TEMO - Buying Guide
Last Updated: 05/13/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
TEMO 100 pc 1/2 Inch Sand Drum Grit 60 Coarse with 2 pc 1/8 Inch Mandrel for Dremel Rotary Tools
Asin: B00564U22G | Ean: 0723175192201 | UPC: 723175192201
Here Are Our Best Practices For Using Sand Drums. 1. Adjusting The Screw At The Top Of The Mandrel Will Loosen Or Tighten The Sand Drum. Make Sure The Sand Drum Is Held Tight To The Mandrel Before Use. 2. During Use, Periodically Power Down The Rotary Tool To Check The Sand Drum. Ensure That There Is Sufficient Grit Remaining On The Band Before Continuing..
Us-Based Customer Service: Available By Chat, Email, Phone, Or Visit Us At Our Customer Service Center In La Crosse, Wi..
3. Rotary Tools Can Operate At Very High Rpm. High Rpm With A Small Tool Such As A Sanding Drum Produces A Lot Of Friction And Heat Build Up. Ensure That Your Sand Drum And Mandrel Is Not Getting Too Hot. Consider Using Medium Speed And Alternating Mandrels As You Change Sand Drums Out To Reduce Heat Build Up.
4. Rotary Tools Are Power Tools. Always Consider Appropriate Eyewear And Other Ppe To Suit Your Task..
100 Piece 1/2" (12.7Mm) 60 Grit, 1/2" (12.7Mm) Diameter; 2 Piece 1/2" (12.7Mm) X 1/2" (12.7Mm) Rubber Mandrels; 1/8" (3.175Mm) Shank Size (For Dremel And Other Rotary Tools).
Features
- 100 PC 1/2" (12.7mm) sand drum with 2 Mandrel for dremel grit 60 coarse
- 100 piece 1/2 (12.7mm) 60 Grit, 1/2 (12.7mm) Diameter; 2 piece 1/2 (12.7mm) X 1/2 (12.7mm) Rubber Mandrels; 1/8 (3.175mm) shank size (for Dremel and other Rotary Tools)
- Here are our best practices for using sand drums. 1. Adjusting the screw at the top of the mandrel will loosen or tighten the sand drum. Make sure the sand drum is held tight to the mandrel before use. 2. During use, periodically power down the rotary tool to check the sand drum. Ensure that there is sufficient grit remaining on the band before continuing.
- 3. Rotary tools can operate at very high RPM. High RPM with a small tool such as a sanding drum produces a lot of friction and heat build up. Ensure that your sand drum and mandrel is not getting too hot. Consider using medium speed and alternating mandrels as you change sand drums out to reduce heat build up.
4. Rotary tools are power tools. Always consider appropriate eyewear and other PPE to suit your task. - US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI.
- See more on Amazon...
Brand: TEMO | Manufacturer: Golden Coulee
Dimensions: 1.00 x 6.00 x 4.00 Inches | Weight: 4.00 ounces
See On Amazon #2
TEMO 10 pc 2 mm (5/64 Inch) Cut Off Wheel Screw Mandrel 1/8 Inch Shank Holder for Dremel Rotary Tools
Asin: B00C050UY4 | Ean: 0723175193147 | UPC: 723175193147
They Are Used To Hold Cutoff Wheel Discs..
Us-Based Customer Service: Available By Chat, Email, Phone, Or Visit Us At Our Customer Service Center In La Crosse, Wi..
1/8" (3.175Mm) Shank Size For Dremel And Other Rotary Tools..
10 Piece 2Mm Screw Mandrel Set..
Features
- 10pc 2mm Screw Mandrel 1/8 inch Shank Cut-off Wheel Holder
- 10 piece 2mm screw mandrel set.
- They are used to hold cutoff wheel discs.
- 1/8 (3.175mm) shank size for Dremel and other Rotary Tools.
- US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI.
- See more on Amazon...
Brand: TEMO | Manufacturer: Golden Coulee
Dimensions: 0.25 x 3.00 x 3.00 Inches | Weight: 2.00 ounces
See On Amazon #3
TEMO 100 pc 1/2 Inch Sand Drum Grit 120 Medium with 2 pc 1/8 Inch Mandrel for Dremel Rotary Tools
Asin: B003BDY6CQ | Ean: 0723175192218 | UPC: 723175192218
Here Are Our Best Practices For Using Sand Drums. 1. Adjusting The Screw At The Top Of The Mandrel Will Loosen Or Tighten The Sand Drum. Make Sure The Sand Drum Is Held Tight To The Mandrel Before Use. 2. During Use, Periodically Power Down The Rotary Tool To Check The Sand Drum. Ensure That There Is Sufficient Grit Remaining On The Band Before Continuing..
Us-Based Customer Service: Available By Chat, Email, Phone, Or Visit Us At Our Customer Service Center In La Crosse, Wi..
3. Rotary Tools Can Operate At Very High Rpm. High Rpm With A Small Tool Such As A Sanding Drum Produces A Lot Of Friction And Heat Build Up. Ensure That Your Sand Drum And Mandrel Is Not Getting Too Hot. Consider Using Medium Speed And Alternating Mandrels As You Change Sand Drums Out To Reduce Heat Build Up.
4. Rotary Tools Are Power Tools. Always Consider Appropriate Eyewear And Other Ppe To Suit Your Task..
100 Piece 1/2" (12.7Mm) 120 Grit, 1/2" (12.7Mm) Diameter; 2 Piece 1/2" (12.7Mm) X 1/2" (12.7Mm) Rubber Mandrels; 1/8" (3.175Mm) Shank Size (For Dremel And Other Rotary Tools).
Features
- 100 PC 1/2" (12.7mm) sand drum with 2 Mandrel for dremel grit 120 medium
- 100 piece 1/2 (12.7mm) 120 Grit, 1/2 (12.7mm) Diameter; 2 piece 1/2 (12.7mm) X 1/2 (12.7mm) Rubber Mandrels; 1/8 (3.175mm) shank size (for Dremel and other Rotary Tools)
- Here are our best practices for using sand drums. 1. Adjusting the screw at the top of the mandrel will loosen or tighten the sand drum. Make sure the sand drum is held tight to the mandrel before use. 2. During use, periodically power down the rotary tool to check the sand drum. Ensure that there is sufficient grit remaining on the band before continuing.
- 3. Rotary tools can operate at very high RPM. High RPM with a small tool such as a sanding drum produces a lot of friction and heat build up. Ensure that your sand drum and mandrel is not getting too hot. Consider using medium speed and alternating mandrels as you change sand drums out to reduce heat build up.
4. Rotary tools are power tools. Always consider appropriate eyewear and other PPE to suit your task. - US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI.
- See more on Amazon...
Brand: TEMO | Manufacturer: Golden Coulee
Dimensions: 1.00 x 6.00 x 4.00 Inches | Weight: 0.19 Pounds
See On Amazon #4
TEMO 10 pc Impact Ready 5/16 Inch Magnetic Nutsetter Set 1/4 Inch Shank
Asin: B078X1CGZ3 | Ean: 0718117678851 | UPC: 718117678851
The Bit Has 1/4" (6.35Mm) Hex Shank. Total 1.5" Long..
