Ishoot - Buying Guide
Last Updated: 04/23/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
iShoot Metal Lens Collar Tripod Mount Ring Compatible with Nikon Nikkor Z 180-600mm F5.6-6.3 VR, Lens Support Holder Bracket Bottom Arca-Swiss Fit Quick Release Plate for Arca Clamp Head & Stabilizer
Asin: B0CLZNP8YJ | Ean: 0717967924590 | UPC: 717967924590
3. The Quick Release Plate's Bottom Is Improved With New Design, Which Is Compatible With The Handheld Stabilizer With The Same Structure Of Arca-Swiss; Added Wavy Finger Positions And Reserved 1/4" And 3/8" Screw Holes And Stainless-Steel Anti-Slip Screws For Fixing Lens To Tripod Directly；.
5. The Tripod Ring Is Installed In The Same Way As The Original Factory, And Supports Rotating Vertical Shooting; When Rotating For Vertical Shooting, Loosen The Knob Completely; There Is A Vertical Focus Point On The Ring;.
4. The Inner Wall Of The Tripod Ring Is Pasted With A Layer Of Pvc Film, And The Lens Ring Body Adopts A Split Structure, Loosen The Knob, And Pull It Out To Unlock;.
2. The Tripod Collar Bottom Is Added 105Mm Long Arca Fit Quick Release Plate Feature, Can Be Used With 39Mm Arca-Swiss Fit Tripod Head And Clamp Directly, More Practical Than Lens Collars Without Qr-Plate;.
Features
- 1. The tripod mount ring is designed and improved according to original factory parameters; only compatible with Nikon Nikkor Z 180-600mm F5.6-6.3 VR Lens, NOT compatible with other lenses;
- 2. The tripod collar bottom is added 105mm long Arca fit quick release plate feature, can be used with 39mm Arca-Swiss fit tripod head and clamp directly, more practical than lens collars without QR-Plate;
- 3. The quick release plate's bottom is improved with new design, which is compatible with the handheld stabilizer with the same structure of Arca-Swiss; added wavy finger positions and reserved 1/4 and 3/8 screw holes and stainless-steel anti-slip screws for fixing lens to tripod directly
- 4. The inner wall of the tripod ring is pasted with a layer of PVC film, and the lens ring body adopts a split structure, loosen the knob, and pull it out to unlock;
- 5. The tripod ring is installed in the same way as the original factory, and supports rotating vertical shooting; When rotating for vertical shooting, loosen the knob completely; there is a vertical focus point on the ring;
- See more on Amazon...
Brand: iShoot | Manufacturer: iShoot
See On Amazon #2
iShoot Lens Collar Replacement Foot, Tripod Mount Rings Stand Base Compatible with Sony FE 200-600mm f/5.6-6.3 G OSS Lens SEL200600G, Built-in Arca-Swiss Fit Camera Quick Release Plate Dovetail Groove
Asin: B08398KCB6 | Model: IS-THS260 | PartNumber: IS-THS260 | Ean: 0708214154280 | UPC: 708214154280
The Bottom Of The Lens Bracket Base Is 105Mm Detachable Lengthening Quick Release Plate, With 1/4? And 3/8? Screw Holes And Stainless-Steel Anti-Slip Screws At The Bottom;.
This Lens Holder Foot Bottom Quick Release Plate Is 39Mm Arca-Swiss Fit, Compatible With Rrs / Arca-Swiss / Pmg / Wimberley / Markins / Photoclam / Sunwayfoto / Benro / Sirui / Marsace / Ishoot Ball Head Of Arca 39Mm Fit, Suitable For Ishoot Is-Jz30 / Is-Jz50 / Is-Jz64 / Is-Qj58 / Is-Qj64-Fd / Is-Jz60bk / Is-Jz70mft / Is-Jz80bk..
The Tripod Collar Mount Ring Stand Is Made Of High Quality Aviation Aluminum, Lightweight And Solid; Precisely Machined By World-Class High-End Cnc Turning Center, Surface Anodic Oxidation; Appearance And Exquisite Workmanship Is Much Better Than Similar Products Made By Mold;.
The Lens Support Stand Adopts Lightweight Design Of Hollow, With Stainless Steel Screw, Net Weight Is About 100G; It Is About 105Mm Long, 65Mm Wide And About 33Mm High;.
Features
- This lens collar replacement foot is tailor-made and compatible with Sony FE 200-600mm f/5.6-6.3 G OSS Lens SEL200600G, can't be used with other lens, otherwise, it won't fit; the tripod mount ring base is adopted the original interface standard, added quick release plate feature to the bottom, more practical than similar lens collar replacement base;
- The lens support stand adopts lightweight design of hollow, with stainless steel screw, net weight is about 100g; it is about 105mm long, 65mm wide and about 33mm high;
- The bottom of the lens bracket base is 105mm detachable lengthening quick release plate, with 1/4? and 3/8? screw holes and stainless-steel anti-slip screws at the bottom;
- The tripod collar mount ring stand is made of high quality Aviation Aluminum, lightweight and solid; precisely machined by world-class high-end CNC turning center, surface anodic oxidation; appearance and exquisite workmanship is much better than similar products made by mold;
- This lens holder foot bottom Quick Release Plate is 39mm Arca-Swiss fit, compatible with RRS / ARCA-SWISS / PMG / WIMBERLEY / MARKINS / PHOTOCLAM / SUNWAYFOTO / BENRO / SIRUI / MARSACE / ISHOOT ball head of Arca 39mm fit, suitable for iShoot IS-JZ30 / IS-JZ50 / IS-JZ64 / IS-QJ58 / IS-QJ64-FD / IS-JZ60BK / IS-JZ70MFT / IS-JZ80BK.
- See more on Amazon...
Brand: iShoot | Manufacturer: iShoot
Weight: 0.22 Pounds
See On Amazon #3
iShoot Lens Tripod Mount Ring for Tamron 100-400mm f/4.5-6.3 Di VC USD(A035) Lens, Lens Collar Support Bracket-Bottom is ARCA Fit Quick Release Plate Compatible with Tripod Ball Head of ARCA-SWISS Fit
Asin: B07HVSHQ74 | Model: 3216593021 | PartNumber: 3216593021 | Ean: 5056020296843
3. Bottom Quick Release Plate Is As Standard, Compatible With Arca-Swiss / Pmg / Wimberley / Markins / Sunwayfoto / Benro / Sirui / Marsace / Ishoot Tripod Ball Head Of Arca Fit, Suitable For Is-Jz30 / Is-Jz50 / Is-Jz64 / Is-Qj58 / Is-Qj64 / Is-Qj64-Fd / Is-Jz60bk / Is-Jz70mft / Is-Jz80bk Clamp..
5. Package Includes: 1 X Ishoot Tripod Mount Ring Is-Ta140 For Tamron 100-400Mm F/4.5-6.3 Di Vc Usd(A035) Lens (Note: The Other Items In The Photos Not Listed Here Are For Illustrating Only, Not Included).
4. Ishoot Lens Tripod Mount Ring For Tamron 100-400Mm F/4.5-6.3 Di Vc Usd(A035) Lens, Lens Collar Support Bracket-Bottom Is Arca Fit Quick Release Plate Compatible With Tripod Ball Head Of Arca-Swiss Fit;.
2. Adopt The Standard Of Original Factory, With 3M Film Inside, Inner Diameter Is About 81.5Mm, Width Is About 18Mm; Bottom Is Added Quick Release Plate Feature, Plate Length Is About 90Mm, With 1/4 And 3/8 Screw Holes And Stainless Steel Anti-Slip Screw, Net Weight Is About 180G;.
Features
- 1. The lens collar is made of aviation aluminum, CNC precisely machined, hollow-out weight reduction design, surface polished and anodized, with stainless steel screw;
- 2. Adopt the standard of original factory, with 3M film inside, inner diameter is about 81.5mm, width is about 18mm; bottom is added quick release plate feature, plate length is about 90mm, with 1/4 and 3/8 screw holes and stainless steel anti-slip screw, net weight is about 180g;
- 3. Bottom quick release plate is AS standard, compatible with ARCA-SWISS / PMG / WIMBERLEY / MARKINS / SUNWAYFOTO / BENRO / SIRUI / MARSACE / ISHOOT tripod ball head of Arca fit, suitable for IS-JZ30 / IS-JZ50 / IS-JZ64 / IS-QJ58 / IS-QJ64 / IS-QJ64-FD / IS-JZ60BK / IS-JZ70MFT / IS-JZ80BK clamp.
- 4. iShoot Lens Tripod Mount Ring for Tamron 100-400mm f/4.5-6.3 Di VC USD(A035) Lens, Lens Collar Support Bracket-Bottom is ARCA Fit Quick Release Plate Compatible with Tripod Ball Head of ARCA-SWISS Fit;
- 5. Package Includes: 1 x iShoot Tripod Mount Ring IS-TA140 for Tamron 100-400mm f/4.5-6.3 Di VC USD(A035) Lens (Note: The other items in the photos not listed here are for illustrating only, not included)
- See more on Amazon...
Brand: iShoot | Manufacturer: iShoot
Weight: 0.40 Pounds
See On Amazon #4
iShoot Metal Lens Collar Tripod Mount Ring Compatible with Canon RF 100-500mm f/4.5-7.1L is USM, Lens Support Holder Bracket Bottom is Arca-Swiss Fit Quick Release Plate Dovetail Groove
Asin: B09NPMSHLS | Ean: 0767159626047 | UPC: 767159626047
3. The Tripod Collar Bottom Is Added 60Mm Long Arca Fit Quick Release Plate Feature, Compatible With Arca-Swiss 39Mm Fit Tripod Ball Head, Panoramic Head And Clamp Directly; More Practical Than Lens Collars Without Qr-Plate;.
5. The Lens Collar Is-Rf150 Can Be Combined With Clamp Mount Converter Is-3950Pro (Sold Separately), Which Can Be Used For Hydraulic Heads With Manfrotto Structure..
4. The Lens Support Bottom Reserved 1/4" And 3/8" Screw Holes And Stainless-Steel Anti-Slip Screws For Fixing Lens To Tripod Directly;.
2. The Contact Surface Is Plastic Composite Film, Will Not Wear Lens Surface When Installed Correctly; There Should Be No Stickers On The Lens Surface Installation Position, If There Is, Remove It, Otherwise It Will Affect The Normal Installation; After Installation, It Can Be Freely Rotated Like The Original Tripod Ring;.
Features
- 1. The original structure and design of F (WIII) are adopted, and the function of quick release plate is added at the bottom; the inner wall of the tripod ring bracket is a concave-convex irregular structure, which is closely integrated with the lens; compatible with Canon RF 100-500mm f/4.5-7.1L IS USM Lens, can't be used for other lenses;
- 2. The contact surface is plastic composite film, will not wear lens surface when installed correctly; there should be no stickers on the lens surface installation position, if there is, remove it, otherwise it will affect the normal installation; after installation, it can be freely rotated like the original tripod ring;
- 3. The tripod collar bottom is added 60mm long Arca fit quick release plate feature, compatible with Arca-Swiss 39mm fit tripod ball head, panoramic head and clamp directly; more practical than lens collars without QR-Plate;
- 4. The Lens support bottom reserved 1/4 and 3/8 screw holes and stainless-steel anti-slip screws for fixing lens to tripod directly;
- 5. The lens collar IS-RF150 can be combined with clamp mount converter IS-3950PRO (Sold Separately), which can be used for hydraulic heads with Manfrotto structure.
