Jims Usa - Buying Guide
Last Updated: 04/19/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
Jims Fork Leg And Tube Holder Tool 2251
Asin: B000GVBTYY | Ean: 0744890863375 | UPC: 744890863375
Will Not Scratch Finishes.
Use On Smaller Or Larger Fork Tubes With A Maximum 2 Diameter.
Mounts In A Vise To Hold The Fork Firmly During Repair Without Causing Damage To The Fork Assembly.
Features
- Holds fork legs and tubes for easy hands free servicing or re-building
- Mounts in a vise to hold the fork firmly during repair without causing damage to the fork assembly
- Will not scratch finishes
- Use on smaller or larger fork tubes with a maximum 2 diameter
- See more on Amazon...
Brand: Jims USA | Manufacturer: Jims
Dimensions: 3.00 x 7.50 x 6.50 inches | Weight: 1.14 pounds
See On Amazon #2
Jims 6 Gallon Fuel Pump Retainer Remover Tool 954
Asin: B001F213T4
Use On 2008 Xlh Fuel Tanks.
Note: If You Try To Remove The Fuel Tank Cam Retaining Ring With A Hammer And Chisel, You Will Make Sparks And Fuel Tank Could Explode!.
Removes The Fuel Tank Cam Retaining Ring Safely And Without Causing Damage To The Tank.
Features
- This tool is used to gain access to the fuel filter or fuel pump assembly and all other parts located inside the gas tank
- Removes the fuel tank cam retaining ring safely and without causing damage to the tank
- Use on 2008 XLH fuel tanks
- NOTE: If you try to remove the fuel tank cam retaining ring with a hammer and chisel, you will make sparks and fuel tank could explode!
- See more on Amazon...
Brand: Jims USA | Manufacturer: Jims
Dimensions: 3.30 x 9.70 x 4.30 inches | Weight: 1.80 pounds
See On Amazon #3
Jims Steering Head Bearing Race Installer
Asin: B000WK6VVA | Ean: 2395070222819, 0748264477236 | UPC: 748264477236
For Stock Or Custom Frames.
Made In The Usa.
Features
- Use to install races and cups straight and true in the steering head
- Made in the USA
- For stock or custom frames
- See more on Amazon...
Brand: Jims USA | Manufacturer: JIMS
Dimensions: 2.00 x 11.50 x 2.00 inches | Weight: 1.50 pounds
See On Amazon #4
Jims USA Third Hand Belt Tension Tool
Asin: B001KOBPGS | Model: 8542063291 | PartNumber: 8542063291 | Ean: 0747103794367 | UPC: 747103794367
Place This Tool Over The Welded Nut On Left Side With The Neck Portion Of Tool Resting Over The Swingarm.
Torque The Axle Nut From The Right Side Knowing That The Welded Nut Will Not Turn Allowing The Belt.
Hand Screw The Adjusting Screw To Take Up Any Slack In Tool.
This Movement Will Allow The Belt To Lose Adjustment.
Features
- When torquing down the axle nut after the proper belt tension has been set (deflection), the welded axle nut will move to the low side of adjuster cam
- This movement will allow the belt to lose adjustment
- Place this tool over the welded nut on left side with the neck portion of tool resting over the swingarm
- Hand screw the adjusting screw to take up any slack in tool
- Torque the axle nut from the right side knowing that the welded nut will not turn allowing the belt
- See more on Amazon...
Brand: Jims USA | Manufacturer: JIMS
Dimensions: 3.30 x 9.70 x 4.30 inches | Weight: 0.03 pounds
See On Amazon #5
Jims USA Black Forceflow Cylinder Head Cooler
Asin: B007ZUGIK4 | Ean: 0630931582247 | UPC: 630931582247
Application: 99-12 Twin Cam.
Jim's Machining Forceflow 5401..
Primary Color= Black.
Features
- Street American Big Twin > ENGINE > Engine Other > Forceflow
- Primary Color= Black
- Application: 99-12 TWIN CAM
- Jim's Machining Forceflow 5401.
- See more on Amazon...
Brand: Jims USA | Manufacturer: JIMS
Dimensions: 7.00 x 12.00 x 12.00 inches | Weight: 4.80 pounds
See On Amazon #6
Jims USA Transmission Case Shifter Shaft Seal Installer
Asin: B0068FVC12 | Ean: 0748264418178 | UPC: 748264418178
They Align, Center And Install The Shifter Seal To The Right Depth.
Use To Install H-D# 12045.
Makes Installing The Shifter Shaft Seal Precise And Effortless.
