Mysit - Buying Guide
Last Updated: 04/24/2024
Share on
Bestselling from Mysit on Amazon
- MySit Gas Lift Cylinder Removal Tools 28mm/1.1-Inch, Removal Tools Sets for Replace Office Chair Cyl...
- MySit 2.2" Stroke Office Chair Gas Lift Cylinder Replacement, Heavy Duty 450lbs Shortest Gas Spring ...
- MySit 8" Office Chair Gas Lift Cylinder Replacement Parts, Heavy Duty 450lbs Long Stroke Hydraulic P...
- MySit 7" Heavy Duty Bar Stool Swivel Plate Replacement, Square Swivel Mechanism for Recliner Chair o...
- MySit 16" Folding Shelf Brackets 4 PCS, Max Load 550lb Heavy Duty Stainless Steel DIY Collapsible Wa...
- MySit Heavy Duty 300 LBs Office Chair Tilt Mechanism Replacement Parts, 5.9'' x 8.6" Mounting Holes ...
- MySit Gas Lift Cylinder Removal Tools 33mm/1.3-Inch, Removal Tool Set for Replacing Herman Miller Ae...
- MySit Big Large XL Air Fryer Accessories 8", Set of 9, for Power Airfryer XL Gowise Phillips Cozyna,...
#1
MySit Gas Lift Cylinder Removal Tools 28mm/1.1-Inch, Removal Tools Sets for Replace Office Chair Cylinder, Fix Sinking Office Chair Stainless Steel Chair Saver for Stop Sinking - 2 Pieces
Asin: B0B7QF8T5Y | Model: GasliftNEW-1 | PartNumber: GasliftNEW-1 | Ean: 0760941753624 | UPC: 760941753624
Notice For Cylinder Replacement: 1.Install The Top Ring Collars On Cylinder(Using Short Screws), Make Sure This Ring Can Slide Along The Cylinder; 2.Install The Below Ring Collars On Cylinder(Using Short Screws), Make Sure This Below Ring Tightly Enough And Cannot Slide; 3.Install And Tighten 2 Long Screws On Below Ring Alternately, To Avoid The Below Rings Tilt And Cannot Disassembly..
Fix Sinking Office Chair Use -- Universal Size Fits All Height Adjusting Cylinder Chairs, Office Chair Saver For Stop Sinking Can Control The Height Of The Seat, Prevent Repeated Sinking, The Office Chair Replacement Parts Can Hold Weight Up To 600 Pounds. It Takes Few Minutes Only, Please Adjusting The Height Of The Chair You Need Before Install This Chair Adjustable Saver..
Universal Size 28Mm -- Office Chair Stainless Steel Removal Tool Kit Fits For Most Office Chairs (Stools, Executive Chairs, Office Chairs, Gaming Chairs) With A Cylinder Within 1.1"(28Mm) Diameter..
Replace Gas Lift Cylinder Use -- No Other Tools Required, Using This Tool Set To Remove/Replace Many Years Sinking Gas Cylinder, Let Disassemble Easily To Save Your Strength And Time..
Features
- DURABLE CHAIR CYLINDER REMOVAL TOOLS KIT -- Mysit adjustable office chair cylinder removal tools are made of durable stainless steel. Package inludes 2pcs stainless steel cylinder clamp shafts, 2pcs long bolts, 1pc L wrench.
- REPLACE GAS LIFT CYLINDER USE -- No other tools required, using this tool set to remove/replace many years sinking gas cylinder, let disassemble easily to save your strength and time.
- NOTICE FOR CYLINDER REPLACEMENT: 1.Install the top ring collars on cylinder(using short screws), make sure this ring CAN slide along the cylinder; 2.Install the below ring collars on cylinder(using short screws), make sure this below ring tightly enough and CANNOT slide; 3.Install and tighten 2 long screws on below ring ALTERNATELY, to avoid the below rings tilt and cannot disassembly.
- UNIVERSAL SIZE 28MM -- Office chair stainless steel removal tool kit fits for most office chairs (stools, executive chairs, office chairs, gaming chairs) with a cylinder within 1.1(28mm) diameter.
