JT-HLM - Buying Guide
Last Updated: 05/11/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
JT-HLM 90 Degree 5/8'' Nylon Thru Hull Connector,Black Deck Drain with Stainless Steel Trim Cover, Hose Pipe Elbow Bilge Pump Drain Thru Hull Fitting
Asin: B0C16WSK5F
✔Widely Applications:Boats Yachts Caravans Trucks Autocaravans Tractor And Many More ... Kitchen Or Grill Area..
✔Risk-Free Purchase! If You Have Any Issues ，Please Feel Free To Contact Us..
✔Suitable For Size：Hose 5/8 Inch(15Mm).（See The Picture For The Specific Size）.
✔Easy Installation:Easy And Quick For Installation, Designed For Easier Applications Where Hose Is Difficult To Route.(Not Recommended For Use Below The Waterline).
Features
- HIGH QUALITY MATERIAL:Made of durable polypropylene to withstand the rigors of marine environments,highly mirror polished 316 Stainless-steel flange offers excellent corrosion resistance,Ideal for use as an exhaust port for a bilge pump.
- EASY INSTALLATION:Easy and quick for installation, designed for easier applications where hose is difficult to route.(Not recommended for use below the waterline)
- WIDELY APPLICATIONS:Boats Yachts Caravans trucks Autocaravans Tractor And many more ... kitchen or grill area.
- SUITABLE FOR SIZE Hose 5/8 inch(15mm). See the picture for the specific size
- RISK-FREE purchase! If you have any issues please feel free to contact us.
- See more on Amazon...
Brand: JT-HLM | Manufacturer: JT-HLM
Warranty: 1 Yeat
See On Amazon #2
JT-HLM 2 PCS Marine Grade Boat Door Hatch Anti-Rattle Latches 316 Stainless Steel Lockable Hold Down Clamp Latches
Asin: B0C149P78R
✔Suitable For Size:Anti-Rattle Latch Width:1-1/8" (28 Mm) ; Length: 3.6 Inch / 90 Mm (When Latch Is In The Closed Position)The Detail Size Refer To The Left Picture..
✔Anti-Rattle Design: Eliminates Noise And Vibration During Use, Ensuring A Quiet And Comfortable Environment. The Latch Features A Center Tensioning Cam And An Eyelet For A Padlock, Providing A Secure Locking Mechanism To Keep Your Belongings Safe And Secure..
✔Widely Used:Boat Lockable Hold Down Clamp Latch Used For Marine,Boat,Hatch Cover,Door,Yacht,Locker,Etc..
✔Easy To Install:Simple Installation, No Drilling Or Welding Required. Direct Replacement For The Old Or Broken One..
Features
- HIGH QUALITY MATERIAL:Marine grade 316 stainless steel: Latches are made of marine-grade 316 stainless steel, corrosion-resistant, rust-resistant, heavy-duty, sturdy, and durable.
- EASY TO INSTALL:Simple installation, no drilling or welding required. Direct replacement for the old or broken one.
- SUITABLE FOR SIZE:Anti-rattle latch width:1-1/8 (28 mm) ; Length: 3.6 inch / 90 mm (When latch is in the closed position)the detail size refer to the left picture.
- WIDELY USED:Boat lockable hold down clamp latch used for marine,boat,hatch cover,door,yacht,locker,etc.
- ANTI-RATTLE DESIGN: Eliminates noise and vibration during use, ensuring a quiet and comfortable environment. The latch features a center tensioning cam and an eyelet for a padlock, providing a secure locking mechanism to keep your belongings safe and secure.
- See more on Amazon...
Brand: JT-HLM | Manufacturer: JT-HLM
Warranty: 1 Year
See On Amazon #3
JT-HLM Boat Stainless Steel Anchor Chain Lock 10-12mm Anchor Chain Stopper Rope Mooring Device
Asin: B0B3XKGY8M
✔Size:Anchor Chain Lock Is Suitable For 10-12Mm/0.39-0.47In Rope Or Chain,The Length Is 6.41"/163Mm.(Refer To The Size Chart For Specific Dimensions).
✔Risk-Free Purchase! If You Have Any Issues ，Please Feel Free To Contact Us..
✔Portable :Easy To Install Light And Portable, Does Not Take Up Space, Can Be Placed Anywhere,No Additional Adjustments..
✔Design Features: Advanced Lock Ring Design.Excellent For Anchor Rodes And Leads Chain Helps Protect Your Anchor Line From Bottom Damage..
Features
- HIGH QUALITY MATERIAL:Made of 316 stainless steel high hardness, strong impact resistance, maximum corrosion resistance and durability in the saltwater environment.
- DESIGN FEATURES: Advanced Lock Ring Design.Excellent for anchor rodes and leads chain helps protect your anchor line from bottom damage.
- SIZE:Anchor Chain Lock is suitable for 10-12mm/0.39-0.47in rope or chain,the length is 6.41/163mm.(Refer to the size chart for specific dimensions)
- PORTABLE :Easy to install light and portable, does not take up space, can be placed anywhere,no additional adjustments.
- RISK-FREE purchase! If you have any issues please feel free to contact us.
- See more on Amazon...
Brand: JT-HLM | Manufacturer: JT-HLM
See On Amazon #4
JT-HLM Stainless Steel 6mm Marine Anchor Assist Retrieval Device System Ring with Carabiner and Tether for Boats Yachts Ships
Asin: B0CG1JHLL2
✔Dimensions: Wire Dia.: 6Mm; Ring O.D.: 140Mm;Small Ring I.D.: 28Mm;Opening Size: 25Mm.Rope：45Cm/1.8Ft 0.24Inches Thick.
✔Simple Retrieve:Throw The Ring Around Your Anchor Line, Put The Loop On A Polyform Buoy. Run Forward And Lift Your Anchor, Then Easily Haul It In..
✔Easy To Use Anchor Retrieval System - Anchor Your Boat As Normal. When Ready To Raise Your Anchor Clip The Anchor Ring To Your Anchor Line And Throw The Buoy Into The Water. Motor Forward Around Your Anchor Line To Break Your Anchor Free. Continue To Motor Forward Until The Anchor Reaches The Surface..
✔Design Feature:The Anchor Ring Will Assist In Raising Your Anchor From The Seabed Using The Buoyancy Of A Buoy (Not Supplied) To Lift The Anchor To The Surface Making It Easy To Retrieve With Minimal Hard Lifting..
Features
- HIGH QUALITY MATERIAL:Made of solid Stainless Steel for durability and resistance to rust and corrosion.
- DESIGN FEATURE:The Anchor Ring will assist in raising your anchor from the seabed using the buoyancy of a buoy (not supplied) to lift the anchor to the surface making it easy to retrieve with minimal hard lifting.
- DIMENSIONS: Wire Dia.: 6mm; Ring O.D.: 140mm;Small ring I.D.: 28mm;Opening size: 25mm.Rope 45cm/1.8ft 0.24inches thick
- EASY TO USE ANCHOR RETRIEVAL SYSTEM - Anchor your boat as normal. When ready to raise your anchor clip the Anchor Ring to your anchor line and throw the buoy into the water. Motor forward around your anchor line to break your anchor free. Continue to motor forward until the anchor reaches the surface.