Features
- Developed in conjunction with Hiro Koiso, one of JIMS sponsored Bonneville racers
- Makes installing the shifter shaft seal precise and effortless
- They align, center and install the shifter seal to the right depth
- Use to install H-D# 12045
- See more on Amazon...
Brand: Jims USA | Manufacturer: JIMS
Dimensions: 0.50 x 5.00 x 1.00 inches | Weight: 0.40 pounds
See On Amazon #7
Jims Exhaust Gasket Installer Tool 788
Asin: B0041Q0Z7M | Model: LEPAZA58640 | PartNumber: LEPAZA58640 | Ean: 0747103913799 | UPC: 747103913799
Brand: Jims USA | Manufacturer: JIMS
Dimensions: 1.00 x 5.00 x 3.00 Inches | Weight: 0.05 pounds
See On Amazon #8
Jims USA Tappet Oil Screen Plug Tool
Asin: B000GZJS1Q | Model: TRTD7402 | PartNumber: TRTD7402 | Ean: 0748264479490 | UPC: 748264479490
Brand: Jims USA | Manufacturer: Jims
Dimensions: 0.50 x 0.50 x 0.50 inches | Weight: 0.20 pounds
See On Amazon #9
Jims USA Primary Bearing Upgrade
Asin: B0040I5SHI | Ean: 6903202379865
Made In The Usa.
Fits H-D Any 5 Or Aftermarket 6-Speeds Using H-D Bearing No.9135 (Capatiable With Bandit Clutch Kits)..
Perfect For An Open Primary System Or For Added Durability In A Highoutput System.
Features
- Double row ball bearing with seal and retaining ring kit
- Perfect for an open primary system or for added durability in a highoutput system
- Made in the USA
- fits H-D any 5 or aftermarket 6-speeds using H-D bearing No.9135 (capatiable with Bandit clutch kits).
- See more on Amazon...
Brand: Jims USA | Manufacturer: JIMS
Dimensions: 2.10 x 5.00 x 4.80 inches | Weight: 0.60 pounds
See On Amazon #10
Jim'S Machining Cruise Drive Main Case Seal Installer 786 461015
Asin: B0068FVDV6 | Ean: 0748264418239 | UPC: 748264418239
Jim's Machining 786..
Application: 06-12 Dyna, 07-12 Big Twin.
Features
- Street American V-Twin > SHOP > Tools
- Application: 06-12 DYNA, 07-12 BIG TWIN
- Jim's Machining 786.
- See more on Amazon...
Brand: Jims USA | Manufacturer: Jim's Machining
Dimensions: 4.20 x 9.00 x 4.20 inches | Weight: 6.50 pounds
See On Amazon #11
Jims Primary Locking Bar 2318
Asin: B000LQLCL4 | Model: LEPAZA7027 | PartNumber: LEPAZA7027
Brand: Jims USA | Manufacturer: JIMS
Dimensions: 0.50 x 5.30 x 3.00 inches
See On Amazon #12
Jims Manual Compression Release Valves 727K
Asin: B000GUWO26 | Model: LEPAZA26978 | PartNumber: LEPAZA26978 | Ean: 0747103679145 | UPC: 747103679145
Sold In Pairs.
Made In The Usa.
Simple Drill And Tap (10Mm X 1Mm) Each Cylinder Head And Thread In The Self-Sealing Release Valves (Thread Tap Sold Seperately).
Features
- Give your starter a hand by installing these in your high-compression, big-inch motor
- Simple drill and tap (10mm x 1mm) each cylinder head and thread in the self-sealing release valves (thread tap sold seperately)
- Sold in pairs
- Made in the USA
- See more on Amazon...
Brand: Jims USA | Manufacturer: JIMS
Dimensions: 7.00 x 1.00 x 5.00 inches | Weight: 0.05 pounds
See On Amazon #13
Jims USA Bearing Installer/Remover Tool
Asin: B071VJ4LK8 | Model: 967-4 | PartNumber: 967-4 | Ean: 0747103643306 | UPC: 747103643306
First Available: 06/03/2023
Brand: Jims USA | Manufacturer: Jims USA
Dimensions: 4.50 x 8.00 x 4.50 inches | Weight: 0.60 pounds
Warranty: Manufacturer Warranty
See On Amazon #14
Jims USA Timken Case Bearing Conversion Tool
Asin: B000OZYNA4 | Ean: 0747103500937 | UPC: 747103500937
Brand: Jims USA | Manufacturer: Jims
Dimensions: 5.00 x 14.00 x 5.00 inches | Weight: 14.90 Pounds
See On Amazon #15
Jims Primary Locking Bar 2316
Asin: B006B25C5E | Model: 2316 | PartNumber: 2316 | Ean: 0667302618014 | UPC: 667302618014
First Available: 06/03/2023
Brand: Jims USA | Manufacturer: Jims USA
Dimensions: 0.50 x 10.00 x 3.00 inches | Weight: 0.88 pounds
Warranty: Manufacturer Warranty
See On Amazon #16
Jims USA Piston Ring Compressor Kit
Asin: B0040I5ST6 | Model: 8542063374 | PartNumber: 8542063374 | Ean: 0667302707398 | UPC: 667302707398
Made In The Usa.