- FIX SINKING OFFICE CHAIR USE -- Universal size fits all height adjusting cylinder chairs, office chair saver for stop sinking can control the height of the seat, prevent repeated sinking, the office chair replacement parts can hold weight up to 600 pounds. It takes few minutes only, please adjusting the height of the chair you need before install this chair adjustable saver.
- See more on Amazon...
Brand: MySit | Manufacturer: MySit
Dimensions: 0.60 x 2.00 x 2.00 Inches | Weight: 0.82 Pounds
See On Amazon #2
MySit 2.2" Stroke Office Chair Gas Lift Cylinder Replacement, Heavy Duty 450lbs Shortest Gas Spring Rod Chair Part Sinking 2.4 inches Universal Size Black for Short Person,High Chair Base, Class 4
Asin: B0B7QMBCSP | Model: GasliftNEW-6 | PartNumber: GasliftNEW-6 | Ean: 0760941753778 | UPC: 760941753778
Replacement Parts For Office Chair -- Universal Size Replacement For High Chair Base. After Installation, The Cylinder's Bottom To The Chair Base Feet Center Hole Length Is 2.4"(6Cm), So The Legs Height Of The Chair Must Over 2.4"(6Cm), Or It Will Affect The Chairs Moving..
Easy To Install -- You Can Installed Easily Without Additional Screws Required, Fix Your Sinking Office Chair By This Standard Size Replacement Chair Piston Instead Of Purchasing A New Chair..
Heavy Duty 450Lbs Chair Piston -- Mysit Office Chair Gas Lift Cylinder Holds Up To 450Lbs For Most Office Chair, Executive Chair, Computer Chair, Gaming Chair. Full 360 Degree Rotation, Smooth And Without Noise Move To All Directions..
Adjustable Height 2.2 Inch -- Adjustable Height 2.2 Inch, The Fully Expanded Height Is 10.7 Inch, The Fully Compressed Height Is 8.5 Inch, Which Suitable For Short Person ..
Features
- CLASS 4 LEVEL GAS LIFT CYLINDER -- This heavy duty gas lift cylinder made with high construction industry standard (BIFMA Plus Qaulity) for short person or high chair base.
- ADJUSTABLE HEIGHT 2.2 INCH -- Adjustable Height 2.2 Inch, the fully expanded height is 10.7 inch, the fully compressed height is 8.5 inch, which suitable for short person .
- REPLACEMENT PARTS FOR OFFICE CHAIR -- Universal size replacement for high chair base. After installation, the cylinder's bottom to the chair base feet center hole length is 2.4(6cm), so the legs height of the chair must over 2.4(6cm), or it will affect the chairs moving.
- HEAVY DUTY 450LBs CHAIR PISTON -- MySit office chair gas lift cylinder holds up to 450lbs for most office chair, executive chair, computer chair, gaming chair. Full 360 degree rotation, smooth and without noise move to all directions.
- EASY TO INSTALL -- You can installed easily without additional screws required, fix your sinking office chair by this standard size replacement chair piston instead of purchasing a new chair.
- See more on Amazon...
Brand: MySit | Manufacturer: MySit
Dimensions: 2.00 x 8.50 x 2.00 Inches
See On Amazon #3
MySit 8" Office Chair Gas Lift Cylinder Replacement Parts, Heavy Duty 450lbs Long Stroke Hydraulic Pneumatic Shock Piston Universal Size Fits Most Chairs Tall Person, Class 4
Asin: B0BL36PQWV
Heavy Duty 450Lbs Chair Piston -- Mysit Office Chair Gas Lift Cylinder Holds Up To 450Lbs For Most Office Chair, Executive Chair, Computer Chair, Gaming Chair..
Easy To Install -- You Can Installed Easily Without Additional Screws Required, Fix Your Sinking Office Chair By This Standard Size Replacement Chair Piston Instead Of Purchasing A New Chair..
Replacement Parts For Most Office Chair -- Universal Size Replacement For Most Of Office Chair Cylinder, Executive Chairs Cylinder, Full 360 Degree Rotation, Smooth And Without Noise Move To All Directions..
