Trail Gear - Buying Guide
Last Updated: 03/28/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
(2) TRAIL BOSS License Plate Frames 3D Raised Letter Frame Brackets (1-Pair)
Asin: B07Z27MWWF | Ean: 7426842729795
Will Not Block Registration Stickers.
Made Of Plastic Will Not Rust.
Free 5" Decal Included.
Made In Usa.
Features
- (2) 3D Raised Letter License Plate Frames
- MADE IN USA
- WILL NOT BLOCK REGISTRATION STICKERS
- FREE 5 DECAL INCLUDED
- Made of Plastic WILL NOT RUST
- See more on Amazon...
Brand: Trail Boss | Manufacturer: Custom Car Gear
See On Amazon #2
Trail Gear Drive Shaft Spacer for Toyota 1.25 inch
Asin: B08Z3CMT4L
Part Number: Tg306548-1-Kit.
Brand: Trail Gear | Manufacturer: Trail-Gear
Weight: 2.00 Pounds
See On Amazon #3
Trail Gear 111314-1-KIT Bushing
Asin: B00AOUYHU0 | Ean: 0012433003237 | UPC: 012433003237
Designed To Fit Trail Gear Rear Leaf Springs Please Note: Some Greases May Damage Polyurethane. Before Greasing, Make Sure The Grease You Intend To Use Is Compatible With Polyurethane..
1985-95 Toyota 4Runner.
Features
- 1979-95 Toyota Pickup
- 1985-95 Toyota 4Runner
- Designed to fit Trail Gear rear leaf springs Please Note: Some greases may damage polyurethane. Before greasing, make sure the grease you intend to use is compatible with polyurethane.
- See more on Amazon...
Brand: Trail Gear | Manufacturer: Trail Gear
Dimensions: 7.50 x 3.50 x 7.50 inches | Weight: 1.00 pounds
See On Amazon #4
TRAIL-GEAR Small Diff Armor
Asin: B00AOTK520 | Ean: 0012433003862 | UPC: 012433003862
Made From 1/4" Plate Steel.
Also Fits 91-97 Fj80 Front Axle Housings.
Fits Front And Rear Solid Axle Housings.
Fits Snugly Over The Curved Face Of Your Solid Axle Housing.
Features
- Welds on to protect your ring gear from trail damage
- Fits snugly over the curved face of your solid axle housing
- Made from 1/4 plate steel
- Fits front and rear solid axle housings
- Also fits 91-97 FJ80 front axle housings
- See more on Amazon...
Brand: Trail Gear | Manufacturer: Trail-Gear
Dimensions: 7.50 x 3.50 x 7.50 Inches | Weight: 1.00 pounds
See On Amazon #5
Trail Gear Drive Shaft Spacer for Toyota 3/4 inch
Asin: B08Z3CSDS6
Part Number: Tg306547.
Brand: Trail Gear | Manufacturer: Trail-Gear
Weight: 2.00 pounds
See On Amazon #6
Trail Gear Driveshaft Spacer for Toyota 1.5''
Asin: B09BPZ26SB
Part Number: Tg301698-1-Kit.
Brand: Trail Gear | Manufacturer: Trail-Gear
Weight: 2.00 Pounds
See On Amazon #7
Driveshaft Spacer for Tacoma 1.5''
Asin: B07W58XGLT | Ean: 0012433018699 | UPC: 012433018699
6061-T6....
Includes (4) Grade-5 7/16 In. Bolts And (4) Nylock Locking....
Sold Individually....
1.500 In. (38 Mm)....
Features
- 1995-2020 Toyota...
- 1.500 in. (38 mm)...
- 6061-T6...
- Sold Individually...
- Includes (4) Grade-5 7/16 in. bolts and (4) Nylock locking...
- See more on Amazon...
