Nodehawk - Buying Guide
Last Updated: 05/22/2024
Share on
Bestselling from Nodehawk on Amazon
- 12V Water Pump DC Diaphragm Pump with 2 Hose Clamps,Self Priming Sprayer Pump with Pressure Switch 4...
- AC Current Sensor Transformer, Core Current Transformer Coil Sensor for 100A Amp Energy Meter
- DC Multifunction Monitor Meter,6-200V,0-100A,LCD Display Digital Current Voltage Solar Power Meter M...
- Current Transmitter, FCS521-SD-420E Current Transducer Transmitter Transformer Sensor AC Current Con...
- Current Sensing Relay AC Current Sensing Switch 0-30A Normally Open Current Sensor Monitoring Relay ...
- Current Sensing Relay AC Current Sensing Switch 0-50A Normally Closed Current Sensor Monitoring Rela...
- 180 Pcs Solder Seal Wire Connectors,Electrical Connectors Heat Shrink Wire Connectors Waterproof Wir...
- AC Current Sensor Transformer, Core Current Transformer Coil Sensor for 50A Amp Energy Meter
- Signal Isolator DC 24V,PLC Detect Signal Conditioner,Module Analog Output(1 in 2 Out 4-20mA Turn 4-20mA)
- Miniature Current Switch,Current Sensing Switch,with Rails,Normally Open Amp Sensor Monitoring Relay...
#1
12V Water Pump DC Diaphragm Pump with 2 Hose Clamps,Self Priming Sprayer Pump with Pressure Switch 4.5 L/Min 1.2 GPM 87 PSI Adjustable,Caravan RV Boat Marine Agricultural Spraying Water Pump
Asin: B0D1FR3RFK | Model: GB-2442ZZ | PartNumber: GB-2442ZZ | Ean: 4135484003875
Water Transfer Pump Notice:All Water Pump Have Been Strictly Tested Before Leaving The Factory, Including Test Voltage And Water Pressure. Therefore, Little Water To Be Found Inside This Sprayer Pump Is Normal, Which Will Not Affect Your Use..
Widely Application:The Diaphragm Pump Is Widely Used In Agricultural And Life.Ideal For Marine, Caravans/Rv, Including Garden Sprinklers, Lawns, Showers, Boat Taps,Rv, Boats, Family Gardens And Camping..
The Small Water Pump Is Sealed To Prevent Incidental Moisture And Dust From Entering. The Pump Can Not Run Continuously More Than 6 Hours. Able To Operate In A Wet Environment. Self Priming Function Allows It To Be Mounted Above Water Tank,All Water Pressure Diaphragm Pump Have Sealed Switch And Coating To Prevent Corrosion.
Tip: There Is An Arrow On The Left Side Of The Water Pump Electric Cover Indicating The Direction Of The Water Outlet. Please Refer To The Arrow Direction To Connect The Water Pipe,Comes With 2 Tube Clamps.
Features
- Main parameters of 12V water pump:: 3/9-inch hose barb ports. Vertical Suction Lift: 6.6ft (2m). Adjustable CUT-OFF Pressure: Default 87PSI(6Bar), MAX 120 PSI. It doesn't mean 1.5GPM jet at 100PSI.
- Tip: There is an arrow on the left side of the water pump electric cover indicating the direction of the water outlet. Please refer to the arrow direction to connect the water pipe,Comes with 2 tube clamps
- Water transfer pump Notice:All water pump have been strictly tested before leaving the factory, including test voltage and water pressure. Therefore, little water to be found inside this sprayer pump is normal, which will not affect your use.
- The small water pump is sealed to prevent incidental moisture and dust from entering. The pump can not run continuously more than 6 hours. Able to operate in a wet environment. Self priming function allows it to be mounted above water tank,All water pressure diaphragm pump have sealed switch and coating to prevent corrosion
- Widely Application:The diaphragm pump is widely used in agricultural and life.Ideal for marine, caravans/RV, Including garden sprinklers, lawns, showers, boat taps,RV, boats, family gardens and camping.
- See more on Amazon...
Brand: nodehawk | Manufacturer: nodehawk
Dimensions: 2.55 x 6.70 x 3.70 Inches | Weight: 1.44 pounds
See On Amazon #2
AC Current Sensor Transformer, Core Current Transformer Coil Sensor for 100A Amp Energy Meter
Asin: B0B92MCV7P | Model: 3395597999606 | PartNumber: 3395597999606 | Ean: 3395597999606
Good Mechanical Properties: Fully Enclosed, Good Mechanical Properties And Environmental Resistance, Strong Voltage Isolation Capability, Safety And Reliability..
Mini Size:This Is A Mini Split Base Current Transformer; It's The Smallest One Compared To The Similar Products (Output 5Ma)..
Used For Energy Meter In Special: Current Transducer Used For Energy Meter In Special; Ac 220V, 380V Power Supply Can Both Be Applied..
Snap Joint Structure:The Diameter Of Inner Hole Is 24Mm, The Accuracy Is 0.5 Grade, Using Snap Joint Structure, It Can Be Fixed To The Cable Directly Through Nylon Ties..
Features
- SMALL AND LIGHT: This current transformer Built-in input coil; small and light, easy to install.
- SNAP JOINT STRUCTURE:The diameter of inner hole is 24mm, the accuracy is 0.5 grade, Using snap joint structure, it can be fixed to the cable directly through nylon ties.
- GOOD MECHANICAL PROPERTIES: Fully enclosed, good mechanical properties and environmental resistance, strong voltage isolation capability, safety and reliability.
