Titan Distributors Inc. - Buying Guide

Bestselling from Titan Distributors Inc. on Amazon

1. Titan Attachments Green 3 Point Quick Hitch Adaptor to Category 1 Tractors, 3000 LB Lifting Capacity...
2. Titan Attachments 50-in Pallet Fork Frame Attachment, 4,000 LB Capacity, Receiver Hitch and 42-in Fo...
3. Titan 3" Wide Replacement Steel Flail Hammer Blade for Tractor Mowers 5 Pack
4. Titan Attachments 3 Point Fence Stretcher and Unroller Heavy Wire Fencing Fits Cat 1 Tractors, Quick...
5. Titan Attachments Heavy Duty Pallet Fork Frame and 48" Fork Blades with 2" Trailer Receiver Hitch Fi...
6. Titan Attachments 3.5" Wide Replacement Steel Flail Hammer Blade for Tractor Mower, Pack of 5
7. Titan Distributors Inc. Adapter to Convert Full Size Universal Quick Tach to Quick Hitch 3 Point Cat 1,2
8. Titan Attachments 21" Fork Length Clamp-On Debris Forks V2, Fits 60" Loader Buckets, Skid Steers, Ra...
9. Titan Attachments 3 Point Quick Hitch Adaption to Category 2 Tractors, 4000 LB Lifting Capacity, 32....
10. Titan Attachments 21" Fork Length Clamp-On Debris Forks V2, Fits 48" Loader Buckets, Skid Steers, Ra...

Features

• CATEGORY 1, 3-POINT HOOKUP: This adapter is designed to convert your Category 1, 3 Point hitch into a quick hitch. This allows you to easily connect your tractor to your 3 Point implements within minutes saving you time and labor.
• NO WELDING OR MODIFICATION NEEDED: This adapter comes ready to attach directly to your Tractor s 3 Point hitch without any modifications, bolting or welding required. Back your tractor right up to the back of the adapter, hook into the top link bar, and connect your lower lift pins. It is that easy!
• QUICK AND EASY CONNECTION: The spring-loaded lever locks the lower lift arms. The two sides of the pin hook with the limit function strengthen stability and improve security.
• DURABLE CONSTRUCTION: The quick hitch adapter is constructed with 3 x 3 tubular steel and reinforced with 9-Gauge steel gusset plates. The Titan Category 1, 3 Point Quick Hitch is powder-coated Green to protect against rust and corrosion.
• DIMENSIONS: Weighing 60 LB, this adapter is rated at 3,000 LB lifting capacity and is 30 wide, stands 23.5 high, and has a depth of 7.75. The lower lift pin hooks sit 27.5 center to center and are 1.5 wide.
• See more on Amazon...

Features

• DURABLE FRAME ATTACHMENT: With a capacity of 4,000-pounds, this Pallet Fork Frame Attachment handles most lifting and lightweight towing tasks without taxing your machine's power or lift capacity. Our pallet fork attachment is designed to fit 200, 300, 400, and 500 series John Deere loaders. It does not fit any loaders equipped with the Global/Euro style or universal Skid Steer style mount.
• REMOVABLE PALLET FORK BLADES AND SPEARS: For your convenience, the Carriage Bars and Hay Spear Sleeves are already installed. Easily remove the hay spears, allowing you to add class II pallet fork blades to the carriage bars. They will enable you to use the spears, forks, or both at the same time when desired. You can remove them all when only the receiver hitch is needed.
• DURABLE CONSTRUCTION: The frame and forks are constructed from durable, heavy-duty materials, perfect for lifting heavy loads. Additionally, the frame is powder-coated green for a longer-lasting finish. The top pin set fits D120, D160, D170, H120, H130, H140, 120R, 200X, 200CX, 220R, 300X, 300CX, 300E, 300R, 305, 320R, 400X, 400CX, 410, 419, 420, 440, 440R, and 460 series loaders. Bottom pin set fits 500, 510, 512, 520, 521, 540, 541, 542, and 553 series Ag loaders.
• DIMENSIONS: The 50-inch long pallet fork frame stands 29.5-inches tall, provides an adjustable fork width from 11.75 to 43-inches, and features a 2-inch trailer receiver hitch welded into the frame and two 42-inch Class 2 Pallet Fork Blades. The implement weighs 120-pounds.
• See more on Amazon...

