Red Line - Buying Guide
Last Updated: 05/11/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
Red Line Professional 11-Foot Drywall Lift Panel Hoist Jack
Asin: B001NMTH0S | Model: RLP 9000 | PartNumber: RLP 9000 | Ean: 0811640010379 | UPC: 811640010379
Tilts 65° Laterally For Easy Loading And For Installation On Sloped Ceilings.
Tool Free Assembly And Teardown.
Get Sheets In Place And Mounted In A Fraction Of The Time.
All Welded Steel Construction.
Features
- One Person Operation
- All welded steel construction
- Tilts 65 laterally for easy loading and for installation on sloped ceilings
- Get sheets in place and mounted in a fraction of the time
- Tool free assembly and teardown
- See more on Amazon...
Brand: Red Line | Manufacturer: Red Line
Weight: 105.00 pounds
See On Amazon #2
Red Line Manufacturing 25 Pcs Metal Screed Chairs
Asin: B0BY7GN8K9 | Model: sc100 | PartNumber: sc100 | Ean: 0657479172051 | UPC: 657479172051
Metal Screed Chairs Can Also Be Used To Help Get Your Subgrade To Perfect Levels. Used For Gravel Leveling For Concrete Pads, Or Sand Base Leveling For Patio Or Brick Pavers, Or Even Used For Leveling Dirt For Landscaped Areas (See Instructional Videos)..
Please Watch Our Instructional Videos To Learn How To Use Metal Screed Chairs Along With All The Accessories..
. If You Are Not Using The Grade Tool You Can Use A Tape Measurer To Set The Top Of The Rebar To 2-1/4” Below The Stringline If Using A 2” Od Metal Pipe. Next Place The Metal Screed Chair On Top Of These Rebars To Provide A Saddle For The Temporary Screed Pipe. A 2" Od Pipe 10’-20’ Long Is Used And Is Slid Forward To The Next Set Of Metal Screed Chairs After You Have Screed Through That Section Of The Concrete, Leaving The Screed Chairs Free To Remove, Wash Off And Reuse. Use These Against A Building Or In The Center Of A Larger Pour To Provide An Accurate And Moveable Screed System..
We Have Grade Plates You Can Install If You’Re Driving The Rebars In Softer Ground To Help Keep The Rebars From Sinking While Screeding (Recommended When Using Heavy Screed Pipes Or Larger Screeding Equipment). The Grade Tool, Grade Plates And Other Accessories Are Available To Purchase Separately. The Grade Tool Makes Setting The Chairs To Grade Very Easy And Quick..
To Use Metal Screed Chairs You Must First Set A Stringline To Finished Grade. If Your Pouring Next To A Wall You Need To Keep The Stringline About 12" To 16" Away From The Wall To Leave Room For Your Screed To Move. Next You Need To Cut 1/2" Rebar To 18" - 24" In Length. Drive Those Rebars About A Half Inch To One Inch Away From The Stringline Every 3'-4' Apart. Using A Hammer, Drive The Rebar Into The Ground Until The Top Of The Rebar Is About The Same Level As The String Line, Then Using The Grade Tool, Finish Driving Them With A Hammer Till The Pointer On The Tool Lines Up With The String Line (The Grade Tool Is Designed For A 2” Od Metal Pipe)..
Metal Screed Chairs Are Used When Pouring Up Against A Building Or A Wall Or When The Pad You Are Pouring Is Wider Than Your Screed, You Can Set Them In The Center To Hold A Metal Pipe At Grade To Screed Off Of. A Must For Garage Floors, Basement Floors, Shop Floors, And All Concrete Pad Sizes. They Can Be Used When Pouring Footings To Give You A Perfectly Flat Footing Surface Without Having To Use Forms (See Instructional Videos)..
Features
- Metal Screed Chairs are used to hold a 2 OD or smaller metal pipe to create a temporary rail at concrete grade for your screed to ride on. This will help to give you a flatter more accurate finished product. Our Screed Chairs are manufactured in the USA from metal that is manufactured in the USA. Metal Screed Chairs are virtually indestructible and can be used over and over again.
- Metal Screed Chairs are used when pouring up against a building or a wall or when the pad you are pouring is wider than your screed, you can set them in the center to hold a metal pipe at grade to screed off of. A Must for garage floors, basement floors, shop floors, and all concrete pad sizes. They can be used when pouring footings to give you a perfectly flat footing surface without having to use forms (see instructional videos).
- Metal Screed Chairs can also be used to help get your subgrade to perfect levels. Used for gravel leveling for concrete pads, or sand base leveling for patio or brick pavers, or even used for leveling dirt for landscaped areas (see instructional videos).
