ISINFLASH - Buying Guide
Last Updated: 05/17/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
ISINFLASH Battery Disconnect Swicth 12-48V, Battery Master Cut Shut Off Isolator Switch for Marine Boat RV ATV Car Utv Vehicle, Max 32V DC 100A Cont 150A Power Battery Switches (On-Off-Out) (100A)
Asin: B0CRTPZ9XV | Model: 8080579 | PartNumber: 8080579
【Premium Material】Made Of Heavy-Duty Abs Plastic, Our Battery Power Cut-Off Master Switch Is Built To Withstand Harsh Marine Conditions And Ensure Safety..
【Easy To Use】Plug And Play, This Power Disconnect Switch Has A Compact Size, Sleek Modern Appearance, And Offers Easy Installation And Cable Connection. The Mounting Hole Size Is 29Mm..
【Disconnect Battery Protection】This Battery Isolator Switch Can Eliminate Any Power Draw From The Battery When Vehicle Or Boat Is Not In Use. It Provides A Secure Disconnect Of The Battery And Offers Three Positions: On-Off&Out. Turn To "Out" Remove The Knob So That The Switch Can't Be Turned On..
【Widely Application】Isinflash Waterproof Battery Isolator Selector Switch Is Suitable For Various Vehicles, Including Cars, Off-Road Vehicles, Trucks, Motorcycles, Boats, And More..
Features
- Battery Disconnect Switch Continuous rating: 100Amps 32VDC Max. Intermittent rating: 150Amps. Cranking rating: 500Amps 5 sec. Contact resistance: 50m ohm. Max insulation resistance: DC 500V 100M ohm. Min dielectric strength: AC 1000V 1 minute, DC 2000V 1 minute. Operation temperature: 30 +60 . Switch function : 3P SPST ON-OFF-OUT. Mounting hole : 29mm
- Widely Application ISINFLASH Waterproof battery isolator selector switch is suitable for various vehicles, including cars, off-road vehicles, trucks, motorcycles, boats, and more.
- Premium Material Made of heavy-duty ABS plastic, our battery power cut-off master switch is built to withstand harsh marine conditions and ensure safety.
- Disconnect Battery Protection This battery isolator switch can eliminate any power draw from the battery when vehicle or boat is not in use. It provides a secure disconnect of the battery and offers three positions: ON-OFF&OUT. Turn to OUT remove the knob so that the switch can't be turned on.
- Easy to Use Plug and play, this power disconnect switch has a compact size, sleek modern appearance, and offers easy installation and cable connection. The mounting hole size is 29mm.
- See more on Amazon...
Brand: ISINFLASH | Manufacturer: ISINFLASH
Dimensions: 1.77 x 2.56 x 2.16 inches
See On Amazon #2
ISINFLASH Car Headlight Restoration Kit, 3 Easy Steps to Restore Sun Damaged Automotive Headlights Lens, Polish Restorer Cleaner Tool DIY Polishing, Sanding Discs, Scouring Pads for Electric Drill
Asin: B0CRRTS84P | Model: 4722748 | PartNumber: 4722748
【3 Easy Steps To Protects Your Headlights】Step 1 - Surface Activator, Proprietary Activator Softens Plastic, Making It Easier To Sand Smooth. Step 2 - Sand And Polish. Step 3 - Finish And Seal With Uv Block Clear Coat Applicator..
【Kit Contains】2 X P800 Sanding Discs, 2 X P1200 Sanding Discs, 2 X P2000 Sanding Discs, 1 X Masking Tape, 1 X Orange Sponge Disc, 1 X White Sponge, 2 X 40Gm Polish Pastc, 2 X Uv Protection Liquid 3Ml, 1 X Backer Pad M10 Thread, 1 X Adapter..
【Professional Headlight Restoration Kit】Lets Your Shine And Restore Plastic Lenses, Including Headlights, Taillights, Fog And Directional Lights. By Restoring Clarity To Lens, The Performance Of The Headlight Is Improved And The Appearance Of The Vehicle Is Enhanced. You Can Produce Professional Results With The Headlight Lens Restoration Kit. Headlight Restores Kit Includes All Items Necessary To Perform The Task Except For The Masking Tape..
【Restores Headlight Light Output】Restores Original Clarity And Vision To Sun Damaged Plastic Headlight Lenses. The Lenses Will Be Clearer, The Headlight Will Shine Brighter, And The Road Ahead Will Be Better Illuminated..
Features
- Restores Headlight to A Like-New Appearance ISINFLASH Headlight restorer kit on your vehicle can become yellow, dull, and hazy from the sun. Headlight restoration kit fully removes haze and corrosion and restores the clarity and shine you need to see downroad at night.
- Restores Headlight Light Output Restores original clarity and vision to sun damaged plastic headlight lenses. The lenses will be clearer, the headlight will shine brighter, and the road ahead will be better illuminated.
- 3 Easy Steps to Protects Your Headlights Step 1 - Surface activator, Proprietary activator softens plastic, making it easier to sand smooth. Step 2 - Sand and polish. Step 3 - Finish and seal with UV block clear coat applicator.
- Professional Headlight Restoration Kit Lets your shine and restore plastic lenses, including headlights, taillights, fog and directional lights. By restoring clarity to lens, the performance of the headlight is improved and the appearance of the vehicle is enhanced. You can produce professional results with the headlight lens restoration kit. Headlight restores kit includes all items necessary to perform the task except for the masking tape.
- Kit Contains 2 x P800 Sanding Discs, 2 x P1200 Sanding Discs, 2 x P2000 Sanding Discs, 1 x Masking Tape, 1 x Orange Sponge Disc, 1 x White Sponge, 2 x 40gm Polish Pastc, 2 x UV Protection Liquid 3ml, 1 x Backer Pad M10 Thread, 1 x Adapter.
- See more on Amazon...
Brand: ISINFLASH | Manufacturer: ISINFLASH
Warranty: 2 years
See On Amazon #3
ISINFLASH TPMS Sensors for Toyota Sienna 2006-2020, Sequoia 2006-2017, Tundra 2006-2017, 315MHz Pre-Programmed Tire Pressure Monitor Sensor Replace OE# 426070C070 529333X200 4260708010 4 PCS
Asin: B0CRRFG8HZ
【Perfect Function】Sequoia Tpms With High Level Of Tire Monitor Accuracy And Sensitivity Perfectly Matched With The Front And Rear Wheels, Left And Right Sides Means You Will Get A Fairly Reliable Sensor To Monitor Tire Pressure.
【Just Oe Relearning】Tundra Tpms Sensors Are Pre-Programmed The Same Process As Oe Ensures Its Reliability And Safety, Easy To Install, Just Need To Relearning After Installation. You Can Refer To The Instructions In The Product For More Detailed Installation Steps..
【Long Last Life】Each Sienna Tire Pressure Monitor System (Tpms) Has Been 100% Tested To Ensure Trouble-Free Installation And Performance. The Battery Of This Tpms Is Made To Last Up To 5-8 Years Of Normal Use And Can Withstand 120 Degrees High Temperature..
【Replace Oe】Tire Pressure Sensor Oe# 4260708010, 426070C030, 426070C040, 426070C050, 426070C060, 426070C070, 426070C080, 4D0601361a, 529333X200, 529333X200ds, 529333X200u, 529363X000, Mr990836, Pt5863408b, Tl309, Tpm102, Tpm135, Tpm135a, Tpm170..
Features
- Fit for Toyota Model ISINFLASH TPMS sensors compatible with 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 Sequoia, 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 Sienna, 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 Tundra.
- Replace OE Tire pressure sensor OE# 4260708010, 426070C030, 426070C040, 426070C050, 426070C060, 426070C070, 426070C080, 4D0601361A, 529333X200, 529333X200DS, 529333X200U, 529363X000, MR990836, PT5863408B, TL309, TPM102, TPM135, TPM135A, TPM170.
- Perfect Function Sequoia TPMS with high level of tire monitor accuracy and sensitivity perfectly matched with the front and rear wheels, left and right sides means you will get a fairly reliable sensor to monitor tire pressure
- Long Last Life Each Sienna tire pressure monitor system (TPMS) has been 100% tested to ensure trouble-free installation and performance. The Battery of this TPMS is made to last up to 5-8 years of normal use and can withstand 120 degrees high temperature.
- Just OE Relearning Tundra TPMS sensors are pre-programmed the same process as OE ensures its reliability and safety, easy to install, just need to relearning after installation. You can refer to the instructions in the product for more detailed installation steps.
- See more on Amazon...
Brand: ISINFLASH | Manufacturer: ISINFLASH
See On Amazon #4
ISINFLASH Front Turn Signal Connector Fit for Jeep Wrangler JK 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2007-2018 Turn Signal Wire Harness Pigtail Replace 68065016AB
Asin: B0CS5JBW7W | Model: 8373002 | PartNumber: 8373002
【High Quality】Made Of Excellent Plastic For Lightweight, Sturdy And Durable, Long-Life Service.
【Package Included】1 X Turn Signal Connector Plug , 3 X Intermediate Terminals, 3 X Heat Shrink Tubes..
【Easy To Install】The Front Turn Signal Connector Harness Can Be Directly Replaced And Installed, Saving Time And Effort, Direct Replace, Professional Installation Is Highly Recommended.
【Fit For】Front Turn Signal Connector Compatible With Jeep Wrangler Jk 2007-2018..
Features
- Replace Part Number ISINFLASH Front turn signal light connector plug harness: 68065016AB.
- Fit for Front turn signal connector compatible with Jeep Wrangler JK 2007-2018.
- High Quality Made of excellent plastic for lightweight, sturdy and durable, long-life service
- Easy to Install The front turn signal connector harness can be directly replaced and installed, saving time and effort, direct replace, professional Installation is highly recommended
- Package Included 1 x Turn signal connector plug , 3 x Intermediate terminals, 3 x Heat shrink tubes.
- See more on Amazon...
