KAGAUOAS - Buying Guide
Last Updated: 05/08/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
KAGAUOAS FH-168 Car Audio System of Speaker Polarity Tester Phase Meter Phasemeter (NO Battery)
Asin: B0CHTVPLXB
Fh-168 Car Audio System Of Speaker Polarity Tester Phase Meter Phasemeter.
Color: Black.
Size: 108 X 70 X 25Mm./ Approx.(4.25 X 2.71 X 0.98 Inch).
Perfect For Safely Troubleshooting And Testing Audio Systems..
Features
- This phase meter can test all speakers of all car, such as small treble, door speakers, subwoofer, etc.
- Perfect for safely troubleshooting and testing audio systems.
- FH-168 Car Audio System Of Speaker Polarity Tester Phase Meter Phasemeter
- Size: 108 x 70 x 25mm./ approx.(4.25 x 2.71 x 0.98 inch)
- Color: Black
- See more on Amazon...
Brand: KAGAUOAS | Manufacturer: KAGAUOAS
See On Amazon #2
DDR4 DIMM Memory Self-Checking Tester Card, CR2032 Battery with LED Indicators and USB Type C Cable for Desktop Computer DDR4 Memory Fault Test Board (Short Latch)
Asin: B0CMPJP6RC
3. Led Indicators: Led Indicators Are Used To Test All Data Lines Of The Memory, And The Normal Brightness Is Regarded As Normal. When A Hardware Fault Occurs In The Loop Of These Data Lines, Bright Or No Light Is Abnormal..
5.Easy To Use: Insert The Cr2032 Battery Into(Battery Not Included) The Battery Holder Of The Test Card, Or Connect The Type C Cable , And Then Insert The Memory Card To Test..
4.Uses: If The Test Indicator Flashes, It Means That The Gold Pin Is In Poor Contact. If There Is No Indicator Light, It Means That The Hardware Has An Open Circuit Failure. Check The Wear Of The Gold Pin, Whether The Exclusion Is Damaged, And Whether The Pcb Is Disconnected..
2.Computer Memory Failures: The Failures Of Computer Memory Are Mainly Due To Poor Contact Of The Gold Pins, Wear And Tear Of The Gold Pins, Broken Pcbs, Damage To The Data Line Exclusion, Open And Short Circuits In The Video Memory, And Poor Memory Performance, Etc..
Features
- 1.Applicable Scene: Desktop computer DDR4 memory Fault test card is suitable for desktop computer DDR4 memory.
- 2.Computer Memory Failures: The failures of computer memory are mainly due to poor contact of the gold pins, wear and tear of the gold pins, broken PCBs, damage to the data line exclusion, open and short circuits in the video memory, and poor memory performance, etc.
- 3. LED Indicators: LED indicators are used to test all data lines of the memory, and the normal brightness is regarded as normal. When a hardware fault occurs in the loop of these data lines, bright or no light is abnormal.
- 4.Uses: If the test indicator flashes, it means that the gold pin is in poor contact. If there is no indicator light, it means that the hardware has an open circuit failure. Check the wear of the gold pin, whether the exclusion is damaged, and whether the PCB is disconnected.
- 5.Easy To Use: Insert the CR2032 battery into(Battery not included) the battery holder of the test card, or connect the type C cable , and then insert the memory card to test.
- See more on Amazon...
Brand: KAGAUOAS | Manufacturer: KAGAUOAS
Dimensions: 0.79 x 5.91 x 2.76 inches
Warranty: NO
See On Amazon #3
KAGAUOAS 70 * 50 * 6mm Brass CPU Contact Frame, CPU Bending Correction Fixing Buckle, LGA 1700 Retrofit Kit, 17XX-BCF Bracket for Intel12/13th CPU with L-Shaped Screwdriver
Asin: B0CNG7DLNX
Fully For Intel12 Generation Lga1700 Cpu, Chipset Is H610,B660,Z690 Series..
Package Include 2G Tf7 Thermal Paste And L Type Screwdriver..
Installation And Protect Your Cpu Cover Well. Package Include Tf7 Thermal Paste(12.8 W/Mk) And L Type Screwdriver..
Brass Cnc-Anode Sandblasting Process.
Features
- This product provides support for intel12th 13th gen- CPU, for the mootherboard socket Lga1700 1800
- Brass CNC-anode sandblasting process
- Fully for Intel12 Generation LGA1700 CPU, chipset is H610,B660,Z690 series.
- installation and protect your CPU cover well. Package include TF7 thermal paste(12.8 W/Mk) and L Type Screwdriver.
- Package include 2g TF7 thermal paste and L Type Screwdriver.
- See more on Amazon...
Brand: KAGAUOAS | Manufacturer: XLW
See On Amazon #4
NVME M-Key M.2 PCIE 4.0 Adapter, 2230 to 2280 SSD Hard Drive Expansion Board for Rog Ally Handheld Conversion
Asin: B0CPR9VG8X
3. The Expansion Board Also Features High-Quality Manufacturing Process And Materials, Which Can Provide Stable And Reliable Performance And Bring Users A Better Experience. Color: Green 90 Degree Short Board, Item Size: 3.3X2.4X0.4Cm..
4. It Should Be Noted That The Use Of This Expansion Board Card Requires A Certain Degree Of Technical And Operational Skills, It Is Recommended To Install And Use Under The Guidance Of Professionals..
2. The 2280 Ssd Hard Disk To Be Replaced Into The Adapter Board, Ready For The Operation Of The System Cloning. 2, Rog Ally Boot Into The System, Connect The Hard Disk, And Open Diskgenius, Use The "System Migration" Function Will Be The Original Hard Disk System Disk Cloning To The New Hard Disk..
Features
- 1. This is an expansion board for ROG ALLY smart handheld to upgrade 2230 size M.2 SSD drive to 2280 size NVME M-Key M.2 PCIE 4.0 SSD drive. The expansion board features a 90-degree green design to better fit the body of the ROG ALLY Smart Pocket PC, while providing higher transfer speeds and larger storage capacity to meet users' needs for high-speed, high-capacity storage.
