LoveRPi - Buying Guide

Bestselling from LoveRPi on Amazon

1. LoveRPi Power-Over-Ethernet (PoE) HAT for Raspberry Pi 4 Model B and Raspberry Pi 3 Model B+ (Profes...
2. Raspberry Pi PoE+ HAT with Low Profile Heatsink
3. Libre Computer Le Potato Mini Single Board Computer with USB WiFi 4 and Heatsink (2GB WiFi 4, Libre Blue)
4. LoveRPi MicroUSB Push On Off Power Switch Cable for Raspberry Pi (Female to Male)
5. Libre Computer Le Potato AML-S905X-CC SBC Complete Starter Kit (None, WiFi 4)
6. LoveRPi Performance Heatsink Set for Raspberry Pi 3 B+
7. LoveRPi Active Cooling Media Center PC Case with Fan for Raspberry Pi 3 Model B+, Libre Computer Boa...
8. LoveRPi Professional PoE HAT with PWM Fan Controller for Raspberry Pi 4
9. Libre Computer Le Potato AML-S905X-CC SBC Complete Starter Kit (None, WiFi 5 BT)
10. LoveRPi Active Cooling Media Center Case for Libre Computer Sweet Potato Solitude Alta
11. Libre Computer Tritium Mini Single Board Computer with USB WiFi and Heatsink (1 Pack, Red WiFi 4)

Features

• ULTIMATE POWER OVER ETHERNET HAT FOR RASPBERRY PI 4: Deliver clean and reliable power to the latest Pi 4! Power-over-Ethernet is both simple, power efficient, and cost effective compared to having multiple power adapters. PoE power output must be within the budget of the switch when powering multiple boards. PoE switch and Raspberry Pi 4 Model B sold separately.
• GALVANICALLY ISOLATED POWER OVER ETHERNET UP TO 3KV: Designed for IEEE 802.3af, IEEE 802.3at, and Passive DC 48V network switches and power sourcing equipment (PSE). The professional model features galvanic isolation for applications with non-IEEE 802.3 compliant switches and power injectors that do not provide PSE side isolation.
• BUILT FOR CLUSTER NODES: Simplify cable management and expand your on-premise cloud with POE! Power five, ten, twenty Raspberry Pi 4 Model B boards through a single POE switch. This PoE HAT was designed to exceed the power delivery standards set by the official Raspberry Pi PoE HAT and other products available on the market.
• VENTILATED CASE WITH COOLING FAN HIGHLY RECOMMENDED: Do not use this product in an enclosed case without active air circulation. Airflow around the HAT and Raspberry Pi 4 Model B must be adequate to ensure performance and stable operation.
• EASY INSTALLATION AND BACKWARDS COMPATIBLE: Please remove all non-essential heatsinks including RAM/USB/Ethernet heatsink before seating the HAT! Supports the latest Raspberry Pi 4 as well as the Raspberry Pi 3 Model B+.
• See more on Amazon...

Features

• 2021 POE+ HAT FOR PI 4: Designed for the powerful Raspberry Pi 4, the Raspberry Pi PoE+ HAT delivers up to 20W of power from IEEE 802.3AT PoE+ compliant switches so that your Pi 4 never runs out of juice.
• POWER USB 3.0 DEVICES: Two USB 3.0 Type A ports on the Raspberry Pi 4 can deliver up to 1A each. The original PoE HAT could not supply enough current for demanding USB 3.0 devices like backup drives, 4K webcams, and more.
• QUIET CONFIGURABLE FAN: Equipped with a powerful 25mm x 25mm brushless fan, the PoE+ HAT can operate up to 50 C ambient temperature with adequate airflow. With cooler ambient temperatures or low load, the fan will reduce speed for silent operation.
• OPTIMIZED FOR REMOTE: Power over Ethernet provides single cable power and connectivity to the Raspberry Pi 4. Ideal for reducing cable runs, acting as access point (AP), remote sensing and acquisition, the PoE+ HAT further expands already incredible capabilities and processing power.
• LOW PROFILE HEATSINK INCLUDED: Further reduce temperatures by increasing the thermal surface area of the powerful SoC with advanced 3M thermal transfer tape. Remove the blue plastic and adhere the low profile heatsink to the main chip to reduce temperatures and increase speed.
• See more on Amazon...