Brand: ISINFLASH | Manufacturer: ISINFLASH
Warranty: 2 year
See On Amazon #5
ISINFLASH ATV UTV SXS Turn Signal Horn Kit Street Legal Rocker Switch with LED Lights Hazard Flasher Relay Compatible with Polaris RZR Ranger Turbo Can-Am Golf Carts Kawasaki Teryx
Asin: B0CRRSCQ11 | Model: 4794723 | PartNumber: 4794723
【Upgrade Kits】Universal Utv Rocker Switch Turn Signal Kit With Horn And Reverse Light Feature. Turn Signal Lights Are An Important Tool For Predicting Vehicle Dynamics. This Turn Signal Kit Comes With A Red/Black Spare Extension Cables And Instructions For All Your Requirements..
【Turn Signal Kits】1X Turn Signal Switch, 1X Warning Light Switch, 1X Switch For Horn And Reverse Light, 1X Horn, 1X Flasher Relay, 1X Fuse Line, 2X White Reverse Light, 2X Clear/White Lights, 4X Amber Lights, 4X Red Lights, 1X Red/Black Spare Extension Cables..
【Easy To Install】Just Drilling A 3/4" Hole And Pushing These Small Leds In, Mounting On All 4 Corners Of The Motor Is Quite Easy, Anyone With A Basic Understanding Of 12V Electrical Systems Can Easily Install Them..
【Safe And Durable】Isinflash Turn Signal Kit Is Made Of High Quality Abs Plastic, Precise And Rigorous Circuit Design, The Most Penetrating Light, Visible In Rain And Fog, Comprehensive Safety Features, Bringing You A Fancy Experience And Compliance With Road Regulations..
Features
- Application Models Universal ATV UTV rocker switch turn signals street legal kit compatible with Polaris RZR Ranger Turbo Can-Am, and compatible with Golf cart Beach cart 4x4 Project and Dune Buggy.
- Safe and Durable ISINFLASH turn signal kit is made of high quality ABS plastic, precise and rigorous circuit design, the most penetrating light, visible in rain and fog, comprehensive safety features, bringing you a fancy experience and compliance with road regulations.
- Upgrade Kits Universal UTV rocker switch turn signal kit with horn and reverse light feature. Turn signal lights are an important tool for predicting vehicle dynamics. This turn signal kit comes with a red/black spare extension cables and instructions for all your requirements.
- Easy to Install Just drilling a 3/4 hole and pushing these small LEDs in, mounting on all 4 corners of the motor is quite easy, anyone with a basic understanding of 12v electrical systems can easily install them.
- Turn Signal Kits 1x turn signal switch, 1x warning light switch, 1x switch for horn and reverse light, 1x horn, 1x flasher relay, 1x fuse line, 2x white reverse light, 2x clear/white lights, 4x amber lights, 4x red lights, 1x red/black spare extension cables.
- See more on Amazon...
Brand: ISINFLASH | Manufacturer: ISINFLASH
Warranty: 2 years
See On Amazon #6
J1171 Starter Compatible with 96-07 Mercruiser Volvo Penta for 3.0 4.3 5.0 5.7 6.2 7.4 8.1 8.2L V6 V8, Mercury Marine 863007A1 50-863007A1 Arco 30460 ARC30433 57-30433 3660566-3 3857747 3885317
Asin: B0CS3MJRTN | Model: 6181839 | PartNumber: 6181839
【Applicable Parameters】New; Unit Type: Pmgr; Voltage: 12V; Kw: 1.4; Tooth Count: 11; Unit Finish: Same As Oe; Number Of Pieces: 1;.
【Long Lasting Life】Manufactured With 100% New Premium Quality Components, Engineered To Meet Or Exceed Oem Specifications. All Items Tested For Reliability, Durability And Performance.
【Perfect Fit】Standardized Production Makes The Size Very Accurate And Ensure Insert Precise Fitment And Easy Installation..
【J1171 Standard Sae】External Ignition Protection Of Marine Electrical Devices - Additionally Coated With Black Epoxy For Corrosion Resistance - Updated Design Pg260g Permanent Magnet Gear Reduction (High Torque 2.0Hp)..
Features
- Replacement Part Numbers 50863007A1, 50-863007A1, 9000839J1171, 9000839 J1171, 863007A1, SDR0253BL, 863007A1, 6792BN, 6792B, SDR0253BL, 5399M-D, PH140-0017-D, 18-6275-1, 19715, TM000A24301, SDR0031-M, SDR0031M, M59601, 8000108, 6792N-MD, 6792NMD, 50-807907, 50807907, 410-46007, 41046007, 410-12174, 41012174, 3660566-3, 3857747, 3860566, 3860566-3, 3885317.
- J1171 Standard SAE External ignition protection of marine electrical devices - additionally coated with black epoxy for corrosion resistance - updated design Pg260G permanent magnet gear reduction (High Torque 2.0HP).
- Applicable Parameters New; Unit type: PMGR; Voltage: 12V; kW: 1.4; Tooth count: 11; Unit finish: Same as OE; Number of pieces: 1;
- Perfect Fit Standardized production makes the size very accurate and ensure insert precise fitment and easy installation.
- Long Lasting Life Manufactured with 100% new premium quality components, engineered to meet or exceed OEM specifications. All items tested for reliability, durability and performance
- See more on Amazon...
Brand: ISINFLASH | Manufacturer: ISINFLASH
See On Amazon #7
ISINFLASH 110-240V AC Adapter with AC Power Cord Power Cable Charger for Car Refrigerator 12V Car Fridge Freezer Compatible with Alpicool Bodega Euhomy BougeRV ARB ICECO Setpower
Asin: B0CRTMRL9X
【Multiple Protection】Car Refrigerator Charger Undergo Multi-Test To Ensure Safe And Keep Dangerous Away. We Guarantee This Car Freezer Dc Charger Will Power Your Car Freezer Efficiently. And This Replacement Car Freezer Charger Cord Are Certified And Built Within Over-Voltage, Over-Load, Over-Current And Short Circuit Protection..
【Length For Charging Cable】This Ac Power Cord Adapt 110-240V For 12 Volt Refrigerator Power Cable Is (2M/78In) Long Enough For Use In Home, Camping, Picnics And Traveling. Suitable For Indoor And Outdoor Use..
【Ul Certified】Isinflash Ac Adapter Is Ul Certified. Input: 100-240V, 50/60Hz, 2.5A. Output: 14.5V, 4.1A, 89.7W..
【High Quality】The Exclusive Charging Technology Used Ac Power Cord Provides The Fastest Charging Speed. Exquisite Design, Space Saving, Simple Installation Male Cigarette Lighter Plug For Car Freezer. High-Quality Material Ensures Transmission In A Stable Situation..
Features
- Compatible with Most Brands ISINFLASH 110-240V AC Car refrigerator power cord fit for BODEGA, AstroAI, Euhomy, BougeRV, JOYTUTUS, Alpicool, ARB, ICECO, Setpower, Aspenora, Kalamera, F40C4TMP, Wagam, AUTOOMMO, ect. Please note: This car adapter is not compatible with all car fridge and car cooler.
- High Quality The exclusive charging technology used AC power cord provides the fastest charging speed. Exquisite design, space saving, simple installation male cigarette lighter plug for car freezer. High-quality material ensures transmission in a stable situation.
- Multiple Protection Car refrigerator charger undergo multi-test to ensure safe and keep dangerous away. We guarantee this car freezer dc charger will power your car freezer efficiently. And this replacement car freezer charger cord are certified and built within over-voltage, over-load, over-current and short circuit protection.
- UL Certified ISINFLASH AC adapter is UL certified. INPUT: 100-240V, 50/60Hz, 2.5A. OUTPUT: 14.5V, 4.1A, 89.7W.
- Length for Charging Cable This AC power cord adapt 110-240v for 12 volt refrigerator power cable is (2m/78in) long enough for use in home, camping, picnics and traveling. Suitable for indoor and outdoor use.
- See more on Amazon...
Brand: ISINFLASH | Manufacturer: ISINFLASH
Dimensions: 1.00 x 1.00 x 1.00 inches | Weight: 0.88 Pounds
Warranty: 2 years
See On Amazon #8
ISINFLASH 433MHz TPMS Tire Pressure Monitoring System Sensor Compatible with Chrysler Jeep Wrangler JK Dodge Ram Charger Replacement OE for 56029398AB 68142397AA 68241067AA 68241067AB 1Pack
Asin: B0CRRGPS4B
【Replace Oe】56029398Aa, 56029398Ab, 68142397Aa, 68241067Aa, 68241067Ab, 68406537Aa, 68402371Aa, 56029400Aa, 56029400Ab, 56029400Ac, 56029400Ad, 56029400Ae..
【Just Obd Learning】Ram Tpms Sensors Are Pre-Programmed The Same Process As Oe Ensures Its Reliability And Safety, Easy To Install, Just Need To Obd Learning After Installation. You Can Refer To The Instructions In The Product For More Detailed Installation Steps..
【Long Last Life】Each Wrangler Tire Pressure Monitor System (Tpms) Has Been 100% Tested To Ensure Trouble-Free Installation And Performance. The Battery Of This Tpms Is Made To Last Up To 5-8 Years Of Normal Use And Can Withstand 120 Degrees High Temperature..
【Fit For Ram & Fiat】For Ram 1500 2011 2012 2013. Ram 2500 2011 2012 2013 2014, Ram 3500 2011 2012 2013 2014, Ram 4500 2011 2012 2013, Ram 5500 2011 2012 2013, Ram C/V 2012 2013 2014 2015, Promaster 1500 2014 2015 2016 2017 2018, Promaster 2500 2014 2015 2016 2017 2018, Promaster 3500 2014 2015 2016 2017 2018, Promaster City 2015 2016 2017 2018 2019 2020 2021|Fiat 500 2011-2019, Fiat 500L 2014-2020, Fiat 500X 2016 2017.
