Skf - Buying Guide
Last Updated: 04/25/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
SKF Scotseal Plusxl Seal - 47691
Asin: B00460INJ0 | Model: 47691 | PartNumber: 47691 | Ean: 0085311314190 | UPC: 085311314190
Plus Xl Design.
Machine Parts.
Fit Type: Vehicle Specific.
Brand: SKF | Manufacturer: SKF
Dimensions: 1.50 x 7.15 x 7.13 Inches | Weight: 0.75 Pounds
See On Amazon #2
SKF 47697 Rear Wheel Seal
Asin: B005XV398Q | Model: 47697 | PartNumber: 47697 | Ean: 0085311036832 | UPC: 085311036832
Scotseal.
Seal.
Wheel Seal For Drive Axle.
Od: 6-1/4 In Approx.
Brand: SKF | Manufacturer: SKF
Dimensions: 1.00 x 11.00 x 9.00 Inches
See On Amazon #3
SKF Seal Kit Fox 34mm Fits 2016-Current Forks
Asin: B00UP101OY | Ean: 8050040146307
Compound Is Compatible With A Wide Range Of Fork Oils And Is Engineered To Withstand Cracking From Uv Light.
Compared To Oem Seals, Skf Seals Provide Reduced Friction, Longer Life And Reduced Air Suction Into The Forks Lower Leg Assembly.
The Same Self-Lubricating Compound As On Skfs Motorcycle Fork Seals.
Features
- The seal kits consist of two oil seal-dirt scrapers, crush washers and pre-impregnated foam rings
- The same self-lubricating compound as on SKFs motorcycle fork seals
- Compound is compatible with a wide range of fork oils and is engineered to withstand cracking from UV light
- Compared to OEM seals, SKF seals provide reduced friction, longer life and reduced air suction into the forks lower leg assembly
- See more on Amazon...
Brand: RockShox | Manufacturer: SKF
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 0.10 Pounds
See On Amazon #4
SKF 99187 Speedi Sleeve and Tool Kit, Inch, 1.872in Shaft Diameter, 0.563in Width
Asin: B000EPOHW8 | Model: 99187 | PartNumber: 99187 | Ean: 0085311041645 | UPC: 085311041645
"Skf Speedi-Sleeve. These Thin-Walled Stainless Steel Shaft Repair Sleeves Can Come To Immediate Rescue When A Crankshaft Needs A New Sealing Surface. ".
While Installation Is Simple, It Must Be Done With Care In Order To Assure Proper Results. An Installation Tool Is Packaged With Every Sleeve.
"Low In Cost, A Speedi-Sleeve Is Slipped Over The Worn Area Quickly And Easily, And Provides A Surface That Is Actually Harder Than That Of A New Shaft. The Same Size Seal (As The One Being Replaced) Fits Snugly Onto The New Surface. And Each Speedi-Sleeve Comes As A Kit With A Disposable Installation Tool. ".
The Standard Range Of Skf Speedisleeve Sizes Covers Shaft Diameters From .472” To 8” (12 Mm To 200 Mm). The Skf Speedi-Sleeve Is Thinwalled, 0.011” (0,28 Mm), And Made Of High Quality Stainless Steel. The Contact Surface Is Wearresistant With A Finish Of Ra 10 To 20 Μin (0,25 To 0,5 Μm). No Expensive Machining Or Preparation Is Required Before Mounting. Downtime Is Reduced Since Installation Only Takes A Few Minutes.
Features
- The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shaft. It s quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface. Many popular regrinding and refinishing techniques produce a surface that cannot be properly sealed
- The standard range of SKF SPEEDISLEEVE sizes covers shaft diameters from .472 to 8 (12 mm to 200 mm). The SKF SPEEDI-SLEEVE is thinwalled, 0.011 (0,28 mm), and made of high quality stainless steel. The contact surface is wearresistant with a finish of Ra 10 to 20 in (0,25 to 0,5 m). No expensive machining or preparation is required before mounting. Downtime is reduced since installation only takes a few minutes
- SKF SPEEDI-SLEEVE. These thin-walled stainless steel shaft repair sleeves can come to immediate rescue when a crankshaft needs a new sealing surface.
- Low in cost, a SPEEDI-SLEEVE is slipped over the worn area quickly and easily, and provides a surface that is actually harder than that of a new shaft. The same size seal (as the one being replaced) fits snugly onto the new surface. And each SPEEDI-SLEEVE comes as a kit with a disposable installation tool.
- While installation is simple, it must be done with care in order to assure proper results. An installation tool is packaged with every sleeve
- See more on Amazon...
Brand: SKF | Manufacturer: SKF USA
Dimensions: 1.75 x 4.25 x 4.25 inches
See On Amazon #5
SKF 18687 Transfer Case Rear Output Shaft Seal Spring Loaded Auxiliary Dirt Lip with Excluder Dirt Boot Compatible with Chevrolet Astro Safari Blazer Jimmy Colorado Canyon Luv S10 Blazer S15 Jimmy
Asin: B000C09NOM | Model: 18687 | PartNumber: 18687 | Ean: 0085311278003 | UPC: 085311278003
Seal Lip Profile All Skf Seals Incorporate A Seal Lip Design That Meets Or Exceeds The Oe Specifications. This Provides The Toughest Exclusion Of Dirt And Contaminants, Reliable Dynamic Sealing And A Long Service Life..
The Case Components Are Made From The Highest Grade Of Carbon Steel, And Are Coated With Phosphate To Ensure Protection Against Rust. Most Metal-Cased Seals Are Coated With Bore-Tite, A Flexible Coating On The Outside Diameter Of The Seal That Fills In Small Housing Bore Imperfections, And Provides A Tight And Leak Proof Seal..