- See more on Amazon...
Brand: iShoot | Manufacturer: iShoot
See On Amazon #5
iShoot Replacement Lens Foot IS-THS260 for Sony FE 200-600mm f/5.6-6.3 G OSS Super Telephoto Zoom E-Mount Lens SEL200600G - Arca-Swiss Style - Built-in 105mm Length Quick Release Plate
Asin: B083XBB4WJ | Model: ZP-IS-THS260 | PartNumber: ZP-IS-THS260 | Ean: 0727161968542 | UPC: 727161968542
The Lens Collar Replacement Base Is Adopted The Original Interface Standard. It Is About 105Mm Long, 65Mm Wide And About 33Mm High;.
Bottom Quick Release Plate Is As Standard, Compatible With Rrs / Arca-Swiss / Pmg / Wimberley / Markins / Photoclam / Sunwayfoto / Benro / Sirui / Marsace / Ishoot Tripod Ball Head Of Arca Fit, Suitable For Ishoot Is-Jz50 / Is-Jz64 / Is-Qj58 / Is-Qj64-Fd / Is-Z60bk / Is-Jz70mft / Is-Jz80bk / Is-Jz85..
The Length Of Quick Release Plate Is About 105Mm, With 1/4 And 3/8 Screw Holes And Stainless Steel Anti-Slip Screws;.
The Lens Tripod Mount Ring Replacement Foot Is Made Of Aviation Aluminum, Cnc Precisely Machined, Hollow-Out Weight Reduction Design, Polished And Surface Anodized, With Stainless Steel Screw;.
Features
- The lens replacement foot is tailor-made for Sony FE 200-600mm f/5.6-6.3 G OSS Lens; the net weight is about 100g;
- The lens tripod mount ring replacement foot is made of aviation aluminum, CNC precisely machined, hollow-out weight reduction design, polished and surface anodized, with stainless steel screw;
- The lens collar replacement base is adopted the original interface standard. It is about 105mm long, 65mm wide and about 33mm high;
- The length of quick release plate is about 105mm, with 1/4 and 3/8 screw holes and stainless steel anti-slip screws;
- Bottom quick release plate is AS standard, compatible with RRS / ARCA-SWISS / PMG / WIMBERLEY / MARKINS / PHOTOCLAM / SUNWAYFOTO / BENRO / SIRUI / MARSACE / ISHOOT tripod ball head of Arca fit, suitable for iShoot IS-JZ50 / IS-JZ64 / IS-QJ58 / IS-QJ64-FD / IS-Z60BK / IS-JZ70MFT / IS-JZ80BK / IS-JZ85.
- See more on Amazon...
Brand: iShoot | Manufacturer: iShoot
See On Amazon #6
iShoot Tripod Mount Ring Lens Collar Compatible with Tamron 35-150mm f/2-2.8 Di III VXD A058 E Mount, Lens Support Holder Bracket Bottom is Arca-Swiss Fit Quick Release Plate Dovetail Groove
Asin: B09QCLLSL4 | Model: FBAZHL-IS-TA35150 | PartNumber: FBAZHL-IS-TA35150 | Ean: 0767159626085 | UPC: 767159626085
3. The Tripod Collar Bottom Is Added 50Mm Long Arca Fit Quick Release Plate Feature, Compatible With Arca-Swiss 39Mm Fit Tripod Ball Head, Panoramic Head And Clamp Directly; More Practical Than Lens Collars Without Qr-Plate..
5. The Lens Collar Is-Ta35150 Can Be Combined With Clamp Mount Converter Is-3950Pro (Sold Separately), Which Can Be Used For Hydraulic Heads With Manfrotto Structure..
4. The Lens Support Bottom Reserved 1/4" And 3/8" Screw Holes And Stainless-Steel Anti-Slip Screws For Fixing Lens To Tripod Directly..
2. The Inner Wall Of The Tripod Ring Is An Irregular Ring Shape, And The Contact Surface Is Plastic Composite Film, Which Is Tightly Integrated With The Lens; The Lens Surface Installation Position Cannot Have A Sticker, If There Is, It Should Be Removed, Otherwise It Will Affect The Installation; Support Lens Rotation And Vertical Shooting;.
Features
- 1. The tripod mount ring is tailored to the lens structure, support vertical shoot, only compatible with Tamron 35-150mm f/2-2.8 Di III VXD A058 E-Mount lens, not compatible with Tamron 35-150mm f/2.8-4 Di VC OSD A043;
- 2. The inner wall of the tripod ring is an irregular ring shape, and the contact surface is plastic composite film, which is tightly integrated with the lens; the lens surface installation position cannot have a sticker, if there is, it should be removed, otherwise it will affect the installation; support lens rotation and vertical shooting;
- 3. The tripod collar bottom is added 50mm long Arca fit quick release plate feature, compatible with Arca-Swiss 39mm fit tripod ball head, panoramic head and clamp directly; more practical than lens collars without QR-Plate.
- 4. The Lens support bottom reserved 1/4 and 3/8 screw holes and stainless-steel anti-slip screws for fixing lens to tripod directly.
- 5. The lens collar IS-TA35150 can be combined with clamp mount converter IS-3950PRO (Sold Separately), which can be used for hydraulic heads with Manfrotto structure.
- See more on Amazon...
Brand: iShoot | Manufacturer: iShoot
See On Amazon #7
iShoot Lens Collar Replacement Foot Tripod Mount Ring Stand Compatible with Canon RF 600mm F11 is STM and Canon RF 800mm F11 is STM, Lens Support Bracket with Arca Fit Dovetail
Asin: B08PYY9D3V | Model: PH05-IS-THRF680 | PartNumber: PH05-IS-THRF680 | Ean: 0708214151616 | UPC: 708214151616
3. The Tripod Collar Stand Bottom Is Added 45Mm Long Arca Fit Quick Release Plate Feature, Can Be Used With 39Mm Arca-Swiss Fit Tripod Ball Head, Panoramic Head And Clamp Directly; More Practical Than Lens Collars Without Qr-Plate. The Lens Collar Base Bottom Reserved 1/4" And 3/8" Screw Holes And Stainless-Steel Anti-Slip Screw For Fixing Lens To Tripod Directly;.
5. The Tripod Mount Ring Base Is Made Of Aviation Aluminum, Precisely Machined By World-Class High-End Cnc Turning Center, Hollow-Out Weight Reduction Design, Hollowed-Out Work Processed By Multi-Diamond Cutter Finely, Lightweight And Solid, Polished And Surface Anodized Finish. The Appearance And Exquisite Workmanship Are Much Better Than Similar Products Made By Mold..
4. This Lens Collar Support Base Bottom's Dovetail Groove Is 39Mm Arca-Swiss Standard, Compatible With Rrs / Arca-Swiss / Ishoot Tripod Head And Clamp Or Arca 39Mm Fit;.
2. The Lens Collar Stand Is Made Based On The Lens Structure, The Screw Holes Are Precisely Coordinated, And The Anti-Skid Positioning Pin Is Designed. It Is Locked By Spring Screws, With Wavy Handles;.
Features
- 1. The tripod mount ring support base is tailor-made and compatible with Canon RF 600mm F11 IS STM & RF 800mm F11 IS STM, can't be used for other lenses the measuring volume of the replacement foot is about 91mm(L) x 38.5mm(W) x 31mm(H) (without screws), and net weight is about 95g;
- 2. The lens collar stand is made based on the lens structure, the screw holes are precisely coordinated, and the anti-skid positioning pin is designed. It is locked by spring screws, with wavy handles;
- 3. The tripod collar stand bottom is added 45mm long Arca fit quick release plate feature, can be used with 39mm Arca-swiss fit tripod ball head, panoramic head and clamp directly; more practical than lens collars without QR-Plate. The Lens collar base bottom reserved 1/4 and 3/8 screw holes and stainless-steel anti-slip screw for fixing lens to tripod directly;
- 4. This lens collar support base bottom's dovetail groove is 39mm Arca-Swiss standard, compatible with RRS / ARCA-SWISS / iShoot tripod head and clamp or Arca 39mm fit;
- 5. The tripod mount ring base is made of Aviation Aluminum, precisely machined by world-class high-end CNC turning center, hollow-out weight reduction design, hollowed-out work processed by Multi-Diamond Cutter finely, lightweight and solid, polished and surface anodized finish. The appearance and exquisite workmanship are much better than similar products made by mold.
- See more on Amazon...
Brand: iShoot | Manufacturer: iShoot
Weight: 0.21 pounds
See On Amazon #8
Tripod Mount Ring, iShoot 78mm Lens Collar Support for Canon EF 70-200mm f/2.8L is/II/III USM, 100-400mm f/4.5-5.6L is USM and 300mm f/4L is USM Lens, Built-in Arca-Swiss Type Quick Release Plate
Asin: B07X5FY5LR | Model: ZP05-IS-C720XB | PartNumber: ZP05-IS-C720XB | Ean: 0782429148876 | UPC: 782429148876
The Net Weight Of The Tripod Mount Ring Is About 135G, Inner Diameter Is About 78Mm, The Ring Width Is About 18Mm;.
Quick Release Plate Is As 39Mm Standard, Compatible With Rrs / Arca-Swiss / Kirk / Wimberley / Markins / Sunwayfoto / Kangrinpoche / Benro / Sirui / Marsace / Ishoot Ball Head Of Arca 39Mm Fit, Suitable For Ishoot Is-Jz30 / Is-Jz50 / Is-Jz64 / Is-Qj58 / Is-Qj64 / Is-Qj64-Fd / Is-Jz60bk / Is-Jz70mft / Is-Jz80bk..
Bottom Is 65Mm Length Quick Release Plate, With 1/4" And 3/8" Screw Holes;.
The Lens Collar Is Made Of Aviation Aluminum, Cnc Precisely Machined, Surface Anodic Oxidation; Integrated Structure, Built-In Anti-Skid Patch, Copper Knob, Stainless Steel Anti-Skid Nails;.
Features
- The lens support is referencing to and modified from Canon original standard design, bearing is enhanced, details are improved, and added the features of quick release plate, more practical;
- The lens collar is made of Aviation Aluminum, CNC precisely machined, surface anodic oxidation; integrated structure, built-in anti-skid patch, copper knob, stainless steel anti-skid nails;
- The net weight of the tripod mount ring is about 135g, inner diameter is about 78mm, the ring width is about 18mm;
- Bottom is 65mm length quick release plate, with 1/4 and 3/8 screw holes;
- Quick release plate is AS 39mm standard, compatible with RRS / ARCA-SWISS / KIRK / WIMBERLEY / MARKINS / SUNWAYFOTO / KANGRINPOCHE / BENRO / SIRUI / MARSACE / ISHOOT ball head of Arca 39mm fit, suitable for iShoot IS-JZ30 / IS-JZ50 / IS-JZ64 / IS-QJ58 / IS-QJ64 / IS-QJ64-FD / IS-JZ60BK / IS-JZ70MFT / IS-JZ80BK.