Features

• AML-S905X-CC WITH HEATSINK AND WIFI: Le Potato is a powerful SBC platform capable of handling many computing tasks while consuming less than a watt. This bundle adds a bespoke heatsink and plug and play WiFi dongle for getting the most from your board.
• BESPOKE ANODIZED HEATSINK: The anodized heatsink provides a protective oxide layer that resists environmental corrosion while offering significantly better thermal performance. Dramatically increase sustained performance while increasing reliability via reduced temperature cycling. Two push pin anchors securely attach heatsink for vibration resistance.
• PLUG AND PLAY USB WIFI: Get a no-hassle WiFi dongle that offers great performance and feature set including AP mode, ad-hoc mode, monitor mode, packet injection, and more. It is fully integrated into the Linux kernel and is perfect for embedded applications that require low power consumption, memory usage, and software support.
• ADDITIONAL PERIPHERALS REQUIRED: MicroSD card or eMMC flashed with the correct image. Proper bootloader or image is required to have HDMI video output. The green LED will turn on once the bootloader is detected. Please use a 5V 2A or higher MicroUSB power supply. Power supplies with insufficient power will experience voltage drops that cause instability and random application crashes or boot issues. For additional assistance, please use hub.libre.computer for guides and end-user support.
• PERIPHERAL COMPATIBILITY: Most USB based peripherals are directly supported. The GPIO header maintains the same layout for hardware I2C, SPI, PWM, and UART compatibility. I2S, PCM, and SDIO do not share the same pins so most audio peripherals will need to be re-routed. Le Potato features additional GPIOs and SARADC pins on separate headers.
• RASPBIAN COMPATIBILITY: Software made for Raspberry Pi is not compatible out of the box. Libre Computer provides the libretech-raspbian-portability tool on GitHub to convert existing Raspbian images to standard EFI images so that they can run on Libre Computer boards. Pre-converted Raspbian images are also available. Non-standard software libraries for interfacing with hardware will need to be updated since GPIO numbering are not the same across different platforms.
• SUPPORT OPEN-SOURCE: Libre Computer is a major sponsor of software contributions to upstream Linux and U-Boot including support for adopted Allwinner, Amlogic, and Rockchip SoCs. For technical support, please use hub.libre.computer.
• See more on Amazon...

Features

• MicroUSB Female to Male Push Power Switch for Raspberry Pi 3 / 2 / B+ / A+ / 0 Designed by LoveRPi
• One Push On/Off Power with Dramatically Reduces Wear and Tear on Sensitive MicroUSB Connectors
• Dual Insulated 18 AWG Oxygen Free Copper Cable, 65% Lower Resistance and 100% Higher Current vs 22AWG
• Smallest Voltage/Current Drop, Use Power Suppy Capable of 4.95V at the Amperage Desired, LoveRPi MicroUSB Power Adapter B01F1LVZ0G is Certified with this Switch for use with Single Board Computers
• Status LED Models: B01LY18SBS B01LY18WCP, USB to MicroUSB with Status LED Models: B01LWQDENY B01LZNL45K
• See more on Amazon...