Features

• UNIVERSAL DESIGN: Our H400 3" wide flail hammer can fit a wide variety of flail mowers and cutters. This particular model is designed to replace 3" wide hammers with a 1/2" bolt hole that have worn down or have become cracked or broken. You can also replace your Yshaped knife blades to be more effective.
• DIMENSIONS: The Titan Attachments 3 wide hammer blade will have a 1.5 wide bolt slot and a 1/2 bolt hole diameter and an overall length of 3.5. These are sold and shipped in packs of 5 allowing you to save on cost and provide additional blades if needed.
• HEAVY DUTY STEEL CONSTRUCTION: The forged steel hammer blade will weigh 1 LB and provide plenty of mass for cutting through high grass, brush, and fallen branches. This hammer style allows you to cut a variety of grass, brush, and branches that a Yshaped blade simply cannot.
• GREAT FOR CONSTRUCTION AND LANDSCAPING: This flail hammer blade style is known to easily cut through branches and provide more cutting power then typical Yshaped knife blades. That makes the hammer blade the most diverse blade found on flail mowers and can be used in most all mowing applications.
• See more on Amazon...

Features

• RUN FENCE LINES WITHOUT A CREW: The fence stretcher allows you to load, operate, and run fence lines without needing a crew of workers. Attach the fence to your first post and ride your tractor down your fence line while the spool unrolls. Once you reach the end, tighten the clamps and pull the fence tight.
• DESIGNED FOR CATEGORY 1, 3 POINT: The Fence Stretcher is designed to connect directly to a Category 1, 3 Point hitch commonly found on tractors such as Kubota, New Holland, Massey, and more. For your convenience, we have included the Cat 1 lower lift pins.
• QUICK HITCH COMPATIBLE: This 3 Point attachment is compatible with Category 1 Quick Hitch adapters, allowing you to connect to the fence stretcher quickly and easily. We have included the lower lift pins for your convenience.
• DURABLE CONSTRUCTION: The 3 Point Fence Stretcher comes standard with coated steel powder. This is to help prevent corrosion and rust to the frame from harsh weather so your fence stretcher performs year after year with little maintenance.
• DIMENSIONS: Weighing 200 LB (without the spool), the overall height of the fence stretcher is 78, with the pole measuring 75. The stretcher will accept spools up to 65 high. The overall depth of the attachment is 48.5.
• See more on Amazon...

Features

• Fits John Deere Loaders.
• 2 Trailer Hitch Receiver.
• Fits Conus 2 hay bale spears.
• Safely move hay bales with the added stability of a headache rack.
• Pair of 48 Class II pallet forks included.
• See more on Amazon...

Features

• UNIVERSAL DESIGN: The 3.5-inch-wide Flail Hammer can fit a wide variety of Flail Mowers and Cutters. This model is designed to replace 3.5-inch-wide hammers with a 5/8-inch bolt hole that has worn down or has become cracked or broken. You can also replace your Y-shaped knife blades to be more effective.
• GREAT FOR CONSTRUCTION AND LANDSCAPING: This Flail Hammer Blade style is known to easily cut through branches and provide more cutting power than typical Y-shaped knife blades. That makes the Hammer Blade the most diverse blade found on flail mowers and can be used in most all mowing applications.
• DURABLE CONSTRUCTION: The forged steel Hammer Blade individually weighs 1.5-pounds and provides plenty of mass for cutting through high grass, brush, and fallen branches. This hammer style allows you to cut a variety of grass, brush, and branches that a Y-shaped blade simply cannot.
• DIMENSIONS: The 3.5-inch-wide Flail Hammer features a 1.5-inch-wide bolt slot and a 5/8-inch bolt hole diameter and an overall length of 4.3-inches. These are sold and shipped in packs of 5 allowing you to save on cost and provide additional blades if needed.
• See more on Amazon...

Features

• HEAVY DUTY LIGHTWEIGHT DESIGN: The skid steer to 3 point quick hitch adapter weighs only 105 LB, yet is built to allow your full size skid steer to mount directly to the 3 point style implements. This adapter is built with 5/16 structural steel and reinforced with 3.25" x 3.25" tubular steel and will have a weight capacity of 3,000 LB.
• UNIVERSAL SKID STEER CONNECTION: Our superior design allows this adapter to fit your full size skid steer and convert it to quickly connect to category 1 and category 2 3 point attachments. This kind of versatility creates an opportunity for you to use it across various brands and types of attachments, such disc harrows, rippers, pallet forks, landscape rakes, cultivators and more.
• A MUST HAVE FOR LANDSCAPING AND CONSTRUCTION: Titan Attachments Low Profile Skid Steer to Quick Hitch Adapter now allows you to take advantage of your full size skid steers and tractor loaders, allowing them to use your tractors 3 point implements making it an invaluable piece of equipment.
• NO WELDING OR MODIFICATION NEEDED: This adapter comes ready to attach directly to your Skid Steer Loader without any modifications, bolting or welding required. Drive your skid steer or tractors front end loader right up to the back of the adapter, hook into the top and drop your pins. It is that easy!
• See more on Amazon...