Features
- Fit for Chrysler & Jeep & Dodge ISINFLASH TPMS tire pressure sensors for Chrysler 300 2009-2021, Town & Country 2011 2012 2013 2014 2015 2016, Voyager 2020, Challenger 2008-2021, Charger 2009-2021, Durango 2011-2018, Grand Caravan 2011-2020, Journey 2010-2020, Dodge Ram 1500 2010, Dodge Ram 2500 2010, Dodge Ram 3500 2010, Viper 2015 2016 2017, Compass 2012, Gladiator 2020 2021, Grand Cherokee 2010 2011 2012 2013 2014 2015 2016 2017, Wrangler 2013-2021, Wrangler JK 2018.
- Fit for Ram & Fiat for Ram 1500 2011 2012 2013. Ram 2500 2011 2012 2013 2014, Ram 3500 2011 2012 2013 2014, Ram 4500 2011 2012 2013, Ram 5500 2011 2012 2013, Ram C/V 2012 2013 2014 2015, ProMaster 1500 2014 2015 2016 2017 2018, ProMaster 2500 2014 2015 2016 2017 2018, ProMaster 3500 2014 2015 2016 2017 2018, ProMaster City 2015 2016 2017 2018 2019 2020 2021|Fiat 500 2011-2019, Fiat 500L 2014-2020, Fiat 500X 2016 2017
- Replace OE 56029398AA, 56029398AB, 68142397AA, 68241067AA, 68241067AB, 68406537AA, 68402371AA, 56029400AA, 56029400AB, 56029400AC, 56029400AD, 56029400AE.
- Long Last Life Each Wrangler tire pressure monitor system (TPMS) has been 100% tested to ensure trouble-free installation and performance. The Battery of this TPMS is made to last up to 5-8 years of normal use and can withstand 120 degrees high temperature.
- Just OBD Learning Ram TPMS sensors are pre-programmed the same process as OE ensures its reliability and safety, easy to install, just need to OBD Learning after installation. You can refer to the instructions in the product for more detailed installation steps.
- See more on Amazon...
Brand: ISINFLASH | Manufacturer: ISINFLASH
See On Amazon #9
ISINFLASH Ignition Switch Kit Lock Cylinder for Volkswagen VW Golf Jetta 2005-2011 MK5 Audi A3 2003-2013 R8 Replace 1K0905851B 1K0905865 5Q0905865A Ignition Lock Cylinder with Key Ignition Switch
Asin: B0CRSY3T77 | Model: 4569573 | PartNumber: 4569573
【Ignition Switch Lock Cylinder】If Your Ignition Key Doesn't Turn Or It Turns Much Farther Than It Used To, The Problem Could Be With Your Ignition Lock Cylinder. This Replacement Ignition Switch Lock Cylinder Solves The Issue Of The Key Not Turning Past On Position To Start Lock Fix..
【Easy To Install】Plug And Play Design For Direct Replacement And Ease Of Installation, Performs As Well As Or Better Than Oe..
【Oem Design】Ignition Lock Cylinder Constructed Of Premium Material For Long Lasting Durable And Reliable. New Ignition Starter Switch Steering Lock For A Complete Direct Replacement..
【Replace Oe】1K0 905 851 B, 1K0905851b, 5Q0905865a, 1K0 905 865, 1K0905865, 1K0 905 841,1K0905841, 1K0905865a, 1K0 905 865A, 1K0905849a, 1K0905849b, 1K0905865b..
Features
- Compatible with ISINFLASH Ignition switch kit lock cylinder fit for Volkswagen Jetta 2005-2011, 2004-2011 Golf, 2006-2011 Eos, 2006-2009 Rabbit, 2009-2012 Scirocco, 2003-2010 Touran, 2004-2011 Caddy, 2008-2011 Tiguan, for Audi A3 2003-2013, 2007-2010 TT, 2007-2013 R8, for Seat Leon 2006-2010, 2004-2013 Altea, 2005-2009 Toledo, for Skoda Octavia 2004-2013, 2008-2015 Superb.
- Replace OE 1K0 905 851 B, 1K0905851B, 5Q0905865A, 1K0 905 865, 1K0905865, 1K0 905 841,1K0905841, 1K0905865A, 1K0 905 865A, 1K0905849A, 1K0905849B, 1K0905865B.
- Ignition Switch Lock Cylinder If your ignition key doesn't turn or it turns much farther than it used to, the problem could be with your ignition lock cylinder. This replacement ignition switch lock cylinder solves the issue of the key not turning past on position to start lock fix.
- OEM Design Ignition lock cylinder constructed of premium material for long lasting durable and reliable. New ignition starter switch steering lock for a complete direct replacement.
- Easy to Install Plug and play design for direct replacement and ease of installation, performs as well as or better than OE.
- See more on Amazon...
Brand: ISINFLASH | Manufacturer: Ignition Switch Kit Lock Cylinder for Volkswagen
Warranty: 2 years
See On Amazon #10
ISINFLASH Engine Cradle Subframe Bushing Set of 4Pcs Compatible with Nissan SENTRA 2007-2012 2007 2008 2009 2010 2011 2012 Replace OE 523-227 523-228
Asin: B0CVVHT4CJ | Model: 6368044 | PartNumber: 6368044
【Durability】Engine Cradle Subframe Bushing Are Made Of High-Quality Materials With Strong Resistance To Wear And Tear. This Ensures The Long-Lasting Performance Of The Product Without The Need For Frequent Replacement..
【Enhanced Performance】Engine Cradle Subframe Bushing Can Effectively Reduce Engine Vibration, Making Driving Smoother And More Comfortable. It Can Also Improve The Overall Stability Of The Vehicle, Achieving Precise Handling And Control..
【Excellent Design】The Design Of Engine Cradle Subframe Bushing Adopts Advanced Engineering Technology To Optimize Its Performance And Reduce Pressure On The Engine And Other Vehicle Components..
【Replace Oe】523-227, 523-228..
Features
- Fitment Engine Cradle Subframe Bushing Set Compatible with NISSAN SENTRA 2007 2008 2009 2010 2011 2012.
- Replace OE 523-227, 523-228.
- Durability Engine Cradle Subframe Bushing are made of high-quality materials with strong resistance to wear and tear. This ensures the long-lasting performance of the product without the need for frequent replacement.
- Excellent Design The design of Engine Cradle Subframe Bushing adopts advanced engineering technology to optimize its performance and reduce pressure on the engine and other vehicle components.
- Enhanced Performance Engine Cradle Subframe Bushing can effectively reduce engine vibration, making driving smoother and more comfortable. It can also improve the overall stability of the vehicle, achieving precise handling and control.
- See more on Amazon...
Brand: ISINFLASH | Manufacturer: ISINFLASH
Warranty: 2 year
See On Amazon #11
ISINFLASH 84326294 Rear Air Suspension Shock Absorbers Struts Compatible with Cadillac XTS 2013 2014 2015 2016 2017 2018 2019 3.6L V6 20903683 23457034 84326293, 1 Pair
Asin: B0CS3QGD9D | Model: 6134965 | PartNumber: 6134965
【Rear Right Oem Part Number】580410, 580427, 5801054, 19302783, 20903683, 22961782, 23121781, 23457035, 84235851, 84326294, 84326296, 5801075, 580-1075..
【Easy To Install】Rear Struts Shock Assembly Comes With Air Suspension Spring Bag Included, Plug-And-Play, Making Installation A Breeze. No Need To Purchase Additional Parts Or Accessories..
【Oe Quality】Magnetic Shock Absorber Adopts The Same Quality As The Original Factory. Using Excellent Shock-Absorbing Oil, Good Lubrication Effect. High-Strength Metal Pipe Body Is Resistant To Compression And Wear, And Will Not Bend. High-Quality Sealing Valve, No Oil Leakage. Long Service Life..
【Rear Left Oem Part Number】580409, 580426, 5801053, 19302782, 20903682, 22961781, 23121780, 23457034, 23457036, 84235850, 84326293, 84326295, 5801074, 580-1074..
Features
- Compatible with Cadillac Vehicles ISINFLASH Rear Air Suspension Shock Absorbers Struts fit for 2013 2014 2015 2016 2017 2018 2019 XTS 3.6L V6 - Gas: XTS Base, Livery, Luxury, Platinum, Premium, Vsport Platinum, Vsport Premium, Vsport Premium Luxury. You can see more information in the description below.
- Rear Left OEM Part Number 580409, 580426, 5801053, 19302782, 20903682, 22961781, 23121780, 23457034, 23457036, 84235850, 84326293, 84326295, 5801074, 580-1074.
- Rear Right OEM Part Number 580410, 580427, 5801054, 19302783, 20903683, 22961782, 23121781, 23457035, 84235851, 84326294, 84326296, 5801075, 580-1075.
- OE Quality Magnetic shock absorber adopts the same quality as the original factory. Using excellent shock-absorbing oil, good lubrication effect. High-strength metal pipe body is resistant to compression and wear, and will not bend. High-quality sealing valve, no oil leakage. Long service life.
- Easy to Install Rear struts shock assembly comes with air suspension spring bag included, plug-and-play, making installation a breeze. No need to purchase additional parts or accessories.
- See more on Amazon...
Brand: ISINFLASH | Manufacturer: ISINFLASH
Warranty: 2 year
See On Amazon #12
ISINFLASH A2115450328 Harness Clip Tail Light Wire Plug Harness Pigtail Fit for Mercedes W204 W211 C200 C23, Rear Tail Light Wiring Harness 7Pin Replace OE 2115450328
Asin: B0CTH9H48T | Model: 8860779 | PartNumber: 8860779
【Superior Quality】The Wire Is High Quality Which Is Made Of Tinned Copper Strands. This Allows For Excellent Conductivity & Makes Repairing/Soldering Much Easier..
【Easy To Install】High Standard Manufacturing Processes Ensure Perfect Installation Of The Product Onto The Original Equipment.Direct Fit, No Modification Requires,No Need For Too Many Complex Installation Techniques And Auxiliary Tools, Saving Time And Money..