Features

• LATEST SOFTWARE SUPPORT: Libre Computer provides the latest Ubuntu 23.04 and 22.04 LTS along with Debian 12/Raspbian 11 support with hardware-accelerated video playback and 3D graphics. Upstream software stack featuring the latest Linux 6.x with open source graphics and video libraries. Boards images features standardized bootloaders with UEFI support and behaves similar to a standard computer.
• HIGH PERFORMANCE LOW POWER: AML-S905X-CC performs faster than a Pi 3 B+ while using half the power. It is designed with power optimizations to increase sustained performance under load and reduce failures due to input voltage and current. It is one of the first SBCs to support 4K multi-codec hardware decoding and features a highly performant OpenGL ES 2.0 GPU for accelerated 2D/3D.
• FASTER CPU AND DOUBLE THE MEMORY: Quad 64-bit 1.5GHz ARM Cortex-A53 Processors, 4K Ultra HD ARM Mali-450 750MHz GPU, 2GB of High Bandwidth DDR3, 4K 60FPS High Dynamic Range Display Engine for H.265 HEVC, H.264 AVC, VP9 Hardware Decoding and more. The top performing SBC in its price class.
• HARDWARE EXTENSIBILITY: 40 Pin header enables hardware re-use by maintaining RPi compatible alternate pin functions like SPI, I2C, PWM, UART, and GPIO. Additional design features include ultra high speed (UHS) Micro SD card support, onboard IR, ADC header, eMMC module expansion connector, and more. Form-factor compatible for easy migration from Raspberry Pi 3 designs. See libretech-wiring-tool for more.
• OPEN SOFTWARE STANDARD: Libre Computer platforms run standard ARMv8 (64-bit) code from all major Linux distributions. Pre-compiled open source bootloaders are provided to strap any distribution, Buildroot, or Yocto images for rapid design and deployment. This platform runs standard Linux distribution kernels and an optimized Linux tree is available on GitHub.
• RASPBIAN COMPATIBILITY: Software made for Raspberry Pi is not compatible out of the box. Libre Computer provides the libretech-raspbian-portability tool on GitHub to convert existing Raspbian images to standard EFI images so that they can run on Libre Computer boards. Pre-converted Raspbian images are also available. Non-standard software libraries for interfacing with hardware will not work and will need to be updated.
• SUPPORT OPEN-SOURCE: Libre Computer is a major sponsor of software contributions to upstream Linux and U-Boot including support for adopted Allwinner, Amlogic, and Rockchip SoCs. For technical support, please use hub.libre.computer.
• See more on Amazon...

Features

• EXTREME PERFORMANCE: Straight-fin design with twice the height of other heatsinks for extra heat dissipation performance whether actively or passively cooled. Mandatory for applications in high temperature, sealed, or overclocked applications.
• LONG LASTING EXACT FIT: CPU and LAN chipset heatsinks are fabricated specifically for the Raspberry Pi 3 Model B+ and B. Double-sided 3M thermal transfer tape offers high thermal conductivity and long lasting adhesion in all mounting scenarios.
• QUICK AND SIMPLE INSTALLATION: Peel and stick in the orientation with the most airflow. Most effective solution for reliable performance and longevity. No more messy thermal paste and compatible with LoveRPi Power over Ethernet HAT for Raspberry Pi 3 Model B+.
• NO MORE THROTTLING: Reduce chip hot-spots and increase thermal dissipation surface area by 10x. For Raspberry Pi 3 Model B, cooling amplification for CPU die area is over 100x! Say goodbye to temperature based performance throttling and maintain consistent maximum performance.
• MUST HAVE FOR RASPBERRY PI 3: At full load, BCM2837 SoC will reach 100 C. That is hot enough to boil water! Together with active cooling an active cooling case like the LoveRPi Active Cooling Media Center PC Case, the heatsink will keep temperatures below 20 C above ambient.
• See more on Amazon...

Features

• ULTIMATE PERFORMANCE AND DURABILITY: Exclusively designed for the Raspberry Pi 3 Model B+, Libre Computer Boards, ASUS Tinker Board, and ODROID-C2***, this revolutionary case is built with durable polycarbonate and active cooling fan to provide performance and protection to your SBC.
• INTRICATE FEATURES: We analyzed over 30 cases and created four revisions to build this final case design. It features numerous design elements not found on any other case and takes into account all of the popular single board computers on the market.
• QUICK AND EASY ASSEMBLY: Screw optional design uses numerous latches to secure both the board and the case together. MicroSD card slot is extended to prevent damage allow for easy tool-less removal. GPIO ribbon cable slot enables expansion without sacrificing protection.
• MATTE BLACK WITH FRONT LED AND IR: Sleek matte black design is perfect for media center applications with a clean glossy front cover for LEDs and IR sensors found on Libre Computer Boards and the ODROID-C2. Raspberry Pi 3 requires separate IR receiver (diode + transistor).
• TWO FAN SPEEDS AND SUPPORTS TALL HEATSINKS: Brushless DC fan can be connected to 5V for maximum performance or 3.3V for quiet cooling. Can be used with tall heatsinks up to 12mm for best results.
• See more on Amazon...