- 2. The 2280 SSD hard disk to be replaced into the adapter board, ready for the operation of the system cloning. 2, rog ally boot into the system, connect the hard disk, and open DiskGenius, use the system migration function will be the original hard disk system disk cloning to the new hard disk.
- 3. The expansion board also features high-quality manufacturing process and materials, which can provide stable and reliable performance and bring users a better experience. Color: Green 90 degree short board, Item size: 3.3x2.4x0.4cm.
- 4. It should be noted that the use of this expansion board card requires a certain degree of technical and operational skills, it is recommended to install and use under the guidance of professionals.
- See more on Amazon...
Brand: KAGAUOAS | Manufacturer: ZYX
Warranty: NO
See On Amazon #5
New Version M.2 NGFF E-Key to E- Key Adapter Card for AX200/201/210 WiFi Card, with LED Power Indicator Light
Asin: B0CL7RVTLW
Support 2230/2242/2260/2280 Type M.2 Card Dimension, Such As Intel Ax200/201/210 Wifi Card.
Fuse Design For More Stability And Safe..
Installation Requirement: Key E/ 2230 Type M.2 Card Dimension.
Features
- Allows user to use standard M.2 E-Key WiFi card to E- Key interface.
- Installation requirement: key E/ 2230 type M.2 Card dimension
- Support 2230/2242/2260/2280 type M.2 Card dimension, such as Intel AX200/201/210 WIFI card
- Fuse design for more stability and safe.
- See more on Amazon...
Brand: KAGAUOAS | Manufacturer: KAGAUOAS
Warranty: NO
See On Amazon #6
KAGAUOAS Upgrade Version M.2 NGFF A+E Key WiF/BT Card to M.2 Key M Adapter Card for Intel AX200/AX201/AX210
Asin: B0CPR4MS1X
3.Pcie X1 And Usb2.0 Signal Interface. Include A Usb 2Pin-To-2Pin Cable For Usb 2.0 Signal From Pc To Usb 2Pin Header..
5.No Driver Installation Is Required. 100% Os-Transparent Hardware Bridge Converter To Support Windows, Mac And Linux..
4.This Adapter Is Suitable For Intel Ax200/Ax201/Ax210/8260/8265/9260.
2. Support 2230/3030 M.2 E Key And A-E Key Wif, Bt And Dual Band Wireless Module..
Features
- 1.Convert a M.2 E Key or A-E Key module (such as WiF-BT, or Dual Band Wireless Module, etc.) to be used in a computer with M Key M.2 Socket.- Note: This is only an M.2 adapter and does not include other modules.
- 2. Support 2230/3030 M.2 E Key and A-E Key WiF, BT and Dual Band Wireless Module.
- 3.PCIe x1 and USB2.0 signal interface. Include a USB 2Pin-to-2Pin Cable for USB 2.0 signal from PC to USB 2pin header.
- 4.This adapter is suitable for Intel AX200/AX201/AX210/8260/8265/9260
- 5.No driver installation is required. 100% OS-transparent hardware bridge converter to support Windows, MAC and Linux.
- See more on Amazon...
Brand: KAGAUOAS | Manufacturer: ZYX
Warranty: NO
See On Amazon #7
PCI Express PCI-E 1X to 1X/4x/8x/16x Riser Card Extender with Magnetic Foot Pads and USB 3.0 Cable
Asin: B0CZ8L8PQM
3. Dustproof Cap And Golden Finger Protection Cover Design..
5. Usb 3.0 Cable Length: 58Cm.
4. 12V, 5V And3.3V Led Indicator Design.
2. With 3X Solid Capacitors, Making Sure Power Supply More Stable And Secure.
Features
- 1. Supports high speed PCI-E1x/4x/8x/ 16X card
- 2. With 3x solid capacitors, making sure power supply more stable and secure
- 3. Dustproof cap and golden finger protection cover design.
- 4. 12v, 5v and3.3v LED indicator design
- 5. USB 3.0 cable length: 58cm
- See more on Amazon...
Brand: KAGAUOAS | Manufacturer: ZYX
Warranty: NO
See On Amazon #8
SFF-8639 U.2 to NGFF M.2 M-Key PCIe SSD Case Enclosure for SSD 750 p3600 p3700
Asin: B0CZ8KQMBH
3. Supports M.2 Ngff Modules In Format 2280, 2260, 2242 And 2230 With Key M, Maximum Height Of The Components On The Module: 1.5 Mm, Application Of Double-Sided Assembled Modules Supported..
5. It Does Not Work For Key B Sata Port..
4. System Requirements: Windows 8/8-64/8.1/8.1-64/10/10-64, Linux Kernel 3.16 ,A Free U.2 Sff-8639 Interface Or A Free Sff-8643 Interface.
2. Need M-Key Or Nvme Ssd, The B-Key Or B/M-Key Ssd Cannot Work. The Converter Can Be Installed Into Your System Internally Through The U.2(Sff-8639) Interface..
Features
- 1. SFF-8639 U.2 to NGFF M.2 M-key PCI-e SSD Adapter for Mainboard Replace Inte SSD 750 p3600 p3700, With Black Case Enclosure, This converter enables the connection of a M.2 NGFF SSD in 2280, 2260, 2242 and 2230 format.
- 2. Need M-key or NVME SSD, the B-key or B/M-key SSD cannot work. The converter can be installed into your system internally through the U.2(SFF-8639) interface.
- 3. Supports M.2 NGFF modules in format 2280, 2260, 2242 and 2230 with key M, Maximum height of the components on the module: 1.5 mm, application of double-sided assembled modules supported.