- See more on Amazon...
Brand: iShoot | Manufacturer: iShoot
See On Amazon #9
iShoot Stereo MIC DC/DV Dedicated Microphone with 3.5mm Audio Plug Compatible with Canon Nikon Digital Camera & Video Camcorder with 3.5mm Mic Jack
Asin: B08M9C6ZWR | Model: FBA-PL-MIC02 | PartNumber: FBA-PL-MIC02 | Ean: 0708214151074 | UPC: 708214151074
3. The Stereo Mic Uses Multi-Level Signal Amplification Circuit And Noise Reduction Circuit, The Output Impedance Of 500 Ohms, Suitable For Most Cameras And Camcorders; Providing Low-Cut And Sensitivity Enhancements To Meet The Requirements Of Different Occasions; Low-Cut Can Effectively Reduce Wind Noise..
5. Unique Removable Rubber Buffers Can Effectively Reduce The Noise Caused By Vibration, Providing ± 30 ° Tilt Adjustment; Cold Foot Using A Large Lock Nut With Built-In 1/4 " Copper Nut; High-Density Sponge, Weaved Signal Cable And Gold-Plated Audio Output Plug, Can Effectively Reduce Sound Transmission Noise..
4. Using One Aa Battery, With Excellent Standby Time, While Providing A Low Voltage Led Alerts; Metal Materials Cavity, Not Only Lightweight, Rugged, But Also Conducive To High-Frequency Sound Filtering Of Electromagnetic Waves And Enhancement Of High Frequency Sounds;.
2. The Stereo Microphone Uses Two Stereo Electret Capacitor Pickups, Two Separate Signal Amplification Circuits, And Acoustic Interference Tube Technology, Have Good Sensitivity And High Directivity, Pickup Effect Of Long-Distance And Excellent Directivity Can Easily Be Obtained..
Features
- 1. The microphone can be used with digital cameras & video camcorders with 3.5mm MIC Jack, and can be used with the following cameras by hot shoe directly: Compatible with Canon EOS 1DX III / 1D Mark II, 7DII / 6D II / 5D Mark IV / 5D Mark III, 90D / 80D / 70D / 800D / 750D / 700D; R6 / R5 / R1 / R / RP; Compatible with Nikon D6 / D5 / D4S, D850 / D810 / D800 / D750 / D7200 / D5500 / D5300 / D3500 / D3300; Z7 II / Z7 / Z6 II / Z6 / Z5 / Z50.
- 2. The stereo microphone uses two stereo electret capacitor pickups, two separate signal amplification circuits, and acoustic interference tube technology, have good sensitivity and high directivity, pickup effect of long-distance and excellent directivity can easily be obtained.
- 3. The stereo MIC uses multi-level signal amplification circuit and noise reduction circuit, the output impedance of 500 ohms, suitable for most cameras and camcorders; providing low-cut and sensitivity enhancements to meet the requirements of different occasions; low-cut can effectively reduce wind noise.
- 4. Using one AA battery, with excellent standby time, while providing a low voltage LED alerts; Metal materials cavity, not only lightweight, rugged, but also conducive to high-frequency sound filtering of electromagnetic waves and enhancement of high frequency sounds;
- 5. Unique removable rubber buffers can effectively reduce the noise caused by vibration, providing 30 tilt adjustment; cold foot using a large lock nut with built-in 1/4 copper nut; High-density sponge, weaved signal cable and gold-plated audio output plug, can effectively reduce sound transmission noise.
- See more on Amazon...
Brand: iShoot | Manufacturer: iShoot
See On Amazon #10
Tripod Mount Ring, iShoot Lens Collar Socket Compatible with Sigma 100-400mm f/5-6.3 DG OS HSM Contemporary Lens (EF/F Mount), Built-in Quick Release Plate for Tripod Ball Head of ARCA-Swiss Kirk Fit
Asin: B07WVVY2KX | Model: ZP01-IS-SM140 | PartNumber: ZP01-IS-SM140 | Ean: 0782429148401 | UPC: 782429148401
3. The Tripod Mount Ring Is Tailored To The Lens. Cannot Be Rotated, With 3M Film Inside, Inner Diameter Is About 84Mm, Width Is About 23Mm;.
5. Quick Release Plate Is As 39Mm Standard, Compatible With Rrs / Arca-Swiss / Kirk / Wimberley / Markins / Sunwayfoto / Kangrinpoche / Benro / Sirui / Marsace / Ishoot Tripod Ball Head Of Arca 39Mm Fit, For Ishoot Is-Jz30 / Is-Jz50 / Is-Jz64 / Is-Qj58 / Is-Qj64 / Is-Qj64-Fd / Is-Jz60bk / Is-Jz70mft / Is-Jz80bk Clamp..
4. Bottom Is Added Quick Release Plate Feature, Plate Length Is About 70Mm, With 1/4 And 3/8 Screw Holes And Stainless Steel Anti-Slip Screw, Net Weight Is About 160G;.
2. The Lens Collar Is Made Of Aviation Aluminum, Cnc Precisely Machined, Hollow-Out Weight Reduction Design, Surface Polished And Anodized, With Stainless Steel Screw;.
Features
- 1. The lens collar is tailor-made and only Compatible with Sigma 100-400mm f/5-6.3 DG OS HSM Contemporary Lens (EF and F Mount), Not Compatible with Sigma 100-400mm f/5-6.3 DG DN OS (E-mount and L-Mount) and other lenses
- 2. The lens collar is made of aviation aluminum, CNC precisely machined, hollow-out weight reduction design, surface polished and anodized, with stainless steel screw;
- 3. The tripod mount ring is tailored to the lens. Cannot be rotated, with 3M film inside, inner diameter is about 84mm, width is about 23mm;
- 4. Bottom is added quick release plate feature, plate length is about 70mm, with 1/4 and 3/8 screw holes and stainless steel anti-slip screw, net weight is about 160g;
- 5. Quick release plate is AS 39mm standard, compatible with RRS / ARCA-SWISS / KIRK / WIMBERLEY / MARKINS / SUNWAYFOTO / KANGRINPOCHE / BENRO / SIRUI / MARSACE / ISHOOT tripod ball head of Arca 39mm fit, for iShoot IS-JZ30 / IS-JZ50 / IS-JZ64 / IS-QJ58 / IS-QJ64 / IS-QJ64-FD / IS-JZ60BK / IS-JZ70MFT / IS-JZ80BK clamp.
- See more on Amazon...
Brand: iShoot | Manufacturer: iShoot
Weight: 0.35 Pounds
See On Amazon #11
iShoot Universal All Metal 150mm 4-Way Macro Focusing Rail Slider Close-up Shooting Head Camera Support Bracket Holder with Arca-Swiss Fit Clamp and Quick Release Plate in Bottom for Tripod Ballhead
Asin: B01MZACMWY | Model: 2xIS-MFR150 | PartNumber: 2xIS-MFR150 | Ean: 5056020291008, 5056020290995
3. The Width Of The Clamp On The Slider Is About 73Mm, With Spirit Level, Arca-Swiss / Rrs Standard Fit; The Slider Is About 150Mm Long, Bottom Is Designed With Quick Release Plate Structure Of Arca-Swiss / Rrs Standard Fit;.
5. Package Includes: 2 X All Metal 150Mm Macro Focusing Rail Slider Is-Mfr150 (Note: The Slider Need Be Used With Quick Release Plate Which Is Not Included In The Listing).
4. Compatible With Arca-Swiss / Rrs / Kirk / Wimberley / Markins / Sunwayfoto / Kangrinpoche / Benro/Sirui / Marsace Quick Release Plate And Ballhead Of Arca-Swiss / Rrs Standard Fit; Suitable For Is-Jz30 / Is-Jz50 / Is-Jz64 / Is-Qj58 / Is-Qj64 / Is-Jz60bk / Is-Jz70bk / Is-Jz80bk..
2. With Stainless Steel Gear Spiral Zoom Lever, Stainless Steel Clutch, Intermeshing Helical Power Transmission, Can Move Back And Forth In Precise Mm Distance For Micro-Adjustment Focusing, Convenient For Close-Up Photography Of Micro Object, The Tested Maximum Horizontal Load Weight Is About 3.4Kg;.
Features
- 1. Main body made of Aviation Aluminum, CNC precisely machined, surface anodized, the maximum size with knob is about 203mm long, 106mm wide, and 34mm high, net weight is about 420g;
- 2. With stainless steel gear spiral zoom lever, stainless steel clutch, intermeshing helical power transmission, can move back and forth in precise mm distance for micro-adjustment focusing, convenient for close-up photography of micro object, the tested maximum horizontal load weight is about 3.4kg;
- 3. The width of the clamp on the slider is about 73mm, with spirit level, Arca-Swiss / RRS standard fit; the slider is about 150mm long, bottom is designed with quick release plate structure of Arca-Swiss / RRS standard fit;
- 4. Compatible with Arca-Swiss / RRS / KIRK / WIMBERLEY / MARKINS / SUNWAYFOTO / KANGRINPOCHE / BENRO/SIRUI / MARSACE quick release plate and ballhead of Arca-Swiss / RRS standard fit; suitable for IS-JZ30 / IS-JZ50 / IS-JZ64 / IS-QJ58 / IS-QJ64 / IS-JZ60BK / IS-JZ70BK / IS-JZ80BK.
- 5. Package includes: 2 x All Metal 150mm Macro Focusing Rail Slider IS-MFR150 (Note: The slider need be used with quick release plate which is not included in the listing)
- See more on Amazon...
Brand: iShoot | Manufacturer: photoloving-amus
Weight: 0.93 Pounds
See On Amazon #12
iShoot Tripod Mount Ring, All Metal Lens Collar Support Bracket for Sigma MC-11 Mount Converter Lens Adapter of Canon EF-E Mount, Diameter 61.5mm Lens Holder with Arca Swiss fit Quick Release Plate
Asin: B085QHCVKQ | Ean: 0737838988797 | UPC: 737838988797
Inner Diameter Of The Lens Holder Is About 61.5Mm, Width Is About 20Mm; Bottom Is Added Quick Release Plate Feature, Plate Length Is About 70Mm, With 1/4 And 3/8 Screw Holes And Stainless Steel Anti-Slip Screw, Net Weight Is About 165G;.
This Lens Holder Bottom Quick Release Plate Is 39Mm Arca-Swiss Fit, Compatible With Rrs / Arca-Swiss / Pmg / Wimberley / Markins / Photoclam / Sunwayfoto / Benro / Sirui / Marsace / Ishoot Ball Head Of Arca 39Mm Fit, Suitable For Ishoot Is-Jz30 / Is-Jz50 / Is-Jz64 / Is-Qj58 / Is-Qj64-Fd / Is-Jz60bk / Is-Jz70mft / Is-Jz80bk..
The Tripod Collar Mount Ring Is Made Of High Quality Aviation Aluminum, Lightweight And Solid; Precisely Machined By World-Class High-End Cnc Turning Center, Surface Anodic Oxidation; Appearance And Exquisite Workmanship Is Much Better Than Similar Products Made By Mold;.