Features

• PROFESSIONAL RASPBERRY PI 4 POE HAT: Ideal for all PoE installation, this isolated PoE HAT offers up to 3KV of PD protection with 4-pin PWM fan header and 2-pin 5V header for displays and other accessories.
• FULLY ISOLATED: The professional model features an isolation transformer for IEEE 802.3af/at compliance and generalized DC PoE compatibility in most environments. This greatly reduces the risk of electrical loops and allows the Raspberry Pi to be directly grounded through USB, HDMI, or GPIO header making it suitable for commercial applications in non-controlled environments.
• INTEGRATED PWM FAN CONTROLLER: Based on the EMC2301 SMBus compliant fan controller, this PoE HAT is fully programmable over I2C to control standard 4-pin PWM fans. Set user-space or device-tree based temperature or event triggers for complete fan control from off to maximum RPM. Fan speed tach also provides stall detection, spin-up control, and ramp rate control with 1% accuracy from 500-16K RPM. To enable, add dtoverlay=i2c-fan,emc2301 to /boot/config.txt file.
• VENTILATED CASE WITH FAN HIGHLY RECOMMENDED: Do not use this product in an enclosed case without active air circulation. Airflow around the HAT and Raspberry Pi 4 Model B ensures performance and stable operation.
• EASY INSTALLATION AND BACKWARDS COMPATIBLE: Please remove all non-essential heatsinks including RAM/USB/Ethernet heatsink before seating the HAT! Supports the latest Raspberry Pi 4 as well as the Raspberry Pi 3 Model B+. Align HAT with GPIO and PoE pins and push down. Make sure to fully seat the HAT by checking and removing any obstructions.
• See more on Amazon...

Features

• LATEST SOFTWARE SUPPORT: Libre Computer provides the latest Ubuntu 23.04 and 22.04 LTS along with Debian 12/Raspbian 11 support with hardware-accelerated video playback and 3D graphics. Upstream software stack featuring the latest Linux 6.x with open source graphics and video libraries. Boards images features standardized bootloaders with UEFI support and behaves similar to a standard computer.
• HIGH PERFORMANCE LOW POWER: AML-S905X-CC performs faster than a Pi 3 B+ while using half the power. It is designed with power optimizations to increase sustained performance under load and reduce failures due to input voltage and current. It is one of the first SBCs to support 4K multi-codec hardware decoding and features a highly performant OpenGL ES 2.0 GPU for accelerated 2D/3D.
• FASTER CPU AND DOUBLE THE MEMORY: Quad 64-bit 1.5GHz ARM Cortex-A53 Processors, 4K Ultra HD ARM Mali-450 750MHz GPU, 2GB of High Bandwidth DDR3, 4K 60FPS High Dynamic Range Display Engine for H.265 HEVC, H.264 AVC, VP9 Hardware Decoding and more. The top performing SBC in its price class.
• HARDWARE EXTENSIBILITY: 40 Pin header enables hardware re-use by maintaining RPi compatible alternate pin functions like SPI, I2C, PWM, UART, and GPIO. Additional design features include ultra high speed (UHS) Micro SD card support, onboard IR, ADC header, eMMC module expansion connector, and more. Form-factor compatible for easy migration from Raspberry Pi 3 designs. See libretech-wiring-tool for more.
• OPEN SOFTWARE STANDARD: Libre Computer platforms run standard ARMv8 (64-bit) code from all major Linux distributions. Pre-compiled open source bootloaders are provided to strap any distribution, Buildroot, or Yocto images for rapid design and deployment. This platform runs standard Linux distribution kernels and an optimized Linux tree is available on GitHub.
• RASPBIAN COMPATIBILITY: Software made for Raspberry Pi is not compatible out of the box. Libre Computer provides the libretech-raspbian-portability tool on GitHub to convert existing Raspbian images to standard EFI images so that they can run on Libre Computer boards. Pre-converted Raspbian images are also available. Non-standard software libraries for interfacing with hardware will not work and will need to be updated.
• SUPPORT OPEN-SOURCE: Libre Computer is a major sponsor of software contributions to upstream Linux and U-Boot including support for adopted Allwinner, Amlogic, and Rockchip SoCs. For technical support, please use hub.libre.computer.
• See more on Amazon...