Adjustable Height 8 Inch -- Adjustable Height 8 Inch, The Fully Expanded Height Is 22.5 Inch, The Fully Compressed Height Is 14.5 Inch, Which Suitable For Tall Person..
Features
- CLASS 4 LEVEL GAS LIFT CYLINDER -- This heavy duty gas lift cylinder made with high construction industry standard (BIFMA Plus Qaulity) for heavy and tall person.
- ADJUSTABLE HEIGHT 8 INCH -- Adjustable Height 8 Inch, the fully expanded height is 22.5 inch, the fully compressed height is 14.5 inch, which suitable for tall person.
- HEAVY DUTY 450LBs CHAIR PISTON -- MySit office chair gas lift cylinder holds up to 450lbs for most office chair, executive chair, computer chair, gaming chair.
- REPLACEMENT PARTS FOR MOST OFFICE CHAIR -- Universal size replacement for most of office chair cylinder, executive chairs cylinder, full 360 degree rotation, smooth and without noise move to all directions.
- EASY TO INSTALL -- You can installed easily without additional screws required, fix your sinking office chair by this standard size replacement chair piston instead of purchasing a new chair.
- See more on Amazon...
Brand: MySit | Manufacturer: MySit
Dimensions: 8.00 x 2.00 x 1.10 Inches | Weight: 3.30 Pounds
See On Amazon #4
MySit 7" Heavy Duty Bar Stool Swivel Plate Replacement, Square Swivel Mechanism for Recliner Chair or Furniture - Ball Bearing Swivel Boat Seat
Asin: B01MQDQHOJ | Model: SwivelPlate_7 | PartNumber: SwivelPlate_7 | Ean: 0608408951704 | UPC: 608408951704
Sturdy & Well-Constructive--The Swiveling Barstools Made With High Quality Stainless Solid Steel Ball-Bearing Construction With Black Coating Finished. 2.5Mm Thickness, Much Thicker Than Regular Swivel Plate. The Heavy Duty Bar Stool Swivel Replacement Can Bear Load Capacity About 160-230 Lbs..
Swivel Plate Perfect For Bar Stool--This Swivel Plate Are Perfect Fit For Many Stools, Bar Stools,Chairs And Boat Seat,Kayak Seat,Murphy Bed, Swivel Stand, Ect. Long-Time Service Life, Which Difficult To Deform And Crush With Low Noise..
360 Free & Smoothly Rotation--Using This Bar Stool Swivel Plate With 40-50Pcs Ball Bearings Swivel Much Easy And Smooth. Not Easy To Deform, Have Long Service Life With Smooth Rotation And Low Noise..
Mounting Hole Distance--5.59" (Minmum 137X137mm; Maximum 147X147mm), Hole Size: 7*22Mm; (Mounting Hardware Not Included)..
Features
- BAR STOOL SWIVEL REPLACEMENT--7" X 1" size dimension, 2.5mm thickness.
- MOUNTING HOLE DISTANCE--5.59 (Minmum 137x137mm; Maximum 147x147mm), Hole Size: 7*22mm; (Mounting hardware not included).
- STURDY & WELL-CONSTRUCTIVE--The swiveling barstools made with high quality stainless solid steel ball-bearing construction with black coating finished. 2.5mm thickness, much thicker than regular swivel plate. The heavy duty bar stool swivel replacement can bear load capacity about 160-230 lbs.
- 360 FREE & SMOOTHLY ROTATION--Using this bar stool swivel plate with 40-50pcs ball bearings swivel much easy and smooth. not easy to deform, have long service life with smooth rotation and low noise.
- SWIVEL PLATE PERFECT FOR BAR STOOL--This swivel plate are perfect fit for many stools, bar stools,chairs and boat seat,kayak seat,murphy bed, swivel stand, ect. Long-time service life, which difficult to deform and crush with low noise.
- See more on Amazon...
