Speed Engineering - Buying Guide
Last Updated: 03/28/2024
Share on
Bestselling from Speed Engineering on Amazon
- WILWOOD 2.5" DROP PROSPINDLES,PAIR,COMPATIBLE WITH 71-87 HEVY C10,R10,GM C1500,R1500,SUBURBAN,2WD
- WILWOOD DISC BRAKE KIT,FRONT,11" ROTORS,BLACK CALIPERS,4 PISTON,COMPATIBLE WITH 2" DROP AFX PROSPIND...
- WILWOOD 2" DROP PROSPINDLES,PAIR,COMPATIBLE WITH G 73-77 A-BODY,70-81 F-BODY,75-79 X-BODY,79-90 B-BODY
- Detroit Speed and Engineering - 121102 - Windshield Washer Pump Kit
- NEW WILWOOD FORGED DYNALITE INTERNAL BRAKE CALIPER,FDLI,0.81" ROTORS,1.38",BLACK
- WILWOOD MC4 MECHANICAL PARKING BRAKE CALIPER,RED,0.81" WIDE DISCS,RIGHT-SIDE
- NEW WILWOOD TANDEM MASTER CYLINDER,INTEGRAL RESERVOIR
- Engineered for Speed Quick Release Body Fastener Set 10 Pack YC-902-17 SLV
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
WILWOOD 2.5" DROP PROSPINDLES,PAIR,COMPATIBLE WITH 71-87 HEVY C10,R10,GM C1500,R1500,SUBURBAN,2WD
Asin: B09MJP2SWX
Compatible With: Сhevrolet: 1971-1986 C10 Pickup, 2Wd*1987 R10 Pickup, 2Wd | 1971-1986 C10 Suburban, 2Wd* | 1987 R10 Suburban, 2Wd | 1971-1982 Blazer, 2Wd* | Gmс: 1971-1986 C15/C1500 Pickup, 2Wd* | 1987 R1500 Pickup, 2Wd | 1971-1986 C15/C1500 Suburban, 2Wd* | 1987 R1500 Suburban, 2Wd | 1971-1982 Jimmy, 2Wd* | *Model Years 1971-1972 Require Updating To 1973-87 C10/C15 Upper & Lower Ball Joints, Which Are Not Included*.
Complete Kit Weighs Approximately 36 Lbs..
Wilwood's C10 Steel Prospindle Kits Contain A Pair Of One Piece Spindles And Integrated Steering Arms For 71-87 Сhevrolet & Gmс 2Wd C10/C15 Pickups And Suburbans. Specifically Designed For Use With Wilwood's Disc Brake Kits And With A 2.50" Drop For A More Aggressive Stance Without Affecting Steering Geometry. Constructed From A Proprietary Grade Of Cast Steel With A Traditional Bearing Snout That Supports Wilwood Kit Specific Hubs In Both 5 X 4.75" And 5 X 5.00" Or 6 X 5.50" Wheel Bolt Circles..
Note: This Prospindle Kit Fits The Following Cars Only When Used With These Compatible Wilwood Brake Kits: 140-15940, 140-15941, 140-15944, 140-15945.
Features
- Pair of Brand New Wilwood 2.5" Drop ProSpindles for G Pickups & SUVs with Compatible Wilwood Brakes (Part #831-15932).