Features

• LATEST SOFTWARE SUPPORT: Libre Computer provides the latest Ubuntu 23.04 and 22.04 LTS along with Debian 12/Raspbian 12 support with hardware-accelerated video playback and 3D graphics. Upstream software stack featuring the latest Linux 6.x with open source graphics and video libraries. Boards images features standardized bootloaders with UEFI support and behaves similar to a standard computer.
• UPSTREAM FREE OPEN SOURCE SOFTWARE: Libre Computer Tritium boards are fully supported by upstream ATF, u-boot, and Linux. It features the highest level of upstream device driver support among all SBCs. All of our platforms are carefully selected to ensure long term software support.
• HARDWARE EXTENSIBILITY: 40 Pin header enables hardware re-use by maintaining RPi compatible alternate pin functions like SPI, I2C, PWM, UART, and GPIO. Additional design features include onboard IR, eMMC 4.x module expansion connector, and more. Form-factor compatible for easy migration from Raspberry Pi 3 designs. See libretech-wiring-tool for more supported peripherals by the GPIO header.
• FASTER CPU AND DOUBLE THE MEMORY: Quad 64-bit 1GHz ARM Cortex-A53 Processors, ARM Mali-450 GPU, 2GB of High Bandwidth DDR3, 4K Video Engine for H.265 HEVC, H.264 AVC, VP9 Decoding and more.
• USB WIRELESS ADAPTER INCLUDED: Libre Computer boards do not feature WiFi or Bluetooth onboard due to performance impact of RF interference. The included GenBasic plug and play USB wireless adapters perform faster due to less interference than onboard solutions.
• SUPPORT OPEN-SOURCE: Libre Computer funds software contributions to upstream Linux and U-Boot for long-term improvements to the open-source ecosystem. Libre Computer also provides professional engineering support staff at hub.libre.computer for technical questions and issues.
• See more on Amazon...

Features

• MOST ADVANCED RASPBERRY PI YET: Raspberry Pi 4 Model B is a significant improvement over the Raspberry Pi 3 Model B+. 3X CPU speed, up to 4X RAM, true Gigabit Ethernet, 2X USB 3.0, Dual 4K MicroHDMI Video, MicroSD UHS, and Bluetooth 5.0 in the same compact size.
• REDESIGNED LAYOUT: While the form factor is still the same, the layout has changed so Raspberry Pi 4 Model B will need a new case. The processor is built on newer 28nm technology but the cores use more power on startup (1A) while peak power (1.5A) is slightly lower than before.
• IMPORTANT CHANGES: Instead of MicroUSB, Raspberry Pi 4 Model B uses USB Type C for power. You can use a MicroUSB to USB Type C adapter if you have a high quality true 2.5A power supply. The HDMI ports are the MicroHDMI variant and not the MiniHDMI variant found on the Raspberry Pi Zero.
• ANODIZED HEATSINKS FOR LONG LASTING PERFORMANCE: With our exclusive heatsink set in non-enclosed passive cooling condition, the Pi 4 can operate at maximum performance for five time longer than without heatsinks or about twice as long as lower profile competitive heatsinks.
• ASSEMBLY WARNING: Only the main SoC disipate enough heat to warrant a heatsink. The LPDDR4 RAM, Ethernet PHY, and WiFi/BT module should not have heatsinks! Putting heatsinks on them poses short-circuit risk and decreases wireless signal quality. Do not use metal cases if you plan to use WiFi or Bluetooth!
• RUGGED ACCESSORIES: High quality design and finish ensures that the accessories will last the life of your Raspberry Pi.
• See more on Amazon...

Features

• DEBUG SERIAL UART CABLE FOR RASPBERRY PI AND OTHER 3.3V SYSTEMS: Instead of guessing problems through a black screen, find out exactly what is going on with your board. Issue commands, grab logs, and debug problems quickly with his convenient USB cable.
• PLUG AND PLAY WITH WINDOWS MAC LINUX: Fire up putty for Windows, Minicom or Screen or Mac and Linux to get direct access when you don't have video or network.
• RASPBERRY PI 3/4 GUIDE: You must open /boot/config.txt or edit config.txt on your MicroSD card and add enable_uart=1 without quotes in order for this to work for Raspberry Pi 3/4 Model B and Model B+. Otherwise UART is not enabled and will not display anything.
• CONNECTING TO 40 PIN HEADER: Three pins need to be connected for UART to work, the black ground (GND) wire, the white RX wire, and the green TX wire. Black should be connected to pin 6, white should be connected to pin 8, and green should be connected to pin 10.
• CONFIGURE BAUD RATE, FLOW CONTROL, PARITY FOR YOUR BOARD: The default baud rate for Raspberry Pi is 115200. Flow control is not supported by the Raspberry Pi 3 so it should be disabled. 8N1 mode must be selected so that there are 8 data bits, no parity, and 1 stop bit.
• See more on Amazon...