Brand: MySit | Manufacturer: MySit
Dimensions: 7.00 x 0.87 x 7.00 inches | Weight: 3.10 pounds
See On Amazon #5
MySit 16" Folding Shelf Brackets 4 PCS, Max Load 550lb Heavy Duty Stainless Steel DIY Collapsible Wall Mounted L Shelf Bracket Space Saving for Table Work Bench
Asin: B095739NJ3 | Ean: 0774034307786 | UPC: 774034307786
Sturdy & Durable -- The 16 Inch Folding Shelf Bracket And The Screws Is Made Of Type Premium Stainless Steel. 304 Surface Brushed Treatment Steel, Which Ensures A Longer Service Time And Hard-Wearing. The Bracket With Triangle Structure, Holds A Well Loading Of Weight. Max Load Capacity: 440Lb/Set..
Space Saving -- The Folding Table Brackets Are Great To Mount On The Wall To Save More Extra Space Like Kitchens, Bedroom,Offices, Patios, Balcony, Bathroom, Motorhome, Bookshelf, Garden Shelf, Shop, Stores, Workshops And More..
Easy Installation -- Using With A Length In 8"(200Mm) Double Head Long Screwdriver Bit And A Stable Rectangle Leveling Tool, The Wall Mount Foldable Shelves Brackets Are Easily To Make The Two Bracket Are Parallel To Each Other And Perpendicular To The Wall. Meanwhile, The Long Double Head Screwdriver Bit Will Keep Your Hand Away From Scratched By The Angle During Installation..
How To Choose The Right Size -- The Movable Bracket L16 X H6.9 Inch (40 X 17 Cm). Each Arm Has 3 Holes For Screw Installation, The Hole Of Short Arm Diameter Is 0.25"(6.5Mm), And The Hole Of Long Arm Diameter Is 0.2"(5Mm). Max Load Capacity: 550Lb/Set. It Is Recommended To Match The Depth Of The Partition With The Length Of The Bracket To Ensure The Maximum Bearing Capacity..
Features
- PACKAGE INCLUDE -- Package comes with 4 pack 16" folding shelf brackets mounting accessories, 10pcs 4.8*35mm long premium stainless steel screws, 10pcs 4.2*16mm short premium stainless steel screws and 10pcs 8*4mm top quality expand anchors, 1pc leveling tool (rectangle without rolling) and 1pc double head long screwdriver bit (8"/200mm, protect your hand away from scratched).
- HOW TO CHOOSE THE RIGHT SIZE -- The movable Bracket L16 x H6.9 Inch (40 x 17 cm). Each arm has 3 holes for screw installation, the hole of short arm diameter is 0.25(6.5mm), and the hole of long arm diameter is 0.2(5mm). Max load capacity: 550lb/set. It is recommended to match the depth of the partition with the length of the bracket to ensure the maximum bearing capacity.
- STURDY & DURABLE -- The 16 inch Folding Shelf Bracket and the screws is made of Type premium stainless steel. 304 surface brushed treatment steel, which ensures a longer service time and hard-wearing. The Bracket with triangle structure, holds a well loading of weight. Max load capacity: 440lb/set.
- EASY INSTALLATION -- Using with a length in 8(200mm) double head long screwdriver bit and a stable rectangle leveling tool, the wall mount foldable shelves brackets are easily to make the two bracket are parallel to each other and perpendicular to the wall. Meanwhile, the long double head screwdriver bit will keep your hand away from scratched by the angle during installation.
- SPACE SAVING -- The folding table brackets are great to mount on the wall to save more extra space like kitchens, bedroom,offices, patios, balcony, bathroom, motorhome, bookshelf, garden shelf, shop, stores, workshops and more.
- See more on Amazon...
Brand: MySit | Manufacturer: MySit
See On Amazon #6
MySit Heavy Duty 300 LBs Office Chair Tilt Mechanism Replacement Parts, 5.9'' x 8.6" Mounting Holes Tilt Control Mechanism(Not Standard Dimension)
Asin: B0C64P78V8 | Model: MY1522 | PartNumber: MY1522
Tilt Control - Push Lever In To Lock Tilt, Pull Out To Unlock..