- To use Metal Screed Chairs you must first set a stringline to finished grade. If your pouring next to a wall you need to keep the stringline about 12 to 16 away from the wall to leave room for your screed to move. Next you need to cut 1/2 rebar to 18 - 24 in length. Drive those rebars about a half inch to one inch away from the stringline every 3'-4' apart. Using a hammer, drive the rebar into the ground until the top of the rebar is about the same level as the string line, then using the grade tool, finish driving them with a hammer till the pointer on the tool lines up with the string line (the grade tool is designed for a 2 OD metal pipe).
- . If you are not using the grade tool you can use a tape measurer to set the top of the rebar to 2-1/4 below the stringline if using a 2 OD metal pipe. Next place the Metal Screed Chair on top of these rebars to provide a saddle for the temporary screed pipe. A 2 OD pipe 10 -20 long is used and is slid forward to the next set of Metal Screed Chairs after you have screed through that section of the concrete, leaving the Screed Chairs free to remove, wash off and reuse. Use these against a building or in the center of a larger pour to provide an accurate and moveable screed system.
- We have grade plates you can install if you re driving the rebars in softer ground to help keep the rebars from sinking while screeding (recommended when using heavy screed pipes or larger screeding equipment). The grade tool, grade plates and other accessories are available to purchase separately. The grade tool makes setting the chairs to grade very easy and quick.
- Please watch our instructional videos to learn how to use Metal Screed Chairs along with all the accessories.
- See more on Amazon...
Brand: Red Line Manufacturing | Manufacturer: Red Line Manufacturing
Dimensions: 5.00 x 10.00 x 6.00 inches
See On Amazon #3
25 Pack 2x2 Square washers 1/2" Bolts, 10 Gauge 1/8 in. Metal by Red Line Manufacturing
Asin: B0CB78285W | Ean: 0727785412360 | UPC: 727785412360
1/2" Diameter Hole.
Brand: Red Line Manufacturing | Manufacturer: Red Line Manufacturing
See On Amazon #4
Redline Shackle Straps 2.25" Hole Center 1.25" Wide 9/16" Diameter
Asin: B00CASC34Q | Model: SP03-020 | PartNumber: SP03-020 | Ean: 0640603190007 | UPC: 640603190007
1.25" Wide.
9/16" Diameter.
2.25" Hole Center.
Brand: Red Line | Manufacturer: Redline
Weight: 1.00 Pounds
See On Amazon #5
Redline Sand Media Abrasive Blast Cabinet Replacement Vacuum Motor
Asin: B01G9CEVHK
Factory Replacement Fits Re40 And Larger Cabinets.
Brand: Red Line | Manufacturer: Redline
Weight: 5.00 Pounds
See On Amazon #6
Redline RE-TDT Transmission Tear Down Metal Work Table
Asin: B014V6G6LU
Built-In Drain System.
Overall 47" W X 32" D X 41" H.
4 X 4" Casters, Two With Wheel Locks.
Powder Coated Frame.
Features
- 1,000 lb capacity
- Powder coated frame
- Built-in drain system
- 4 x 4 casters, two with wheel locks
- Overall 47 W x 32 D x 41 H
- See more on Amazon...
Brand: Red Line | Manufacturer: Redline
Weight: 200.00 Pounds
See On Amazon #7
Redline RE48 and RE70 Sand Blast Cabinet Replacement Nozzle Pack
Asin: B01ENPVHHC
Four Total Nozzles 2 X 6Mm & 2 X 7Mm.
Brand: Red Line | Manufacturer: Redline
Weight: 1.00 Pounds
See On Amazon #8
Redline RE-SBH Sand Blast Hood
Asin: B01ENPVJT8
Interior Helmet Adjustable For Comfort.
Screened View Window 4.5" W X 2-1/4" H.
Made Of Quality Cloth & Leather.
Features
- Overall specs 10" W x 20" H
- Made of quality cloth & leather
- Interior helmet adjustable for comfort
- Screened view window 4.5 W x 2-1/4 H
- See more on Amazon...
Brand: Red Line | Manufacturer: Redline
Weight: 10.00 Pounds
See On Amazon #9
Redline Drive-in Stud
Asin: B00CA3323W | Model: RG03-080 | PartNumber: RG03-080 | Ean: 0640603143485 | UPC: 640603143485
2-1/2" Long.
Qty 4.
1/2" Dia.
Brand: Red Line | Manufacturer: Redline
Weight: 0.69 Pounds
See On Amazon #10
Redline RE48/70 Sand Blast Cabinet Foot Pedal
Asin: B01ENPVGSW
Outer Diameter Of Barb: 5/8".