Sealing Element Skf’S Synthetic Rubber Blends Are Formulated From Families Of Complex Polymers To Provide Protection To Operate In Temperatures As Low As Minus 40 Degrees To As High As 400 Degrees Fahrenheit. Today’S Lubricants With Their Aggressive Additive Packages Can Attack The Rubber Compound Of The Seal. Skf Seals Are Engineered To Be Compatible With These Lubricants.
Skf Has A Long History In Sealing Knowledge. From Our Patent On The First Automotive Wheel Seal In 1928, We Have Evolved To A Leading Supplier Of Automotive And Truck Sealing Technology. The Demand For Increased Speeds, Higher Operating Temperatures And Synthetic Lubricants With Aggressive Additives Increase The Stress On Oil And Grease Seals. Skf Seals Deliver Unparalleled Performance Over A Wide Range Of Operating Conditions For Most Automotive And Truck Applications..
Features
- Specifications: Shaft Dia in/mm: 1.875/47.625 | Bore Dia in/mm: 2.750/69.850 | Outer Dia in/mm: 2.754/69.952 | Width in/mm:1.370/34.798 | Seal Construction Type: CRSA3 | Seal Lip Material: Polyacrylate | Boretite: No
- SKF has a long history in sealing knowledge. From our patent on the first automotive wheel seal in 1928, we have evolved to a leading supplier of automotive and truck sealing technology. The demand for increased speeds, higher operating temperatures and synthetic lubricants with aggressive additives increase the stress on oil and grease seals. SKF seals deliver unparalleled performance over a wide range of operating conditions for most automotive and truck applications.
- Seal lip profile All SKF seals incorporate a seal lip design that meets or exceeds the OE specifications. This provides the toughest exclusion of dirt and contaminants, reliable dynamic sealing and a long service life.
- Sealing element SKF s synthetic rubber blends are formulated from families of complex polymers to provide protection to operate in temperatures as low as minus 40 degrees to as high as 400 degrees Fahrenheit. Today s lubricants with their aggressive additive packages can attack the rubber compound of the seal. SKF seals are engineered to be compatible with these lubricants
- The case components are made from the highest grade of carbon steel, and are coated with phosphate to ensure protection against rust. Most metal-cased seals are coated with Bore-Tite, a flexible coating on the outside diameter of the seal that fills in small housing bore imperfections, and provides a tight and leak proof seal.
- See more on Amazon...
Brand: SKF | Manufacturer: SKF USA, Inc.
Dimensions: 1.50 x 3.63 x 3.63 inches | Weight: 0.20 pounds
Warranty: 12 Month 12,000 Miles
See On Amazon #6
SKF Seal 14006 Left For Honda Mazda Mitsubishi Hyundai
Asin: B000C05LVQ | Model: 14006 | PartNumber: 14006 | Ean: 0085311173506 | UPC: 085311173506
Superior Fluid And Temperature Compatibility.
Excellent Contamination Exclusion.
Optimized Compounds Perform Reliably In Extreme Operating Conditions.
Features
- Keeps Lubricants in and Contaminants Out
- Optimized Compounds Perform Reliably In Extreme Operating Conditions
- Superior Fluid And Temperature Compatibility
- Excellent Contamination Exclusion
- See more on Amazon...
Brand: SKF | Manufacturer: SKF USA, Inc.
Dimensions: 0.63 x 2.50 x 2.50 inches | Weight: 0.05 pounds
Warranty: 12 Month 12,000 Miles
See On Amazon #7
SKF - DUAL-48W - DUAL COMPOUND FORK SEAL KIT WP 48 MM
Asin: B087YJ67WM | Ean: 8050040149728
Improved Feel And Smoothness.
Enhanced Water And Dirt Protection.
Increased Life And Performance.
20% Reduction Of Friction.
Features
- Low friction fork seal solution which improves feel and comfort, while increasing the reliability through better dirt exclusion.
- 20% Reduction of friction
- Improved feel and smoothness
- Increased life and performance
- Enhanced water and dirt protection
- See more on Amazon...
Brand: SKF | Manufacturer: SKF
Dimensions: 1.00 x 2.80 x 2.80 Inches
See On Amazon #8
SKF Seal Kit Fox 32mm Fits 2003-Current Forks
Asin: B00RIVI9N4 | Model: MTB32F | PartNumber: MTB32F | Ean: 8050040144020
User Friendly Design Makes For Quick Replacement During Fork Service.
Kits Include Enough Parts For One Fork.
Integrated Oil Sealing Lip Prevents Oil From Escaping The Fork.
Features
- Seal kit, 2003+ Fox - 32mm
- Integrated oil sealing lip prevents oil from escaping the fork
- User friendly design makes for quick replacement during fork service
- Kits include enough parts for one fork
- See more on Amazon...
Brand: SKF | Manufacturer: SKF
Dimensions: 0.75 x 5.25 x 4.50 Inches | Weight: 0.01 pounds
See On Amazon #9
SKF Scotseal Classic Rubber SEAL Replacement for Axle Shafts Trailer Automotive Industrial Heavy Duty 6" Bore Size Part: 46305
Asin: B008B5WNFQ | Model: 46305 | PartNumber: 46305 | Ean: 0085311036368 | UPC: 085311036368
Product Type: Auto_Part.
Most Orders Leave Warehouse Same Day.
Product Type: Auto Part.
Features
- Scotseal Classic Seal
- Product type: Auto Part
- Product type: Auto_Part
- Most orders leave warehouse same day
- See more on Amazon...
Brand: SKF | Manufacturer: SKF
Dimensions: 1.38 x 7.13 x 7.13 Inches | Weight: 0.80 Pounds
See On Amazon #10
SKF 35066 Front Wheel Seal
Asin: B005XV2X1K | Model: 35066 | PartNumber: 35066 | Ean: 0085311032438 | UPC: 085311032438
One Seal For One Wheel.
