Frontpage > Brand > Inateck

Inateck - Buying Guide

Last Updated: 01/20/2019

Share on


  #1

Inateck USB 3.0 to SATA Dual-Bay USB 3.0 Hard Drive Docking Station with Offline Clone Function fit 2.5"/3.5" HDD SSD SATA (SATA I/II/ III), Support 2x 8TB and UASP, Black (FD2002)

Model: FD2002   |    Mpn: FD2002   |    Ean: 6957599311601   |    PartNumber: FD2002   |   Asin: B00N1KXE9K

HDD/SSD Off-line DuplicatorWhen cloning a hard drive, no PC is required - just plug both hard drives, press "Copy" button for several seconds until the LED will start flashing and the cloning process will begin. Progress indicator with LED: 25% - 50% - 75% - 100%.
Support UASP and SATA 6Gbps Available - The UASP Transfer Protocol only can accelerate read and write speed of SSD hard diskHigh-class chipset ASM1156, enhanced with UASP Transfer Protocol,this dock lets you get the most out of the fastest drive technologies such as SATA III (6 Gbps) with performance up to 70% faster than conventional USB 3.0 when paired with a UASP-enabled host controller.
Features- Support offline clone, no drivers needed, and easy installation- Support 2x 8TB hard drive; Supports 2.5" & 3.5" SATA (SATA I/ II/ III) HDD and SSD- Equipped with USB3.0; Support SATA III (6 Gbps) and UASP for optimal performance; Backward compatible with USB 2.0 /1.1 - Compatible Systems: Windows 2000/ XP/Vista/ 7/ 8, Mac OS 9.1/10.8.4 or above- On/Off power switch; LED light indicates Power and Activity status; Entering sleep mode without operation in 30 minutes
Attention- The target disk must be larger than the source disk.- Please backup files in target hard drive before cloning. Any files in target hard drive will be overwritten when offline clone works.- Please make sure that there aren't any bad sectors on the drives in use, as to avoid data transfer errors, overheating and damage to the station.- When one drive is working in the docking station, please do not remove the other one or insert a new one until it's finished in case of data loss. Please power off the docking station before removing.

  • USB 3.0 external, SATA-III internal, Especially made for 2.5 inch and 3.5 inch SATA HDD/SSD, USB 3.0 SuperSpeed & supports UASP, even faster data transfer
  • Integrated safeguards preventing overvoltage, leak currents, short circuits and peak voltage, interference and disturbance, guaranteed safer data transfer and access
  • Support 2x 8TB hard drive; Support offline clone, no drivers needed, easy installation; Completely new cloning technology, computer-independent duplicating/cloning without computer support possible
  • Stable and reliable DC power source: The power supply is highly efficient (12V, 3000mA), so that a stable energy supply is guaranteed; Entering sleep mode without operation in 30 minutes
  • Package Includes: 1x USB 3.0 & SSD HDD SATA Docking Station; 1x USB 3.0 Cable; 1x 12V/3A Power Adapter; 1x Manual
  • See more on Amazon...

Brand: Inateck   |   Manufacturer: Inateck

First Available: 2017-07-01

Amazon Price: $33.00
Availibility: Usually ships in 24 hours
List Price: $38.99

Warranty: 1year warranty

See Amazon Reviews | Add to your Amazon Wishlist

See More On Amazon

  #2

Inateck Superspeed 7 Ports PCI-E to USB 3.0 Expansion Card - 5 USB 3.0 Ports and 2 Rear USB 3.0 Ports Express Card Desktop with 15 Pin SATA Power Connector, Including Two Power Cables (KT5002)

Model: KTU3FR-5O2U   |    Mpn: KTU3FR-5O2U   |    Ean: 6957599307598   |    PartNumber: KTU3FR-5O2U   |   Asin: B00FPIMICA

Due to frequently updated drivers, please download the latest version on our Inateck official website to enhance your using experience.

Attention 1.) If your PC's power supply unit only has free 4pin Molex plugs left, please use the enclosed 4pin Molex to SATA converter to power the card; Please make sure the power cable strand colours match each other when connecting to the power augmentation, as to avoid faulty currents. 2.) If there is no free 15pin SATA plug available in your PC, please use the enclosed 15pin to 2x 15pin SATA Y-cable.

Features - PCI Express Expansion Card with 7 USB 3.0 Ports: With quick and easy installation, this PCI Express card expands your PC by Seven high-speed USB3.0 interfaces, offers a simple solution for connecting to USB 3.0 devices from your standard desktop PC - Support UASP: 70% Faster than traditional USB 3.0, with UASP Transfer Protocol; The UASP Transfer Protocol only can accelerate read and write speed of SSD hard disk.

Supported Operating Systems Windows XP, Vista and Windows 7 (with included drivers) Windows 8&Window 10 - No additional drivers are needed for Win8&Win10, it has built-in support for the FL1100 chipset

Package 1x USB3.0 PCI-E expansion card 1x CD Driver 1x mounting screw 1x User Manual 1x 4pin to 2x15pin cable (the cable in older computers without 15pin SATA power connector is used to 4pin convert Molex to SATA ports) 1x 15pin to 2x 15pin SATA Y-cable

Notice To ensure the PCI Express Card works properly, please first connect the PCI Express Card to your PC's power supply.

  • SuperSpeed USB 3.0 supports transfer rates of up to 5Gbps - The actual transmission speed is limited by the setting of the device connected.
  • 7 Ports USB 3.0 downstream ports for standard desktop PCs; Support Hot Plug, Plug & Play; Support LPM, Low Energy Consumption.
  • Operating System Compatibility: Windows XP, Vista, Windows 7,Windows 8 and Window 10(32/64-bit); Backwards Compatible with USB 2.0 and 1.1 devices.
  • With quick installation, this USB 3.0 PCI express Card offers a simple solution for your standard desktop PC. Enjoy copying videos, music, photos, data files at blazing fast speeds.
  • Notice: 1. It is necessary to connect the card to power supply of the PC. 2. For Windows XP/Vista Users, due to OS limitations, the real speed will be located between the level of USB 2.0 and 3.0
  • See more on Amazon...