Features

• DESIGNED FOR BUCKETS: The Clamp-On Debris Fork is designed to clamp directly onto your bucket s cutting edge. With the puck, it will slide onto buckets that are up to 1.5-inch-thick and 2-inches without the puck.
• GREAT FOR LANDSCAPING AND CONSTRUCTION: The possibilities are endless with this Clamp-On Debris Fork, which makes it ideal for landscaping and construction companies. Use it to clear debris such as fallen trees, branches, sticks, lumber and more, easily around your worksite.
• WON T HURT YOUR BUCKET: Single clamping models put all the down force onto a small area of your bucket which can cause it to bend and warp. The dual design spreads this load across a larger area preventing this from happening.
• DURABLE CONSTRUCTION: The Clamp-On Debris Fork Attachment features an additional reinforced frame. The grade 50 structural steel allows the 5 FT Debris Fork Attachment to have an evenly distributed load capacity of 4,560-pounds.
• DIMENSIONS: The 141-pound Clamp-On Debris Fork provides and overall width of 58-inches-wide. The perfect size to fits on a 60-inch bucket. There are five total forks that are 21-inches-long with a fork spacing of 9-inches. The overall depth is 31-inches.
• See more on Amazon...

Features

• CATEGORY 2, 3-POINT HOOKUP: This adapter is designed to convert your Category 2, 3 Point Hitch into a quick hitch. This allows you to easily connect your tractor to your 3 Point implements within minutes saving you time and labor.
• NO WELDING OR MODIFICATION NEEDED: This adapter comes ready to attach directly to your Tractor s 3 Point Hitch without any modifications, bolting or welding required. Back your tractor right up to the back of the adapter, hook into the top link bar, and connect your lower lift pins. It is that easy! Note, the top link pin is not included.
• QUICK AND EASY CONNECTION: The spring-loaded lever locks the lower lift arms. The two sides of the pin hook with the limit function strengthen stability and improve security.
• DURABLE CONSTRUCTION: The quick hitch adapter is constructed with 4 x 4-inch tubular steel and reinforced with 9-Gauge steel gusset plates. The Titan Category 2 Quick Hitch is powder-coated Black to protect against rust and corrosion.
• DIMENSIONS: Weighing 97 LB, this adapter is rated at 4,000 LB lifting capacity and is 36.25 wide, stands 22.75 high, and has a depth of 8.25. The lower lift pin hooks sit 32.75 center to center and are 1.5 wide.
• See more on Amazon...

Features

• DESIGNED FOR BUCKETS: The Clamp-On Debris Fork is designed to clamp directly onto your bucket s cutting edge. With the puck, it will slide onto buckets that are up to 1.5-inch-thick and 2-inches without the puck.
• GREAT FOR LANDSCAPING AND CONSTRUCTION: The possibilities are endless with this Clamp-On Debris Fork, which makes it ideal for landscaping and construction companies. Use it to clear debris such as fallen trees, branches, sticks, lumber and more, easily around your worksite.
• WON T HURT YOUR BUCKET: Single clamping models put all the down force onto a small area of your bucket which can cause it to bend and warp. The dual design spreads this load across a larger area preventing this from happening.
• DURABLE CONSTRUCTION: The Clamp-On Debris Fork Attachment features an additional reinforced frame. The grade 50 structural steel allows the 4 FT Debris Fork Attachment to have an evenly distributed load capacity of 2,500-pounds.
• DIMENSIONS: The 119-pound Clamp-On Debris Fork provides and overall width of 42-inches-wide. The perfect size to fits on a 48-inch bucket. There are five total forks that are 21-inches-long with a fork spacing of 9-inches. The overall depth is 31-inches.
• See more on Amazon...

