Ophjerg - Buying Guide
Last Updated: 05/16/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
11228 L-Shape O-Ring Gasket Replacement for Intex Sand Filter Pumps Motor Seals, Pool Sand Pumps Part Hose Seals Repair Set - 6 Pack
Asin: B0CRV5QJVS | Model: 11228 | PartNumber: 11228 | Ean: 0768592410309 | UPC: 768592410309
𝐇𝐢𝐠𝐡 𝐐𝐮𝐚𝐥𝐢𝐭𝐲 𝐏𝐨𝐨𝐥 𝐆𝐚𝐬𝐤𝐞𝐭: Sand Filter Pump Gasket Is Made Of High-Quality Rubber, With High Elasticity And Strong Sealing Performance. Sturdy And Durable, Not Easy To Be Deformed Or Damaged For Long-Term Use..
𝐄𝐚𝐬𝐲 𝐭𝐨 𝐈𝐧𝐬𝐭𝐚𝐥𝐥: Replace Pool L-Shape O-Ring Gasket Is Very Easy, No Professional Skills Are Required, It Only Takes A Few Minutes To Complete. Please Turn Off The Power Of The Sand Filter Pump And Remove The Deposits On The Sand Filter Pump Motor Before Installation.).
𝐁𝐮𝐲 𝐰𝐢𝐭𝐡 𝐂𝐨𝐧𝐟𝐢𝐝𝐞𝐧𝐜𝐞: Your Satisfaction Is Our Goal. If You Have Any Questions About Our Fit For Intex Sand Filter Pump Replacement Parts 11228 L-Shape O-Rings, Please Get In Touch With Us, Whether It's Pre-Sales Or After-Sales, We Will Give You A Satisfactory Answer Within 24 Hours!.
𝐏𝐚𝐜𝐤𝐚𝐠𝐞 𝐈𝐧𝐜𝐥𝐮𝐝𝐞𝐬: Pool Sand Filter Parts 11228 Gasket, Pack Of 6 For A Great Value! Use Our Pool Seal Replace The Old, Damaged Or Lost O-Rings, Save You Time And Money..
𝐒𝐭𝐨𝐩 𝐋𝐞𝐚𝐤𝐚𝐠𝐞: If You Encounter Problems Such As Water Leakage, It Is Likely That There Is A Problem With The Gasket. Use Our Pool Pump Gasket Connection Port Between Pool Hose And Sand Filter Pump, Prevent The Leakage Of Water And Air, And Reduce The Noise And Vibration Of The Sand Filter Pump Motor, Thereby Improving The Efficiency And Performance Of Your Sand Filter Pump..
Features
- - - : 11228 Pool pump filter gaskets compatible with intex sand filter pump motors: 26323CA, 26323EH, 26331CA, 26331EH, 26337EH, 26351EH, 26351W, 26361CA, 26361EH, 26361W, 26371CA, 26371EH, 26381EH, 28643EG, 28645EG, 28647EG, 28651EG, 28946EH, 28948EH.
- : If you encounter problems such as water leakage, it is likely that there is a problem with the gasket. Use our pool pump gasket connection port between pool hose and sand filter pump, prevent the leakage of water and air, and reduce the noise and vibration of the sand filter pump motor, thereby improving the efficiency and performance of your sand filter pump.
- : Sand filter pump gasket is made of high-quality rubber, with high elasticity and strong sealing performance. Sturdy and durable, not easy to be deformed or damaged for long-term use.
- : Pool sand filter parts 11228 gasket, pack of 6 for a great value! Use our pool seal replace the old, damaged or lost o-rings, save you time and money.
- : Replace pool L-Shape O-Ring gasket is very easy, no professional skills are required, it only takes a few minutes to complete. Please turn off the power of the sand filter pump and remove the deposits on the sand filter pump motor before installation.)
- : Your satisfaction is our goal. If you have any questions about our fit for intex sand filter pump replacement parts 11228 L-Shape O-rings, please get in touch with us, Whether it's pre-sales or after-sales, we will give you a satisfactory answer within 24 hours!
- See more on Amazon...
Brand: Ophjerg | Manufacturer: Ophjerg
Dimensions: 0.50 x 1.00 x 1.00 inches
See On Amazon #2
Ophjerg 11380 Pool Filter Clamp for Intex Sand Filter Pump, Sand Filter Valve Clamp Replacement Intex 12 & 14 Inch Sand Filter- Pool Sand Filter Replacement Parts
Asin: B0CKVWGWPJ | Model: 11380 | PartNumber: 11380 | Ean: 0768592405268 | UPC: 768592405268
𝐃𝐮𝐫𝐚𝐛𝐥𝐞 𝐚𝐧𝐝 𝐋𝐨𝐧𝐠-𝐋𝐚𝐬𝐭𝐢𝐧𝐠: Constructed From High-Quality Material, Last And Withstand, The Flange Valve Clamp Is Built To Withstand The Wear And Tear Of Regular Use, Ensuring It Lasts For Years To Come..
𝐀𝐛𝐨𝐮𝐭 𝐎𝐮𝐫 𝐒𝐞𝐫𝐯𝐢𝐜𝐞: If You Have Any Questions About Our Pool Sand Filter Replacement Kit For Intex Pool Filter Parts 11380, Please Get In Touch With Us, Whether It's Pre-Sales Or After-Sales, We Will Give You A Satisfactory Answer Within 24 Hours!.
𝐅𝐢𝐭 𝐈𝐧𝐭𝐞𝐱 𝐕𝐚𝐥𝐯𝐞 𝐀𝐬𝐬𝐞𝐦𝐛𝐥𝐲: Pool Filter Clamp Replacement Kit Include Valve Clamp, Nuts, Bolts And O-Ring. Easy To Connect And Tighten. It Is Recommended That You First Tighten By Hand And Then Use A Tool To Tighten Slightly To Avoid Damaging Or Cracking The Valve Seat..