- SIMPLE RETRIEVE:Throw the ring around your anchor line, put the loop on a Polyform buoy. Run forward and lift your anchor, then easily haul it in.
- See more on Amazon...
Brand: JT-HLM | Manufacturer: JT-HLM
See On Amazon #5
JT-HLM 6 inch Boat Hatch 316 Stainless Steel Round Non Slip 2 Eyes Inspection Hatch Deck Plate with Detachable Cover
Asin: B0C13F6R4T
▲Good Waterproof:6 Inch Inside Diameter Port Hole With The O-Ring Seal Around Cover Keeps Water Out(Need To Install With 5Mm Screws)..
▲Risk-Free Purchase! If You Have Any Issues ,Please Feel Free To Contact Us..
▲Size:Inner Dia.=6"; Cut-Out Size: 160Mm/6.9"; Diameter Of Inner Plate: 150Mm / 6"; Diameter Of Outer Ring: 200Mm / 8"（Dimensions Can Refer To The Left Figure）.
▲Easy To Install:Simple Installation, No Drilling Or Welding Required. Direct Replacement For The Old Or Broken One..
Features
- HIGH QUALITY MATERIAL:Made of 316 stainless steel, this deck plate wil retain an attractive, clean finish with low maintenance for the discriminating yachtsman, outside of a long service life.Heavy duty lid with non-slip, mirrow polished surface.
- EASY TO INSTALL:Simple installation, no drilling or welding required. Direct replacement for the old or broken one.
- GOOD WATERPROOF:6 Inch inside diameter port hole with the O-ring seal around cover keeps water out(Need to install with 5mm screws).
- SIZE:Inner Dia.=6; Cut-out size: 160mm/6.9; Diameter of inner plate: 150mm / 6; Diameter of outer ring: 200mm / 8 Dimensions can refer to the left figure
- RISK-FREE purchase! If you have any issues ,please feel free to contact us.
- See more on Amazon...
Brand: JT-HLM | Manufacturer: JT-HLM
Warranty: 1 Year
See On Amazon #6
JT-HLM 6 inch Boat Deck Plate Hatch White Nylon Round Non Slip Inspection Hatch with Detachable Clear Cover
Asin: B0C13Y4XV7
✔Automatic Pop-Up:The Ship Deck Access Hatch Is Easy To Open, Just Open 90 Degrees To The Left, The Specially Designed Thread Pops Up Automatically, Suitable For All Kinds Of Boats/Yachts, Very Suitable For Indoor And Outdoor Applications..
✔Good Waterproof:The O-Ring Seal Around Cover Keeps Water Out.The O-Ring Is Secured Under The Cap, Eliminating The Problem Of The O-Ring Falling Out When It Was Placed On The Base(Need To Install With 6Mm Screws)..
✔Suitable For Size:Inside Diameter: 6" (150Mm), Outside Diameter: 8" (200Mm)（Please Refer To The Dimensional Drawing For Details）.
✔Easy To Install:The Ship Deck Access Port Has An Independent Cover And Chassis, With A Surface That Can Be Installed Horizontally And Vertically. The Transparent Cover Is Easy To Remove And Allows Direct Observation Of The Internal Conditions..
Features
- HIGH QUALITY MATERIAL:Deck plate hatch with clear lid is made of ABS Plastic, which is anti-aging and used to increase the resistance to sunlight, water and salt.
- EASY TO INSTALL:The ship deck access port has an independent cover and chassis, with a surface that can be installed horizontally and vertically. The transparent cover is easy to remove and allows direct observation of the internal conditions.
- AUTOMATIC POP-UP:The ship deck access hatch is easy to open, just open 90 degrees to the left, the specially designed thread pops up automatically, suitable for all kinds of boats/yachts, very suitable for indoor and outdoor applications.
- SUITABLE FOR SIZE:Inside Diameter: 6 (150mm), Outside Diameter: 8 (200mm) Please refer to the dimensional drawing for details
- GOOD WATERPROOF:The O-ring seal around cover keeps water out.The O-Ring is secured under the cap, eliminating the problem of the O-Ring falling out when it was placed on the base(Need to install with 6mm screws).
- See more on Amazon...
Brand: JT-HLM | Manufacturer: JT-HLM
Warranty: 1 Year
See On Amazon #7
JT-HLM Stainless Steel Double Ring Drink Holder Open Design Cup Holder with Screws for Marine Yacht Truck RV
Asin: B0B41CWR5Z | Model: cup holder | PartNumber: cup holder
✔Dimensions:Cup Holder 8-1/4"(210Mm) Overall Length;Ring: 3.58"(91Mm) Inner Diameter,2.83"(72Mm) Height.(Refer To The Size Chart For Specific Dimensions).
✔Risk-Free Purchase! If You Have Any Issues ，Please Feel Free To Contact Us..
✔Widely Used :You Can Use It In Various Environments . Widely Use On Boat, Game Table, Sofa, Cars And So On.A Boat Beverage Holder With A Double-Opening Ring Design For Universal Cups, Cans, Beer And Mugs..
✔Design Feature:Open Ring Design,Convenience For The Cups Put In And Take It Out.Sturdy Flanged Base For Nicer Fit And Added Strength.Easy To Install, Through Screw Bolt..
Features
- CUP HOLDER MATERIAL:Made of marine grade stainless steel,maximum corrosion resistance and durability in the saltwater environment,for Longer service life.
- DESIGN FEATURE:Open ring design,convenience for the cups put in and take it out.Sturdy flanged base for nicer fit and added strength.Easy to install, through screw bolt.
- DIMENSIONS:Cup holder 8-1/4(210mm) overall length;Ring: 3.58(91mm) inner diameter,2.83(72mm) height.(Refer to the size chart for specific dimensions)
- WIDELY USED :You can use it in various environments . Widely use on boat, game table, sofa, cars and so on.A boat beverage holder with a double-opening ring design for universal cups, cans, beer and mugs.
- RISK-FREE purchase! If you have any issues please feel free to contact us.
- See more on Amazon...
Brand: JT-HLM | Manufacturer: JT-HLM
See On Amazon #8
JT-HLM Boat Stainless Steel Trim Cover 3/4 Inch Straight Hose Pipe Elbow Bilge Pump Drain Thru Hull Fitting
Asin: B0CLR1GC28
▲Widely Applications：Boats Yachts Caravans Trucks Autocaravans Tractor And Many More ... Kitchen Or Grill Area..
▲Risk-Free Purchase! If You Have Any Issues ，Please Feel Free To Contact Us..
▲Suitable For：Hose 3/4 Inch(19Mm). Mounting Hole Diameter: 1-1/4 Inch(32Mm).
▲Easy Installation ：Easy And Quick For Installation, Sturdy And Well Made.(Not Recommended For Use Below The Waterline).
Features
- HIGH QUALITY MATERIAL Made of durable polypropylene to withstand the rigors of marine environments,stainless-steel flange provides excellent corrosion resistance,Ideal for use as an exhaust port for a bilge pump.
