Geekstory - Buying Guide
Last Updated: 05/08/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
VK-162 G-Mouse USB GPS Dongle Navigation Module External GPS Antenna Remote Mount USB GPS Receiver for Raspberry Pi Support Google Earth Window Linux Geekstory
Asin: B078Y52FGQ | Model: FZ0576 | PartNumber: FZ0576 | Ean: 0702795763978 | UPC: 702795763978
It Is A Magntized Antenna,If Get The Gps Signal,Please Use The Gps Module Outdoor,If You Want To Use The Gps Module Indoor,Please Install Gps Signal Amplifier In Your Room.
Documentation You Can Find At The Bottom Of The Details Page - Product Guides And Documents: (User Manual (Pdf), Which Contains Details On How To Use And Links To The Drivers..
This Usb Gps Can Be Used For Mac Computer, But It Requires Very Professional Technical Skills..
The Cable Length Is 190Cm. The Usb Gps Is A Great, Easy, And An Awesome Solution For Travelers.It Works Anywhere Around The World. After You Download The Maps For The Country Traveling, It Will Pin Point Exactly Where You Are Without Having To Pay Any Service..
Features
- VK-162 GPS support windows and linux system, not for android and IOS system. It is NOT plug and play for most device. You must install driver before make it work.
- The cable length is 190cm. The USB GPS is a great, easy, and an awesome solution for travelers.It works anywhere around the world. After you download the maps for the country traveling, it will pin point exactly where you are without having to pay any service.
- It is a magntized antenna,if get the GPS signal,please use the GPS module outdoor,If you want to use the GPS module indoor,please install GPS signal amplifier in your room
- This usb gps can be used for mac computer, but it requires very professional technical skills.
- Documentation you can find at the bottom of the details page - Product guides and documents: (User Manual (PDF), which contains details on how to use and links to the drivers.
- See more on Amazon...
Brand: Geekstory | Manufacturer: Geekstory
Dimensions: 0.87 x 5.91 x 4.09 inches
See On Amazon #2
Geekstory 915MHZ ESP32 LoRa Development Board V3 SX1262 ESP32 LoRa V3 with OLED Display + LoRa 32 V3 Housing + LoRa Antenna for Arduino LoraWan IOT Internet, not Compatible with LoRa V2 (Pack of 2)
Asin: B0CYSKXTXF
-Type-C Usb Interface With Full Voltage Regulator, Esd Protection, Short Circuit Protection, Rf Shielding And Other Protection Measures. Integrated Sh1.25-2 Battery Interface, Integrated Lithium Battery Management System. Integrated Cp2102 Usb-To-Serial Interface Chip..
-If You Have Any Question, Please Confirm It With Geekstory As Follows: Click "Geekstory" (You Can Find "Sold By Geekstory" Under Buy Now Button), In The New Page, Click "Ask A Question"..
-This 915Mhz Lora Board Comes Unassembled, Soldering Is Required For You, Not Equipped With Lithium Battery. You Can Power 915 Lora Board Via 3.7V Lithium Battery, 3.3V / 5V Pin, Or On-Board Type C 5V. To Make It Work Better, 5V Type C Power Is Recommended..
-Microprocessor: Esp32-S3fn8 Dual-Core Processor, Frequency Up To 240 Mhz. Sx1262 Lora Node Chip..
Features
- -You will receive, 2pcs 863-928MHz esp32 lora V3 + 2pcs 915mhz lora antenna + 2pcs 2pin 1.25mm cable. (This antenna can be used with the lora case).
- -Microprocessor: ESP32-S3FN8 dual-core processor, frequency up to 240 MHz. SX1262 LoRa node chip.
- -Type-C USB interface with full voltage regulator, ESD protection, short circuit protection, RF shielding and other protection measures. Integrated SH1.25-2 battery interface, integrated lithium battery management system. Integrated CP2102 USB-to-serial interface chip.
- -This 915MHz LoRa board comes unassembled, soldering is required for you, not equipped with lithium battery. You can power 915 lora board via 3.7V lithium battery, 3.3V / 5V pin, or on-board type C 5V. To make it work better, 5V type C power is recommended.
- -If you have any question, please confirm it with Geekstory as follows: Click Geekstory (you can find Sold by Geekstory under Buy Now button), in the new page, click Ask a question.
- See more on Amazon...
Brand: Geekstory | Manufacturer: Geekstory
Warranty: Six Months
See On Amazon #3
32db High Gain Cirocomm 5cm Active GPS Antenna Ceramic Antenna IPEX Antenna 25x25x5mm Geekstory
Asin: B078Y2WNY6 | Model: FZ1546 | PartNumber: FZ1546 | Ean: 0702795763992 | UPC: 702795763992
Dc 3V - 5V Voltage, 10Ma Power.
If You Need Any Gps Module, Please Confirm It With Me By Message.
Built-In Ceramic Active Antenna.
Ipex Connector.
Features
- With Center Frequency 1575.42MHZ
- IPEX Connector
- DC 3V - 5V voltage, 10mA power
- Built-in ceramic active antenna
- If you need any gps module, please confirm it with me by message
- See more on Amazon...
Brand: Geekstory | Manufacturer: Geekstory
Dimensions: 0.20 x 1.10 x 9.84 inches | Weight: 0.02 Pounds
See On Amazon #4
Geekstory BN-880 GPS Module U8 with Flash HMC5883L Compass + GPS Active Antenna Support GPS Glonass Beidou Car Navigation for Arduino Raspberry Pi Aircraft Pixhawk APM Flight Controller
Asin: B078Y6323W | Model: FZ2920 | PartNumber: FZ2920 | Ean: 0702795764043 | UPC: 702795764043
Bn 880 Gps Module Has Flash To Save Configuration. So You Do Not Need To Reset Next Time When You Use It.
When You Use It For Raspberry Pi, There Is No Driver Needed But You Need To Install Software.
Dits Data Level Is Ttl Or Rs-232, Default Ttl Level. To Make It Be Rs232 Output, You Need To Use One Ttl To Rs232 Converter Cable.
Bn 880 Gps Module Is Dual Module Compass, With And Electronic Compass Ic Hmc5883l.
Features
- BN-880 is suitable for Open source flight controller, not for flight control with SCM
- Bn 880 gps module is dual module compass, with and electronic compass IC HMC5883L
- Bn 880 gps module has flash to save configuration. So you do not need to reset next time when you use it
- DIts data Level is TTL or RS-232, Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable
- When you use it for Raspberry Pi, there is no driver needed but you need to install software
- See more on Amazon...
Brand: Geekstory | Manufacturer: Geekstory
Dimensions: 0.39 x 1.18 x 1.18 inches | Weight: 0.04 Pounds
See On Amazon #5
Geekstory Optical Fingerprint Reader Sensor Module Door Lock Access Control Red Light for Arduino Mega2560 UNO R3
Asin: B07BQ9VNWR | Model: GR2904 | PartNumber: GR2904 | Ean: 0702795764432 | UPC: 702795764432
Package Includes:1 X Optical Fingerprint Reader Sensor, 2 X Cable. You Can Enroll New Fingers Directly - Up To 240 Finger Prints Can Be Stored.