- USED FOR ENERGY METER IN SPECIAL: Current transducer used for energy meter in special; AC 220v, 380v power supply can both be applied.
- MINI SIZE:This is a mini split base current transformer; it's the smallest one compared to the similar products (output 5MA).
- See more on Amazon...
Brand: nodehawk | Manufacturer: nodehawk
Dimensions: 1.26 x 2.56 x 2.13 Inches
See On Amazon #3
DC Multifunction Monitor Meter,6-200V,0-100A,LCD Display Digital Current Voltage Solar Power Meter Multimeter Ammeter Voltmeter
Asin: B0BZXWP4VS | Ean: 6451926025006
Lcd Display: 51X30mm Easy Reading Lcd Screen,Large-Screen Lcd With A Full Sight Of 180° View,Clearly Displays All Testing Figures At The Same Time, The Blue Backlight Can Be Turned On/Off Manually, Reset Energy Value, Set Voltage Alarm Threshold And Choose Measuring Range.
Wildly Application:Dc Multifunction Battery Meter Wildly Applied To Solar System/Industrial Assembly Line/Automobile/Rv Etc..
Backlit Dc Multi-Meter: The Large-Screen Display Can Display Voltage, Current, Active Power, Accumulated Energy,Which Is Practical For Use And Can Meet Your Various Work Needs.
Data Storage Design - It Is Designed To Automatically Storage The Last Testing Data When Suddenly Powered Off And The Energy Value Can Be Reset By A Short Press After Long Pressing The Function Button For Seconds.
Features
- DC Multimeter - Measure the maximum current:0~100A,with 0.5%grade measuring accuracy, Voltage 0-200V,Capacity 0-1000AH,Dump energy 0 9999kWh,it combines Voltage, Current, Power and Energy measurement in one combo, super compact and lightweight that can be portable and easily used
- Data Storage Design - it is designed to automatically storage the last testing data when suddenly powered off and the energy value can be reset by a short press after long pressing the function button for seconds
- LCD Display: 51x30mm easy reading LCD screen,Large-screen LCD with a full sight of 180 view,clearly displays all testing figures at the same time, The blue backlight can be turned on/off manually, reset energy value, set voltage alarm threshold and choose measuring range
- Backlit DC Multi-meter: the large-screen display can display voltage, current, active power, accumulated energy,which is practical for use and can meet your various work needs
- Wildly application:DC multifunction battery meter wildly applied to solar system/industrial assembly line/Automobile/RV etc.
- See more on Amazon...
Brand: nodehawk | Manufacturer: nodehawk
See On Amazon #4
Current Transmitter, FCS521-SD-420E Current Transducer Transmitter Transformer Sensor AC Current Converter 0-50A
Asin: B0B56PZNR9 | Model: 3395597999446 | PartNumber: 3395597999446 | Ean: 3395597999446
Installation And Using Are Easy And Convenient, There Is No Need To Connect The Dc Series Into The Circuit During Measurement.Through-Heart Structure Design, Isolation Withstand Voltage Up To 2000V Ac..
It Is Suitable For Various Applications Requiring Current And Voltage Conversion.It Has The Characteristics Of Strong Overload Ability, High Precision, High Isolation, High Security, Low Power Consumption And Strong Anti-Interference Ability..
The Outer Casing Is Made Of Self-Extinguishing Material, Safe And Durable.It Is Used For Ac Current Monitoring, Detection, Current Overload Protection, And Is Also Used As An Electronic Switch For Automatic Control Systems..
The Measured Current Ac: 0-10A / 20A / 50A Can Be Selected.Output Signal Dc: 0-5V / 0-10V /4-20Ma Three Forms Are Available..
Features
- Mutual inductance current monitoring, high current detection accuracy, stable performance, safe isolation of input and output.Magnetic hysteresis less than 1%, can be used in strong magnetic field conditions.
- The measured current AC: 0-10A / 20A / 50A can be selected.Output signal DC: 0-5V / 0-10V /4-20mA three forms are available.
- Installation and using are easy and convenient, there is no need to connect the dc series into the circuit during measurement.Through-heart structure design, isolation withstand voltage up to 2000V AC.
- The outer casing is made of self-extinguishing material, safe and durable.It is used for AC current monitoring, detection, current overload protection, and is also used as an electronic switch for automatic control systems.
- It is suitable for various applications requiring current and voltage conversion.It has the characteristics of strong overload ability, high precision, high isolation, high security, low power consumption and strong anti-interference ability.
- See more on Amazon...
Brand: Nodehawk | Manufacturer: Nodehawk
Dimensions: 2.40 x 3.54 x 0.98 inches
See On Amazon #5
Current Sensing Relay AC Current Sensing Switch 0-30A Normally Open Current Sensor Monitoring Relay (M3050)
Asin: B0B7VT46KG | Ean: 3395597999484
High Performance: The Switch Has No Limit On The Number Of Times Of Opening And Closing, And The Response Speed Reaches The Millisecond Level. The Hysteresis Is Less Than 1% And Can Be Used Under Strong Magnetic Conditions. Through Structure Design, Isolation Withstand Voltage Up To 2000V..
Abs Material: High-Power Mos Tube Non-Contact Electronic Switch Is Used, And The Shell Is Made Of Self-Extinguishing Material Abs, Which Is Heat-Resistant, Acid-Alkali-Resistant, High Impact Strength And Stable In Performance..
Led Indication: The Action Current Is 0-30A Ac, Which Can Be Adjusted By The Potentiometer. The Led Indicator Light Can Easily And Intuitively Indicate The Working Status Of The Switch..