- EASY INSTALLATION Easy and quick for installation, sturdy and well made.(Not recommended for use below the waterline)
- WIDELY APPLICATIONS Boats Yachts Caravans trucks Autocaravans Tractor And many more ... kitchen or grill area.
- SUITABLE FOR Hose 3/4 inch(19mm). Mounting Hole Diameter: 1-1/4 inch(32mm)
- RISK-FREE purchase! If you have any issues please feel free to contact us.
- See more on Amazon...
Brand: JT-HLM | Manufacturer: SMART MARINE
See On Amazon #9
JT-HLM Heavy Dudy Marine Grade 316 Steel Stainless 2 Way Boat Hand Rail Fitting 90 Degree Elbow for 1" O.D. Tube Marine Hardware
Asin: B09WMCZ52Y
✔Easy To Install:Boat Rod Rail Tube Is Lightweight, Easy To Install And Carry, Which Can Better Meet Your Needs..
✔Risk-Free Purchase! If You Have Any Issues ，Please Feel Free To Contact Us..
✔Suitable For:90 Degree Elbow Suitable For 1" O.D. Tube, The Inner Diameter Is 1Inch(26Mm), The Outer Diameter Is 1.2Inch(31Mm), And The Pipe Wall Thickness Is 0.1Inch(2Mm), Overall Length Is 1.9Inch(49Mm)..
✔Durable:Maximum Corrosion Resistance And Durability In The Saltwater Environment,Polished Beautifully, Mirror-Like Finished..
Features
- HIGH QUALITY: Precision cast 316 marine grade stainless steel,precision casting, strong and durable.
- DURABLE:Maximum corrosion resistance and durability in the saltwater environment,polished beautifully, mirror-like finished.
- EASY TO INSTALL:Boat rod rail tube is lightweight, easy to install and carry, which can better meet your needs.
- SUITABLE FOR:90 Degree elbow suitable for 1 O.D. Tube, the inner diameter is 1Inch(26mm), the outer diameter is 1.2Inch(31mm), and the pipe wall thickness is 0.1Inch(2mm), overall length is 1.9Inch(49mm).
- RISK-FREE purchase! If you have any issues please feel free to contact us.
- See more on Amazon...
Brand: JT-HLM | Manufacturer: JT-HLM
See On Amazon #10
JT-HLM Marine 316 Stainless Steel 30 Degree Round Base for Boat 7/8'' Hand Railing Fittings Hardware
Asin: B09WTMF5YY
▲Size:The Diameter Of The Tube Seat Is 2.55" (65Mm); The Inner Diameter Of The Tube Is 7/8" (22Mm), The Outer Diameter Is 1.1"(28Mm); The Diameter Of The Screw Is 5Mm..
▲Risk-Free Purchase! If You Have Any Issues ，Please Feel Free To Contact Us..
▲Widely Used :For Your Bimini Top Or Handrail Installation Of Your Boat, Yacht, Or Kayak..
▲ Design Feature:The Surface Of The 30 Degree Round Base Has Been Well Polished, Which Has A Mirror Like Appearance..
Features
- HIGH QUALITY MATERIAL:Marine hatch lock is made of stainless steel 316 ,maximum corrosion resistance and durability in the saltwater environment.
- DESIGN FEATURE:The surface of the 30 degree round base has been well polished, which has a mirror like appearance.
- Size:The diameter of the tube seat is 2.55 (65mm); The inner diameter of the tube is 7/8 (22mm), the outer diameter is 1.1(28mm); The diameter of the screw is 5mm.
- WIDELY USED :For your bimini top or handrail installation of your boat, yacht, or kayak.
- RISK-FREE purchase! If you have any issues please feel free to contact us.
- See more on Amazon...
Brand: JT-HLM | Manufacturer: JT-HLM
See On Amazon #11
JT-HLM Boat Stainless Steel Hatch Spring Holder 10-1/4" Hatch Lid Support Spring Adjuster Cabin Door Support Hardware
Asin: B0BVB6GHX4
▲Wheel Size: Spring Hinge Coil Length 10-1/4"(260Mm);Diameter:14Mm;Mounting Hole Diameter Is 5Mm(Refer To The Size Chart For Specific Dimensions).
▲Risk-Free Purchase! If You Have Any Issues ,Please Feel Free To Contact Us..
▲Widely Used :You Can Use It In Various Environments.This Stainless-Steel Hatch Support Spring Holds Open Hatches, Doors, Table Leaves And Motor Boxes Cabinet, Window, Lighter Hatches, Table Leaves, Ice Box Lids, Bait Well, And A Wide Variety Of Uses..
▲Design Feature:Easy To Use, Suitable For Both Indoor And Outdoor Use.Retaining Cable To Prevent Over-Opening.Snaps Straight To Hold Lid Open And Deflects To Close..
Features
- HIGH QUALITY MATERIAL:Made up of 304 Stainless Steel,material with water and corrosion resistance and long-term durability.
- DESIGN FEATURE:Easy to use, suitable for both indoor and outdoor use.Retaining cable to prevent over-opening.Snaps straight to hold lid open and deflects to close.
- WHEEL SIZE: Spring Hinge Coil Length 10-1/4(260mm);Diameter:14mm;Mounting hole diameter is 5mm(Refer to the size chart for specific dimensions)
- WIDELY USED :You can use it in various environments.This stainless-steel Hatch Support Spring holds open hatches, doors, table leaves and motor boxes cabinet, window, lighter hatches, table leaves, ice box lids, bait well, and a wide variety of uses.
- RISK-FREE purchase! If you have any issues ,please feel free to contact us.
- See more on Amazon...
Brand: JT-HLM | Manufacturer: JT-HLM
Warranty: 1 Year
See On Amazon #12
JT-HLM Boat Stainless Steel 6-8mm Anchor Chain Lock Rope Mooring Device Anchor Chain Stopper Hardware
Asin: B0B3XK26TL
✔Size:Anchor Chain Lock Is Suitable For 6-8Mm/0.24-0.31In Rope Or Chain,The Length Is 4.76"/121Mm.(Refer To The Size Chart For Specific Dimensions).
✔Risk-Free Purchase! If You Have Any Issues ，Please Feel Free To Contact Us..
✔Portable :Easy To Install Light And Portable, Does Not Take Up Space, Can Be Placed Anywhere,No Additional Adjustments..
✔Design Features: Advanced Lock Ring Design.Excellent For Anchor Rodes And Leads Chain Helps Protect Your Anchor Line From Bottom Damage..
Features
- HIGH QUALITY MATERIAL:Made of 316 stainless steel high hardness, strong impact resistance, maximum corrosion resistance and durability in the saltwater environment.
- DESIGN FEATURES: Advanced Lock Ring Design.Excellent for anchor rodes and leads chain helps protect your anchor line from bottom damage.
- SIZE:Anchor Chain Lock is suitable for 6-8mm/0.24-0.31in rope or chain,the length is 4.76/121mm.(Refer to the size chart for specific dimensions)
- PORTABLE :Easy to install light and portable, does not take up space, can be placed anywhere,no additional adjustments.