【Package Includes】1× 7 Pin Female Pigtail Cable. Size: Approx.14.5 X 5.2Cm(5.71 X 2.05Inch)(Lxw)..
【Fitment】Isinflash Harness Clip Tail Light Wire Plug Harness Pigtail Compatible With Mercedes-Benz W204 C180 C200 C230 C25 C300 C300 C63..
Features
- Replace Part Number 2115450328, A2115450328.
- Fitment ISINFLASH Harness Clip Tail Light Wire Plug Harness Pigtail Compatible With Mercedes-Benz W204 C180 C200 C230 C25 C300 C300 C63.
- Superior Quality The wire is high quality which is made of tinned copper strands. This allows for excellent conductivity & makes repairing/soldering much easier.
- Package Includes 1 7 pin female pigtail cable. Size: approx.14.5 x 5.2cm(5.71 x 2.05inch)(LxW).
- Easy to Install High standard manufacturing processes ensure perfect installation of the product onto the original equipment.Direct fit, no modification requires,No need for too many complex installation techniques and auxiliary tools, saving time and money.
- See more on Amazon...
Brand: ISINFLASH | Manufacturer: ISINFLASH
See On Amazon #13
ISINFLASH Diesel Injector Puller Tool with Slide Hammer Replacement for Bosch Lucas, Fuel Injector Remover with M8 M12 M14 Thread Adapters
Asin: B0CRVD2SQ1 | Model: 8260635 | PartNumber: 8260635
【Function】Fuel Injectors Inject Fuel Directly Into The Cylinder, If Used Continuously For A Long Time, They Are Prone To Crack And Minor Physical Wear, Which May Lead To Engine Instability, Misfire, High Fuel Consumption Or Oil Leaks. This Diesel Injector Puller Easily And Safely Removes Injectors For Testing, Cleaning And Replacement Without Removing The Cylinder Head..
【Long Lasting Life】This Diesel Injector Remover Is Made Of High Quality Steel Which Is Strong And Durable..
【Easy To Use】The Automotive Hammer Puller Tool Has A Steel Rod With Two Threads Helps To Increase Pulling Strength To Pull The Toughest Injectors From Tight Positions. Install The Tool On The Injector While The Engine Not Working Cool, The Stuck Part Will Get An Extra Weight, Then Transfer This Weight To The Shaft, Pull The Connected End And The Injector In The Desired Direction, Keep Repeating This Action Until The Injector Is Removed..
【Injector Removal Tool】The Diesel Fuel Injector Slide Puller Is Designed For Removing Stuck Common-Rail Diesel Injectors Quickly And Safely Without Dismantling The Cylinder Head For Injector Nozzle Cars..
Features
- Fitment ISINFLASH Diesel injector puller tool assists in removing stubborn Bosch and Lucas diesel injectors, is a great replacement for Bosch and Lucas.
- Injector Removal Tool The Diesel Fuel Injector Slide Puller is designed for removing stuck common-rail diesel injectors quickly and safely without dismantling the cylinder head for injector nozzle cars.
- Function Fuel Injectors inject fuel directly into the cylinder, if used continuously for a long time, they are prone to crack and minor physical wear, which may lead to engine instability, misfire, high fuel consumption or oil leaks. This diesel injector puller easily and safely removes injectors for testing, cleaning and replacement without removing the cylinder head.
- Easy to Use The automotive hammer puller tool has a steel rod with two threads helps to increase pulling strength to pull the toughest injectors from tight positions. Install the tool on the injector while the engine not working cool, the stuck part will get an extra weight, then transfer this weight to the shaft, pull the connected end and the injector in the desired direction, keep repeating this action until the injector is removed.
- Long Lasting Life This diesel injector remover is made of high quality steel which is strong and durable.
- See more on Amazon...
Brand: ISINFLASH | Manufacturer: ISINFLASH
Warranty: 2 years
See On Amazon #14
ISINFLASH Ignition Coils Compatible with Ford Lincoln Mazda Mercury 3.5L 3.7L V6 Ignition Coil Packs Set of 6#OE Replacement UF553 UF595 7T4E12A375EB 5C1652 GN10237 CY0118100
Asin: B0CVVQYTX1 | Model: 4538381 | PartNumber: 4538381
【Compatible With Lincoln】Coil Packs For Lincoln Mks 3.7L V6 2009-2016, Mkt 3.7L V6 2010-2016, Mkx 3.5L V6 2007-2010, Mkx 3.7L V6 2011-2016, Mkz 3.5L V6 2007-2012, Mkz 3.7L V6 2013-2016, Fit For Mazda 6 3.7L V6 2009-2013, Cx-9 3.7L V6 2007-2015, Mercury Sable 3.5L V6 2008-2009. Please Check Detail Fitting Info From Pics Or Detail Page. Oe Checking Is Necessary Before Buying..
【10 Minutes Easy Installation】All-In-One Compact Design For Mkz, Real Plug And Play, Quickly Install In 10 Mins. No Retrofitment Required; Replace The Part Yourself Instead Of On The Workshop Not Only Saves Hundreds Of Dollars Of Dealer Prices But Also Saves Time..
【Long Lasted & Premium Quality】Ignition Coils Are Built To Achieve Or Exceed Oe Specifications For F150, Enhanced Reliability And High Performance. High Conductive Copper Wire & High Dielectric Performance Epoxy, Precise, Corrosion-Resistant Connections Ensure Excellent Electrical Connectivity And Lead To A Long Service Life(Over 50000Km & 5 Years). New Coils Can Give You A Much Smoother Running Engine..
【Compatible With Ford】Isinflash Ignition Coils For Ford Edge 3.5L V6 2007-2016, Edge 3.7L V6 2011-2014, Explorer 3.5L V6 2011-2017, F150 3.5L V6 2015-2017, F150 3.7L V6 2011-2014, Flex 3.5L V6 2009-2017, Fusion 3.5L V6 2010-2012, Mustang 3.7L V6 2011-2016, Police Interceptor Sedan 3.5L / 3.7L V6 2013-2017, Police Interceptor Utility 3.7L V6 2013-2017, Taurus 3.5L V6 2008-2016, Taurus X 3.5L V6 2008-2009, Transit 3.7L V6 2015-2017, Transit-150/Transit-25 /Transit-350/Transit-350 Hd 3.7L V6 2015-2018..
Features
- Replace OEM Part Number UF553, UF-553, 5117, 50106, 521888, 1788498, 6736013, 9212137, 5C1652, C1595, C720, C753, CY0118100, CY0118100A, CY0118100B, DG520, E1053, E1095, E1146, GN10237, IC633, IC685, IC685SB, IGN00116, IGN00305, UF595, ZZJ118100, 610-00119, CY0118100Z02, 7T4Z12029E, 7T4E-12A375-EE, 7T4E12A375ED, 7T4E-12A375-ED, 7T4E12A375EC, 7T4E-12A375-EC, 7T4E12A375EB, 7T4E-12A375-EB, 7T4E12A375EE.
- Compatible with Ford ISINFLASH Ignition coils for Ford Edge 3.5L V6 2007-2016, Edge 3.7L V6 2011-2014, Explorer 3.5L V6 2011-2017, F150 3.5L V6 2015-2017, F150 3.7L V6 2011-2014, Flex 3.5L V6 2009-2017, Fusion 3.5L V6 2010-2012, Mustang 3.7L V6 2011-2016, Police Interceptor Sedan 3.5L / 3.7L V6 2013-2017, Police Interceptor Utility 3.7L V6 2013-2017, Taurus 3.5L V6 2008-2016, Taurus X 3.5L V6 2008-2009, Transit 3.7L V6 2015-2017, Transit-150/Transit-25 /Transit-350/Transit-350 HD 3.7L V6 2015-2018.
- Compatible with Lincoln Coil Packs for Lincoln MKS 3.7L V6 2009-2016, MKT 3.7L V6 2010-2016, MKX 3.5L V6 2007-2010, MKX 3.7L V6 2011-2016, MKZ 3.5L V6 2007-2012, MKZ 3.7L V6 2013-2016, Fit for Mazda 6 3.7L V6 2009-2013, CX-9 3.7L V6 2007-2015, Mercury Sable 3.5L V6 2008-2009. Please check detail fitting info from pics or detail page. OE checking is necessary before buying.
- Long Lasted & Premium Quality Ignition coils are built to achieve or exceed OE specifications for F150, enhanced reliability and high performance. High conductive copper wire & high dielectric performance epoxy, Precise, corrosion-resistant connections ensure excellent electrical connectivity and lead to a long service life(over 50000km & 5 years). New coils can give you a much smoother running engine.
- 10 Minutes Easy Installation All-in-one compact design for MKZ, real plug and play, quickly install in 10 mins. No retrofitment required; replace the part yourself instead of on the workshop not only saves hundreds of dollars of dealer prices but also saves time.
- See more on Amazon...
Brand: ISINFLASH | Manufacturer: ISINFLASH
Warranty: 2 year
See On Amazon #15
ISINFLASH Powered Tailgate Lock Actuator Compatible with Ford Trucks F150 F250 F350 Super Duty 2017 2018 2019 2020 2021 Rear Gate Lock Control Replacement GC3Z-9943170-A FL3Z-9943170-C, GC3Z-9943170-B
Asin: B0CRT3FZ1M
【Premium Quality】Long Life-Span Matters, Back Door Lock Actuator Is Composed Of High-Quality Plastic, Which Can Effectively To Make The Rear Gate Latch More Durable And Protect It From Damage. Greatly Increase The Service Life. Built-In Mute Sponge Can Not Only Buffer And Protect Actuator Motor But Also Make Work Quiet..
【Easy To Install】It Is Easy To Install And Is Compatible With The Original Electrical System For Ford F150 F250 F350 Super Duty Models Requiring No Additional Modifications Or Alterations. Powered Tailgate Lock Actuator Only Takes A Little Money And Less Than 20 Minutes To Complete The Installation..