Brand: Trail Gear | Manufacturer: Trail Gear
Dimensions: 2.40 x 4.90 x 6.00 inches | Weight: 3.00 Pounds
See On Amazon #8
Trail Gear Driveshaft Spacer for Toyota 1''
Asin: B09BPL7C5G
Part Number: Tg301697-1-Kit.
Brand: Trail Gear | Manufacturer: Trail Gear
Weight: 2.00 Pounds
See On Amazon #9
Trail Gear 111315-1-KIT Front Frame and Shackle Bushing 1979-95 Toyota Pickup 19
Asin: B07DB44TRZ | Ean: 0012433000649 | UPC: 012433000649
Designed To Fit Front Frame Tubes And Rear Shackle Mounts Please Note: Some Greases May Damage Polyurethane. Before Greasing, Make Sure The Grease You Intend To Use Is Compatible With Polyurethane..
1985-95 Toyota 4Runner.
Features
- 1979-95 Toyota Pickup
- 1985-95 Toyota 4Runner
- Designed to fit front frame tubes and rear shackle mounts Please Note: Some greases may damage polyurethane. Before greasing, make sure the grease you intend to use is compatible with polyurethane.
- See more on Amazon...
Brand: Trail Gear | Manufacturer: Trail Gear
Dimensions: 2.20 x 2.90 x 4.20 inches | Weight: 1.00 pounds
See On Amazon #10
Trail Gear 107510-1-KIT Twin Stick Shift Boot Kit
Asin: B07DB42BDS | Ean: 0012433001837 | UPC: 012433001837
Helps To Prevent Engine Heat And Smell From Cabin.
Flexible Rubber Shell With Steel Bottom Mounting Plate.
Features
- For Use with Trail Gear Creepy Twin Transfer Case Shifter
- Flexible Rubber Shell with Steel Bottom Mounting Plate
- Helps to Prevent Engine Heat and Smell from Cabin
- See more on Amazon...
Brand: Trail Gear | Manufacturer: Trail Gear
Dimensions: 4.70 x 12.20 x 6.90 inches | Weight: 4.00 pounds
See On Amazon #11
Trail-Gear Battery Box
Asin: B00CS87YQ0 | Ean: 1000887191975, 0012433000311 | UPC: 012433000311
The Tg Battery Box Works With Any Optima 34/78 Group Battery, Select Deka Intimidator 34/78 Group Batteries, And Select Deka Rebranded 34/78 Group Batteries..
Features
- Single Battery
- The TG Battery Box works with any optima 34/78 group battery, select Deka Intimidator 34/78 group batteries, and select Deka Rebranded 34/78 group batteries.
- See more on Amazon...
Brand: Trail Gear | Manufacturer: Trail Gear
Dimensions: 9.60 x 12.20 x 9.40 inches | Weight: 5.00 pounds
See On Amazon #12
Trail Gear IFS STEERING BOX MOUNT 130004-1-KIT
Asin: B00DEP3YUQ | Ean: 0700475699852, 0012433000144 | UPC: 700475699852, 012433000144
Brand: Trail Gear | Manufacturer: Trail Gear
Dimensions: 4.20 x 12.20 x 6.20 Inches | Weight: 6.00 pounds
See On Amazon #13
TRAIL-GEAR Toyota Solid Front Axle Extended Brake Line Kit (2 Front 1 Rear) 26" Long, DOT Approved
Asin: B00AOTKWCI | Ean: 0200887660513, 0012433005187 | UPC: 012433005187, 200887660513
26 In.....
(2) Front Brake....
3/16 In.....
1985-1995 Toyota....
Brand: Trail Gear | Manufacturer: Trail Gear
Dimensions: 7.50 x 3.50 x 7.50 inches | Weight: 1.00 pounds
See On Amazon #14
Trail-Gear Creeper Breather - Differential Breather Kit
Asin: B008OLPUJS | Model: 140207-1-KIT | PartNumber: 140207-1-KIT | Ean: 1100887103555
Expands And Contracts To Accommodate Increase Or Decrease In Housing Pressure.