Function - Single Lever For Seat Height Adjustment, Standard 1.1" Or 28Mm Socket Inner Diameter Fit Tapered Gas Lift Cylinders..
Heavy Duty 300Lbs - Replacement Office Chair Swivel Tilt Control Seat Mechanism Rated Up To 300Lbs..
Features
- NOT STANDARD SIZE - 8.6" length x 9" width screw mounting holes center distance with 1.1" ( 28mm )hole diameter. - This tilt mechanism is smaller shorter than the standard butterfly mechanisms. Please measure your screw mounting holes dimensions before ordering.
- HEAVY DUTY 300LBs - Replacement office chair swivel tilt control seat mechanism rated up to 300LBs.
- TILT CONTROL - Push lever in to lock tilt, pull out to unlock.
- FUNCTION - Single lever for seat height adjustment, standard 1.1 or 28mm socket inner diameter fit tapered gas lift cylinders.
- See more on Amazon...
Brand: MySit | Manufacturer: MySit
Dimensions: 8.60 x 8.60 x 5.90 inches | Weight: 3.95 Pounds
See On Amazon #7
MySit Gas Lift Cylinder Removal Tools 33mm/1.3-Inch, Removal Tool Set for Replacing Herman Miller Aeron Office Chair Cylinders, Fix Sinking Chair Saver for Stop Sinking - 2 Pieces
Asin: B0CCJ9JRBK | Model: GasliftNEW-1 | PartNumber: GasliftNEW-1
Notice For Cylinder Replacement: 1.Install The Top Ring Collars On Cylinder(Using Short Screws), Make Sure This Ring Can Slide Along The Cylinder; 2.Install The Below Ring Collars On Cylinder(Using Short Screws), Make Sure This Below Ring Tightly Enough And Cannot Slide; 3.Install And Tighten 2 Long Screws On Below Ring Alternately, To Avoid The Below Rings Tilt And Cannot Disassembly..
Fix Sinking Office Chair Use -- Office Chair Saver For Stop Sinking Can Control The Height Of The Seat, Prevent Repeated Sinking, The Office Chair Replacement Parts Can Hold Weight Up To 600 Pounds. It Takes Few Minutes Only, Please Adjusting The Height Of The Chair You Need Before Install This Chair Adjustable Saver..
Applicable Size 33Mm -- Removal Tool For Replacing The Cylinder Of Herman Miller Aeron Office Chair Within 1.3"(33Mm) Diameter..
Replace Gas Lift Cylinder Use -- No Other Tools Required, Using This Tool Set To Remove/Replace Many Years Sinking Gas Cylinder, Let Disassemble Easily To Save Your Strength And Time..
Features
- DURABLE CHAIR CYLINDER REMOVAL TOOLS KIT -- Mysit adjustable office chair cylinder removal tools are made of durable stainless steel. Package inludes 2pcs stainless steel cylinder clamp shafts, 2pcs long bolts, 1pc L wrench.
- REPLACE GAS LIFT CYLINDER USE -- No other tools required, using this tool set to remove/replace many years sinking gas cylinder, let disassemble easily to save your strength and time.
- NOTICE FOR CYLINDER REPLACEMENT: 1.Install the top ring collars on cylinder(using short screws), make sure this ring CAN slide along the cylinder; 2.Install the below ring collars on cylinder(using short screws), make sure this below ring tightly enough and CANNOT slide; 3.Install and tighten 2 long screws on below ring ALTERNATELY, to avoid the below rings tilt and cannot disassembly.
- APPLICABLE SIZE 33MM -- Removal tool for replacing the cylinder of Herman Miller Aeron office chair within 1.3(33mm) diameter.
- FIX SINKING OFFICE CHAIR USE -- Office chair saver for stop sinking can control the height of the seat, prevent repeated sinking, the office chair replacement parts can hold weight up to 600 pounds. It takes few minutes only, please adjusting the height of the chair you need before install this chair adjustable saver.
- See more on Amazon...
Brand: MySit | Manufacturer: MySit
Dimensions: 6.50 x 2.00 x 2.00 Inches | Weight: 0.85 pounds
See On Amazon