Us-Based Customer Service: Available By Chat, Email, Phone, Or Visit Us At Our Customer Service Center In La Crosse, Wi..
Industrial Strength Magnet Maximizes Fastener Retention. Come With The Storage Box. | Forged With S2 Steel For Maximum Durability. Product Designed For Use In Impact Drivers And Wrenches.
Recessed Corners = Drives On Flats Which Minimzes Shavings.
Features
- Include 10 pc impact ready 5/16" (7.94mm) nutsetter.
- Recessed Corners = drives on flats which minimzes shavings
- The bit has 1/4 (6.35mm) hex shank. Total 1.5 long.
- Industrial strength magnet maximizes fastener retention. Come with the storage box. | Forged with S2 steel for maximum durability. Product designed for use in Impact Drivers and Wrenches
- US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI.
- See more on Amazon...
Brand: TEMO | Manufacturer: Golden Coulee
Dimensions: 0.50 x 3.00 x 3.00 Inches | Weight: 8.00 ounces
See On Amazon #5
TEMO 10 pc Durable Shiny 1/8 Inch Rotary Tool Collet Bit #480 for Dremel Rotary Tools
Asin: B006QYIKAQ | Ean: 5899405944843, 0723175193109 | UPC: 723175193109
For Dremel Except Discontinued Models 1, 2, And Series 1 Or Earlier Of Discontinued Models 260, 270 And 280. It Also Fit Many Other Compatible Rotary Tools..
Us-Based Customer Service: Available By Chat, Email, Phone, Or Visit Us At Our Customer Service Center In La Crosse, Wi..
Collets Are For Dremel 225 And Compatible Flex-Shaft Attachment. |.
Collets Are All 3/4" (19.05Mm) Long..
Features
- 10 pieces durable shiny Collet bits # 480 for 1/8 (3.175mm) diameter bits.
- Collets are all 3/4 (19.05mm) long.
- for Dremel except discontinued Models 1, 2, and Series 1 or earlier of discontinued Models 260, 270 and 280. It also fit many other compatible rotary tools.
- Collets are for Dremel 225 and compatible Flex-Shaft attachment. |
- US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI.
- See more on Amazon...
Brand: TEMO | Manufacturer: Golden Coulee
Dimensions: 0.50 x 3.00 x 3.00 inches | Weight: 1.00 ounces
See On Amazon #6
TEMO Torx Plus 50IP 2 Inch Long Bit Socket 1/2 Inch Square Drive Auto Repair Impact Ready Tool
Asin: B00GXW47TY | Ean: 0028672389841 | UPC: 028672389841
Sockets Are Made Of Satin Finished Chrome Vanadium Steel With 1/2" (12.7Mm) Square Drive.
Us-Based Customer Service: Available By Chat, Email, Phone, Or Visit Us At Our Customer Service Center In La Crosse, Wi..
Bits Are Impact Ready. Suitable For Both Hand Tool And Electric Tool | Industrial Quality For Auto Repair And Air Tools..
Bits Are Made Of S2 Steel For Maximum Durability..
Features
- Torx Plus 50IP 55mm 2" Long Bit socket
- Bits are made of S2 steel for maximum durability.
- Sockets are made of satin finished Chrome Vanadium steel with 1/2 (12.7mm) square drive
- Bits are impact ready. Suitable for both hand tool and electric tool | Industrial quality for auto repair and air tools.
- US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI.
- See more on Amazon...
Brand: TEMO | Manufacturer: Golden Coulee
Dimensions: 1.00 x 2.00 x 1.00 Inches | Weight: 3.00 ounces
See On Amazon #7
TEMO 50 pc T25 Torx 6 Point Impact Ready 1 Inch Long Screwdriver Insert Bits Hex Shank with Quick Release Slot
Asin: B078RVYSZW | Model: 50p | PartNumber: 50p | Ean: 0718117677489 | UPC: 718117677489
Made Of Industrial Quality S2 Steel For Maximum Durability..
Us-Based Customer Service: Available By Chat, Email, Phone, Or Visit Us At Our Customer Service Center In La Crosse, Wi..
Bits Are Impact Ready And Suitable For Both Hand Tools And Electric Tools. Includes Plastic Storage Case..
All Bits Are 1" (25.4Mm) Long With 1/4" (6.35Mm) Hex Shank And Quick Release Slot..
Features
- 50pc 1" T-25 Torx 6 Point Screwdriver Insert Bits Hex Shank with Quick Release Slot
- All bits are 1 (25.4mm) long with 1/4 (6.35mm) hex shank and quick release slot.
- Made of industrial quality S2 steel for maximum durability.
- Bits are impact ready and suitable for both hand tools and electric tools. Includes plastic storage case.
- US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI.
- See more on Amazon...
Brand: TEMO | Manufacturer: Golden Coulee
Dimensions: 1.00 x 5.00 x 3.00 Inches | Weight: 10.00 ounces
See On Amazon #8
TEMO Rotary Tool Hold Hanger Stand Clamp for Dremel Foredom and Other Rotary Tools
Asin: B00CUYR566 | Ean: 0798167871112, 7147905979543, 0723175192669 | UPC: 723175192669, 798167871112
Heavy-Duty Table-Bench Clamp Can Be Used Horizontal Or Vertical; 2-1/2 Inch Clamping Capacity.
Steel Rod And Hanger With Mirror Chrome Finish; Rugged Non-Conductive, Non-Scratch Abs Base..
Hanger Swivels 360-Degrees For Superior Versatility And Easy Access. Rugged Non-Conductive, Non-Scratch Abs Base..
3-Section Steel Rod Allows Customized Tool Height, Adjusts Easily From 10 - 22 Inches..
Features
- Super-handy rotary tool accessory - keeps tool handy, out of the way; essential for flex shaft use
- 3-section steel rod allows customized tool height, adjusts easily from 10 - 22 inches.
- Heavy-duty table-bench clamp can be used horizontal or vertical; 2-1/2 inch clamping capacity
- Hanger swivels 360-degrees for superior versatility and easy access. rugged non-conductive, non-scratch ABS base.
- Steel rod and hanger with mirror Chrome finish; rugged non-conductive, non-scratch ABS base.
- See more on Amazon...
Brand: TEMO | Manufacturer: Golden Coulee
Dimensions: 3.00 x 10.00 x 3.00 inches | Weight: 13.00 ounces
See On Amazon #9
TEMO Foot Pedal Control Switch for Dremel and other Rotary Tools
Asin: B079K87KK1 | Model: 3159 | PartNumber: 3159 | Ean: 0718117677786 | UPC: 718117677786
Max Speed: 5,000 To 15,000 Rpm. Provides Variable Speed To Connected Tools When Stepping On The Pedal With Varied Pressure. In Order To Operate With Variable Speed, Your Grinder Must Be Switched To High. Not Every Tool Is Capable Of Operating At Variable Speeds, Please Be Sure Your Tool Has This Ability..