Features

• 48" WORKING WIDTH: The disc bedder offers a working width of up to 48", allowing you to cover more ground efficiently in one go and construct larger raised garden beds. Its adjustable width feature also enables narrower configurations, perfect for creating higher raised beds with precision.
• TITAN QUICK HITCH COMPATIBLE: Our superior design allows this Category 1, 3 Point disc bedder to connect to quick hitches. With your quick hitch installed, back up to the garden disc bedder and easily attach this implement.
• ADJUSTABLE WIDTH, DEPTH, AND ANGLE: The Garden Disc Bedder provides adjustable disc blade working width, depth, and rotation, allowing you to tailor the creation of your raised garden bed to your specific needs.
• DURABLE CONSTRUCTION: The 4 FT Disc Bedder features a powder-coated Charcoal/Orange frame, ensuring long-lasting performance and a fresh appearance for years. Its blades come with sealed bearings, providing hassle-free maintenance for this 3 Point attachment.
• DIMENSIONS: The disc bedder has a 48 overall width with 16 diameter disc blades. Its frame is built from 3/8 thick steel square tubing. The vertical height ranges from 16 to 18 from the lower lift pins to the top link pin. It weighs 110 LB in total.
• See more on Amazon...

Features

• 49" Main Hay Spear with Nut 3,000 LB Capacity.
• A Pair of 17 Stabilizer Spears Included.
• Designed to install to frames with Conus 2 Hay Spear Sleeves. Sleeves Sold Separately.
• Main Conus 2 Spear is 49 long and weighs 23 LB
• Stabilizer Spears weigh 6 LB each.
• See more on Amazon...

Features

• UNIVERSAL SKID STEER CONNECTION: Our superior design allows this Skid Steer Skeleton Rock Bucket to fit with almost all skid steers, loaders, and tractors such as the Ford 8n, 9n, Kubota, BX, or Kioti tractors. This kind of connection is known as SSQA or Universal Skid Steer Style Quick Connect.
• SKELETON FRAME: The 5 FT Fine-Grade Rock Bucket is constructed using a 0.5-inch grade 50 structural steel. The sidewall thickness is 0.5-inches thick, providing plenty of support. At the top of this rock and debris bucket, we have added a 4 x 4-inch 9-gauge tubular steel support which adds to the structural integrity other rock buckets simply do not have.
• REPLACEABLE TEETH: This attachment features teeth that can be easily replaced. Fortunately, you do not need to replace the entire system because of a single worn tooth. Instead, you can order a tooth individually, or in a 3 or 5-pack.
• GREAT FOR LANDSCAPING: This Rock Bucket is designed to easily scoop and sift material and debris from dirt, mulch, rocks, debris, snow, and more. This makes this skid steer bucket ideal in any situation and an invaluable attachment for your tractor and skid steer.
• DIMENSIONS: This Skeleton Bucket weighs 650-pounds and provides overall dimensions of 60-inches wide by 51.5-inches deep and stands 20-inches high. The deep-well buckets inside dimensions are 59-inches wide by 38-inches deep and stands 19-inches high. The tines are spaced 3-inches apart with a thickness of 0.5-inches and the cutting edge is 0.75-inch thick.
• See more on Amazon...

Features

• HEAVY DUTY LIGHTWEIGHT DESIGN: The skid steer to toro adapter weighs only 195 LB, yet is built to allow your full size skid steer to mount directly to the toro dingo style implements. This adapter is built with 5/16 structural steel and reinforced with 2.5" x 2.5" tubular steel.
• UNIVERSAL SKID STEER CONNECTION: Our superior design allows this adapter to fit your full size skid steer and convert it to connect with almost all mini skid steers such as toro dingo, boxer, ditch witch and more. This kind of versatility creates an opportunity for you to use it across various brands and types of attachments, such as buckets, tree shears, pallet forks, hay spears frames and more.
• A MUST HAVE FOR LANDSCAPING AND CONSTRUCTION: Titan Attachments Low Profile Skid Steer to Toro Adapter now allows you to take advantage of your full size skid steers and allow them to be used with your toro, boxer, ditch witch or other mini skid steer implements making it an invaluable piece of equipment.
• NO WELDING OR MODIFICATION NEEDED: This adapter comes ready to attach directly to your Skid Steer Loader without any modifications, bolting or welding required. Drive skid steer right up to the back of the adapter, hook into the top and drop your pins. It is that easy!
• ABOUT TITAN: At Titan, we pride ourselves on our excelling communication capabilities. We are a company that is based in the USA and is always willing to answer any questions if you need to contact us. We're proud to offer a 1year warranty. If you're not 100% satisfied with your purchase, we provide a moneyback guarantee.
• See more on Amazon...