Includes Bore-Tire On Seal O.D..
Made In United States.
Features
- Package Weight : 2.971 pounds
- Made in United States
- One seal for one wheel
- Includes Bore-Tire on seal O.D.
- See more on Amazon...
Brand: SKF | Manufacturer: SKF
Dimensions: 1.13 x 6.03 x 6.00 Inches | Weight: 0.55 Pounds
See On Amazon #11
SKF 21352 Transfer Case Rear Output Shaft Seal Spring Loaded with Auxiliary Dirt Lip Positive Fluid Control Compatible with Chevrolet 1/2 Ton C1500 K1500 R1500 Series
Asin: B000C07NFS | Model: 21352 | PartNumber: 21352 | Ean: 0085311024044 | UPC: 085311024044
Seal Lip Profile All Skf Seals Incorporate A Seal Lip Design That Meets Or Exceeds The Oe Specifications. This Provides The Toughest Exclusion Of Dirt And Contaminants, Reliable Dynamic Sealing And A Long Service Life..
The Case Components Are Made From The Highest Grade Of Carbon Steel, And Are Coated With Phosphate To Ensure Protection Against Rust. Most Metal-Cased Seals Are Coated With Bore-Tite, A Flexible Coating On The Outside Diameter Of The Seal That Fills In Small Housing Bore Imperfections, And Provides A Tight And Leak Proof Seal..
Sealing Element Skf’S Synthetic Rubber Blends Are Formulated From Families Of Complex Polymers To Provide Protection To Operate In Temperatures As Low As Minus 40 Degrees To As High As 400 Degrees Fahrenheit. Today’S Lubricants With Their Aggressive Additive Packages Can Attack The Rubber Compound Of The Seal. Skf Seals Are Engineered To Be Compatible With These Lubricants.
Skf Has A Long History In Sealing Knowledge. From Our Patent On The First Automotive Wheel Seal In 1928, We Have Evolved To A Leading Supplier Of Automotive And Truck Sealing Technology. The Demand For Increased Speeds, Higher Operating Temperatures And Synthetic Lubricants With Aggressive Additives Increase The Stress On Oil And Grease Seals. Skf Seals Deliver Unparalleled Performance Over A Wide Range Of Operating Conditions For Most Automotive And Truck Applications..
Features
- Specifications: Shaft Dia in/mm: 2.125/53.980 | Bore Dia in/mm: 3.371/85.620 | Outer Dia in/mm: 3.376/85.750 | Width in/mm: 0.375/9.530 | Seal Construction Type: CRWA1 | Seal Lip Material: Nitrile | Boretite: Yes
- SKF has a long history in sealing knowledge. From our patent on the first automotive wheel seal in 1928, we have evolved to a leading supplier of automotive and truck sealing technology. The demand for increased speeds, higher operating temperatures and synthetic lubricants with aggressive additives increase the stress on oil and grease seals. SKF seals deliver unparalleled performance over a wide range of operating conditions for most automotive and truck applications.
- Seal lip profile All SKF seals incorporate a seal lip design that meets or exceeds the OE specifications. This provides the toughest exclusion of dirt and contaminants, reliable dynamic sealing and a long service life.
- Sealing element SKF s synthetic rubber blends are formulated from families of complex polymers to provide protection to operate in temperatures as low as minus 40 degrees to as high as 400 degrees Fahrenheit. Today s lubricants with their aggressive additive packages can attack the rubber compound of the seal. SKF seals are engineered to be compatible with these lubricants
- The case components are made from the highest grade of carbon steel, and are coated with phosphate to ensure protection against rust. Most metal-cased seals are coated with Bore-Tite, a flexible coating on the outside diameter of the seal that fills in small housing bore imperfections, and provides a tight and leak proof seal.
- See more on Amazon...
Brand: SKF | Manufacturer: Skf
Dimensions: 0.63 x 3.63 x 3.63 inches | Weight: 0.07 pounds
Warranty: 12 Month 12,000 Miles
See On Amazon #12
SKF Seal 16069 For Studebaker Avanti
Asin: B000EPP7XQ | Model: 16069 | PartNumber: 16069 | Ean: 0085311016674 | UPC: 085311016674
Superior Fluid And Temperature Compatibility.
Excellent Contamination Exclusion.
Optimized Compounds Perform Reliably In Extreme Operating Conditions.
Features
- Keeps Lubricants in and Contaminants Out
- Optimized Compounds Perform Reliably In Extreme Operating Conditions
- Superior Fluid And Temperature Compatibility
- Excellent Contamination Exclusion
- See more on Amazon...
Brand: SKF | Manufacturer: SKF
Dimensions: 0.63 x 2.50 x 2.50 Inches
Warranty: 12 Month 12,000 Miles
See On Amazon #13
SKF 18992 Transfer Case Rear Output Shaft Seal Spring Loaded Compatible with Chevrolet Astro Safari Blazer Colorado Canyon Luv S10 Blazer S15 Jimmy S10 S15 Sonoma SSR T10 Blazer T15 Jimmy
Asin: B000C09NX8 | Model: 18992 | PartNumber: 18992 | Ean: 0085311021005 | UPC: 085311021005
Seal Lip Profile All Skf Seals Incorporate A Seal Lip Design That Meets Or Exceeds The Oe Specifications. This Provides The Toughest Exclusion Of Dirt And Contaminants, Reliable Dynamic Sealing And A Long Service Life..
The Case Components Are Made From The Highest Grade Of Carbon Steel, And Are Coated With Phosphate To Ensure Protection Against Rust. Most Metal-Cased Seals Are Coated With Bore-Tite, A Flexible Coating On The Outside Diameter Of The Seal That Fills In Small Housing Bore Imperfections, And Provides A Tight And Leak Proof Seal..