The Fingerprint Moudle Documentation Link Cannot Be Displayed. If You Need Technical Documentation, Please Click “Geekstory” To Em-Ail Us.
Applications: Fingerprint Door Locks, Safes, Guns, Financial And Other Security Areas; Access Control Systems, Industrial Computers, Pos Machines, Driving Training, Attendance And Other Areas Of Identity; Fingerprint Payment And Other Financial Areas.
Fingerprint Sensor Module Can Work With Any Microcontroller Which With Serial Port: Such As Compatible With Arduino, 51, Avr, Stm32, Pic, Arm, Msp430.
Features
- Optical fingerprint sensor secure your project with biometrics. This fingerprint module can be used for fingerprint collection, fingerprint registration, fingerprint comparison and fingerprint search, it's easy to use, so its perfect for any project
- Fingerprint sensor module can work with any microcontroller which with serial port: such as compatible with arduino, 51, avr, stm32, pic, arm, msp430
- Package Includes:1 X Optical Fingerprint Reader Sensor, 2 X Cable. You can enroll new fingers directly - up to 240 finger prints can be stored
- Applications: Fingerprint door locks, safes, guns, financial and other security areas; Access control systems, industrial computers, POS machines, driving training, attendance and other areas of identity; fingerprint payment and other financial areas
- The fingerprint moudle documentation link cannot be displayed. If you need technical documentation, please click Geekstory to em-ail us
- See more on Amazon...
Brand: Geekstory | Manufacturer: Geekstory
See On Amazon #6
Geekstory BN-808 G-Mouse USB GPS Dongle Navigation Module M8030-KT Chip External GPS Antenna with 4M Flash USB GPS Receiver for Raspberry Pi Linux Windows 7 8 10
Asin: B0B53K5Q2L
You Need To Install The Driver To Use Bn-808 Usb Gps Module On Windows System, But It Is Plug And Play On Linux System.
Drive Link: Https(:)//Tinyurl.Com/Gps-Module-Manual.
The Product Documentation Link Cannot Be Displayed. If You Need Technical Documentation, Please Click “Geekstory”To Em-Ail Us..
Documentation You Can Find At The Bottom Of The Details Page - Product Guides And Documents: (User Manual (Pdf), Which Contains Details On How To Use And Links To The Drivers..
This Usb Gps Receiver Has A Cable Length Of 2 Meters, Bottom With Magnet Adsorption, Bn-808 Usb Gps Module Has 4M Flash To Save The Configuration. So You Don't Need To Reset The Data When You Use It Next Time.
Bn-808 Usb Gps Receiver Uses The Latest Eighth Generation Chip (M8030-Kt). The Receiving Format: Gps, Glonass, Bds, Galileo, Sbas And Qzss. Default Gps+Glonass+Sbas+Qzss Combined Positioning. If You Need High Accuracy, It Is Recommended To Use Gps+Glonass+Sbas+Qzss+Galileo Or Gps+Bds+Sbas+Qzss+Galileo Combined Positioning Mode, And Have 72 Searching Channel; Frequency: Gps L1，Glonass L1，Beidou B1，Sbas L1，Galileo E1.
Features
- BN-808 USB GPS Module support windows and linux system, not for android and IOS system.
- BN-808 USB GPS receiver uses the latest eighth generation chip (M8030-KT). The Receiving Format: GPS, GLONASS, BDS, GALILEO, SBAS and QZSS. default GPS+GLONASS+SBAS+QZSS combined positioning. If you need high accuracy, it is recommended to use GPS+GLONASS+SBAS+QZSS+GALILEO or GPS+BDS+SBAS+QZSS+GALILEO combined positioning mode, and have 72 Searching Channel; Frequency: GPS L1 GLONASS L1 BeiDou B1 SBAS L1 Galileo E1
- You need to install the driver to use BN-808 USB GPS Module on Windows system, but it is plug and play on Linux system
- This usb GPS receiver has a cable length of 2 meters, Bottom with magnet adsorption, BN-808 USB GPS Module has 4M flash to save the configuration. So you don't need to reset the data when you use it next time
- The product documentation link cannot be displayed. If you need technical documentation, please click Geekstory to em-ail us.
- Documentation you can find at the bottom of the details page - Product guides and documents: (User Manual (PDF), which contains details on how to use and links to the drivers.
- Drive link: https(:)//tinyurl.com/gps-module-manual
- See more on Amazon...
Brand: Geekstory | Manufacturer: Geekstory
Warranty: Six months
See On Amazon #7
Geekstory 4 PCS 915MHz LoRa Antenna U.FL IPEX to SMA Connector Antenna for Lora Board ESP32 OLED CubeCell Board IOT
Asin: B0BXWX9DF4
Feature: Connector Type: Ipex; Band Definition: 915Mhz; Standing Wave Ratio: <= 1.5; Gain: 2Dbi; Maximum Power: 10W; Input Impedance: 50Ω.
If You Have Any Questions About This Product, Please Click ''Geekstory'' To Em-Ail Us..
You Will Get 4 Pcs Lora Antenna.
Connector Type: The Lora Antenna U.Fl Ipex To Sma Connector Is A Cable Assembly That Includes A Lora Antenna With A U.Fl Ipex Connector On One End And An Sma Connector On The Other End. The U.Fl Ipex Connector Is Used To Connect The Antenna To A Wireless Module, And The Sma Connector Is Used To Connect The Cable Assembly To An Rf Device. Band Definition: 915Mhz.
Features
- LoRa Antenna: 915 lora antenna is good for LoRa end devices for the 915mhz band. widely used with 915mhz cubecell board, htcc-ab02s lora gps, LoRa32u4 II etc; and in academic research projects that require wireless communication.
- Connector Type: The LoRa Antenna U.FL IPEX to SMA Connector is a cable assembly that includes a LoRa antenna with a U.FL IPEX connector on one end and an SMA connector on the other end. The U.FL IPEX connector is used to connect the antenna to a wireless module, and the SMA connector is used to connect the cable assembly to an RF device. Band definition: 915MHz
- Feature: Connector type: ipex; Band definition: 915MHz; Standing wave ratio: <= 1.5; Gain: 2dBi; Maximum power: 10W; Input impedance: 50
- You will get 4 PCS Lora antenna
- If you have any questions about this product, please click ''Geekstory'' to em-ail us.
- See more on Amazon...
Brand: Geekstory | Manufacturer: Geekstory
Warranty: Six months
See On Amazon #8
Geekstory 2 PCS GT-U7 GPS Module GPS Receiver Navigation Satellite Positioning NEO-6M with 6M 51 Microcontroller STM32 R3+IPEX Active GPS Antenna High Sensitivity for Arduino Drone Raspberry Pi Flight
Asin: B0B5WCV38H
Gt-U7 Gps Module With A Usb Interface, You Can Directly Use The Phone Data Cable On The Computer Point Of View Positioning Effect. Usb Directly Connected To The Computer, That Is, With The Host Computer-Owned Serial Port Function, No Need For External Serial Module, Ipx Interface Active Antenna Included In The Package!.