- 4. System requirements: Windows 8/8-64/8.1/8.1-64/10/10-64, Linux Kernel 3.16 ,A free U.2 SFF-8639 interface or A free SFF-8643 interface
- 5. It does not work for key B SATA port.
- See more on Amazon...
Brand: KAGAUOAS | Manufacturer: ZYX
Warranty: NO
See On Amazon #9
Dual M.2(NGFF) SSD to Dual SATA3 Adapter, Supports M.2 2230/2242/2260 Type SSD for Desktop Computer
Asin: B0CZ8DSDD9
3. Supports M.2 Key B Sata-Bus Ssd To Sata3, This Adapter Is Not Suitable For Nvme Pci-E Bus Ssd..
5. Supports Windows 7/8/10, Windows Server 2008/2010/2012 Or Linux..
4. Supports M.2 2230/2242/2260 Type Ssd..
2. Allows User To Use Standard M.2 Ssd To Sata Hard Drive In The Desktop..
Features
- 1. The dual NGFF SSDs can work at same time
- 2. Allows user to use standard M.2 SSD to SATA hard drive in the Desktop.
- 3. Supports M.2 key B SATA-bus SSD to SATA3, this adapter is not suitable for nvme PCI-E bus SSD.
- 4. Supports M.2 2230/2242/2260 type SSD.
- 5. Supports Windows 7/8/10, Windows server 2008/2010/2012 or Linux.
- See more on Amazon...
Brand: KAGAUOAS | Manufacturer: zyx
Warranty: NO
See On Amazon #10
Dual Msata SSD to Dual SATA3 Adapter,Supports 25x30mm and 50x30mm msata SSD to SATA3 / 6Gbps Mass Storage Interface.
Asin: B0CZ7TN77S
3. Support Hi-Speed Sata3 / 6Gbps Mass Storage Interface..
5. Supports Windows 7/8/10, Windows Server 2008/2010/2012 Or Linux..
4. Supports Half-Size(25X30mm) And Full- Size(50X30mm) Msata Ssd To Sata3..
2. Allows User To Use Standard Sata-Io Msata Ssd To Sata Hard Drive In The Desktop..
Features
- 1. The dual mSATA SSDs can work at same time.
- 2. Allows user to use standard SATA-IO mSATA SSD to SATA hard drive in the Desktop.
- 3. Support Hi-Speed SATA3 / 6Gbps mass storage interface.
- 4. Supports half-size(25x30mm) and full- size(50x30mm) msata SSD to SATA3.
- 5. Supports Windows 7/8/10, Windows server 2008/2010/2012 or Linux.
- See more on Amazon...
Brand: KAGAUOAS | Manufacturer: ZYX
Warranty: NO
See On Amazon #11
M.2 to 2.5 inch SATA Enclosure Adapter - Converter NGFF M.2 B Key Based SSD to SATA III Hard Drive - Supports 2230 2242 2260 2280 - 7mm Case
Asin: B0CZ7RH1D7
3.Support 22*30Mm/22*42Mm/22*60Mm/22*80Mm All Size Of M.2 Ngff (Sata) Ssd..
5. Material: Aluminum Shell, Size:100*70Mm (3.93*2.75 In).
4.Do Not Support M.2 Key M Pci-E Bus Ssd..
2. Support Sata I/Ii/Iii (Up To 6Gbps). Compatible With Both Laptop And Desktop, Plug And Play, No Driver Required..
Features
- 1. Convert a M.2 NGFF (SATA Channel) SSD into a standard 2.5 inch SATA Hard Disk Drive.
- 2. Support SATA I/II/III (up to 6Gbps). Compatible with both laptop and desktop, Plug and play, no driver required.
- 3.Support 22*30mm/22*42mm/22*60mm/22*80mm all size of M.2 NGFF (SATA) SSD.
- 4.Do not support M.2 Key M PCI-E Bus SSD.
- 5. Material: Aluminum shell, Size:100*70mm (3.93*2.75 in)
- See more on Amazon...
Brand: KAGAUOAS | Manufacturer: ZYX
Warranty: NO
See On Amazon #12
DDR5 U-DIMM 288Pin Adapter DDR5 Memory Test Protection Card, Expansion Board Card for Desktop PC Computer (with Short Latch)
Asin: B0CZ7PD3RM | Model: With short Latch | PartNumber: With short Latch
3. Suitable For Ddr5 U-Dimm Memory Card Of Desktop Pc..
5. Color: Green . Size: 145X38mm(5.7X1.5 In).
4. No Additional Driver Is Needed..
2. Design 4-Layers Pcb Design For Reducing The Signal Loss And Emi..
Features
- 1. The purpose of this product is to protect the gold fingers of the DDR5 memory module from wear and tear during the testing process
- 2. Design 4-Layers PCB design for reducing the signal loss and EMI.
- 3. Suitable for DDR5 U-DIMM memory card of desktop PC.
- 4. No additional driver is needed.
- 5. Color: Green . Size: 145x38mm(5.7x1.5 in)
- See more on Amazon...
Brand: KAGAUOAS | Manufacturer: ZYX
Warranty: NO
See On Amazon #13
2in1 M.2 NVME PCI-E / NGFF SATA SSD to U.2 SFF-8639 Combo Adapter with Aluminum casing
Asin: B0CZ7NY2S3
3. For Mainboard Replace Ssd 750 P3600 P3700 . Application Of Double-Sided Assembled Modules Supported.
5. Nvme U.2 Sff-8639 Male & Dual 67 Pin M.2 Ngff Slot To Combo Ngff M.2 M-Key Sata Pci-E Ssd Adapter.
4. System Requirements :Windows 10, Linux Kernel 3.16 And A Free U.2 Sff-8639 Interface.
2. Can Be Installed Into The System Internally Through The Sata Express Interface Or Through The U.2 (Sff-8639) Interface..