Sealing Element Skf’S Synthetic Rubber Blends Are Formulated From Families Of Complex Polymers To Provide Protection To Operate In Temperatures As Low As Minus 40 Degrees To As High As 400 Degrees Fahrenheit. Today’S Lubricants With Their Aggressive Additive Packages Can Attack The Rubber Compound Of The Seal. Skf Seals Are Engineered To Be Compatible With These Lubricants.
Skf Has A Long History In Sealing Knowledge. From Our Patent On The First Automotive Wheel Seal In 1928, We Have Evolved To A Leading Supplier Of Automotive And Truck Sealing Technology. The Demand For Increased Speeds, Higher Operating Temperatures And Synthetic Lubricants With Aggressive Additives Increase The Stress On Oil And Grease Seals. Skf Seals Deliver Unparalleled Performance Over A Wide Range Of Operating Conditions For Most Automotive And Truck Applications..
Features
- Specifications: Shaft Dia in/mm: 1.886/47.900 | Bore Dia in/mm: 2.700/68.580 | Outer Dia in/mm: 2.704/68.680 | Width in/mm: 0.550/13.970 | Seal Construction Type: HMSA16 | Seal Lip Material: Polyacrylate | Boretite: Yes
- SKF has a long history in sealing knowledge. From our patent on the first automotive wheel seal in 1928, we have evolved to a leading supplier of automotive and truck sealing technology. The demand for increased speeds, higher operating temperatures and synthetic lubricants with aggressive additives increase the stress on oil and grease seals. SKF seals deliver unparalleled performance over a wide range of operating conditions for most automotive and truck applications.
- Seal lip profile All SKF seals incorporate a seal lip design that meets or exceeds the OE specifications. This provides the toughest exclusion of dirt and contaminants, reliable dynamic sealing and a long service life.
- Sealing element SKF s synthetic rubber blends are formulated from families of complex polymers to provide protection to operate in temperatures as low as minus 40 degrees to as high as 400 degrees Fahrenheit. Today s lubricants with their aggressive additive packages can attack the rubber compound of the seal. SKF seals are engineered to be compatible with these lubricants
- The case components are made from the highest grade of carbon steel, and are coated with phosphate to ensure protection against rust. Most metal-cased seals are coated with Bore-Tite, a flexible coating on the outside diameter of the seal that fills in small housing bore imperfections, and provides a tight and leak proof seal.
- See more on Amazon...
Brand: SKF | Manufacturer: SKF
Dimensions: 0.63 x 3.63 x 3.63 Inches | Weight: 0.02 pounds
Warranty: 12 Month 12,000 Miles
See On Amazon #14
SKF Oil Fill 4-Bolt Hubcap, 4.313" Outer Diameter Bearing Cap Seal 1608 For Ford Freightliner
Asin: B008B66CO8 | Model: 1608 | PartNumber: 1608 | Ean: 0085311193290 | UPC: 085311193290
Scotseal Stamped Steel Zinc-Plated And Protected With Weather-Resistant Armor To Resist Rust And Rough Wear. Available In 3- To 8-Bolt Designs..
Designed For Today’S Grease-Packed Systems, The Tamper-Proof Scotseal Tf Hubcap Features A Patented “Umbrella” Style Valve That Seals Contamination Out, Yet Vents Internal Pressure As Low As 2 P.S.I. The Addition Of A Splash Plate To The Hubcap Design Helps Protect Against The Harsh Conditions Created By Road Spray, Power Washers And Flooded Docks..
Skf Has A Long History In Sealing Knowledge. From Our Patent On The First Automotive Wheel Seal In 1928, We Have Evolved To A Leading Supplier Of Automotive And Truck Sealing Technology. The Demand For Increased Speeds, Higher Operating Temperatures And Synthetic Lubricants With Aggressive Additives Increase The Stress On Oil And Grease Seals. Skf Seals Deliver Unparalleled Performance Over A Wide Range Of Operating Conditions For Most Automotive And Truck Applications..
There Are Other Hubcaps On The Market, But None Providing Better Wheel-End Protection Than Scotseal Tf Hubcaps. Check Out All The Special Features Shown Here, Each Designed To Protect Your Wheel End Components And Extend The Service Life Of Bearings And Hub Units. For Well Over A Decade, Tf Hubcaps Have Helped Fleets Log Literally Billions Of Trouble-Free Miles. But What Else Would You Expect From The Company That Has Led The Way In Advanced Bearing And Seal Technologies For 100 Years..
Skf Scotseal Tf Hubcaps Equipped For P.S.I. The Skf Hubcap Line Just Got Stronger. You Can Now Equip Your Trailers With The Skf Scotseal Tf Hubcaps You Prefer. Skf Hubcaps Equipped For P.S.I. Incorporate The Same Durable And Leak-Proof Technology You Count On From The Skf Scotseal Tf Hubcaps. Four New Skf Hubcaps Are Compatible With The Meritor Tire Inflation System (Mtis) By P.S.I., An Automatic Tire Inflation System (Atis)..
Features
- Axle Extension: 1.7450 in / Bolt Circle Diameter: 3.6250 in / Bolt Size: 0.3490 in / Outer Diameter: 4.3130 in / Height: 2.0240 in / Number of Bolts: 4 / Inner Diameter: 2.3800 in
- SKF Scotseal TF hubcaps equipped for P.S.I. The SKF hubcap line just got stronger. You can now equip your trailers with the SKF Scotseal TF hubcaps you prefer. SKF hubcaps equipped for P.S.I. incorporate the same durable and leak-proof technology you count on from the SKF Scotseal TF hubcaps. Four new SKF hubcaps are compatible with the Meritor Tire Inflation System (MTIS) by P.S.I., an automatic tire inflation system (ATIS).
- Scotseal Stamped Steel Zinc-plated and protected with weather-resistant armor to resist rust and rough wear. Available in 3- to 8-bolt designs.