Us-Based Customer Service: Available By Chat, Email, Phone, Or Visit Us At Our Customer Service Center In La Crosse, Wi..
Voltage: 110-250V, 50Hz/60Hz. The Cord Is 54" From The Pedal To The Power Source, And 15" From The Pedal To The Tool. Heavy Duty For Extended Use..
This Is The Same Switch That Comes In Our Grinder And Switch Set..
Features
- Foot Pedal Control Switch for Compatible Power Tools
- This is the same switch that comes in our Grinder and Switch Set.
- Max speed: 5,000 to 15,000 RPM. Provides variable speed to connected tools when stepping on the pedal with varied pressure. In order to operate with variable speed, your grinder must be switched to high. Not every tool is capable of operating at variable speeds, please be sure your tool has this ability.
- Voltage: 110-250V, 50Hz/60Hz. The cord is 54 from the pedal to the power source, and 15 from the pedal to the tool. Heavy duty for extended use.
- US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI.
- See more on Amazon...
Brand: TEMO | Manufacturer: Golden Coulee
Dimensions: 5.25 x 7.75 x 4.25 Inches | Weight: 0.02 Pounds
See On Amazon #10
TEMO 3/16 Inch Solid Carbide Broken Taps Drill Extractor
Asin: B079JC2S2C | Ean: 0718117677472 | UPC: 718117677472
Spade Point For Drilling Broken Taps And Bolts..
Us-Based Customer Service: Available By Chat, Email, Phone, Or Visit Us At Our Customer Service Center In La Crosse, Wi..
Solid Carbide Drill Bits Allow For Drilling Hard And Difficult Material. | Bright, Uncoated Surface..
Straight Flutes For Easy Control And Clean And Precise Drilling..
Features
- Self-centering point penetrates material without the need of a pilot hole.
- Straight flutes for easy control and clean and precise drilling.
- Spade point for drilling broken taps and bolts.
- Solid carbide drill bits allow for drilling hard and difficult material. | Bright, uncoated surface.
- US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI.
- See more on Amazon...
Brand: TEMO | Manufacturer: Golden Coulee
Dimensions: 0.50 x 3.75 x 0.50 inches | Weight: 1.00 ounces
See On Amazon #11
TEMO 10 pc Color Coded T10-T40 6 point Torx Impact Ready 2 Inch Long Screwdriver Insert Bit Set
Asin: B078RWMK11 | Model: T10 T40 | PartNumber: T10 T40 | Ean: 0718117677519 | UPC: 718117677519
Industrial Quality With Quick Release Slot.
Us-Based Customer Service: Available By Chat, Email, Phone, Or Visit Us At Our Customer Service Center In La Crosse, Wi..
Made Of S2 Steel For Maximum Durability. | Sizes Included: T10, T15(X2), T20(X2), T25(X2), T30(X2), T40.
All Bits Are 2"(50Mm) Long.
Features
- TEMO 14 pc Color Coded T10-T40 Torx Impact Ready 2" (50mm) Long Screwdriver Insert Bit Set
- All bits are 2(50mm) long
- Industrial quality with Quick Release Slot
- Made of S2 steel for maximum durability. | Sizes included: T10, T15(x2), T20(x2), T25(x2), T30(x2), T40
- US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI.
- See more on Amazon...
Brand: TEMO | Manufacturer: Golden Coulee
Dimensions: 0.50 x 5.00 x 3.50 Inches | Weight: 5.00 ounces
See On Amazon #12
TEMO IP50 3 Inch Long Black Impact Torx Plus 6 Point Socket Bit 1/2 Inch Square Drive Auto Repair Tool
Asin: B00K42XN4E | Model: 1385 | PartNumber: 1385 | Ean: 7439145016059, 0028672389179 | UPC: 028672389179
1/2" (12.7Mm) Sqaure Drive With Drive Release Holes..
Us-Based Customer Service: Available By Chat, Email, Phone, Or Visit Us At Our Customer Service Center In La Crosse, Wi..
Drop Forged Black Chrome Moly Steel (Cr-Mo). | Industrial Grade Quality. Suitable For Air Tools And Electric Tools..
The Socket Bits Are 3-1/8" (80Mm) Long..
Features
- Impact Torx Plus 6 point Socket Bit IP-50
- The socket bits are 3-1/8 (80mm) long.
- 1/2 (12.7mm) Sqaure Drive with drive release holes.
- Drop forged black chrome moly steel (CR-MO). | Industrial grade quality. Suitable for air tools and electric tools.
- US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI.
- See more on Amazon...
Brand: TEMO | Manufacturer: Golden Coulee
Dimensions: 1.00 x 3.00 x 1.00 inches | Weight: 0.11 pounds
See On Amazon #13
TEMO 10 pc 1/2 Inch Power Socket Extension Adapter Bit Set for Impact Driver
Asin: B078RW5W7Q | Ean: 0718117677274 | UPC: 718117677274
1/2" Head To 1/4" Shank Socket Extender And Adapter.
Us-Based Customer Service: Available By Chat, Email, Phone, Or Visit Us At Our Customer Service Center In La Crosse, Wi..
Usable In Any 1/4" Quick Change/Quick Chuck System | Spring Loaded Stainless Steel Ball To Hold Socket In Place.
Chrome Vanadium Steel For Heavy Duty Impact Drill/Driver Use.
Features
- 10pc 1/2" Power Socket Extension Adapter Bit Set for Impact Driver
- Chrome Vanadium steel for heavy duty impact drill/driver use
- 1/2 head to 1/4 shank socket extender and Adapter
- Usable in any 1/4 quick change/quick chuck system | Spring loaded stainless steel ball to hold socket in place
- US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI.
- See more on Amazon...
Brand: TEMO | Manufacturer: Golden Coulee
Dimensions: 0.50 x 5.00 x 4.00 inches | Weight: 17.00 ounces
See On Amazon #14
TEMO 2 pc 10-24 Combination Drill and Tap Multi Use Deburr Countersink Hex Bit
Asin: B079K7CZF8 | Ean: 0718117677557 | UPC: 718117677557
Drill, Tap And Deburr In One Operation. Tapered Tap Design Prevents Thread Damage From Over-Drilling..
Us-Based Customer Service: Available By Chat, Email, Phone, Or Visit Us At Our Customer Service Center In La Crosse, Wi..
One Piece Construction Guarantees Proper Drill For Tap Size. | 135 Self-Centering Split Point Tip. 10 Gauge (3.5Mm) Capacity. Usage Suggestions: Use Of Cutting Coil Recommended. Clean Tap Of Metal Chips To Extend Life. Reverse Drill To Back Out After Completing Tap..
Made Of High Speed M2 Steel. For Use With: Steel, Copper, Brass, Aluminum. Drill, Tap And Deburr In One Operation..