Features
- 1. SFF-8639 U.2 to NGFF M.2 M-key PCI-e SSD Adapter for Mainboard Replace Intel SSD 750 p3600 p3700, With Black Case Enclosure, This converter enables the connection of a Supports M.2 modules in format 2280, 2260, 2242 and 2230 with key B or key B+M based on SATA or PCI-e .
- 2. Can be installed into the system internally through the SATA Express interface or through the U.2 (SFF-8639) interface.
- 3. for Mainboard Replace SSD 750 p3600 p3700 . application of double-sided assembled modules supported
- 4. System requirements :Windows 10, Linux Kernel 3.16 and A free U.2 SFF-8639 interface
- 5. NVME U.2 SFF-8639 Male & Dual 67 pin M.2 NGFF slot to Combo NGFF M.2 M-key SATA PCI-e SSD Adapter
- See more on Amazon...
Brand: KAGAUOAS | Manufacturer: ZYX
Warranty: NO
See On Amazon #14
New M.2(NGFF) NVME M-Key SSD Adapter for Lenovo Legion Go Handheld Conversion 2242 to 2280 SSD Hard Drive Expansion High Capacity Board
Asin: B0CZ7RYMZ3
3. The Extension Board Is Made Of High Quality Anti Blocking Board Material And Sinking Gold Manufacturing Process, Which Is Stable And Reliable Performance And Brings Better Using Experience For Customers..
5. 1Replace The 2230 2242 2260 2280 Ssd Onto The Gold Finger Adapter Board First To Prepare For The System Cloning Operation. 5.2. Open The System To Connect The Hard Disk And Use The "System Migration" Function To Clone The System Disk Of The Original Hard Disk To The New Hard Disk..
4. It Should Be Noted That The Use Of This Expansion Board Requires Certain Technical And Operational Skills, It Is Recommended To Install And Use Under The Guidance Of Professionals. (Please Note: It Is Recommended To Use 2Mm Ssd Hard Disk, If You Use Ssd Hard Disk With Thickness More Than 2Mm, Please Sand Down The 2 Raised Positions Inside The Red Circle On The Back Cover Appropriately. (Please Refer To The Connection Schematic)..
2. This Expansion Board For Legion Go Handhelds Upgrades A 2242 Form Factor M.2 Ssd To A 2242 2260 2280 Form Factor Nvme M-Key M.2 Pcie 4.0 Ssd. The Expansion Board Is Designed In A Submerged Black Color To Fit Perfectly On The Legion Go Handheld, While Providing Higher Transfer Speeds And Larger Storage Capacity To Meet Users' High Speed And High Capacity Storage Needs..
Features
- 1. Converts 2242 to 2242 2260 2280 SSD Hard Drive Expansion High Capacity Board for Lenovo Legion Go Handhelds NVME M-Key M.2 PCIE 4.0 Gold Finger Adapter Converter Handheld Internal Accessories Black.
- 2. This expansion board for Legion Go handhelds upgrades a 2242 form factor M.2 SSD to a 2242 2260 2280 form factor NVME M-Key M.2 PCIE 4.0 SSD. The expansion board is designed in a submerged black color to fit perfectly on the Legion Go handheld, while providing higher transfer speeds and larger storage capacity to meet users' high speed and high capacity storage needs.
- 3. The extension board is made of high quality anti blocking board material and sinking gold manufacturing process, which is stable and reliable performance and brings better using experience for customers.
- 4. It should be noted that the use of this expansion board requires certain technical and operational skills, it is recommended to install and use under the guidance of professionals. (Please note: It is recommended to use 2mm SSD hard disk, if you use SSD hard disk with thickness more than 2mm, please sand down the 2 raised positions inside the red circle on the back cover appropriately. (Please refer to the connection schematic).
- 5. 1Replace the 2230 2242 2260 2280 SSD onto the gold finger adapter board first to prepare for the system cloning operation. 5.2. Open the system to connect the hard disk and use the System Migration function to clone the system disk of the original hard disk to the new hard disk.
- See more on Amazon...
Brand: KAGAUOAS | Manufacturer: ZYX
Warranty: NO
See On Amazon #15
New 2400W ATX 17x 6Pin PSU Power Supply Breakout Board Adapter for Ethereum 7001606-J000 7001606-J000 BTC Mining
Asin: B0CZ7NNQ32 | Model: ATX60P17-N09 | PartNumber: ATX60P17-N09
17 Pcie Ports, For 6Pin Connectors.
On-Board Led Voltage Meter Display.
Confirmed Power Supply Compatibility List : For Emerson Brand: 7001606-J000/J002(Ibm P/N:94Y8117) For Artesyn Brand: 7001606-J000/J002(P/N:94Y8195).
Maximum Support Up To 120Amp / 2400Watts.
Features
- ATX 17x 6Pin Power Supply Breakout Board Adapter Converter
- Maximum Support up to 120Amp / 2400Watts
- 17 PCIe ports, for 6pin connectors
- Confirmed Power Supply Compatibility List : For EMERSON brand: 7001606-J000/J002(IBM P/N:94Y8117) For ARTESYN brand: 7001606-J000/J002(P/N:94Y8195)
- On-board LED voltage meter display
- See more on Amazon...
Brand: KAGAUOAS | Manufacturer: ZYX
Dimensions: 0.79 x 3.54 x 3.54 inches
Warranty: NO
See On Amazon #16
KAGAUOAS 64PIN PSU Power Supply Terminal Board with Adjustable Voltage Knob and 3.3v/5v/12v /USB 2.0/QC 2.0/3.0/12v for HP/Delta/FUJITSU/LITEON PSU Power
Asin: B0CSF3466V
3. 5V: For Raspberry Pi, Banana Pi, Tinker Board, Nano Pi, Usb Interface, Etc..
5. This Adapter Is Only Suitable For The Following Model Of Power Supply:Dps-800Gb A /Dps-1200Fb A /Dps-1200Qb A / Ps-2751-5Q / Ps-2751-Lf-1F / Hstsn-Pl12 / Dps-700Lb D / Ps-2112-5L / Dps-750Rb A , For Fujitsu Brand: Dps-800Gb-5A/ Dps-800Gb-3A..