- RISK-FREE purchase! If you have any issues please feel free to contact us.
- See more on Amazon...
Brand: JT-HLM | Manufacturer: JT-HLM
See On Amazon #13
JT-HLM Heavy Duty Anchor Chain Swivel Connector 316 Stainless Steel Multi-Directional Double Anchor Swivel Connector (1/4"-5/16")
Asin: B0BVDL8RX9
✔Size:Anchor Chain Mooring Swivel Connector Up To 1/4"-5/16"(6-8Mm)，Total Length Is 92Mm / 3.62";The Length Of The Two Sections Is: 1.45 "/37Mm,2.16"/55Mm;Please Refer To The Picture For Details..
✔Double Swivel:They Are Designed With An Oval Shape For Perfect Sliding Through The Roller. The Double Swivel Allows It To Rotate In Two Directions: Around Its Axis And Horizontally / Vertically..
✔Portable And Security:Boat Anchor Chain Connector Light And Portable, Does Not Take Up Space, Can Be Placed Anywhere.Hexagonal Head Locking Bolts Prevent The Need For Additional Grub Screws To Secure The Swivel Pins.The Breaking Strength Of A Swivel Is Typically Higher Than The Connected Chain..
✔ Design Feature:Reliably Ensures Effective Anchoring By Allowing Anchor Chain To Swivel Prevents Chain And Anchor Rope From Getting Twisted.Lessens Effects Of Lateral Forces That Can Stress Anchor Connection To Chain Or Chain To Anchor Line..
Features
- HIGH QUALITY MATERIAL:Boat anchor chain connector made of 316 Stainless steel material, not easy to corrosion, not easy to break.
- DESIGN FEATURE:Reliably ensures effective anchoring by allowing anchor chain to swivel Prevents chain and anchor rope from getting twisted.Lessens effects of lateral forces that can stress anchor connection to chain or chain to anchor line.
- Size:Anchor chain Mooring swivel connector Up to 1/4-5/16(6-8mm) Total length is 92mm / 3.62;The length of the two sections is: 1.45 /37mm,2.16/55mm;Please refer to the picture for details.
- PORTABLE AND SECURITY:Boat anchor chain connector light and portable, does not take up space, can be placed anywhere.Hexagonal head locking bolts prevent the need for additional grub screws to secure the swivel pins.The breaking strength of a swivel is typically higher than the connected chain.
- DOUBLE SWIVEL:They are designed with an oval shape for perfect sliding through the roller. The double swivel allows it to rotate in two directions: around its axis and horizontally / vertically.
- See more on Amazon...
Brand: JT-HLM | Manufacturer: JT-HLM
Warranty: 1 Year
See On Amazon #14
JT-HLM Boat 360 Degree Rod Holder Drop-in Swivel Insert/Adapter,316 Stainless Steel Marine Fishing Pole Converter Pack of 2
Asin: B0C1BQ41KK | Model: ZHQ-0002 | PartNumber: ZHQ-0002
✔Size:Height: 2.25 Inch (57 Mm); Od: 1-1/2 Inch (38 Mm). It Will Fit A Rod Holder Butt With 1-9/16 Inches (39.6 Mm) Or Smaller Outside Diameter. It May Be Used With Either 30 Degrees, 60 Degrees, Or 90-Degree Rod Holder.(Refer To The Size Chart For Specific Dimensions).
✔Risk-Free Purchase! If You Have Any Issues ，Please Feel Free To Contact Us..
✔Easy Installation:Drop-In Swivel Is Easy To Install, No Complicated Operation Is Required, And The Rotary Joint Can Instantly Convert Any Gun Inner Rod Bracket Into A Rotary Rod Bracket..
✔Design Feature:With This Drop-In Swivel, The Tip Of The Fishing Rod Can Follow The Trajectory Of The Fish, And The Line Can Pass Freely On The Drum Without Any Friction. And Can Help Your Rod Holder Pin Depth 1-1/2 Inches, The Upward Rotating Part With Drainage Holes, Will Not Retain Water..
Features
- HIGH QUALITY MATERIAL:It is made of high-quality 316 stainless steel, strong and durable, not easy to bend and deform, and wear-resistant. Good weather resistance, sea water resistance and long service life.
- DESIGN FEATURE:With this drop-in swivel, the tip of the fishing rod can follow the trajectory of the fish, and the line can pass freely on the drum without any friction. And can help your rod holder pin depth 1-1/2 inches, the upward rotating part with drainage holes, will not retain water.
- SIZE:Height: 2.25 inch (57 mm); OD: 1-1/2 inch (38 mm). It Will fit a rod holder butt with 1-9/16 inches (39.6 mm) or smaller outside diameter. It may be used with either 30 degrees, 60 degrees, or 90-degree rod holder.(Refer to the size chart for specific dimensions)
- EASY INSTALLATION:Drop-in swivel is easy to install, no complicated operation is required, and the rotary joint can instantly convert any gun inner rod bracket into a rotary rod bracket.
- RISK-FREE purchase! If you have any issues please feel free to contact us.
- See more on Amazon...
Brand: JT-HLM | Manufacturer: JT-HLM
Warranty: 1 Year
See On Amazon #15
JT-HLM 9" x 4-1/2" Boat Stainless Steel Rectangular Stamped Louvered Air Cabin Vent Grill Cover Ventilation Marine Accessories Boats Ships Yachts Kayaks
Asin: B09WMD5VVM
✔Widely Used：Designed To Cover Wall Or Ceiling Openings And Ducting Vents.Great For Related Vents In Boats, Marine, Yacht, Caravan, Home And So On..
✔Risk-Free Purchase! If You Have Any Issues,Please Feel Free To Contact Us..
✔Suitable For Size:Length: 9"(228Mm), Width: 4-1/2"(115Mm);Mounting Hole Diameter:Approx 5Mm/0.16 Inch;Thickness:0.8Mm /0.03 Inch..
✔Designed Features ：Designed To Cover Wall Or Ceiling Openings And Ducting Vents,Easy To Mount On Your Boat.Vent Louvered Design Keeps Unwanted Elements Out While Allowing Air To Pass Through..
Features
- HIGH QUALITY MATERIAL Made of Stainless Steel ,anti-corrosion and anti-rust, good durability.Surface mount marine vents with raised louvres.
- DESIGNED FEATURES Designed to cover wall or ceiling openings and ducting vents,easy to mount on your boat.Vent louvered design keeps unwanted elements out while allowing air to pass through.
- WIDELY USED Designed to cover wall or ceiling openings and ducting vents.Great for related vents in boats, marine, yacht, caravan, home and so on.
- SUITABLE FOR SIZE:Length: 9(228mm), Width: 4-1/2(115mm);Mounting Hole Diameter:Approx 5mm/0.16 inch;Thickness:0.8mm /0.03 inch.
- RISK-FREE purchase! If you have any issues,please feel free to contact us.
- See more on Amazon...