Upgrade: Compared With Traditional Transformers, Thermal Protectors And Other Devices, Using This Device Can Not Only Get More Accurate And Timely Control, But Also Greatly Simplify The Design And Reduce Costs. Self-Powered, No External Power Supply Required. Input Through Current: 0-30A Ac Rated Load: 0.3A@240V Ac/Dc..
Features
- Multi-Purpose: M-3050 AC current sensing switch is specially designed and manufactured to solve AC current monitoring. It uses the principle of mutual inductance to sense AC direct current, isolate the AC current, output normally open or normally closed switch signals, and directly control various automated industrial equipment, such as flash lamps, buzzers, relays, microcontrollers or other power load equipment.
- Upgrade: Compared with traditional transformers, thermal protectors and other devices, using this device can not only get more accurate and timely control, but also greatly simplify the design and reduce costs. Self-powered, no external power supply required. Input through current: 0-30A AC Rated load: 0.3A@240V AC/DC.
- High Performance: The switch has no limit on the number of times of opening and closing, and the response speed reaches the millisecond level. The hysteresis is less than 1% and can be used under strong magnetic conditions. Through structure design, isolation withstand voltage up to 2000V.
- LED Indication: The action current is 0-30A AC, which can be adjusted by the potentiometer. The LED indicator light can easily and intuitively indicate the working status of the switch.
- ABS material: High-power MOS tube non-contact electronic switch is used, and the shell is made of self-extinguishing material ABS, which is heat-resistant, acid-alkali-resistant, high impact strength and stable in performance.
- See more on Amazon...
Brand: nodehawk | Manufacturer: nodehawk
Dimensions: 3.00 x 3.00 x 1.00 Inches
See On Amazon #6
Current Sensing Relay AC Current Sensing Switch 0-50A Normally Closed Current Sensor Monitoring Relay (N50)
Asin: B0B566KGYT | Ean: 3395597999316
Faster Response Time: Once Current Flow Is Detected, It Closes A Set Of Contacts Immidiately; Response Time: ≤200Ms.
Normally Open Current Sensor:Suitable For Ac Current Measurement And Monitoring, Ac Motor Overload Protection, Electronic Switch Of Automatic Control System And So On..
Mutual Inductance Current Monitoring,Security Isolatino Of Input And Output,Self-Powered,Adjustable With A Potentiometer.Led Indicator Can Conveniently And Intuitively Indicate The Working Status Of The Switch..
Accurate & Dependable: Offers A Sensing Range Of 0.2 To 50 Amps And Universal, Solid-State Outputs; Accuracy: 1%.
Features
- Universal Outputs: Input through current: 0.2-50A AC Rated load: 0.3A@240V AC/DC.
- Accurate & Dependable: Offers a sensing range of 0.2 to 50 amps and universal, solid-state outputs; Accuracy: 1%
- Faster Response Time: Once current flow is detected, it closes a set of contacts immidiately; Response Time: 200ms
- Mutual Inductance Current Monitoring,security isolatino of input and output,Self-powered,adjustable with a potentiometer.LED indicator can conveniently and intuitively indicate the working status of the switch.
- Normally open current sensor:Suitable for AC current measurement and monitoring, AC motor overload protection, electronic switch of automatic control system and so on.
- See more on Amazon...
Brand: nodehawk | Manufacturer: nodehawk
Dimensions: 1.85 x 2.55 x 0.98 Inches
See On Amazon #7
180 Pcs Solder Seal Wire Connectors,Electrical Connectors Heat Shrink Wire Connectors Waterproof Wire Connectors-Insulated Electrical for Marine Automotive Motorcycle Wiring Boat Truck
Asin: B0BGSD6P66 | Model: 3395597999828 | PartNumber: 3395597999828 | Ean: 3395597999828
Wide Applications: Butt Connectors Are Ideal For Marine, Automotive, Trailer And Other Outdoor Applications..
180 Pcs Heat Shrink Butt Connectors Kit : Including Solder Seal Wire Connectors Red 60 Pcs, Blue 60 Pcs, White 45 Pcs,Yellow 15 Pcs..
High Quality Solder Seal Rings: Use Exclusive Material In The Wire Connectors To Avoid Shrink Tubing Melting Before Solder..
Waterproof & Insulating: The Heat Shrink Tube Shrinks And Wraps The Wire Tightly When Heat Is Applied. Meanwhile, Waterproof Hot Melt Adhesive Rings Melt And Create A Watertight Seal, Making The Connection Tight, Secure, Insulated And Waterproof..
Features
- Easy to Use: Heat shrink wire connectors can be connected with just a heat gun, no crimping tool or soldering machine is needed.This wire connector kit makes electrical work easier and quicker.
- Waterproof & Insulating: The heat shrink tube shrinks and wraps the wire tightly when heat is applied. Meanwhile, waterproof hot melt adhesive rings melt and create a watertight seal, making the connection tight, secure, insulated and waterproof.
- Wide Applications: Butt connectors are ideal for marine, automotive, trailer and other outdoor applications.
- High Quality Solder Seal Rings: Use exclusive material in the wire connectors to avoid shrink tubing melting before solder.
- 180 Pcs Heat Shrink Butt Connectors Kit : Including solder seal wire connectors Red 60 PCS, Blue 60 PCS, White 45 PCS,Yellow 15 PCS.
- See more on Amazon...
Brand: nodehawk | Manufacturer: nodehawk
See On Amazon #8
AC Current Sensor Transformer, Core Current Transformer Coil Sensor for 50A Amp Energy Meter
Asin: B0CSMR8YD1 | Ean: 4135484000164
Good Mechanical Properties: Fully Enclosed, Good Mechanical Properties And Environmental Resistance, Strong Voltage Isolation Capability, Safety And Reliability..