𝐂𝐨𝐦𝐩𝐚𝐭𝐢𝐛𝐥𝐞 𝐰𝐢𝐭𝐡 𝐈𝐧𝐭𝐞𝐱 𝐒𝐚𝐧𝐝 𝐅𝐢𝐥𝐭𝐞𝐫: The Sand Filter Valve Clamp Is Designed To Fit A Range Of Intex Sand Filters, Perfect Fit For Your Pool And Spa Replacement Parts.Please Note: Our Pool Clamp 7.08 Inch Across, Fits A 12 Or 14 Inch Sand Filter. The 12 And 14 Inch Measurement On This Refers To The Size Of The Sand Filter It Fits, Not The Size Of The Clamp Itself..
Features
- 11380 Sand filter clamp collar ring with screws for Intex 12 & 14 Inch sand filter pump and combo. Intex nylon flange valve clamp provides a secure and reliable seal for your sand filter, making it a versatile and adaptable solution for your filtration needs.
- : The sand filter valve clamp is designed to fit a range of Intex sand filters, perfect fit for your pool and spa replacement parts.PLEASE NOTE: our pool clamp 7.08 inch across, fits a 12 or 14 inch sand filter. The 12 and 14 inch measurement on this refers to the size of the sand filter it fits, not the size of the clamp itself.
- - : Constructed from high-quality material, last and withstand, the flange valve clamp is built to withstand the wear and tear of regular use, ensuring it lasts for years to come.
- : Pool filter clamp replacement kit include valve clamp, nuts, bolts and O-Ring. Easy to connect and tighten. It is recommended that you first tighten by hand and then use a tool to tighten slightly to avoid damaging or cracking the valve seat.
- : If you have any questions about our pool sand filter replacement kit for Intex pool filter parts 11380, please get in touch with us, whether it's pre-sales or after-sales, we will give you a satisfactory answer within 24 hours!
- See more on Amazon...
Brand: Ophjerg | Manufacturer: Ophjerg
Dimensions: 0.50 x 1.00 x 1.00 inches
See On Amazon #3
Ophjerg SF90110-1 Pool Filter Clamp for Intex Sand Filter Pump Clamp, Sand Filter Valve Clamp Replacement Intex 8 & 10 Inch Krystal Clear Sand Filter- Pool Sand Filter Replacement Parts
Asin: B0CS6H8QZ4 | Model: Pool Sand Filter Clamp | PartNumber: Pool Sand Filter Clamp | Ean: 0768592410514 | UPC: 768592410514
Fit Intex Valve Assembly: Pool Clamp Replacement Kit Include Valve Clamp, Nuts, And Bolts. Easy To Connect And Tighten. It Is Recommended That You First Tighten By Hand And Then Use A Tool To Tighten Slightly To Avoid Damaging Or Cracking The Valve Seat..
About Our Service: If You Have Any Questions About Our Pool Sand Filter Replacement Kit For Intex Pool Filter Parts, Please Get In Touch With Us, Whether It's Pre-Sales Or After-Sales, We Will Give You A Satisfactory Answer Within 24 Hours!.
Durable And Long-Lasting: Constructed From High-Quality Material, Last And Withstand, The Flange Valve Clamp Is Built To Withstand The Wear And Tear Of Regular Use, Ensuring It Lasts For Years To Come..
Compatible With Intex Sand Filter Pump: The Sand Filter Valve Clamp Is Designed To Fit A Range Of Intex Sand Filters, Perfect Fit For Your Pool And Spa Replacement Parts.Please Note: Our Pool Clamp 7.08 Inch Across, Fits A 8 Or 10 Inch Sand Filter. The 8 And 10 Inch Measurement On This Refers To The Size Of The Sand Filter It Fits, Not The Size Of The Clamp Itself..
Features
- Pool Filter Parts for Intex Sand Filter Sand filter clamp for Intex 8 & 10 Inch sand filter pump. Intex nylon flange valve clamp provides a secure and reliable seal for your sand filter, making it a versatile and adaptable solution for your filtration needs.
- Compatible with Intex Sand Filter Pump: The sand filter valve clamp is designed to fit a range of Intex sand filters, perfect fit for your pool and spa replacement parts.PLEASE NOTE: our pool clamp 7.08 inch across, fits a 8 or 10 inch sand filter. The 8 and 10 inch measurement on this refers to the size of the sand filter it fits, not the size of the clamp itself.
- Fit Intex Valve Assembly: Pool clamp replacement kit include valve clamp, nuts, and bolts. Easy to connect and tighten. It is recommended that you first tighten by hand and then use a tool to tighten slightly to avoid damaging or cracking the valve seat.
- Durable and Long-Lasting: Constructed from high-quality material, last and withstand, the flange valve clamp is built to withstand the wear and tear of regular use, ensuring it lasts for years to come.
- About Our Service: If you have any questions about our pool sand filter replacement kit for Intex pool filter parts, please get in touch with us, whether it's pre-sales or after-sales, we will give you a satisfactory answer within 24 hours!
- See more on Amazon...
Brand: Ophjerg | Manufacturer: Ophjerg
Dimensions: 0.50 x 1.00 x 1.00 inches
See On Amazon #4
SPX0710MA Sight Glass for Hayward Sand Filter Valves, Sight Replacement for Hayward Filter Valve SP0710, SP0710X, SP0711, SP0712, SP0714T, SP0715, SP0716, Pool Filter Parts Sight Bottle with Gasket
Asin: B0CR14Z3YK | Model: SPX0710MA | PartNumber: SPX0710MA | Ean: 0768592410095 | UPC: 768592410095
𝐇𝐢𝐠𝐡-𝐐𝐮𝐚𝐥𝐢𝐭𝐲 𝐒𝐢𝐠𝐡𝐭 𝐆𝐥𝐚𝐬𝐬: This Improved And Upgrade Threaded Sight Glass Are Made Of High-Quality Plastics Material. Carefully Crafted Plastics Sight Glass Is Strong And Durable, And Lasts Longer Than Glass Sight Glass. Has Clear Transparency..
𝐄𝐚𝐬𝐲 𝐈𝐧𝐬𝐭𝐚𝐥𝐥𝐚𝐭𝐢𝐨𝐧:Sight Glass Easy To Used. Just Remove The Old Sight Glass, Than Screw On The New Sight Glass. Thread Installation,You Can Put Some Tape On It To Prevent Leak..