Brand: JT-HLM | Manufacturer: JT-HLM
See On Amazon #16
JT-HLM Boat 8mm Stainless Steel Anchor Assist Retrieval Ring and Rope Anchor Retrieval Device System Marine Hardware
Asin: B09WTL1DVQ
✔Dimensions: Wire Dia.: 8Mm; Ring O.D.: 141Mm;Small Ring I.D.: 24Mm;Opening Size: 19Mm..
✔Simple Retrieve:Throw The Ring Around Your Anchor Line, Put The Loop On A Polyform Buoy. Run Forward And Lift Your Anchor, Then Easily Haul It In..
✔Easy-To-Use Anchor Retrieval System - Anchor Your Boat As Normal. When Ready To Raise Your Anchor Clip The Anchor Ring To Your Anchor Line And Throw The Buoy Into The Water. Motor Forward Around Your Anchor Line To Break Your Anchor Free. Continue To Motor Forward Until The Anchor Reaches The Surface..
✔ Design Feature:The Anchor Ring Will Assist In Raising Your Anchor From The Seabed Using The Buoyancy Of A Buoy (Not Supplied) To Lift The Anchor To The Surface Making It Easy To Retrieve With Minimal Hard Lifting..
Features
- HIGH QUALITY MATERIAL:Made of solid Stainless Steel for durability and resistance to rust and corrosion.
- DESIGN FEATURE:The Anchor Ring will assist in raising your anchor from the seabed using the buoyancy of a buoy (not supplied) to lift the anchor to the surface making it easy to retrieve with minimal hard lifting.
- DIMENSIONS: Wire Dia.: 8mm; Ring O.D.: 141mm;Small ring I.D.: 24mm;Opening size: 19mm.
- EASY-TO-USE ANCHOR RETRIEVAL SYSTEM - Anchor your boat as normal. When ready to raise your anchor clip the Anchor Ring to your anchor line and throw the buoy into the water. Motor forward around your anchor line to break your anchor free. Continue to motor forward until the anchor reaches the surface.
- SIMPLE RETRIEVE:Throw the ring around your anchor line, put the loop on a Polyform buoy. Run forward and lift your anchor, then easily haul it in.
- See more on Amazon...
Brand: JT-HLM | Manufacturer: JT-HLM
See On Amazon #17
JT-HLM Boat Stainless Steel Trim Cover 5/8" Straight Hose Pipe Elbow Bilge Pump Drain Thru Hull Fitting
Asin: B0CS5GJJF6
▲Widely Applications：Boats Yachts Caravans Trucks Autocaravans Tractor And Many More ... Kitchen Or Grill Area..
▲Risk-Free Purchase! If You Have Any Issues ，Please Feel Free To Contact Us..
▲Suitable For：Hose 5/8 Inch(16Mm)..
▲Easy Installation ：Easy And Quick For Installation, Sturdy And Well Made.(Not Recommended For Use Below The Waterline).
Features
- HIGH QUALITY MATERIAL Made of durable polypropylene to withstand the rigors of marine environments,stainless-steel flange provides excellent corrosion resistance,Ideal for use as an exhaust port for a bilge pump.
- EASY INSTALLATION Easy and quick for installation, sturdy and well made.(Not recommended for use below the waterline)
- WIDELY APPLICATIONS Boats Yachts Caravans trucks Autocaravans Tractor And many more ... kitchen or grill area.
- SUITABLE FOR Hose 5/8 inch(16mm).
- RISK-FREE purchase! If you have any issues please feel free to contact us.
- See more on Amazon...
Brand: JT-HLM | Manufacturer: SMART MARINE
See On Amazon #18
JT-HLM Boat Stainless Steel Trim Cover 1" Straight Hose Pipe Elbow Bilge Pump Drain Thru Hull Fitting
Asin: B0CS5FWDZY
▲Widely Applications：Boats Yachts Caravans Trucks Autocaravans Tractor And Many More ... Kitchen Or Grill Area..
▲Risk-Free Purchase! If You Have Any Issues ，Please Feel Free To Contact Us..
▲Suitable For：Hose 1 Inch(25Mm). Mounting Hole Diameter: 1-1/4 Inch(32Mm).
▲Easy Installation ：Easy And Quick For Installation, Sturdy And Well Made.(Not Recommended For Use Below The Waterline).
Features
- HIGH QUALITY MATERIAL Made of durable polypropylene to withstand the rigors of marine environments,stainless-steel flange provides excellent corrosion resistance,Ideal for use as an exhaust port for a bilge pump.
- EASY INSTALLATION Easy and quick for installation, sturdy and well made.(Not recommended for use below the waterline)
- WIDELY APPLICATIONS Boats Yachts Caravans trucks Autocaravans Tractor And many more ... kitchen or grill area.
- SUITABLE FOR Hose 1 inch(25mm). Mounting Hole Diameter: 1-1/4 inch(32mm)
- RISK-FREE purchase! If you have any issues please feel free to contact us.
- See more on Amazon...
Brand: JT-HLM | Manufacturer: SMART MARINE
See On Amazon #19
JT-HLM Boat Anchor Chain Stopper Stainless Steel Heavy Duty Part Stopper Chain for 5/16 " to 1/4 "
Asin: B0B3XJ6Z6S
✔Size:Anchor Stopper Is With 0.43" (11Mm) Groove Which's Ideal For 5/16" And 1/4" Chain.The Base Width: 53Mm / 2.1", The Base Length: 58Mm / 2.28", The Height Is 47Mm / 1.85"(Refer To The Size Chart For Specific Dimensions).
✔Risk-Free Purchase! If You Have Any Issues ，Please Feel Free To Contact Us..
✔Portable :Marine Chain Stopper Is Compact, Light And Portable, Does Not Take Up Space, Can Be Placed Anywhere..
✔ Design Feature:Removable Pawl Flips Up When Not In Use. It Includes A Quick Release Pin..
Features
- HIGH QUALITY MATERIAL:Marine Part Chain Stopper is made of stainless steel,durable, firm and reliable, and has a long service life.
- DESIGN FEATURE:Removable Pawl flips up when not in use. It includes a quick release pin.
- Size:Anchor stopper is with 0.43 (11mm) groove which's ideal for 5/16 and 1/4 chain.The base width: 53mm / 2.1, the base length: 58mm / 2.28, the height is 47mm / 1.85(Refer to the size chart for specific dimensions)
- PORTABLE :Marine Chain Stopper is compact, light and portable, does not take up space, can be placed anywhere.
- RISK-FREE purchase! If you have any issues please feel free to contact us.
- See more on Amazon...
Brand: JT-HLM | Manufacturer: JT-HLM
See On Amazon #20
JT-HLM 4 inch Boat Deck Plate Hatch ABS Marine Round Inspection Deck Plate Hatch with Detachable Clear Lid for Boat Yacht
Asin: B0CRDV235K
✔Automatic Pop-Up:The Ship Deck Access Hatch Is Easy To Open, Just Open 90 Degrees To The Left, The Specially Designed Thread Pops Up Automatically, Suitable For All Kinds Of Boats/Yachts, Very Suitable For Indoor And Outdoor Applications..