4. Compatible With 9V: Arduino, Motor Drive, Display Driver Module, Etc. 12V: Motor Drive, Led Light, Vehicle Equipment With Power Requirements Less Than 24W, Etc..
2. Compatible With 3.3V: Stm32 Mcu, Network Communication Equipment, Such As Wi/Fi Bt And Other Devices, Generally For Microcontrollers, And Some Low-Power Modules, Etc..
Features
- 1. This power supply breakout board, with ADJ adjustable voltage knob, supports 3.3V, 5V, 12V and 1.8V-10.8V (ADJ) output voltage.
- 2. Compatible with 3.3V: STM32 MCU, network communication equipment, such as Wi/Fi BT and other devices, generally for microcontrollers, and some low-power modules, etc.
- 3. 5V: For Raspberry Pi, Banana Pi, Tinker Board, Nano Pi, USB interface, etc.
- 4. Compatible with 9V: Arduino, motor drive, display driver module, etc. 12V: motor drive, LED light, vehicle equipment with power requirements less than 24w, etc.
- 5. This adapter is only suitable for the following model of power supply:DPS-800GB A /DPS-1200FB A /DPS-1200QB A / PS-2751-5Q / PS-2751-LF-1F / HSTSN-PL12 / DPS-700LB D / PS-2112-5L / DPS-750RB A , For FUJITSU brand: DPS-800GB-5A/ DPS-800GB-3A.
- See more on Amazon...
Brand: KAGAUOAS | Manufacturer: ZYX
See On Amazon #17
ATX 24PIN to USB Power HUB Supply Breakout Board and Acrylic Case Kit with 3.3V, 5V, 12V Output Voltage and 12 Ports USB, 3A Maximum Output
Asin: B0CSF2ND2C
3. At The Same Time, The Panel Is Also Equipped With An Acrylic Case Kit For Easy To Use..
5.Compatible With 12V Display Driver Module, : Motor Drive, Led Light, Vehicle Equipment With Power Requirements.
4.Compatible With 3.3V: Stm32 Mcu, Network Communication Equipment, Such As Wi/Fi Bt And Other Devices, Generally For Microcontrollers, And Some Low-Power Modules, Etc. 5V: For Raspberry Pi, Banana Pi, Tinker Board, Nano Pi, Usb Interface, Etc..
2.The Voltage Output Terminals Of The Atx Power Expansion Board Correspond To Each Screw Terminal..
Features
- 1.ATX power supply breakout board supports 3.3V, 5V, 12V output voltage.
- 2.The voltage output terminals of the ATX power expansion board correspond to each screw terminal.
- 3. At the same time, the panel is also equipped with an acrylic case kit for easy to use.
- 4.Compatible with 3.3V: STM32 MCU, network communication equipment, such as Wi/Fi BT and other devices, generally for microcontrollers, and some low-power modules, etc. 5V: For Raspberry Pi, Banana Pi, Tinker Board, Nano Pi, USB interface, etc.
- 5.Compatible with 12V display driver module, : motor drive, LED light, vehicle equipment with power requirements
- See more on Amazon...
Brand: KAGAUOAS | Manufacturer: ZYX
See On Amazon #18
ATX 18+12pin Slot Power Supply Breakout Board with Adjustable Voltage Knob and 3.3v/5v/12v /USB 2.0/QC 2.0/3.0/12v for Dell D750E-S1 /D110E-S0 PSU Power Terminal Board
Asin: B0CSF29T6N
3. 4 Usb 2.0 Ports Design, Supports Qc 2.0/Qc 3.0..
5. Compatible With 9V: Arduino, Motor Drive, Display Driver Module, Etc. 12V: Motor Drive, Led Light, Vehicle Equipment With Power Requirements Less Than 24W, Etc..
4. Compatible With 3.3V: Stm32 Mcu, Network Communication Equipment, Such As Wi-Fi / Bt And Other Devices, Generally For Microcontrollers, And Some Low-Power Modules, Etc. 5V: For Raspberry Pi, Banana Pi, Tinker Board, Nano Pi, Usb Interface, Etc..
2. This Power Supply Breakout Board, With Adj Adjustable Voltage Knob, Supports 3.3V, 5V, 12V And 1.8V-10.8V (Adj) Output Voltage..
Features
- 1.Product Name: Power Supply Breakout Board for Dell brand PSU.
- 2. This power supply breakout board, with ADJ adjustable voltage knob, supports 3.3V, 5V, 12V and 1.8V-10.8V (ADJ) output voltage.
- 3. 4 USB 2.0 ports design, supports QC 2.0/QC 3.0.
- 4. Compatible with 3.3V: STM32 MCU, network communication equipment, such as Wi-Fi / BT and other devices, generally for microcontrollers, and some low-power modules, etc. 5V: For Raspberry Pi, Banana Pi, Tinker Board, Nano Pi, USB interface, etc.
- 5. Compatible with 9V: Arduino, motor drive, display driver module, etc. 12V: motor drive, LED light, vehicle equipment with power requirements less than 24w, etc.
- See more on Amazon...
Brand: KAGAUOAS | Manufacturer: ZYX
Warranty: NO
See On Amazon #19
New 2 in 1 Combo Msata/M.2(NGFF) SSD to Dual SATA3 Adapter
Asin: B0CSF1J8FS | Model: A1253 | PartNumber: A1253
3. Supports Half-Size(25X30mm) And Full- Size(50X30mm) Msata Ssd To Sata3..
4. Supports Only M.2 2230/2242 Type Ssd..
2. Supports M.2 Key B Sata-Bus Ssd To Sata3, This Adapter Is Not Suitable For Nvme Pci-E Bus Ssd..
Features
- 1. The MSATA and NGFF SSD can work at same time.