【Oem Design】Powered Tailgate Actuator Is Reliable And Stable With Good Hardness And Toughness To Improve Service Life, 100% Tested Before Shipping, Wear-Resistant And Scratch-Resistant, Providing Long Service Time, Our Rear Gate Tailgate Actuator Is Totally Meeting Oem Requirements..
【Replace Oe Number】Gc3z-9943170-E, Fl3z-9943170-C, Gc3z-9943170-A, Gc3z-9943170-B, Gc3z-9943170-D..
Features
- Compatible with ISINFLASH Tailgate actuator fits for 2017 2018 2019 2020 2021 Ford F-150, 2017 2018 2019 2020 2021 F250, 2017 2018 2019 2020 2021 F-350.
- Replace OE Number GC3Z-9943170-E, FL3Z-9943170-C, GC3Z-9943170-A, GC3Z-9943170-B, GC3Z-9943170-D.
- Premium Quality Long life-span matters, back door lock actuator is composed of high-quality plastic, which can effectively to make the rear gate latch more durable and protect it from damage. Greatly increase the service life. Built-in mute sponge can not only buffer and protect actuator motor but also make work quiet.
- OEM Design Powered Tailgate Actuator is reliable and stable with good hardness and toughness to improve service life, 100% Tested before shipping, wear-resistant and scratch-resistant, providing long service time, our rear gate tailgate actuator is totally meeting OEM Requirements.
- Easy to Install It is easy to install and is compatible with the original electrical system for Ford F150 F250 F350 Super Duty models requiring no additional modifications or alterations. Powered Tailgate Lock Actuator only takes a little money and less than 20 minutes to complete the installation.
- See more on Amazon...
Brand: ISINFLASH | Manufacturer: ISINFLASH
Dimensions: 2.28 x 8.27 x 5.00 inches | Weight: 0.51 Pounds
See On Amazon #16
ISINFLASH 14pcs Bearing Puller Set, 5 Ton Capacity Bearing Separator, Wheel Hub Axle Puller Set, Pinion Wheel Bearing Removal Kit with 2" and 3" Jaws, Heavy Duty Bearing Splitter Tool Kit
Asin: B0CRVMZ6WP | Model: 8197413 | PartNumber: 8197413
【Widely Applicable】Bearing Separator Kit Includes Two-Piece Bearing Separator Jaws Suitable For Most Small And Large Wheel Bearings And Gears. The 14 Piece Push-Pull Leg And Extended Leg Are Suitable For Most Different Lengths Of Shaft. This Toolset Is Very Suitable For Towing Gears, Pulleys, Bearings, Axles, Pinions, And Steering Wheels On Cars, Vehicles, Atvs, And Light Trucks..
【Easy To Storage】Come With Heavy Duty Plastic Blow-Molded Carrying Case With Handle And Latches For Safe Transport, Simple Storage, And Quick Organization..
【Efficient Operation】Wheel Hub Axle Puller Set Includes Two Most Widely Used Bearing Separator Jaws, Help To Complete A Variety Of Bearing Pulling Jobs, And The 5-Ton-Capacity And Heavy-Duty Industrial Grade Bolts Ensure Tools Will Not Bend And Break During Operation. Crafted For Even Pressure Application, This Set Ensures The Smooth Separation Of Bearings And Extraction Of Gears Without Causing Damage To The Components..
【Premium Materials】This Gear Puller Adopts A Sturdy Drop Hammer Forging Structure And Is Made Of Heat-Treated High Hardness 45 # Carbon Steel. Coated With Black Oxide Coating, It Has Super Strength And Long-Term Durability, And Can Withstand Rough Operations On Stubborn Bearings And Gears..
Features
- 14Pcs Bearing Puller Set ISINFLASH 5-ton capacity bearing puller Kit includes 2-piece maximum opening bearing separator jaws (2 ', 3' '), 1-piece heavy-duty forcing screws (7' '), 4-piece hexagonal push pull legs (4', 5 '') 4-piece hexagonal extension legs (4 '', 5 ''. Includes all traction components to help you efficiently and quickly remove and install large and small wheel bearings on most car front and rear wheels, gears, pulleys, half shafts, and pinions.
- Premium Materials This gear puller adopts a sturdy drop hammer forging structure and is made of heat-treated high hardness 45 # carbon steel. Coated with black oxide coating, it has super strength and long-term durability, and can withstand rough operations on stubborn bearings and gears.
- Widely Applicable Bearing separator kit includes two-piece bearing separator jaws suitable for most small and large wheel bearings and gears. The 14 piece push-pull leg and extended leg are suitable for most different lengths of shaft. This toolset is very suitable for towing gears, pulleys, bearings, axles, pinions, and steering wheels on cars, vehicles, ATVs, and light trucks.
- Efficient Operation Wheel hub axle puller set includes two most widely used bearing separator jaws, help to complete a variety of bearing pulling jobs, and the 5-ton-capacity and heavy-duty industrial grade bolts ensure tools will not bend and break during operation. Crafted for even pressure application, this set ensures the smooth separation of bearings and extraction of gears without causing damage to the components.
- Easy to Storage Come with heavy duty plastic blow-molded carrying case with handle and latches for safe transport, simple storage, and quick organization.
- See more on Amazon...
Brand: ISINFLASH | Manufacturer: ISINFLASH
Warranty: 2 years
See On Amazon #17
ISINFLASH DC Power Cord Cable 12V/24V for Car Refrigerator Car Fridge Freezer Compatible with 12 Volt Cigarette Lighter Plug Portable Freezer Compressor Cooler
Asin: B0CRT4GJ32 | Model: 6568160 | PartNumber: 6568160
【High Quality】The Exclusive Charging Technology Used Dc Power Cord Provides The Fastest Charging Speed. Exquisite Design, Space Saving, Simple Installation Male Cigarette Lighter Plug For Car Freezer. High-Quality Material Ensures Transmission In A Stable Situation..
【Length For Charging Cable】This 12 Volt Refrigerator Power Cable Is (2.4M/94.5In) Long Enough For Use In The Car, Camping, Picnics And Traveling..
【Compatible With Most Brands】12V Car Refrigerator Dc Power Cord Fit For Bodega, Astroai, Euhomy, Bougerv, Joytutus, Alpicool, Arb, Iceco, Setpower, Aspenora, Kalamera, F40c4tmp, Wagam, Autoommo, Ect. Please Note: This Car Adapter Is Not Compatible With All Car Fridge And Car Cooler. Please Check The Power Cord Of Your Car Freezer Before Purchasing..
【Multiple Protection】Refrigerator Car Charger Undergo Multi-Test To Ensure Safe And Keep Dangerous Away. We Guarantee This Car Freezer Dc Charger Will Power Your Car Freezer Efficiently..
Features
- Widely Application ISINFLASH 12V/24V DC power cord connect cable for car refrigerator car fridge freezer portable car refrigerator fridge 12 volt cooler.
- Multiple Protection Refrigerator car charger undergo multi-test to ensure safe and keep dangerous away. We guarantee this car freezer dc charger will power your Car Freezer efficiently.
- High Quality The exclusive charging technology used DC power cord provides the fastest charging speed. Exquisite design, space saving, simple installation male cigarette lighter plug for car freezer. High-Quality material ensures transmission in a stable situation.
- Compatible with Most Brands 12V Car refrigerator DC power cord fit for BODEGA, AstroAI, Euhomy, BougeRV, JOYTUTUS, Alpicool, ARB, ICECO, Setpower, Aspenora, Kalamera, F40C4TMP, Wagam, AUTOOMMO, ect. PLEASE NOTE: This Car adapter is not compatible with all car fridge and car cooler. Please check the power cord of your car freezer before purchasing.
- Length for Charging Cable This 12 Volt Refrigerator Power Cable is (2.4m/94.5in) long enough for use in the car, camping, picnics and traveling.
- See more on Amazon...
Brand: ISINFLASH | Manufacturer: ISINFLASH
Dimensions: 1.00 x 1.00 x 1.00 inches
Warranty: 2 years
See On Amazon #18
ISINFLASH Ignition Switch Lock Cylinder Assembly with 2 Keys Compatible with Honda Accord 2005-2007, CR-V 2005-2007, Replace OE 35100-SDA-A71, 06350-SAA-G30
Asin: B0CRRQKP21
【Attention 1】This Ignition Switch Lock Cylinder Can't Work With Manual Transmission. Can't Be Compatible With Civic 2-Door 2003-2005, Odyssey 2003-2004 And Cr-V 2003-2004..
【Chip Id48 Keys】Ignition Switch Lock Cylinder Is Universal For Honda Models (03-11), While Different Kinds Of Chips Fit Different Years. We Only Offer Ignition Switch Lock Cylinder With Chip Id 48 Keys. Please Kindly Check The Model Before Ordering..
【Attention 2】There Is A Chip Inside The Key. The Chip You Will Receive Is 48, But Not Programmed. The Chip Key Must Match The Engine To Start The Car. So You Have To Ask Your Local Locksmith To Do The Programming..
【Replacement Oe Numbers】35100-Sda-A71, 06350-Saa-G30..
Features
- Compatible with Honda Vehicles ISINFLASH Switch lock cylinder fit for Honda Accord 2003-2005(48chip), Accord 2006-2007(8E chip), Accord 2008-2011(46 electronic chips), CRV 2005-2006(48chip), CRV 2007-2010(46 electronic chips), Fit 2003-2005(48chip), Fit 2006-2008(8E chip), Fit 2009-2011(46 electronic chips), Odyssey 2005-2008 (48chip), Odyssey 2009-2011(46 electronic chips), Civic 2006-2011 (46 electronic chips).
- Replacement OE Numbers 35100-SDA-A71, 06350-SAA-G30.
- Attention 1 This Ignition switch lock cylinder can't work with manual transmission. Can't be compatible with Civic 2-Door 2003-2005, Odyssey 2003-2004 and CR-V 2003-2004.
- Attention 2 There is a chip inside the key. The chip you will receive is 48, but not programmed. The chip key must match the engine to start the car. So you have to ask your local locksmith to do the programming.