- There are other hubcaps on the market, but none providing better wheel-end protection than Scotseal TF Hubcaps. Check out all the special features shown here, each designed to protect your wheel end components and extend the service life of bearings and hub units. For well over a decade, TF Hubcaps have helped fleets log literally billions of trouble-free miles. But what else would you expect from the company that has led the way in advanced bearing and seal technologies for 100 years.
- Designed for today s grease-packed systems, the Tamper-Proof Scotseal TF Hubcap features a patented umbrella style valve that seals contamination out, yet vents internal pressure as low as 2 P.S.I. The addition of a splash plate to the hubcap design helps protect against the harsh conditions created by road spray, power washers and flooded docks.
- SKF has a long history in sealing knowledge. From our patent on the first automotive wheel seal in 1928, we have evolved to a leading supplier of automotive and truck sealing technology. The demand for increased speeds, higher operating temperatures and synthetic lubricants with aggressive additives increase the stress on oil and grease seals. SKF seals deliver unparalleled performance over a wide range of operating conditions for most automotive and truck applications.
- See more on Amazon...
Brand: SKF | Manufacturer: SKF
Dimensions: 3.25 x 4.75 x 4.75 Inches
See On Amazon #15
SKF 22550 Grease Seals
Asin: B000EPP9Z2 | Model: 22550 | PartNumber: 22550 | Ean: 0085311025126 | UPC: 085311025126
Brand: SKF | Manufacturer: SKF
Dimensions: 0.63 x 3.63 x 3.63 Inches | Weight: 0.10 Pounds
See On Amazon #16
SKF Front Wheel Hub and Bearing Assembly BR930963 Spindle Knuckle Flange For 4x4 4wd 2017 2018 2019 2020 Ford F250 F350 SRW (Single Rear Wheel) Super Duty
Asin: B0BCTPQFCK | Model: BR930963 | PartNumber: BR930963 | Ean: 0085311568739 | UPC: 085311568739
Product Must Be Installed By Knowledgeable Mechanic Using Correct Tooling And In Strict Accordance With Skf Instructions And The Vehicle Mounting Instructions..
Skf-Backed Quality And Reliability Meets Or Exceeds All Oe Specifications.
Scan Qr Code On Box Product Label To Access Skf Instructions And More Detailed Product And Technical Information.
Vehicle Safety Is A Skf Priority And Our High Quality Parts Are Designed For Safe And Lasting Repairs..
Features
- Includes all components needed to perform a complete Wheel Bearing replacement.
- Vehicle safety is a SKF priority and our high quality parts are designed for safe and lasting repairs.
- Product must be installed by knowledgeable mechanic using correct tooling and in strict accordance with SKF instructions and the vehicle mounting instructions.
- Scan QR code on box product label to access SKF instructions and more detailed product and technical information
- SKF-backed quality and reliability meets or exceeds all OE specifications
- See more on Amazon...
Brand: SKF | Manufacturer: SKF
Dimensions: 3.13 x 15.97 x 7.64 Inches | Weight: 25.20 Pounds
See On Amazon #17
SKF Oil Fill 6-Bolt Hubcap, 5.25" Outer Diameter Bearing Cap Seal 1612 for Ford Volvo Freightliner Kenworth Peterbilt
Asin: B001RUZ1D8 | Model: 1612 | PartNumber: 1612 | Ean: 0085311195119, 0028266897677 | UPC: 085311195119, 028266897677
Skf Scotseal Tf Hubcaps: Lighter Than Steel. Tougher Than Aluminum.
Designed For Today’S Grease-Packed Systems, The Tamper-Proof Scotseal Tf Hubcap Features A Patented “Umbrella” Style Valve That Seals Contamination Out, Yet Vents Internal Pressure As Low As 2 P.S.I. The Addition Of A Splash Plate To The Hubcap Design Helps Protect Against The Harsh Conditions Created By Road Spray, Power Washers And Flooded Docks..
There Are Other Hubcaps On The Market, But None Providing Better Wheel-End Protection Than Scotseal Tf Hubcaps. Check Out All The Special Features Shown Here, Each Designed To Protect Your Wheel End Components And Extend The Service Life Of Bearings And Hub Units. For Well Over A Decade, Tf Hubcaps Have Helped Fleets Log Literally Billions Of Trouble-Free Miles. But What Else Would You Expect From The Company That Has Led The Way In Advanced Bearing And Seal Technologies For 100 Years..
Skf Scotseal Tf Hubcaps Equipped For P.S.I. The Skf Hubcap Line Just Got Stronger. You Can Now Equip Your Trailers With The Skf Scotseal Tf Hubcaps You Prefer. Skf Hubcaps Equipped For P.S.I. Incorporate The Same Durable And Leak-Proof Technology You Count On From The Skf Scotseal Tf Hubcaps. Four New Skf Hubcaps Are Compatible With The Meritor Tire Inflation System (Mtis) By P.S.I., An Automatic Tire Inflation System (Atis)..
Features
- Scotseal Stamped Steel Zinc-plated and protected with weather-resistant armor to resist rust and rough wear. Available in 3- to 8-bolt designs.
- SKF Scotseal TF hubcaps equipped for P.S.I. The SKF hubcap line just got stronger. You can now equip your trailers with the SKF Scotseal TF hubcaps you prefer. SKF hubcaps equipped for P.S.I. incorporate the same durable and leak-proof technology you count on from the SKF Scotseal TF hubcaps. Four new SKF hubcaps are compatible with the Meritor Tire Inflation System (MTIS) by P.S.I., an automatic tire inflation system (ATIS).