Features

• HEAVYDUTY DESIGN: The 60inch Bucket designed to fit John Deere is constructed using 0.1875in structural steel. The sidewall thickness is an impressive 0.5inch thick, providing plenty of support. At the top of this dirt and debris bucket, we have added a 2 x 4inch 9gauge tubular steel support which adds to the structural integrity other dirt buckets simply do not have.
• HOOK AND PIN CONNECTION: This dirt bucket fits John Deere tractors equipped with the hook and pin carrier. Top pin set fits H120, D120, 210, 200x, 200cx, 300cx, 300x, 305, 400x, 400cx, 410, 419, 420, 430, 440, and 460 series loaders. Bottom pin set fits 500, 510, 520, 521, 540, 541, and 542 series Ag loaders.
• A MUST HAVE FOR LANDSCAPING AND CONSTRUCTION: Titan Attachments Low Profile Dirt Bucket is designed to easily scoop and transport material such as dirt, mulch, rocks, debris, snow and more. Making this bucket ideal in any situation and an invaluable attachment for your tractor.
• PERFECT SIZE FOR ANY TASK: With the inside dimensions of 60inches wide, 26.5inches deep, and 20inches high, you can carry plenty of material which allows you to make fewer trips, saving time and money. The light weight design allows you to utilize your loaders lifting capacity and carry these larger loads.
• See more on Amazon...

Features

• EASILY TRANSPORT HAY BALES, TRAILERS, AND PALLETS: With this global frame attachment s all in one design, you can easily move big round hay bales by adding the hay spear and stabilizer spears. The 48 pallet forks allow you to move standard pallets, logs, and other debris. The built in 2 receiver makes moving trailers a breeze.
• MADE IN USA: The UA global style pallet fork frame and hay bale attachment is designed and built in the USA by United Attachments. It is built with the highest quality materials and workmanship to exceed your expectations.
• DESIGNED TO FIT JOHN DEERE GLOBAL TRACTORS: This heavy duty attachment is made to fit John Deere tractors equipped with the Euro Global style connection. This attachment does not fit loaders equipped with the Universal Quick Tach, Pin On or the John Deere style Hook and Pin.
• REMOVABLE PALLET FORK BLADES: For your convenience, the hay spears and the pallet fork blades are removable. This allows you to use only the spears, just the forks, or both at the same time when you desire. You can remove them all when you need to use just the receiver hitch as well.
• HEAVY DUTY FRAME: With the heavy duty powder coated structural steel along with the welded headache rack, this frame will have a capacity of a massive 4,500 LB. Allowing you to tackle even the toughest jobs while providing rust resistance to the steel from the elements of the weather.
• See more on Amazon...

Features

• ECONOMICAL LIGHT WEIGHT DESIGN: The 60" Skid Steer Bucket is constructed using 1/8" structural steel. The sidewall thickness is an impressive 1/2" thick, providing plenty of support. At the top of this dirt and debris bucket, we have added a 2" x 4" 9 gauge tubular steel support which adds to the structural integrity other dirt buckets simply do not have.
• UNIVERSAL SKID STEER CONNECTION: Our superior design allows this skid steer bucket to fit with almost all skid steers, loaders, and tractors. This kind of versatility creates an opportunity for you to use it across various brands of tractors, such as the Ford 8n, 9n, Kubota, BX, Kioti, or John Deere tractors. This kind of connection is known as SSQA or Universal Skid steer style quick connect.
• A MUST HAVE FOR LANDSCAPING AND CONSTRUCTION: Titan Attachments Low Profile Skid Steer Bucket is designed to easily scoop and transport material such as dirt, mulch, rocks, debris, snow and more. This makes this skid steer bucket ideal in any situation and an invaluable attachment for your tractor and skid steer.
• PERFECT SIZE FOR ANY TASK: With the inside dimensions of 60 wide, 26.5 deep, and 20 height, you can carry plenty of material which allows you to make less trips, saving time and money. The light weight design allows you to utilize your loaders lifting capacity and carry these larger loads.
• See more on Amazon...