Mini Size:This Is A Mini Split Base Current Transformer; It's The Smallest One Compared To The Similar Products (Output 5Ma)..
Used For Energy Meter In Special: Current Transducer Used For Energy Meter In Special; Ac 220V, 380V Power Supply Can Both Be Applied..
Snap Joint Structure:The Diameter Of Inner Hole Is 24Mm, The Accuracy Is 0.5 Grade, Using Snap Joint Structure, It Can Be Fixed To The Cable Directly Through Nylon Ties..
Features
- SMALL AND LIGHT: This current transformer Built-in input coil; small and light, easy to install.
- SNAP JOINT STRUCTURE:The diameter of inner hole is 24mm, the accuracy is 0.5 grade, Using snap joint structure, it can be fixed to the cable directly through nylon ties.
- GOOD MECHANICAL PROPERTIES: Fully enclosed, good mechanical properties and environmental resistance, strong voltage isolation capability, safety and reliability.
- USED FOR ENERGY METER IN SPECIAL: Current transducer used for energy meter in special; AC 220v, 380v power supply can both be applied.
- MINI SIZE:This is a mini split base current transformer; it's the smallest one compared to the similar products (output 5MA).
- See more on Amazon...
Brand: nodehawk | Manufacturer: nodehawk
See On Amazon #9
Signal Isolator DC 24V,PLC Detect Signal Conditioner,Module Analog Output(1 in 2 Out 4-20mA Turn 4-20mA)
Asin: B0CF5M81CC | Ean: 1158321765395
Performance: Input/Output Signal Isolation: Effectively Removes Electromagnetic Interference During Signal Transmission. Input Signal/Power Isolation: Effectively Filters Out Noise In The Signal, Greatly Improving Signal Stability.
Product Material And Safety: Current Signal Conditioner Is Made Of High Quality Electronic Components With High Precision,High Precision, Low Temperature Drift.
Widely Used: Signal Converters Are Widely Used In Industrial Equipment, Such As Large Motors, Medical Equipment,Power System,Mechanical Equipment,Etc..
Specifications: Dc Signal Conditioner Supply Voltage: Dc 10V ± 10%; Rated Power Consumption: 1W; Response Time: 100Ms; Dielectric Strength: 2000V Ac / 1Min; Input Impedance: 50Ω; Ambient Temperature: -20 - 55 (℃); Size: 3.93 × 0.88 × 4.5 Inches..
Features
- Signal Isolator:Input and output,ultra-thin, intelligent and isolated safety net. Channel configuration:1 input and 2 outputs.Standard guide rail slot, used in conjunction with guide rails, facilitates dense installation and saves space
- Specifications: DC signal conditioner supply voltage: DC 10V 10%; rated power consumption: 1W; response time: 100MS; dielectric strength: 2000V AC / 1MIN; input impedance: 50 ; ambient temperature: -20 - 55 ( ); size: 3.93 0.88 4.5 Inches.
- Performance: Input/output signal isolation: effectively removes electromagnetic interference during signal transmission. Input signal/power isolation: effectively filters out noise in the signal, greatly improving signal stability
- Widely Used: Signal converters are widely used in industrial equipment, such as large motors, medical equipment,Power system,mechanical equipment,etc.
- Product Material and Safety: Current signal conditioner is made of high quality electronic components with high precision,High precision, low temperature drift
- See more on Amazon...
Brand: nodehawk | Manufacturer: nodehawk
See On Amazon #10
Miniature Current Switch,Current Sensing Switch,with Rails,Normally Open Amp Sensor Monitoring Relay, AC 0-30A Detectable M3050
Asin: B0BG7YGTR7 | Ean: 3395597999903
High Performance: The Switch Has No Limit On The Number Of Times Of Opening And Closing, And The Response Speed Reaches The Millisecond Level. The Hysteresis Is Less Than 1% And Can Be Used Under Strong Magnetic Conditions. Through Structure Design, Isolation Withstand Voltage Up To 2000V..
Abs Material: High-Power Mos Tube Non-Contact Electronic Switch Is Used, And The Shell Is Made Of Self-Extinguishing Material Abs, Which Is Heat-Resistant, Acid-Alkali-Resistant, High Impact Strength And Stable In Performance..
Led Indication: The Action Current Is 0-30A Ac, Which Can Be Adjusted By The Potentiometer. The Led Indicator Light Can Easily And Intuitively Indicate The Working Status Of The Switch..
Upgrade: Compared With Traditional Transformers, Thermal Protectors And Other Devices, Using This Device Can Not Only Get More Accurate And Timely Control, But Also Greatly Simplify The Design And Reduce Costs. Self-Powered, No External Power Supply Required. Input Through Current: 0-30A Ac Rated Load: 0.3A@240V Ac/Dc..
Features
- Multi-Purpose: M3050 AC with rails current sensing switch is specially designed and manufactured to solve AC current monitoring. It uses the principle of mutual inductance to sense AC direct current, isolate the AC current, output normally open or normally closed switch signals, and directly control various automated industrial equipment, such as flash lamps, buzzers, relays, microcontrollers or other power load equipment.
- Upgrade: Compared with traditional transformers, thermal protectors and other devices, using this device can not only get more accurate and timely control, but also greatly simplify the design and reduce costs. Self-powered, no external power supply required. Input through current: 0-30A AC Rated load: 0.3A@240V AC/DC.