Features

• RASPBERRY PI 4 CASE WITH QUIET FAN AND SPEED SELECTION
• See more on Amazon...

Features

• EXTREME PERFORMANCE: Straight-fin design with twice the height of other heatsinks for extra heat dissipation performance whether actively or passively cooled. Mandatory for applications in high temperature, sealed, or overclocked applications.
• LONG LASTING EXACT FIT: CPU and LAN chipset heatsinks are fabricated specifically for the Raspberry Pi 4 Model B. Double-sided thermal transfer tape offers high thermal conductivity and long lasting adhesion in all mounting scenarios.
• QUICK AND SIMPLE INSTALLATION: Peel and stick in the orientation with the most airflow. Most effective solution for reliable performance and longevity. No more messy thermal paste and compatible with LoveRPi Power over Ethernet HAT v2 for Raspberry Pi 4.
• MAXIMUM FREQUENCY FOR LONGER: Maintain 1.5GHz for more than a minute before throttling kicks in. That is 5x longer than without a heatsink. Decrease idle temperatures by 20 F for longer component life and more reliable operation.
• MUST HAVE FOR RASPBERRY PI 4: The SoC and USB 3.0 bridge require heatsinks since they exceed 50 C. Other components like LPDDR4 and gigabit PHY are best passively cooled since they are near components with higher z-height that may short circuit. Please attach the heatsinks as pictured to avoid accidental damage to the Raspberry Pi 4 Model B board.
• See more on Amazon...

Features

• COMPACT RASPBERRY PI 4 POE HAT: Ideal for non-grounded installation, this NON-ISOLATED PoE HAT features optimized footprint. Must be used with a standards compliant IEEE 802.3af PoE or 802.3at PoE+ switch that complies with Section 33.4.1 for power sourcing equipment (PSE) electrical isolation. "Passive PoE" (DC 24V or 48V) is not standards compliant and may cause damage to equipment if connected improperly. Some Ubiquiti switches are not properly isolated and require isolated PoE HATs.
• GROUND LOOPS WARNING: Do not use this device with grounded USB peripherals, HDMI displays, and attachments. Please use the professional PoE model with isolation transformer to prevent electrical loops. In non-controlled PoE applications, ALWAYS use the professional PoE model.
• INTEGRATED PWM FAN CONTROLLER: Based on the EMC2301 SMBus compliant fan controller, this PoE HAT is fully programmable over I2C to control standard 4-pin PWM fans. Set user-space or device-tree based temperature or event triggers for complete fan control from off to maximum RPM. Fan speed tach also provides stall detection, spin-up control, and ramp rate control with 1% accuracy from 500-16K RPM. To enable, add dtoverlay=i2c-fan,emc2301 to /boot/config.txt file.
• VENTILATED CASE WITH FAN HIGHLY RECOMMENDED: Do not use this product in an enclosed case without active air circulation. Airflow around the HAT and Raspberry Pi 4 Model B ensures performance and stable operation.
• EASY INSTALLATION AND BACKWARDS COMPATIBLE: Please remove all non-essential heatsinks including RAM/USB/Ethernet heatsink before seating the HAT! Supports the latest Raspberry Pi 4 as well as the Raspberry Pi 3 Model B+. Align HAT with GPIO and PoE pins and push down. Make sure to fully seat the HAT by checking and removing any obstructions.
• See more on Amazon...

Features

• OPTIMIZED RASPBERRY PI 3 MODEL B+ POWER SUPPLY: Raspberry Pi 3 boards use a lot of current and we have optimized our power supplies to be USB spec compliant for safety while optimizing voltage stability and current delivery.
• QUALITY IN DESIGN: Our cabling are thicker than our competitors and use pure copper for lower voltage drop at high current. Our connectors are gold plated for corrosion resistance and longer usable life. MicroUSB connector clips keep excellent hold to prevent accidental power disconnect.
• MAXIMUM PERFORMANCE WITHOUT VOLTAGE DROP: High quality capacitors and ICs along with thicker cables and connectors enable optimal voltages and smooth current delivery. Your Raspberry Pi board will maintain maximum performance and not throttle to 600MHz in any workload.
• See more on Amazon...