This Lens Support Bracket Was Customized According To The Sigma Mc-11 Mount Converter. Positioning By The Switch And Bayonet. Cannot Be Rotated. All The Corners Are Rounded. The Inside Is Covered With 3M Plastic Film To Prevent Lens Wear;.
Features
- This All Metal Tripod Mount ring is tailor-made for Sigma MC-11 Mount Converter Lens Adapter of Canon EF-E Mount;
- This lens support bracket was customized according to the Sigma MC-11 Mount Converter. Positioning by the switch and bayonet. Cannot be rotated. All the corners are rounded. The inside is covered with 3M plastic film to prevent lens wear;
- Inner diameter of the lens holder is about 61.5mm, width is about 20mm; bottom is added quick release plate feature, plate length is about 70mm, with 1/4 and 3/8 screw holes and stainless steel anti-slip screw, net weight is about 165g;
- The tripod collar mount ring is made of high quality Aviation Aluminum, lightweight and solid; precisely machined by world-class high-end CNC turning center, surface anodic oxidation; appearance and exquisite workmanship is much better than similar products made by mold;
- This lens holder bottom Quick Release Plate is 39mm Arca-Swiss fit, compatible with RRS / ARCA-SWISS / PMG / WIMBERLEY / MARKINS / PHOTOCLAM / SUNWAYFOTO / BENRO / SIRUI / MARSACE / ISHOOT ball head of Arca 39mm fit, suitable for iShoot IS-JZ30 / IS-JZ50 / IS-JZ64 / IS-QJ58 / IS-QJ64-FD / IS-JZ60BK / IS-JZ70MFT / IS-JZ80BK.
- See more on Amazon...
Brand: iShoot | Manufacturer: iShoot
Weight: 0.36 Pounds
See On Amazon #13
iShoot Metal Lens Collar Tripod Mount Ring Compatible with Tamron 35-150mm f/2-2.8 Di III VXD A058 E Mount, Lens Support Holder Bracket Bottom is Arca-Swiss Fit Quick Release Plate Dovetail Groove
Asin: B09NPPJW96 | Model: FBA-IS-TA35150 | PartNumber: FBA-IS-TA35150 | Ean: 0767159626054 | UPC: 767159626054
3. The Tripod Collar Bottom Is Added 50Mm Long Arca Fit Quick Release Plate Feature, Compatible With Arca-Swiss 39Mm Fit Tripod Ball Head, Panoramic Head And Clamp Directly; More Practical Than Lens Collars Without Qr-Plate..
5. The Lens Collar Is-Ta35150 Can Be Combined With Clamp Mount Converter Is-3950Pro (Sold Separately), Which Can Be Used For Hydraulic Heads With Manfrotto Structure..
4. The Lens Support Bottom Reserved 1/4" And 3/8" Screw Holes And Stainless-Steel Anti-Slip Screws For Fixing Lens To Tripod Directly..
2. The Inner Wall Of The Tripod Ring Is An Irregular Ring Shape, And The Contact Surface Is Plastic Composite Film, Which Is Tightly Integrated With The Lens; The Lens Surface Installation Position Cannot Have A Sticker, If There Is, It Should Be Removed, Otherwise It Will Affect The Installation; Support Lens Rotation And Vertical Shooting;.
Features
- 1. The tripod mount ring is tailored to the lens structure, support vertical shoot, only compatible with Tamron 35-150mm f/2-2.8 Di III VXD A058 E-Mount lens, not compatible with Tamron 35-150mm f/2.8-4 Di VC OSD A043;
- 2. The inner wall of the tripod ring is an irregular ring shape, and the contact surface is plastic composite film, which is tightly integrated with the lens; the lens surface installation position cannot have a sticker, if there is, it should be removed, otherwise it will affect the installation; support lens rotation and vertical shooting;
- 3. The tripod collar bottom is added 50mm long Arca fit quick release plate feature, compatible with Arca-Swiss 39mm fit tripod ball head, panoramic head and clamp directly; more practical than lens collars without QR-Plate.
- 4. The Lens support bottom reserved 1/4 and 3/8 screw holes and stainless-steel anti-slip screws for fixing lens to tripod directly.
- 5. The lens collar IS-TA35150 can be combined with clamp mount converter IS-3950PRO (Sold Separately), which can be used for hydraulic heads with Manfrotto structure.
- See more on Amazon...
Brand: iShoot | Manufacturer: iShoot
See On Amazon #14
iShoot Metal Lens Collar Tripod Mount Ring Compatible with Tamron 18-300mm f/3.5-6.3 Di III-A VC VXD B061 X/E Mount, Lens Support Holder Bracket Bottom is Arca-Swiss Fit Quick Release Plate Dovetail
Asin: B09SL3MQWP | Model: FBA-IS-TA1830 | PartNumber: FBA-IS-TA1830 | Ean: 0767159626122 | UPC: 767159626122
3. The Tripod Collar Bottom Is Added 50Mm Long Arca Fit Quick Release Plate Feature, Compatible With Arca-Swiss 39Mm Fit Tripod Ball Head, Panoramic Head And Clamp Directly; More Practical Than Lens Collars Without Qr-Plate;.
5. The Lens Collar Is-Ta1830 Can Be Combined With Clamp Mount Converter Is-3950Pro (Sold Separately), Which Can Be Used For Fluid Heads With Manfrotto Structure..
4. The Lens Support Bottom Reserved 1/4" And 3/8" Screw Holes And Stainless-Steel Anti-Slip Screws For Fixing Lens To Tripod Directly;.
2. The Contact Surface Between The Inner Wall Of The Tripod Ring And The Lens Is Plastic Composite Film, Will Not Wear Lens Surface When Installed Correctly; There Should Be No Stickers On The Lens Surface Installation Position, If There Is, Remove It, Otherwise It Will Affect The Normal Installation; Hollow-Out Weight Reduction Design, Net Weight Is About 160G;.
Features
- 1. The lens collar is tailor-made based on the lens structure, and the inner wall of the tripod ring is an irregular ring shape, only compatible with Tamron 18-300mm f/3.5-6.3 Di III-A VC VXD B061 (X Mount and E Mount) lens, cannot be used with other lens; support lens rotation and vertical shoot;
- 2. The contact surface between the inner wall of the tripod ring and the lens is plastic composite film, will not wear lens surface when installed correctly; there should be no stickers on the lens surface installation position, if there is, remove it, otherwise it will affect the normal installation; hollow-out weight reduction design, net weight is about 160g;
- 3. The tripod collar bottom is added 50mm long Arca fit quick release plate feature, compatible with Arca-Swiss 39mm fit tripod ball head, panoramic head and clamp directly; more practical than lens collars without QR-Plate;
- 4. The Lens support bottom reserved 1/4 and 3/8 screw holes and stainless-steel anti-slip screws for fixing lens to tripod directly;
- 5. The lens collar IS-TA1830 can be combined with clamp mount converter IS-3950PRO (Sold Separately), which can be used for fluid heads with Manfrotto structure.
- See more on Amazon...
Brand: iShoot | Manufacturer: iShoot
See On Amazon #15
iShoot Lens Collar Compatible with Nikon AF-S NIKKOR 200-500mm f/5.6E ED VR, Lens Tripod Mount Ring Support Bracket Holder, Bottom is ARCA Fit Quick Release Plate for Tripod Ball Head ARCA-Swiss Type
Asin: B0838XZ178 | Model: IS-N250II | PartNumber: IS-N250II | Ean: 0708214154259 | UPC: 708214154259
The Lens Support Is Referencing To And Modified From Nikon Original Standard Design. Integrated Design, Non-Slip Knob Is Larger, Reserved Finger Position. The Inner Diameter Of The Tripod Ring Is About 79.5Mm, The Width Is About 23Mm, With 3M Film Inside For Protecting The Lens From Scratches, Can Be Freely Rotated 360 Degrees;.
This Lens Holder Bottom Is 39Mm Arca Fit Quick Release Plate, Compatible With Rrs / Arca-Swiss39mm Fit Ball Head, Suitable For Ishoot Is-Jz30 / Is-Jz50 / Is-Jz64 / Is-Qj58 / Is-Qj64-Fd / Is-Jz60bk / Is-Jz70mft / Is-Jz80bk..
The Bottom Of The Lens Bracket Is 85Mm Detachable Lengthening Quick Release Plate, With 1/4” And 3/8” Screw Holes And Stainless Steel Studs At The Bottom;.
The Lens Collar Is Made Of High Quality Aviation Aluminum, Lightweight And Solid; Precisely Machined By World-Class High-End Cnc Turning Center, Surface Anodic Oxidation; Appearance And Exquisite Workmanship Is Much Better Than Similar Products Made By Mold;.
Features
- This lens tripod mount ring is tailor-made and compatible with Nikon AF-S NIKKOR 200-500mm f/5.6E ED VR; lightweight design of hollow, with stainless steel screw, net weight is about 240g;
- The lens collar is made of high quality Aviation Aluminum, lightweight and solid; precisely machined by world-class high-end CNC turning center, surface anodic oxidation; appearance and exquisite workmanship is much better than similar products made by mold;
- The lens support is referencing to and modified from Nikon original standard design. Integrated design, non-slip knob is larger, reserved finger position. The inner diameter of the tripod ring is about 79.5mm, the width is about 23mm, with 3M film inside for protecting the lens from scratches, can be freely rotated 360 degrees;
- The bottom of the lens bracket is 85mm detachable lengthening quick release plate, with 1/4 and 3/8 screw holes and stainless steel studs at the bottom;
- This lens holder bottom is 39mm Arca fit Quick Release Plate, compatible with RRS / ARCA-SWISS39mm fit ball head, suitable for iShoot IS-JZ30 / IS-JZ50 / IS-JZ64 / IS-QJ58 / IS-QJ64-FD / IS-JZ60BK / IS-JZ70MFT / IS-JZ80BK.
- See more on Amazon...
Brand: iShoot | Manufacturer: iShoot
Weight: 0.55 pounds
See On Amazon #16
iShoot Tripod Mount Ring Base, Lens Collar Foot Support Stand Compatible with Canon RF 600mm F11 IS STM and Canon RF 800mm F11 IS STM, Lens Holder with 39mm Arca-Swiss Fit Quick Release Plate Dovetail
Asin: B08SBPW63Q | Model: FBA-IS-THRF680 | PartNumber: FBA-IS-THRF680 | Ean: 0708214152002 | UPC: 708214152002
3. The Tripod Collar Stand Bottom Is Added 45Mm Long Arca Fit Quick Release Plate Feature, Can Be Used With 39Mm Arca-Swiss Fit Tripod Ball Head, Panoramic Head And Clamp Directly; More Practical Than Lens Collars Without Qr-Plate. The Lens Collar Base Bottom Reserved 1/4" And 3/8" Screw Holes And Stainless-Steel Anti-Slip Screw For Fixing Lens To Tripod Directly;.
5. The Tripod Mount Ring Base Is Made Of Aviation Aluminum, Precisely Machined By World-Class High-End Cnc Turning Center, Hollow-Out Weight Reduction Design, Hollowed-Out Work Processed By Multi-Diamond Cutter Finely, Lightweight And Solid, Polished And Surface Anodized Finish. The Appearance And Exquisite Workmanship Are Much Better Than Similar Products Made By Mold..