Brand: Inateck   |   Manufacturer: Inateck

Amazon Price: $26.99
Availibility: Usually ships in 24 hours
List Price: $27.99 | Used Price: $24.99

Warranty: 1 year warranty

See Amazon Reviews | Add to your Amazon Wishlist

See More On Amazon

  #3

Inateck 2X 2.5 Inch SSD to 3.5 Inch Internal Hard Disk Drive Mounting Kit Bracket (SATA Data Cables and Power Cables Included) (ST1002S)

Model: ST1002S   |    Mpn: ST1002S   |    Ean: 6957599325899   |    PartNumber: ST1002S   |   Asin: B01FD8YJB4

Support 2.5" Hard Drives (SSD and HDD) and Fits All Popular PC Casings If you want to mount 2.5" drives into your PC and got a free 3.5" slot, then this Inateck conversion bracket is the optimal solution meeting you requirements. It fits for 2x2.5" drives providing valuable space for additional PC components. The frame bracket provides ample space for two SSDs or laptop HDDs measuring 2.5". The Inateck conversion frame is therefore an efficient solution in casings with limited space for additional storage devices, especially Mini PCs, Server racks, HTPCs or Cube cases. Attention: HDDs or SSDs are not included! Easy to Install and Disassemble Apart from the conversion frame itself, the package further includes one small magnetic screw driver and screws. This dual bracket HDD frame is moulded using high-quality alloys, is a precise fit and thus universally supports all common 2.5" drives. At the same time, an uniform appearance of the PC's internal is ensured. Please note that this mounting bracket supports side mounting only. Specific screws for holes to mount bracket in the computer case are provided in the package. It's suggested to use the screwdriver to make those holes more suitable if customized/self-owned screws is preferred. Lightning-Fast Data Transmission The data cable of the third SATA generation, also called SATA III or SATA 6G, feature a theoretical maximum bandwidth of up to 750 MB/s, while being downwards compatible as well. Apart from the conversion frame itself, the package further includes fitting power cables (ATX 4 pin to SATA), SATA data cables, one small screw driver and screws. Specifications: Color: black Material: Metal alloy Special feature: simultaneous installation of 2x 2.5" drives Compatibility: Suited for all 2,5" hard drives, mountable in PC casings with one free 3.5" slot Package contents: Dual bracket conversion frame, 2x ATX power cable, 2x SATA data cable(1 straight cable, 1 L-Type cable), 1x screw driver, 12 screws.

  • Support 2.5" hard drives (SSD and HDD) and fits all popular PC casings
  • Fit for two 2.5 drives providing valuable space for additional PC components
  • Realizing fast and interference-free data and power transmissions
  • The top speeds up to 6 Gbps. Downwards compatible with SATA I & II
  • Accessories: 1 x Mounting Kit, 1 x Screw Driver, All Screws Needed, 1x 4 Pin to Dual 15 Pin SATA Power Cable(16 cm), 1x 15 Pin to Dual 15 Pin SATA Power Cable(16 cm), 2x SATA Data Cables(48 cm)
  • See more on Amazon...

Brand: Inateck   |   Manufacturer: Inateck

First Available: 2018-12-11

Amazon Price: $8.99
Availibility: Usually ships in 24 hours
List Price: $8.99

Warranty: 1year warranty

See Amazon Reviews | Add to your Amazon Wishlist

See More On Amazon

  #4

Inateck Laptop Sleeve Compatible MacBook Pro 13 Case 2018/2017/2016 (A1989/A1706/A1708)/MacBook Air 2018/Microsoft Surface Pro 6/5/4/3 Sleeve Case Cover, Compatible iPad Pro 12.9", Dark Gray

Model: SP1003-DG   |    Mpn: SP1003-DG   |    Ean: 6957599323796   |    PartNumber: SP1003-DG   |   Asin: B071CJNFJ2

All-round Protection with style - High-quality felt outside and soft flannel inside - Lining material is mold-proof, wear-resisting and does not scratch the computer - Felt absorbs shock and protects your device at all times More than just a laptop case - One main compartment for laptop and second compartment for magazines, books, tablet, etc. - Additional: small felt bag for mouse - It is not only a carrying bag but also a sleeve to put into bag Exquisite Design while protecting the environment - Practical design and exquisite workmanship, synthetic fiber is a sustainable, plastic-free and metal-free material - Please note: Dry clean only! Package Included 1x Inateck Laptop Tablet Sleeve 1x Small Felt Bag for Mouse 1x Clean Cloth screen cleaning.

  • Designed for 13'' MacBook Pro 2018/2017/2016,MacBook Air 2018, Surface Pro 6/5/4/3, 12. 9 IPad Pro. Internal dimensions: 12. 4" x 8. 7" - 31. 5 x 22 cm; External dimensions: 12. 8" x 9. 4" - 32. 5 x 24 cm.
  • One main compartment for laptop and second compartment for magazines, books, tablet, etc. ; Two back pockets lined with flannel for cellphone, earphones, wallet, etc.
  • Lining material is mold-proof, wear-resisting and does not scratch the computer; Felt absorbs shock and protects your device at all times
  • Slim and lightweight; does not bulk your laptop up and can easily slide into your briefcase, backpack, or other bag
  • High-quality felt outside and soft flannel inside.
  • See more on Amazon...

Brand: Inateck   |   Manufacturer: Inateck

First Available: 2017-04-17

Amazon Price: $15.99
Availibility: Usually ships in 24 hours
List Price: $15.99

Warranty: 1 year warranty

See Amazon Reviews | Add to your Amazon Wishlist

See More On Amazon

  #5

Inateck Bluetooth Barcode Scanner, Working Time Approx. 15 Days, 35m Range, Automatic Fast and Precise scanning, BCST-70

Model: BCST-70   |    Mpn: BCST-70   |    Ean: 6957599324922   |    PartNumber: BCST-70   |   Asin: B074M6RTM3

How to Use No extra adapter needed. Inateck BCST-70 connects device directly via Bluetooth. Whatever your operating system is, the BCST-70 enters pairing mode after scanning the 2 correspondent barcodes in manual instruction. Edit Barcode Output Add Prefix/Suffix-32 digits of prefix/suffix are supported, which can be utilized to realize auto-linefeed, add scanning time or other necessary information. Hide Barcode- Maximum of 99 digits character at the beginning or end can be hidden. Exhibit CodeID- Distinguish/recognize different types of barcodes Multiple Scanning Modes Manual Recognition/Read Mode- Most frequently-used method, pressing button once enters one read. Auto-sensing Mode- Automatically scans barcode when put it in front of scanning window. Especially fits needs for retail stores, and inventory record in warehouses. Continuous Scanning Mode- Scans at a certain frequency. Suitable for production line at factories. Inventory Mode- Store scanning results to the scanner and count the number. Other Functions Hook: Facilitates carrying around. Capable of reading special barcodes, including FeDex, UPS, USPS, VIN(auto), and barcodes printed on plastic and steel plate. Supports HID and SPP modes. Main Parameter Light Source LED 650 +/-5nm Battery Capacity 2600mAh Decoding Rate 200 times/s Resolution 3mil Print Contrast 20% (the lower the better) Barcodoe on Cylinder Diameter 20mm Keyboard Lanaguage English/German/French/Italian/Spanish Barcodes Scannable by Default Codabar, Code 128, Code39, Code 93, Code 32,EAN-8, EAN-13, ISBN, ISSN, UPC-A, UPC-E, Industrial 25 , Interleaved 25, FedEx, and USPS. Barcodes Scannable after Setting (To scan the barcodes below, you need refer to the instruction manual, locate and scan the corresponding function barcode to make the specific barcode type enabled.) Code 11, Code 39 Full ASCII, MSI, UPC-E1, IATA 25, Matrix 25, Standard 25, China Postal Code, EAN-2, EAN-5, VIN, and Code 32. OS Supported: iOS,Android, Windows 10/8.1/8/7/Vista/XP/CE, MAC OS X, Linux, Unix, RASPBERRY PI