- Chip ID48 keys Ignition switch lock cylinder is universal for Honda models (03-11), while different kinds of chips fit different years. We only offer ignition switch lock cylinder with chip ID 48 keys. Please kindly check the model before ordering.
- See more on Amazon...
Brand: ISINFLASH | Manufacturer: ISINFLASH
Warranty: 2 years
See On Amazon #19
ISINFLASH Dual Wheel Separator Tool Kit, Dual Wheel Separator Tool Set with 11 Threads, One-Piece Pusher Wheel Hub Removal Tool, Fits Most Truck, Bus, Van or Trailer Dual Steel Wheels
Asin: B0CRVFZZNM | Model: 9060230 | PartNumber: 9060230
【High Quality Material】Dual Wheel Separator Tool Set Made Of #45 Carbon Steel, The Surface With Heat Treated And Blackened For Even Greater Strength And Durability While Anti-Rust To Extend The Service Life..
【Easy To Storage】You Will Receive A Heavy-Duty Storage Case For Dual Wheel Separator Tool Set Which Crafted From High-Quality Abs Hard Plastic For The Amateur Or Professional Mechanic On The Go. Conveniently Keeps All Your Tools In One Organized And Secure Place..
【Excellent Construction】Excellent "One-Piece" Pusher Structure Not Only Makes It Not Fall Apart During Use, Also Adopts Ball Bearing Drive, So That The Turning Resistance Tends To Zero, More Convenient To Operate & Easy To Disassemble..
【Safe & Fast Separation】Isinflash Dual Wheel Separator Tool Kit Is Specifically Designed To Safely, Easily & Quickly Remove Stuck Or Frozen Dual Steel Wheels From Vehicles. If You Want To Make The Work Better Then Could Apply Some Lubricant To The Threads..
Features
- Universal Suitable for almost all large trucks, trailers and smaller light trucks with dual steel wheels. It can be used with any 1-1/8" diameter wrench with standard threads.
- Safe & Fast Separation ISINFLASH Dual wheel separator tool kit is specifically designed to safely, easily & quickly remove stuck or frozen dual steel wheels from vehicles. If you want to make the work better then could apply some lubricant to the threads.
- High Quality Material Dual Wheel Separator Tool Set made of #45 Carbon steel, the surface with heat treated and blackened for even greater strength and durability while anti-rust to extend the service life.
- Excellent Construction Excellent one-piece pusher structure not only makes it not fall apart during use, also adopts ball bearing drive, so that the turning resistance tends to zero, more convenient to operate & easy to disassemble.
- Easy to Storage You will receive a heavy-duty storage case for Dual Wheel Separator Tool Set which crafted from high-quality ABS hard plastic for the amateur or professional mechanic on the go. Conveniently keeps all your tools in one organized and secure place.
- See more on Amazon...
Brand: ISINFLASH | Manufacturer: ISINFLASH
Warranty: 2 year
See On Amazon #20
ISINFLASH Universal Press and Pull Sleeve Remove Install Tool Bushes Bearings Kit, Bushing Installation and Removal Tool Set, Bushes Bearings Tool Kit Compatible with Cars LCV and HGV Engines, 26pc
Asin: B0CRV932S2 | Model: 8197411 | PartNumber: 8197411
【Compatible Vehicles】Applicable To Many Cars And Lcv, Hgv Engines..
【Easy To Storage】You Will Receive A Heavy-Duty Storage Case Which Crafted From High-Quality Abs Hard Plastic For The Amateur Or Professional Mechanic On The Go. Conveniently Keeps All Your Tools In One Organized And Secure Place..
【Package Including】20 X Press Sleeves, Inside Diameter From 34-72Mm In 2Mm Steps, Outside Diameter From 44-82Mm In 2Mm Steps, 4 X Pulling Spindles With Nuts And Thrust Bearings (M10. M12. M14. M16)..
【26Pcs Universal Press & Pull Sleeve Kit】For The Removal And Installation Of Bushes/Bearings And Seals Etc., Remove And Install For Bearing Bushes, Silent Bearing, Hydraulic Bearing, Rubber Bearing..
Features
- Durable Material ISINFLASH tool kit is created from rugged drop forged construction and heat-treated to withstand difficult and rugged, and helps the tool kit achieve high hardness and good wear resistance, which can provide a long last lifetime.
- 26pcs Universal Press & Pull Sleeve Kit For the removal and installation of bushes/bearings and seals etc., remove and install for bearing bushes, silent bearing, hydraulic bearing, rubber bearing.
- Compatible Vehicles Applicable to many cars and LCV, HGV engines.
- Package Including 20 x Press Sleeves, Inside diameter from 34-72mm in 2mm steps, Outside Diameter from 44-82mm in 2mm steps, 4 x Pulling Spindles with nuts and thrust bearings (M10. M12. M14. M16).
- Easy to Storage You will receive a heavy-duty storage case which crafted from high-quality ABS hard plastic for the amateur or professional mechanic on the go. Conveniently keeps all your tools in one organized and secure place.
- See more on Amazon...
Brand: ISINFLASH | Manufacturer: ISINFLASH
Warranty: 2 years
See On Amazon #21
645-943 68064998AA, 3-Wire Connector for Dodge Challenger Durango Ram for Jeep Compass Grand Cherokee 2009-2018 Waterproof Connector
Asin: B0CS5D3BV4 | Model: 8373003 | PartNumber: 8373003
【Excellent Quality】68064998Aa 3 Wire Electrical Pigtail Connector Made Of Insulated Material, High Strand Count Copper Core, Ultra-Low Impedance, High Efficiency Can Withstand Temperature Extremes From -60 To 200°C And Is Rigorously Tested To Ensure Reliability And Durability..
【Easy To Install】This Electrical Pigtail Connector Harness Can Be Directly Replaced And Installed, Saving Time And Effort, Direct Replace, Professional Installation Is Highly Recommended..
【Features】The 68064998Aa 3-Wire Connector Is A Standard Connector That Matches The Vehicle's Original Wiring Configuration, Ensuring A Stable Connection Between Vehicle Components And Maintaining Optimal Vehicle Performance..
【Compatible Vehicle】645-943 3 Wire Pigtail - Watertight Male Connector Fit For Dodge Caliber 2009 2010 2011, Challenger 2011, Charger 2011, Durango 2011 2014 2015 2016 2017 2018, For Dodge Ram 1500 2009 2010 201 2012 2013 2014 2015 2016 2017 2018, Ram 2500 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018, Ram 3500 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018, For Jeep Compass 2009 2010 2011 2012 2013 2014 2015 2016 2017, Grand Cherokee 2011 2012..
Features
- Replaces OE Part 645-943, 68064998AA.
- Compatible Vehicle 645-943 3 Wire pigtail - watertight male connector fit for Dodge Caliber 2009 2010 2011, Challenger 2011, Charger 2011, Durango 2011 2014 2015 2016 2017 2018, for Dodge Ram 1500 2009 2010 201 2012 2013 2014 2015 2016 2017 2018, Ram 2500 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018, Ram 3500 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018, for Jeep Compass 2009 2010 2011 2012 2013 2014 2015 2016 2017, Grand Cherokee 2011 2012.
- Excellent Quality 68064998AA 3 Wire electrical pigtail connector made of insulated material, high strand count copper core, ultra-low impedance, high efficiency can withstand temperature extremes from -60 to 200 C and is rigorously tested to ensure reliability and durability.
- Features The 68064998AA 3-Wire connector is a standard connector that matches the vehicle's original wiring configuration, ensuring a stable connection between vehicle components and maintaining optimal vehicle performance.
- Easy to Install This electrical pigtail connector harness can be directly replaced and installed, saving time and effort, direct replace, professional Installation is highly recommended.
- See more on Amazon...
Brand: ISINFLASH | Manufacturer: ISINFLASH
Warranty: 2 year
See On Amazon #22
ISINFLASH Nano Sparkle Cloth for Car Scratches, 2024 Nano Sparkle Cloth Car Scratch Remover Cloth Upgrade, Multi-Purpose Nano Magic Cloth Easy to Repair Small Scratched Water Spots for All Car 2pcs
Asin: B0CS5KSKFC | Model: 4722436 | PartNumber: 4722436
【Super Wide Applications】The Nanosparkle Cloth Can Be Used On Glass, Paint, Plastic And Metal Surfaces. If Your Car Is A Large Off-Road Vehicle, Mini Car, Motorcycle Or Rv, Blue, Red, White, Black Or Other Colors, The Cleaning Cloth Can Quickly Repair Stains And Scratches And Create Bright Colors For Your Car..
【Easy Carry & Use】2 Pieces Of Nano Cloth Are Included In The Package. Because Of Small Size, You Can Easily Store It In Your Car Or At Home And Carry It With You..
【Warm Tips】Nano Luminous Fabric Is Not Washable, The Application Area Must Be Dry And Clean. If The Nano Cloth Falls On The Floor And Becomes Covered With Dust Or Sand, Please Do Not Reuse It. Put It In The Bag After Use And Be Sure To Close The Bag..
【Update For Light Car Scratches】Magic Cloth Car Uses Advanced Nano Repair Technology. It Can Not Only Remove Scratches, But Also Restore The Gloss And Luster Of Paint And Restore Its Original Brilliance! Special Friction Compounds Will Remove Water Spots,Oxidation And Other Contaminants In The Paint And Protect Paint Surfaces..
Features
- Adcanced Nano Technology Nano sparkle cloth is made of nano technology and has super fine and soft hairs that do not scratch the surface. The scratch wipe can be repeated 10-15 times for every car color and model, it is easy to use and inexpensive. Nano cloth scratch remover is the best choice for car care.
- Update for Light Car Scratches Magic cloth car uses advanced nano repair technology. It can not only remove scratches, but also restore the gloss and luster of paint and restore its original brilliance! Special friction compounds will remove water spots,oxidation and other contaminants in the paint and protect paint surfaces.