Features
- 2 pc 10-24 Combination Drill and Tap Multi Use Deburr Countersink Hex Bit
- Made of high speed M2 steel. For use with: steel, copper, brass, aluminum. drill, tap and deburr in one operation.
- Drill, tap and deburr in one operation. Tapered tap design prevents thread damage from over-drilling.
- One piece construction guarantees proper drill for tap size. | 135 self-centering split point tip. 10 gauge (3.5mm) capacity. Usage suggestions: use of cutting coil recommended. clean tap of metal chips to extend life. reverse drill to back out after completing tap.
- US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI.
- See more on Amazon...
Brand: TEMO | Manufacturer: Golden Coulee
Dimensions: 0.25 x 3.50 x 4.00 inches | Weight: 0.06 pounds
See On Amazon #15
TEMO Carbide Downcut Inlay Router Bit 1/32 Inch Diameter
Asin: B079JTJNRM | Model: 3145 | PartNumber: 3145 | Ean: 0718117677632 | UPC: 718117677632
Comes In Convenient Case With Compartment For Each Bit..
Us-Based Customer Service: Available By Chat, Email, Phone, Or Visit Us At Our Customer Service Center In La Crosse, Wi..
Carbide Router Bit Remain Sharp And Give A Superior Cut On Wood. | Spiral Bits Give Very Clean Cuts..
1.5" Length. 1/8" Shank Diameter..
Features
- Carbide Downcut Inlay Router Bit 1/32" dia.
- 1.5 length. 1/8 shank diameter.
- Comes in convenient case with compartment for each bit.
- Carbide router bit remain sharp and give a superior cut on wood. | Spiral bits give very clean cuts.
- US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI.
- See more on Amazon...
Brand: TEMO | Manufacturer: Golden Coulee
Dimensions: 0.25 x 3.50 x 3.00 inches | Weight: 2.00 ounces
See On Amazon #16
TEMO 50 pc 1/4 Inch Flat Impact Ready 1 Inch Length Slotted Screwdriver Insert Bit Hex Shank with Quick Release Slot
Asin: B00GXW3K4M | Ean: 0028672389544 | UPC: 028672389544
Industrial Quality With Quick Release Slot.
Us-Based Customer Service: Available By Chat, Email, Phone, Or Visit Us At Our Customer Service Center In La Crosse, Wi..
Made Of S2 Steel For Maximum Durability. | Bits Are Impact Ready. Suitable For Both Hand Tool And Electric Tool.
All Bits Are 1" (25.4Mm) Long With 1/4" (6.35Mm) Shank.
Features
- 50 pc Flat Slotted 1/4" (6.35mm) Screwdriver Insert Bits in a storage box.
- All bits are 1 (25.4mm) Long with 1/4 (6.35mm) Shank
- Industrial quality with quick release slot
- Made of S2 steel for maximum durability. | Bits are impact ready. Suitable for both hand tool and electric tool
- US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI.
- See more on Amazon...
Brand: TEMO | Manufacturer: Golden Coulee
Dimensions: 0.50 x 3.00 x 2.00 inches | Weight: 10.00 ounces
See On Amazon #17
TEMO 50pc PH3 Impact Ready Phillips 1 Inch Screwdriver Insert Bits Hex Shank
Asin: B07BMC9QV4 | Ean: 0718117677892 | UPC: 718117677892
Bits Are Impact Ready. Suitable For Both Hand Tool And Electric Tool.
Us-Based Customer Service: Available By Chat, Email, Phone, Or Visit Us At Our Customer Service Center In La Crosse, Wi..
Bits Come In Heavy Duty Storage Container. | Bits Are Impact Ready. Suitable For Both Hand Tool And Electric Tool.
Made Of S2 Steel For Maximum Durability..
Features
- 50 pc PH3 Phillips 1 Inch (25mm) Screwdriver Insert Bits
- Made of S2 steel for maximum durability.
- Bits are impact ready. Suitable for both hand tool and electric tool
- Bits come in heavy duty storage container. | Bits are impact ready. Suitable for both hand tool and electric tool
- US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI.
- See more on Amazon...
Brand: TEMO | Manufacturer: Golden Coulee
Dimensions: 0.50 x 4.75 x 3.50 inches | Weight: 10.00 ounces
See On Amazon #18
TEMO 10 pc 1/2 Inch Rubber Mandrel Sand Drum Holder 1/8 Inch Shank for Dremel Rotary Tools
Asin: B00C050UKI | Ean: 0723175192263 | UPC: 723175192263
Here Are Our Best Practices For Using Sand Drums. 1. Adjusting The Screw At The Top Of The Mandrel Will Loosen Or Tighten The Sand Drum. Make Sure The Sand Drum Is Held Tight To The Mandrel Before Use. 2. During Use, Periodically Power Down The Rotary Tool To Check The Sand Drum. Ensure That There Is Sufficient Grit Remaining On The Band Before Continuing..
Us-Based Customer Service: Available By Chat, Email, Phone, Or Visit Us At Our Customer Service Center In La Crosse, Wi..
3. Rotary Tools Can Operate At Very High Rpm. High Rpm With A Small Tool Such As A Sanding Drum Produces A Lot Of Friction And Heat Build Up. Ensure That Your Sand Drum And Mandrel Is Not Getting Too Hot. Consider Using Medium Speed And Alternating Mandrels As You Change Sand Drums Out To Reduce Heat Build Up.
4. Rotary Tools Are Power Tools. Always Consider Appropriate Eyewear And Other Ppe To Suit Your Task..
10 Piece 1/2" (12.7Mm) X 1/2" (12.7Mm) Rubber Mandrels; Used To Hold Sand Drum Or Sand Band; 1/8" (3.175Mm) Shank Size For Dremel And Other Rotary Tools.
Features
- 10 pc 1/2" (12.7mm) Rubber Mandrel 1/8 inch Shank Sand Drum Holder for Dremel Rotary tool
- 10 piece 1/2 (12.7mm) X 1/2 (12.7mm) Rubber Mandrels; used to hold sand drum or sand band; 1/8 (3.175mm) shank size for Dremel and other Rotary Tools
- Here are our best practices for using sand drums. 1. Adjusting the screw at the top of the mandrel will loosen or tighten the sand drum. Make sure the sand drum is held tight to the mandrel before use. 2. During use, periodically power down the rotary tool to check the sand drum. Ensure that there is sufficient grit remaining on the band before continuing.
- 3. Rotary tools can operate at very high RPM. High RPM with a small tool such as a sanding drum produces a lot of friction and heat build up. Ensure that your sand drum and mandrel is not getting too hot. Consider using medium speed and alternating mandrels as you change sand drums out to reduce heat build up.
4. Rotary tools are power tools. Always consider appropriate eyewear and other PPE to suit your task. - US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI.
- See more on Amazon...
Brand: TEMO | Manufacturer: Golden Coulee
Dimensions: 0.50 x 3.00 x 3.00 inches | Weight: 3.00 ounces
See On Amazon #19
TEMO T50 3 Inch Long Torx Star 6 Point Black Impact Bit Socket Auto Repair Tool 1/2 Inch Square Drive
Asin: B00GXXPKN0 | Model: 1346 | PartNumber: 1346 | Ean: 0028672390250 | UPC: 028672390250
1/2" (12.7Mm) Sqaure Drive With Drive Release Holes..