𝐁𝐮𝐲 𝐰𝐢𝐭𝐡 𝐂𝐨𝐧𝐟𝐢𝐝𝐞𝐧𝐜𝐞: Your Satisfaction Is Our Goal! If You Have Any Questions About Our Compatible With Hayward Pool Filter Replacement Parts Sight Glass Spx0710ma, Whether It's Pre-Sales Or After-Sales, We Will Give You A Satisfactory Answer Within 24 Hours!.
𝐏𝐚𝐜𝐤 𝐢𝐧𝐜𝐥𝐮𝐝𝐞: 1 Sight Glass And 1 Gasket. Size: 2“ X 1.22”. In Order To Avoid Purchase Mistakes, Can Not Be Used Correctly, Please Check Whether The Model And Size Match, Thank You!!!.
𝐏𝐨𝐨𝐥 𝐅𝐢𝐥𝐭𝐞𝐫 𝐕𝐚𝐥𝐯𝐞 𝐒𝐢𝐠𝐡𝐭 𝐆𝐥𝐚𝐬𝐬: Use Our Clear Transparency Sight Glass Replace Broken Or Dirty Old Mirrors, To Help You Clearness Observe Sediment In The Water And Check Water Conditions..
Features
- : SPX0710MA Pool Sight Glass with Gasket, fit Hayward Pro Series Sand Filters and Top Mount Sand Filters valve. Threaded Sight Glass For Hayward 1-1/2 Inch Vari-Flo Valve Models: SP0710, SP0710X, SP0711,SP0712,SP0714T Multiports. Also Fits Hayward 2 Inch Vari-Flo Valve Models: SP0715 and SP0716 Multiports Series.
- : Use our clear transparency Sight Glass Replace broken or dirty old mirrors, to help you clearness observe sediment in the water and check water conditions.
- - : This Improved and upgrade Threaded Sight Glass are Made of high-quality plastics material. carefully crafted plastics Sight Glass is strong and durable, and lasts longer than Glass Sight Glass. has clear transparency.
- : 1 Sight Glass and 1 Gasket. Size: 2 X 1.22 . In order to avoid purchase mistakes, can not be used correctly, please check whether the model and size match, Thank you!!!
- :Sight Glass easy to used. Just remove the old Sight Glass, than screw on the new Sight Glass. Thread installation,you can put some tape on it to prevent leak.
- : Your satisfaction is our goal! If you have any questions about our compatible with Hayward Pool filter replacement parts Sight Glass SPX0710MA, whether it's pre-sales or after-sales, we will give you a satisfactory answer within 24 hours!
- See more on Amazon...
Brand: Ophjerg | Manufacturer: Ophjerg
Dimensions: 0.50 x 1.00 x 1.00 inches
See On Amazon #5
Hose Bib Adapter 1-1/16 Inch Fine Thread Hose Adapter (Female) Vacuum Breaker Adapter Compatible with Arrowhead Hose Bib, Brass Adapter Fit 3/4 GHT Male Garden Hoses to 1 Inch Hose Bib Outdoor Faucet
Asin: B0C3D2NBPD | Model: HP1116 | PartNumber: HP1116 | Ean: 0768592401307 | UPC: 768592401307
High Quality Heavy Duty : Our Hose Bib Adapter Is Made Using Solid Brass That’S Impact Resistant And Zinc Galvanized To Offer Protection Against Rust And Corrosion..
Easy To Install : For Arrowhead Spigots When You Can Remove The Entire Vacuum Breaker. Fine Threads Are 1" In Diameter. This Is The Vacuum Breaker That Fixes Leaks Once And For All!.
Perfect After-Sales Service---We Provide High Quality After-Sales Services. If The Hose Bib Adapter Does Not Meet Your Requirements, It Can Be Replaced, So You Can Rest Assured Of Your Purchase. If There Is Any Problem, Please Contact Us In Time..
Fix The Following Symptoms：These Hose Bib Adapters Replace Garden Hose Connections.，Repairs Low Flow Due To The Limitation Of The Arrow Brand Anti-Siphon Device, In Which Case, No Anti-Siphon Part Is Required, Just Replace This Adapter To Get Almost Twice The Water Flow (Gpm) From The Same Hose. 1.Eliminate Water Restriction，2.Increase Pressure & Flow，3.Fixes The Leak.
Fine Thread Hose Adapter : 1-1/16" Fine Thread (Female).
Features
- Hose Bib Adapter: Adapter replaces the anti-siphon device on Arrowhead Brand hose bib only.
- Fine Thread Hose Adapter : 1-1/16 Fine Thread (female)
- High Quality Heavy Duty : Our Hose Bib Adapter Is Made Using Solid Brass That S Impact Resistant And Zinc Galvanized To Offer Protection Against Rust And Corrosion.
- Fix The Following Symptoms These hose bib adapters replace garden hose connections. Repairs low flow due to the limitation of the Arrow brand anti-siphon device, in which case, no anti-siphon part is required, just replace this adapter to get almost twice the water flow (gpm) from the same hose. 1.Eliminate water restriction 2.Increase Pressure & Flow 3.Fixes the leak
- Easy to install : For Arrowhead Spigots When You Can Remove the Entire Vacuum Breaker. Fine Threads are 1 in Diameter. This is the vacuum breaker that fixes leaks once and for all!
- Perfect After-Sales Service---We provide high quality after-sales services. If the hose bib adapter does not meet your requirements, it can be replaced, so you can rest assured of your purchase. If there is any problem, please contact us in time.
- See more on Amazon...
Brand: Ophjerg | Manufacturer: Ophjerg
Dimensions: 1.00 x 1.00 x 1.00 Inches
See On Amazon #6
A01372A Fuel Gas Cap with Built-in Primer Bulb Fit for Homelite XL XL-2 Super 2 VI Super 2 180 190 192 200 LX30 240 Super 240 Chainsaws UP05955
Asin: B08PVVNFWK | Ean: 0782912651074 | UPC: 782912651074
Upgraded Version: This Fuel Cap Is A New Replacement Part For The Homelite Fuel Cap With A Built-In Primer Bulb. It Replaces The Discontinued / Obsolete Homelite Fuel Cap With A Primer Bulb..
Kindly Note: Please Note That This Is Not An Oem Or The Original Part Because They Are Discontinued. Changta Inlet( 7/64) Is Smaller Than The Oem So You Might Need To Snip The Tip Of Your Old Fuel Line Or Replace Your Fuel Line..