- 2. Supports M.2 key B SATA-bus SSD to SATA3, this adapter is not suitable for nvme PCI-E bus SSD.
- 3. Supports half-size(25x30mm) and full- size(50x30mm) msata SSD to SATA3.
- 4. Supports only M.2 2230/2242 type SSD.
- See more on Amazon...
Brand: KAGAUOAS | Manufacturer: ZYX
Dimensions: 0.08 x 2.76 x 1.77 inches
See On Amazon #20
2 in1 Mini PCI-E to PCI-E 1x and MSATA to SATA3 Adapter with SIM Card Slot for WFi/ 3G/4G/LTE/Msata SSD
Asin: B0CSDY524K
3. Supports Full /Half -Mini Card Dimension..
5. With Sim/Uim Card Slot, You To Use 3G/4G Module Directly When Sim Card Installed..
4. Supports Msata Ssd Convert To Sata ..
2. Supports All Of Mini-Cards Such As 3G,Cdma, Wlan,Wwlan,Lte, Wfi, Mini Card To Desktop Pc..
Features
- 1.This adapter does not include 3G/4G/ WFi card and Msata SSD.
- 2. Supports all of Mini-Cards such as 3G,CDMA, WLAN,WWLAN,LTE, WFi, Mini Card to desktop PC.
- 3. Supports full /half -Mini Card dimension.
- 4. Supports MSATA SSD convert to SATA .
- 5. With SIM/UIM card slot, you to use 3G/4G module directly when SIM card installed.
- See more on Amazon...
Brand: KAGAUOAS | Manufacturer: ZYX
Warranty: NO
See On Amazon #21
KAGAUOAS USB Type-B to RS232/485/422/TTL Converter with CP2102 Chip, Isolated USB Adapter with Multiple Protection, Support Multi Devices and Android, Windows 11/10 / 8.1/8 / 7, Etc System
Asin: B0CPRSTQLY
Supports Multiple Communication Interface Conversion: Usb To Rs232, Usb To Rs485, Usb To Rs422, Usb To Ttl.
Onboard Ttl Serial 3.3V/5V Voltage Translator, Config The Ttl Level Via Switch.
Onboard Unibody Power Supply Isolation, Provides Stable Isolated Voltage, Needs No Extra Power Supply For The Isolated Terminal.
Adopt Original Cp2102 Chip, Fast Communicating, Stable And Reliable, Better Compatibility.
Features
- Industrial Grade Isolated USB Converter --USB TO RS232/485/422/TTL. Original CP2102 | Stable Transmission | Multiple Devices Applicable | Multi-OS Compatible.
- Adopt original CP2102 chip, fast communicating, stable and reliable, better compatibility
- Supports multiple communication interface conversion: USB to RS232, USB to RS485, USB to RS422, USB to TTL
- Onboard unibody power supply isolation, provides stable isolated voltage, needs no extra power supply for the isolated terminal
- Onboard TTL serial 3.3V/5V voltage translator, config the TTL level via switch
- See more on Amazon...
Brand: KAGAUOAS | Manufacturer: ZYX
See On Amazon #22
Dual M.2 B Key/B&M Key SSD to 2.5" SATA III with Frame Bracket - Retain mSATA SSD as 7mm 2.5" SATA Drive
Asin: B0CPRSCGGD
Support 4 Sizes Ngff M.2 Socket Ssd: Type 2230/ 2242/ 2260/ 22X80.
Led Indicates Power Status.
Transparent To The Operating System And Does Not Require Any Software Drivers.
Don’T Support Jbod Mode And Ssd1 And Ssd2 Can Not Work At The Same Time..
Features
- Support NGFF M.2 Key B SATA-bus SSD
- Don t support JBOD mode and SSD1 and SSD2 can not work at the same time.
- Support 4 sizes NGFF M.2 Socket SSD: type 2230/ 2242/ 2260/ 22x80
- Transparent to the operating system and does not require any software drivers
- LED indicates power status
- See more on Amazon...
Brand: KAGAUOAS | Manufacturer: ZYX
Warranty: NO
See On Amazon #23
Dual Msata SSD to 2.5" SATA III with Frame Bracket - Retain mSATA SSD as 7mm 2.5" SATA Adapter for PC
Asin: B0CPRR2NBQ | Model: SATA3 | PartNumber: SATA3
Led Indicates Power Status.
Support Hi-Speed Sata3/ 6Gbps Mass Storage Interface..
Don’T Support Jbod Mode And Ssd1 And Ssd2 Can Not Work At The Same Time.Note: This Is An Adapter Only, No Other Modules Are Included..
Transparent To The Operating System And Does Not Require Any Software Drivers.
Features
- Support only full- size msata SSD.
- Transparent to the operating system and does not require any software drivers
- LED indicates power status
- Don t support JBOD mode and SSD1 and SSD2 can not work at the same time.Note: This is an adapter only, no other modules are included.
- Support Hi-Speed SATA3/ 6Gbps mass storage interface.
- See more on Amazon...
Brand: KAGAUOAS | Manufacturer: ZYX
Dimensions: 0.79 x 3.94 x 2.76 inches
See On Amazon #24
NVME M-Key 2230mm to 2280mm Angled Extension SSD Adapter for ROG Ally Gaming
Asin: B0CPRKGLP2
3. Please Put New 2280 Ssd Into The Ssd Box, Clone The System, Then Replace The Original 2230 Ssd..
5. It’S An Extremely Easy Process That Will Only Take You About 20 Minutes To Do, And Once You’Re Done You Can Enjoy Up To 8Tb Of Space..
4. If You Have Just Collected Your Ally Handheld Games Console And Would Like To Expand Its Storage Or Have Found Yourself Running Out Of Space For Your Library Of Games..
2. The Compatible With Rog Ally Gaming 2230 Nvme To 2280 Nvme Extension, It Can't Convert Nvme To Sata, Also Can't Convert Sata To Nvme..