Features

• ECONOMICAL DESIGN: The 6ft Skid Steer Fine Grade Rock Bucket is constructed using 1/2-in grade 50 structural steel. The sidewall thickness is an impressive 1/2-in thick, providing plenty of support. At the top of this rock and debris bucket, we have added a 4-in x 4-in 9-gauge tubular steel support which adds to the structural integrity other rock buckets simply do not have.
• UNIVERSAL SKID STEER CONNECTION: Our superior design allows this skid steer skeleton rock bucket to fit with almost all skid steers, loaders, and tractors. This kind of versatility creates an opportunity for you to use it across various brands of tractors, such as the Ford 8n, 9n, Kubota, BX, Kioti, or John Deere tractors. This kind of connection is known as SSQA or Universal Skid steer style quick connect.
• A MUST HAVE FOR LANDSCAPING AND CONSTRUCTION: Titan Attachments Low Profile Skid Steer Rock Skeleton Bucket is designed to easily scoop and sift material and debris from dirt, mulch, rocks, debris, snow and more. This makes this skid steer bucket ideal in any situation and an invaluable attachment for your tractor and skid steer.
• PERFECT SIZE FOR ANY TASK: With the overall dimensions of 72-in wide, 51.5-in deep, and 20-in high, you can carry plenty of material which allows you to make less trips, saving time and money. The light weight design allows you to utilize your loaders lifting capacity and carry these larger loads.
• See more on Amazon...

Features

• ORGANIZE LIKE A PRO: Take control of your outdoors grilling by having all your accessories right at your fingertips. Use the prep station and accessory cart to make backyard cookouts easy!
• TWO SHELVES FOR BARBECUE PREP: Prepare your food with confidence and never worry about running out of space with two separate shelves for organizational efficiency.
• TOUGH STEEL CONSTRUCTION: This accessory cart is lightweight but strong, thanks to its steel frame. With proper care, it can help make your barbecues better for years to come!
• FOUR WHEELS FOR TRANSPORTATION: With locking caster wheels on the back and two fixed wheels on the front, this grill cart can be effortlessly moved from place to place, wherever you need it.
• DIMENSIONS: The cart height is 36, with a 24 x 14.5 overall footprint. The grate dimensions are 14 x 19, with the middle shelf at 16 in height and the upper shelf at 32 in height.
• See more on Amazon...

Features

• COMPATIBILITY: Fits skid steer loaders with a Toro Dingostyle hookup
• REMOVABLE FORK BLADES: Fits perfectly onto Toros. (2) 36 x 1.25 x 4 Fork Blades, easily removable and adjustable from 6 to 44
• DURABILITY: Frame and forks are made of heavyduty steel
• INCLUDES: (1) Toro fork attachment mast and (2) 36 pallet forks with a 4,000 lb lift capacity
• We need your phone number! For the trucking company to schedule delivery. Without it there will be delays.
• See more on Amazon...

Features

• HEAVY DUTY LIGHTWEIGHT DESIGN: The toro to skid steer adapter weighs only 115 LB, yet is built to allow your toro to mount directly to full size skid steer implements. This adapter is built with structural steel and reinforced with 2.5" x2 .5" tubular steel.
• UNIVERSAL SKID STEER CONNECTION: - Compatible with Toro Dingo, Ditch Witch, Multi One, Ram Rod, Vermeer, Finn Eagle, Boxer, Thomas, and others with Toro style mounting. It will not fit Bobcat, Kanga Kid, or Prodigy.
• A MUST HAVE FOR LANDSCAPING AND CONSTRUCTION: Titan Attachments Low Profile Toro to Skid Steer Adapter now allows you to take advantage of your full size skid steer attachments and allowing them to be used with your toro, boxer, ditch witch or other mini skid steer making it an invaluable piece of equipment.
• NO WELDING OR MODIFICATION NEEDED: This adapter comes ready to attach directly to your Toro without any modifications, bolting or welding required. Drive your mini skid steer right up to the back of the adapter, hook into the top and drop your pins. It is that easy!
• See more on Amazon...