If You Have Any Questions About Using Our Products, Such As Needing Technical Documentation For A Product Please Feel Free To Contact Us (Please Click On "Geekstory" You Can Find "Sold By Geekstory" Under The Buy Now Button, Click On "Ask A Question" In The New Page To Send Us An Email.) We Will Try Our Best To Help You Out.
Operating Voltage: 3.6V-5V (Or Direct Usb Power Supply), Operating Baud Rate: 9600 (Can Be Modified). Application: Vehicle-Mounted, Handheld Devices Such As Pdas, Vehicle Monitoring, Mobile Phones, Camcorders And Other Mobile Positioning Systems.
Gt-U7 Module, With High Sensitivity, Low Power Consumption, Miniaturization, Its Extremely High Tracking Sensitivity Greatly Expanded Its Positioning Of The Coverage. Such As Narrow Urban Sky, Dense Jungle Environment, Gt-U7 Can Be High-Precision Positioning.
Features
- GT-U7 main module GPS module using the original 7th generation chip, Software is compatible with NEO -6M
- GT-U7 module, with high sensitivity, low power consumption, miniaturization, its extremely high tracking sensitivity greatly expanded its positioning of the coverage. such as narrow urban sky, dense jungle environment, GT-U7 can be high-precision positioning
- GT-U7 GPS Module with a USB interface, you can directly use the phone data cable on the computer point of view positioning effect. USB directly connected to the computer, That is, with the host computer-owned serial port function, no need for external serial module, IPX interface active antenna included in the package!
- Operating voltage: 3.6V-5V (or direct usb power supply), Operating baud rate: 9600 (can be modified). Application: Vehicle-mounted, Handheld devices such as PDAs, Vehicle monitoring, Mobile phones, camcorders and other mobile positioning systems
- If you have any questions about using our products, such as needing technical documentation for a product please feel free to contact us (please click on Geekstory you can find Sold by Geekstory under the Buy Now button, click on Ask a question in the new page to send us an email.) We will try our best to help you out
- See more on Amazon...
Brand: Geekstory | Manufacturer: Geekstory
Warranty: Six months
See On Amazon #9
Geekstory G72 G-Mouse USB GPS Dongle Glonass Beidou GNSS Receiver Module for Raspberry Pi Linux Window Geekstory, Better Than vk-172 GPS
Asin: B07SMRXSC8 | Model: WT3661 | PartNumber: WT3661 | Ean: 0747356634083 | UPC: 747356634083
You Need To Install Driver Before Use It On Window, But Plug And Play For Raspberry Pi And Linux. If You Need Some Driver Links And Using Videos For G72 Gps Usb, Please Contact Us..
Documentation You Can Find At The Bottom Of The Details Page - Product Guides And Documents: (User Manual (Pdf), Which Contains Details On How To Use And Links To The Drivers..
1 X Usb Gps Receiver Module, The Product Dimensions: 60X24x9mm. Update Frequency: 1~10Hz, Baud Rate: 4800, 9600, 19200, 38400, 57600, 115200Bps.
The Device Defaults To Gps+Beidou, Gps+Glonass Needs To Send Instructions To Change..
Features
- G72 gps usb use the newer chip(M8130-KT Chip), better than vk-172 gps.This usb gps works with Windows, Raspberry pi, Linux and Google Earth, not for iOS Android system.
- The device defaults to GPS+Beidou, GPS+Glonass needs to send instructions to change.
- You need to install driver before use it on window, but plug and play for raspberry pi and Linux. If you need some driver links and using videos for G72 gps usb, Please contact us.
- 1 X USB GPS Receiver Module, the product dimensions: 60X24X9mm. Update frequency: 1~10Hz, Baud rate: 4800, 9600, 19200, 38400, 57600, 115200bps
- Documentation you can find at the bottom of the details page - Product guides and documents: (User Manual (PDF), which contains details on how to use and links to the drivers.
- See more on Amazon...
Brand: Geekstory | Manufacturer: Geekstory
Dimensions: 0.79 x 2.36 x 1.18 inches | Weight: 0.02 pounds
See On Amazon #10
Geekstory 5 PCS Micro SD Card Module Mini TF Card Adapter with Memory Storage Breakout Board SPI Interface Driver + 40 PCS Female to Male Dupont Cable Line for Arduino Raspberry Pi
Asin: B07X478BPL
★Positioning Holes: 4 M2 Screws Positioning Holes With A Diameter Of 2.2Mm, So The Module Is Easy To Install Positioning, To Achieve Inter-Module Combination.
★The Product Documentation Link Cannot Be Displayed. If You Need Technical Documentation, Please Click “Geekstory” To Con.Tact Us.
★You Can Get 5 X Sd Card + 20Cm 40 Pcs Female To Male Dupont Cable Line. Function: Spi Reader Mini Sd Memory Card Tf Memory Card Shield Module For Arduino.
★On-Board Level Shifting Circuit, Interface Level Can Be 5V. Power Supply Is 5V, Onboard 5V Regulator Circuit. Communication Interface Is Standard Spi Interface.
Features
- Support Micro SD card, Micro SDHC card (high speed card). The module (MicroSD Card Adapter) is a Micro SD card reader module, through the file system and SPI interface driver, the MCU system can completethe reading and writing of files in the MicroSD card
- On-board level shifting circuit, interface level can be 5V. Power supply is 5V, onboard 5V regulator circuit. Communication interface is standard SPI interface
- Positioning holes: 4 M2 screws positioning holes with a diameter of 2.2mm, so the module is easy to install positioning, to achieve inter-module combination
- You can get 5 x SD card + 20cm 40 PCS Female to Male Dupont Cable Line. Function: SPI Reader mini SD Memory Card TF Memory Card Shield Module for Arduino
- The product documentation link cannot be displayed. If you need technical documentation, Please click Geekstory to con.tact us
- See more on Amazon...
Brand: Geekstory | Manufacturer: Geekstory
Dimensions: 0.40 x 1.60 x 0.80 inches
See On Amazon #11
Geekstory 20kg Digital Load Cell Weight Sensor HX711 AD Converter Breakout Module Weight Sensor Module Kit DIY Portable Electronic Kitchen Scale for Arduino Raspberry Pi
Asin: B0B6NRW8GG | Model: No | PartNumber: No
You Can Get: 1 X 20Kg Load Cell; 1 X Hx711 Ad Module; 1 X Dupont Cable Set; 1 X Acrylic Disc; 5 X Nylon Guide Column; 2 X M3 *10 Screws.
If You Need Technical Documentation, Please Click “Ask A Question”.
On-Chip Active Low Noise Pga With Selectable Gain Of 3264 And 128.
You Need To Connect Load Cell Wtih Hx711 Module Like This, Red To E+, Black To E-, Green To A+, White To A-.
Features
- This HX711 module uses 24 high precision A/D converter chip hx711. It is a specially designed for the high precision electronic scale designwith two analog input channelthe internal integration of 128 times the programmable gain amplifier.