Features
- 1. We have managed to squeeze a full-fat 2280 M.2 SSD inside the new ROG Ally with our PCI-Express 4.0 x4 adapter.
- 2. The Compatible with ROG Ally Gaming 2230 NVME to 2280 NVME extension, It can't convert NVME to SATA, also can't convert SATA to NVME.
- 3. Please put new 2280 SSD into the SSD box, Clone the system, Then replace the original 2230 SSD.
- 4. If you have just collected your Ally handheld games console and would like to expand its storage or have found yourself running out of space for your library of games.
- 5. It s an extremely easy process that will only take you about 20 minutes to do, and once you re done you can enjoy up to 8TB of space.
- See more on Amazon...
Brand: KAGAUOAS | Manufacturer: ZYX
Warranty: NO
See On Amazon #25
M.2 NGFF to SATA Adapter Card, NGFF M2 to 2.5 Inch SATA III Drivers for NGFF M.2 2280 2260 2242 2230 SSD (Not for M.2 NVME)
Asin: B0CPRBCYG9
3 .Support M2 Ssd 2280 / 2260 / 2242 / 2230Mm M.2 Ngff(Sata) Ssd, And Sata 3 Interface With Max Transfer Rate Up To 6Gbps..
5. Easy Installation And No Driver Required..
4. Adopt Large Capacity Capacitance, High Power Ldo Control Chip, Ensure More Stable Performance, And Enjoy Faster Transmission..
2.Not Support Any Pcie Nvme / Ahci Key M Ssd. If You Have A Brand New Ssd, Please Format The Ssd Before Use. Otherwise, It May Not Be Recognized By The Computer..
Features
- 1.Easily convert NGFF SATA Key B / B+M SSD to a external 7+15 pin solid state drive card, add extra storage space for your laptop and desktop.
- 2.Not support any PCIe NVMe / AHCI Key M SSD. If you have a brand new SSD, please format the SSD before use. Otherwise, it may not be recognized by the computer.
- 3 .Support M2 SSD 2280 / 2260 / 2242 / 2230mm M.2 NGFF(SATA) SSD, and SATA 3 interface with max transfer rate up to 6Gbps.
- 4. Adopt large capacity capacitance, high power LDO Control chip, ensure more stable performance, and enjoy faster transmission.
- 5. Easy installation and no driver required.
- See more on Amazon...
Brand: KAGAUOAS | Manufacturer: ZYX
Warranty: NO
See On Amazon #26
KAGAUOAS PCIE 4.0 Extension Cable, 180 Black 16X 64GB/S Speed GPU Riser Cable with PCI Express Port for GPU Extension Card, for RTX4090 and All gen 4 GPUs, RTX3090ti (30CM)
Asin: B0CPRB1V8H
3. With Segmented Design, This Gpu Riser Cable Allows For Airflow, Making It Easy To Reduce Operating Temperature And Improve Overall System Performance..
5. Compatible With Most Gpu/Motherboard Components And Fits Most Cases. Supports Pcie 4.0/3.0/2.0/1.0, Compatible With Rtx4090 And All Gen 4 Gpus, Rtx3090ti, Rtx3090, Rtx3080ti, Rtx3080, Rtx3070ti, Rtx3070, Rtx3060ti, Rtx3060, Rx6950xt, Rx6900xt, Rx6800xt, Rx6800, Rx6700xt, Rx6600xt, Rx6500xt / Chipset - X570, B550, Z590, Z690..
4. Plug And Play, No Bios Setup Required. Featuring A Unique Cable Protector That Effectively Enhances The Durability Of The Extender As Well As Prevents Cable Damage, Even If The Extender Is Folded Or Twisted, This Gpu Extension Cable Provides The Best Connectivity And Lifespan..
2. Imported Silver-Plated Cable With Up To 64Gbs, In Line With Pcie 4.0 Transmission Standard And Remains Backward Compatible With A Maximum Transfer Speed. Enhanced 12V Power Supply With 12Pin Silver-Plated Cable Delivers 12V To Meet The Needs Of 4090 High-Power Graphics Cards..
Features
- 1. PCI-E 4.0 riser cable design high quality hand-soldered gold pin, allowing for maximum conductivity and ensure signal integrity. Using imported cables with pure copper tinned cores, this power cable extension gives you full-speed, stable and almost attenuation-free signal transmission.
- 2. Imported silver-plated cable with up to 64GBS, in line with PCIE 4.0 transmission standard and remains backward compatible with a maximum transfer speed. Enhanced 12V power supply with 12PIN silver-plated cable delivers 12V to meet the needs of 4090 high-power graphics cards.
- 3. With segmented design, this GPU riser cable allows for airflow, making it easy to reduce operating temperature and improve overall system performance.
- 4. Plug and play, no BIOS setup required. Featuring a unique cable protector that effectively enhances the durability of the extender as well as prevents cable damage, even if the extender is folded or twisted, this GPU extension cable provides the best connectivity and lifespan.
- 5. Compatible with most GPU/motherboard components and fits most cases. Supports PCIE 4.0/3.0/2.0/1.0, compatible with RTX4090 and all gen 4 GPUs, RTX3090ti, RTX3090, RTX3080ti, RTX3080, RTX3070ti, RTX3070, RTX3060ti, RTX3060, RX6950XT, RX6900XT, RX6800XT, RX6800, RX6700XT, RX6600XT, RX6500XT / Chipset - x570, B550, Z590, Z690.
- See more on Amazon...
Brand: KAGAUOAS | Manufacturer: KAUAUOAS
See On Amazon #27
ATX 24PIN Power Supply Breakout Board LED Voltage Display with 12- Port USB 2.0 and QC 2.0/3.0 and 12V Output - Purple
Asin: B0CPR252RT
3. The Voltage Output Terminals Of The Atx Power Expansion Board Correspond To Screw Terminal..
Size:96*65Mm.