Features

• NOIR CAMERA FOR RASPBERRY PI: Record crystal clear 1080P videos and capture 2592 by 1944 photos with our high performing camera for the Raspberry Pi board family. Equiped with large 1.4 by 1.4 micron sensor pixels, this module is designed for low latency and high quality imaging required for computer vision, streaming media, and remote data acquisition.
• NO IR FILTER: Designed for low light and infrared applications, this camera module captures infrared light for higher contrast in dark environments. When combined with infrared flood lights, this module can provide high resolution footage in complete darkness. Infrared light during day time will affect the hue of the image so this camera is not for accurate color capture during the day.
• AUTOMATIC IMAGE CONTROLS: This module will intelligently adjust white balance, exposure, sensitivity, black levels to optimize for best image quality. Additionally, it has built-in 50Hz/60Hz anti-flickering, lens correction, and defective pixel cancelling functions.
• SIMPLE INSTALLATION FOR ALL PI MODELS: Two FPC cables of different length for Raspberry Pi 4, Pi 3, Pi 2, Pi B+ are included. PFC cable adapter for Raspberry Pi Zero, Pi Zero W, and Pi 0WH are also included. Open a terminal, type in sudo raspi-config, select 5 Interfacing Options, select P1 Camera, select Enable, and then you will be prompted to reboot.
• USER UTILITIES: There are two command-line utility raspistill and raspivid for capture images and videos respectively. There are user-developed open-source GUI applications called PiCameraApp and PiVision available on GitHub. Perfect for Octoprint and other camera applications tailored for the Raspberry Pi.
• See more on Amazon...

Features

• MicroHDMI to HDMI Cable for Raspberry Pi 4: LoveRPi's MicroHDMI to HDMI Male to Male cable enables Ultra HD 4K 60 Frame-per-Second on your Pi 4. Please note the difference between MicroHDMI use for the Pi 4 and MiniHDMI used for the Pi 0.
• Standards Compliant HDMI 2.0 High Speed Spec: Our high quality cable features independent conductors for all 19 pins per the HDMI spec and fully supports HDMI 2.0, 2.0a, and 2.0b features.
• High Bandwidth 18Gbps: 2160p60 4K with High Dynamic Range (10-bit HDR) colors backwards compatible with HDMI 1.4 and HDMI 1.3. Both devices must support the capability and will negotiate lower speed if one side does not support faster speeds or format.
• Additional HDMI Features: HDCP 2.2, Ethernet, 3D, 4K video and Audio Return Channel (ARC)
• Available in Different Length and Multi-Pack: 1M (3 Feet), 2M (6 Feet)
• See more on Amazon...

Features

• RASPBERRY PI 3 MODEL B+: Mini Computer with 1.4GHz Quad Core ARM Cortex-A53, 1GB LPDDR2 RAM, Broadcom VideoCore IV GPU, 4 Full Size USB Ports (Shared Bandwidth), 10/100/1000 Mb Ethernet Port, HDMI 1.3 Port, 3.5mm AV Port (Composite Video Out + Stereo Out), MicroSDHC Slot, MIPI CSI Connector for Cameras, MIPI DSI Connector for Displays, 40 Pin GPIO Header, MicroUSB Power Connector
• TWICE AS FAST AS PI 2: Blazing Fast Quad-Core 64-bit CPU and Faster GPU opens a new realm of possibilities and applications limited only by your creativity
• PREVENT THROTTLING WITH HEATSINKS: Tailored Performance Heatsink Set with 10mm Straight Fin High Profile CPU Heatsink and 5mm LAN Heatsink with 3M Thermal Adhesive Tape
• MAXIMUM POWER: Includes 5V 2.5A MicroUSB Power Adapter for getting the most from your devices and accessories
• ADDITIONAL PARTS REQUIRED: Properly Flashed MicroSD Card required for operation! (8GB B017JKJEAU, 16GB B01J56UIYM, 32GB B01FRLCE32, 64GB B01J56Z8CY, 128GB B01FRLKBQY)
• See more on Amazon...