- You need to connect load cell wtih HX711 module like this, Red to E+, Black to E-, Green to A+, White to A-
- You can get: 1 X 20KG Load Cell; 1 X HX711 AD Module; 1 X Dupont Cable Set; 1 X Acrylic Disc; 5 X Nylon Guide Column; 2 X M3 *10 Screws
- On-chip active low noise PGA with selectable gain of 3264 and 128
- If you need technical documentation, Please click Ask a question
- See more on Amazon...
Brand: Geekstory | Manufacturer: Geekstory
See On Amazon #12
Geekstory ESP8266 ESP-01 Serial WiFi Wireless Adapter Module DC3.3V 5V ESP01 Breakout PCB Adapters Compatible for Arduino Pack of 5pcs
Asin: B09C8CV885
3.3V Voltage Regulator Circuit And Onboard Level Conversion Circuit Can Make 5V Microcontroller Easy To Use With Esp-01 Wi-Fi Module..
How To Email Us：Please Click “Geekstory”(You Can Find "Sold By Geekstory" Under Buy Now Button), In The New Page, Click “Ask A Question”.
Working Voltage: 4.5~5.5V (On-Board 3.3V Ldo Regulator) Interface Logic Voltage: 3.3V / 5V Compatible(On-Board Level Shift Circuit).
The Wifi Adapter Module Has Super Fast Response, Strong Anti-Interference Ability And High Cost Performance..
Features
- PACKAGE You will get 5pcs ESP-01 Adapter Module
- The WiFi adapter module has super fast response, strong anti-interference ability and high cost performance.
- 3.3V voltage regulator circuit and onboard level conversion circuit can make 5V microcontroller easy to use with ESP-01 Wi-Fi module.
- Working voltage: 4.5~5.5V (On-board 3.3V LDO Regulator) Interface logic voltage: 3.3V / 5V compatible(On-board level shift circuit)
- How to email us Please click Geekstory (you can find Sold by Geekstory under Buy Now button), in the new page, click Ask a question
- See more on Amazon...
Brand: Geekstory | Manufacturer: Geekstory
See On Amazon #13
Geekstory BE-880Q GPS Module with Flash QMC5883L Compass GPS Antenna TTL Level 38400bps for Arduino Raspberry Pi Aircraft Pixhawk APM Flight Controller
Asin: B0BV5RFRGD | Model: GR6065 | PartNumber: GR6065
When You Use It For Raspberry Pi, There Is No Driver Needed. Here Is Connection With Rpi, Red To 3.3V, Black To Gnd, Green To Txd White To Rxd. The Blue (Tx) Light Flashes When Power On, Indicating There Is Data Output..
Baud Rate : 4800Bps To 921600Bps, Default 38400Bps. You Can Set The Baud Rate You Need In This Range According To Your Needs..
Dits Data Level Is Ttl Or Rs-232, Default Ttl Level. To Make It Be Rs232 Output, You Need To Use One Ttl To Rs232 Converter Cable..
Be 880Q Gps Module Has Flash To Save Configuration. So You Do Not Need To Reset Next Time When You Use It.
Features
- This BE-880Q GPS Module using the latest 10th generation chip. BE-880 gps module is dual module compass, with and electronic compass IC QMC5883L
- BE 880Q gps module has flash to save configuration. So you do not need to reset next time when you use it
- When you use it for Raspberry Pi, there is no driver needed. Here is connection with RPi, red to 3.3v, black to GND, green to TXD white to RXD. The blue (TX) light flashes when power on, indicating there is data output.
- DIts data Level is TTL or RS-232, Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable.
- Baud Rate : 4800bps to 921600bps, Default 38400bps. You can set the baud rate you need in this range according to your needs.
- See more on Amazon...
Brand: Geekstory | Manufacturer: Geekstory
Dimensions: 0.39 x 1.18 x 1.18 Inches
Warranty: Six Months
See On Amazon #14
Geekstory BN-220 Dual GPS Glonass Module Navigation TTL Level 9600bps + GPS Passive Antenna for Arduino Raspberry Pi Pixhawk F3 CC3D Betaflight F4 Flight Control
Asin: B07PRDY6DS | Ean: 0747356629621 | UPC: 747356629621
The Tx Led Flash Means Gps Module Output Normally.The Pps Led Flash Means Gps Module Locate Your Place..
Bn 220 Gps Module Documentation Link Cannot Be Displayed. If You Need Technical Documentation, Please Click “Ask A Question” To Em-Ail Us.
Data Level : Ttl Or Rs-232,Default Ttl Level. To Make It Be Rs232 Output, You Need To Use One Ttl To Rs232 Converter Cable.
When You Use It For Raspberry Pi, There Is No Driver Needed But You Need To Install Software.
Features
- BN-220 gps module has flash to save configuration, so you do not need to reset data next time when you use it. But it has no compass. If you need gps with flash and compass, please buy bn-880 from Geekstory.
- When you use it for Raspberry Pi, there is no driver needed but you need to install software
- The TX LED flash means gps module output normally.The PPS LED flash means gps module locate your place.
- Data Level : TTL or RS-232,Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable
- BN 220 gps module documentation link cannot be displayed. If you need technical documentation, please click Ask a question to em-ail us
- See more on Amazon...
Brand: Geekstory | Manufacturer: Geekstory
Dimensions: 0.87 x 0.79 x 0.79 Inches | Weight: 0.01 Pounds
See On Amazon #15
Geekstory BMP390 Precision Barometric Pressure and Altimeter Sensor Upgrade Version for BMP280 BMP388 I2C SPI Interface+SH1.0mm 4P Cable Pack of 2pcs
Asin: B09CMJ9FJL | Model: GR0097X2+GR0097-CX2 | PartNumber: GR0097X2+GR0097-CX2
Upgrade：It Is Is The Upgrade To The Bmp280 And Bmp388 - With A Low-Altitude Noise As Low As 0.1M And The Same Fast Conversion Time..
Contact Us： Please Click "Geekstory" (You Can Find "Sold By Geekstory" Under Buy Now Button), In The New Page, Click "Ask A Question" To Email Us.
Range：This Sensor Has A Relative Accuracy Of ±3 Pascals, Which Translates To About ±0.25 Meters Of Altitude (Compare To The Bmp280's ±12 Pascal/±1 Meter And Bmp388's ±8 Pascal/±0.5 Meter)..
Highlight：The Bmp390 Has Better Precision Than Ever, Which Makes It Excellent For Environmental Sensing Or As A Precision Altimeter. It Can Even Be Used In Either I2c And Spi Configurations..
Features
- PACKAGE You will get 2pcs BMP390 Sensor+4pcs SH1.0mm 4P Cable
- HIGHLIGHT The BMP390 has better precision than ever, which makes it excellent for environmental sensing or as a precision altimeter. It can even be used in either I2C and SPI configurations.
- UPGRADE It is is the upgrade to the BMP280 and BMP388 - with a low-altitude noise as low as 0.1m and the same fast conversion time.
- RANGE This sensor has a relative accuracy of 3 Pascals, which translates to about 0.25 meters of altitude (compare to the BMP280's 12 Pascal/ 1 meter and BMP388's 8 Pascal/ 0.5 meter).
