL-2806 ,650W Frequency : 28KHZ (Powerful than 35KHZ).
- Horn diameter: 2-8mm.
- See more on Amazon...
Brand: GLTL | Manufacturer: GLTL
See On Amazon