Fuel Cap Dimensions: Od(Outside Diameter): 1-3/8”; Id(Inside Diameter): 1-1/4”; H(Height From Bottom Of Cap To Top Of Primer Bulb): 1-1/4”. Package Content: Fuel Gas Cap With Primer Bulb X 1..
Model Number: Fuel Gas Cap Fits For Homelite Xl, Xl-2, Xl2, Super 2, Vi Super 2, 180, 190, 192, 200, Lil Red, Lx30, 240, Super 240 And More Chainsaws..
Features
- Perfect Fit: Chainsaw Fuel Gas Cap fit for Homelite fuel cap with built-in primer bulb part, It replaces the original part numbers. Replaces Part Number: A01372A, UP05955.
- Model Number: Fuel Gas Cap Fits for Homelite XL, XL-2, XL2, Super 2, VI Super 2, 180, 190, 192, 200, LIL RED, LX30, 240, Super 240 and more chainsaws.
- Upgraded Version: This fuel cap is a new replacement part for the Homelite fuel cap with a built-in primer bulb. It replaces the discontinued / obsolete Homelite fuel cap with a primer bulb.
- Fuel Cap Dimensions: OD(Outside Diameter): 1-3/8 ; ID(Inside Diameter): 1-1/4 ; H(Height from bottom of cap to top of primer bulb): 1-1/4 . Package Content: Fuel Gas Cap with Primer Bulb x 1.
- Kindly Note: Please note that this is not an OEM or the Original Part because they are discontinued. ChangTa inlet( 7/64) is smaller than the OEM so you might need to snip the tip of your old fuel line or replace your fuel line.
- See more on Amazon...
Brand: Ophjerg | Manufacturer: Ophjerg
See On Amazon #7
Pool Hoses Adapter for Above Ground Pools Filter Pump Hose, Type B Adapter Connect 1.5" Hose to 1.25" Pool Valves, Above Ground Pool Accessories Compatible with INTEX Pumps & Saltwater System - 2 Pack
Asin: B0CRV6DRH3 | Model: 10722 | PartNumber: 10722 | Ean: 0768592410248 | UPC: 768592410248
𝐖𝐢𝐝𝐞𝐥𝐲 𝐂𝐨𝐦𝐩𝐚𝐭𝐢𝐛𝐥𝐞: Hose Adapters Compatible With Different Brands Of Hoses, Pumps, And Above Ground Pools. These Pool Drain Hose Adapters Will Work For You..
𝐄𝐚𝐬𝐲 𝐭𝐨 𝐈𝐧𝐬𝐭𝐚𝐥𝐥: The Hose Adapters Are Easy-To-Fit With Their Deep Grooves, No Professional Skills Are Required, It Only Takes A Few Minutes To Complete. Hose Connector Kit Inclued 2 Pack Hose Adapter..
𝐁𝐮𝐲 𝐰𝐢𝐭𝐡 𝐂𝐨𝐧𝐟𝐢𝐝𝐞𝐧𝐜𝐞: Your Satisfaction Is Our Goal! If You Have Any Questions About Our Above Ground Pool Accessories Sand Filter Pump Hose Adapter B, Please Get In Touch With Us, Whether It's Pre-Sales Or After-Sales, We Will Give You A Satisfactory Answer Within 24 Hours!.
𝐇𝐢𝐠𝐡 𝐐𝐮𝐚𝐥𝐢𝐭𝐲: The Above Ground Pool Hose Adapters Are Made Of High Quality Material, Which Makes The Connection Tight Fit, Not Easy To Leak. Pool Pump Adapters Is Resistant To Salt Water Corrosion-Proof, And Sun Uv Light, Corrosion-Proof, So They Can Last For Many Years..
𝐏𝐨𝐨𝐥 𝐇𝐨𝐬𝐞 𝐀𝐝𝐚𝐩𝐭𝐞𝐫 𝐟𝐨𝐫 𝐈𝐧𝐭𝐞𝐱 𝟏𝟎𝟕𝟐𝟐 𝐀𝐝𝐚𝐩𝐭𝐞𝐫 𝐁: Required When Upgrading A 1000 Gph Or Smaller Pump To A 1500 Gph Or Larger Pump. This Pair Of Hose Conversion Adapters Converts Pools Connect 1.5 Inch Diameter Outlet Hoses To Pool 1.25 Inch Diameter Inlet Valves..
Features
- : These pool hose adapters type b hose adapters are a simple and effective way to give smaller pools larger pumping power by enabling more powerful filter pumps to connect to smaller pools, improving the flow of clean water. A must-have above ground pool accessories for upgrade smaller pools.
- : Required when upgrading a 1000 GPH or smaller pump to a 1500 GPH or larger pump. This pair of hose conversion adapters converts pools connect 1.5 inch diameter outlet hoses to pool 1.25 inch diameter inlet valves.
- : Hose Adapters compatible with different brands of hoses, pumps, and above ground pools. These pool drain hose adapters will work for you.
- : The above ground pool hose adapters are made of high quality material, which makes the connection tight fit, not easy to leak. Pool pump adapters is resistant to salt water corrosion-proof, and sun UV light, corrosion-proof, so they can last for many years.
- : The hose adapters are easy-to-fit with their deep grooves, no professional skills are required, it only takes a few minutes to complete. Hose connector kit inclued 2 pack hose adapter.
- : Your satisfaction is our goal! If you have any questions about our above ground pool accessories sand filter pump hose adapter b, please get in touch with us, Whether it's pre-sales or after-sales, we will give you a satisfactory answer within 24 hours!
- See more on Amazon...
Brand: Ophjerg | Manufacturer: Ophjerg
Dimensions: 0.49 x 1.00 x 1.00 inches
See On Amazon #8
9-100-1132 Drive Train Gear Kit for Zodiac Polaris 360, 380, Vac-Sweep 360 & 380 Pool Cleaner, Pool Cleaner Drive Gear Rebuild Replacement Parts with Turbine Bearing
Asin: B0CJTW15D7 | Model: 9-100-1132 | PartNumber: 9-100-1132 | Ean: 0768592405206 | UPC: 768592405206
𝐏𝐞𝐫𝐟𝐞𝐜𝐭 𝐅𝐢𝐭 𝐏𝐨𝐥𝐚𝐫𝐢𝐬: Fit Polaris Pool Cleaner Parts Are Made Of High-Quality Nylon Material, Which Is Strong And Durable, And Lasts Longer. Upgrades Gear Construction, Perfect Fit Your Zodiac Pool Cleaner, If You Have The Polaris 360 Or Polaris 380 Then This Will Fit Perfect..