  • Easy to Deploy: Out of the box. Supports English, German, French, Italian, and Spanish keyboard. Compatible with POS, iOS, Android, Windows, Mac OS, Linux, and Raspberry Pi etc
  • Strong Recognition Ability: Can read various types of 1D barcode. Supports lightning scanning and upload of blurry or broken barcodes under strong and dim light
  • Prolonged Battery Life and Connection Distance: Full charge allows 15 continuous working days. Less downtime, no shift interruptions. Connection distance reaches above 35 meters
  • Built to Last: External TPUprotective case is 2 times as thick as similar products. Triple consolidation treatment is made for internal core parts
  • Special Functions: Editable prefix or suffix reaches 32 digits. Capable of hiding part of a barcode and locking upper or lower cases
  • See more on Amazon...

Brand: Inateck   |   Manufacturer: Inateck

Category Salesrank: 9708

Amazon Price: $59.99
Availibility: Usually ships in 24 hours
List Price: $59.99

Warranty: 1 year warranty

See Amazon Reviews | Add to your Amazon Wishlist

See More On Amazon

  #6

Tomons Swing Arm LED Desk Lamp, Wood Designer Table Lamp, Reading Lights for Living Room, Bedroom, Study, Office, Bedside Nightstand Lamp with 4W LED Bulb - White

Model: DL1001W   |    Mpn: DL1001W   |    Ean: 6957599316026   |    PartNumber: DL1001W   |   Asin: B016XWX3ES

Pleasing to the eye
The Tomons reading lamp was specifically designed for an optimized and above all healthy reading experience. Long and comfortable working and reading sessions are now possible, simply by flexibly adjusting the joints of the lamp exhausted and aching eyes are now a thing of the past.

Premium quality materials
To protect the environment, the materials chosen for producing the Tomons reading lamp are highly durable and of choice quality, therefore enabling you to enjoy the lamp for a long time.

  • Nature Wood Frame The body is made of solid wood, firm and chemical-free. The cable is covered with nylon, stronger and more flexible.
  • Modern Style Classic Solid wood meets iron, simple and classic style.
  • Portable & Light-weight Easy to use and store. The lamp is adjustable. You can adjust the angle and height as you wish. With the separable design, it can be stored in a small space.
  • Specification 110-220V rated power, E26 Screw socket.
  • Package 1 x Tomons desk lamp DL1001, 1 x 4W E26 Bulb, 1 x user manual
  • See more on Amazon...

Brand: tomons   |   Manufacturer: Inateck

First Available: 2015-11-01

Amazon Price: $28.99
Availibility: Usually ships in 24 hours
List Price: $28.99

Warranty: 1 year warranty

See Amazon Reviews | Add to your Amazon Wishlist

See More On Amazon

  #7

Inateck 13-13.3" Sleeve Case Cover Briefcase Ultrabook Netbook Compatible 13" MacBook Air(Including 2018 Version)/MacBook Pro(Retina) 2012-2015, 2018/2017/2016 Dark Gray (LB1302)

Model: LB1302   |    Mpn: LB1302   |    Ean: 6957599317023   |    PartNumber: LB1302   |   Asin: B01E6KXEC0

Special side zipper design new convenient version with side-zipper to put your laptop in, so you have fashionable handle bag and safe bag at your hand together. Zipped side pocket can store other accessories like notebooks, power adapter or chargers etc. Compact but multifunctional. 360&Deg; all around protection built with five layer materials, this laptop case can avoid scratches with outer lining woven, absorb bump and shock by the super soft flannelette layer and water-proofed by the SBR neoprene. Its foam padding provides your device All around protection without adding any bulk. Perfect companion This Intec LB1302 is well compatible with 13 inch MacBook Air/MacBook Pro/Pro Retina. Also, it is suitable for other laptops with the same size 13 inch if you happened to have one, E.G. Dell XPS 13. Package Included 1x 13-13.3-Inch case for 13 inch MacBook Air/MacBook Pro/Pro Retina.

  • Special side-zipper design makes your laptop far from being dropped accidentally; big side pocket can store enough accessories such as your phone, iPad, mouse, Power charger, etc.
  • With five layers of premium materials, this case is durable against Bumps or shocks;
  • Wearable woven of exterior, soft flannelette inner lining provide you laptop 360 degrees of protection;
  • The woven exterior utilizes Liquid proof 600D wear-resistant polyester fabric to protect your Device against accidental spills;
  • Internal dimensions: 13.5 X 9.4; external dimensions: 14.3 X 10. Great compatibility with 13-13.3'' Macbook Pro 2012-2015, 2018/2017/2016(a1989/A1706/A1708) MacBook Air 13, Surface Pro1/2/3/4/5, Surface Pro 2018(surface Pro 6), Surface Laptop 2017/Surface Laptop 2.
  • See more on Amazon...

Brand: Inateck   |   Manufacturer: Inateck

First Available: 2017-11-01

Amazon Price: $15.99
Availibility: Usually ships in 24 hours
List Price: $15.99

Warranty: 1 year warranty

See Amazon Reviews | Add to your Amazon Wishlist

See More On Amazon

  #8

Inateck 13-13.3" MacBook Air/Pro Retina Sleeve Carrying Case Cover Protective Bag, Water Repellent - Black (LC1300B)

Model: LC1300B   |    Mpn: LC1300B   |    Ean: 6957599314169   |    PartNumber: LC1300B   |   Asin: B00XJBCPY6

Inateck LC1300B 13 Inch MacBook Case is a well-made wear resistant and water-resistant sleeve provides stylish protection for your MacBook Air/Pro Retina from bumps and scratches while you are on the go. Attention: Do NOT fit MacBook Air/Pro Retina 13'' with a hard-shell Simple and Classic Design Being slim and lightweight, Inateck LC1300B does not bulk your MacBook up and can easily slide into your briefcase, backpack, or luggage. A smaller side pocket in the case allows you to put books or other accessories. Top-loading zipper on the case glides smoothly and provides easy access to your MacBook. Durable Materials Built with a padding layer, diving material layer in the middle and fluffy fabric lining inside absorb bumps and shocks and protect of your computer from accidental scratches. The canvas layer on front side makes this case more durable and sturdy. Built for Protection This sleek sleeve layers your MacBook with 360 of protection without any added bulk. Two zippers on top get your device slide in and out easily, while eliminating any chance of scratching. A seamless wrap of foam padding provides bottom protection for your MacBook. Security is everything. Package Included 1 Inateck 13-13.3 Inch Laptop Sleeve.