Features
- Easy-to-use set covers pistons with an outside diameter of 1.875in.-2.875in.
- Made in the USA
- See more on Amazon...
Brand: Jims USA | Manufacturer: Jims
Dimensions: 1.00 x 9.00 x 7.00 inches | Weight: 1.40 pounds
See On Amazon #17
Jims USA Sprocket Shaft Seal Installtion Tool
Asin: B07HF81QZ5 | Ean: 0644978365244 | UPC: 644978365244
Driver Handle Sold Separately.
Holds Seal Perfectly Square.
Features
- Installs sprocket seal to proper depth
- Holds seal perfectly square
- Driver handle sold separately
- See more on Amazon...
Brand: Jims USA | Manufacturer: Jims
Dimensions: 3.00 x 7.00 x 4.00 inches | Weight: 1.00 pounds
See On Amazon #18
Jims USA Transmission Door Bearings
Asin: B000GTY75E | Ean: 0182682073197 | UPC: 182682073197
Replaces Oem #8998.
Sold In Pairs.
Brand: Jims USA | Manufacturer: JIMS
Dimensions: 1.00 x 4.00 x 3.00 inches | Weight: 0.50 Pounds
See On Amazon #19
Jims Timken Bearing or Race Installer Adapter Kit 973
Asin: B000P017DE | Ean: 6903202799380
Upgrade Jims #97225-55 Bearing Installer To Work On The Latest Spline Twin Cam Sprocket Shafts.
Designed To Either Install H-D #8028 Timken Bearing Or The Roller Bearing Race Assembly H-D #24004-43 Onto The Sprocket Shaft.
Adapter Kit.
Features
- Installs sprocket shaft bearing and pulls lower end into left fits Case
- Adapter Kit
- Upgrade Jims #97225-55 bearing installer to work on the latest spline Twin Cam sprocket shafts
- Designed to either install H-D #8028 Timken bearing or the roller bearing race assembly H-D #24004-43 onto the sprocket shaft
- See more on Amazon...
Brand: Jims USA | Manufacturer: Jims
Dimensions: 1.00 x 4.50 x 3.00 inches | Weight: 0.80 Pounds
See On Amazon #20
Jims USA Clutch Spring Compressor Adapter
Asin: B071RXKFXH | Model: 4333033813 | PartNumber: 4333033813
Made In The Usa.
Brand: Jims USA | Manufacturer: Jims
Dimensions: 0.50 x 2.00 x 0.50 inches | Weight: 0.50 pounds
See On Amazon #21
Jims Primary Locking Bars 2317
Asin: B00230NMYG | Model: 2317 | PartNumber: 2317 | Ean: 0748264479513 | UPC: 748264479513
First Available: 06/23/2023
Brand: Jims USA | Manufacturer: Jims USA
Dimensions: 0.50 x 10.00 x 3.00 inches | Weight: 0.81 pounds
Warranty: Manufacturer Warranty
See On Amazon #22
Jims Dipstick Socket 759
Asin: B005KLR4JO | Model: LEPAZA56440 | PartNumber: LEPAZA56440
Features Include A Square Hole For 3/8In. Ratchet Fitment, 7/8In. Hex For Wrench Fitment And A Cutout For Clearance Around The Exhaust Pipe.
Manufacturers Lifetime Warranty.
Made In Usa From Non-Marring Black Made With Delrin, Ensuring Strength, Durability And Heat Resistance.
Not Only Protects Your Hands From The Heat But Aids Riders With Limited Hand Strength In Easily Checking Their Oil Level.