- Super Wide Applications The nanosparkle cloth can be used on glass, paint, plastic and metal surfaces. If your car is a large off-road vehicle, mini car, motorcycle or RV, blue, red, white, black or other colors, the cleaning cloth can quickly repair stains and scratches and create bright colors for your car.
- Warm Tips Nano luminous fabric is not washable, the application area must be dry and clean. If the nano cloth falls on the floor and becomes covered with dust or sand, please do not reuse it. Put it in the bag after use and be sure to close the bag.
- Easy Carry & Use 2 pieces of nano cloth are included in the package. Because of small size, you can easily store it in your car or at home and carry it with you.
- See more on Amazon...
Brand: ISINFLASH | Manufacturer: ISINFLASH
Warranty: 2 year
See On Amazon #23
ISINFLASH Rear Air Suspension Spring Bags Replacement Fit for Dodge Ram 1500 2013-2020, for Dodge Ram 1500 Classic 2019-2020, OE Number 4877136AA 4877136AB 68248948AA, Left and Right Part, 1 Pair
Asin: B0CRSQPF83 | Model: 4874658 | PartNumber: 4874658
【High Quality】Upgraded Rear Airbag Suspension. It Is Made Of Aluminum, Iron, Alloy And Rubber, Combined With Advanced Sol-Gel Technology, Which Is Corrosion Resistant And Can Withstand Rain, Mud And Dirt For A Long Time..
【Easy To Install】Same Quality As Oem : 1 X Rear Left And 1 X Rear Right Air Suspension Parts, Replaces The Original Air Spring Directly And Equal The Original Quality. Direct Replacement For Oem Strut Without Modification. Air Suspension Bags Allow For A Much Smoother Ride Over Metal Coil Springs And Improve The Ride Height Based On The Load Weight And Vehicle’S Speed..
【Safety And Comfort】These Air Springs Are Perfect Replacements For The Originals, Reduces Noise And Greatly Absorbs Vibration As Well As Absorbing Vibrations, Maximum Ride Comfort And Braking, Blends Perfectly With Your Vehicle..
【Oe Part Number】68248948Aa, 4877136Aa, 04877136Aa, 4877136Ab, 04877136Ab..
Features
- Compatible with 2013 2014 2015 2016 2017 2018 Dodge Ram 1500 3.0L V6 - Diesel, 2013 2014 2015 2016 2017 2018 Dodge Ram 1500 3.6L V6 - Flex, 2013 2014 2015 2016 2017 2018 Dodge Ram 1500 5.7L V8 - Gas, 2019-2020 Dodge Ram 1500 Classic 3.6L V6 - Flex, 2019-2020 Dodge Ram 1500 Classic 5.7L V8 - Gas.
- OE Part Number 68248948AA, 4877136AA, 04877136AA, 4877136AB, 04877136AB.
- High Quality Upgraded rear airbag suspension. It is made of aluminum, iron, alloy and rubber, combined with advanced sol-gel technology, which is corrosion resistant and can withstand rain, mud and dirt for a long time.
- Safety and Comfort These air springs are perfect replacements for the originals, reduces noise and greatly absorbs vibration as well as absorbing vibrations, maximum ride comfort and braking, blends perfectly with your vehicle.
- Easy to Install Same quality as OEM : 1 x rear left and 1 x rear right air suspension parts, replaces the original air spring directly and equal the original quality. Direct replacement for OEM strut without modification. Air Suspension bags allow for a much smoother ride over metal coil springs and improve the ride height based on the load weight and vehicle s speed.
- See more on Amazon...
Brand: ISINFLASH | Manufacturer: ISINFLASH
Warranty: 2 years
See On Amazon #24
Rear Door Lock Actuator Compatible with Ram Promaster 1500 2500 3500 2014 2015 2016 2017 2018, Replacement OE 68226175AB, 68169399AA, 68226175AA, 937-932
Asin: B0CRSXZFKD | Model: 4693497 | PartNumber: 4693497
【Perfect Fit】Engineered To Provide The Same Fit And Function Of The Original Actuator On Specific Vehicle Years, Makes And Models..
【Long Lasting Life】Promaster Door Lock Actuator Constructed Of Premium Material For Long Lasting Durability And Reliability. New Rear Cargo Door Latch For A Complete Direct Replacement Cycle Testing In An Actual Vehicle Door Verifies Effective Usage For Years..
【Safety Compliant】Door Lock Actuator Has Undergone Extensive Quality And Safety Performance Testing, Part Has Undergone Simulated Crash Testing Under Government Guidelines..
【Oe Part Number】937-932, 937932, 68226175Ab, 68169399Aa, 68226175Aa. Before Placing An Order, Please Check If The Part Is Compatible With Your Vehicle..
Features
- Compatible with Ram Models Rear cargo door latch with able only fit for Ram ProMaster 1500 2500 3500 2014 2015 2016 2017 2018.
- OE Part number 937-932, 937932, 68226175AB, 68169399AA, 68226175AA. Before placing an order, please check if the part is compatible with your vehicle.
- Perfect fit Engineered to provide the same fit and function of the original actuator on specific vehicle years, makes and models.
- Safety compliant Door lock actuator has undergone extensive quality and safety performance testing, part has undergone simulated crash testing under government guidelines.
- Long Lasting Life ProMaster door lock actuator constructed of premium material for long lasting durability and reliability. New rear cargo door latch for a complete direct replacement cycle testing in an actual vehicle door verifies effective usage for years.
- See more on Amazon...
Brand: ISINFLASH | Manufacturer: ISINFLASH
See On Amazon #25
ISINFLASH Headlight Lamp Wiring Harness Compatible with Dodge Ram 1500/2500/3500/4500/5500 2009-2017, Replace OE 68193062AB 68193062AA for Light Wire Quad Halogen Only
Asin: B0CTH6KW66 | Model: 8860791 | PartNumber: 8860791
【Superior Quality】Headlight Lamp Wiring Harness Light Wire Is Made Of High Standard Specification Copper Wire With Excellent Conductivity, Combined With Wear-Resistant And Sturdy Plastic Protection Sleeve Can Well Prevent Leakage And Meet Or Exceed The Original Factory Standard Ensure Reliable Performance And Long Service Life..
【Easy Installation】68193062Aa Headlight Lamp Wiring Harness Easy To Install, Direct Replacement, Plug-And-Play, Just Need To Align The Buckle With The Insert, Firm And Not Easy To Fall Off..
【Replacement Time】When Your Car Headlights Do Not Work, It Is Possible That The Wiring Harness Is Broken, The Headlight Wiring Harness Will Wear Over Time, Should Be Checked And Replaced In Time..
【Compatible Vehicle】Isinflash Headlight Lamp Wiring Harness Compatible With Dodge Ram 1500 2009-2018 Fit For Dodge Ram 2500/2500/3500/4500/5500 2010-2018..
Features
- Replaces Part OE Number 68193062AB, 68193062AA. Note: Only fits vehicles with option code LEM (halogen quad headlamps only).
- Compatible Vehicle ISINFLASH Headlight Lamp Wiring Harness compatible with Dodge Ram 1500 2009-2018 fit for Dodge Ram 2500/2500/3500/4500/5500 2010-2018.
- Superior Quality Headlight Lamp Wiring Harness Light Wire is made of high standard specification copper wire with excellent conductivity, combined with wear-resistant and sturdy plastic protection sleeve can well prevent leakage and meet or exceed the original factory standard ensure reliable performance and long service life.
- Replacement Time When your car headlights do not work, it is possible that the wiring harness is broken, the headlight wiring harness will wear over time, should be checked and replaced in time.
- Easy Installation 68193062AA Headlight Lamp Wiring Harness easy to install, direct replacement, plug-and-play, just need to align the buckle with the insert, firm and not easy to fall off.
- See more on Amazon...
Brand: ISINFLASH | Manufacturer: ISINFLASH
See On Amazon #26
ISINFLASH Wheel Nut Covers Bolt Caps, 24mm/0.94" Vinyl Lug Bolt Cover, Auto Hub Screw Exterior Protection Anti-Theft Cap, Dustproof Replacement Universal Decoration for Car, 20PCS Black
Asin: B0CVVJK4QQ | Model: 6274362 | PartNumber: 6274362
【Replace Oe Part】Compatible With Chevy Ls Sport T85 24Mm/0.94Inch, Replaces Gm 105661036, 9593028, 9593228..
【Easy To Install】There Are 20Pcs Lug Nut Protectors In The Package. These Covers Are Suitable For Cars With 24Mm/0.94 Inch Wheel Screws. It's Easy To Install, Just Clean Up Before Installation And Press The Nut Cover Directly Against The Bolt..
【Wide Application】These Caps Fit Most Of Vehicles Wheel 24Mm/0.94" Bolts Or Nut. Fits For Oem Hex Lug Nuts 24Mm/0.94" In Diameter. Please Kindly Measure Your Car's Bolts Before Ordering..
【High Quality Material】This Wheel Nut Cover Is Made Of High-Quality Plastic, Which Is Exquisite In Workmanship, Wear-Resistant And Durable. It Is Lightweight, Delicate In The Hand And Can Be Used For A Long Time, Providing Protection For Your Tires..
Features
- Prevent Screws Rust If car wheel screws are often exposed to rain, snow or other environments, they will easily rust, and this cover can act as a protective item against corrosion and rust of the bolt head, and protect them from dust. In addition to that, it can also decorate your wheel bolts to make them look cute and attractive.
- High Quality Material This wheel nut cover is made of high-quality plastic, which is exquisite in workmanship, wear-resistant and durable. It is lightweight, delicate in the hand and can be used for a long time, providing protection for your tires.
- Replace OE Part Compatible with Chevy LS Sport T85 24mm/0.94inch, Replaces GM 105661036, 9593028, 9593228.
- Wide Application These caps fit most of vehicles wheel 24mm/0.94 bolts or nut. Fits for OEM hex lug nuts 24mm/0.94 in diameter. Please kindly measure your car's bolts before ordering.