  • Internal dimensions: 12.9'' x 9''; - 33 x 23 cm; External dimensions: 13.7''; x 9.6''; - 35 x 25 cm, designed for 13.3 inch MacBook Air, 13.3 inch MacBook Pro Retina, fit for Dell XPS 13 and maybe more 13'' ultrabooks netbooks;
  • The foam padding layer and super soft fleece fabric lining absorb bumps and shocks, preventing your MacBook from accidental scratches;
  • Diving material layer in the middle and canvas layer on front side make this sleeve splash-proof;
  • Top-loading zipper on the sleeve glides smoothly and allows convenient access to your MacBook;
  • Being slim and lightweight, the case does not bulk your MacBook up and can easily slide into your briefcase, backpack, or luggage
  • See more on Amazon...

Brand: Inateck   |   Manufacturer: Inateck

First Available: 2017-11-01

Amazon Price: $9.48
Availibility: Usually ships in 24 hours
List Price: $20.00

Warranty: 1 year warranty

See Amazon Reviews | Add to your Amazon Wishlist

See More On Amazon

  #9

Inateck USB 3.0 HDD SATA External Hard Drive Disk Enclosure Case fit 9.5mm 7mm 2.5 Inch SATA HDD and SSD (FE2004)

Model: FE2004   |    Mpn: FE2004   |    Ean: 6957599311236   |    PartNumber: FE2004   |   Asin: B00JQTO8TU

Overview

Support 1pc 2.5" SATA HDD SSD Hard Drive connection to your computer through an available USB 3.0 port on your desktop or laptop. This sleek case uses ABS plastic material, opens and closes without screws, and is incredibly easy to assembly. Aside from the included USB 3.0 cable there are no additional accessories required to assemble or operate this device. Reverse compatible with USB 2.0 and 1.1.

Features

Built-in foam pad to protect your small-size hard disks effectively(For 7 mm thickness hard disks, please stick this foam pad to the upper cover for preventing vibration before you close the lid.)

Blue power supply/HDD LED activity indicator.

Suitable for 9.5mm and below thickness 2.5" SATA HDD SSD.

Compatible Operating Systems: Windows 2000/Windows Me/Windows 98/ XP /Vista/ 7/ 8/ 10, Mac OS 9.1/10.8.4 above.

Tool - Free design allow to mount Hard Drive in three second without Tools and Mounting Screws, Allow to accessing multi Hard Drives Externally and Easily.

Application

Perfect for laptop PC memory expansion; film, image and media processing, For data exchange and backup in business, education, and personal use.

Packing Content

1x Inateck USB 3.0 HDD External Enclosure

1x USB3.0 data cable

  • Great Compatibility: Works great with Windows 2000/Windows Me/Windows 98/XP/Vista/7/8/10, Mac OS 9.1/10.8.4 above
  • SuperSpeed USB 3.0: Supports transfer rates up to 5 Gbps. Up to ten times faster than USB 2.0. Backward compatible with USB 2.0/1.1 connections
  • Plug and Play: Just plug in and go! Also supports hot swap. LED light indicates Power and Activity status
  • Easy to Install: Tool free, no reboot or additional drivers needed, easy to set up and disassemble
  • Tested ABS Protection: Built-in foam pad, tested ABS plastic material, contemporary and reliable design for the best protection
  • See more on Amazon...

Brand: Inateck   |   Manufacturer: Inateck

First Available: 2017-11-16

Amazon Price: $8.99
Availibility: Usually ships in 24 hours
List Price: $8.99

Warranty: 1year warranty

See Amazon Reviews | Add to your Amazon Wishlist

See More On Amazon

  #10

Inateck Superspeed 4 Ports PCI-E to USB 3.0 Expansion Card - Interface USB 3.0 4-Port Express Card Desktop with 15 Pin SATA Power Connector, [ Include with A 4pin to 2x15pin Cable + A 15pin to 2x 15pin SATA Y-Cable ] (KT4001)

Model: KT4001   |    Mpn: KT4001   |    Ean: 6957599311274   |    PartNumber: KT4001   |   Asin: B00B6ZCNGM

Notice 1.Free Upgrade Support: Keep up to date! Download the latest drivers for free from the official Inateck website. 2.Installation: Please go to the Inateck Website to view the PCI-E Card Installation Video. 3.Please be aware that the computer cannot be booted from the USB drives connected to the PCI-E card. 4.To ensure the PCI Express Card works properly, please first connect the PCI Express Card to your PC's power supply.

Attention 1) If your PC's power supply unit has only free 4 pin Molex plugs left, please power the card using the enclosed 4 pin Molex to SATA converter. Please make sure the power cable strand colors match each other when connecting to the power augmentation to avoid a faulty current. 2) If there is no free 15 pin SATA plug available in your PC, please use the enclosed 15 pin to 2x 15 pin SATA Y-cable. 3) Aggregate transfer speed up to 500 MB/s (500 MB/s in total for the whole). For Oculus Rift users, it is recommended to purchase two PCI-E cards for multiple sensors.

PCI Express Expansion Card with 4 USB 3.0 Ports: With quick and easy installation, this PCI Express card expands your PC by four high-speed USB 3.0 interfaces.

Support UASP: 70% faster than traditional USB 3.0 with UASP. The UASP Transfer Protocol accelerates the read and write speed of the SSD hard disk.

Supported Operating Systems Windows XP, Vista and Windows 7 (with included drivers).

Windows 8/10 - No additional drivers are needed for Win8/10 and it has built-in support for the FL1100 chipset.

Package 1x USB3.0 PCI-E expansion card 1x CD Driver 1x Mounting screw 1x User Manual 1x 4pin to 2x15pin cable (the cable in older computers without 15pin SATA power connector is used to 4pin convert Molex to SATA ports) 1x 15pin to 2x 15pin SATA Y-cable

  • SuperSpeed USB 3.0 supports transfer rates of up to 5Gbps - The actual transmission speed is limited by the setting of the device connected
  • 4 USB 3.0 downstream ports for standard desktop PCs; Supports USB Hot Plug, Plug & Play; Support LPM, Low Energy Consumption; 15 pin SATA Power Connector to power USB devices from your PC power supply
  • Backwards compatible with USB 2.0 and 1.1 devices; Operating System Compatibility: Windows XP/Vista/7/8
  • With quick and easy installation. All USB 3.0 PCI-E Cards require an external connection to the power supply of the PC in order to supply voltage to the USB buss
  • See more on Amazon...

Brand: Inateck   |   Manufacturer: Inateck

Amazon Price: $22.99
Availibility: Usually ships in 24 hours
List Price: $24.99 | Used Price: $21.19

Warranty: 1 year warranty

See Amazon Reviews | Add to your Amazon Wishlist

See More On Amazon

  #11

Inateck USB 3.0 to SATA Dual Bay Hard Drive Docking Station in Gamer Style with Offline Clone Function fit 2.5/3.5 Inch SATA I/II/III HDD and SSD, Support UASP and 8 TB Drives, Black(FD2005)

 Ean: 6957599323895   |    PartNumber: FD2005-BK-US   |   Asin: B06XYL599P

Supports up to 16 TB Inateck's attractive gamer style FD2005 is an excellent solution for transferring and organizing data on SSD & HDD SATA drives. It features two docking ports that can be used simultaneously and support drive up to 16 TB!