- High Performance: The switch has no limit on the number of times of opening and closing, and the response speed reaches the millisecond level. The hysteresis is less than 1% and can be used under strong magnetic conditions. Through structure design, isolation withstand voltage up to 2000V.
- LED Indication: The action current is 0-30A AC, which can be adjusted by the potentiometer. The LED indicator light can easily and intuitively indicate the working status of the switch.
- ABS material: High-power MOS tube non-contact electronic switch is used, and the shell is made of self-extinguishing material ABS, which is heat-resistant, acid-alkali-resistant, high impact strength and stable in performance.
- See more on Amazon...
Brand: nodehawk | Manufacturer: nodehawk
See On Amazon #11
Digital Multimeter AC 40-280V 100A LCD Display Digital Current Voltage Power Energy Frequency Power Factor Multimeter Ammeter Voltmeter with 100A Split Core Current Transformer
Asin: B0BCHVZPHK | Ean: 3395597999781
6-In-1 Digital Multi-Meter: The Large-Screen Display Can Display Voltage, Current, Active Power, Accumulated Energy, Frequency, Power Factor At The Same Time, Which Is Practical For Use And Can Meet Your Various Work Needs.
Wide Application: It Can Be Applied In Home Appliances, High And Low Power Distribution Cabinets, Inverter Power Supplies, Electrical Maintenance, Assembly Line Testing And Photovoltaic Systems.
Automatic Data Storage Function: In The Event Of A Sudden Power Failure, The Last Test Data Will Be Automatically Saved; No Need To Worry About Data Loss Due To Sudden Power Failure.
Power Overload Alarm Function: If The Power Alarm Threshold Is Exceeded, The Backlight And Power Will Flash At The Same Time And An Alarm Will Be Issued; You Can Set The Power Limit Yourself.
Features
- Backlight control: the backlight can be turned on or off by shortly pressing the button, and the backlight state will be automatically saved when power off
- Power overload alarm function: if the power alarm threshold is exceeded, the backlight and power will flash at the same time and an alarm will be issued; You can set the power limit yourself
- 6-In-1 digital multi-meter: the large-screen display can display voltage, current, active power, accumulated energy, frequency, power factor at the same time, which is practical for use and can meet your various work needs
- Automatic data storage function: in the event of a sudden power failure, the last test data will be automatically saved; No need to worry about data loss due to sudden power failure
- Wide application: it can be applied in home appliances, high and low power distribution cabinets, inverter power supplies, electrical maintenance, assembly line testing and photovoltaic systems
- See more on Amazon...
Brand: nodehawk | Manufacturer: nodehawk
See On Amazon #12
12V DC Water Transfer Pump Diaphragm Pump with 2 Hose Clamps,Self Priming Sprayer Pump with Pressure Switch 4.5 L/Min 1.2 GPM 87 PSI Adjustable,Caravan RV Boat Marine Agricultural Spraying Water Pump
Asin: B0CLQZK5H2 | Model: GB-2442ZZ | PartNumber: GB-2442ZZ | Ean: 4135484000157
Water Transfer Pump Notice:All Water Pump Have Been Strictly Tested Before Leaving The Factory, Including Test Voltage And Water Pressure. Therefore, Little Water To Be Found Inside This Sprayer Pump Is Normal, Which Will Not Affect Your Use..
Widely Application:The Diaphragm Pump Is Widely Used In Agricultural And Life.Ideal For Marine, Caravans/Rv, Including Garden Sprinklers, Lawns, Showers, Boat Taps,Rv, Boats, Family Gardens And Camping..
The Small Water Pump Is Sealed To Prevent Incidental Moisture And Dust From Entering. The Pump Can Not Run Continuously More Than 6 Hours. Able To Operate In A Wet Environment. Self Priming Function Allows It To Be Mounted Above Water Tank,All Water Pressure Diaphragm Pump Have Sealed Switch And Coating To Prevent Corrosion.
Tip: There Is An Arrow On The Left Side Of The Water Pump Electric Cover Indicating The Direction Of The Water Outlet. Please Refer To The Arrow Direction To Connect The Water Pipe,Comes With 2 Tube Clamps.
Features
- Main parameters of 12V water pump:: 3/9-inch hose barb ports. Vertical Suction Lift: 6.6ft (2m). Adjustable CUT-OFF Pressure: Default 87PSI(6Bar), MAX 120 PSI. It doesn't mean 1.5GPM jet at 100PSI.
- Tip: There is an arrow on the left side of the water pump electric cover indicating the direction of the water outlet. Please refer to the arrow direction to connect the water pipe,Comes with 2 tube clamps
- Water transfer pump Notice:All water pump have been strictly tested before leaving the factory, including test voltage and water pressure. Therefore, little water to be found inside this sprayer pump is normal, which will not affect your use.
- The small water pump is sealed to prevent incidental moisture and dust from entering. The pump can not run continuously more than 6 hours. Able to operate in a wet environment. Self priming function allows it to be mounted above water tank,All water pressure diaphragm pump have sealed switch and coating to prevent corrosion
- Widely Application:The diaphragm pump is widely used in agricultural and life.Ideal for marine, caravans/RV, Including garden sprinklers, lawns, showers, boat taps,RV, boats, family gardens and camping.
- See more on Amazon...
Brand: nodehawk | Manufacturer: nodehawk
Dimensions: 2.55 x 6.70 x 3.74 Inches
See On Amazon #13
AC Current Switch Transducer Input 1A-200A Switching Max 0.3A@135V AC/DC Solid Core Self-Powered 16K-SD-NO-AL
Asin: B0B56BZVRJ | Ean: 3395597999378
High Performance: The Switch Has No Limit On The Number Of Times Of Opening And Closing, And The Response Speed Reaches The Millisecond Level. The Hysteresis Is Less Than 1% And Can Be Used Under Strong Magnetic Conditions. Through Structure Design, Isolation Withstand Voltage Up To 2000V..