Recommended Inner Diameter Of Hose: 1/2".
Comes With Air Fittings For Re48.
Features
- Designed to flow air, not air and sand
- Comes with air fittings for RE48
- Outer diameter of barb: 5/8
- Recommended inner diameter of hose: 1/2
- See more on Amazon...
Brand: Red Line | Manufacturer: Redline
Weight: 1.00 Pounds
See On Amazon #11
Redline Shackle Bolt 9/16" Dia x 3" Long for 1 3/4 Wide Spring
Asin: B00CASIUHU | Model: SP04-020 | PartNumber: SP04-020 | Ean: 0640603187007 | UPC: 640603187007
1.75"Spg.
Qty4.
Shackle Boltsw/ Nuts.
Brand: Red Line | Manufacturer: Redline
Weight: 1.40 Pounds
See On Amazon #12
Redline HH-SB Handheld Soda Blaster Gun
Asin: B071NRYKW3
Small Hand Held Unit Means Easy Mobility And Blasting.
Overall Dims: 10" L X 3-1/4" W X 8" H.
Metal Nozzle Included.
Features
- Fully portable
- Metal nozzle included
- Small hand held unit means easy mobility and blasting
- Overall dims: 10 L x 3-1/4 W x 8 H
- See more on Amazon...
Brand: Red Line | Manufacturer: Redline
Weight: 10.00 Pounds
See On Amazon #13
Red Line Manufacturing Metal Rebar Chairs 2", 2.5" or 3" can fit 3/8" or 1/2" rebar (100, Silver, 3")
Asin: B0CB7BPH73 | Model: rc1003 | PartNumber: rc1003 | Ean: 0731851912487 | UPC: 731851912487
Rebar Chair.
Brand: Red Line Manufacturing | Manufacturer: Red Line Manufacturing
Dimensions: 1.00 x 1.00 x 1.00 inches | Weight: 1.00 pounds
See On Amazon #14
25 Pack 2x2 Square washers 5/8" Bolts, 10 Gauge 1/8 in. Metal by Red Line Manufacturing
Asin: B0CB78LMB3 | Ean: 0731851912494 | UPC: 731851912494
5/8" Diameter Hole.
Brand: Red Line Manufacturing | Manufacturer: Red Line Manufacturing
See On Amazon #15
Redline Sand Blast Cabinet Dust Collector Vacuum Filter Side Attachment
Asin: B00WFJ0US6
Paper Cartridge Filter.
May Require Separate Electrical Plug For Wall Outlets.
2 Latch Locks For Filter.
Filter Cleaning Rod.
Features
- 110 volt
- Filter cleaning rod
- Paper cartridge filter
- 2 latch locks for filter
- May require separate electrical plug for wall outlets
- See more on Amazon...
Brand: Red Line | Manufacturer: Redline
See On Amazon #16
Redline SDBO7G 7 Gallon Rolling Pressurized Canister Soda Blaster
Asin: B072LDBR1Y
Uses The Same Nozzle As The Re22 Cabinet.
Overall Dims: 17-1/2" L X 13" W X 32-1/2" H.
Includes An Extra Nozzle, Teflon Tape, And Allen Wrench.
Removable Handle And Support Leg.
Features
- Ceramic nozzle included
- Removable handle and support leg
- Uses the same nozzle as the RE22 cabinet
- Includes an extra nozzle, teflon tape, and allen wrench
- Overall dims: 17-1/2 L x 13 W x 32-1/2 H
- See more on Amazon...
Brand: Red Line | Manufacturer: Redline
See On Amazon #17
Red Line EZ100 Powder Coating Cup Gun - 100kv
Asin: B00F1RTMU6 | Model: EZ100 | PartNumber: EZ100 | Ean: 0720825419985 | UPC: 720825419985
Ideal For Shops That Change Colors Often.
Excellent For Small Shops And Diy Users That Want Results Comparable To Large Coating Systems.
Can Be Used As A Backup To A Shops Main Coating System In The Event Of A Failure.
Great For Touch Up Work.
Features
- Powder flow & voltage infinitely adjustable
- Great for touch up work
- Ideal for shops that change colors often
- Can be used as a backup to a shops main coating system in the event of a failure
- Excellent for small shops and DIY users that want results comparable to large coating systems
- See more on Amazon...
Brand: Red Line Industries | Manufacturer: Red Line Industries
Dimensions: 9.00 x 16.00 x 4.00 Inches | Weight: 24.00 pounds
See On Amazon