Offline Cloning Don't have a computer? No problem! FD2005 supports computer free offline cloning! Only offline clone can be supported.

UASP Superspeed We've included the ASM1156 chip in it. This supports UASP, which means dependable, high-quality data transfers to and from your external hard drive at speeds up to 6 Gbps!

Auto-Sleep Function The FD2005's automatic sleep function is an excellent feature. It conserves energy and prevents overheating, but this wasn't enough. We had to make sure this feature was user friendly and we did just that using an intuitive LED lighting system.

Intuitive LED Lighting System The left-hand light and right-hand light will turn blue respectively when either Disk A or Disk B are inserted, and will flash when either is activated. Four blue LED lights clearly track your data's progress during offline cloning from 25% to 50%, 75% and finally 100%.

Attention -The target disk must be larger than the source disk. -Please backup files in the target hard drive before cloning. Any files in target hard drive will be overwritten when offline cloning occurs. -To avoid data transfer errors, overheating and damage to the device please make sure that there are no faulty driver cells. -To avoid data loss, do not remove or insert drives when one drive is working in the docking station. Please power off the docking station before removing.



  • 16 TB Capacity: Support up to two 8TB SATA 2.5 /3.5 hard drives simultaneously with this attractive gamer style design. Easy-to-use offline cloning function.
  • High-class Chip ASM1156: UASP and SATA III compatibility support 6 Gbps transfer speeds! Superspeed USB 3.0 supports 5 Gbps transfer speeds; 10x faster than USB 2.0!
  • Compatible OS: Compatible with Windows XP/ VISTA/ Windows 7/ 8 /8.1/ 10/ Linux/ Mac OS.
  • User Friendly: Transfer data without the hassle of drivers or installations with the lastest hot swapping/plug and play technology. Also, it will enter sleep mode after 30 minutes of inactivity.
  • Here s what you ll get: 1x USB 3.0 Docking Station; 1x USB 3.0 Type-B to USB 3.0 A Cable(1.2m); 1x DC Power Supply(12V, 3A); 1x Multilingual User Manual.
  • See more on Amazon...

Brand: Inateck   |   Manufacturer: Inateck

Amazon Price: $32.99
Availibility: Usually ships in 24 hours
List Price: $32.99

See Amazon Reviews | Add to your Amazon Wishlist

See More On Amazon

  #12

Inateck Backlit iPad Wireless Keyboard Case, Keyboard Cover Fit 9.7 Inch iPad 2018/2017 and iPad Air1 Only with Multi-Angle Stand, Black

Model: KB02002_black   |    Mpn: KB02002-BK-US   |    Ean: 6957599320894   |    PartNumber: KB02002-BK-US   |   Asin: B07DXK8YDX

Ual magnets, dual angles The keyboard features two magnets, and offering two different angles for users to place iPad. When you open the protective case and fix the iPad on the magnet, The keyboard automatically connects your iPad in one second. Convenient shortcut keys a row of shortcut keys is set to optimize your using experience. You can return to main screen, adapt brightness, adjust volume, and turning between pages with moving your hand away from the keyboard. Careful craftsmanship The protective case uses optimal PU material, Very comfortable to touch and durable in quality. It adopts x-structure design, more flexible and resilient, offering you a very comfortable and smooth-typing experience. What's in the box -Inateck backlit wireless wireless keyboard case -USB charging Cable -user manual

  • Ipad keyboard case: compatible with 9.7&Rdquo; iPad 2018 (6th generation), iPad 2017 (5th generation), as well as iPad Air 1. You can easily turn your iPad into a laptop with the wireless keyboard.
  • Smart function: The product not only supports auto-wake up and screen lock, but also automatic powering on AND off. You can activate and connect your iPad with the keyboard The moment you open the protective case.
  • Seven-color backlight: the product features a seven-color backlight and three-degree adjustable brightness. It s not only stylish, but can also help you type Under dim environments.
  • Prolonged standby time: the 800mAh Lithium battery supports a standby time of over 218 days. You can type with the keyboard for over 10 consecutive hours with backlight on, AND over 267 consecutive hours without backlight.
  • Light and compact: the product weighs 406.00G (0.90lb) in total, one third lighter than other regular tablet keyboards, which greatly facilitates carrying.
  • See more on Amazon...

Brand: Inateck   |   Manufacturer: Inateck Technology Inc

First Available: 2018-09-19

Amazon Price: $29.99
Availibility: Usually ships in 24 hours
List Price: $29.99

Warranty: 12 mouth

See Amazon Reviews | Add to your Amazon Wishlist

See More On Amazon

  #13

Inateck Universal USB 3.0 to IDE/SATA Converter Hard Drive Adapter with Power Switch fit 2.5"/3.5"SATA HDD/SSD and IDE HDD Drives Optical Drive, Support 6TB, Include 12V 2A Power Adapter and USB 3.0 Cable(UA2001)

Model: UA2001   |    Mpn: UA2001   |    Ean: 6957599311380   |    PartNumber: UA2001   |   Asin: B00MLYV5XY

Specification Product Name: Universal USB 3.0 to IDE/SATA converter with power switch Supported Drives: 2.5"/3.5" SATA HDD/SSD; 2.5"/3.5" IDE HDD; DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD+RW Compatible Systems: Windows XP/Vista/7/8/10 (32bit and 64bit); Mac OS 10.X (OTB mode isn't applicable for Windows 8 and Mac) Product Features - Dual-Head IDE Connector (40pin and 44pin) plus one SATA II Connector - Includes PC Clone Ex Lite backup and restore software, and features a button for one touch backup - One-click backup feature to effectively secure precious data; convenient, simple and practical data access and storage conversion solution for a wide range of users of both mobile and stationary PCs - Supports drives with a capacity of up to 6 TB, LED activity indicator, Plug & Play, simple, reliable and stable - On/Off Switch for HDD protection, can be switched off when not in use, easy and simple operation, efficiently enhances lifespan of your devices - Supports most models of DVD/CD drives comprising of an IDE or SATA interface on the market, burning ROM disks, system boot or installation supported Package Include - 1 x USB 3.0 to IDE+SATA Adapter - 1 x USB 3.0 CABLE - 1 x 4PIN Power Cable - 1 x Power Adapter - 1 x CD Driver Notice 1. One Touch Backup function can only be used on USB connection under Windows system (except Windows8). 2. Please connect the power supply while using the converter to ensure the stable power.