- NOTE: This ProSpindle Kit fits the following cars only when used with these compatible Wilwood brake kits: 140-15940, 140-15941, 140-15944, 140-15945
- Compatible with: hevrolet: 1971-1986 C10 Pickup, 2WD*1987 R10 Pickup, 2WD | 1971-1986 C10 Suburban, 2WD* | 1987 R10 Suburban, 2WD | 1971-1982 Blazer, 2WD* | GM : 1971-1986 C15/C1500 Pickup, 2WD* | 1987 R1500 Pickup, 2WD | 1971-1986 C15/C1500 Suburban, 2WD* | 1987 R1500 Suburban, 2WD | 1971-1982 Jimmy, 2WD* | *Model years 1971-1972 require updating to 1973-87 C10/C15 upper & lower ball joints, which are not included*
- Wilwood's C10 Steel ProSpindle Kits contain a pair of one piece spindles and integrated steering arms for 71-87 hevrolet & GM 2WD C10/C15 Pickups and Suburbans. Specifically designed for use with Wilwood's disc brake kits and with a 2.50 drop for a more aggressive stance without affecting steering geometry. Constructed from a proprietary grade of cast steel with a traditional bearing snout that supports Wilwood kit specific hubs in both 5 x 4.75 and 5 x 5.00 or 6 x 5.50 wheel bolt circles.
- Complete kit weighs approximately 36 lbs.
- See more on Amazon...
Brand: Southwest Speed | Manufacturer: Wilwood Engineering
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.00 pounds
See On Amazon #2
WILWOOD DISC BRAKE KIT,FRONT,11" ROTORS,BLACK CALIPERS,4 PISTON,COMPATIBLE WITH 2" DROP AFX PROSPINDLE,73-77 A-BODY,70-81 F-BODY,75-79 X-BODY,79-90 B-BODY
Asin: B09M4FWDHJ
Оldsmobile: 1977-1985 Custom Cruiser (11” Oem) | 1973-1977 442 | 1973-1977 Cutlass/Cutlass Supreme | 1977-1985 Delta 88 (11” Oem) | 1975-1979 Omega | 1973-1975 Vista Cruiser | Рontiac: 1977-1981 Bonneville | 1977-1981 Catalina | 1970-1981 Firebird | 1973-1975 Grand Am | 1973-1977 Grand Prix | 1973 Gto | 1973-1977 Lemans | 1980-1986 Parisienne (11” Oem) | 1977-1979 Phoenix (11” Oem) | 1975-1977 Ventura.
This Fdl-M Classic Style Kit Is Designed For The Afx Pro Spindles. Afx Pro Spindles Fit 1973-1977 Gm A Body, 1970-1981 Gm F Body, 1975-1979 Gm X Body, And 1979-90 B-Body (Originally Equipped With 11” Rotors) Vehicles. Fdl-M Classic Style Kits Feature 11.00", 1 Piece Iron Rotor And Hub Assemblies, Forged Dynalite-M 4-Piston Calipers To Deliver The Ultimate Combination For Braking Power. Fdl-M Classic Style Enhance Tire And Suspension Upgrades On Street And Track Machines..
Includes: 1.00" Thick X 11.00" O.D. 1-Piece Hubs And Rotors | Forged Dynalite Fdl-M 4 Piston Calipers - Black | Caliper Mounting Brackets | Bp-10 Smart Compound | Brake Pads | Bearings | Seals | All Necessary Hardware To Install The Complete Braking System On Both Front Wheels | Complete Kit Weighs Approximately 58 Lbs. | These Brake Kits Require At Least 15" Diameter Wheels..
Compatible With: Сadillac: 1976 Seville | Сhevrolet: 1970-1981 Сamaro | 1979-1990 Caprice (11” Oem) | 1973-1977 Chevelle | 1973-1977 El Camino | 1977-1985 Impala (11” Oem) | 1973-1976 Laguna | 1973-1977 Malibu | 1973-1977 Monte Carlo | 1975-1979 Nova | Вuick: 1975 Apollo | 1973-1977 Century | 1977-1983 Estate Wagon (11” Oem) | 1977-1985 Lesabre (11” Oem) | 1973-1977 Regal | 1975-1979 Skylark | Gmс: 1973-1977 Sprint.