Abs Material: High-Power Mos Tube Non-Contact Electronic Switch Is Used, And The Shell Is Made Of Self-Extinguishing Material Abs, Which Is Heat-Resistant, Acid-Alkali-Resistant, High Impact Strength And Stable In Performance..
Led Indication: Which Can Be Adjusted By The Potentiometer. The Led Indicator Light Can Easily And Intuitively Indicate The Working Status Of The Switch..
Upgrade: Compared With Traditional Transformers, Thermal Protectors And Other Devices, Using This Device Can Not Only Get More Accurate And Timely Control, But Also Greatly Simplify The Design And Reduce Costs. Self-Powered, No External Power Supply Required..
Features
- Multi-Purpose: AC current sensing switch is specially designed and manufactured to solve AC current monitoring. It uses the principle of mutual inductance to sense AC direct current, isolate the AC current, output normally open or normally closed switch signals, and directly control various automated industrial equipment, such as flash lamps, buzzers, relays, microcontrollers or other power load equipment.
- Upgrade: Compared with traditional transformers, thermal protectors and other devices, using this device can not only get more accurate and timely control, but also greatly simplify the design and reduce costs. Self-powered, no external power supply required.
- High Performance: The switch has no limit on the number of times of opening and closing, and the response speed reaches the millisecond level. The hysteresis is less than 1% and can be used under strong magnetic conditions. Through structure design, isolation withstand voltage up to 2000V.
- LED Indication: which can be adjusted by the potentiometer. The LED indicator light can easily and intuitively indicate the working status of the switch.
- ABS material: High-power MOS tube non-contact electronic switch is used, and the shell is made of self-extinguishing material ABS, which is heat-resistant, acid-alkali-resistant, high impact strength and stable in performance.
- See more on Amazon...
Brand: nodehawk | Manufacturer: Nodehawk
Dimensions: 0.79 x 2.36 x 3.54 Inches
See On Amazon #14
Doorbell Transformer 24V 40VA Thermostat Power Adapter Hardwired Door Chime Transformer Compatible with Video Doorbell Ring Pro Nest Hello
Asin: B0D14JTHMX | Model: 1 | PartNumber: 1 | Ean: 4135484000775
Safety Protection: Doorbell Transformer 24V 40Va Is Made Of Environmentally Friendly Galvanized Technology, No Longer Service Life. The Transformer Is Safety Tested And 100% Safe. The Ring Hardwired Transformer Has A Built-In Fuse That Can Be Blown In Case Of Overload To Prevent Fire Hazard. With Overcurrent Protection, Overload Protection And Short Circuit Protection, You Can Use It With Confidence..
Quality Service: The Chime Transformer Has Been Tested For Safe Operation And Long Service Life. If Any Problem Occurs During The Use Of The Product, Please Contact Us..
Easy Installation: It Doesn't Take Much Time To Install This Ring Transformer For Video Doorbell Wired Just Use Screws Or Threaded Clips To Fix It On The Electrical Box..
Wide Range Of Applications：This Transformer For Ring Doorbell Is Compatible With Most Brands Of Doorbells Or Thermostats To Power Low Voltage Hardwired Doorbells For Residential, Commercial And Industrial Use. Our Ring Doorbell Transformer Are Compatible With Ring Video Doorbell Pro, Nest Hello Video Doorbell And More. Warning: If You Have Any Questions About Compatible Models, Please Feel Free To Contact Us!.
Features
- POWERFUL PERFORMANCE: With an input voltage of 120V, 60Hz AC and an output voltage of 24V, 40VA AC, this upgraded doorbell transformer makes it easy to power single or multiple doorbells in your home, eliminating problems caused by insufficient power and replacing older door bell transformers that are underpowered for better performance. The ring transformer uses pure copper wire, which uses 10% more wire than a regular inverter for a more stable charging connection.
- WIDE RANGE OF APPLICATIONS This transformer for ring doorbell is compatible with most brands of doorbells or thermostats to power low voltage hardwired doorbells for residential, commercial and industrial use. Our ring doorbell transformer are compatible with Ring Video Doorbell Pro, Nest Hello Video Doorbell and more. WARNING: If you have any questions about compatible models, please feel free to contact us!
- SAFETY PROTECTION: Doorbell transformer 24v 40va is made of environmentally friendly galvanized technology, no longer service life. The transformer is safety tested and 100% safe. The ring hardwired transformer has a built-in fuse that can be blown in case of overload to prevent fire hazard. With overcurrent protection, overload protection and short circuit protection, you can use it with confidence.
- EASY INSTALLATION: It doesn't take much time to install this ring transformer for video doorbell wired just use screws or threaded clips to fix it on the electrical box.
- QUALITY SERVICE: The chime transformer has been tested for safe operation and long service life. If any problem occurs during the use of the product, please contact us.
- See more on Amazon...
Brand: nodehawk | Manufacturer: nodehawk
Dimensions: 2.59 x 1.18 x 1.88 Inches
See On Amazon #15
DC Multifunction Monitor Meter,6-200V,0-50A,LCD Display Digital Current Voltage Solar Power Meter Multimeter Ammeter Voltmeter
Asin: B0D1463ZLY | Ean: 4135484000737
Lcd Display: 51X30mm Easy Reading Lcd Screen,Large-Screen Lcd With A Full Sight Of 180° View,Clearly Displays All Testing Figures At The Same Time, The Blue Backlight Can Be Turned On/Off Manually, Reset Energy Value, Set Voltage Alarm Threshold And Choose Measuring Range..