Us-Based Customer Service: Available By Chat, Email, Phone, Or Visit Us At Our Customer Service Center In La Crosse, Wi..
Drop Forged Black Chrome Moly Steel (Cr-Mo). | Industrial Grade Quality. Suitable For Air Tools And Electric Tools..
The Socket Bit Is 3-1/8" (80Mm) Long..
Features
- Impact Torx Star 6 point Socket Bit T50
- The socket bit is 3-1/8 (80mm) long.
- 1/2 (12.7mm) Sqaure Drive with drive release holes.
- Drop forged black chrome moly steel (CR-MO). | Industrial grade quality. Suitable for air tools and electric tools.
- US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI.
- See more on Amazon...
Brand: TEMO | Manufacturer: Golden Coulee
Dimensions: 1.00 x 3.00 x 1.00 inches | Weight: 4.00 ounces
See On Amazon #20
TEMO 100 pc 1/2 Inch Sand Drum Grit 240 Fine with 2 pc 1/8 Inch Mandrel for Dremel Rotary Tools
Asin: B00KUIVRHW | Model: 1500 | PartNumber: 1500 | Ean: 0723175193321 | UPC: 723175193321
Here Are Our Best Practices For Using Sand Drums. 1. Adjusting The Screw At The Top Of The Mandrel Will Loosen Or Tighten The Sand Drum. Make Sure The Sand Drum Is Held Tight To The Mandrel Before Use. 2. During Use, Periodically Power Down The Rotary Tool To Check The Sand Drum. Ensure That There Is Sufficient Grit Remaining On The Band Before Continuing..
Us-Based Customer Service: Available By Chat, Email, Phone, Or Visit Us At Our Customer Service Center In La Crosse, Wi..
3. Rotary Tools Can Operate At Very High Rpm. High Rpm With A Small Tool Such As A Sanding Drum Produces A Lot Of Friction And Heat Build Up. Ensure That Your Sand Drum And Mandrel Is Not Getting Too Hot. Consider Using Medium Speed And Alternating Mandrels As You Change Sand Drums Out To Reduce Heat Build Up.
4. Rotary Tools Are Power Tools. Always Consider Appropriate Eyewear And Other Ppe To Suit Your Task..
100 Piece 1/2" (12.7Mm) 240 Grit, 1/2" (12.7Mm) Diameter; 2 Piece 1/2" (12.7Mm) X 1/2" (12.7Mm) Rubber Mandrels; 1/8" (3.175Mm) Shank Size (For Dremel And Other Rotary Tools)..
Features
- 100 PC 1/2" (12.7mm) sand drum with 2 Mandrel for dremel grit 240 fine
- 100 piece 1/2 (12.7mm) 240 Grit, 1/2 (12.7mm) Diameter; 2 piece 1/2 (12.7mm) X 1/2 (12.7mm) Rubber Mandrels; 1/8 (3.175mm) shank size (for Dremel and other Rotary Tools).
- Here are our best practices for using sand drums. 1. Adjusting the screw at the top of the mandrel will loosen or tighten the sand drum. Make sure the sand drum is held tight to the mandrel before use. 2. During use, periodically power down the rotary tool to check the sand drum. Ensure that there is sufficient grit remaining on the band before continuing.
- 3. Rotary tools can operate at very high RPM. High RPM with a small tool such as a sanding drum produces a lot of friction and heat build up. Ensure that your sand drum and mandrel is not getting too hot. Consider using medium speed and alternating mandrels as you change sand drums out to reduce heat build up.
4. Rotary tools are power tools. Always consider appropriate eyewear and other PPE to suit your task. - US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI.
- See more on Amazon...
Brand: TEMO | Manufacturer: Golden Coulee
Dimensions: 1.00 x 6.00 x 4.00 Inches | Weight: 3.00 ounces
See On Amazon #21
TEMO 42 Inch (1 Meter) Flexible Flex Shaft Polishing Chuck for Dremel Rotary Grinder Tools
Asin: B07WKHD6LD | Model: 3410 | PartNumber: 3410 | Ean: 0718117680434 | UPC: 718117680434
Versatility: Rotary Tools Are Incredibly Versatile And This Accessory Provides Even More Functionality. Plus, The Flexi Rubber, Non-Slip Shaft Lets You Take Further Control Over Your Grinder. Bit Installation Instructions: 1) Insert The L-Bar Included Into The Hole On The Collet Side Of The Shaft. 2) Unscrew The Shaft Collet Nut. 3) Insert Bit Into The Shaft Collet. 4) Tighten Shaft Collet Nut. 5) Remove The L-Bar..
This Is A Temo Flex Shaft, And Although It Should Be Compatible With Most Common Types Of Rotary Tool, It May Not Be Compatible With All. Please Be Sure The Pictured Components Are Sufficient Enough To Connect It To Your Grinder. If You Are Having Difficulty Connecting It, You May Need Driver Nuts Or Other Extra Components..
Shaft Installation: As Shown In Attached Picture: 1) Remove Rotary Tool Collet Nut, And Rotary Tool Top Cap. 2) Slide Collet Nut Onto Shaft Core. 3) Insert Shaft Core Into Collet. 4) Tighten Collet Nut. Make Sure The Shaft Core Is Tightly Secured In The Tool. 5) Screw Shaft Connector Onto The Rotary Tool. This Will Ensure The Shaft Core Pushes Back Into The Shaft..
Compatibility: This 42” Grinder Attachment Fits The Majority Of Rotary Tools. Connection Is For Heads With A 3/4" (19.05Mm) Thread. For Dremel Models 100, 200, 300, 3000, 4000, 7300, 7700; Foredom, Toolshop, Performax, Milwaukee M12, Etc. If You're A Diy-Er, Hobbyist Or Craft Worker, Turn Your Rotary Tool Into A Grinder With This Flexible Shaft Attachment..
Features
- 42" Rotary Grinder Tool Flexible Flex Shaft for Dremel and Compatible Rotary Tools
- COMPATIBILITY: This 42 grinder attachment fits the majority of rotary tools. Connection is for heads with a 3/4 (19.05mm) thread. For Dremel models 100, 200, 300, 3000, 4000, 7300, 7700; Foredom, ToolShop, Performax, Milwaukee M12, etc. If you're a DIY-er, hobbyist or craft worker, turn your rotary tool into a grinder with this flexible shaft attachment.
- VERSATILITY: Rotary tools are incredibly versatile and this accessory provides even more functionality. Plus, the flexi rubber, non-slip shaft lets you take further control over your grinder. Bit installation instructions: 1) Insert the L-bar included into the hole on the collet side of the shaft. 2) Unscrew the shaft collet nut. 3) Insert bit into the shaft collet. 4) Tighten shaft collet nut. 5) Remove the L-bar.