Features
- Brand New Wilwood Classic Series Bolt-On Front 11.00" Disc Brake Kit (Part #140-15980) for Both Front Wheels. | NOTE: This brake kit fits the following vehicles only when used with Wilwood 2" Drop AFX 2nd Gen. ProSpindles
- Compatible with: adillac: 1976 Seville | hevrolet: 1970-1981 amaro | 1979-1990 Caprice (11 OEM) | 1973-1977 Chevelle | 1973-1977 El Camino | 1977-1985 Impala (11 OEM) | 1973-1976 Laguna | 1973-1977 Malibu | 1973-1977 Monte Carlo | 1975-1979 Nova | uick: 1975 Apollo | 1973-1977 Century | 1977-1983 Estate Wagon (11 OEM) | 1977-1985 LeSabre (11 OEM) | 1973-1977 Regal | 1975-1979 Skylark | GM : 1973-1977 Sprint
- ldsmobile: 1977-1985 Custom Cruiser (11 OEM) | 1973-1977 442 | 1973-1977 Cutlass/Cutlass Supreme | 1977-1985 Delta 88 (11 OEM) | 1975-1979 Omega | 1973-1975 Vista Cruiser | ontiac: 1977-1981 Bonneville | 1977-1981 Catalina | 1970-1981 Firebird | 1973-1975 Grand Am | 1973-1977 Grand Prix | 1973 GTO | 1973-1977 LeMans | 1980-1986 Parisienne (11 OEM) | 1977-1979 Phoenix (11 OEM) | 1975-1977 Ventura
- Includes: 1.00 Thick x 11.00 O.D. 1-piece Hubs and Rotors | Forged Dynalite FDL-M 4 Piston Calipers - Black | Caliper Mounting Brackets | BP-10 Smart Compound | Brake Pads | Bearings | Seals | All necessary hardware to install the complete braking system on both front wheels | Complete kit weighs approximately 58 lbs. | These Brake kits require at least 15 diameter wheels.
- This FDL-M Classic Style Kit is designed for the AFX Pro spindles. AFX Pro Spindles fit 1973-1977 GM A Body, 1970-1981 GM F Body, 1975-1979 GM X Body, and 1979-90 B-body (originally equipped with 11 rotors) vehicles. FDL-M Classic Style Kits feature 11.00, 1 Piece Iron Rotor and Hub assemblies, Forged Dynalite-M 4-piston calipers to deliver the ultimate combination for braking power. FDL-M Classic Style enhance tire and suspension upgrades on street and track machines.
- See more on Amazon...
Brand: Southwest Speed | Manufacturer: Wilwood Engineering
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.00 pounds
See On Amazon #3
WILWOOD 2" DROP PROSPINDLES,PAIR,COMPATIBLE WITH G 73-77 A-BODY,70-81 F-BODY,75-79 X-BODY,79-90 B-BODY
Asin: B09KP3PMF7
Оldsmobile: 1977-1985 Custom Cruiser (11” Oem) | 1973-1977 442 | 1973-1977 Cutlass/Cutlass Supreme | 1977-1985 Delta 88 (11” Oem) | 1975-1979 Omega | 1973-1975 Vista Cruiser | Рontiac: 1977-1981 Bonneville | 1977-1981 Catalina | 1970-1981 Firebird | 1973-1975 Grand Am | 1973-1977 Grand Prix | 1973 Gto | 1973-1977 Lemans | 1980-1986 Parisienne (11” Oem) | 1977-1979 Phoenix (11” Oem) | 1975-1977 Ventura.
Improve The Handling And Braking Of 1970-1981 Gm F-Body, 1975-1979 X-Body, 1973-77 A-Body, And 1979-90 B-Body (Originally Equipped With 11" Rotors) Vehicles. A 2.00” Drop Lowers The Center Of Gravity For Less Body Roll And Improved Looks, Without Affecting Steering Geometry. Installs Using Oe Ball Joints With Original Or Aftermarket Control Arms..