Features

• DESIGNED FOR BUCKETS AND FORK BLADES: The quick spade is designed to clamp directly onto your bucket's cutting edge. With the puck, it will slide onto buckets that are up to 1-1/2" thick and 2" without the puck. The spade can also slide onto your fork blades and is secured using the heavy-duty side bolts to prevent the spade from sliding off or shifting on your forks.
• GREAT FOR LANDSCAPING: The possibilities are endless with this clamp-on quick spade, which makes it ideal for landscaping companies. Use it to build trenches, dig footings, plant, or even dig tree stumps.
• WON'T DAMAGE YOUR BUCKET: Single clamping models put all the downforce onto a small area of your bucket, which can cause it to bend and warp. The dual design spreads this load across a larger area preventing this from happening.
• HEAVY-DUTY DESIGN: The Clamp-On Tree Spade has a blade made from 3/8 thick A36 steel with a support frame made from 1/4 thick A36 steel. The 2 thick pucks are 3 in diameter and provide plenty of surface area for the clamps. The entire quick spade is powder-coated to protect against rust and corrosion.
• DIMENSIONS: The overall dimensions of the combo Quick Spade for buckets and pallet fork blades are 18 wide by 45 long. The spade blade alone is 18 wide by 27-1/2 long. The fork pockets measure 4-3/4 x 1-1/2. The clamping pucks are 3 in diameter and are 2 thick.
• See more on Amazon...

Features

• DESIGNED FOR 3 POINT PINE RAKE: This pack of needle tines is a direct replacement for the outer tines found on the 4 FT, 5 FT, and 6 FT 3 Point Pine Straw Needle Rakes.
• FOUR OUTER TINES: These replacement tines are sold in packs of four replaced the outer tines on your pine rake.
• HEAT TREATED TINES: The tines are heat treated for maximum efficiency and designed to replace the outer tines on your Pine Rake.
• RAKE YOUR GROUND OF PINE NEEDLES: Pine rakes are a must-have tool for raking your ground. These thin tines scrape across the surface and collect the pesky pine needles with ease. This type of rake can also clear dead leaves, grass, sticks, and other debris that can harm and weaken your grassroots.
• STAY OPERATIONAL LONGER: Having the extra set of outer pine straw needle tines on standby allows you to stay operational even if the tines are damaged during use.
• See more on Amazon...

Features

• GLOBAL EURO TO HOOK AND PIN: This adapter is designed to convert your global euro styleloader over to the Hook and Pin system compatible with John Deere 400 and 500 series loaders. This allows you to easily connect other hook and pin attachments to your global loader without cutting, welding, or fabricating.
• A MUST HAVE FOR ALL GLOBAL EURO LOADERS: This adapter now allows you to connect your global loader to hook and pin attachments that are commonly found on the John Deere 400 and 500 series loaders. This opens the door to additional attachments that may not be available for your loader.
• DURABLE CONSTRUCTION: The heavyduty powdercoated steel provides strength and protects against elements of harsh weather. The 0.25inch structural steel frame along with the 2.5 x 3inch tubular steel provides reinforcement and add durability.
• DIMENSIONS: The overall width of this adapter is 49.75inches and the height is 19.5inches. The overall weight is 87pounds so you dont sacrifice your global tractors lifting capacity. The front holes for the hook and pin are 46.75inches apart, center to center with a 3.5inch vertical spacing.
• See more on Amazon...

Features

• UNIVERSAL DESIGN: Our H1200 5.5" wide flail hammer can fit a wide variety of flail mowers and cutters. This particular model is designed to replace 5.5" wide hammers with a 5/8" bolt hole that have worn down or have become cracked or broken. You can also replace your Yshaped knife blades to be more effective.
• DIMENSIONS: The Titan Attachments 5.5 wide hammer blade will have a 1.5 wide bolt slot and a 5/8 bolt hole diameter and an overall length of 4.5. These are sold and shipped in packs of 5 allowing you to save on cost and provide additional blades if needed.
• HEAVY DUTY STEEL CONSTRUCTION: The forged steel hammer blade will weigh 2.5 LB and provide plenty of mass for cutting through high grass, brush, and fallen branches. This hammer style allows you to cut a variety of grass, brush, and branches that a Yshaped blade simply cannot.
• GREAT FOR CONSTRUCTION AND LANDSCAPING: This flail hammer blade style is known to easily cut through branches and provide more cutting power then typical Yshaped knife blades. That makes the hammer blade the most diverse blade found on flail mowers and can be used in most all mowing applications.
• See more on Amazon...