✔Good Waterproof:The O-Ring Seal Around Cover Keeps Water Out.The O-Ring Is Secured Under The Cap, Eliminating The Problem Of The O-Ring Falling Out When It Was Placed On The Base(Need To Install With 6Mm Screws)..
✔Suitable For Size:Inside Diameter: 4" (150Mm).
✔Easy To Install:The Ship Deck Access Port Has An Independent Cover And Chassis, With A Surface That Can Be Installed Horizontally And Vertically. The Transparent Cover Is Easy To Remove And Allows Direct Observation Of The Internal Conditions..
Features
- HIGH QUALITY MATERIAL:Deck plate hatch with clear lid is made of ABS Plastic, which is anti-aging and used to increase the resistance to sunlight, water and salt.
- EASY TO INSTALL:The ship deck access port has an independent cover and chassis, with a surface that can be installed horizontally and vertically. The transparent cover is easy to remove and allows direct observation of the internal conditions.
- AUTOMATIC POP-UP:The ship deck access hatch is easy to open, just open 90 degrees to the left, the specially designed thread pops up automatically, suitable for all kinds of boats/yachts, very suitable for indoor and outdoor applications.
- SUITABLE FOR SIZE:Inside Diameter: 4 (150mm)
- GOOD WATERPROOF:The O-ring seal around cover keeps water out.The O-Ring is secured under the cap, eliminating the problem of the O-Ring falling out when it was placed on the base(Need to install with 6mm screws).
- See more on Amazon...
Brand: JT-HLM | Manufacturer: JT-HLM
Warranty: 1 Year
See On Amazon #21
JT-HLM Boat 1-1/8'' Black Trim Cover 90 Degrees Hose Pipe Elbow Bilge Pump Drain Thru Hull Fitting
Asin: B0CT57DHC7
✔Widely Applications：Boats Yachts Caravans Trucks Autocaravans Tractor And Many More ... Kitchen Or Grill Area..
✔Risk-Free Purchase! If You Have Any Issues ，Please Feel Free To Contact Us..
✔Suitable For Size：Outer Diameter Of Pipe 1-1/8Inch（See The Picture For The Specific Size）.
✔Easy Installation ：Easy And Quick For Installation, Designed For Easier Applications Where Hose Is Difficult To Route.(Not Recommended For Use Below The Waterline).
Features
- HIGH QUALITY MATERIAL Made of durable polypropylene to withstand the rigors of marine environments,highly mirror polished 316 Stainless-steel flange offers excellent corrosion resistance,Ideal for use as an exhaust port for a bilge pump.
- EASY INSTALLATION Easy and quick for installation, designed for easier applications where hose is difficult to route.(Not recommended for use below the waterline)
- WIDELY APPLICATIONS Boats Yachts Caravans trucks Autocaravans Tractor And many more ... kitchen or grill area.
- SUITABLE FOR SIZE Outer diameter of pipe 1-1/8inch See the picture for the specific size
- RISK-FREE purchase! If you have any issues please feel free to contact us.
- See more on Amazon...
Brand: JT-HLM | Manufacturer: JT-HLM
See On Amazon #22
JT-HLM Boat Stainless Steel Trim Cover 1-1/2 Inch Straight Hose Pipe Elbow Bilge Pump Drain Thru Hull Fitting
Asin: B0CS5DJSTY
▲Widely Applications：Boats Yachts Caravans Trucks Autocaravans Tractor And Many More ... Kitchen Or Grill Area..
▲Risk-Free Purchase! If You Have Any Issues ，Please Feel Free To Contact Us..
▲Suitable For：Hose 1-1/2 Inch(38.1Mm).
▲Easy Installation ：Easy And Quick For Installation, Sturdy And Well Made.(Not Recommended For Use Below The Waterline).
Features
- HIGH QUALITY MATERIAL Made of durable polypropylene to withstand the rigors of marine environments,stainless-steel flange provides excellent corrosion resistance,Ideal for use as an exhaust port for a bilge pump.
- EASY INSTALLATION Easy and quick for installation, sturdy and well made.(Not recommended for use below the waterline)
- WIDELY APPLICATIONS Boats Yachts Caravans trucks Autocaravans Tractor And many more ... kitchen or grill area.
- SUITABLE FOR Hose 1-1/2 inch(38.1mm)
- RISK-FREE purchase! If you have any issues please feel free to contact us.
- See more on Amazon...
Brand: JT-HLM | Manufacturer: SMART MARINE
See On Amazon #23
JT-HLM Marine Boat LED Navigation Light Green Starboard,Red Port Side,White Stern 3Pcs Black ABS Waterproof IP66
Asin: B0CHVF96M5 | Model: 1 | PartNumber: 1
✔Simple Installation, No Need Complicated Tools, Convenient For Using.Can Be Used As Starboard, Port Side And Stern To Improve The Navigation Safety..
✔Risk-Free Purchase! If You Have Any Issues ,Please Feel Free To Contact Us. 24-Hour Customer Supports..
✔This Bow Navigation Light With Both Style And Durability Works Great To Add Or Upgrade Your Existing Running Lights To Improve The Safety When Boating, Especially At Night.Suitable For Most Pontoon, Yacht, Skeeter, Touring Car, Fishing Boat, Speed Boat And Other Boats..
✔Marine Boat Led Navigation Starboard Light Surface Mount 12V Black Abs Has A Waterproof And Dust-Proof Rating Of Ip:66. The Color Temperature For This Item Is 5500-6300K And Has A Visibility Of 2Nm.
Features
- This is a LED Navigation Light in Black ABS housing. This light has a modern design and an optimized size that features the latest energy saving LED technology. This light is non-corrosive and non-magnetic. It is highly durable and is shock and seawater resistant.
- Marine Boat LED Navigation Starboard Light Surface Mount 12V Black ABS has a waterproof and dust-proof rating of IP:66. The color temperature for this item is 5500-6300K and has a visibility of 2NM
- Simple installation, no need complicated tools, convenient for using.Can be used as Starboard, Port Side and Stern to improve the navigation safety.
- This bow navigation light with both style and durability works great to add or upgrade your existing running lights to improve the safety when boating, especially at night.Suitable for most pontoon, yacht, skeeter, touring car, fishing boat, speed boat and other boats.
- RISK-FREE purchase! If you have any issues ,please feel free to contact us. 24-Hour Customer Supports.
- See more on Amazon...
Brand: JT-HLM | Manufacturer: JT-HLM
See On Amazon #24
JT-HLM 4 inch Boat Hatch 316 Stainless Steel Round Non Slip 2 Eyes Inspection Hatch Deck Plate with Detachable Cover For Marine Boat Yachts Ships
Asin: B0C13CYRKP
✔Good Waterproof:4 Inch Inside Diameter Port Hole With The O-Ring Seal Around Cover Keeps Water Out(Need To Install With 5Mm Screws)..