Wilwood's Afx 2Nd Gen Prospindle Kits Contain A Pair Of High-Strength Steel Spindles With A More Rigid Steering Arm, Eliminating The Archaic Gm Factory Sliding Caliper Mount. These Spindles Are Engineered To Simplify Upgrades By Directly Mounting Wilwood Calipers And Performance Disc Brake Kits..
Compatible With: Сadillac: 1976 Seville | Сhevrolet: 1970-1981 Сamaro | 1979-1990 Caprice (11” Oem) | 1973-1977 Chevelle | 1973-1977 El Camino | 1977-1985 Impala (11” Oem) | 1973-1976 Laguna | 1973-1977 Malibu | 1973-1977 Monte Carlo | 1975-1979 Nova | Вuick: 1975 Apollo | 1973-1977 Century | 1977-1983 Estate Wagon (11” Oem) | 1977-1985 Lesabre (11” Oem) | 1973-1977 Regal | 1975-1979 Skylark | Gmс: 1973-1977 Sprint.
Features
- Pair of Brand New Wilwood 2" Drop ProSpindles for A-Body, F-Body, X-Body vehicles with Compatible Wilwood Brakes (Part #831-15958).
- Compatible with: adillac: 1976 Seville | hevrolet: 1970-1981 amaro | 1979-1990 Caprice (11 OEM) | 1973-1977 Chevelle | 1973-1977 El Camino | 1977-1985 Impala (11 OEM) | 1973-1976 Laguna | 1973-1977 Malibu | 1973-1977 Monte Carlo | 1975-1979 Nova | uick: 1975 Apollo | 1973-1977 Century | 1977-1983 Estate Wagon (11 OEM) | 1977-1985 LeSabre (11 OEM) | 1973-1977 Regal | 1975-1979 Skylark | GM : 1973-1977 Sprint
- ldsmobile: 1977-1985 Custom Cruiser (11 OEM) | 1973-1977 442 | 1973-1977 Cutlass/Cutlass Supreme | 1977-1985 Delta 88 (11 OEM) | 1975-1979 Omega | 1973-1975 Vista Cruiser | ontiac: 1977-1981 Bonneville | 1977-1981 Catalina | 1970-1981 Firebird | 1973-1975 Grand Am | 1973-1977 Grand Prix | 1973 GTO | 1973-1977 LeMans | 1980-1986 Parisienne (11 OEM) | 1977-1979 Phoenix (11 OEM) | 1975-1977 Ventura
- Wilwood's AFX 2nd Gen ProSpindle Kits contain a pair of high-strength steel spindles with a more rigid steering arm, eliminating the archaic GM factory sliding caliper mount. These spindles are engineered to simplify upgrades by directly mounting Wilwood calipers and performance disc brake kits.
- Improve the handling and braking of 1970-1981 GM F-body, 1975-1979 X-body, 1973-77 A-body, and 1979-90 B-body (originally equipped with 11 rotors) vehicles. A 2.00 drop lowers the center of gravity for less body roll and improved looks, without affecting steering geometry. Installs using OE ball joints with original or aftermarket control arms.
- See more on Amazon...
Brand: Southwest Speed | Manufacturer: Wilwood Engineering
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.00 pounds
See On Amazon #4
NEW WILWOOD FORGED DYNALITE INTERNAL BRAKE CALIPER,FDLI,0.81" ROTORS,1.38",BLACK
Asin: B07RZV39X3
Forged Dynalite Internal Calipers Are A Direct Replacement For All Wilwood Dynalite And Similar Competitive Brand Calipers With 5.25" Centered Mounting Lugs. The Fdli Uses The Same 7112 Type Brake Pad Used In All Earlier Versions Of This Caliper. The Full Range Of Polymatrix Pad Compounds Is Available To Match Brake Response And Heat Range To Any Application..
Features: Designed To Fit 0.81" Thick Rotors, But Will Fit From 0.75" To 0.83" Thick | Fits 10" To 13.06" Diameter Rotors | Features Four 1.38" Pistons | Powder-Coated Black.