Fits Front And Rear Axle Housing.
Kit Includes One Housing Fitting, Clamp And Bellows.
Prevents Dirt, Debris And Water From Getting In To Your Axle Through The Stock Axle Housing Breather.
Features
- 1/8 -28 BSPT x Barbed Brass Fitting
- Prevents dirt, debris and water from getting in to your axle through the stock axle housing breather
- Expands and contracts to accommodate increase or decrease in housing pressure
- Kit includes one housing fitting, clamp and bellows
- Fits front and rear axle housing
- See more on Amazon...
Brand: Trail Gear | Manufacturer: Trail-Gear
Dimensions: 3.50 x 7.50 x 7.50 inches | Weight: 0.00 pounds
See On Amazon #15
Trail Gear 105033-3-KIT Bomb Proof Transfer Case Mount 1986-1995 Suzuki Samurai
Asin: B07DB49CQJ | Ean: 0012433001653 | UPC: 012433001653
Greatly Reduces Drive Line....
Heavy Duty Design, Will Not....
No Additional....
Easy Bolt-In....
Features
- 1986-1995 Suzuki Samurai Have you installed lower transfer case gears in your Samurai? Lower than stock transfer case gears can stretch and damage stock rubber and aftermarket polyurethane transfer case mounts. Our heavy duty aluminum transfer case mounts are a solid way to attach your low range case. Easy installation, just unbolt the stock ones and replace. Kit contains three spacers and mounting...
- Easy bolt-in...
- Greatly reduces drive line...
- No additional...
- Heavy duty design, will not...
- See more on Amazon...
Brand: Trail Gear | Manufacturer: Trail Gear
Dimensions: 2.00 x 4.50 x 5.00 inches | Weight: 2.00 Pounds
See On Amazon #16
Trail Gear ROCK SLIDER KIT 120001-1-KIT
Asin: B00DEP47SE | Ean: 0012433000137, 0400887626230 | UPC: 012433000137, 400887626230
Compact To Mid-Size 2-Door....
One Pair The Mounting Legs Are Not Welded Onto The Slider, But Are Shipped Loose So That Legs Can Be Attached In Different Mounting Positions. Mounting Legs Are Pre-Notched On One Side And Can Be Trimmed If Needed On The Opposite Side. Mounting Legs Are 11 1/4" Long, So They Allow The Sliders To Stick Out Far Enough To Be Used As A Step If Desired. Frame Mounts Sold Separately - 542-120007-1 Made Out Of 1 3/4" Od X .120 Wall 1035 Domsix Mounting Legs, Three Per Sideshipped Raw With No Finish....
Standard Cab, Short Bed....
Features
- Universal 58"...
- Standard Cab, Short Bed...
- Compact to Mid-Size 2-Door...
- One Pair The mounting legs are not welded onto the slider, but are shipped loose so that legs can be attached in different mounting positions. Mounting legs are pre-notched on one side and can be trimmed if needed on the opposite side. Mounting legs are 11 1/4 long, so they allow the sliders to stick out far enough to be used as a step if desired. Frame mounts sold separately - 542-120007-1 Made out of 1 3/4 OD x .120 wall 1035 DOMSix mounting legs, three per sideShipped raw with no finish...
- See more on Amazon...
Brand: Trail Gear | Manufacturer: Trail Gear
Dimensions: 5.00 x 58.00 x 9.00 inches | Weight: 64.00 pounds
See On Amazon #17
Trail Gear 303534-KIT Weld On Zip Tie Brackets Bent tab design
Asin: B019XF9GKW | Ean: 0012433000656 | UPC: 012433000656
Fits 1/4" Wide Zip Ties.