4. This Lens Collar Support Base Bottom's Dovetail Groove Is 39Mm Arca-Swiss Standard, Compatible With Rrs / Arca-Swiss / Pmg / Wimberley / Markins / Photoclam / Sunwayfoto / Benro / Sirui / Marsace / Ishoot Ball Head Of Arca 39Mm Fit, Suitable For Ishoot Is-Jz30 / Is-Jz50 / Is-Jz64 / Is-Qj58 / Is-Qj64-Fd / Is-Jz60bk / Is-Jz70mft / Is-Jz80bk;.
2. The Lens Collar Stand Is Made Based On The Lens Structure, The Screw Holes Are Precisely Coordinated, And The Anti-Skid Positioning Pin Is Designed. It Is Locked By Spring Screws, With Wavy Handles;.
Features
- 1. The tripod mount ring support foot is tailor-made and compatible with Canon RF 600mm F11 IS STM and Canon RF 800mm F11 IS STM, can't be used for other lenses. The measuring volume of the replacement foot is about 91mm(L) x 38.5mm(W) x 31mm(H) (without screws), and net weight is about 95g; couldn't be put in some camera bag due to size limit;
- 2. The lens collar stand is made based on the lens structure, the screw holes are precisely coordinated, and the anti-skid positioning pin is designed. It is locked by spring screws, with wavy handles;
- 3. The tripod collar stand bottom is added 45mm long Arca fit quick release plate feature, can be used with 39mm Arca-swiss fit tripod ball head, panoramic head and clamp directly; more practical than lens collars without QR-Plate. The Lens collar base bottom reserved 1/4 and 3/8 screw holes and stainless-steel anti-slip screw for fixing lens to tripod directly;
- 4. This lens collar support base bottom's dovetail groove is 39mm Arca-Swiss standard, compatible with RRS / ARCA-SWISS / PMG / WIMBERLEY / MARKINS / PHOTOCLAM / SUNWAYFOTO / BENRO / SIRUI / MARSACE / ISHOOT ball head of Arca 39mm fit, suitable for iShoot IS-JZ30 / IS-JZ50 / IS-JZ64 / IS-QJ58 / IS-QJ64-FD / IS-JZ60BK / IS-JZ70MFT / IS-JZ80BK;
- 5. The tripod mount ring base is made of Aviation Aluminum, precisely machined by world-class high-end CNC turning center, hollow-out weight reduction design, hollowed-out work processed by Multi-Diamond Cutter finely, lightweight and solid, polished and surface anodized finish. The appearance and exquisite workmanship are much better than similar products made by mold.
- See more on Amazon...
Brand: iShoot | Manufacturer: iShoot
See On Amazon #17
iShoot Improved Universal 150mm Macro Focusing Rail Slider Close-up Shooting Head All Metal Camera Support Bracket Holder, Built-in Arca-Swiss Type Clamp and Quick Release Plate for Tripod Ballhead
Asin: B07QSDXSVJ | Model: ZP-IS-MFR150 | PartNumber: ZP-IS-MFR150 | Ean: 5056020291138
The Close-Up Shooting Head With Stainless Steel Gear Spiral Zoom Lever, Stainless Steel Clutch, Intermeshing Helical Power Transmission, Can Move Back And Forth In Precise Mm Distance For Micro-Adjustment Focusing, Convenient For Close-Up Photography Of Micro Object, The Tested Maximum Horizontal Load Weight Is About 3.4Kg;.
The Macro Focusing Rail Slider Compatible With Arca-Swiss / Rrs / Kirk / Wimberley / Markins / Sunwayfoto / Kangrinpoche / Benro/Sirui / Marsace Quick Release Plate And Ballhead Of Arca-Swiss / Rrs Standard Fit; Suitable For Ishoot Is-Jz30 / Is-Jz50 / Is-Jz64 / Is-Qj58 / Is-Qj64 / Is-Jz60bk / Is-Jz70bk / Is-Jz80bk..
The Width Of The Clamp On The Close-Up Shooting Slider Is About 73Mm, With Spirit Level, Arca-Swiss / Rrs Standard Fit; The Slider Is About 150Mm Long, Bottom Is Designed With Quick Release Plate Structure Of Arca-Swiss / Rrs Standard Fit;.
Two Same Macro Focusing Rail Sliders Can Be Combined Together To Form 90 Degrees, Becoming A 4-Way Macro Focusing Rail Slider, And Providing A Vertical Moving Distance Of About 118Mm And Horizontal Moving Distance Of About 118Mm, Better For Macro Shooting. Please Check The Ninth Photo For Reference;.
Features
- The main body of this improved macro focusing rail slider is made of Aviation Aluminum, CNC precisely machined, surface anodized; the max size with knob is about 203mm long, 106mm wide, and 34mm high, net weight is about 420g;
- Two same macro focusing rail sliders can be combined together to form 90 degrees, becoming a 4-way macro focusing rail slider, and providing a vertical moving distance of about 118mm and horizontal moving distance of about 118mm, better for macro shooting. Please check the Ninth Photo for reference;
- The close-up shooting head with stainless steel gear spiral zoom lever, stainless steel clutch, intermeshing helical power transmission, can move back and forth in precise mm distance for micro-adjustment focusing, convenient for close-up photography of micro object, the tested maximum horizontal load weight is about 3.4kg;
- The width of the clamp on the close-up shooting slider is about 73mm, with spirit level, Arca-Swiss / RRS standard fit; the slider is about 150mm long, bottom is designed with quick release plate structure of Arca-Swiss / RRS standard fit;
- The macro focusing rail slider compatible with Arca-Swiss / RRS / KIRK / WIMBERLEY / MARKINS / SUNWAYFOTO / KANGRINPOCHE / BENRO/SIRUI / MARSACE quick release plate and ballhead of Arca-Swiss / RRS standard fit; suitable for iShoot IS-JZ30 / IS-JZ50 / IS-JZ64 / IS-QJ58 / IS-QJ64 / IS-JZ60BK / IS-JZ70BK / IS-JZ80BK.
- See more on Amazon...
Brand: iShoot | Manufacturer: iShoot
Weight: 0.93 Pounds
See On Amazon #18
iShoot Metal Lens Collar Tripod Mount Ring Compatible with Canon RF 100-400mm f/5.6-8 is USM, Lens Support Holder Bracket Bottom is Arca-Swiss Fit Quick Release Plate Dovetail Groove
Asin: B09PV6L12W | Model: FBA-IS-EA5 | PartNumber: FBA-IS-EA5 | Ean: 0767159626061 | UPC: 767159626061
3. The Tripod Collar Bottom Is Added 50Mm Long Arca Fit Quick Release Plate Feature, Can Be Used With 39Mm Arca-Swiss Fit Tripod Ball Head, Panoramic Head And Clamp Directly; More Practical Than Lens Collars Without Qr-Plate..
5. The Lens Collar Is-Rf140 Can Be Combined With Clamp Mount Converter Is-3950Pro (Sold Separately), Which Can Be Used For Fluid Heads With Manfrotto Structure..
4. The Lens Support Bottom Reserved 1/4" And 3/8" Screw Holes And Stainless-Steel Anti-Slip Screws For Fixing Lens To Tripod Directly..
2. The Contact Surface Between The Inner Wall Of The Tripod Ring And The Lens Is Plastic Composite Film, Will Not Wear Lens Surface When Installed Correctly; There Should Be No Stickers On The Lens Surface Installation Position, If There Is, Remove It, Otherwise It Will Affect The Normal Installation; Hollow-Out Weight Reduction Design, Net Weight Is About 160G;.
Features
- 1. The lens collar is tailor-made based on the shape and structure of the lens, only compatible with Canon RF 100-400mm f/5.6-8 IS USM Lens, cannot be used with other lens; the inner wall of the tripod ring has a concave-convex irregular structure, and the switch hole is reserved, which does not affect the use of the switch on the lens; the tripod ring cannot be rotated, only support horizontal shooting;
- 2. The contact surface between the inner wall of the tripod ring and the lens is plastic composite film, will not wear lens surface when installed correctly; there should be no stickers on the lens surface installation position, if there is, remove it, otherwise it will affect the normal installation; hollow-out weight reduction design, net weight is about 160g;
- 3. The tripod collar bottom is added 50mm long Arca fit quick release plate feature, can be used with 39mm Arca-swiss fit tripod ball head, panoramic head and clamp directly; more practical than lens collars without QR-Plate.
- 4. The Lens support bottom reserved 1/4 and 3/8 screw holes and stainless-steel anti-slip screws for fixing lens to tripod directly.
- 5. The lens collar IS-RF140 can be combined with clamp mount converter IS-3950PRO (Sold Separately), which can be used for fluid heads with Manfrotto structure.
- See more on Amazon...
Brand: iShoot | Manufacturer: iShoot
See On Amazon #19
iShoot Foldable Long Focus Lens Support, Portable Telephoto Lens Bracket, Zoom Lens Stand, 2-in1 Camera Quick Release Plate Compatible with Manfrotto 200PL & Arca-Swiss Fit Tripod Ball Head Clamp
Asin: B09KFX9ZRX | Model: FBA-IS-TB03 | PartNumber: FBA-IS-TB03 | Ean: 0767159626009 | UPC: 767159626009
3. The Long-Focus Lens Support Can Be Used With Some Ball Heads And 2D Heads Of Arca-Swiss & Rrs Fit, Compatible With Manfrotto 308Rc / 352Rc, 322Rc2 / 324Rc2 / 327Rc2, 468Rc2 / 486Rc2 / 488Rc2 / 490Rc2 / 494Rc2 / 496Rc2 / 498Rc2, Mh490bh / Mh494bh / Mh496bh, Mhxproq2, Mh054m0-Q2 As Well; It Cannot Be Used With 3D Tripod Head Or Hydraulic Head;.
5. Compatible With Canon Lens: Rf 70-200Mm F/2.8L Is Usm; 100Mm F/2.8L Macro Is Usm; 100-500Mm F/4.5-7.1L Is Usm; Ef 70-200Mm F/2.8L Is Usm Series; 70-200Mm F/4L Is Usm Series; 80-200Mm F/2.8L; 100Mm F/2.8L Is Usm Macro; 180Mm F/3.5L Usm Macro; 200Mm F/2L Is Usm; 200Mm F/2.8Lii Usm; 300Mm F/4L Is Usm; 100-400M F/4-5.6L Is Usm Series; Ef 400Mm F/5.6L Is Usm..
4. The Redesigned Long-Focus Lens Support Is-Tb03 Has A Net Weight Of About 215G And A Fully Stretched Length Of About 19.5Cm. The Distance Between The Screw Holes At Both Ends Is About 17Cm. After Being Folded, It Is About 8.5Cm Long, 9Cm Wide And 4Cm High; Multi-Point Rubber Pads Are Used On The Contact Surface; It Adopts Three Movable Joints; Only The Second Joint Can Be Locked;.
2. The Quick Release Plate Of The Telephoto Lens Bracket Adopts 2-In-1 Design, Compatible With Arca-Swiss / Rrs Fit Tripod Head Clamp, And Compatible With Manfrotto 200Pl Structure As Well;.