- CONTACT US Please click Geekstory (you can find Sold by Geekstory under Buy Now button), in the new page, click Ask a question to email us
- See more on Amazon...
Brand: Geekstory | Manufacturer: Geekstory
See On Amazon #16
Geekstory 915MHZ ESP32 LoRa Development Board V3 SX1262 ESP32 LoRa V3 with OLED Display Type-C + LoRa 32 V3 Housing for Arduino LoraWan IOT Internet, not Compatible with LoRa V2
Asin: B0CYSSZMSR
-Type-C Usb Interface With Full Voltage Regulator, Esd Protection, Short Circuit Protection, Rf Shielding And Other Protection Measures. Integrated Sh1.25-2 Battery Interface, Integrated Lithium Battery Management System. Integrated Cp2102 Usb-To-Serial Interface Chip..
-If You Have Any Question, Please Confirm It With Geekstory As Follows: Click "Geekstory" (You Can Find "Sold By Geekstory" Under Buy Now Button), In The New Page, Click "Ask A Question"..
-This 915Mhz Lora Board Comes Unassembled, Soldering Is Required For You, Not Equipped With Lithium Battery. You Can Power 915 Lora Board Via 3.7V Lithium Battery, 3.3V / 5V Pin, Or On-Board Type C 5V. To Make It Work Better, 5V Type C Power Is Recommended..
-Microprocessor: Esp32-S3fn8 Dual-Core Processor With A Frequency Of Up To 240 Mhz. Sx1262 Lora Node Chip..
Features
- -You will receive, 1pcs 863-928MHz esp32 lora V3 + 1pcs 915mhz lora antenna + 1pcs 2pin 1.25mm cable. (This antenna can be used with the Lora case. If you need a Lora V3 case, you can buy it from "Geekstory").
- -Microprocessor: ESP32-S3FN8 dual-core processor with a frequency of up to 240 MHz. SX1262 LoRa node chip.
- -Type-C USB interface with full voltage regulator, ESD protection, short circuit protection, RF shielding and other protection measures. Integrated SH1.25-2 battery interface, integrated lithium battery management system. Integrated CP2102 USB-to-serial interface chip.
- -This 915MHz LoRa board comes unassembled, soldering is required for you, not equipped with lithium battery. You can power 915 lora board via 3.7V lithium battery, 3.3V / 5V pin, or on-board type C 5V. To make it work better, 5V type C power is recommended.
- -If you have any question, please confirm it with Geekstory as follows: Click Geekstory (you can find Sold by Geekstory under Buy Now button), in the new page, click Ask a question.
- See more on Amazon...
Brand: Geekstory | Manufacturer: Geekstory
Warranty: Six Months
See On Amazon #17
Geekstory Battery Holder - 5 PCS 3V AAA Battery Case Cover Storage Box with ON/Off Switch and Wire Leads PH2.0 JST Connector Male for BBC Micro:bit Arduino
Asin: B088JY8FWC
It Is Suitable For Diy And Maintenance Of All Kinds Of Dc Equipment, With Screw Hole At The Bottom And Wire Preinstalled, It Is Easy To Use..
If You Have Any Problem And Document Information, Please Click "Ask A Question" To Em-Ail Us.
5 Pcs 2 Aaa Battery Holder With Wire Leads; Each Battery Holder Comes With A Case Cover For Keeping The Battery In Place, Interface: Ph2.0. Cable Length: About 14Cm / 5.5Inch. The Cable Line Can Be Adjusted To Your Needs.
Microbit Battery Pack Switch Function: Aaa Battery Holder With On/Off Switch ; Recessed Designed On-Off Switch, More Safe, More Durable, Allows You To Easily Turn Lights On Or Off In The Various Rooms.
Features
- Designed for AAA battery and comes without batteries, and it's compatible with BBC Micro:bit board. The plastic cover is sturdy and grips the batteries well, It is very convenient to install and replace the battery.
- Microbit battery pack switch function: AAA battery holder with ON/OFF switch ; Recessed designed On-Off Switch, more safe, more durable, allows you to easily turn lights on or off in the various rooms
- It is suitable for DIY and maintenance of all kinds of dc equipment, with screw hole at the bottom and wire preinstalled, it is easy to use.
- 5 PCS 2 AAA battery holder with wire leads; Each battery holder comes with a case cover for keeping the battery in place, Interface: PH2.0. Cable length: About 14cm / 5.5inch. The cable line can be adjusted to your needs
- If you have any problem and document Information, please click Ask a question to em-ail us
- See more on Amazon...
Brand: Geekstory | Manufacturer: Geekstory
See On Amazon #18
Geekstory 28db Active GPS Antenna Ceramic Antenna 25x25x8mm IPEX Antenna 1575.42MHz
Asin: B0D267W4RT
Dc 3V - 5V Voltage, 10Ma Power.
If You Need Any Gps Module, Please Confirm It With Me By Message.
Built-In Ceramic Active Antenna.
Product Size：25*25*8Mm; Cable: 10Cm. Ipex Connector.
Features
- With Center Frequency 1575.42MHZ
- Product Size 25*25*8mm; Cable: 10cm. IPEX Connector
- DC 3V - 5V voltage, 10mA power
- Built-in ceramic active antenna
- If you need any gps module, please confirm it with me by message
- See more on Amazon...
Brand: Geekstory | Manufacturer: Geekstory
Warranty: Six Months
See On Amazon #19
Geekstory 2PCS VK-162 G-Mouse USB GPS Dongle Navigation Module External GPS Antenna Remote Mount USB GPS Receiver for Raspberry Pi Support Google Earth Window Linux
Asin: B0B6P2TGMN
You Can Get 2 X Vk-162 Gps Receiver. The Cable Length Is 190Cm. The Usb Gps Is A Great, Easy, And An Awesome Solution For Travelers.It Works Anywhere Around The World. After You Download The Maps For The Country Traveling, It Will Pin Point Exactly Where You Are Without Having To Pay Any Service..
Document Link: Https://Tinyurl.Com/Usb-Gps-Module.
This Usb Gps Can Be Used For Mac Computer, But It Requires Very Professional Technical Skills..
Documentation You Can Find At The Bottom Of The Details Page - Product Guides And Documents: (User Manual (Pdf), Which Contains Details On How To Use And Links To The Drivers..
It Is A Magntized Antenna,If Get The Gps Signal,Please Use The Gps Module Outdoor,If You Want To Use The Gps Module Indoor,Please Install Gps Signal Amplifier In Your Room.
If You Have Any Issue When Using Our Product,Or You Need Product Use Documentation, Please Click “Geekstory”, Click “Ask A Question” To Em-Ail Us.
Features
- VK-162 GPS support windows and linux system, not for android and IOS system. It is NOT plug and play for most device. You must install driver before make it work.
- If you have any issue when using our product,or you need product use documentation, please click Geekstory , click Ask a question to em-ail us
- You can get 2 x VK-162 GPS Receiver. The cable length is 190cm. The USB GPS is a great, easy, and an awesome solution for travelers.It works anywhere around the world. After you download the maps for the country traveling, it will pin point exactly where you are without having to pay any service.