- SHAFT INSTALLATION: As shown in attached picture: 1) Remove rotary tool collet nut, and rotary tool top cap. 2) Slide collet nut onto shaft core. 3) Insert shaft core into collet. 4) Tighten collet nut. Make sure the shaft core is tightly secured in the tool. 5) Screw shaft connector onto the rotary tool. This will ensure the shaft core pushes back into the shaft.
- This is a TEMO Flex Shaft, and although it should be compatible with most common types of rotary tool, it may not be compatible with all. Please be sure the pictured components are sufficient enough to connect it to your grinder. If you are having difficulty connecting it, you may need driver nuts or other extra components.
- See more on Amazon...
Brand: TEMO | Manufacturer: Golden Coulee
Dimensions: 1.00 x 4.00 x 4.00 inches | Weight: 9.00 ounces
See On Amazon #22
TEMO 42 Inch (1 Meter) Flexible Flex Shaft Polishing Chuck for Dremel and Compatible Rotary Grinder Tool
Asin: B004H45Q4U | Model: diy_product_B004H45Q4U | PartNumber: diy_product_B004H45Q4U | Ean: 0723175192652, 7131405426959 | UPC: 723175192652
Versatility: Rotary Tools Are Incredibly Versatile And This Accessory Provides Even More Functionality. Plus, The Flexi Rubber, Non-Slip Shaft Lets You Take Further Control Over Your Grinder. Bit Installation Instructions: 1) Insert The L-Bar Included Into The Hole On The Collet Side Of The Shaft. 2) Unscrew The Shaft Collet Nut. 3) Insert Bit Into The Shaft Collet. 4) Tighten Shaft Collet Nut. 5) Remove The L-Bar..
This Is A Temo Flex Shaft, And Although It Should Be Compatible With Most Common Types Of Rotary Tool, It May Not Be Compatible With All. Please Be Sure The Pictured Components Are Sufficient Enough To Connect It To Your Grinder. If You Are Having Difficulty Connecting It, You May Need Driver Nuts Or Other Extra Components..
Shaft Installation: As Shown In Attached Picture: 1) Remove Rotary Tool Collet Nut, And Rotary Tool Top Cap. 2) Slide Collet Nut Onto Shaft Core. 3) Insert Shaft Core Into Collet. 4) Tighten Collet Nut. Make Sure The Shaft Core Is Tightly Secured In The Tool. 5) Screw Shaft Connector Onto The Rotary Tool. This Will Ensure The Shaft Core Pushes Back Into The Shaft..
Compatibility: This 42” Grinder Attachment Fits The Majority Of Rotary Tools. Connection Is For Heads With A 3/4" (19.05Mm) Thread. For Dremel Models 100, 200, 300, 3000, 4000, 7300, 7700; Foredom, Toolshop, Performax, Milwaukee M12, Etc. If You're A Diy-Er, Hobbyist Or Craft Worker, Turn Your Rotary Tool Into A Grinder With This Flexible Shaft Attachment..
Features
- 42" Rotary Grinder Tool Flexible Flex Shaft for Dremel and Compatible Rotary Tools
- COMPATIBILITY: This 42 grinder attachment fits the majority of rotary tools. Connection is for heads with a 3/4 (19.05mm) thread. For Dremel models 100, 200, 300, 3000, 4000, 7300, 7700; Foredom, ToolShop, Performax, Milwaukee M12, etc. If you're a DIY-er, hobbyist or craft worker, turn your rotary tool into a grinder with this flexible shaft attachment.
- VERSATILITY: Rotary tools are incredibly versatile and this accessory provides even more functionality. Plus, the flexi rubber, non-slip shaft lets you take further control over your grinder. Bit installation instructions: 1) Insert the L-bar included into the hole on the collet side of the shaft. 2) Unscrew the shaft collet nut. 3) Insert bit into the shaft collet. 4) Tighten shaft collet nut. 5) Remove the L-bar.
- SHAFT INSTALLATION: As shown in attached picture: 1) Remove rotary tool collet nut, and rotary tool top cap. 2) Slide collet nut onto shaft core. 3) Insert shaft core into collet. 4) Tighten collet nut. Make sure the shaft core is tightly secured in the tool. 5) Screw shaft connector onto the rotary tool. This will ensure the shaft core pushes back into the shaft.
- This is a TEMO Flex Shaft, and although it should be compatible with most common types of rotary tool, it may not be compatible with all. Please be sure the pictured components are sufficient enough to connect it to your grinder. If you are having difficulty connecting it, you may need driver nuts or other extra components.
- See more on Amazon...
Brand: TEMO | Manufacturer: Golden Coulee
Dimensions: 1.00 x 4.00 x 4.00 inches | Weight: 0.44 pounds
See On Amazon #23
TEMO 100 pc 1/4 Inch Sand Drum Grit 60 Coarse with 2 pc 1/8 Inch Mandrel for Dremel Rotary Tools
Asin: B00C050SVO | Model: 3011 | PartNumber: 3011 | UPC: 723175192225
Here Are Our Best Practices For Using Sand Drums. 1. Adjusting The Screw At The Top Of The Mandrel Will Loosen Or Tighten The Sand Drum. Make Sure The Sand Drum Is Held Tight To The Mandrel Before Use. 2. During Use, Periodically Power Down The Rotary Tool To Check The Sand Drum. Ensure That There Is Sufficient Grit Remaining On The Band Before Continuing..
Us-Based Customer Service: Available By Chat, Email, Phone, Or Visit Us At Our Customer Service Center In La Crosse, Wi..
3. Rotary Tools Can Operate At Very High Rpm. High Rpm With A Small Tool Such As A Sanding Drum Produces A Lot Of Friction And Heat Build Up. Ensure That Your Sand Drum And Mandrel Is Not Getting Too Hot. Consider Using Medium Speed And Alternating Mandrels As You Change Sand Drums Out To Reduce Heat Build Up.
4. Rotary Tools Are Power Tools. Always Consider Appropriate Eyewear And Other Ppe To Suit Your Task..
100 Piece 1/4" (6.35Mm) 60 Grit, 1/4" (6.35Mm) Diameter; 2 Piece 1/4" (6.35Mm) X 1/2" (12.7Mm) Rubber Mandrels; 1/8" (3.175Mm) Shank Size (For Dremel And Other Rotary Tools). The Sand Drum Diameter Is The Inner Diameter Excluding The Sand Paper Thickness..
Features
- 100 PC 1/4" (6.35mm) sand drum with 2 Mandrel for dremel grit 60 coarse
- 100 piece 1/4 (6.35mm) 60 Grit, 1/4 (6.35mm) Diameter; 2 piece 1/4 (6.35mm) X 1/2 (12.7mm) Rubber Mandrels; 1/8 (3.175mm) shank size (for Dremel and other Rotary Tools). The sand drum diameter is the inner diameter excluding the sand paper thickness.