Features
- Brand New Wilwood Powder-Coated Black Forged Dynalite Internal Racing Brake Caliper (Part #120-13839-BK).
- Features: Designed to fit 0.81 Thick rotors, but will fit from 0.75 to 0.83 Thick | Fits 10 to 13.06 Diameter rotors | Features Four 1.38 Pistons | Powder-coated Black
- Forged Dynalite Internal calipers are a direct replacement for all Wilwood Dynalite and similar competitive brand calipers with 5.25 centered mounting lugs. The FDLI uses the same 7112 type brake pad used in all earlier versions of this caliper. The full range of PolyMatrix pad compounds is available to match brake response and heat range to any application.
- See more on Amazon...
Brand: Southwest Speed | Manufacturer: Wilwood Engineering
Weight: 0.00 pounds
See On Amazon #5
WILWOOD MC4 MECHANICAL PARKING BRAKE CALIPER,RED,0.81" WIDE DISCS,RIGHT-SIDE
Asin: B07QW393FR
For Mounting On The Right (Passengers) Side | Fits 0.81" Wide Rotors With An Outside Diameter From 11" To 12.90" | Features One 1.19" Piston | Can Be Mounted As A Sliding Caliper With The 2 Pins That Are 3.00" Center-To-Center, Or Can Be Fixed-Mounted With The Gold Bracket That Has Threaded Holes That Are 4.75" Center-To-Center | Compact, Low Profile Parking Brake Caliper | High Strength Forged Aluminum Outboard Anvil | Increased Pad Area & Volue With Noise-Cancelling Shields.
Features
- Brand New Wilwood MC4 Mechanical Parking Brake Caliper with Pads, Right-Hand, with a Red Body (Part #120-12069-RD).
- For mounting on the Right (Passengers) Side | Fits 0.81 wide rotors with an outside diameter from 11 to 12.90 | Features one 1.19 Piston | Can be mounted as a sliding caliper with the 2 pins that are 3.00 center-to-center, or can be fixed-mounted with the gold bracket that has threaded holes that are 4.75 center-to-center | Compact, low profile Parking Brake caliper | High strength forged aluminum outboard anvil | Increased pad area & volue with noise-cancelling shields
- See more on Amazon...
Brand: Southwest Speed | Manufacturer: Wilwood Engineering
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.00 pounds
See On Amazon #6
NEW WILWOOD TANDEM MASTER CYLINDER,INTEGRAL RESERVOIR
Asin: B07CP4XD6S
Made From Durable Lightweight Aluminum With A Large Capacity Plastic Reservoir & Dual Outlet Bores, This Master Cylinder Utilizes Standard Oem Internal Compoents.
This Lightweight (2.5 Lbs) Reliable Master Cylinder Is Used For Drag Racing, Stock Cars, Street Rods, Off-Road Applications, Just To New A Few.
Standard Factory Mounting Bolt Holes Can Be Adapted To Racing Pedal Assemblies With An Optional Mounting Adapter Bracket (Wilwood Part #250-3677).
1 1/16" Bore Cylinder With Push Rod, Boot, & Retainer.
Features
- Brand New Wilwood Dual Outlet Tandem Integral Reservoir Master Cylinder with an 1 1/16" Bore (Part #260-4894).
- 1 1/16 Bore cylinder with push rod, boot, & retainer
- Made from durable lightweight aluminum with a large capacity plastic reservoir & dual outlet bores, this master cylinder utilizes standard OEM internal compoents
- Standard factory mounting bolt holes can be adapted to racing pedal assemblies with an optional mounting adapter bracket (Wilwood part #250-3677)
- This lightweight (2.5 lbs) reliable master cylinder is used for drag racing, stock cars, street rods, off-road applications, just to new a few
- See more on Amazon...
Brand: Southwest Speed | Manufacturer: Wilwood Engineering
See On Amazon