  • Compact design, versatile functions, enables access to three drives simultaneously; All-new, improved upgrade solution; additional power switch, blue LED for indication of operation and power status
  • The converter can support up to three drives simultaneously, it is compatible with 2.5/3.5 IDE/SATA hard drives and 5.25 IDE/SATA CD/DVD drives
  • Compatible Systems: Windows XP/Vista/7/8/10(32bit and 64bit); Mac OS 10.X (OTB mode isn't applicable for W8 and Mac)
  • SuperSpeed USB 3.0 supports transfer rates of up to 5Gbps - The actual transmission speed is limited by the setting of the device connected; Downwards compatible with USB 1.1/2.0
  • Simple, reliable and stable; Plug and play, hot swap; One Touch Backup function; On/Off Switch for HDD protection
  • See more on Amazon...

Brand: Inateck   |   Manufacturer: Inateck

First Available: 2017-06-01

Amazon Price: $26.99
Availibility: Usually ships in 24 hours
List Price: $29.99

Warranty: 1year warranty

See Amazon Reviews | Add to your Amazon Wishlist

See More On Amazon

  #14

[High-Grade Materials] Inateck 15.6 Inch Laptop Business Backpack Waterproof College Rucksack USB Charging Port/Rain Cover for Men and Women, Dark Gray

Model: CB1001S   |    Mpn: CB1001S   |    Ean: 6957599321563   |    PartNumber: CB1001S   |   Asin: B07CNXYPVG

Spacious Room There are two zipped compartments, one to take a laptop, iPad, A4 sized magazines, and other accessories; one to take several clothes, book, sunglasses, and other personal items. Two zipped small pockets can be found on the front cover to take small items like napkins, changes, headphones and etc., a perfect fit for daily commuting and short trip. Your Travel Companion Considering various inconveniences can happen when you go on a travel, Inateck has optimized the design of the backpack. A luggage strap is set on the back to help you fix the backpack on your suitcase. A high-density rain cover is packaged to relieve your worries in getting accidental splashes on rainy days. A special reflective strap offers you extra assurance when go out at nights.

  • Improved version with YKK zipper: Two main pockets are designed with dual YKK zippers, which occupies The largest share in global zipper market. More tough than your expect.
  • High-grade materials: Made from waterproof, scratch-resistant, special nylon fabric, and breathable, wear-resistant microfiber synthetic leather. Comes with a waterproof cover, double water-resistant.
  • External USB port: USB port for charging. Slide your power bank into the backpack and free your hands!
  • Multiple unique features: Keep valuable items secure with a hidden anti-theft design. Dual reflective strip offers you extra assurance when go out at nights. Chest strap can reduce pressure from your shoulder to allow a convenient carrying experience.
  • Large carrying capacity: It can hold 15.6 inch Laptop and size below. Dimension: 45 x 30 x 13 cm/ 17.7 * 11.8 * 5.1 inch.
  • See more on Amazon...

Brand: Inateck   |   Manufacturer: Inateck Technology Inc

First Available: 2018-04-26

Amazon Price: $39.99
Availibility: Usually ships in 24 hours
List Price: $39.99 | Used Price: $33.15

Warranty: 1 year Warranty

See Amazon Reviews | Add to your Amazon Wishlist

See More On Amazon

  #15

Inateck Aluminum USB 3.0 Hard Disk Drive Enclosure fit 2.5 Inch/ 3.5 Inch SATA HDD and SSD, Support UASP and 10TB Drives (FE3001)

Model: FE3001   |    Mpn: FE3001   |    Ean: 6957599312707   |    PartNumber: FE3001   |   Asin: B00UAA4J6G

Accelerate Your Backup with Turbo Speed FE3001 connects your HDD to your PC via Superspeed USB 3.0. The built-in top-grade ASM1153E chipset not only supports UASP (USB Attached SCSI Protocol) with a faster data transfer rate targeted for SSD, but also supports Serial ATA bus up to 6Gbps Signal bandwidth for even faster data backups - the possibilities are endless. High Compatibility FE3001 shows high compatibility with operating system environments Windows XP/Vista/7/8/8.1/10, Linux/Android, Mac OS. It supports all standard 2.5"/3.5" SATA I/II/III drives up to any capacity (up to 10TB Max). Downward compatible with USB 2.0/1.1 connections. Back Up Your Stuff Anytime, Anywhere FE3001 requires no reboot operation and no additional drives installation during the use. It goes anywhere - without getting in your way. Durable and Sturdy Made of Aluminum-alloy material, FE3001 is featured with an effective heat dissipation besides its ultra-light portability and exquisite craftsmanship. The non-slipping rubber pads on the four corners of the case promise provide safety on every surface. Designed with You in Mind The 12V/2A power adapter provides a stable power supply. The individual green and blue LED lights represent power and activity status. The useful accessories bag plus rubber pads and screws round up the whole package. Please note: The PCB plate must be fixed, otherwise they will rock.

  • Superspeed USB 3.0 connections up to 5 Gbps ;Built-in ASM1153E chipset supports SATA III with up to 6Gbps Signal bandwidth at for extra fast backups ; Support UASP targeted at SSD
  • Suitable Windows XP/Vista/7/8/8.1/10, Linux/Android, Mac OS 10.3 and higher. Support all standard 2.5/3.5 inch SATA I/II/III drives (up to 10TB max); backwards compatible with USB 2.0/1.1 connections
  • Internal layer of smooth and slip resistant pu leather, protection against Scratches
  • The durable aluminum-alloy material promises ultra-light portability and exquisite craftsmanship; featured with highly effective heat dissipation; non-slipping rubber pads on all four corners
  • Plug and play; Hot-swap, No reboot or additional drivers are needed; 12V/2A power adapter provides stable power supply
  • See more on Amazon...

Brand: Inateck   |   Manufacturer: Inateck

First Available: 2017-10-08

Amazon Price: $26.99
Availibility: Usually ships in 24 hours
List Price: $26.99

Warranty: 1 year warranty

See Amazon Reviews | Add to your Amazon Wishlist

See More On Amazon

  #16

Inateck 2.5 Inch USB 3.0 Hard Drive Enclosure External SATA HDD and SSD Case - Optimized for 9.5mm 7mm 2.5" SSD, Tool Free (FE2002)

Model: FBA_6957599307512   |    Mpn: FBA_6957599307512   |    Ean: 6957599311229   |    PartNumber: FBA_6957599307512   |   Asin: B00FCLG65U

Attention: Package contains an extra foam sticker for 7 mm thickness hard drives, You should attach the sticker to the original one inside the lid before you insert the hard drive; 12.5 mm hard drives might be incompatible with this product. 70% Faster than traditional USB 3.0 with UASP Transfer Protocol; The UASP Transfer Protocol only can accelerate read and write speed of SSD hard disk. Speed Test for Samsung 840 Series Pro 128GB ==== Mac OS X 10.8.4 ====== Read: 413.9 Mb/s Write: 433.4Mb/s