- SKF Scotseal TF Hubcaps: Lighter than steel. Tougher than aluminum
- There are other hubcaps on the market, but none providing better wheel-end protection than Scotseal TF Hubcaps. Check out all the special features shown here, each designed to protect your wheel end components and extend the service life of bearings and hub units. For well over a decade, TF Hubcaps have helped fleets log literally billions of trouble-free miles. But what else would you expect from the company that has led the way in advanced bearing and seal technologies for 100 years.
- Designed for today s grease-packed systems, the Tamper-Proof Scotseal TF Hubcap features a patented umbrella style valve that seals contamination out, yet vents internal pressure as low as 2 P.S.I. The addition of a splash plate to the hubcap design helps protect against the harsh conditions created by road spray, power washers and flooded docks.
- See more on Amazon...
Brand: SKF | Manufacturer: SKF
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 0.85 Pounds
See On Amazon #18
SKF Seal 28600 Axle Shaft For Ford Excursion F-250 F-350 F450
Asin: B000JZY4KI | Model: 28600 | PartNumber: 28600 | Ean: 0085311395359 | UPC: 085311395359
Superior Fluid And Temperature Compatibility.
Excellent Contamination Exclusion.
Optimized Compounds Perform Reliably In Extreme Operating Conditions.
Features
- Keeps Lubricants in and Contaminants Out
- Optimized Compounds Perform Reliably In Extreme Operating Conditions
- Superior Fluid And Temperature Compatibility
- Excellent Contamination Exclusion
- See more on Amazon...
Brand: SKF | Manufacturer: SKF USA, Inc.
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 0.40 pounds
Warranty: 12 Month 12,000 Miles
See On Amazon #19
RockShox SKF Seal Kit Fox 36mm fits 2015-current Forks
Asin: B00RIVI5X8 | Ean: 8050040144181
Compound Is Compatible With A Wide Range Of Fork Oils And Is Engineered To Withstand Cracking From Uv Light.
Compared To Oem Seals, Skf Seals Provide Reduced Friction, Longer Life And Reduced Air Suction Into The Forks Lower Leg Assembly.
The Same Self-Lubricating Compound As On Skfs Motorcycle Fork Seals.
Features
- The seal kits consist of two oil seal-dirt scrapers, crush washers and pre-impregnated foam rings
- The same self-lubricating compound as on SKFs motorcycle fork seals
- Compound is compatible with a wide range of fork oils and is engineered to withstand cracking from UV light
- Compared to OEM seals, SKF seals provide reduced friction, longer life and reduced air suction into the forks lower leg assembly
- See more on Amazon...
Brand: RockShox | Manufacturer: SKF
Dimensions: 0.75 x 5.25 x 4.50 Inches | Weight: 0.01 Pounds
See On Amazon #20
SKF U-Joint UJ269 For Ford Chevrolet Jeep GMC
Asin: B07J5RX97G | Model: UJ269 | PartNumber: UJ269 | Ean: 0085311557429 | UPC: 085311557429
Item Package Quantity - 1.
Product Type - Auto Part.
Item Package Weight - 1.17 Pounds.
Features
- Item Package Dimension: 4.3L x 3.9W x 1.5H inches
- Item Package Weight - 1.17 Pounds
- Item Package Quantity - 1
- Product Type - AUTO PART
- See more on Amazon...
Brand: SKF | Manufacturer: SKF USA, Inc.
Dimensions: 1.25 x 3.50 x 3.50 Inches | Weight: 1.13 Pounds
See On Amazon #21
SKF Seal 21236 Auto Trans For Chevrolet GMC
Asin: B000C0AU4Y | Model: 21236 | PartNumber: 21236 | Ean: 0085311286930 | UPC: 085311286930
Brand: SKF | Manufacturer: SKF USA, Inc.
Dimensions: 0.63 x 3.63 x 3.63 Inches | Weight: 0.12 Pounds
Warranty: 12 Month 12,000 Miles
See On Amazon #22
SKF Seal 12437
Asin: B000EPODYA | Model: 12437 | PartNumber: 12437 | Ean: 0085311011211 | UPC: 085311011211
Superior Fluid And Temperature Compatibility.
Fit Type: Vehicle Specific.
Excellent Contamination Exclusion.
Optimized Compounds Perform Reliably In Extreme Operating Conditions.
Features
- Keeps Lubricants in and Contaminants Out
- Optimized Compounds Perform Reliably In Extreme Operating Conditions
- Superior Fluid And Temperature Compatibility
- Excellent Contamination Exclusion
- Fit type: Vehicle Specific
- See more on Amazon...
Brand: SKF | Manufacturer: SKF
Dimensions: 0.63 x 2.50 x 2.50 inches
Warranty: 12 Month 12,000 Miles
See On Amazon #23
SKF 19211 Transfer Case Mounting Adapter Seal Spring Loaded Positive Fluid Control Compatible with Dodge D-50 Pickup Power Ram 50 Raider Ram 50 AD150 AW150 D100 D150 P100 P150 W100
Asin: B000C09NZG | Model: 19211 | PartNumber: 19211 | Ean: 0085311021128 | UPC: 085311021128
Seal Lip Profile All Skf Seals Incorporate A Seal Lip Design That Meets Or Exceeds The Oe Specifications. This Provides The Toughest Exclusion Of Dirt And Contaminants, Reliable Dynamic Sealing And A Long Service Life..
The Case Components Are Made From The Highest Grade Of Carbon Steel, And Are Coated With Phosphate To Ensure Protection Against Rust. Most Metal-Cased Seals Are Coated With Bore-Tite, A Flexible Coating On The Outside Diameter Of The Seal That Fills In Small Housing Bore Imperfections, And Provides A Tight And Leak Proof Seal..
Sealing Element Skf’S Synthetic Rubber Blends Are Formulated From Families Of Complex Polymers To Provide Protection To Operate In Temperatures As Low As Minus 40 Degrees To As High As 400 Degrees Fahrenheit. Today’S Lubricants With Their Aggressive Additive Packages Can Attack The Rubber Compound Of The Seal. Skf Seals Are Engineered To Be Compatible With These Lubricants.