𝐄𝐚𝐬𝐲 𝐭𝐨 𝐈𝐧𝐬𝐭𝐚𝐥𝐥: Easy To Swap Old For New With A Phillips And Flat Head Screw Driver. Easy Installation Can Be Completed In Under 10 Minutes With Minimal Experience. (Youtube Videos On Full Teardown/Rebuild That Can Help You. ).
𝐁𝐮𝐲 𝐰𝐢𝐭𝐡 𝐂𝐨𝐧𝐟𝐢𝐝𝐞𝐧𝐜𝐞: Your Satisfaction Is Our Goal.If You Have Any Questions About Our Pool Cleaner Drive Train Part For Polaris Drive Train Gear Kit 9-100-1132, Please Get In Touch With Us, Whether It's Pre-Sales Or After-Sales, We Will Give You A Satisfactory Answer Within 24 Hours!.
𝐏𝐚𝐜𝐤𝐚𝐠𝐞 𝐂𝐨𝐧𝐭𝐞𝐧𝐭: Drive Train Gear Replacement Kit: Everything Your Needed To Repair The Polaris Turbine Assembly Is Includes, Bearing, Gear, Clips..
𝐐𝐮𝐢𝐜𝐤 𝐂𝐥𝐞𝐚𝐧𝐢𝐧𝐠: If Your Polaris Pool Cleaner Lost It's Wall Climbing Ability, Stuck, Slowly, Stopping, Make Grating Sounds, Replaced The Turbine Gear Set Now. After Using It, You Will Clearly Find, Drive Train Will Give Polaris Maximum Forward Motion, Speed Up The Cleaning Time While Ensuring The Shining Level. Save Your Time And Energy..
Features
- : 9-100-1132 Drive Train Gear Replacement parts for polaris 360/380 Pool Cleaner. This drive train gear kit is designed to use with zodiac Polaris Automatic pool cleaner model 360, 380 and also compatible with Polaris cleaner models Vac-Sweep 360, Vac-Sweep 380.
- : If your Polaris pool cleaner lost it's wall climbing ability, stuck, slowly, stopping, make grating sounds, Replaced the turbine gear set now. After using it, you will clearly find, drive train will give polaris maximum forward motion, speed up the cleaning time while ensuring the shining level. Save your time and energy.
- : Fit Polaris Pool Cleaner Parts are made of high-quality nylon material, which is strong and durable, and lasts longer. upgrades gear construction, Perfect fit your zodiac Pool Cleaner, If you have the Polaris 360 or Polaris 380 then this will fit perfect.
- : Drive train gear replacement kit: Everything your needed to repair the polaris turbine assembly is includes, bearing, gear, clips.
- : Easy to swap old for new with a phillips and flat head screw driver. Easy installation can be completed in under 10 minutes with minimal experience. (YouTube videos on full teardown/rebuild that can help you. )
- : Your Satisfaction is our goal.If you have any questions about our pool cleaner drive train part for Polaris drive train gear Kit 9-100-1132, please get in touch with us, Whether it's pre-sales or after-sales, we will give you a satisfactory answer within 24 hours!
- See more on Amazon...
Brand: Ophjerg | Manufacturer: Ophjerg
Dimensions: 1.00 x 1.00 x 1.00 inches
See On Amazon #9
Ophjerg Steering Rod Bushing for Cub Cadet MTD LT1050 SLT1550 SLT1554 GT1554 GT254
Asin: B08P8GLWTN | Ean: 0782912642171 | UPC: 782912642171
Compatible With The Following Models: Ryobi:13Ad678g034, 13An688g034, 31Ae162-013, 31Ae162-034, 31Ae660f013, 31Ae660g034, 31Ae6q0f034.
Mtd: 13An772g200, 13Ac650f700, 13Ad685g700, 13Ad688g722.
Yard Machines: 13Ac762f000, 13Al771h029, 13Am772f000, 13An772g000, 13Am772f700, 13An772g700, 13A1762f700, 13A3762f700, 13A1760f700, 13A3760f700, 13A3761g700, 13A3771g700, 13A3791g700, 13Ac650f000, 13Ad685g000.
Fits Models: Lawn Mowers, Snowthrowers / Snow Blowers, Log Splitters, And Utility Vehicl.
Features
- Includes (2) Bushings. New.
- Fits Models: Lawn Mowers, Snowthrowers / Snow Blowers, Log Splitters, and Utility Vehicl
- Compatible With The Following Models: Ryobi:13AD678G034, 13AN688G034, 31AE162-013, 31AE162-034, 31AE660F013, 31AE660G034, 31AE6Q0F034
- Yard Machines: 13AC762F000, 13AL771H029, 13AM772F000, 13AN772G000, 13AM772F700, 13AN772G700, 13A1762F700, 13A3762F700, 13A1760F700, 13A3760F700, 13A3761G700, 13A3771G700, 13A3791G700, 13AC650F000, 13AD685G000
- MTD: 13AN772G200, 13AC650F700, 13AD685G700, 13AD688G722
- See more on Amazon...
Brand: Ophjerg | Manufacturer: Ophjerg
Dimensions: 0.30 x 1.90 x 1.10 inches
See On Amazon #10
Ophjerg 550-0240B Drain Plug Cap for Pool and Spa Filter, Pool Pump or Filter Drain Cap with O-Ring Gasket Same as 550-0240
Asin: B0CR183TCC | Model: 550-0240B | PartNumber: 550-0240B | Ean: 0768592410217 | UPC: 768592410217
𝐏𝐚𝐜𝐤 𝐈𝐧𝐜𝐥𝐮𝐝𝐞𝐬: Pool Filter Replacement Kit Includes Cap And Gasket. Size: 1.3“ L X 1.3” W X 0.7“ D. In Order To Avoid Purchase Mistakes, Can Not Be Used Correctly, Please Check Whether The Model And Size Match, Thank You! !!.