===== Win8 64bit====== Read: 436.2 Mb/s Write: 424.3 Mb/s

===== Win7 64bit====== Read: 315.3 Mb/s Write: 318.8 Mb/s Please Note a. If your SSD doesn't reach the desired speed, it is advised to reformat the SSD using the GPT advanced format, ensuring a basic sector size of 4 KB. If this solution does not help arbitrate the issue, it is further recommended to use the "all zero fill" option to wipe data residues on alleged "empty" sectors. b. Our HDD/SSD Enclosures are designed as USB 3.0 A Male interfaces on both ends of the usb cable,which are renown for their improved durability and stability. As the contained cable is for the enclosure, it is advised do not use it for other devices. Supports all standard 2.5'' SATA HDD SSD hard drives with a height of up to 9.5 mm; LED activity indicator Compatible Operating Systems: Windows 2000/ Me/ 98/ XP /Vista/7 /8 /10, Mac OS 9.1/10.8.4 above Application: Suitable for memory expansion with laptop PC; film, image and media processing, data exchange between computers in business, education, and household; quick and easy data backup. Package Content 1x Inateck USB 3.0 HDD Case 1x USB3.0 Cable 1x User Manual

  • Suitable for 9.5mm and below thickness 2.5 inch SATA HDD/SSD; Built-in foam pad, protect hard disk effectively; LED activity indicator
  • Support UASP Optimized For SSD; Plug & Play; Power switch offers protection to hard drives; No Drivers needed; Tool Free
  • Equipped with USB3.0 super speed up to 5Gbps - The actual transmission speed is limited by the setting of the device connected
  • Compatible with Windows 2000/Windows Me/Windows 98/ XP /Vista/ 7/ 8, Mac OS 9.1/10.8.4 above; Backward compatible with USB 2.0 /1.1 connections
  • Features ABS plastic material, contemporary and reliable design, practical and easy to use, exquisite workmanship provides excellent performance
  • See more on Amazon...

Brand: Inateck   |   Manufacturer: Inateck

Amazon Price: $13.99
Availibility: Usually ships in 24 hours
List Price: $13.99

See Amazon Reviews | Add to your Amazon Wishlist

See More On Amazon

  #17

Inateck 2.5 Inch USB 3.0 Hard Drive Disk Enclosure/ Case for 9.5mm 7mm 2.5 Inch SATA I/II/III/HDD/SSD, Support UASP and Optimized For SSD, Tool-Free

Model: FE2005   |    Mpn: FE2005   |    Ean: 6957599310659   |    PartNumber: FE2005   |   Asin: B00KYF1LLI

Attention 1. Please Note: HDD/SSD in the Pictures is not Included in the Package 2. For better fix of hard disk and stabilization of data transmission, please lock the enclosure via the switch lock button after inserting the hard disk

Overview Support one 2.5inch SATA HDD SSD Hard Drive to your computer through an available USB 3.0 port on your desktop or laptop. Aside from the included USB 3.0 cable, you do not need any additional accessories to assemble or operate your hard drive. Reverse compatible with USB 2.0 and 1.1, this enclosure is a perfect solution for data transfers or data backup! 70% Faster than traditional USB 3.0, with UASP Transfer Protocol; The UASP Transfer Protocol only can accelerate read and write speed of SSD hard disk.

Features Comprising of a top-grade Jmicron JMS578 chipset, direct conversion SATA-III to USB 3.0, HDD LED activity indicator Suitable for 9.5mm and below thickness 2.5'' SATA HDD SSD Super Speed USB3.0 offer Speed up to 5Gbps, Ten times of USB2.0 Compatible Operating Systems: Windows 2000/Windows Me/Windows 98/ XP /Vista/ 7/ 8 /10, Mac OS 9.1/10.8.4 above Automatic sleep and spin down mode, power saving and sustainable, effective protection of your drive, sleep mode entered after 10 minutes of data access inactivity Hot Swap , Plug and Play , No Reboot and Additional Driver is needed, Tool-Free Application Suitable for memory expansion with laptop PC; film, image and media processing, data exchange between computers in business, education, and household; quick and easy data backup.

Packing Content 1x Inateck USB 3.0 HDD External Enclosure 1x USB3.0 data cable 1x User Manual

  • Suitable for 2.5'' SATA HDD and SSD; Converts any 9.5mm and 7mm 2.5'' SATA HDD/SSD into an external hard drive for ultimate mobility and convenience.
  • Automatic sleep and spin down mode, power saving and sustainable, effective protection of your drive.Entering sleep mode after 10 minutes of data access inactivity.
  • USB 3.0 transfer interface, maximum transfer speeds of 5Gbps; Supports hot-swap, plug and play. LED light indicates Power and Activity status.
  • Compatible operating systems with Windows 2000/Windows Me/Windows 98/ XP /Vista/ 7/ 8, Mac OS 9.1/10.8.4 above; Backward compatible with USB 2.0 /1.1 connections.
  • Built-in foam pad, tested ABS plastic material, contemporary and reliable design for the best protection.
  • See more on Amazon...

Brand: Inateck   |   Manufacturer: Inateck

First Available: 2017-02-01

Amazon Price: $12.99
Availibility: Usually ships in 24 hours
List Price: $12.99

Warranty: 1 year warranty

See Amazon Reviews | Add to your Amazon Wishlist

See More On Amazon

  #18

Inateck 35L Travel Backpack, Anti-Theft Laptop Rucksack Flight Approved Carry-On Luggage Backpack, Fits 17 Inch Laptop - Black

 Ean: 6957599321099   |    PartNumber: BP03001-BK   |   Asin: B07F255JP9

Make your travel a breeze Tired of carrying heavy luggage when go on a travel? Inateck outdoor backpack BP03001 offers you the best solution by liberating your hands on trip. There are a chest and shoulder belts with buckle equipped to alleviate pressure on your shoulder and make your travel a breeze. Tested Quality Both handles have gone through 1000 vibration tests carrying a 20KG load (The target is set to vibrate 30 times per minute carrying a 20KG load within a vibration rage of 4 inches). The rucksack is made of abrasion-resistant, scratch-resistant, and splash-resistant material. A free rain cover is packaged to free your worries in wetting the backpack on rainy days. Notice: The main bag uses anti-theft dual zipper. Anti-theft locker is not included in the package. You need to prepare on your own if need be.

  • Large Capacity The dimensions of the backpack are 55x34x18cm (21x13x7 Inch). You can carry it onto an airplane. Sufficient room for a 17 laptop and clothes for short trip.
  • Ingenious Structure Main pocket x 2, laptop compartment x 2 (fit for a 13 tablet and 17 laptop respectively), change pocket x 2, toiletry bag x 1, and many other pockets for different purposes.
  • Easy-to-Carry The backpack is light to carry. Two handles are set both on top and one side of the backpack allowing a more flexible carrying experience. You can carry it vertically or horizontally, or by fixing it on a trolley.
  • Made to Last The backpack is made up of durable abrasion, scratch and splash resistant materials. A free rain cover is packaged for you to travel carefree on rainy days.
  • Anti-theft Design The main bag adopts a dual zipper design. The two lock heads can be locked in the middle to protect your belongings from theft. It s very convenient for you to reach your precious items.
  • See more on Amazon...