Features

• STABILIZES YOUR TRACTOR: One of the worst things that can happen to your tractor is having it tip over as this can severely damage it. Fortunately, our attachment is designed to protect the integrity of your tractor s front axle. It improves traction by balancing and shifting the weight from the machine s weaker front end to its sturdier rear end so that it doesn t tip over.
• USE WITH MULTIPLE MATERIALS: A weighted hauler helps prevent your tractor from tipping over. With this handy attachment, you can fill up your ballast box with a multitude of different materials in order to add weight to your tractor. Use sand, steel, concrete, gravel, or rocks! Any of these materials will add stability to your tractor.
• MAKES AN EFFECTIVE TOOLBOX: With this ballast box, you don t need to juggle all your tools while you ride on your tractor. Instead, store your gear and accessories inside this ballast box. It comes with an integrated tool holder for your convenience. Its sliding front door allows you to easily open the box, so you can empty it and use it for tool storage instead.
• COMPATIBLE WITH JOHN DEERE TRACTORS: This ballast box attachment is specifically made for John Deere tractors and is even compatible with most iMatch technology. It comes in John Deere s signature green color so that it won t clash with your machinery. Additionally, it is powder coated for extra protection and durability. Quick Hitch Compatible.
• DIMENSIONS: This ballast box measures at 25 1/2 x 24 1/4 x 15 3/4 and weighs 132 lbs. It has a vertical pin spread of 24.5 and a horizontal pin spread of 15 . The box has a volume of 5.3 cu. ft, the tool holder pocket has a diameter of 2 5/8, and from center fork pocket to center fork pocket, it measures 10 1/2 in length. From the bottom to the center of the lower lift pin, it is 9 .
• See more on Amazon...

Features

• MADE IN USA: Crafted in the USA with top-quality materials and precision workmanship, the Dual Hay Spear Mount Plate is designed to exceed your expectations consistently.
• EASILY TRANSPORT HAY BALES: With this tool, you can easily lift two small, square bales without putting strain on yourself or your equipment because this attachment will do the job for you every time.
• UNIVERSAL SKID STEER CONNECTION: This hay frame fits almost all skid steers, loaders, and tractors, such as the New Holland, Bobcat Skid Steer, and Kubota tractors. This connection is known as SSQA, or Universal Skid steer style quick connect.
• HAY SPEAR SLEEVES INCLUDED: The hay frame has two main Conus 2 hay spear sleeves welded to the frame body. This orientation is perfect for moving large round hay bales around your property when you have livestock to feed.
• DURABLE CONSTRUCTION: This frame is rated at a 4,000 LB capacity, allowing you to tackle even the toughest jobs while providing rust resistance to the steel from weather elements.
• See more on Amazon...

Features

• HEMISPHERE BOWL: 32inch Diameter hemisphere bowl sits at a comfortable 17inches high.
• NATURAL PATINA: Made from cast iron with a natural patina for a rustic, ornamental look.
• STURDY BASE: High-quality steel base cradles hemisphere for a wobble free design.
• DURABLE CONSTRUCTION: 0.25inch thick steel a durable design that will last for years.
• INCLUDES: fire poker and grate which have all been treated with a high temp finish.
• See more on Amazon...

Features

• A MUST HAVE FOR YOUR FIELD: The Titan Attachments 60-inch Disc Harrow with notched blades is a must-have for anyone looking for an affordable way to turn the soil in your field. Break up unwanted weeds and debris to prepare the soil for planting.
• 16-INCH NOTCHED DISCS: The 16-inch discs are notched to help break up wet, heavy soil with less gumming up and can power through heavier crop debris. These blades are great for land that has not been tilled in the past and are perfect for breaking up weed root systems allowing them to breakdown faster.
• CATEGORY 1, 3 POINT: This adapter comes ready to attach directly to your Tractor s Category 1, 3 Point hitch without any modifications, bolting or welding required. Back your tractor right up to the back of the adapter, hook into the top link bar, and connect your lower lift pins.
• DURABLE CONSTRUCTION: The 60-inch Disc Harrow is constructed using 2.5 x 2.5-inch steel tubing that is powder-coated to prevent rust and corrosion. The 16-inch notched discs are made from hardened steel. The 4-disc axles are equipped with cast iron bearing caps and spools that are greaseable.
• DIMENSIONS: The overall dimensions of the Cat 1, 3 Point 5 FT Disc Harrow are 60-inches wide x 45-inches deep x 30.5-inches high. The notched discs are 16-inches in diameter and spaced 7.5-inches apart. The lower lift pins on the 3 Point hitch are 3.5-inches long and measure 28-inches apart, center to center.
• See more on Amazon...

Features

• Fits John Deere Loaders.
• 2 Trailer Hitch Receiver.
• Fits Conus 2 hay bale spears.
• Safely move hay bales with the added stability of a headache rack.
• Pair of 60 Class II pallet forks included.
• See more on Amazon...