𝐄𝐚𝐬𝐲 𝐈𝐧𝐬𝐭𝐚𝐥𝐥𝐚𝐭𝐢𝐨𝐧: 550-0240B Drain Cap Used To Repair Pool Filter, Installs In Just Minutes. Both Inside And Outside Are Designed With Fine And Clear Grooves To Increase Friction And Facilitate The Installation Of Sand Filters, Which Are Also Not Easy To Fall Off..
𝐁𝐮𝐲 𝐰𝐢𝐭𝐡 𝐂𝐨𝐧𝐟𝐢𝐝𝐞𝐧𝐜𝐞: Your Satisfaction Is Our Goal! If You Have Any Questions About Our Pool Filter Drain Plug Cap 550-0240B, Whether It's Pre-Sales Or After-Sales, We Will Give You A Satisfactory Answer Within 24 Hours!.
𝐃𝐮𝐫𝐚𝐛𝐥𝐞 𝐚𝐧𝐝 𝐋𝐨𝐧𝐠-𝐥𝐚𝐬𝐭𝐢𝐧𝐠: 550-0240B Pool Sand Filter Drain Cap, Made Of High-Quality Plastic Material, Carefully Crafted With A Smooth Surface That Is Not Easily Broken Or Deformed, It Can Withstand The Effects Of Various Factors And Last For Years..
𝐏𝐨𝐨𝐥 𝐅𝐢𝐥𝐭𝐞𝐫 𝐃𝐫𝐚𝐢𝐧 𝐂𝐚𝐩 : 550-0240B Is The Same As 550-0240, Old Part Number 519-0230 Stamped On Cap, Also Replace Part 5190230、5500240、17-270-1127、Ww5500240b、Wwp550-0240..
Features
- : 550-0240B pool filter drain cap compatible with Pro Clean Filter Series. Use our drain cap to say goodbye to leaks and clogs. This threaded cap fits on various standard drain valves, most notably the 1/2-inch valve.
- : 550-0240B is the same as 550-0240, Old part number 519-0230 stamped on cap, also replace part 5190230 5500240 17-270-1127 WW5500240B WWP550-0240.
- : Pool filter replacement kit includes Cap and gasket. Size: 1.3 L X 1.3 W X 0.7 D. In order to avoid purchase mistakes, can not be used correctly, please check whether the model and size match, Thank you! !!
- - : 550-0240B pool sand filter drain cap, Made of high-quality plastic material, carefully crafted with a smooth surface that is not easily broken or deformed, it can withstand the effects of various factors and last for years.
- : 550-0240B drain cap used to repair pool filter, Installs in just minutes. both inside and outside are designed with fine and clear grooves to increase friction and facilitate the installation of sand filters, which are also not easy to fall off.
- : Your satisfaction is our goal! If you have any questions about our pool filter drain plug cap 550-0240B, whether it's pre-sales or after-sales, we will give you a satisfactory answer within 24 hours!
- See more on Amazon...
Brand: Ophjerg | Manufacturer: Ophjerg
Dimensions: 0.50 x 1.00 x 1.00 inches
See On Amazon #11
Ophjerg 9995266-R1 Impeller with Screw for Dolphin Maytronics Nautilus CC Plus Parts M200/M400/M500,Compatible with Nautilus Series DX6, S200/S300/S300i,Fits Automatic Pool Cleaner Replacement Parts
Asin: B0CQRDBFP4 | Model: 9995266-R1 | PartNumber: 9995266-R1 | Ean: 0768592409914 | UPC: 768592409914
𝐏𝐞𝐫𝐟𝐞𝐜𝐭 𝐟𝐢𝐭 𝐃𝐨𝐥𝐩𝐡𝐢𝐧: Fit Dolphin Pool Cleaner Parts Are Made Of High-Quality Nylon Material, Which Is Strong And Durable, And Lasts Longer. Perfect Fit Your Dolphine Nautilus, Nautilus Cc Plus, Active, Triton, Oasis Cleaner. Pack Include 1 X Impeller, 1 X Screw..
𝐁𝐮𝐲 𝐰𝐢𝐭𝐡 𝐂𝐨𝐧𝐟𝐢𝐝𝐞𝐧𝐜𝐞: Your Satisfaction Is Our Goal.If You Have Any Questions About Our Compatibility With Dolphin Pool Cleaner Parts Replacement Impeller 9995266-R1, Please Get In Touch With Us, Whether It's Pre-Sales Or After-Sales, We Will Give You A Satisfactory Answer Within 24 Hours!.
𝐄𝐚𝐬𝐲 𝐭𝐨 𝐈𝐧𝐬𝐭𝐚𝐥𝐥: Easy To Swap Old For New With A Phillips Or Flat Head Screw Driver. Easy Installation Can Be Completed In Under 10 Minutes With Minimal Experience..
𝐐𝐮𝐢𝐜𝐤 𝐂𝐥𝐞𝐚𝐧𝐢𝐧𝐠: If Your Dolphine Pool Cleaner Lost It's Wall Climbing Ability, Stuck, Slowly, Stopping, Make Grating Sounds, Replaced The Impeller Kit Now. After Using It, You Will Clearly Find, Drive Train Will Give Dolphine Maximum Forward Motion, Speed Up The Cleaning Time While Ensuring The Shining Level. Save Your Time And Energy..
Features
- : Impeller for Dolphine robotic pool vacuum cleaner, Part Number: 9995266-R1. This impeller with screw are designed to use with Dolphine automatic pool cleaner. Replace models: M200/M400/M500, Nautilus, DX6, DX5S, S200/S300/S300i, Active 10/20/30/30i, T15/T35/T45/T55i, E10, Nautilus CC Plus, Triton PS/PSPlus, Nautilus CC, Oasis Z5i, C3/C4.
- : If your Dolphine pool cleaner lost it's wall climbing ability, stuck, slowly, stopping, make grating sounds, replaced the impeller kit now. After using it, you will clearly find, drive train will give Dolphine maximum forward motion, speed up the cleaning time while ensuring the shining level. Save your time and energy.
- : Fit Dolphin pool cleaner parts are made of high-quality nylon material, which is strong and durable, and lasts longer. Perfect fit your Dolphine Nautilus, Nautilus CC Plus, Active, Triton, Oasis cleaner. Pack include 1 x Impeller, 1 x Screw.
- : Easy to swap old for new with a phillips or flat head screw driver. Easy installation can be completed in under 10 minutes with minimal experience.
- : Your Satisfaction is our goal.If you have any questions about our compatibility with Dolphin pool cleaner parts replacement impeller 9995266-R1, please get in touch with us, Whether it's pre-sales or after-sales, we will give you a satisfactory answer within 24 hours!
- See more on Amazon...
Brand: Ophjerg | Manufacturer: Ophjerg
Dimensions: 0.50 x 1.00 x 1.00 inches
See On Amazon #12
GMX600NM Valve Clamp Replacement for Hayward ProSeries Sand Filter Pump Clamp, Pool Filter Clamp Replacement Hayward Sand Filter Model Parts S144T,S164T S166T S180T S210T S210S S220T S230T S244T
Asin: B0CJT95BKP | Model: GMX600NM | PartNumber: GMX600NM | Ean: 0768592405176 | UPC: 768592405176
Fits Hayward Pool Clamp : Pool Filter Parts Compatible With Hayward Pro-Series Sand Filter Pump The Following Models, S144t, S164t, S166t, S180t, S210t, S210s, S220t, S220t2, S230t, S244t, S244t2, S244s, S270t, S310t, And S360t For Hayward Above Ground , In Ground Pools Filter ..
Sand Filter Replacement Parts For Hayward Sand Filter: Gmx600nm Flange Valve Clamp Kit Include Valve Clamp,Nuts And Bolts.Easy To Connect And Tighten .It Is Recommended That You First Tighten By Hand And Then Use A Tool To Tighten Slightly To Avoid Damaging Or Cracking The Valve Seat..
Buy With Confidence: If You Have Any Questions About Our Pool Replacement Parts For Hayward Pool Sand Filter, Please Get In Touch With Us, Whether It's Pre-Sales Or After-Sales, We Will Give You A Satisfactory Answer Within 24 Hours!.
Replace Hayward Sand Filter Parts : Our Valve Clips Are Made Of Heavy Duty Durable Plastic Material. Very Solid Construction. Keep Your Sand Filter In Top Condition By Replacing Worn Valve Clips! This Simple Valve Clamp Will Save You Expensive Repairs..
Please Note: In Order To Avoid Purchase Mistakes, Can Not Be Used Correctly, So Please Pay Attention To Check Our List Of Compatible Models, Thank You! Please Confirm The Size Before Purchasing(Refer To Figure 2), Our Pool Sand Filter Clamp Is Only Suitable For Hayward Series Models, It Can Fit 8 To 8.5-Diameter Sand Filter, This Sand Filter Clamp Is Not Suitable For 12-Inch Pool Sand Pump..
Features
- Pool Filter Clamp GMX600NM : Sand filter pump clamp fits Hayward pro series sand filter S144T and other sand filter valve clamp models . Notice This clamp will NOT work on Bestways or Intex Filters.It only applies to Hayward.
- Please Note: In order to avoid purchase mistakes, can not be used correctly, so please pay attention to check our list of compatible models, thank you! Please confirm the size before purchasing(refer to Figure 2), our pool sand filter clamp is only suitable for Hayward series models, it can fit 8 to 8.5-diameter sand filter, this sand filter clamp is not suitable for 12-inch pool sand pump.
- Fits Hayward Pool Clamp : Pool filter parts compatible with hayward Pro-Series Sand filter pump the following models, S144T, S164T, S166T, S180T, S210T, S210S, S220T, S220T2, S230T, S244T, S244T2, S244S, S270T, S310T, and S360T for hayward above ground , in ground pools filter .
- Replace Hayward Sand Filter Parts : Our valve clips are made of heavy duty durable plastic material. Very solid construction. Keep your sand filter in top condition by replacing worn valve clips! This simple valve clamp will save you expensive repairs.
- Sand Filter Replacement Parts for Hayward Sand Filter: GMX600NM flange valve clamp kit include valve clamp,Nuts and Bolts.Easy to connect and tighten .It is recommended that you first tighten by hand and then use a tool to tighten slightly to avoid damaging or cracking the valve seat.
- Buy with Confidence: If you have any questions about our pool replacement parts for Hayward pool sand filter, please get in touch with us, Whether it's pre-sales or after-sales, we will give you a satisfactory answer within 24 hours!
- See more on Amazon...
Brand: Ophjerg | Manufacturer: Ophjerg
Dimensions: 0.50 x 1.00 x 1.00 inches
See On Amazon #13
Ophjerg Pool Hose Connector for Intex Parts 10744 Threaded Strainer Connector Compatible with 26341W, 26345W, 26375EH, 26761EH, 28345VM, 28952EH, 28961EH
Asin: B0C3D47YF8 | Model: intex 10744 | PartNumber: intex 10744 | Ean: 0768592401215 | UPC: 768592401215
Pool Hose Connector Replacement Part: Plunger Valves Install In The Side Of Your Intex Pool And Connect With Your Intex Hose Fitings. Pool Threaded Strainer Connector Kit Work With Pool Plunger Valves Tightly, Used To Make A Connection Work From The Intex Pool Pump To Stock Tank Pool!.
Buy With Confidence --- Your Satisfaction Is Our Goal.If You Have Any Questions About Our Compatibility With Intex Parts 10744 Strainer Connector, Please Get In Touch With Us, Whether It's Pre-Sales Or After-Sales, We Will Give You A Satisfactory Answer Within 24 Hours!.
High Quality Material --- Our Pool Strainer Connector Hose Adapter Are Made Of High Quality Plastic Materials, Which Is Sturdy, Durable And Lasts Longer. Save Your Money And Time..
Perfectly Compatible Pool Replacement Part --- Pool Strainer Connector Compatible With Intex Pools Replace 26341W, 26345W, 26375Eh, 26761Eh, 28345Vm, 28952Eh, 28961Eh. Pool Replacement Parts Includes 1* Pool Strainer Connector 10744..
Features
- Strainer Connector for Intex Pool --- Threaded strainer connector Kit designed for Intex above ground swimming pool filtration systems, pool strainer adapter kit connected with large inlet air nozzle and plunger valve to form a sealed space to prevent leak. Better Circulate water through your pool with the help of this pool inlet and outlet jet kit. High Efficiency Filtration.