- It is a magntized antenna,if get the GPS signal,please use the GPS module outdoor,If you want to use the GPS module indoor,please install GPS signal amplifier in your room
- This usb gps can be used for mac computer, but it requires very professional technical skills.
- Documentation you can find at the bottom of the details page - Product guides and documents: (User Manual (PDF), which contains details on how to use and links to the drivers.
- Document link: https://tinyurl.com/usb-gps-module
- See more on Amazon...
Brand: Geekstory | Manufacturer: Geekstory
Dimensions: 1.38 x 6.50 x 3.86 inches
See On Amazon #20
Geekstory VK-172 Gmouse USB GPS Glonass Dongle Module Support an-dorid Linux Windows 10/8/7/vista/XP/Raspberry Pi
Asin: B078Y597M6 | Model: FZ1007 | PartNumber: FZ1007 | Ean: 0702795763985 | UPC: 702795763985
The Default Output Is The Product Gps Protocol Data. You Can Test The Software Or Serial Commands To Modify Switch Gps/Glonass Protocol Data.
The Product Documentation Link Cannot Be Displayed. If You Need Technical Documentation, Please Click “Geekstory” To Em-Ail Us..
Documentation You Can Find At The Bottom Of The Details Page - Product Guides And Documents: (User Manual (Pdf), Which Contains Details On How To Use And Links To The Drivers..
Vk-172 Automatically Adapt The Baud Rate. The Baud Rate Has Any Data Output.
Vk-172 Gps Is Not Plug And Play For Most Device. You Need To Install Driver Before Make It Work. Raspberry Pi And Linux No Need Driver. (Drivers And Links To Documentation You Can Find On The Details Page Of The User Manual.).
Features
- VK 172 USB GPS works with Windows, Android, Linux, Raspberry PI and Google Earth, not for IOS system
- VK-172 gps is NOT plug and play for most device. You need to install driver before make it work. Raspberry Pi and linux no need driver. (Drivers and links to documentation you can find on the details page of the user manual.)
- The default output is the product GPS protocol data. You can test the software or serial commands to modify switch GPS/GLONASS protocol data
- VK-172 automatically adapt the baud rate. The baud rate has any data output
- The product documentation link cannot be displayed. If you need technical documentation, please click Geekstory to em-ail us.
- Documentation you can find at the bottom of the details page - Product guides and documents: (User Manual (PDF), which contains details on how to use and links to the drivers.
- See more on Amazon...
Brand: Geekstory | Manufacturer: Geekstory
See On Amazon #21
Geekstory 1 Channel 5V Relay Module Relay Switch with High Low Level Trigger Expansion Board Relay Control Boards SRD-05VDC-SL-C with 20CM 20Pin Dupont Cable for Arduino (5PCS)
Asin: B08R8TMT73
★ 5V - 12 V Control Signal Of The Ttl. Control Dc Or Ac Signals Can Control The 220V Ac Load.
★Increased Transistor Drive A Relay Coil, The Control Pin High Impedance. Control Pins Have Pull-Down Circuit, To Prevent Floating Relay Malfunction.
★ Humanized Interface Design, All Interfaces Can Be Drawn Out Through Direct Connection Terminals, Which Is Very Convenient. No Need To Buy The Jumper Wires Extra, This Set Contains 20Cm 20Pin Female To Female, Female To Male, Male To Male Dupont Jumper Wires, With Which You Can Easier To Complete The Project..
★ The Relay Module Can Directly Control A Variety Of Equipment And Loads, Which Meets International Safety Standards, And Also Has Power And Relay Indicators..
Features
- This relay module can be used not only as a microcontroller development board module, but also as a home appliance controller.
- The relay module can directly control a variety of equipment and loads, which meets international safety standards, and also has power and relay indicators.
- 5V - 12 V control signal of the TTL. Control DC or AC signals can control the 220V AC Load
- Humanized interface design, all interfaces can be drawn out through direct connection terminals, which is very convenient. No need to buy the Jumper Wires extra, this set contains 20cm 20Pin female to female, female to male, male to male Dupont Jumper Wires, with which you can easier to complete the project.
- Increased transistor drive a relay coil, the control pin high impedance. Control pins have pull-down circuit, to prevent floating relay malfunction
- See more on Amazon...
Brand: Geekstory | Manufacturer: Geekstory
See On Amazon #22
Geekstory for ATMEL 51 AVR USB ISP ASP Microcontroller Programmer Downloader with Cable + 10Pin to 6Pin Adapter Board for Ender 3 or Ender 3 Pro(Pack of 2)
Asin: B0CD7M4KQV | Model: GR0151X2+GR3382X2 | PartNumber: GR0151X2+GR3382X2
*Reserved Mosi, Miso, Ret, Sck, Vcc, Gnd. 6Pin Interface, User-Friendly Connection To The Target Board..
*The Avr Usb Isp Asp Microcontroller Documentation Link Cannot Be Displayed. If You Need Technical Documentation, Please Click “Geekstory”(You Can Find "Sold By Geekstory" Under Buy Now Button), In The New Page, Click “Ask A Question” To Em-Ail Us..
*This Usbasp Programmer Only Supports Windows System. It Can Be Directly Connected To The Usb Interface Of The Computer, Which Is Very Convenient To Use. Driver Installation Is Required To Start The Usb To Isp..
*Set Programming Programming Interface, The User Can Upgrade The Downloader Firmware, Programming Is Very Convenient. This Product Can Be Used To Update Ender 3 Or Ender 3 Pro Firmware. Usp-Asp Support For Programming Chip: 51 Series: At89s51, At89s52, At89s53, At89s8252..
Features
- *This USBASP Programmer is using onboard ATMega8 chip. With power and programming two lights, the target board suopports 5V and 3.3V power supply New self-adaptive automatic speed control, the asp is the new version, with pin on JP2.
- *Set PROGRAMMING programming interface, the user can upgrade the downloader firmware, programming is very convenient. This product can be used to update Ender 3 or Ender 3 Pro firmware. USP-ASP support for programming chip: 51 Series: AT89S51, AT89S52, AT89S53, AT89S8252.
- *Reserved MOSI, MISO, RET, SCK, VCC, GND. 6PIN interface, user-friendly connection to the target board.
- *This USBASP Programmer only supports WINDOWS system. It can be directly connected to the USB interface of the computer, which is very convenient to use. Driver installation is required to start the usb to isp.
- *The AVR USB ISP ASP Microcontroller documentation link cannot be displayed. If you need technical documentation, please click Geekstory (you can find Sold by Geekstory under Buy Now button), in the new page, click Ask a question to em-ail us.
- See more on Amazon...
Brand: Geekstory | Manufacturer: Geekstory
See On Amazon #23
Geekstory Marine GPS Antenna Boat Ship Yacht Navigation External Receiver SMA Male 96 * 126mm Wire Length 3 Meters for Garmin, Transducers Fishfinder
Asin: B0CTCD232W
The Marine Antenna Is Compatible With Boat Ship Marine Gps Navigation System; Fishfinder Sounder With Bnc And Tnc Male Connector; Gps Receivers, And Other Portable Devices..