Features
- 1. The minimum installation distance from the camera bottom plate to the lens collar bottom plate is about 5cm, suitable for various lens collars; the long-focus lens support can protect the bayonet of the lens after being installed between the camera and the lens;
- 2. The quick release plate of the telephoto lens bracket adopts 2-in-1 design, compatible with ARCA-SWISS / RRS fit tripod head clamp, and compatible with Manfrotto 200PL structure as well;
- 3. The long-focus lens support can be used with some ball heads and 2D heads of ARCA-SWISS & RRS fit, compatible with Manfrotto 308RC / 352RC, 322RC2 / 324RC2 / 327RC2, 468RC2 / 486RC2 / 488RC2 / 490RC2 / 494RC2 / 496RC2 / 498RC2, MH490BH / MH494BH / MH496BH, MHXPROQ2, MH054M0-Q2 as well; it cannot be used with 3D tripod head or hydraulic head;
- 4. The redesigned long-focus lens support IS-TB03 has a net weight of about 215g and a fully stretched length of about 19.5cm. The distance between the screw holes at both ends is about 17cm. After being folded, it is about 8.5cm long, 9cm wide and 4cm high; multi-point rubber pads are used on the contact surface; it adopts three movable joints; Only the second joint can be locked;
- 5. Compatible with Canon Lens: RF 70-200mm f/2.8L IS USM; 100mm f/2.8L Macro IS USM; 100-500mm f/4.5-7.1L IS USM; EF 70-200mm f/2.8L IS USM series; 70-200mm f/4L IS USM series; 80-200mm f/2.8L; 100mm f/2.8L IS USM MACRO; 180mm f/3.5L USM MACRO; 200mm f/2L IS USM; 200mm f/2.8LII USM; 300mm f/4L IS USM; 100-400m f/4-5.6L IS USM series; EF 400mm f/5.6L IS USM.
- See more on Amazon...
Brand: iShoot | Manufacturer: iShoot
Weight: 0.47 Pounds
See On Amazon #20
Metal Tripod Mount Ring , iShoot AII (W) Lens Collar Support for Canon EF 70-200mm f/4L USM EF 400mm f/5.6 L USM EF 80-200/2.8L
Asin: B0789M5S7Z | Model: 937284 | PartNumber: 937284 | Ean: 7168809047046
3. Net Weight Of This Tripod Mount Ring Is About 135G, Inner-Diameter About 78Mm, Width 18Mm, With Quick Release Plate On The Bottom. The Quick Release Plate Is 65Mm Long, And Reserves 1/4 And 3/8 Screw Holes..
5. Compatible With Canon Lenses: Ef 70-200Mm F/4L Usm, Ef 70-200Mm F/4L Is Usm, Ef 70-200Mm F/4L Is Ii Usm, Ef 400Mm F/5.6L Usm, Ef 80-200Mm F/2.8L.
4. The Quick Release Plate Adopts The As Standard And Is Compatible With The Standard Tripod Head Such As Rrs/Arca—Swiss / Kirk / Wimberley/Markins/Sunwayfoto/Kangrinpoche/Benro/Sirui/Marsace/Ishoot, And Also Suitable For Is-Jz30/Is-Jz50/Is-Jz64/ Is-Qj58/ Is-Qj64/ Is-Qj64-Fd/ Is-Jz60bk/ Is-Jz70mft/Is-Jz80bk, Etc..
2. Made Of Aviation Aluminum Materials, Cnc Precision Machining, Anodized Surface, Integrated Structure, Built-In Non-Slip Patch, Copper Knob And Stainless Steel Anti-Skid Nails, Which Is A Perfect Replacement For The Original Aii (W) Tripod Mount Ring..
Features
- 1. Based on Canon original tripod mount ring design, optimized its details and added the function of quick release plate to make it more practical than the original one.
- 2. Made of aviation aluminum materials, CNC precision machining, anodized surface, integrated structure, built-in non-slip patch, copper knob and stainless steel anti-skid nails, which is a perfect replacement for the original AII (W) tripod mount ring.
- 3. Net weight of this tripod mount ring is about 135g, inner-diameter about 78mm, width 18mm, with quick release plate on the bottom. The quick release plate is 65mm long, and reserves 1/4 and 3/8 screw holes.
- 4. The quick release plate adopts the AS standard and is compatible with the standard tripod head such as RRS/ARCA SWISS / KIRK / WIMBERLEY/MARKINS/SUNWAYFOTO/KANGRINPOCHE/BENRO/SIRUI/MARSACE/ISHOOT, and also suitable for IS-JZ30/IS-JZ50/IS-JZ64/ IS-QJ58/ IS-QJ64/ IS-QJ64-FD/ IS-JZ60BK/ IS-JZ70MFT/IS-JZ80BK, etc.
- 5. Compatible with Canon Lenses: EF 70-200mm f/4L USM, EF 70-200mm f/4L IS USM, EF 70-200mm f/4L IS II USM, EF 400mm f/5.6L USM, EF 80-200mm f/2.8L
- See more on Amazon...
Brand: iShoot | Manufacturer: ishoot
Weight: 0.30 Pounds
See On Amazon #21
iShoot Improved Lens Collar Tripod Mount Ring for Nikon RT-1 Nikkor AF-S 300mm F/4E PF ED VR & AF-S 70-200mm F/4G ED VR, Bottom Quick Release Plate Feature Compatible with Arca-Swiss 39mm Fit Ballhead
Asin: B07XQ5KX59 | Model: ZP07-IS-RT1 | PartNumber: ZP07-IS-RT1 | Ean: 0727161967903, 0727161968245 | UPC: 727161968245, 727161967903
Referencing To And Modified From Nikon Original Standard Design, Structure Is Enhanced, Details Are Improved, And Add The Function Of Quick Release Plate, More Practical;.
Quick Release Plate Is As 39Mm Standard, Compatible With Rrs / Arca-Swiss / Kirk / Wimberley / Markins / Sunwayfoto / Kangrinpoche / Benro / Sirui/Marsace / Ishoot Ball Head Of Arca 39Mm Fit, Suitable For Ishoot Is-Jz30 / Is-Jz50 / Is-Jz64 / Is-Qj58 / Is-Qj64 / Is-Jz60bk / Is-Jz70mft / Is-Jz80bk..
The Inner Diameter Of Tripod Mount Ring Is About 68Mm, Using Embedded Flocking To Increase Resistance; With Three Marks, Convenient For Lens Rotation And Alignment; Fast Spring Lock, Convenient For Quick Assembly And Disassembly Or Adjust The Composition Of Camera Body; Removable Quick Release Plate, Reserved 1/4" And 3/8 " Screw Holes;.
The Lens Collar Is Made Of Aviation Aluminum, Cnc Precision Machining, Surface Anodized, Light Weight Hollow Out Design, With Stainless Steel Screw. Net Weight Is About 160G;.
Features
- The lens support is tailor-made for Nikon AF-S NIKKOR 300mm f/4E PF ED VR Lens and Nikon AF-S NIKKOR 70-200mm f/4G ED VR Lens;
- The lens collar is made of aviation aluminum, CNC precision machining, surface anodized, light weight hollow out design, with stainless steel screw. Net weight is about 160g;
- Referencing to and modified from Nikon original standard design, structure is enhanced, details are improved, and add the function of quick release plate, more practical;
- The inner diameter of tripod mount ring is about 68mm, using embedded flocking to increase resistance; with three marks, convenient for lens rotation and alignment; fast spring lock, convenient for quick assembly and disassembly or adjust the composition of camera body; removable quick release plate, reserved 1/4 and 3/8 screw holes;
- Quick release plate is AS 39mm standard, compatible with RRS / ARCA-SWISS / KIRK / WIMBERLEY / MARKINS / SUNWAYFOTO / KANGRINPOCHE / BENRO / SIRUI/MARSACE / ISHOOT ball head of Arca 39mm fit, suitable for iShoot IS-JZ30 / IS-JZ50 / IS-JZ64 / IS-QJ58 / IS-QJ64 / IS-JZ60BK / IS-JZ70MFT / IS-JZ80BK.
- See more on Amazon...
Brand: iShoot | Manufacturer: iShoot
Weight: 0.35 Pounds
See On Amazon #22
iShoot Lens Collar Tripod Mount Ring Compatible with Canon EF-EOS R Mount Converter Adapter Ring Basic Model, Lens Support Holder Bracket Bottom is 39mm Arca-Swiss Fit Quick Release Plate Dovetail
Asin: B08SC1R4JZ | Model: FBA-IS-EOS-R-PRO | PartNumber: FBA-IS-EOS-R-PRO | Ean: 0708214152019 | UPC: 708214152019
3. The Tripod Collar Bottom Is Added 55Mm Long Arca Fit Quick Release Plate Feature, Can Be Used With 39Mm Arca-Swiss Fit Tripod Ball Head, Panoramic Head And Clamp Directly; More Practical Than Lens Collars Without Qr-Plate. The Lens Support Bottom Reserved 1/4" And 3/8" Screw Holes And Stainless-Steel Anti-Slip Screws For Fixing Lens To Tripod Directly..
5. The Tripod Ring Is Made Of High-Density Aviation Aluminum, Precisely Machined By World-Class High-End Cnc Precisely Machined, Hollowed-Out Work Processed By Multi-Diamond Cutter Finely, Lightweight And Solid. Polished And Surface Anodized Finish. The Appearance And Exquisite Workmanship Are Much Better Than Similar Products Made By Mold..
4. This Lens Support Bottom's Dovetail Groove Is 39Mm Arca-Swiss Standard, Compatible With Rrs / Arca-Swiss / Pmg / Wimberley / Markins / Photoclam / Sunwayfoto / Benro / Sirui / Marsace / Ishoot Ball Head Of Arca 39Mm Fit, Suitable For Ishoot Is-Jz30 / Is-Jz50 / Is-Jz64 / Is-Qj58 / Is-Qj64-Fd / Is-Jz60bk / Is-Jz70mft / Is-Jz80bk..
2. The Tripod Collar Using Laser Scanning Technology To Accurately Obtain Lens Parameters, And Then Accurately Carve Out The Shape Of The Inner Diameter Of The Tripod Ring According To The Data. The Edges And Corners Are Polished, The Inner Wall Is Affixed With 3M Plastic Film, Preventing The Lens From Scratches; The Shortest Inner Diameter Of The Lens Holder Is About 73Mm, The Width Of This Contact Surface Is About 18Mm; Net Weight Is About 145G..
Features
- 1. The tripod mount ring is tailor-made for Canon EF-EOS R adapter ring, CAN only be used for EF-EOS R basic models, not for models with filters or focusing rings; relying on the switch and bayonet positioning, cannot rotate in the tripod ring; when shooting vertically, the EF-EOS R adapter ring needs to be taken out and reinstalled.
- 2. The tripod collar using laser scanning technology to accurately obtain lens parameters, and then accurately carve out the shape of the inner diameter of the tripod ring according to the data. The edges and corners are polished, the inner wall is affixed with 3M plastic film, preventing the lens from scratches; the shortest inner diameter of the lens holder is about 73mm, the width of this contact surface is about 18mm; net weight is about 145g.