Skf Has A Long History In Sealing Knowledge. From Our Patent On The First Automotive Wheel Seal In 1928, We Have Evolved To A Leading Supplier Of Automotive And Truck Sealing Technology. The Demand For Increased Speeds, Higher Operating Temperatures And Synthetic Lubricants With Aggressive Additives Increase The Stress On Oil And Grease Seals. Skf Seals Deliver Unparalleled Performance Over A Wide Range Of Operating Conditions For Most Automotive And Truck Applications..
Features
- Specifications: Shaft Dia in/mm: 1.938/49.230 | Bore Dia in/mm: 2.563/65.100 | Outer Dia in/mm: 2.567/65.180 | Width in/mm: 0.313/7.950 | Seal Construction Type: CRW1 | Seal Lip Material: Nitrile | Boretite: Yes
- SKF has a long history in sealing knowledge. From our patent on the first automotive wheel seal in 1928, we have evolved to a leading supplier of automotive and truck sealing technology. The demand for increased speeds, higher operating temperatures and synthetic lubricants with aggressive additives increase the stress on oil and grease seals. SKF seals deliver unparalleled performance over a wide range of operating conditions for most automotive and truck applications.
- Seal lip profile All SKF seals incorporate a seal lip design that meets or exceeds the OE specifications. This provides the toughest exclusion of dirt and contaminants, reliable dynamic sealing and a long service life.
- Sealing element SKF s synthetic rubber blends are formulated from families of complex polymers to provide protection to operate in temperatures as low as minus 40 degrees to as high as 400 degrees Fahrenheit. Today s lubricants with their aggressive additive packages can attack the rubber compound of the seal. SKF seals are engineered to be compatible with these lubricants
- The case components are made from the highest grade of carbon steel, and are coated with phosphate to ensure protection against rust. Most metal-cased seals are coated with Bore-Tite, a flexible coating on the outside diameter of the seal that fills in small housing bore imperfections, and provides a tight and leak proof seal.
- See more on Amazon...
Brand: SKF | Manufacturer: SKF
Dimensions: 0.63 x 3.13 x 3.13 Inches | Weight: 0.05 Pounds
Warranty: 12 Month 12,000 Miles
See On Amazon #24
SKF 46300 Scotseal PlusXL Rubber Seal Gasket 4.6" Shaft Bore Diameter Replaces Axle Spindle Oil Bath Hub Bearing Metal Rib (Original Part Number 94001-3409)
Asin: B002ES8QTI | Model: 46300 | PartNumber: 46300 | Ean: 0085311298322 | UPC: 085311298322
Seal Lip Profile All Skf Seals Incorporate A Seal Lip Design That Meets Or Exceeds The Oe Specifications. This Provides The Toughest Exclusion Of Dirt And Contaminants, Reliable Dynamic Sealing And A Long Service Life..
The Case Components Are Made From The Highest Grade Of Carbon Steel, And Are Coated With Phosphate To Ensure Protection Against Rust. Most Metal-Cased Seals Are Coated With Bore-Tite, A Flexible Coating On The Outside Diameter Of The Seal That Fills In Small Housing Bore Imperfections, And Provides A Tight And Leak Proof Seal..
Sealing Element Skf’S Synthetic Rubber Blends Are Formulated From Families Of Complex Polymers To Provide Protection To Operate In Temperatures As Low As Minus 40 Degrees To As High As 400 Degrees Fahrenheit. Today’S Lubricants With Their Aggressive Additive Packages Can Attack The Rubber Compound Of The Seal. Skf Seals Are Engineered To Be Compatible With These Lubricants..
Skf Has A Long History In Sealing Knowledge. From Our Patent On The First Automotive Wheel Seal In 1928, We Have Evolved To A Leading Supplier Of Automotive And Truck Sealing Technology. The Demand For Increased Speeds, Higher Operating Temperatures And Synthetic Lubricants With Aggressive Additives Increase The Stress On Oil And Grease Seals. Skf Seals Deliver Unparalleled Performance Over A Wide Range Of Operating Conditions For Most Automotive And Truck Applications..
Features
- Specifications: Outer Diameter: 6.014 in / Width: .912 in / Bore: 6.001 in / Boretite: No / Shaft: 4.6250 in
- SKF has a long history in sealing knowledge. From our patent on the first automotive wheel seal in 1928, we have evolved to a leading supplier of automotive and truck sealing technology. The demand for increased speeds, higher operating temperatures and synthetic lubricants with aggressive additives increase the stress on oil and grease seals. SKF seals deliver unparalleled performance over a wide range of operating conditions for most automotive and truck applications.
- Seal lip profile All SKF seals incorporate a seal lip design that meets or exceeds the OE specifications. This provides the toughest exclusion of dirt and contaminants, reliable dynamic sealing and a long service life.
- Sealing element SKF s synthetic rubber blends are formulated from families of complex polymers to provide protection to operate in temperatures as low as minus 40 degrees to as high as 400 degrees Fahrenheit. Today s lubricants with their aggressive additive packages can attack the rubber compound of the seal. SKF seals are engineered to be compatible with these lubricants.
- The case components are made from the highest grade of carbon steel, and are coated with phosphate to ensure protection against rust. Most metal-cased seals are coated with Bore-Tite, a flexible coating on the outside diameter of the seal that fills in small housing bore imperfections, and provides a tight and leak proof seal.
- See more on Amazon...