Wildly Application:Dc Multifunction Battery Meter Wildly Applied To Solar System/Industrial Assembly Line/Automobile/Rv Etc..
Backlit Dc Multi-Meter: The Large-Screen Display Can Display Voltage, Current, Active Power, Accumulated Energy,Which Is Practical For Use And Can Meet Your Various Work Needs..
Data Storage Design - It Is Designed To Automatically Storage The Last Testing Data When Suddenly Powered Off And The Energy Value Can Be Reset By A Short Press After Long Pressing The Function Button For Seconds..
Features
- DC Multimeter - Measure the maximum current:0~50A,with 0.5%grade measuring accuracy, Voltage 0-200V,Capacity 0-1000AH,Dump energy 0 9999kWh,it combines Voltage, Current, Power and Energy measurement in one combo, super compact and lightweight that can be portable and easily used.
- Data Storage Design - it is designed to automatically storage the last testing data when suddenly powered off and the energy value can be reset by a short press after long pressing the function button for seconds.
- LCD Display: 51x30mm easy reading LCD screen,Large-screen LCD with a full sight of 180 view,clearly displays all testing figures at the same time, The blue backlight can be turned on/off manually, reset energy value, set voltage alarm threshold and choose measuring range.
- Backlit DC Multi-meter: the large-screen display can display voltage, current, active power, accumulated energy,which is practical for use and can meet your various work needs.
- Wildly application:DC multifunction battery meter wildly applied to solar system/industrial assembly line/Automobile/RV etc.
- See more on Amazon...
Brand: nodehawk | Manufacturer: nodehawk
See On Amazon #16
DC Multifunction Monitor Meter,6-200V,0-100A,LCD Display Digital Current Voltage Solar Power Meter Multimeter Ammeter Voltmeter
Asin: B0D143VRXC | Ean: 4135484000744
Lcd Display: 51X30mm Easy Reading Lcd Screen,Large-Screen Lcd With A Full Sight Of 180° View,Clearly Displays All Testing Figures At The Same Time, The Blue Backlight Can Be Turned On/Off Manually, Reset Energy Value, Set Voltage Alarm Threshold And Choose Measuring Range..
Wildly Application:Dc Multifunction Battery Meter Wildly Applied To Solar System/Industrial Assembly Line/Automobile/Rv Etc..
Backlit Dc Multi-Meter: The Large-Screen Display Can Display Voltage, Current, Active Power, Accumulated Energy,Which Is Practical For Use And Can Meet Your Various Work Needs..
Data Storage Design - It Is Designed To Automatically Storage The Last Testing Data When Suddenly Powered Off And The Energy Value Can Be Reset By A Short Press After Long Pressing The Function Button For Seconds..
Features
- DC Multimeter - Measure the maximum current:0~100A,with 0.5%grade measuring accuracy, Voltage 0-200V,Capacity 0-1000AH,Dump energy 0 9999kWh,it combines Voltage, Current, Power and Energy measurement in one combo, super compact and lightweight that can be portable and easily used.
- Data Storage Design - it is designed to automatically storage the last testing data when suddenly powered off and the energy value can be reset by a short press after long pressing the function button for seconds.
- LCD Display: 51x30mm easy reading LCD screen,Large-screen LCD with a full sight of 180 view,clearly displays all testing figures at the same time, The blue backlight can be turned on/off manually, reset energy value, set voltage alarm threshold and choose measuring range.
- Backlit DC Multi-meter: the large-screen display can display voltage, current, active power, accumulated energy,which is practical for use and can meet your various work needs.
- Wildly application:DC multifunction battery meter wildly applied to solar system/industrial assembly line/Automobile/RV etc.
- See more on Amazon...
Brand: nodehawk | Manufacturer: nodehawk
See On Amazon #17
DC Digital Display Induction Switch Transformer Sensitive Relay Current Overload Protector Alarm 8-30V(D05)
Asin: B0BG784YWR | Model: 3395597999880 | PartNumber: 3395597999880 | Ean: 3395597999880
Function:Used For The Measurement And Display Of A Single Current In The Electrical Circuit, And Can Be Equipped With A Relay Alarm Output..
More Practical:With Rails,It Has Realtime Current Monitoring And Alarm Output Functions, Which Has Strong Practicality..
Adjustable:The Upper And Lower Limit Alarm, Alarm Delay, And Alarm Return Difference Can Be Set, Meet Your Different Needs..
Safe Protection:Current Overload Protection, Monitors Whether The Equipment Is Working Normally, And There Is No Current To The Switch Signal..
Features
- Stable D05 220V input voltage, 0.3-50A measurement range, it has stable performance.
- Safe protection:Current overload protection, monitors whether the equipment is working normally, and there is no current to the switch signal.
- Function:Used for the measurement and display of a single current in the electrical circuit, and can be equipped with a relay alarm output.
- Adjustable:The upper and lower limit alarm, alarm delay, and alarm return difference can be set, meet your different needs.
- More practical:with rails,It has realtime current monitoring and alarm output functions, which has strong practicality.
- See more on Amazon...