- Here are our best practices for using sand drums. 1. Adjusting the screw at the top of the mandrel will loosen or tighten the sand drum. Make sure the sand drum is held tight to the mandrel before use. 2. During use, periodically power down the rotary tool to check the sand drum. Ensure that there is sufficient grit remaining on the band before continuing.
- 3. Rotary tools can operate at very high RPM. High RPM with a small tool such as a sanding drum produces a lot of friction and heat build up. Ensure that your sand drum and mandrel is not getting too hot. Consider using medium speed and alternating mandrels as you change sand drums out to reduce heat build up.
4. Rotary tools are power tools. Always consider appropriate eyewear and other PPE to suit your task. - US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI.
- See more on Amazon...
Brand: TEMO | Manufacturer: Golden Coulee
Dimensions: 1.00 x 6.00 x 4.00 Inches | Weight: 2.00 ounces
See On Amazon #24
TEMO 100 pc 1/4 Inch Sand Drum Grit 240 Fine with 2 pc 1/8 Inch Mandrel for Dremel Rotary Tools
Asin: B00C050TWC | Model: 3013 | PartNumber: 3013 | Ean: 0723175192249 | UPC: 723175192249
Here Are Our Best Practices For Using Sand Drums. 1. Adjusting The Screw At The Top Of The Mandrel Will Loosen Or Tighten The Sand Drum. Make Sure The Sand Drum Is Held Tight To The Mandrel Before Use. 2. During Use, Periodically Power Down The Rotary Tool To Check The Sand Drum. Ensure That There Is Sufficient Grit Remaining On The Band Before Continuing..
Us-Based Customer Service: Available By Chat, Email, Phone, Or Visit Us At Our Customer Service Center In La Crosse, Wi..
3. Rotary Tools Can Operate At Very High Rpm. High Rpm With A Small Tool Such As A Sanding Drum Produces A Lot Of Friction And Heat Build Up. Ensure That Your Sand Drum And Mandrel Is Not Getting Too Hot. Consider Using Medium Speed And Alternating Mandrels As You Change Sand Drums Out To Reduce Heat Build Up.
4. Rotary Tools Are Power Tools. Always Consider Appropriate Eyewear And Other Ppe To Suit Your Task..
100 Piece 1/4" (6.35Mm) 240 Grit, 1/4" (6.35Mm) Diameter; 2 Piece 1/4" (6.35Mm) X 1/2" (12.7Mm) Rubber Mandrels; 1/8" (3.175Mm) Shank Size (For Dremel And Other Rotary Tools). The Sand Drum Diameter Is The Inner Diameter Excluding The Sand Paper Thickness..
Features
- 100 PC 1/4" (6.35mm) sand drum with 2 Mandrel for dremel grit 240 fine
- 100 piece 1/4 (6.35mm) 240 Grit, 1/4 (6.35mm) Diameter; 2 piece 1/4 (6.35mm) X 1/2 (12.7mm) Rubber Mandrels; 1/8 (3.175mm) shank size (for Dremel and other Rotary Tools). The sand drum diameter is the inner diameter excluding the sand paper thickness.
- Here are our best practices for using sand drums. 1. Adjusting the screw at the top of the mandrel will loosen or tighten the sand drum. Make sure the sand drum is held tight to the mandrel before use. 2. During use, periodically power down the rotary tool to check the sand drum. Ensure that there is sufficient grit remaining on the band before continuing.
- 3. Rotary tools can operate at very high RPM. High RPM with a small tool such as a sanding drum produces a lot of friction and heat build up. Ensure that your sand drum and mandrel is not getting too hot. Consider using medium speed and alternating mandrels as you change sand drums out to reduce heat build up.
4. Rotary tools are power tools. Always consider appropriate eyewear and other PPE to suit your task. - US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI.
- See more on Amazon...
Brand: TEMO | Manufacturer: Golden Coulee
Dimensions: 0.50 x 6.00 x 4.00 inches | Weight: 2.00 ounces
See On Amazon #25
TEMO 10 pc Carbon Steel 3/4 Inch Flat Wire Brush #428 1/8 Inch Shank for Dremel and Other Rotary Tools
Asin: B00H7Q9OMU | Ean: 0723175193468 | UPC: 723175193468
Overall Length Is 43Mm (1 3/4 Inch); Shank Diameter : 3.17Mm (1/8 Inch).
Us-Based Customer Service: Available By Chat, Email, Phone, Or Visit Us At Our Customer Service Center In La Crosse, Wi..
Wheel Diameter : 19Mm (3/4 Inch); Wheel Thickness : 1Mm To 1.5Mm | Suitable For Removing Rust And Oxidation..
They Will Fit Your Hand Drill, Drill Press & For Dremel And Foredom Tool With A 1/8" (3.175Mm) Collet..
Features
- New 10 pieces 428 carbon steel flat wire BRUSHES
- They will fit your hand drill, drill press & for Dremel and Foredom tool with a 1/8 (3.175mm) collet.
- Overall length is 43mm (1 3/4 inch); Shank diameter : 3.17mm (1/8 inch)
- Wheel diameter : 19mm (3/4 inch); Wheel thickness : 1mm to 1.5mm | Suitable for removing rust and oxidation.
- US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI.
- See more on Amazon...
Brand: TEMO | Manufacturer: Golden Coulee
Dimensions: 0.50 x 3.00 x 3.00 inches | Weight: 2.00 ounces
See On Amazon #26
TEMO 1/4 Inch Solid Carbide Fiberglass Router Bit
Asin: B07BFCJPDP | Model: 3117 | PartNumber: 3117 | Ean: 0718117677366 | UPC: 718117677366
135 Degree Cutting Point.
Us-Based Customer Service: Available By Chat, Email, Phone, Or Visit Us At Our Customer Service Center In La Crosse, Wi..
2" Total Length, 3/4" Long Cutting Head | 1/4" Diameter Shank.
Excellent For Cutting Through Fiberglass, Carbon Fiber, Fiber Cement, Drywall, Resin, Frp, Grp, And Other Composite Materials.
Features
- Solid Carbide Fiberglass Router Bit
- Excellent for cutting through fiberglass, carbon fiber, fiber cement, drywall, resin, FRP, GRP, and other composite materials
- 135 degree cutting point
- 2 total length, 3/4 long cutting head | 1/4 diameter shank
- US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI.
- See more on Amazon...
Brand: TEMO | Manufacturer: Golden Coulee
Dimensions: 0.25 x 3.75 x 0.25 inches | Weight: 1.00 ounces
See On Amazon #27
TEMO SD-3L6 Double Cut Carbide Rotary Burr File, 3/8 Inch Head Ball, 1/4 Inch Diameter 6 Inch Long Shank
Asin: B0080LE2XW | Ean: 0723175191686 | UPC: 723175191686
Burrs Are Made With Tungsten Carbide And Are Suitable For Deburring And Polishing Cast Iron, Cast Steel, Carbon Steel, Alloy Steel, Stainless Steel And Other Materials Up To Hrc65 Hardness..