- 3. The tripod collar bottom is added 55mm long Arca fit quick release plate feature, can be used with 39mm Arca-swiss fit tripod ball head, panoramic head and clamp directly; more practical than lens collars without QR-Plate. The Lens support bottom reserved 1/4 and 3/8 screw holes and stainless-steel anti-slip screws for fixing lens to tripod directly.
- 4. This lens support bottom's dovetail groove is 39mm Arca-Swiss standard, compatible with RRS / ARCA-SWISS / PMG / WIMBERLEY / MARKINS / PHOTOCLAM / SUNWAYFOTO / BENRO / SIRUI / MARSACE / ISHOOT ball head of Arca 39mm fit, suitable for iShoot IS-JZ30 / IS-JZ50 / IS-JZ64 / IS-QJ58 / IS-QJ64-FD / IS-JZ60BK / IS-JZ70MFT / IS-JZ80BK.
- 5. The tripod ring is made of high-density Aviation Aluminum, precisely machined by world-class high-end CNC precisely machined, hollowed-out work processed by Multi-Diamond Cutter finely, lightweight and solid. Polished and surface anodized finish. The appearance and exquisite workmanship are much better than similar products made by mold.
- See more on Amazon...
Brand: iShoot | Manufacturer: iShoot
Weight: 0.32 Pounds
See On Amazon #23
iShoot Tripod Head Mount Converter Quick Release Adapter for Cantilever Head, Fluid Head, Ballhead, Tripod Heads with Circular Bottom & 3/8 Screw Hole, Bottom is Arca-Swiss Fit Quick Release Plate
Asin: B08FM24XFD | Model: PH05-IS-STH58 | PartNumber: PH05-IS-STH58 | Ean: 0737838352413 | UPC: 737838352413
3. The Tripod Head Mount Converter Is Suitable For Cantilever Head, Fluid Head, Ball Head, And Other Tripod Heads With Circular Bottom And 3/8 Screw Hole, To Reach Quick Release And Quick Conversion Functions;.
5. The Tripod Head Mount Converter Is Made Of Aviation Aluminum, Cnc Precisely Machined, Hollow-Out Weight Reduction Design, Polished And Surface Anodized Finish. The Appearance And Exquisite Workmanship Are Much Better Than Similar Products Made By Mold..
4. This Bottom Quick Release Plate Of 39Mm Arca-Swiss Fit, Compatible With Rrs / Arca-Swiss / Pmg / Wimberley / Markins / Photoclam / Sunwayfoto / Benro / Sirui / Marsace / Ishoot Ball Head Of Arca 39Mm Fit, Suitable For Ishoot Is-Jz30 / Is-Jz50 / Is-Jz64 / Is-Qj58 / Is-Qj64-Fd / Is-Jz60bk / Is-Jz70mft / Is-Jz80bk;.
2. The Front Side Is Circular With Anti-Skid Rubber Embedded, Equipped With Stainless Steel Anti-Skid Screws, Can Be Installed To The Bottom Of Tripod Head Via 3/8 Stainless Steel Screw; The Reverse Side Adopts The Arca-Swiss / Rrs Standard Quick-Release Plate Structure, Suitable For 39Mm Arca-Swiss Fit Ball Head And Clamp;.
Features
- 1. The converter adopts a double-layer structure with a maximum diameter of about 58mm and a thickness of about 10mm, the net weight is about 55g;
- 2. The front side is circular with anti-skid rubber embedded, equipped with stainless steel anti-skid screws, can be installed to the bottom of tripod head via 3/8 Stainless steel screw; the reverse side adopts the ARCA-SWISS / RRS standard quick-release plate structure, suitable for 39mm Arca-Swiss fit ball head and clamp;
- 3. The tripod head mount converter is suitable for cantilever head, fluid head, ball head, and other tripod heads with circular bottom and 3/8 screw hole, to reach quick release and quick conversion functions;
- 4. This bottom Quick Release Plate of 39mm Arca-Swiss fit, compatible with RRS / ARCA-SWISS / PMG / WIMBERLEY / MARKINS / PHOTOCLAM / SUNWAYFOTO / BENRO / SIRUI / MARSACE / ISHOOT ball head of Arca 39mm fit, suitable for iShoot IS-JZ30 / IS-JZ50 / IS-JZ64 / IS-QJ58 / IS-QJ64-FD / IS-JZ60BK / IS-JZ70MFT / IS-JZ80BK;
- 5. The tripod head mount converter is made of Aviation Aluminum, CNC precisely machined, hollow-out weight reduction design, polished and surface anodized finish. The appearance and exquisite workmanship are much better than similar products made by mold.
- See more on Amazon...
Brand: iShoot | Manufacturer: iShoot
Weight: 0.12 Pounds
See On Amazon #24
iShoot Tripod Mount Ring, Lens Collar Support Compatible with Sigma 100-400mm f/5-6.3 DG OS HSM Contemporary Lens (EF/F Mount), Bottom is ARCA Quick Release Plate for ARCA-Swiss Fit Tripod Ball Head
Asin: B085M8QVGL | Ean: 0737838988728 | UPC: 737838988728
3. The Tripod Mount Ring Is Tailored To The Lens. Cannot Be Rotated, With 3M Film Inside, Inner Diameter Is About 84Mm, Width Is About 23Mm;.
5. Quick Release Plate Is As 39Mm Standard, Compatible With Rrs / Arca-Swiss / Kirk / Wimberley / Markins / Sunwayfoto / Kangrinpoche / Benro / Sirui / Marsace / Ishoot Tripod Ball Head Of Arca 39Mm Fit, For Ishoot Is-Jz30 / Is-Jz50 / Is-Jz64 / Is-Qj58 / Is-Qj64 / Is-Qj64-Fd / Is-Jz60bk / Is-Jz70mft / Is-Jz80bk Clamp..
4. Bottom Is Added Quick Release Plate Feature, Plate Length Is About 70Mm, With 1/4 And 3/8 Screw Holes And Stainless Steel Anti-Slip Screw, Net Weight Is About 160G;.
2. The Lens Collar Is Made Of Aviation Aluminum, Cnc Precisely Machined, Hollow-Out Weight Reduction Design, Surface Polished And Anodized, With Stainless Steel Screw;.
Features
- 1. The lens collar is tailor-made and only Compatible with Sigma 100-400mm f/5-6.3 DG OS HSM Contemporary Lens (EF and F Mount), Not Compatible with Sigma 100-400mm f/5-6.3 DG DN OS (E-mount and L-Mount) and other lenses
- 2. The lens collar is made of aviation aluminum, CNC precisely machined, hollow-out weight reduction design, surface polished and anodized, with stainless steel screw;
- 3. The tripod mount ring is tailored to the lens. Cannot be rotated, with 3M film inside, inner diameter is about 84mm, width is about 23mm;
- 4. Bottom is added quick release plate feature, plate length is about 70mm, with 1/4 and 3/8 screw holes and stainless steel anti-slip screw, net weight is about 160g;
- 5. Quick release plate is AS 39mm standard, compatible with RRS / ARCA-SWISS / KIRK / WIMBERLEY / MARKINS / SUNWAYFOTO / KANGRINPOCHE / BENRO / SIRUI / MARSACE / ISHOOT tripod ball head of Arca 39mm fit, for iShoot IS-JZ30 / IS-JZ50 / IS-JZ64 / IS-QJ58 / IS-QJ64 / IS-QJ64-FD / IS-JZ60BK / IS-JZ70MFT / IS-JZ80BK clamp.
- See more on Amazon...
Brand: iShoot | Manufacturer: iShoot
Weight: 0.35 Pounds
See On Amazon #25
Tripod Mount Ring,iShoot Lens Collar with Quick Release Plate for Sony E 10-18mm F4 OSS(SEL1018), FE 12-24mm F4 G(SEL1224G), Vario-Tessar T FE 16-35mm F4 ZA OSS(SEL1635Z),FE 16-35mm F2.8 GM(SEL1635GM)
Asin: B07WFFZ6WQ | Model: ZP01-IS-S24240FE | PartNumber: ZP01-IS-S24240FE | Ean: 0782429148074 | UPC: 782429148074
This Camera Lens Bracket Cannot Be Rotated. Tailor-Made According To The Lens. Positioning By The Switch And Bayonet. All Corners Are Grinding Rounded, Using 3M Plastic Film Inside To Prevent Lens Wear;.
Bottom Quick Release Plate Is As Standard, Compatible With Rrs / Arca-Swiss / Pmg / Wimberley / Markins / Photoclam / Sunwayfoto / Benro / Sirui / Marsace / Ishoot Tripod Ball Head Of Arca 39Mm Fit..
The Inner Diameter Of The Lens Support Is About 61.5Mm And The Width Is About 18Mm. Added The Function Of Quick Release Plate. The Length Of The Plate Is About 55Mm, With 1/4 And 3/8 Screw Holes And Stainless Steel Anti-Slip Screws;.
The Lens Collar Is Made Of Aviation Aluminum, Cnc Precisely Machined, Hollow-Out Weight Reduction Design, Polished And Surface Anodized, With Stainless Steel Screw;.
Features
- This iShoot tripod mount ring is tailor-made for Sony FE 12-24mm F4 G, FE 85mm F1.8 and so on; the net weight is about 155g;
- The lens collar is made of aviation aluminum, CNC precisely machined, hollow-out weight reduction design, polished and surface anodized, with stainless steel screw;
- This camera lens bracket cannot be rotated. Tailor-made according to the lens. Positioning by the switch and bayonet. All corners are grinding rounded, using 3M plastic film inside to prevent lens wear;
- The inner diameter of the lens support is about 61.5mm and the width is about 18mm. Added the function of quick release plate. The length of the plate is about 55mm, with 1/4 and 3/8 screw holes and stainless steel anti-slip screws;
- Bottom quick release plate is AS standard, compatible with RRS / ARCA-SWISS / PMG / WIMBERLEY / MARKINS / PHOTOCLAM / SUNWAYFOTO / BENRO / SIRUI / MARSACE / ISHOOT tripod ball head of Arca 39mm fit.
- See more on Amazon...
Brand: iShoot | Manufacturer: iShoot
See On Amazon #26
Tripod Mount Ring Lens Collar Support Bracket Compatible with Sigma 14-24mm F2.8 DG DN Art, 24-70mm F2.8 DG DN Art, 28-70mm F2.8 DG DN C, 85mm F1.4 DG DN Art, 105mm F2.8 DG DN Macro (E-Mount) Lens
Asin: B0CG9G54M1 | Model: PHCASM-IS-S24240FE | PartNumber: PHCASM-IS-S24240FE | Ean: 0717967924514 | UPC: 717967924514
3. When Installing, Loosen The Knob, Align The Convex Point Of The Lens With The Groove Of The Ring Body, Push Down Gently, And Lock It Moderately;.
5. The Tripod Ring Is Made Of Aviation Aluminum, Cnc Precisely Machined, Hollow-Out Weight Reduction Design, Polished And Surface Anodized Finish. The Appearance And Exquisite Workmanship Are Much Better Than Similar Products Made By Mold..