Brand: nodehawk | Manufacturer: nodehawk
See On Amazon #18
5-PIN Relay 40/30AMP 12V DC Waterproof Relay with Harness - Heavy Duty 12 AWG Tinned Copper Wires Automotive Relay 5 Pack
Asin: B0D14NDMRR | Model: 4135484000713 | PartNumber: 4135484000713 | Ean: 4135484000713
Safety And Security: The Car Relay Base Is Made Of Plastic Material With Good Flame Resistance. Able To Protect The Vehicle And Avoid Fire In Case Of Accidental Short Circuit..
After-Sales Service:Please Do Not Use More Current Or Voltage Than The Relays Can Withstand. We Are Always Committed To Provide Quality After-Sales Service, If You Have Any Questions About The Product, Please Contact Us In Time, We Will Help You Solve It In The First Time..
5 Pin Relay Specifications: Coil Nominal Voltage: 12V Dc; Coil Power: 1.8W; Coil Resistance: 80Ω; Must Work Voltage: 6~8V Dc; Must Release Voltage: 0.6~3.6 V Dc; Maximum Applied Voltage: 15.6V Dc.
Quality Material: Dc Waterproof Relays And Wiring Harnesses Are Easy To Install And Use, Perfect For Replacing Old Relays. This 12V Relay Is Made Of Durable Composite Materials And Copper Coils For Good Conductivity And Stable Voltage. Our Automotive Relays Are Made Of Longer 12+16 Gauge Tinned Copper Wire, Which Is More Resistant To Corrosion And Oxidation Than Bare Copper Wire..
Features
- WATERPROOF RELAYS: 12v relay with harness are tightly sealed with rugged caps and seals to provide maximum protection. Waterproof, dustproof, and moisture resistant to ensure reliable performance even in harsh weather conditions. NOTE: Relay should not be used underwater.
- QUALITY MATERIAL: DC waterproof relays and wiring harnesses are easy to install and use, perfect for replacing old relays. This 12V relay is made of durable composite materials and copper coils for good conductivity and stable voltage. Our automotive relays are made of longer 12+16 gauge tinned copper wire, which is more resistant to corrosion and oxidation than bare copper wire.
- SAFETY AND SECURITY: The car relay base is made of plastic material with good flame resistance. Able to protect the vehicle and avoid fire in case of accidental short circuit.
- 5 PIN RELAY SPECIFICATIONS: coil nominal voltage: 12V DC; coil power: 1.8W; coil resistance: 80 ; must work voltage: 6~8V DC; must release voltage: 0.6~3.6 V DC; maximum applied voltage: 15.6V DC
- AFTER-SALES SERVICE:Please do not use more current or voltage than the relays can withstand. We are always committed to provide quality after-sales service, if you have any questions about the product, please contact us in time, we will help you solve it in the first time.
- See more on Amazon...
Brand: nodehawk | Manufacturer: nodehawk
Dimensions: 2.16 x 0.98 x 1.37 Inches
See On Amazon #19
4-PIN Relay 40/30AMP 12V DC Waterproof Relay with Harness - Heavy Duty 12 AWG Tinned Copper Wires Automotive Relay 5 Pack
Asin: B0D14RTSHC | Model: 4135484000799 | PartNumber: 4135484000799 | Ean: 4135484000799
Safety And Security: The Car Relay Base Is Made Of Plastic Material With Good Flame Resistance. Able To Protect The Vehicle And Avoid Fire In Case Of Accidental Short Circuit..
After-Sales Service:Please Do Not Use More Current Or Voltage Than The Relays Can Withstand. We Are Always Committed To Provide Quality After-Sales Service, If You Have Any Questions About The Product, Please Contact Us In Time, We Will Help You Solve It In The First Time..
4 Pin Relay Specifications: Coil Nominal Voltage: 12V Dc; Coil Power: 1.8W; Coil Resistance: 80Ω; Must Work Voltage: 6~8V Dc; Must Release Voltage: 0.6~3.6 V Dc; Maximum Applied Voltage: 15.6V Dc.
Quality Material: Dc Waterproof Relays And Wiring Harnesses Are Easy To Install And Use, Perfect For Replacing Old Relays. This 12V Relay Is Made Of Durable Composite Materials And Copper Coils For Good Conductivity And Stable Voltage. Our Automotive Relays Are Made Of Longer 12+16 Gauge Tinned Copper Wire, Which Is More Resistant To Corrosion And Oxidation Than Bare Copper Wire..
Features
- WATERPROOF RELAYS: 12v relay with harness are tightly sealed with rugged caps and seals to provide maximum protection. Waterproof, dustproof, and moisture resistant to ensure reliable performance even in harsh weather conditions. NOTE: Relay should not be used underwater.
- QUALITY MATERIAL: DC waterproof relays and wiring harnesses are easy to install and use, perfect for replacing old relays. This 12V relay is made of durable composite materials and copper coils for good conductivity and stable voltage. Our automotive relays are made of longer 12+16 gauge tinned copper wire, which is more resistant to corrosion and oxidation than bare copper wire.
- SAFETY AND SECURITY: The car relay base is made of plastic material with good flame resistance. Able to protect the vehicle and avoid fire in case of accidental short circuit.
- 4 PIN RELAY SPECIFICATIONS: coil nominal voltage: 12V DC; coil power: 1.8W; coil resistance: 80 ; must work voltage: 6~8V DC; must release voltage: 0.6~3.6 V DC; maximum applied voltage: 15.6V DC
- AFTER-SALES SERVICE:Please do not use more current or voltage than the relays can withstand. We are always committed to provide quality after-sales service, if you have any questions about the product, please contact us in time, we will help you solve it in the first time.
- See more on Amazon...
Brand: nodehawk | Manufacturer: nodehawk
Dimensions: 2.16 x 0.98 x 1.37 Inches
See On Amazon