✔Good Erformance:Even If Exposed To The Sun For A Long Time, It Is Not Easy To Deform And Become Brittle. Excellent Resistance Makes It Durable In Rain And Sea Water Environment. High Impact Resistance Also Allows It To Be Installed In Places Exposed To Heavy Treads, Such As Ship Decks..
✔Suitable For Size:The Diameter Of Splint Plate:5.5 Inch(140Mm);Cover Diameter:4.2 Inch(107Mm);The Inside Diameter Of:4 Inch(102Mm);Outer Diameter:4.3 Inch(110Mm)..
✔Easy To Install:Simple Installation, No Drilling Or Welding Required. Direct Replacement For The Old Or Broken One.The High Grade Inspection Hatch Comes With Pre‑Drilled Countersunk Holes (Screws Not Included) For Convenient Installation..
Features
- HIGH QUALITY MATERIAL:Made of 316 stainless steel, this deck plate wil retain an attractive, clean finish with low maintenance for the discriminating yachtsman, outside of a long service life.Heavy duty lid with non-slip, mirrow polished surface.
- EASY TO INSTALL:Simple installation, no drilling or welding required. Direct replacement for the old or broken one.The high grade inspection hatch comes with pre drilled countersunk holes (screws not included) for convenient installation.
- GOOD WATERPROOF:4 Inch inside diameter port hole with the O-ring seal around cover keeps water out(Need to install with 5mm screws).
- SUITABLE FOR SIZE:The diameter of splint plate:5.5 inch(140mm);Cover diameter:4.2 inch(107mm);The inside diameter of:4 inch(102mm);Outer diameter:4.3 inch(110mm).
- GOOD ERFORMANCE:Even if exposed to the sun for a long time, it is not easy to deform and become brittle. Excellent resistance makes it durable in rain and sea water environment. High impact resistance also allows it to be installed in places exposed to heavy treads, such as ship decks.
- See more on Amazon...
Brand: JT-HLM | Manufacturer: JT-HLM
Warranty: 1 Year
See On Amazon #25
JT-HLM Heavy Duty Boat Anchor Chain Swivel Connector 316 Stainless Steel Multi-Directional Double Anchor Roller(1/4"-5/16" )
Asin: B0B3XFYGPQ
✔Size:Anchor Chain Mooring Swivel Connector Up To 1/4"-5/16"(6-8Mm)，The Length Is 120Mm / 4.7"(Refer To The Size Chart For Specific Dimensions).
✔Double Swivel:They Are Designed With An Oval Shape For Perfect Sliding Through The Roller. The Double Swivel Allows It To Rotate In Two Directions: Around Its Axis And Horizontally / Vertically..
✔Portable :Boat Anchor Chain Connector Light And Portable, Does Not Take Up Space, Can Be Placed Anywhere..
✔ Design Feature:Reliably Ensures Effective Anchoring By Allowing Anchor Chain To Swivel Prevents Chain And Anchor Rope From Getting Twisted.Lessens Effects Of Lateral Forces That Can Stress Anchor Connection To Chain Or Chain To Anchor Line..
Features
- HIGH QUALITY MATERIAL:Boat anchor chain connector made of 316 Stainless steel material, not easy to corrosion, not easy to break.
- DESIGN FEATURE:Reliably ensures effective anchoring by allowing anchor chain to swivel Prevents chain and anchor rope from getting twisted.Lessens effects of lateral forces that can stress anchor connection to chain or chain to anchor line.
- Size:Anchor chain Mooring swivel connector Up to 1/4-5/16(6-8mm) the length is 120mm / 4.7(Refer to the size chart for specific dimensions)
- PORTABLE :Boat anchor chain connector light and portable, does not take up space, can be placed anywhere.
- DOUBLE SWIVEL:They are designed with an oval shape for perfect sliding through the roller. The double swivel allows it to rotate in two directions: around its axis and horizontally / vertically.
- See more on Amazon...
Brand: JT-HLM | Manufacturer: JT-HLM
See On Amazon #26
JT-HLM 90 Degree 1-1/2'' Nylon Thru Hull Connector,Black Deck Drain with Stainless Steel Trim Cover, Hose Pipe Elbow Bilge Pump Drain Thru Hull Fitting
Asin: B0CDBVC4XH
✔Widely Applications：Boats Yachts Caravans Trucks Autocaravans Tractor And Many More ... Kitchen Or Grill Area..
✔Risk-Free Purchase! If You Have Any Issues ，Please Feel Free To Contact Us..
✔Suitable For Size：Outer Diameter Of Pipe 1-1/2Inch(38.1Mm).（See The Picture For The Specific Size）.
✔Easy Installation ：Easy And Quick For Installation, Designed For Easier Applications Where Hose Is Difficult To Route.(Not Recommended For Use Below The Waterline).
Features
- HIGH QUALITY MATERIAL Made of durable polypropylene to withstand the rigors of marine environments,highly mirror polished 316 Stainless-steel flange offers excellent corrosion resistance,Ideal for use as an exhaust port for a bilge pump.
- EASY INSTALLATION Easy and quick for installation, designed for easier applications where hose is difficult to route.(Not recommended for use below the waterline)
- WIDELY APPLICATIONS Boats Yachts Caravans trucks Autocaravans Tractor And many more ... kitchen or grill area.
- SUITABLE FOR SIZE Outer diameter of pipe 1-1/2inch(38.1mm). See the picture for the specific size
- RISK-FREE purchase! If you have any issues please feel free to contact us.
- See more on Amazon...
Brand: JT-HLM | Manufacturer: JT-HLM
See On Amazon #27
JT-HLM 2PCS Boat Cleat Open Base Boat Cleat,4 Inch Dock Cleat Mooring Rope Cleat Stainless Steel Yacht Kayak Accessories
Asin: B0CS593BGW
✔Widely Applications：Our Cleat Worked Great As Boat Cleat, Dock Cleat,Curtain Tie, Hooks.Apply This Boat Cleat To Your Kitchen, Entryway, Bedroom Or Bathroom With Nautical Boat Cleats. Perfect Accent For A Lakeside Cottage, Nautical Themed Room Or Add As A Unique Accent To Furniture For Your Home..
✔Risk-Free Purchase! If You Have Any Issues ，Please Feel Free To Contact Us..
✔Suitable For：Total Length: 3.89 Inches/99 Mm;Height: 0.87 Inches/22 Mm;Fastener Hole Diameter: 0.2 Inches/5 Millimeters.Please Refer To The Picture For Details.There Are 2 Bolts In The Product Package..
✔Easy Installation ：The 3.9 Inch（About 4 Inch）Dock Cleats Is Designed With Secure Four-Hole Mounting Base.Easy And Quick For Installation, Sturdy And Well Made..
Features
- HIGH QUALITY MATERIAL This open-base cleats made of highly-polished stainless steel, providing the ultimate in corrosion protection when anchoring or docking in freshwater or saltwater.
- EASY INSTALLATION The 3.9 inch About 4 inch dock cleats is designed with secure four-hole mounting base.Easy and quick for installation, sturdy and well made.