10 Per Package.
12 Gauge Sae 1008 Steel.
Brand: Trail Gear | Manufacturer: Trail Gear
Dimensions: 0.70 x 4.10 x 4.30 inches | Weight: 1.00 pounds
See On Amazon #18
Trail Gear 140157-1-KIT 54mm Axle Socket
Asin: B019XEQZ52 | Model: 140157-1-KIT | PartNumber: 140157-1-KIT | Ean: 0012433000250 | UPC: 012433000250
Brand: Trail Gear | Manufacturer: Trail Gear
Dimensions: 2.80 x 6.20 x 6.80 inches | Weight: 2.00 Pounds
See On Amazon #19
Trail Gear Samurai Front Axle Service Kit 141003-3-KIT
Asin: B00AVXK7UY | Ean: 0012433006757 | UPC: 012433006757
High Quality At An Affordable Price.
One Kit Covers Both Knuckles.
Features
- Includes all of the parts needed to rebuild a Samurai front axle
- One kit covers both knuckles
- High quality at an affordable price
- See more on Amazon...
Brand: Trail Gear | Manufacturer: Trail Gear
Dimensions: 2.60 x 10.70 x 10.90 inches | Weight: 5.00 pounds
See On Amazon #20
Trail Gear 100004-1-KIT Triple Drilled Flange with T-Case Dust Cover 1979-85 Toy
Asin: B07DB4HRRT | Ean: 0012433000878 | UPC: 012433000878
All 8" Drop Out 3Rd Members.
Other Vehicles With An Rf1a Gear-Driven T-Case.
1979-85 Toyota 4Runner Has Bolt Patterns For 4Cyl Cv And Non-Cv Patterns, As Well As V6 Cv Patternfits:.
Features
- 1979-85 Toyota Pickup
- 1979-85 Toyota 4Runner Has bolt patterns for 4cyl CV and Non-CV patterns, as well as V6 CV patternFits:
- All 8 Drop Out 3rd Members
- Other vehicles with an RF1A Gear-Driven T-Case
- See more on Amazon...
Brand: Trail Gear | Manufacturer: Trail Gear
Dimensions: 3.50 x 5.00 x 4.90 inches | Weight: 2.00 pounds
See On Amazon #21
TRAIL-GEAR Suzuki Driveline Spacer Kit, 1.5" 86-89
Asin: B00AOTJW6A | Ean: 0012433001776 | UPC: 012433001776
Each Kit Contains One Spacer And Mounting Hardware..
Fits Front Or Rear Shaft.
1-1/2 Inch Length.
Features
- 1986-89
- 1-1/2 inch length
- Each kit contains one spacer and mounting hardware.
- Fits front or rear shaft
- See more on Amazon...
Brand: Trail Gear | Manufacturer: Trail Gear
Dimensions: 2.00 x 10.60 x 5.90 Inches | Weight: 2.00 pounds
See On Amazon #22
TRAIL-GEAR Suzuki Samurai Heavy Duty Transfercase Mount Kit
Asin: B00AOTJRGU | Ean: 0300475898127 | UPC: 300475898127
Easy To Install.
Kit Contains Three Spacers.
Made From Aluminum As Apposed To Stock Rubber.
Features
- Stronger than stock
- Made from aluminum as apposed to stock rubber
- Easy to install
- Kit contains three spacers
- See more on Amazon...
Brand: Trail Gear | Manufacturer: Trail-Gear
Weight: 4.00 pounds
See On Amazon #23
TRAIL-GEAR Weld In Threaded Tube Adapter Bung, 1"-14 Left Hand For 1.5" ID Tube
Asin: B00AOTKU1G | Ean: 0012433002445 | UPC: 012433002445
For Use In 1.5" Id Tubing.
High Quality Construction At An Affordable Price.
Features
- Ideal for creating suspension links
- High quality construction at an affordable price
- For use in 1.5 ID tubing
- See more on Amazon...
Brand: Trail Gear | Manufacturer: Trail-Gear
Weight: 1.00 pounds
See On Amazon #24
Trail Gear 120210-KIT Weld-On Light Bar Tabs
Asin: B07DHRC751 | