Pmd Products - Buying Guide
Last Updated: 04/26/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
PMD Products 17pc Axle Wheel Puller 5lb Slide Hammer Internal External Puller Hub Puller
Asin: B00G1RXFVM
5Lb. Slide Hammer, 425Mm Long, 5/8"Unf Thread.
Dent Puller Screws (Large And Small), Supplied In Blow Mold Storage Case..
Front Hub Puller, Rear Axle Puller, Locknut Cone.
Features: Internal And External Three Leg And Two Leg Jaw Puller Yokes..
Features
- Ideal for internal and external pulling on bearing cups, stubborn oil seals, Bushings, and many press fitted parts.
- Features: Internal and External Three Leg and Two Leg jaw puller yokes.
- 5lb. Slide Hammer, 425mm long, 5/8UNF thread
- Front Hub puller, Rear Axle puller, Locknut Cone
- Dent puller screws (large and small), Supplied in blow mold storage case.
- See more on Amazon...
Brand: PMD Products | Manufacturer: PMD Products
Weight: 10.00 pounds
See On Amazon #2
PMD Products Shifter Seal fits GM Transmission Turbo 350 400 425 700-R4 TH200 TH325 4L60 4L80E 6L80E AT540 MT640
Asin: B01BCQAGFE | Model: 250 | PartNumber: 250
Fits Allison At540 At542 At543 At545 At1545 Mt640 Mt643 Mt644 Mt647 Mt650 Lct1000 Lct2000 Lt2400.
Only 1 Seal Required Per Transmission.
Metal Clad Shifter Gear Selector Rod Seal , 0.752 Inch Outside X 0.501 Inch Inside Diameter..
Fits Gm 200, 200C, 200-4R Turbo 350, 350C Turbo 400, 425, 475 Gm 700-R4 Gm 4L60 4L65e 4L70e 4L80e 4L85e 6L45e 6L50e 6L80e 6L90e 8L90e.
Features
- Seal is mandatory to stop the fluid leakage around the shifter selector shaft mechanism through the transmission case.
- Fits GM 200, 200C, 200-4R TURBO 350, 350C TURBO 400, 425, 475 GM 700-R4 GM 4L60 4L65E 4L70E 4L80E 4L85E 6L45E 6L50E 6L80E 6L90E 8L90E
- Fits Allison AT540 AT542 AT543 AT545 AT1545 MT640 MT643 MT644 MT647 MT650 LCT1000 LCT2000 LT2400
- metal clad shifter gear selector rod seal , 0.752 inch outside X 0.501 inch inside diameter.
- Only 1 seal required per transmission
- See more on Amazon...
Brand: PMD Products | Manufacturer: PMD Products
Dimensions: 1.00 x 1.00 x 1.00 Inches
See On Amazon #3
PMD Products Solid Rubber Auto Lift Block Spacer Pad 6-3/8" x 4-3/4" x 2" (160mm x 120mm x 50mm) for Automobile Lifts, Jacks, Racks
Asin: B07BXK6FMC
Used To To Prevent Vehicle Rocker Panel And/Or Running Boards From Being Damaged When Lifting A Vehicle..
Rated 3000Lbs Each, High Rebound Resistance, High Tear And Abrasion Resistance.
Textured Top To Prevent Slipping And Increase Grip On Vehicle Frames Or Chassis.
Application: Used With Low Rise Lifts , Rolling Jacks And Some Inground Lifts.
Features
- Car vehicle lift ramp replacement pads, 4 solid Natural Rubber lift block pads
- Application: used with low rise lifts , rolling jacks and some inground lifts
- Used to to prevent vehicle rocker panel and/or running boards from being damaged when lifting a vehicle.
- Textured top to prevent slipping and increase grip on vehicle frames or chassis
- Rated 3000lbs each, High rebound resistance, High Tear and Abrasion Resistance
- See more on Amazon...
Brand: PMD Products | Manufacturer: PMD Products
Dimensions: 3.00 x 8.00 x 6.00 Inches | Weight: 10.91 Pounds
See On Amazon #4
PMD Products OIL Pump Primer Tool 1/4 Hex for use with Ford Engine 289 302 390 428
Asin: B00ASANC0M | Model: 20061 | PartNumber: 20061
For Use With Any Hand Drill. Black Oxide Finish.
Aluminum Bushing To Insert In Manifold For Centering Of Tool.
Triangle Shaped Drive End To Eliminate Drill Chick Slippage.
It Works By Connecting To The Oil Pump Shaft Through The Distributor Hole And Inserting In Oil Pump..
Features
- NOW RETOOLED --Prime lubricating system of rebuilt engines to prevent damage of dry start
- It works by connecting to the oil pump shaft through the distributor hole and inserting in oil pump.
- For use with any hand drill. Black Oxide finish
- Triangle Shaped Drive End to eliminate drill chick slippage
- Aluminum bushing to insert in manifold for centering of tool
- See more on Amazon...
Brand: FORGEMAX | Manufacturer: PMD Products
See On Amazon #5
PMD Products Self-Tightening 5 Ton Frame & Body Repair Small Mouth Pull Clamp (2 Way)
Asin: B00ZMQJKSA | Model: CL5T | PartNumber: CL5T
Compact And Lightweight For Pulling From Many Places.
The Overall Length Is 8" And Jaw Width Is 1.8", Weight 4.5 Lbs.
Minimum Of 1-1/2" Reach-Around For Flanges, Cowls, Pinch Welds, And Lips.
Two-Way Pull Operation. Butts Against Panels Where Only Narrow Bite Available..
Features
- Self tightening clamp, grips tighter as it is pulled.
- Two-way pull operation. Butts against panels where only narrow bite available.
- Compact and lightweight for pulling from many places
- Minimum of 1-1/2 reach-around for flanges, cowls, pinch welds, and lips
- The overall length is 8 and jaw width is 1.8, weight 4.5 lbs
- See more on Amazon...
Brand: PMD Products | Manufacturer: PMD Products
Weight: 4.50 Pounds
See On Amazon #6
PMD Products Solid Rubber Auto Lift Block Spacer Pad 6-3/8" x 4-3/4" x 3" (160mm x 120mm x 75mm) for Automobile Lifts, Jacks, Racks
Asin: B09F8R349T
Used To To Prevent Vehicle Rocker Panel And/Or Running Boards From Being Damaged When Lifting A Vehicle..
Rated 3000Lbs Each, High Rebound Resistance, High Tear And Abrasion Resistance.
Textured Top To Prevent Slipping And Increase Grip On Vehicle Frames Or Chassis.
Application: Used With Low Rise Lifts , Rolling Jacks And Some Inground Lifts.
Features
- Car vehicle lift ramp replacement pads 3" height, 4 solid Natural Rubber lift block pads
- Application: used with low rise lifts , rolling jacks and some inground lifts
- Used to to prevent vehicle rocker panel and/or running boards from being damaged when lifting a vehicle.
- Textured top to prevent slipping and increase grip on vehicle frames or chassis
- Rated 3000lbs each, High rebound resistance, High Tear and Abrasion Resistance
- See more on Amazon...
Brand: PMD Products | Manufacturer: PMD Products
Dimensions: 6.00 x 14.00 x 8.00 Inches | Weight: 14.00 Pounds
See On Amazon #7
PMD Products Magnetic Camber Caster King Pin Gauge Automobile Car Truck Wheel Alignment Tool
Asin: B00PB7V3SU
The Ÿcamber Gauge Has Fixed Graduation From +5Ø To -5Ø.
The King Pin Gauge Is Graduated From 0 To 14 Left To Right..
The Adjustable Castor Gauge Is Graduated From +11Ø To -3Ø..
On The Rear There Are Two Brass Adjuster Knobs, One To Zero The Bubble During Angle Measurement And The Other For Adjusting The King Pin Inclination..
Features
- Mounts onto a hub or brake disc for quick and accurate measurement of camber & castor angles. Also does king pin inclination
- On the rear there are two brass adjuster knobs, one to zero the bubble during angle measurement and the other for adjusting the king pin inclination.
- The Camber gauge has fixed graduation from +5 to -5
- The Adjustable castor gauge is graduated from +11 to -3 .
- The King pin gauge is graduated from 0 to 14 left to right.
- See more on Amazon...
Brand: PMD Products | Manufacturer: PMD Products
Dimensions: 5.00 x 11.00 x 9.00 Inches | Weight: 3.85 pounds
See On Amazon #8
PMD Products AC Clutch Removal Tool - 23 Piece Compressor Tool kit - Complete Set of Automotive Tools - Mechanic Tool Set for Removal and Installation of air Conditioner Clutch hub with Spanner
Asin: B06XT4M8D2 | Model: 9440 | PartNumber: 9440
He Kit Also Contains All The Necessary Tools To Reinstall A Clutch Hub Back Onto The Compressor..
Includes Adjustable Spanner, See Application In Product Description Below.
Gm Metric And Standard Thread Hub Remover/ Installer, Ford Coarse Thread Hub Remover.
The Kit Will Remove The Clutch Hub From All The Compressor Listed..
Features
- Compressor clutch removal tool for GM, Ford, Chrysler, Sanden, Nippondenso, Delphi, DKS, and Zexel compressors.
- The kit will remove the clutch hub from all the compressor listed.
- he kit also contains all the necessary tools to reinstall a clutch hub back onto the compressor.
- GM Metric and Standard thread Hub Remover/ Installer, Ford Coarse thread hub remover
- Includes Adjustable Spanner, See application in product description below
- See more on Amazon...
Brand: PMD Products | Manufacturer: PMD Products
See On Amazon #9
Abrasive Media for Pneumatic Spark Plug Cleaner Sand Blaster 1 Lb Bag Replacement
Asin: B009PVDVBK | Model: 10017 | PartNumber: 10017
Same Material As We Purchase From The Factories That Make The Blasters.
Same Material As We Purchase From The Factoirs That Make The Blasters.
Freshen Up Your Blaster Or Add More Media To Enhance The Blasters Effective Rate.
Features
- Abrasive Media for all brands of pneumatic spark plug cleaners/blasters
- Freshen up your blaster or add more media to enhance the blasters effective rate
- Same material as we purchase from the factories that make the blasters
- Same material as we purchase from the factoirs that make the blasters
- See more on Amazon...
Brand: PMD Products | Manufacturer: PMD Products
Dimensions: 2.00 x 5.00 x 4.00 inches
See On Amazon #10
PMD Products Pneumatic Spark Plug Cleaner Sand Blaster w/Abrasive
Asin: B006V7ASD0 | Model: 32860 | PartNumber: 32860
Include Abrasive Media And Manual.
Use To Remove Performance Hindering Carbon Build Up From Spark Plugs, Works With All Spark Plug Types And Sizes.
1/4" Npt Inlet, Recommended 90 Psi, Air Consumption 7.7 Cfm.
Mounting Flange To Attach To Workbench, All Metal Construction.
Features
- 2 Position cleaning, position 1 for rigorous abrasive cleaning and position 2 for air blow-off
- Mounting flange to attach to workbench, All Metal Construction
- Include Abrasive Media and Manual
- 1/4 NPT inlet, recommended 90 PSI, Air consumption 7.7 CFM
- Use to remove performance hindering carbon build up from spark plugs, Works with all spark plug types and sizes
- See more on Amazon...
Brand: PMD Products | Manufacturer: PMD Products
See On Amazon #11
Timing Light Xenon Inductive with 0 to 60 Degree Dial Advance Ignition Spark Checker
Asin: B0070NQQE4 | Model: 6083 | PartNumber: 6083
High Impact Bright Abs Housing, Bright Xenon Bulb.
Brilliant Xenon Flash Works At All Rpms, Works With All 12 -16 Volt Systems.
Set Timing Advance Without A Degree Scale On Your Engine..
Includes 2 - Trigger Activated, Clamp-On Inductive Pickup, 4 Ft. Detachable Leads.
Features
- 60 advance dial makes it easier to read and adjust timing advance
- Includes 2 - Trigger activated, Clamp-on inductive pickup, 4 ft. detachable leads
- High Impact Bright ABS housing, Bright xenon bulb
- Set timing advance without a degree scale on your engine.
- Brilliant Xenon Flash works at all RPMS, Works with all 12 -16 Volt systems
- See more on Amazon...
Brand: PMD Products | Manufacturer: PMD Products
Weight: 1.85 Pounds
See On Amazon #12
PMD Products 14-1/2" Steering Wheel Holder Stand Fix Tool for Front End Wheel Alignment
Asin: B07R7DN5NY
Plastic Rollers Hold Firm Against Steering Wheel While Making No Marks On The Steering Wheel (Safe For Glossed Wood Wheels) Tool Weighs 1.8 Lbs.
Tool Weighs 1.8 Lbs.
Steering Wheel Holder Made Of Steel And Plastic.
Spring Loaded Adjuster To Apply Required Pressure To Wheel To Keep It In Place During Front End Alignment Adjustments.
Features
- Holder is 15-5/8" (370mm) tall, 7-3/4" (195mm) wide and 8" (200mm) length (along the steering wheel direction)
- Spring loaded adjuster to apply required pressure to wheel to keep it in place during front end alignment adjustments
- Plastic rollers hold firm against steering wheel while making no marks on the steering wheel (safe for glossed wood wheels) Tool weighs 1.8 lbs
- Steering wheel holder made of steel and plastic
- Tool weighs 1.8 lbs
- See more on Amazon...
Brand: PMD Products | Manufacturer: PMD Products
Dimensions: 14.50 x 8.00 x 7.50 Inches | Weight: 1.80 Pounds
See On Amazon #13
PMD Products Crankshaft Harmonic Balancer Puller Holder is Compatible with Repair and Replace of Mercedes Benz M112 M113 M137 Engines
Asin: B0154ATGMS | Model: 1099 | PartNumber: 1099
Features
- This tool will not work with your Benz as this tool works with only with the engine models listed below
- See more on Amazon...
Brand: PMD Products | Manufacturer: PMD Products
Weight: 6.00 Pounds
Warranty: 90 days
See On Amazon #14
PMD Products 3 Oil Pump Primer Tools The 1/4", 5/16" Hex are Applicable for use with Ford Engines and Primer for GM Chevrolet Big Small Block and 4.3L Engines
Asin: B08LHKFMMK | Model: 20000 | PartNumber: 20000
One Primer Has 1/4 Inch Hex Shape Formed In Tool End, Other Primer Has 5/16 Inset, Gm Primer Has Metal Coupler To Interface To Oil Pump Drive Shaft.
All 3 Primers Have Aluminum Bushing To Insert In Manifold For Centering Of Tool.
All 3 Primers Have Triangle Shaped Drive End To Eliminate Drill Chuck Slippage. For Use With Any Hand Drill. Black Oxide Finish.
Set Of 3 Oil Primers Tools - Tool Set Is Compatible With All Popular Ford V8's And Gm Chevy V8 Engines. Also Will Fit Gm 4.3L..
Features
- Prime lubricating system of rebuilt engine prior to first start to prevent damage of dry start
- Set of 3 Oil Primers Tools - Tool Set is compatible with all popular Ford V8's and GM Chevy V8 engines. Also will fit GM 4.3L.
- One primer has 1/4 inch hex shape formed in tool end, other primer has 5/16 inset, GM Primer has metal coupler to interface to oil pump drive shaft
- All 3 Primers have Triangle Shaped Drive End to eliminate drill chuck slippage. For use with any hand drill. Black Oxide finish
- All 3 Primers have Aluminum bushing to insert in manifold for centering of tool
- See more on Amazon...
Brand: PMD Products | Manufacturer: PMD Products
Dimensions: 2.00 x 10.00 x 5.00 Inches | Weight: 1.80 Pounds
See On Amazon #15
PMD Products 3D DSP Wheel Alignment Rack Tool for Camber Caster Gauge Adapter Rim Clamp Mount Mounting
Asin: B0157QU9IO | Model: 1817 | PartNumber: 1817
Fits From 11" To 25" Rims, 2 Settings. Reversible Hunter Style Rim Locating Pins.
Universal Plate To Mount To Most Magnetic Camber Gauges.
Commercial Version Tool. Heavy Duty Sliding Rods.
Can Be Used On Aluminum And Steel Wheels, Fit Almost Any Type Of Wheel Mounts To Rim Edge.
Features
- Works great with most all magnetic camber & caster gauges - Magnetic Camber Gauge in pictures is not included in this sale
- Can be used on aluminum and steel wheels, fit almost any type of wheel Mounts to rim edge
- Fits from 11 to 25 rims, 2 settings. Reversible Hunter style rim locating pins
- Commercial Version Tool. Heavy Duty Sliding Rods
- Universal Plate to mount to most magnetic camber gauges
- See more on Amazon...
Brand: PMD Products | Manufacturer: PMD Products
Dimensions: 10.00 x 21.00 x 12.00 Inches | Weight: 6.00 Pounds
See On Amazon #16
PMD Products GM Transmission Shifter Seal Remover Installer Turbo 300 350 400 700-R4 4L60 Includes Seal
Asin: B0153WO9WO | Model: 9250 | PartNumber: 9250
This Handy Tool Will Let You Remove And Insert The Seal Without Removing The Tranny Pan Or In Most Cases Without Even Lowering The Transmission..
Steel Construction Threaded Remover And Installer Dowl Plus Includes Shifter Gear Selector Rod Seal.
Tool Has Sharp Leading Thread Edge To Engage With Leaky Seal For Efficient Removal.
Product Upgrade (Jan 2020): The Tool Is Machined A Few Thousands More Due To The Gm Shifter Shaft Has A High Spot On Shaft Near Where Gm Formed Threads.
Features
- Precision made tool is mandatory to remove the leaky seal around the shifter selector shaft mechanism through the transmission case.
- Product upgrade (Jan 2020): the tool is machined a few thousands more due to the GM shifter shaft has a high spot on shaft near where GM formed threads
- This handy tool will let you remove and insert the seal without removing the tranny pan or in most cases without even lowering the transmission.
- Tool has sharp leading thread edge to engage with leaky seal for efficient removal
- Steel construction threaded remover and installer dowl plus includes shifter gear selector rod seal
- See more on Amazon...
Brand: PMD Products | Manufacturer: PMD Products
Dimensions: 1.00 x 4.00 x 3.00 Inches | Weight: 0.31 Pounds
See On Amazon #17
PMD Products Tool is Compatible with Repair Replace of BMW Rear Ball Joint and Bushing Tool for These Models E38 E39 E52 E53 E60 E61 E63 E64 E65 E66 E67 E70
Asin: B015Z0QQFM | Model: 39450 | PartNumber: 39450
Application: E38 E39 E52 E53 E60 E61 E63 E64 E65 E66 E67 E70.
Handy Tools Eliminates The Need To Remove Drive-Line Components From Vehicle While Servicing.
This Tool Set Allows For On-Car Installation/Removal.
Allows Removal And Installation Of Rear Outer Ball Joint.
Features
- Designed to remove the press fit the solid metallic rear suspension bushings [bushes] (actually ball joints) located in the bearing carrier
- Allows removal and installation of rear outer ball joint
- Application: E38 E39 E52 E53 E60 E61 E63 E64 E65 E66 E67 E70
- This tool set allows for on-car installation/removal
- Handy tools eliminates the need to remove drive-line components from vehicle while servicing
- See more on Amazon...
Brand: PMD Products | Manufacturer: PMD Products
Dimensions: 2.00 x 3.00 x 3.00 Inches | Weight: 1.00 Pounds
See On Amazon #18
PMD Products 5/16-Inch Hex Engine Oil Pump Primer for use with Ford 351, 400, 429, 460 engines
Asin: B00ANFNM2U | Model: 20062 | PartNumber: 20062
Precision Cut Aluminum Bushing To Insert In Manifold For Centering Of Tool.
Has Centered 5/16" Hex Cut Out In Shaft To Fit Oil Pump Perfectly.
Black Oxide Finish Shaft With Triangle Head To Eliminate Drill Chuck Slipage.
Fits Popular Engine Of 351, 400, 429, 460 Cubic Inches.
Features
- OIL PUMP PRIMER TOOL 5/16" Hex drive end for FORD 351 Cleveland, Windsor
- Fits popular engine of 351, 400, 429, 460 cubic inches
- Precision Cut aluminum bushing to insert in manifold for centering of tool
- Black Oxide finish shaft with Triangle head to eliminate drill chuck slipage
- Has centered 5/16 Hex cut out in shaft to fit oil pump perfectly
- See more on Amazon...
Brand: FORGEMAX | Manufacturer: PMD Products
See On Amazon #19
PMD Products Two Way Dual Self-Tightening 5 Ton Frame & Body Repair Small Mouth Pull Clamp (2 Way)
Asin: B07XLPZ6MS | Model: TWBC5T | PartNumber: TWBC5T
Compact And Lightweight For Pulling From Many Places.
The Overall Length Is 8" And Jaw Width Is 1.8", Weight 4.5 Lbs.
Minimum Of 1-1/2" Reach-Around For Flanges, Cowls, Pinch Welds, And Lips.
Two-Way Pull Operation. Butts Against Panels Where Only Narrow Bite Available..
Features
- Self tightening clamp, grips tighter as it is pulled.
- Two-way pull operation. Butts against panels where only narrow bite available.
- Compact and lightweight for pulling from many places
- Minimum of 1-1/2 reach-around for flanges, cowls, pinch welds, and lips
- The overall length is 8 and jaw width is 1.8, weight 4.5 lbs
- See more on Amazon...
Brand: PMD Products | Manufacturer: PMD Products
See On Amazon #20
PMD Products Engine Cylinder Dial Bore Indicator Gauge Kit 1.4" - 6" .0001"
Asin: B01M34MT0W | Model: 300 | PartNumber: 300
Insulated Grip - Carbide Anvils - Tool Weight 6.1 Lbs.
Radius-Ed Hardened Tips Improved Accuracy. Comes In Form Fitted Case.
Includes All The Necessary Spacers, Interchangeable Extensions. Note That 2 Of The Extensions Are Already Mounted In The Tool Heads.
For Quick Transferable Accurate Inside Measurements.
Features
- Range 1.400"-6.000" diameter, .0001" graduations, 6" depth
- For quick transferable accurate inside measurements
- Insulated Grip - Carbide Anvils - Tool weight 6.1 lbs
- Includes all the necessary spacers, interchangeable extensions. Note that 2 of the extensions are already mounted in the tool heads
- Radius-ed hardened tips improved accuracy. Comes in form fitted case
- See more on Amazon...
Brand: PMD Products | Manufacturer: PMD Products
See On Amazon #21
PMD Products Propane LP Gas Torch 3 Nozzle Tips Heater Ice Snow Melt Pipe Thaw Weed Burner Tool
Asin: B016S560BI | Model: T90 | PartNumber: T90
Turbo Blast Trigger.
Perfect For Melting Snow, Thawing Pipe, Burning Weeds,.
Adjustable Gas Flow Control.
24 Inch Overall Length, 60 Inch Hose With 8 Inch Rubber Hand Grip Area.
Features
- Kit includes 3 nozzles: 2 inch, 1-3/8 inch, and 1-1/8 inch for different flame patterns
- 24 inch overall length, 60 inch hose with 8 inch rubber hand grip area
- Turbo Blast Trigger
- Adjustable gas flow control
- Perfect for Melting snow, thawing pipe, burning weeds,
- See more on Amazon...
Brand: PMD Products | Manufacturer: PMD Products
Dimensions: 5.00 x 24.00 x 5.00 Inches | Weight: 2.50 Pounds
See On Amazon #22
PMD Products 2 Oil Pump Primer Tools 1/4", 5/16" Hex for use with Ford Engine 289 302 390 428 351 429 460
Asin: B00ASAQAH4 | Model: 20061-20062 | PartNumber: 20061-20062
One Primer Has 1/4 Inch Hex Shape Formed Into The End Of Tool, Other Primer Has 5/16 Inch.
Aluminum Bushing To Insert In Manifold For Centering Of Tool.
Both Have A Triangle Shaped Drive End To Eliminate Drill Chuck Slippage. For Use With Any Hand Drill. Black Oxide Finish.
It Works By Connecting To The Oil Pump Shaft Through The Distributor Hole And Inserting In Oil Pump..
Features
- Prime lubricating system of rebuilt engine prior to first start to prevent damage of dry start
- It works by connecting to the oil pump shaft through the distributor hole and inserting in oil pump.
- One primer has 1/4 inch hex shape formed into the end of tool, other primer has 5/16 inch
- Both have a Triangle Shaped Drive End to eliminate drill chuck slippage. For use with any hand drill. Black Oxide finish
- Aluminum bushing to insert in manifold for centering of tool
- See more on Amazon...
Brand: FORGEMAX | Manufacturer: PMD Products
Dimensions: 2.00 x 8.00 x 4.00 inches
See On Amazon #23
PMD Products 14pc Master Ball Joint Service Adapter Set for 2WD 4WD vehicles in Case
Asin: B008DGNLFY
Will Work With Most Passenger Vehicles.
Finish Is Matte Black Not Semi-Glossy Like In Image.
Fits Most Dodge Light Trucks, Dodge Vans, Durango And Dakota.
Features
- This set allows for the removal and installation of press-fit ball joints on many GM, Ford, and Dodge 2 & 4 WD Pickups, Vans, and SUV s
- Fits most Dodge light trucks, Dodge vans, Durango and Dakota
- Will work with most passenger vehicles
- Finish is matte black not semi-glossy like in image
- See more on Amazon...
Brand: PMD Products | Manufacturer: PMD Products
Dimensions: 4.00 x 17.00 x 12.00 Inches | Weight: 12.55 Pounds
See On Amazon #24
PMD Products Brake Wheel Master Cylinder Small Hone Replacement Stones 1-1/8" 80 Grit
Asin: B014JQQE4Q | Model: 96080 | PartNumber: 96080
Attaches To 3 Arm Hone Via Cotter Pin Clips.
Includes 3 Stones.
Will Work With Most All 3 Arm Brake Hones.
Glue Bonded To Aluminum Backer.
Features
- Grinding stone dimensions: 1-1/8" L x 3/16" W x 1/8" diameter;
- Glue Bonded to aluminum backer
- Attaches to 3 arm hone via cotter pin clips
- Will work with most all 3 arm brake hones
- Includes 3 stones
- See more on Amazon...
Brand: PMD Products | Manufacturer: PMD Products
Dimensions: 1.00 x 3.00 x 3.00 Inches
See On Amazon #25
PMD Products GM 4L60E 4L80E Transmission Shifter Seal Remover Installer Tool with Seal
Asin: B07GJV1PCC | Model: 96480 | PartNumber: 96480
Handy Tool Will Let You Remove And Insert The Seal Without Removing The Tranny Pan Or In Most Cases Without Even Lowering The Transmission..
Works With Transmissions That Have The Electrical Shift Position Switch Around The Transmission Shift Selector Which Requires A Longer Tool To Remove And Replace The Seal.
Install/Remove Tool Includes Shifter Gear Selector Rod Seal. Steel Construction Threaded Remover And Steel Installer Dowl.
Tool Is Mandatory To Remove The Leaky Seal Around The Shifter Selector Shaft Mechanism Through The Transmission Case..
Features
- Long version tool for seal Remove/Install for transmissions with electrical shift position switches on end of shifter shaft for use with 4L60E, 4LC65E, 4L70E, 4L80E for 1996 and newer GM Chevy Cars and Trucks with V6 and V8 transmissions, for example Impala, C1500, C2500, C3500, K1500, CT4/5/6, Camaro etc
- Tool is mandatory to remove the leaky seal around the shifter selector shaft mechanism through the transmission case.
- Handy tool will let you remove and insert the seal without removing the tranny pan or in most cases without even lowering the transmission.
- Install/Remove Tool includes shifter gear selector rod seal. Steel construction threaded remover and steel installer dowl
- Works with transmissions that have the electrical shift position switch around the transmission shift selector which requires a longer tool to remove and replace the seal
- See more on Amazon...
Brand: PMD Products | Manufacturer: PMD Products
Dimensions: 1.00 x 4.00 x 4.00 inches
See On Amazon #26
PMD Products Pair Wheel Alignment Turntable Turn Plates 10,000 Pounds Capacity w/Transition Bridge and Thrust Block
Asin: B078H2JM9V
Plates Adjust 0-50 Degrees Left And Right, Indicator Pin With Scale To 60 Degrees.
Heavy Duty Commercial Version Tool. Locking Pins Hold The Turntable Securely In Place While You Position The Car On The Turntables..
2.55" (65Mm) Slide Movement, Full-Floating Ball Bearing Design For Full 360 Degree Wheel Movement.
Turntables Have Gold Pointer With Scale. Plates Are 13-3/4" Diameter X 2" Tall, Platform Is 15-3/5", Weight Is 34Lbs.
Features
- Kit includes: 2 Steel 5 Ton (each) Wheel Alignment Turntable Plates w/ 2 drive on passing transition rubber bridges and rubber thrust blocks
- Turntables have Gold pointer with scale. Plates are 13-3/4 diameter x 2 Tall, Platform is 15-3/5, weight is 34lbs
- Plates adjust 0-50 degrees left and right, Indicator Pin with scale to 60 degrees
- 2.55 (65mm) Slide movement, Full-floating ball bearing design for full 360 degree wheel movement
- Heavy Duty Commercial Version Tool. Locking pins hold the turntable securely in place while you position the car on the turntables.
- See more on Amazon...
Brand: PMD Products | Manufacturer: PMD Products
Weight: 6.00 Pounds
See On Amazon #27
PMD Products Angled Glow-Plug Connector Pliers Tool is Compatible with Repair and Replace of Mercedes Benz BMW VW Audi Diesel Engines
Asin: B0145S7BRC | Model: 188 | PartNumber: 188
Molded Composite Handle For Increased Comfort, Grip And Control.
Narrow Access Design For Tight Work, Durable Commercial Use Tool.
Heat Treated High-Carbon Steel Construction, Padded Handles For Additional Comfort.
Designed To Remove Glow Plug Connectors In Hard To Reach Areas.
Features
- Glow-Plug Connector Pliers Mercedes Benz BMW VW Audi Diesel - angled design
- Designed to remove glow plug connectors in hard to reach areas
- Molded Composite Handle for increased comfort, grip and control
- Heat Treated High-Carbon Steel Construction, Padded handles for additional comfort
- Narrow Access Design for tight work, Durable commercial use tool
- See more on Amazon...
Brand: PMD Products | Manufacturer: PMD Products
Dimensions: 2.00 x 11.00 x 5.00 Inches
See On Amazon #28
Digital Ignition Timing Light Xenon Inductive 0 to 92 Degree Tach Advance w/RPM Readout
Asin: B074XKMHF3 | Model: 8700 | PartNumber: 8700
Tool Is Trigger Activated, Clamp-On Metal Inductive Pickup, 4 Ft. Detachable Leads.
Works To 9990 Rpm, Works With All 12 -16 Volt Systems, Consumes 3.6W. Detailed Instruction Manual Included..
High Impact Bright Abs Housing, Bright Xenon Bulb. Ios 9001 Ce Rosh Certified.
Includes Extra Inductive Pickup Cable Incase You Burn On Exhaust. Lcd Display Shows Rpm And Degrees. 2 Stroke Or 4 Stroke Selectable Switch.
Features
- Digital Timing Light with up to 92 advance. Set timing advance while monitoring RPM readout on your 2 or 4 stroke engine.
- INCLUDES Extra Inductive pickup cable incase you burn on exhaust. LCD Display shows RPM and DEGREES. 2 Stroke or 4 Stroke selectable switch
- Tool is Trigger activated, Clamp-on metal inductive pickup, 4 ft. detachable leads
- High Impact Bright ABS housing, Bright xenon bulb. IOS 9001 CE ROSH Certified
- Works to 9990 RPM, Works with all 12 -16 Volt systems, Consumes 3.6W. Detailed instruction manual included.
- See more on Amazon...
Brand: PMD Products | Manufacturer: PMD Products
See On Amazon #29
PMD Products Tool is Compatible with Repair and Replace of BMW E36 E46 Rear Axle Bushings
Asin: B018VAWETU | Model: E3646 | PartNumber: E3646
Allows Removal And Installation Of Rear Outer Ball Joint.
Andy Tools Eliminates The Need To Remove Drive-Line Components From Vehicle While Servicing.
This Tool Set Allows For On-Car Installation/Removal.
Designed To Remove The Press Fit The Solid Metallic Rear Suspension Bushings (Bushes/Joints) Located In The Bearing Carrier.
Features
- For use on BMW E36 E46 Chassis
- Designed to remove the press fit the solid metallic rear suspension bushings (bushes/joints) located in the bearing carrier
- Allows removal and installation of rear outer ball joint
- This tool set allows for on-car installation/removal
- andy tools eliminates the need to remove drive-line components from vehicle while servicing
- See more on Amazon...
Brand: PMD Products | Manufacturer: PMD Products
Dimensions: 4.00 x 16.00 x 11.00 Inches | Weight: 9.00 Pounds
See On Amazon #30
PMD Products Diesel Engine Compression Pressure Tester is Compatible with Repair and Replace on GM Duramax Ford Powerstroke Cummins International NAVISTAR Detroit CAT Perkins Engines 1000PSI
Asin: B0883FJFV7
Compatible With Repair And Replace On Gm Duramax 4.3/5.7/6.2/6.5L/6.6L , Cat D-336, 1674, 1676, 3406, 3408, 3412; Perkins 4.203, 4.236, 4.248, 6.354, 8.540.
Dual Scale 80 Mm Diameter Liquid Filled Gauge 0 - 1000 Lb/In And 0 - 70 Bar, 14.5" Long Hose. Built In Check Valve.
Compatible With Repair And Replace For Mercedes 12Mm, 18Mm, Case, Deer, Mack, Perkins, Onan, Allis-Chalmers, + More, See List Product Details.
Compatible With Repair And Replace On Cummins V6, V8, V12, 855, 5.9L, Detroit Diesel 53, 71, 92, 110, 149, V53, V71 With Low Or High Clamp Inj. Hold Down.
Features
- Best kit for the most popular truck/tractor engines for use on Cummins 5.9, Ford Powerstroke 6.0L, 6.4L, 6.7L, 7.3L (both styles), International Navistar 6.9/7.3L, International Navistar 4.5L VT275, 6.0L VT365E, 6.4L MaxxForce 7
- Compatible with Repair and Replace on Cummins V6, V8, V12, 855, 5.9L, Detroit Diesel 53, 71, 92, 110, 149, V53, V71 with low or high clamp inj. hold down
- Compatible with Repair and Replace on GM Duramax 4.3/5.7/6.2/6.5L/6.6L , CAT D-336, 1674, 1676, 3406, 3408, 3412; PERKINS 4.203, 4.236, 4.248, 6.354, 8.540
- Compatible with Repair and Replace for Mercedes 12MM, 18MM, CASE, DEER, MACK, PERKINS, ONAN, Allis-Chalmers, + more, see list product details
- Dual scale 80 mm diameter Liquid Filled Gauge 0 - 1000 Lb/In and 0 - 70 bar, 14.5 long hose. Built in Check valve
- See more on Amazon...
Brand: PMD Products | Manufacturer: PMD Products
Dimensions: 4.00 x 12.00 x 10.00 Inches | Weight: 16.00 pounds
See On Amazon