Features
- Allows riders and mechanics to quickly and safely remove the engine oil level dipstick that lies precariously close to a scorching hot exhaust pipe
- Not only protects your hands from the heat but aids riders with limited hand strength in easily checking their oil level
- Features include a square hole for 3/8in. ratchet fitment, 7/8in. hex for wrench fitment and a cutout for clearance around the exhaust pipe
- Made in USA from non-marring black made with Delrin, ensuring strength, durability and heat resistance
- Manufacturers lifetime warranty
- See more on Amazon...
Brand: Jims USA | Manufacturer: Jim's Machining
Dimensions: 1.00 x 4.00 x 3.00 Inches | Weight: 0.20 pounds
See On Amazon #23
Jims Machining Valve Spring Compressor
Asin: B00GNA9BW4 | Model: TRTC11608 | PartNumber: TRTC11608
Jim's Machining 96600-36B..
Application: Xl Up To '03, Buell Up To 2002.
Features
- Street American V-Twin > SHOP > Tools
- Application: XL UP TO '03, BUELL UP TO 2002
- Jim's Machining 96600-36B.
- See more on Amazon...
Brand: Jims USA | Manufacturer: JIMS
Dimensions: 2.60 x 12.00 x 9.00 inches | Weight: 4.50 pounds
See On Amazon #24
Jims Pushrod Cover Clip Installing and Remover Tool 917
Asin: B0041Q0ZEK | Model: 5864223613 | PartNumber: 5864223613 | Ean: 6903202635855
Constructed Of Tough Black Made With Delrin.
Made In The Usa.
For Use On All V-Twins That Use Pushrod Clips.
Installs/Removes Clip Professionally With Just One Hand In Seconds.
Features
- Wont mar or slip
- Installs/removes clip professionally with just one hand in seconds
- Constructed of tough black made with Delrin
- For use on all V-twins that use pushrod clips
- Made in the USA
- See more on Amazon...
Brand: Jims USA | Manufacturer: JIMS
Dimensions: 2.00 x 7.20 x 2.00 inches | Weight: 0.06 pounds
See On Amazon #25
Jims USA Pinion Gear Locking Tool
Asin: B000GU0MGQ | Model: LEPAZA75446 | PartNumber: LEPAZA75446 | Ean: 0633835198873 | UPC: 633835198873
Use Bikers Choice Tool To Tighten Pinion Nut.
Can Also Be Used On Aftermarket And S&S Motors.
Tool Is Simple To Use, Align Underneath Gear And Screw Into Fits Case.
Features
- Use to lock pinion gear, necessary to torque the pinion nut
- Tool is simple to use, align underneath gear and screw into fits Case
- Use Bikers Choice tool to tighten pinion nut
- Can also be used on aftermarket and S&S motors
- See more on Amazon...
Brand: Jims USA | Manufacturer: Jims
Dimensions: 0.10 x 4.50 x 2.00 inches | Weight: 0.40 pounds
See On Amazon #26
Jims USA Thread Chaser Tap Set Tool Sae
Asin: B001P4CJYU | Ean: 0633835944562 | UPC: 633835944562
Zinc-Plated Steel Construction.
Made In The Usa.
Not For Cutting New Threads.
Includes Coarse Sizes 1/4-20, 5/16-18, 3/8-16, 7/16-14, 1/2-13 And 9/16-12.
Features
- An inexpensive way to clean up threads on frames or other parts that have been powder-coated or painted
- Includes coarse sizes 1/4-20, 5/16-18, 3/8-16, 7/16-14, 1/2-13 and 9/16-12
- Zinc-plated steel construction
- Not for cutting new threads
- Made in the USA
- See more on Amazon...
Brand: Jims USA | Manufacturer: Jims
Dimensions: 0.86 x 6.06 x 5.35 inches | Weight: 0.50 Pounds
See On Amazon #27
Jims USA Wrist Pin Bushing Reamer Tool
Asin: B000GZQVXE | Model: 1726-3 | PartNumber: 1726-3 | Ean: 0747103501897 | UPC: 747103501897
First Available: 06/23/2023
Brand: Jims USA | Manufacturer: Jims USA
Dimensions: 2.00 x 7.00 x 4.00 inches | Weight: 1.00 pounds
Warranty: Manufacturer Warranty
See On Amazon #28
Jim's Machining Tappet Roller Repair Kit Chrome-Moly Axle 18534-29A
Asin: B000N444EG | Model: 18534-29A | PartNumber: 18534-29A | Ean: 0748264490105 | UPC: 748264490105
First Available: 11/06/2022
Brand: Jims USA | Manufacturer: JIMS®
Dimensions: 0.10 x 4.00 x 2.80 inches | Weight: 0.05 pounds
Warranty: Manufacturer
See On Amazon