- Easy to Install There are 20pcs lug nut protectors in the package. These covers are suitable for cars with 24mm/0.94 inch wheel screws. It's easy to install, just clean up before installation and press the nut cover directly against the bolt.
- See more on Amazon...
Brand: ISINFLASH | Manufacturer: ISINFLASH
Warranty: 2 year
See On Amazon #27
ISINFLASH 2pcs Tow Mirrors Wiring Harness for Chevrolet Silverado 1500 2500 HD 2014-2018, for GMC Sierra 1500 2500 HD 2014-2018 Tow Mirror Adapter Harness for Cargo Running Turn Signals Light
Asin: B0CTH6FTHX | Model: 8860795 | PartNumber: 8860795
【Wiring Instructions】Blue Wire-Running Light(Pin #11), White Wire-Cargo Light(Pin #9), Red Wire-Turn Signal(Pin #41), Black Wire-Ground(Ground To Mirror Bolt)..
【Easy To Install】Plug And Play, Direct Install Car Towing Mirrors Harness Adapter, Easy To Operate, Perfect Replacement Of Old Or Damaged Parts..
【Premium Quality】Adopting Durable Copper Wire For Better Electrical Conduction And Heat Resistance, Connect With Abs Plastic Port, Insulation Layer To Avoids Leakage And Surface Hardening. Tested & Certified To Meet Or Exceed Oem Quality Standards.All Products Are 100% Tested Before Leaving The Factory..
【Function】Tow Mirrors Wiring Harness Can Be Used On Your Cargo Lights(Reversing Lights), Turn Signals And Running Lights, Replace The Original Faulty Wiring Harness..
Features
- Compatible with Chevy & GMC ISINFLASH Tow Mirrors Wiring Harness fit for 2014-2018 Silverado 1500, 2015-2018 Silverado 2500 HD. 2014-2018 Sierra 1500, 2015-2018 Sierra 2500 HD.
- Function Tow Mirrors Wiring Harness can be used on your cargo lights(reversing lights), turn signals and running lights, replace the original faulty wiring harness.
- Wiring Instructions Blue Wire-Running Light(Pin #11), White Wire-Cargo Light(Pin #9), Red Wire-Turn Signal(Pin #41), Black Wire-Ground(Ground to Mirror Bolt).
- Premium Quality Adopting durable copper wire for better electrical conduction and heat resistance, connect with ABS plastic port, insulation layer to avoids leakage and surface hardening. Tested & Certified to Meet or Exceed OEM Quality Standards.All Products are 100% Tested Before Leaving the Factory.
- Easy to Install Plug and play, Direct install car towing mirrors harness adapter, easy to operate, perfect replacement of old or damaged parts.
- See more on Amazon...
Brand: ISINFLASH | Manufacturer: ISINFLASH
See On Amazon #28
ISINFLASH Digital Radiator Fans Controller Swith Kit 12V and 24V, Adjustable Temperature Range Digital Electric Thermatic Fan Switch Kit from 104 F to 230 F (40 C to 110 C) Replace #0444 DC0444
Asin: B0CT4QPJ9R | Model: 9446437 | PartNumber: 9446437
【Digital Radiator Fan Controller For 0444】The Temperature Sensor Is Placed In The Radiator Fin Section And Senses The Air Temperature As It Passes Through The Radiator, Has An Adjustable Temperature Range Of 40°C To 110°C (104°F To 230°F), And Displays The Temperature Reading In Either Celsius Or Fahrenheit. The 0444 Sensor Can Also Be Placed Directly Into The Cooling System With The Temperature Sensor Adapter Kit (Part Number 317-Dc-0409)..
【Specification】Digital Electric Radiator Fan Controller With Dual Relay, Led Digital Temperature Display With Actual Temperature + Set Temperature, Push Button Temperature Setting, Pre-Programmed Microcontroller Circuit Type, Dimensions: 3.75" X 2.6" X 2.2"..
【Operation】The Adjustable Fan Controller Operation Is At A Single Speed. Fan #1 Will Start Once The Temperature Reaches The Set Temperature. Fan #2 (If Applicable) Will Commence Operation 10 Seconds After Fan #1 Starts. The Fan(S) Will Continue Operating Until The Temperature Falls By 5°C Below The Set Temperature..
【Widly Application】Isinflash Fan Controller Switch Kit Can Be Used For 12 Or 24-Volt Applications, Operating 1 Or 2 Fans (If You Plan To Operate 24-Volt Fans, You Will Need To Purchase A Standard 24-Volt Relay). This Digital Radiator Fan Switch Kit Can Be Used For Thermoelectric Fans, Ewp, And Similar Models..
Features
- Replace Part Number Adjustable Digital Radiator Fan Controller Switch Kit with 12V and 24V replace 0444, DC-0444, DC0444.
- Widly Application ISINFLASH fan controller switch kit can be used for 12 or 24-volt applications, operating 1 or 2 fans (if you plan to operate 24-volt fans, you will need to purchase a standard 24-volt relay). This digital radiator fan switch kit can be used for thermoelectric fans, EWP, and similar models.
- Digital Radiator Fan Controller for 0444 The temperature sensor is placed in the radiator fin section and senses the air temperature as it passes through the radiator, has an adjustable temperature range of 40 C to 110 C (104 F to 230 F), and displays the temperature reading in either Celsius or Fahrenheit. The 0444 sensor can also be placed directly into the cooling system with the Temperature Sensor Adapter Kit (part number 317-DC-0409).
- Operation The adjustable fan controller operation is at a single speed. Fan #1 will start once the temperature reaches the set temperature. Fan #2 (if applicable) will commence operation 10 seconds after fan #1 starts. The fan(s) will continue operating until the temperature falls by 5 C below the set temperature.
- Specification Digital electric radiator fan controller with Dual Relay, LED digital temperature display with actual temperature + set temperature, Push button temperature setting, Pre-programmed microcontroller circuit type, Dimensions: 3.75 x 2.6 x 2.2.
- See more on Amazon...
Brand: ISINFLASH | Manufacturer: ISINFLASH
Dimensions: 3.94 x 5.51 x 4.33 inches
See On Amazon #29
ISINFLASH Glow Plug Repair Kit, 12V 24V 5KW 8KW Parking Diesel Heater Glow Ignition Plug Kit with Filter, Car Ceramic Heater Repair Parts Fit, Diesel Heater Accessories
Asin: B0CW3H72C3 | Model: 4162476 | PartNumber: 4162476
【Strong Heating Power】The Air Heater Glow Plug Repair Kit Has Stable Starting Performance In Cold Conditions, So You Don't Have To Worry About The Diesel Heater Fails To Start In Low Temperature Conditions..
【Package Content】The Repair Kit Includes: 1 Pc Glow Plug, 1 Pc Filter, 2 Pcs Gaskets, 3 Pcs Disassembly Tools..
【Small Size】Light In Weight, Easy To Carry And Storage With Diesel Heater, Durable In Use..
【Quality Material】The Parking Heater Glow Plug Kit Is Made Of Ceramic, Plastic And Metal, Which Has The Characteristics Of Small Volume And Light Weight..
Features
- Widly Application ISINFLASH 12V Diesel heater glow plug is a perfect replacement part for all diesel heaters available on the market, eg: berspacher Heater Airtronic D2, D4, D4S and all China 2KW 5KW 8KW Diesel Heater.
- Quality Material The Parking Heater Glow Plug Kit is made of ceramic, plastic and metal, which has the characteristics of small volume and light weight.
- Strong Heating Power The Air heater glow plug repair kit has stable starting performance in cold conditions, so you don't have to worry about the diesel heater fails to start in low temperature conditions.
- Small Size Light in weight, easy to carry and storage with Diesel Heater, Durable in use.
- Package Content The Repair kit includes: 1 PC Glow Plug, 1 PC Filter, 2 PCS Gaskets, 3 PCS Disassembly Tools.
- See more on Amazon...
Brand: ISINFLASH | Manufacturer: ISINFLASH
Warranty: 2 year
See On Amazon #30
EL3Z-14293-A Fuel Pump Fuse Relocation Terminal Kit with 2 Extra Tubes for Ford F150 3.5 3.7 4.6 5.0 6.2 V6 V8 2009-2014 Replaces 926-034 EL3Z14293A 926034
Asin: B0CS5FNLZJ | Model: 8373013 | PartNumber: 8373013
【Features】The Fuel Pump Fuse Relocation Harness Kit Allows You To Add Or Move Original Equipment Fuse Terminals To Different Locations In The Fuse Box To Improve Vehicle Performance And Reliability, And No Special Tools Are Required For Installation.
【Easy To Use】Accurate Oem Standards, Precise Positioning Of Resistors, Easy To Operate..
【High Quality】Made Of High-Quality Plastic For Lightweight, Sturdy And Durable, Long-Life Service Is Used To Replace An Overheated/Blown Fuel Pump 20 Amp Micro Fuse..
【Compatible Vehicle】This Fuel Pump Fuse Terminal Kit Fit For Ford F150 3.5L 3.7L 4.6L 5.0L 6.2L V6 V8 2009 2010 2011 2012 2013 2014..
Features
- Part Number Fuel pump fuse relocation harness kit replace 926-034, EL3Z-14293-A, EL3Z14293A.
- Compatible Vehicle This fuel pump fuse terminal kit fit for Ford F150 3.5L 3.7L 4.6L 5.0L 6.2L V6 V8 2009 2010 2011 2012 2013 2014.
- Features The fuel pump fuse relocation harness kit allows you to add or move original equipment fuse terminals to different locations in the fuse box to improve vehicle performance and reliability, and no special tools are required for installation
- High Quality Made of high-quality plastic for lightweight, sturdy and durable, long-life service is used to replace an overheated/blown fuel pump 20 amp micro fuse.
- Easy to Use Accurate OEM standards, precise positioning of resistors, easy to operate.
- See more on Amazon...
Brand: ISINFLASH | Manufacturer: ISINFLASH
Warranty: 2 year
See On Amazon