4. The Tripod Collar Bottom Is Added 55Mm Long Arca Fit Quick Release Plate Feature, Can Be Used With 39Mm Arca-Swiss Fit Tripod Head And Clamp Directly, More Practical Than Lens Collars Without Qr-Plate; Also Reserved 1/4" And 3/8" Screw Holes And Stainless-Steel Anti-Slip Screws For Fixing Lens To Tripod Directly；.
2. The Contact Surface Between The Inner Wall Of The Tripod Ring And The Lens Is Pvc Film To Reduce Wear;.
Features
- 1. The lens collar is made according to the shape and structure design of the lens, installed near the mount;
- 2. The contact surface between the inner wall of the tripod ring and the lens is PVC film to reduce wear;
- 3. When installing, loosen the knob, align the convex point of the lens with the groove of the ring body, push down gently, and lock it moderately;
- 4. The tripod collar bottom is added 55mm long Arca fit quick release plate feature, can be used with 39mm Arca-Swiss fit tripod head and clamp directly, more practical than lens collars without QR-Plate; also reserved 1/4 and 3/8 screw holes and stainless-steel anti-slip screws for fixing lens to tripod directly
- 5. The tripod ring is made of Aviation Aluminum, CNC precisely machined, hollow-out weight reduction design, polished and surface anodized finish. The appearance and exquisite workmanship are much better than similar products made by mold.
- See more on Amazon...
Brand: iShoot | Manufacturer: iShoot
See On Amazon #27
iShoot Lens Collar Support Compatible with Sony FE PZ 28-135mm f/4 G OSS SELP28135G, CNC Machined Lens Tripod Mount Ring, Bottom is ARCA Fit Quick Release Plate for ARCA-Swiss Type Tripod Ball Head
Asin: B0836TZ668 | Model: IS-S28135FE | PartNumber: IS-S28135FE | Ean: 0708214154204 | UPC: 708214154204
The Tripod Mount Ring Is Referencing To And Modified From Sony Original Standard Design. Split Structure, Added Strap Buckle And Quick Release Plate Function; With 3M Film Inside The Tripod Ring For Protecting The Lens From Scratches; Inner Diameter Is About 74.5Mm, Width Is About 17Mm;.
Quick Release Plate Is As 39Mm Standard, Compatible With Compatible With Rrs / Arca-Swiss / Pmg / Wimberley / Markins / Sunwayfoto / Benro / Sirui / Marsace / Ishoot Tripod Ball Head Of Arca 39Mm Fit, Suitable For Ishoot Is-Jz30 / Is-Jz50 / Is-Jz64 / Is-Qj58 / Is-Qj64 / Is-Qj64-Fd / Is-Jz60bk / Is-Jz70mft / Is-Jz80bk / Is-Jz85mft Clamp..
The Bottom Of The Lens Bracket Is Quick Release Plate Feature, And The Length Is About 90Mm, With 1/4” And 3/8” Screw Holes And Stainless Steel Anti-Slip Screw;.
The Lens Collar Is Made Of High Quality Aviation Aluminum, Lightweight And Solid; Precisely Machined By World-Class High-End Cnc Turning Center, Surface Anodic Oxidation; Appearance And Exquisite Workmanship Is Much Better Than Similar Products Made By Mold;.
Features
- The lens support is tailor-made for Sony SELP28135G FE PZ 28-135mm f/4 G OSS Lens; hollow-out weight reduction design, with stainless steel screw, net weight is about 205g;
- The lens collar is made of high quality Aviation Aluminum, lightweight and solid; precisely machined by world-class high-end CNC turning center, surface anodic oxidation; appearance and exquisite workmanship is much better than similar products made by mold;
- The tripod mount ring is referencing to and modified from Sony original standard design. Split structure, added strap buckle and quick release plate function; with 3M film inside the tripod ring for protecting the lens from scratches; inner diameter is about 74.5mm, width is about 17mm;
- The bottom of the lens bracket is quick release plate feature, and the length is about 90mm, with 1/4 and 3/8 screw holes and stainless steel anti-slip screw;
- Quick release plate is AS 39mm standard, compatible with compatible with RRS / ARCA-SWISS / PMG / WIMBERLEY / MARKINS / SUNWAYFOTO / BENRO / SIRUI / MARSACE / ISHOOT tripod ball head of Arca 39mm fit, suitable for iShoot IS-JZ30 / IS-JZ50 / IS-JZ64 / IS-QJ58 / IS-QJ64 / IS-QJ64-FD / IS-JZ60BK / IS-JZ70MFT / IS-JZ80BK / IS-JZ85MFT clamp.
- See more on Amazon...
Brand: iShoot | Manufacturer: iShoot
See On Amazon #28
iShoot Lens Collar Tripod Mount Ring Compatible with Nikon Nikkor Z 24-120mm f/4 S Lens, Lens Support Holder Bracket Bottom is Arca-Swiss Fit Quick Release Plate Dovetail Groove
Asin: B0CJYFFTD4 | Ean: 0717967924576 | UPC: 717967924576
3. When Installing, Loosen The Knob, Align The Installation Position, Push Down Gently, And Lock It Moderately; After Installation, Do Not Disassemble Frequently, Which Will Easily Cause Wear;.
5. The Tripod Collar Bottom Is Added 50Mm Long 39Mm Arca Fit Quick Release Plate Feature, Can Be Used With 39Mm Arca-Swiss Fit Tripod Ball Head, Panoramic Head And Clamp Directly; More Practical Than Lens Collars Without Qr-Plate; Also Reserved 1/4" And 3/8" Screw Holes And Stainless-Steel Anti-Slip Screws For Fixing Lens To Tripod Directly；.
4. The Tripod Ring Supports Vertical Shooting. When Vertical Shooting Is Required, Please Withdraw From The Lens, Adjust The Angle And Reinstall It. It Cannot Be Rotated Directly On The Lens Surface;.
2. The Contact Surface Between The Inner Wall Of The Tripod Ring And The Lens Is Made Of Pvc Film; There Should Be No Stickers At The Installation Position, If There Is, It Should Be Removed, Otherwise It Will Affect The Installation;.
Features
- 1. The lens collar is tailor-made according to the shape and structure of the lens, there are grooves on the inner wall of the tripod ring, corresponding to the raised switches on the surface of the lens, only compatible with Nikon Nikkor Z 24-120mm F4 S Lens, Can not be used for other lenses;
- 2. The contact surface between the inner wall of the tripod ring and the lens is made of PVC film; there should be no stickers at the installation position, if there is, it should be removed, otherwise it will affect the installation;
- 3. When installing, loosen the knob, align the installation position, push down gently, and lock it moderately; after installation, do not disassemble frequently, which will easily cause wear;
- 4. the tripod ring supports vertical shooting. When vertical shooting is required, please withdraw from the lens, adjust the angle and reinstall it. It cannot be rotated directly on the lens surface;
- 5. The tripod collar bottom is added 50mm long 39mm Arca fit quick release plate feature, can be used with 39mm Arca-swiss fit tripod ball head, panoramic head and clamp directly; more practical than lens collars without QR-Plate; also reserved 1/4 and 3/8 screw holes and stainless-steel anti-slip screws for fixing lens to tripod directly
- See more on Amazon...
Brand: iShoot | Manufacturer: iShoot
See On Amazon #29
Hot Shoe Mount Flash Bracket/Photo Umbrella Holder Support for Canon Nikon Pentax Olympus Metz Speedlite Flash&Trigger
Asin: B00SYD0JRY | Model: IS-GII | PartNumber: IS-GII | Ean: 5060209039015
Umbrella Hole Diameter About 10Mm, Knob Made Of Abs Material, Wheel Gear Design,Support For Most Of Studio Umbrellas.
Package Includes: 1 X Mini Flash Bracket Is-Gii With Metal Hot Shoe Mount(The Other Items In The Photos Not Listed Here Are For Illustrating Only, Not Included).
Bottom Hole Diameter About 15.8Mm, Support For Most Of Studio Light Stands.
Iso518 Copper Hot Shoe Mount Design, With Locking Hole.
Features
- Portable, about 9x4x3cm (H x W x D); light weight, about 80g
- ISO518 copper hot shoe mount design, with locking hole
- Umbrella hole diameter about 10mm, knob made of ABS material, wheel gear design,support for most of studio umbrellas
- Bottom hole diameter about 15.8mm, support for most of studio light stands
- Package Includes: 1 x Mini Flash Bracket IS-GII with Metal Hot Shoe Mount(The other items in the photos not listed here are for illustrating only, not included)
- See more on Amazon...
Brand: iShoot | Manufacturer: Photoloving Photography Equipment Co.,Ltd.
See On Amazon #30
iShoot Lens Collar Tripod Mount Ring Compatible with Tamron 70-300 f/4.5-6.3 Di RXD III A047 Z Mount, Support Holder Bracket Arca Fit Quick Release Plate Dovetail for Arca-Swiss Type Clamp Stabilizer
Asin: B0BQBZ71MQ | Model: FBA-IS-TA730Z | PartNumber: FBA-IS-TA730Z | Ean: 0717967413384 | UPC: 717967413384
3. The Quick Release Plate’S Bottom Is Improved With New Design, Which Is Compatible With The Handheld Stabilizer With The Same Structure; Also Reserved 1/4" And 3/8" Screw Holes And Stainless-Steel Anti-Slip Screws For Fixing Lens To Tripod Directly；.
5. When Installing, Loosen The Knob, Align The Installation Position, And Gently Push To Lock It; Please Do Not Use Excessive Force. The Tripod Ring Can Only Support Horizontal Shooting, Not Support Vertical Shooting..
4. The Tripod Ring Is Tightly Combined With The Lens, And There Should Be No Stickers At The Installation Position. If There Is, It Should Be Removed, Otherwise It Will Affect The Installation. The Inner Wall Of The Tripod Ring And The Contact Surface Of The Lens Are Partly Made Of Pvc Film;.
2. The Tripod Collar Bottom Is Added 50Mm Long Arca Fit Quick Release Plate Feature, Can Be Used With 39Mm Arca-Swiss Fit Tripod Head And Clamp Directly, More Practical Than Lens Collars Without Qr-Plate;.
Features
- 1. The tripod mount ring is tailor-made according to the shape and structure of the lens. A USB upgrade hole is reserved. The inner wall of the tripod ring has a concave-convex irregular structure, only compatible with Tamron 70-300 f/4.5-6.3 Di RXD III A047 Z-Mount lens, not compatible with Sony E mount or other lenses;
- 2. The tripod collar bottom is added 50mm long Arca fit quick release plate feature, can be used with 39mm Arca-swiss fit tripod head and clamp directly, more practical than lens collars without QR-Plate;
- 3. The quick release plate s bottom is improved with new design, which is compatible with the handheld stabilizer with the same structure; also reserved 1/4 and 3/8 screw holes and stainless-steel anti-slip screws for fixing lens to tripod directly
- 4. The tripod ring is tightly combined with the lens, and there should be no stickers at the installation position. If there is, it should be removed, otherwise it will affect the installation. The inner wall of the tripod ring and the contact surface of the lens are partly made of PVC film;
- 5. When installing, loosen the knob, align the installation position, and gently push to lock it; please do not use excessive force. The tripod ring can only support horizontal shooting, not support vertical shooting.
- See more on Amazon...
Brand: iShoot | Manufacturer: iShoot
See On Amazon