- WIDELY APPLICATIONS Our cleat worked great as boat cleat, dock cleat,curtain tie, hooks.Apply this boat cleat to your kitchen, entryway, bedroom or bathroom with nautical boat cleats. Perfect accent for a lakeside cottage, nautical themed room or add as a unique accent to furniture for your home.
- SUITABLE FOR Total length: 3.89 inches/99 mm;Height: 0.87 inches/22 mm;Fastener hole diameter: 0.2 inches/5 millimeters.Please refer to the picture for details.There are 2 bolts in the product package.
- RISK-FREE purchase! If you have any issues please feel free to contact us.
- See more on Amazon...
Brand: JT-HLM | Manufacturer: JT-HLM
See On Amazon #28
JT-HLM 5 inch Boat Hatch 316 Stainless Steel Round Non Slip 2 Eyes Inspection Hatch Deck Plate with Detachable Cover w/Fasteners For Marine Boat Yachts Ships
Asin: B0B428X4SF
✔Good Waterproof:4 Inch Inside Diameter Port Hole With The O-Ring Seal Around Cover Keeps Water Out(Need To Install With 5Mm Screws)..
✔Good Erformance:Even If Exposed To The Sun For A Long Time, It Is Not Easy To Deform And Become Brittle. Excellent Resistance Makes It Durable In Rain And Sea Water Environment. High Impact Resistance Also Allows It To Be Installed In Places Exposed To Heavy Treads, Such As Ship Decks..
✔Suitable For Size:The Diameter Of Splint Plate:6.89 Inch(175Mm);Cover Diameter:5.24 Inch(133Mm);The Inside Diameter Of:5 Inch(127Mm);Outer Diameter:135 Inch(5.31Mm)..
✔Easy To Install:Simple Installation, No Drilling Or Welding Required. Direct Replacement For The Old Or Broken One.The High Grade Inspection Hatch Comes With Pre‑Drilled Countersunk Holes (Screws Not Included) For Convenient Installation..
Features
- HIGH QUALITY MATERIAL:Made of 316 stainless steel, this deck plate wil retain an attractive, clean finish with low maintenance for the discriminating yachtsman, outside of a long service life.Heavy duty lid with non-slip, mirrow polished surface.
- EASY TO INSTALL:Simple installation, no drilling or welding required. Direct replacement for the old or broken one.The high grade inspection hatch comes with pre drilled countersunk holes (screws not included) for convenient installation.
- GOOD WATERPROOF:4 Inch inside diameter port hole with the O-ring seal around cover keeps water out(Need to install with 5mm screws).
- SUITABLE FOR SIZE:The diameter of splint plate:6.89 inch(175mm);Cover diameter:5.24 inch(133mm);The inside diameter of:5 inch(127mm);Outer diameter:135 inch(5.31mm).
- GOOD ERFORMANCE:Even if exposed to the sun for a long time, it is not easy to deform and become brittle. Excellent resistance makes it durable in rain and sea water environment. High impact resistance also allows it to be installed in places exposed to heavy treads, such as ship decks.
- See more on Amazon...
Brand: JT-HLM | Manufacturer: JT-HLM
See On Amazon #29
JT-HLM Boat River Anchor 18lb 8kg Cast Iron Black Vinyl Coated Marine Anchor
Asin: B09ZTY14GZ
✔Size:Weight Is 12 Lb ( 5.5 Kilograms) /18Lb(8.17Kilograms)/ 20Lb(9.08Kilograms)(Please Refer To The Picture For Size).
✔Hold Your Boat Firmly In Place: This Anchor Combines The Features Of A Traditional Mushroom Anchor With Flukes For Better Bottom Penetration; It’S One Of Our Must-Have Boat Accessories..
✔Widely Used :River Anchors Catch And Hold River Bottoms With Mud, Rocks, Stumps, And Brush.The River Anchor Is Ideal For Pontoon And Bass Boats..
✔Design Feature:Easy Installation.Highly Effective Design Ensures Anchor Will Penetrate The Bottom..
Features
- HIGH QUALITY MATERIAL:River anchor cast iron construction with durable black vinyl coating.
- DESIGN FEATURE:Easy Installation.Highly effective design ensures anchor will penetrate the bottom.
- SIZE:Weight is 12 LB ( 5.5 kilograms) /18LB(8.17kilograms)/ 20LB(9.08kilograms)(Please refer to the picture for size)
- WIDELY USED :River anchors catch and hold river bottoms with mud, rocks, stumps, and brush.The River Anchor is ideal for pontoon and bass boats.
- HOLD YOUR BOAT FIRMLY IN PLACE: This anchor combines the features of a traditional mushroom anchor with flukes for better bottom penetration; it s one of our must-have boat accessories.
- See more on Amazon...
Brand: JT-HLM | Manufacturer: JT-HLM
See On Amazon #30
JT-HLM 2 Pcs Boat Bimini Top Deck Swivel Hinge Side Mount 316 Stainless Steel 180 Deck hinge with Screws and Rubber Pad
Asin: B0BCF5FQPT
✔Hinge Size: Overall Length 2-3/4"（70Mm) ,Overall Width 1" (25Mm), Overall Height 46Mm,Distance Between Two Holes 2" (50Mm) (Refer To The Size Chart For Specific Dimensions).
✔Unique Design:Boat Top Hinges Bimini Mounts Use With Any Bimini Top Cap Fitting.These Deck Hinge Were Exactly What We Needed To Mount Our Binimi Top With Since They Perfectly Swivel For Any Surface,This Gave Stainless Steel Deck Hinge The Flexibility It Needed So As To Not Snap The Plastic Tabs On The End Of The Bimini Tubes..
✔Widely Used :You Can Deck Hinge To Be Mounted On Almost Any Angle. Mounting For On Ship Yachts, Fiberglass Boats, Inflatable Boats, Yachts And Other Boats And Awnings..
✔Design Feature:Sturdy Pivoting Deck Hinge Allows 180 Degrees Of Swivel In The Hinge And Allows Horizontal Or Vertical Mount.Direct Replacement For The Old Or Broken..
Features
- HIGH QUALITY MATERIAL:Boat 180 Deck hinge made of marine grade 316 stainless steel,durable,highly polished and with rubber pad and mount screws.
- DESIGN FEATURE:Sturdy pivoting deck hinge allows 180 degrees of swivel in the hinge and allows horizontal or Vertical mount.Direct replacement for the old or broken.
- Hinge Size: Overall Length 2-3/4 70mm) ,Overall Width 1 (25mm), Overall Height 46mm,Distance between two holes 2 (50mm) (Refer to the size chart for specific dimensions)
- WIDELY USED :You can deck hinge to be mounted on almost any angle. Mounting for on ship yachts, fiberglass boats, inflatable boats, yachts and other boats and awnings.
- UNIQUE DESIGN:Boat top hinges bimini mounts use with any bimini top cap fitting.these deck hinge were exactly what we needed to mount our binimi top with since they perfectly swivel for any surface,This gave stainless steel deck hinge the flexibility it needed so as to not snap the plastic tabs on the end of the bimini tubes.
- See more on Amazon...
Brand: JT-HLM | Manufacturer: JT-HLM
See On Amazon