Brand: SKF | Manufacturer: SKF
Dimensions: 1.13 x 6.00 x 6.00 Inches | Weight: 0.69 pounds
See On Amazon #25
SKF 35000 Rear Wheel Seal
Asin: B001KS0WKE | Model: 35000 | PartNumber: 35000 | Ean: 0085311032322 | UPC: 085311032322
Brand: SKF | Manufacturer: SKF
Dimensions: 1.13 x 6.03 x 6.03 Inches | Weight: 0.55 Pounds
See On Amazon #26
SKF 99215 Speedi Sleeve and Tool Kit, Inch, 2.165in Shaft Diameter, 0.787in Width
Asin: B000EPR7HK | Model: 99215 | PartNumber: 99215 | Ean: 0085311041775 | UPC: 085311041775
"Skf Speedi-Sleeve. These Thin-Walled Stainless Steel Shaft Repair Sleeves Can Come To Immediate Rescue When A Crankshaft Needs A New Sealing Surface. ".
While Installation Is Simple, It Must Be Done With Care In Order To Assure Proper Results. An Installation Tool Is Packaged With Every Sleeve.
"Low In Cost, A Speedi-Sleeve Is Slipped Over The Worn Area Quickly And Easily, And Provides A Surface That Is Actually Harder Than That Of A New Shaft. The Same Size Seal (As The One Being Replaced) Fits Snugly Onto The New Surface. And Each Speedi-Sleeve Comes As A Kit With A Disposable Installation Tool. ".
The Standard Range Of Skf Speedisleeve Sizes Covers Shaft Diameters From .472” To 8” (12 Mm To 200 Mm). The Skf Speedi-Sleeve Is Thinwalled, 0.011” (0,28 Mm), And Made Of High Quality Stainless Steel. The Contact Surface Is Wearresistant With A Finish Of Ra 10 To 20 Μin (0,25 To 0,5 Μm). No Expensive Machining Or Preparation Is Required Before Mounting. Downtime Is Reduced Since Installation Only Takes A Few Minutes.
Features
- The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shaft. It s quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface. Many popular regrinding and refinishing techniques produce a surface that cannot be properly sealed
- The standard range of SKF SPEEDISLEEVE sizes covers shaft diameters from .472 to 8 (12 mm to 200 mm). The SKF SPEEDI-SLEEVE is thinwalled, 0.011 (0,28 mm), and made of high quality stainless steel. The contact surface is wearresistant with a finish of Ra 10 to 20 in (0,25 to 0,5 m). No expensive machining or preparation is required before mounting. Downtime is reduced since installation only takes a few minutes
- SKF SPEEDI-SLEEVE. These thin-walled stainless steel shaft repair sleeves can come to immediate rescue when a crankshaft needs a new sealing surface.
- Low in cost, a SPEEDI-SLEEVE is slipped over the worn area quickly and easily, and provides a surface that is actually harder than that of a new shaft. The same size seal (as the one being replaced) fits snugly onto the new surface. And each SPEEDI-SLEEVE comes as a kit with a disposable installation tool.
- While installation is simple, it must be done with care in order to assure proper results. An installation tool is packaged with every sleeve
- See more on Amazon...
Brand: SKF | Manufacturer: SKF USA
Dimensions: 1.75 x 4.25 x 4.25 Inches | Weight: 0.23 Pounds
Warranty: One Year Warranty
See On Amazon #27
SKF Hub Bearing Assembly BR930219 For Jeep 99-06
Asin: B000EM0CX4 | Model: BR930219 | PartNumber: BR930219 | Ean: 0085311291330 | UPC: 085311291330
Sealed For Life Design Ensures Problem Free Operation.
Dynamic Load Carry Capacity.
Unitized Assembly With No Periodic Maintenance Needed.
Fully Integrated Mounting And Wheel Flange.
Fully Integrated Mounting And Wheel Flange.
Skf Quality And Design That You Can Count On.
Made From Heat Treated High Carbon Steel For Superior Strength.
Features
- Manufactured To Precision Specifications Using Premium Materials For Problem Free Operation
- Made From Heat Treated High Carbon Steel For Superior Strength
- Sealed For Life Design Ensures Problem Free Operation
- Skf Quality And Design That You Can Count On
- Fully integrated mounting and wheel flange
- Fully integrated mounting and wheel flange
- Dynamic load carry capacity
- Unitized assembly with no periodic maintenance needed
- See more on Amazon...
First Available: 07/01/2016
Brand: SKF | Manufacturer: SKF USA, Inc.
Dimensions: 6.50 x 6.81 x 6.25 Inches | Weight: 10.70 Pounds
Warranty: 12 Month 12,000 Miles
See On Amazon #28
SKF U-Joint UJ20057 For Jeep
Asin: B07J5Q6M33 | Model: UJ20057 | PartNumber: UJ20057 | Ean: 0085311559843 | UPC: 085311559843
Brand: SKF | Manufacturer: SKF USA, Inc.
See On Amazon #29
SKF Seal 17146 Freightliner
Asin: B000EPOF5C | Model: 17146 | PartNumber: 17146 | Ean: 0085311018098 | UPC: 085311018098
Item Package Quantity - 1.
Product Type - Auto Part.
Item Package Weight - 0.02 Pounds.
Features
- Item Package Dimension: 3.2L x 3.2W x 0.5H inches
- Item Package Weight - 0.02 Pounds
- Item Package Quantity - 1
- Product Type - AUTO PART
- See more on Amazon...
Brand: SKF | Manufacturer: SKF
Dimensions: 0.63 x 3.13 x 3.13 Inches | Weight: 0.02 pounds
Warranty: 12 Month 12,000 Miles
See On Amazon #30
SKF Seal - 11066
Asin: B002ESDEX6 | Model: 11066 | PartNumber: 11066 | Ean: 0085311009386 | UPC: 085311009386
Brand: SKF | Manufacturer: SKF USA, Inc.
Weight: 0.04 Pounds
Warranty: 12 Month 12,000 Miles
See On Amazon