Brand: Inateck   |   Manufacturer: Inateck

Amazon Price: $56.99
Availibility: Usually ships in 24 hours
List Price: $56.99 | Used Price: $51.41

See Amazon Reviews | Add to your Amazon Wishlist

See More On Amazon

  #19

Inateck 2.4GHz 1D Wireless Barcode Scanner, 2600mAh Battery, 60m Range, Automatic scanning, P6

Model: P6-Y   |    Mpn: P6-Y   |    Ean: 6957599324632   |    PartNumber: P6-Y   |   Asin: B071GJGKQT

Intec P6 is a leading product among scanners in the field of large transmission ranges and battery endurance. What's more, it can read barcodes at extreme angles. Whether you need bar Code scanning at your retail POS, at a hospital patient's bedside, on the manufacturing production line or your warehouse, the Intec P6 will be a great fit for your specific needs. Product Features physical power switch: save energy in case of error operation. Hook ring: with a string added, Intec P6 becomes portable. Inventory mode: 5, 000 barcodes can be memorized and the number of barcodes can be counted. Automatic sensing: sensing range is 0-30cm to hide character: 1-9 characters can be hidden to add prefix/Suffix: 1-8 characters can be added volume adjustment: Mute-90db display/hide Code ID anti-corrosion shell: The cover can be cleaned with disinfectant. Main parameter 32 digit processor linear image sensor resolution: 4000 pixels light sources 650 +/-5nm battery Capacity 2600mAh weight 200g decoding Rate 220 times/s Resolution 3mil valid distance: 0.419 inch(between bar Code and beam head) print Contrast 20% (the lower the better) decoding angle roll 30 pitch 75 yaw 80 bar Code on Cylinder Diameter 20mm keyboard /German/French/Italian/Spanish barcodes scan able by default Coda bar, Code 128, Code39, Code 93, Code 32, EAN-8, EAN-13, ISBN, ISSN, UPC-A, UPC-E, industrial 25, Interleaved 25, FedEx, and USPS. Barcodes scan able after setting &nabs;(to scan the barcodes below, you need refer to the instruction manual, locate and scan the corresponding function bar Code to make the specific bar Code type enabled.) Code 11, Code 39 Full ASCII, MSI, upc-e1, IATA 25, Matrix 25, standard 25, China Postal Code, ean-2, ean-5, VIN, and Code 32. So supported: Windows 10/8.1/8/ 7/Vista/XP/CE, Mac OS X, Linux, Unix, Android (with Raspberry pi

  • Excellent decoding ability: with the intelligent machine learning algorithm invented, the P6 barcode scanner has excellent decoding abilities. Commonly used ones such as USPS, FedEx and VIN
  • 60M valid transmission: thanks to PA wireless technology The transmission range reaches 60M, 5 times longer than similar scanners. As a result, the total transmission area is up to 1800 wide
  • Huge 2600mAh capacity battery: the 2600mAh built-in battery, Plus the most advanced CPU low-energy consuming technology means continuous scanning up to 180, 000 times on a full charge
  • Professional anti-shock protection: The main part of Intec P6 is covered by 3.5-6.5mm thick TPU material, which can resist shocks and drops
  • More customized: more customizations are available on the P6 such as automatic sensing, hiding barcode character, add prefix and suffix and volume adjustment, etc.
  • See more on Amazon...

Brand: Inateck   |   Manufacturer: Inateck

First Available: 2018-11-15   |   Category Salesrank: 35137

Amazon Price: $69.99
Availibility: Usually ships in 24 hours
List Price: $78.99 | Used Price: $108.00

Warranty: 1 year warranty

See Amazon Reviews | Add to your Amazon Wishlist

See More On Amazon

  #20

Inateck 2x 2.5 Inch HDD/SSD to 3.5 Inch Internal Hard Disk Drive Mounting Kit Bracket, Including 2xSATA Data Cables and 2x Power Cables(ST1004)

 Ean: 6957599322508   |    PartNumber: ST1004-BK-US   |   Asin: B075FM9BDS

Dual Application Various kinds of 2.5" hard drives are supported to be adapted to 3.5" hard drives that fit slots in ATX cases. It's an easy way to utilize idle hard drives for additional system storage. You can either mount one single 2.5" hard drive or two 2.5" hard drives at the same time. The dual application will satisfy your various needs.. Flexible Installation Side wings are designed to be detachable for more space in operation. When two hard drives are to be mounted, side wings can be of use to fix the second hard drive. Flexible design for quick and easy installation.. All Tools Available Besides the bracket, a 4 pin to dual 15 pin SATA power cable and a 15 pin to dual 15 pin SATA power cable are included. Two 6Gbps SATA cable and one screw driver and 16 screws are also packaged. A complete set of tools is prepared to expedite your installation. More Functions Screw holes are also placed at the bottom of the bracket to support installation from the bottom, rendering the bracket more steady. There are hollow parts on the bottom and side wings to expedite heat dissipation. Parameters: Dimensions: 138*100*21mm Weight: 91.8g Material: Iron Color: Black Specifications: One hard drive or two 2.5" hard drives(under 9.5mm) Compatibility PC Case: 2.5" hard drives, fits most ATX cases and other PC cases.

  • Dual Application: The hard drive mounting kit supports installation of one single 2.5 hard drive as well as two 2.5 hard drives to a 3.5" internal drive bay.
  • Convenient Design: Dual form facilitates operation. Side wings are detachable, which can be detached when only one hard drive is mounted.
  • Complete Kit: Mounting tools are included. Two SATA III Data cables are offered and both support a bandwidth of 6Gbps, backward compatible with SATA I/II. 2 Power cables are also provided for power supply.
  • Side and Bottom Installation: Supports installation from side or bottom. Screw holes are placed at the bottom of the bracket to better support hard drives.
  • Package Content: 1 x Mounting Kit, 1 x Screw Driver, 16 x Screws, 1x 4 Pin to Dual 15 Pin SATA Power Cable, 1x 15 Pin to Dual 15 Pin SATA Power Cable, 2x SATA Data Cables, 1 x User Manual.
  • See more on Amazon...

Brand: Inateck   |   Manufacturer: Inateck

Amazon Price: $9.99
Availibility: Usually ships in 24 hours
List Price: $9.99

See Amazon Reviews | Add to your Amazon Wishlist

See More On Amazon

Home & Garden


Home Improvement


Industrial


Electronics


Office


Car & Automotive


Sporting Goods


Beauty Supplies


Health & Personal Care


Fashion


Toys and Hobby


We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.