4. At The Same Time, The Panel Is Also Equipped With An Acrylic Case Kit For Easy To Use..
2. 12-Port Usb 2.0 Ports Design, Supports Qc 2.0/Qc 3.0..
Features
- 1.ATX power supply breakout board, with 5V and 12V output voltage, 3 digit LED displays 12 V voltage output at real time.
- 2. 12-port USB 2.0 ports design, supports QC 2.0/QC 3.0.
- 3. The voltage output terminals of the ATX power expansion board correspond to screw terminal.
- 4. At the same time, the panel is also equipped with an acrylic case kit for easy to use.
- SIZE:96*65mm
- See more on Amazon...
Brand: KAGAUOAS | Manufacturer: ZYX
See On Amazon #28
PCIE 4.0 Extension Shielded Cable, Black 90 Degree 16x 64GB/S GPU Riser Cable with PCI Express Port for GPU Extension Card for RTX4090 RTX3080 (30CM)
Asin: B0CPQZHRQ8
3.With Segmented Design, This Gpu Riser Cable Allows For Airflow, Making It Easy To Reduce Operating Temperature And Improve Overall System Performance..
5.Compatible With Most Gpu/Motherboard Components And Fits Most Cases. Supports Pcie 4.0/3.0/2.0/1.0, Compatible With Rtx4090 And All Gen 4 Gpus, Rtx3090ti, Rtx3090, Rtx3080ti, Rtx3080, Rtx3070ti, Rtx3070, Rtx3060ti, Rtx3060, Rx6950xt, Rx6900xt, Rx6800xt, Rx6800, Rx6700xt, Rx6600xt, Rx6500xt / Chipset - X570, B550, Z590,.
4.Plug And Play, No Bios Setup Required. Featuring A Unique Cable Protector That Effectively Enhances The Durability Of The Extender As Well As Prevents Cable Damage, Even If The Extender Is Folded Or Twisted, This Gpu Extension Cable Provides The Best Connectivity And Lifespan..
2.Imported Silver-Plated Cable With Up To 64Gbs, In Line With Pcie 4.0 Transmission Standard And Remains Backward Compatible With A Maximum Transfer Speed. Enhanced 12V Power Supply With 12Pin Silver-Plated Cable Delivers 12V To Meet The Needs Of 4090 High-Power Graphics Cards..
Features
- 1.PCI-E 4.0 riser cable design high quality hand-soldered gold pin, allowing for maximum conductivity and ensure signal integrity. Using imported cables with pure copper tinned cores, this power cable extension gives you full-speed, stable and almost attenuation-free signal transmission.
- 2.Imported silver-plated cable with up to 64GBS, in line with PCIE 4.0 transmission standard and remains backward compatible with a maximum transfer speed. Enhanced 12V power supply with 12PIN silver-plated cable delivers 12V to meet the needs of 4090 high-power graphics cards.
- 3.With segmented design, this GPU riser cable allows for airflow, making it easy to reduce operating temperature and improve overall system performance.
- 4.Plug and play, no BIOS setup required. Featuring a unique cable protector that effectively enhances the durability of the extender as well as prevents cable damage, even if the extender is folded or twisted, this GPU extension cable provides the best connectivity and lifespan.
- 5.Compatible with most GPU/motherboard components and fits most cases. Supports PCIE 4.0/3.0/2.0/1.0, compatible with RTX4090 and all gen 4 GPUs, RTX3090ti, RTX3090, RTX3080ti, RTX3080, RTX3070ti, RTX3070, RTX3060ti, RTX3060, RX6950XT, RX6900XT, RX6800XT, RX6800, RX6700XT, RX6600XT, RX6500XT / Chipset - x570, B550, Z590,
- See more on Amazon...
Brand: KAGAUOAS | Manufacturer: ZYX
See On Amazon #29
MSATA to M.2(NGFF) Key B Adapter for 2230/2242 SSD Card
Asin: B0CPQZC5MF
3.Compliant With Multi-System Of Pc, Supports Any Os, Like Windowsxp/7/8/10, Wince & Linux Etc.
Size:50*30Mm.
4..High Quality Connectors For Long Service Life And Reliability..
2.Support Full-Size Mini Card(22X30 / 22X42)..
Features
- 1.Support only 2230/2242 type Key B SATA -Bus M.2 card.
- 2.Support full-size Mini card(22x30 / 22x42).
- 3.Compliant with multi-system of PC, Supports any OS, like WindowsXP/7/8/10, WinCE & Linux etc
- 4..High quality connectors for long service life and reliability.
- Size:50*30mm
- See more on Amazon...
Brand: KAGAUOAS | Manufacturer: ZYX
Warranty: NO
See On Amazon #30
M.2(NGFF) Key A+E to PCI-E 1X 4X 8X 16X Adapter+ 5v/12v 4PIN Power Input
Asin: B0CPQY9JV3
3. As Pci Express X1 Connector Design Is Edge-Free, So Supports Pci-Express 1X, X4, X8 And X16 Pcie Card..
5.Use External 5V/12V Power Supply For Pci-E Card..
4.Compliant With Multi-System Of Pc, Supports Any Os, Like Windowsxp/7/8/10, Wince & Linux Etc.
2.Support Only 2230 Type Key A/E/A+E Pci-E Bus M.2 Card..
Features
- 1.This adapter allows you to use your PCI-E card to convert M.2 key A+E interface .
- 2.Support only 2230 type Key A/E/A+E PCI-E Bus M.2 card.
- 3. As PCI Express x1 connector design is edge-free, So supports PCI-Express 1x, x4, x8 and x16 PCIe Card.
- 4.Compliant with multi-system of PC, Supports any OS, like WindowsXP/7/8/10, WinCE & Linux etc
- 5.Use external 5V/12V power supply for PCI-e card.
- See more on Amazon...
Brand: KAGAUOAS | Manufacturer: ZYX
Warranty: NO
See On Amazon