Please Click “Geekstory”(You Can Find ""Sold By Geekstory" Under Buy Now Button), In The New Page, Click “Ask A Question” To Con.Tact Us.
5 Meters (16.4 Feet) In Cable Length Provide Sufficient Length Between The Gps Antenna And The Device It Is Connected To. High Gain, This High Quality Antenna Improves The Signal Strength And Accuracy Of Gps And Bds Positioning Information..
Antenna Size (Mm): 96*126; Low Noise Amplifier Active Gain: 24.5Dbi / Maximum; Impedance: 50 Ω; Polarization: Rhcp (Right-Hand Circular Polarization); Center Frequency (Mhz): L1 (1575.42±1.023Mhz).
Features
- Antenna Size (mm): 96*126; Low Noise Amplifier Active Gain: 24.5dBi / Maximum; Impedance: 50 ; Polarization: RHCP (Right-Hand Circular Polarization); Center Frequency (MHz): L1 (1575.42 1.023MHz)
- Antenna Size (mm): 96*126; Low Noise Amplifier Active Gain: 24.5dBi / Maximum; Impedance: 50 ; Polarization: RHCP (Right-Hand Circular Polarization); Center Frequency (MHz): L1 (1575.42 1.023MHz)
- The marine antenna is compatible with Boat Ship Marine GPS Navigation System; Fishfinder Sounder with BNC and TNC male connector; GPS receivers, and other portable devices.
- 5 meters (16.4 feet) in cable length Provide sufficient length between the gps antenna and the device it is connected to. High gain, this high quality antenna improves the signal strength and accuracy of GPS and BDS positioning information.
- Please click Geekstory (you can find Sold by Geekstory under Buy Now button), in the new page, click Ask a question to con.tact us
- See more on Amazon...
Brand: Geekstory | Manufacturer: Geekstory
Warranty: Six Months
See On Amazon #24
BN-180 GPS Module UART TTL Dual Glonass GPS Car Navigation with GPS Antenna for Arduino Raspberry Pi Pixhawk Aircraft CC3D F3 Flight Controller Geekstory
Asin: B078Y4XZN9 | Model: FZ2917 | PartNumber: FZ2917 | Ean: 0702795764029 | UPC: 702795764029
Data Level : Ttl Or Rs-232, Default Ttl Level. To Make It Be Rs232 Output, You Need To Use One Ttl To Rs232 Converter Cable..
What You Will Get: 1 X Bn-180 Gps Module.
This Bn-180 Gps Module Does Not Have Flash And Cannot Be Saved. 72 Searching Channel Support Rate : 4800Bps To 921600Bps, Default 9600Bps..
The Tx Led Flash Means Gps Module Output Normally. The Pps Led Flash Means Gps Module Locate Your Place..
Features
- This BN-180 GPS Module can show your speed. When you use it for Raspberry Pi, there is no driver needed. Here is connection with RPi, red to 3.3v, black to gnd, green to txd, white to rxd.
- The TX LED flash means gps module output normally. The PPS LED flash means gps module locate your place.
- Data Level : TTL or RS-232, Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable.
- This BN-180 GPS Module does not have FLASH and cannot be saved. 72 Searching Channel Support Rate : 4800bps to 921600bps, Default 9600bps.
- What you will get: 1 X BN-180 GPS Module
- See more on Amazon...
Brand: Geekstory | Manufacturer: Geekstory
Dimensions: 0.35 x 2.72 x 1.81 Inches
See On Amazon #25
Geekstory GSM Antenna 900-1800MHz Dual Band Mobile Signal Booster Outdoor Suction Cup Antennas 3M Meters SMA Connector Male for Car Truck Boat
Asin: B0BRPVM93T
It Also Helps Prevent Dropped Calls..
It Can Also Work For Multiple Users At The Same Time..
It Doesn't Require A Direct Connection To Your Phone, But Rather Works Wirelessly..
It Improves Cell Phone Voice And Data Reception, Adding Bars Of Signal To Your Phone And Increased Data Transfer Speeds..
Features
- This antenna is suitable for cars, trucks, boats or other vehicle use.
- It improves cell phone voice and data reception, adding bars of signal to your phone and increased data transfer speeds.
- It also helps prevent dropped calls.
- It doesn't require a direct connection to your phone, but rather works wirelessly.
- It can also work for multiple users at the same time.
- See more on Amazon...
Brand: Geekstory | Manufacturer: Geekstory
Warranty: Six Months
See On Amazon #26
Geekstory TV Antenna, Portable TV Antenna Indoor, Tv Antenna for Local Channels Tv Digital HD for Smart TV Support 4K 1080p with Signal Booster-Reach up to 980 Miles Support All TV
Asin: B0CNBNKZJD
【Easy To Install】Simply Plug The Coaxial Cable From Your Digital Indoor Hdtv Antenna Into The Ant/In Connector On The Back Of Your Tv And Enjoy Hd Home Entertainment In Seconds! Point The Tv Antenna In The Direction Of Your Local Tv Tower And Scan For Channels. The Antenna Comes With A Strong Adhesive Backing So You Can Mount It Wherever You Need It. Creative Patterned Design Adds Beauty. Or You Could Place It Beside Your Tv, Router, Or Digital Adapter.
【Service】If You Have Any Questions About Our Digital Tv Antennas, Please Do Not Hesitate To Contact Us. We Provide Technical Support As Well As Your Various Queries.
【Note】Please Carefully Read The Manual Before Installation. Always Remember Re-Scan For Channels After Moving The Antenna.
【Application】Antenna Panel Size: 210Mm*120Mm; Antenna Cable Length: 300Mm; Amplifier Cable Length: 70Mm. You Can Use The Antenna In Your Bedroom, Living Room, Game Room, Trailer, Truck, Rv, Or Tent, And In Any Other Scenario You Need. This Antenna Has A Strong Signal For Stress-Free Indoor Use; And No Pixelation.
【Long Range】This Television Antennas That Transmit Signals Over Distances Of Up To 980 Miles. Updated Amplifier Signal Booster With Advanced Smart Chip. It Can Better Optimize The Signal Transmission, Provide A Larger Reception Range, And Maximize The Reception Of Signals From More Channels; Can Be Placed Almost Everywhere At Home.