Us-Based Customer Service: Available By Chat, Email, Phone, Or Visit Us At Our Customer Service Center In La Crosse, Wi..
Packaged In A Clear Plastic Tube. 6" Shank Length, 6.5" Total Length..
1/4" (6.35Mm) Shank And 3/8" (9.52Mm) Head Diameter.
Features
- Double Cut SD-3L6 Ball Head Shape
- 1/4 (6.35mm) shank and 3/8 (9.52mm) head diameter
- Burrs are made with tungsten carbide and are suitable for deburring and polishing cast iron, cast steel, carbon steel, alloy steel, stainless steel and other materials up to HRC65 hardness.
- Packaged in a clear plastic tube. 6 shank length, 6.5 total length.
- US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI.
- See more on Amazon...
Brand: TEMO | Manufacturer: Golden Coulee
Dimensions: 0.50 x 7.00 x 0.50 inches | Weight: 3.00 ounces
See On Amazon #28
TEMO 30 pcs Fine Diamond Coated Burrs Glass Drill Bit Grit 300 with 1/8 Inch Shank for Dremel and Other Rotary Tools
Asin: B004H40AQY | Ean: 0723175192881 | UPC: 723175192881
Included 1/16" (1.59Mm) Diamond Drill Bits In A Fine Grit, For Drilling Glass, Shells, Tile And Stone..
Us-Based Customer Service: Available By Chat, Email, Phone, Or Visit Us At Our Customer Service Center In La Crosse, Wi..
Overall Length Is 40Mm To 50Mm (1 5/8 Inch To 2 Inch) | They Will Fit Your Hand Drill, Drill Press & For Dremel And Foredom Tool With A 1/8" Collet. Included 1/16" (1.59Mm) Diamond Drill Bits In A Fine Grit, For Drilling Glass, Shells, Tile And Stone. Overall Length Is 40Mm To 50Mm (1 5/8 Inch To 2 Inch). Shank Diameter : 3.17Mm (1/8 Inch). Premium Type Diamond Coated In Grit 300 (Fine). Suitable For Glass, Marble, Rock Or Jewelry..
They Will Fit Your Hand Drill, Drill Press & For Dremel And Foredom Tool With A 1/8" Collet. Shank Diameter : 3.17Mm (1/8 Inch).
Features
- New one box set of 30 pieces diamond coated burrs with pointed heads in box set.
- They will fit your hand drill, drill press & for Dremel and Foredom tool with a 1/8 collet. Shank diameter : 3.17mm (1/8 inch)
- included 1/16 (1.59mm) diamond drill bits in a fine grit, for drilling glass, shells, tile and stone.
- Overall length is 40mm to 50mm (1 5/8 inch to 2 inch) | They will fit your hand drill, drill press & for Dremel and Foredom tool with a 1/8 collet. Included 1/16 (1.59mm) diamond drill bits in a fine grit, for drilling glass, shells, tile and stone. Overall length is 40mm to 50mm (1 5/8 inch to 2 inch). Shank diameter : 3.17mm (1/8 inch). Premium type diamond coated in GRIT 300 (fine). Suitable for glass, marble, rock or jewelry.
- US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI.
- See more on Amazon...
Brand: TEMO | Manufacturer: Golden Coulee
Dimensions: 0.50 x 6.00 x 3.00 inches | Weight: 5.00 ounces
See On Amazon #29
TEMO #55 Anti-Theft Wheel Lug Nut Removal Socket Key 3437 for Porsche
Asin: B0842C14Q6 | Model: TEMO 1 | PartNumber: TEMO 1 | Ean: 0718117681141 | UPC: 718117681141
To Determine Which Key You Need, Visually Match The Key Pattern To The Locking Lug Nuts On Your Vehicle. Key Compatibility Is Not Based On The Make, Model Or Year Of The Vehicle. When Removing Your Lug Nuts, It Is Best To Evenly Loosen Each Nut On The Wheel As Opposed To Completely Removing One At A Time, This Helps Reduce Pressure On The Remaining Nuts..
Us-Based Customer Service: Available By Chat, Email, Phone, Or Visit Us At Our Customer Service Center In La Crosse, Wi..
Line Up Socket With Nut Tightly; Turn Counter-Clockwise To Loosen Nuts. Not Intended For Use With Impact Wrench..
One Piece Anti-Theft Lugnut Key For Selected Porsche Vehicles..
Features
- TEMO #55 Anti-Theft Wheel Lug Nut Removal Socket Key 3437 for Porsche
- One piece anti-theft lugnut key for selected Porsche vehicles.
- To determine which key you need, visually match the key pattern to the locking lug nuts on your vehicle. Key compatibility is not based on the make, model or year of the vehicle. When removing your lug nuts, it is best to evenly loosen each nut on the wheel as opposed to completely removing one at a time, this helps reduce pressure on the remaining nuts.
- Line up socket with nut tightly; turn counter-clockwise to loosen nuts. Not intended for use with impact wrench.
- US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI.
- See more on Amazon...
Brand: TEMO | Manufacturer: Golden Coulee
Dimensions: 1.00 x 1.50 x 1.00 inches | Weight: 4.00 ounces
See On Amazon #30
TEMO #814 Anti-Theft Wheel Lug Nut Removal Socket Key 3436 for Audi
Asin: B0842CCCHK | Model: 3469 | PartNumber: 3469 | Ean: 0718117681028 | UPC: 718117681028
To Determine Which Key You Need, Visually Match The Key Pattern To The Locking Lug Nuts On Your Vehicle. Key Compatibility Is Not Based On The Make, Model Or Year Of The Vehicle. When Removing Your Lug Nuts, It Is Best To Evenly Loosen Each Nut On The Wheel As Opposed To Completely Removing One At A Time, This Helps Reduce Pressure On The Remaining Nuts..
Us-Based Customer Service: Available By Chat, Email, Phone, Or Visit Us At Our Customer Service Center In La Crosse, Wi..
Line Up Socket With Nut Tightly; Turn Counter-Clockwise To Loosen Nuts. Not Intended For Use With Impact Wrench..
One Piece Anti-Theft Lugnut Key For Selected Audi Vehicles. Interior Black Surface Is Made With Manganese Phosphate Coating..
Features
- TEMO #814 Anti-Theft Wheel Lug Nut Removal Socket Key 3436 for Audi
- One piece anti-theft lugnut key for selected Audi vehicles. Interior black surface is made with Manganese Phosphate Coating.
- To determine which key you need, visually match the key pattern to the locking lug nuts on your vehicle. Key compatibility is not based on the make, model or year of the vehicle. When removing your lug nuts, it is best to evenly loosen each nut on the wheel as opposed to completely removing one at a time, this helps reduce pressure on the remaining nuts.
- Line up socket with nut tightly; turn counter-clockwise to loosen nuts. Not intended for use with impact wrench.
- US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI.
- See more on Amazon...
Brand: TEMO | Manufacturer: Golden Coulee
Dimensions: 1.00 x 1.75 x 1.00 inches | Weight: 0.31 pounds
See On Amazon