- Perfectly Compatible Pool Replacement Part --- Pool strainer connector Compatible with Intex pools replace 26341W, 26345W, 26375EH, 26761EH, 28345VM, 28952EH, 28961EH. Pool replacement parts includes 1* pool strainer connector 10744.
- Pool Hose Connector Replacement Part: Plunger valves install in the side of your Intex pool and connect with your Intex hose fitings. Pool threaded strainer connector kit work with pool plunger valves tightly, Used to make a connection work from the Intex pool pump to stock tank pool!
- High Quality Material --- Our pool strainer connector hose adapter are made of high quality plastic materials, which is sturdy, durable and lasts longer. Save your money and time.
- Buy with Confidence --- Your Satisfaction is our goal.If you have any questions about our compatibility with Intex parts 10744 Strainer Connector, please get in touch with us, Whether it's pre-sales or after-sales, we will give you a satisfactory answer within 24 hours!
- See more on Amazon...
Brand: Ophjerg | Manufacturer: Ophjerg
Dimensions: 1.00 x 1.00 x 1.00 inches
See On Amazon #14
Male To Male Hose Adapter Stainless Steel Garden Hose Adapter Convert To Npt Sus304, Male Garden Hose X 3/4
Asin: B08SJ74RK2 | Model: NPT SUS304 | PartNumber: NPT SUS304 | Ean: 0782912642249 | UPC: 782912642249
Garden Hose Adapters Are Used To Convert From National Pipe Taper To Standard Us Garden Hose Connections. Use These Fittings To Convert Your Garden Hose Connections To Npt Fittings On Pipe, Plate Heat Exchangers, And Other Pipe Threads That Would Not Normally Allow Easy Connection Of Garden Hoses..
Stainless Steel Fittings Are More Resistant To Corrosion Than Other Metal Fittings（ Such As Brass）And Are More Resistant To Breakage And Misthreads. Use These Fittings For Long-Lasting Applications..
Quick Disconnect Fittings Provide Simple Connect And Disconnect Options For Garden Hose To Garden Hose Threaded Connections Such As Garden Hose Jacks.
The Female Garden Hose X Male Npt Adapter Is Tapped On The 3/4" Male Npt Side With 1/2" Female Npt Threads And Converts To Female Garden Hose Threads..
Features
- Package includes 1 piece of new garden hose adapter
- The female garden hose x Male NPT adapter is tapped on the 3/4 male NPT side with 1/2 Female NPT threads and converts to female garden hose threads.
- Garden Hose Adapters are used to convert from National Pipe Taper to standard US garden hose connections. Use these fittings to convert your garden hose connections to NPT fittings on pipe, plate heat exchangers, and other pipe threads that would not normally allow easy connection of garden hoses.
- Quick disconnect fittings provide simple connect and disconnect options for garden hose to garden hose threaded connections such as garden hose jacks
- Stainless steel fittings are more resistant to corrosion than other metal fittings such as brass and are more resistant to breakage and misthreads. Use these fittings for long-lasting applications.
- See more on Amazon...
Brand: Ophjerg | Manufacturer: Ophjerg
Dimensions: 1.14 x 3.03 x 1.97 inches | Weight: 0.00 pounds
See On Amazon #15
Ophjerg A20 Float Head for Polaris Zodiac Pool Cleaner Replacement Parts# EA20 180 280 360 380 - White (2)
Asin: B0B3CNBQ7S | Ean: 0782912647350 | UPC: 782912647350
Compatibility : Pentair Kreepy Krauly, Legend Ii, Legend 4-Wheel, Legend 3-Wheel Pool And Spa Cleaner Models Ll105, Ll105, Lx 2000, Ll505g, Ll505gg, Lx5000g, Lx5000gg.- Also Compatible With Pentair Polaris, Legend Platinum, Legend Platinum Truck Series Pool And Spa Cleaner Models Ll105pm, Ll105pmt.
High - Quality : Made Of High-Quality Material To Ensure A Proper Fit And No Leaking. It Has A Hole On Each End. For Your Cleaner To Work Properly, We Recommend Regular Replacement, This A20 Float Head ..
Easy To Install And Use : Direct Replacement For Your Polaris A20 Float Head. First Unscrew The Old Float Head, Then Screw The New Float Head Onto The Feed Tube. Please Install From The Correct Direction.We Have Increased The Rotation Fusion Depth And The Leaking Problem Will Be Improved. It Is Exactly What You Need For Your Pool Cleaner..
Head Float Replacement Parts : This A20 Float Head Compatible With Zodiac Polaris Pool Cleaner Models 380, 360, 280, 180. - Also Fits Zodiac Polaris Pool Cleaner Models Vac-Sweep 380, Vac-Sweep 360, Vac-Sweep 280, 280 Tanktrax..
Features
- Fits Polaris Float : Head Float For Polaris and Pentair, Letro Pressure Pool Cleaners , Part# A20.
- Head Float Replacement Parts : This A20 Float Head Compatible with Zodiac Polaris pool cleaner models 380, 360, 280, 180. - Also fits Zodiac Polaris pool cleaner models Vac-Sweep 380, Vac-Sweep 360, Vac-Sweep 280, 280 TankTrax.
- Compatibility : Pentair Kreepy Krauly, Legend II, Legend 4-Wheel, Legend 3-Wheel pool and spa cleaner models LL105, LL105, LX 2000, LL505G, LL505GG, LX5000G, LX5000GG.- Also Compatible with Pentair Polaris, Legend Platinum, Legend Platinum Truck Series pool and spa cleaner models LL105PM, LL105PMT
- Easy to install and Use : Direct replacement for your Polaris A20 Float Head. First unscrew the old float head, then screw the new float head onto the feed tube. Please install from the correct direction.We have increased the rotation fusion depth and the leaking problem will be improved. It is exactly what you need for your pool cleaner.
- High - Quality : Made of high-quality material to ensure a proper fit and no leaking. It has a hole on each end. For your cleaner to work properly, we recommend regular replacement, this A20 Float Head .
- See more on Amazon...
Brand: Ophjerg | Manufacturer: Ophjerg
See On Amazon