Features
- HD TV Antenna The best antenna for local channels and live news stations!!! This antenna can receive hundreds of HD TV channels, like ABC, CBS, NBC, PBC, Fox and much more; provides 720p, 1080i, 1080p HDTV signals. Compared to network TV and traditional cable TV, all the programs are free
- Long Range This television antennas that transmit signals over distances of up to 980 miles. Updated Amplifier Signal Booster with advanced smart chip. It can better optimize the signal transmission, provide a larger reception range, and maximize the reception of signals from more channels; can be placed almost everywhere at home
- Easy to Install Simply plug the coaxial cable from your digital indoor HDTV antenna into the ANT/IN connector on the back of your TV and enjoy HD home entertainment in seconds! Point the TV antenna in the direction of your local TV tower and scan for channels. The antenna comes with a strong adhesive backing so you can mount it wherever you need it. Creative patterned design adds beauty. Or you could place it beside your TV, router, or digital adapter
- Application Antenna panel size: 210mm*120mm; Antenna cable length: 300mm; Amplifier cable length: 70mm. You can use the antenna in your bedroom, living room, game room, trailer, truck, RV, or tent, and in any other scenario you need. This antenna has a strong signal for stress-free indoor use; and no pixelation
- Service If you have any questions about our digital TV antennas, please do not hesitate to contact us. We provide technical support as well as your various queries
- Note Please carefully read the manual before installation. Always remember re-scan for channels after moving the antenna
- See more on Amazon...
Brand: Geekstory | Manufacturer: Geekstory
Warranty: Six Months
See On Amazon #27
Geekstory 5PCS HC-SR312 AM312 Mini Pyroelectric Infrared PIR Human Sensor Module Modules Body Motion Automatic Detector DC 2.7 to 12V for Arduino Raspberry Pi
Asin: B08P2PT294 | Model: GR0057 | PartNumber: GR0057
★Repeatable Trigger Mode: After The High Level Of The Sense Output, During The Delay Time Period, If The Human Body Is Active In Its Sensing Range, Its Output Will Remain High Until The Delay After The Person Leaves, Low Level (I.E.: The Sensing Module Automatically Delays A Delay Period After Each Activity Of The Human Body, And The Last Active Time Is The Starting Point Of The Delay Time).
★ How To Email Us? Please Click “Geekstory”(You Can Find "Sold By Geekstory" Under Buy Now Button), In The New Page, Click “Ask A Question” To Email Us.
★ Widely Applications: Security Products, The Human Body Sensors Toys, The Human Body Sensor Lighting, Industrial Automation And Control, Etc..
★It Is A Digital Intelligent Automatic Control Product Based On Passive Human Body Infrared Technology. It Has High Sensitivity And High Reliability And Is Widely Used In Various Automatic Induction Electrical Equipment.
Features
- Low power consumption, small size, easy to install. Module Lens: Small lens. Working voltage: DC 2.7-12V;Static power consumption: <0.1mA;Sensing range: 100 degree cone angle, 3-5 m; (required depending on the lens) Working temperature: -20 to + 60
- It is a digital intelligent automatic control product based on passive human body infrared technology. It has high sensitivity and high reliability and is widely used in various automatic induction electrical equipment
- Repeatable trigger mode: After the high level of the sense output, during the delay time period, if the human body is active in its sensing range, its output will remain high until the delay after the person leaves, Low level (i.e.: the sensing module automatically delays a delay period after each activity of the human body, and the last active time is the starting point of the delay time)
- Widely applications: Security Products, the human body sensors toys, the human body sensor lighting, industrial automation and control, etc.
- How to email us? Please click Geekstory (you can find Sold by Geekstory under Buy Now button), in the new page, click Ask a question to email us
- See more on Amazon...
Brand: Geekstory | Manufacturer: Geekstory
See On Amazon #28
Geekstory Voltage Tester Sensor Measurement Detection Module DC 0-25V Terminal Sensor Module for Arduino UNO Mega Robot Smart Car Geekstory (Pack of 10)
Asin: B07FVVSYYH | Ean: 0747356629485 | UPC: 747356629485
Voltage Input Range: Dc 0 - 25 V, Voltage Analog Resolution: 0.00489V.
Dc Input Connector: Terminal Cathode Connected To Vcc, Gnd Negative Pole .If You Have Any Issue When Using Our Product,Or You Need Product Use Documentation， Please Contact Us Directly For Assistance.We Will Reply Your Problem In 24 Hours.We Try Our Best To Provide The Most Professional Service For Each Customer..
You Can Use It For Raspberry Pi Via Adc But For Need For Programmatical Corrections..
The Voltage Detection Module Detects A Minimum Input Voltage Of 0.00489V × 5 = 0.02445V.
Features
- This voltage tester module is based on a resistive divider principle design, make the interface terminal input voltage reduced 5 times.
- The voltage detection module detects a minimum input voltage of 0.00489V 5 = 0.02445V
- Voltage input range: DC 0 - 25 V, Voltage Analog Resolution: 0.00489V
- You can use it for Raspberry Pi via ADC but for need for programmatical corrections.
- DC input connector: Terminal cathode connected to VCC, GND negative pole .If you have any issue when using our product,or you need product use documentation please contact us directly for assistance.we will reply your problem in 24 hours.We try our best to provide the most professional service for each customer.
- See more on Amazon...
Brand: Geekstory | Manufacturer: Geekstory
See On Amazon #29
Geekstory Dual Band WiFi 2.4GHz 5.8GHz 10dBi RP-SMA Male Antenna 15cm 6inch Universal Antenna Amplifier for WiFi Router Wireless Signal Booster (Pack of 4)
Asin: B0CJY5X3WN
Compatible With: Wireless Network Router, Wifi Ip Security Camera; Wireless Video Surveillance Dvr Recorder; Wifi Signal Booster Repeater, Wifi Range Extender, Fpv Camera Monitor, Wireless Video Transmitter And Receiver, Wireless Hdmi Extender..
Note: Please Confirm Whether The Interface Is Suitable For Your Device Before Purchasing..
You Can Get 4 Pcs 10Dbi Dual Band Antenna. If You Have Any Questions About This Product, You Can Click'' Geekstory'' To Em-Ail Us..
The Antenna Features An Rp-Sma Male Connector, Which Is A Common Connector Used In Many Wifi Routers, Access Points, And Wireless Adapters. The 10Dbi Dual Band 2.4G/5.8G Wifi; The 2.4 Ghz Band Provides Better Coverage And Range, While The 5.8 Ghz Band Provides Higher Data Transfer Rates. Improve The Range And Performance Of Wireless Devices.
Features
- Dual Band WiFi: 2.4GHz (2400 - 2500 MHz), 5.8GHz (4900 - 5900 MHz); Gain: 10dBi; Direction: Omni-directional; Antenna Connector: RP-SMA Male Connector Length: 15cm
- The Antenna Features an RP-SMA Male connector, which is a common connector used in many WiFi routers, access points, and wireless adapters. The 10DBi Dual band 2.4G/5.8G WIFI; the 2.4 GHz band provides better coverage and range, while the 5.8 GHz band provides higher data transfer rates. Improve the range and performance of wireless devices
- Compatible with: Wireless Network Router, WiFi IP Security Camera; Wireless Video Surveillance DVR Recorder; WiFi Signal Booster Repeater, WiFi Range Extender, FPV Camera Monitor, Wireless Video Transmitter and Receiver, Wireless HDMI Extender.
- You can get 4 PCS 10DBi Dual Band Antenna. If you have any questions about this product, you can click'' Geekstory'' to em-ail us.
- NOTE: Please confirm whether the interface is suitable for your device before purchasing.
- See more on Amazon...
Brand: Geekstory | Manufacturer: Geekstory
Warranty: Six Months
See On Amazon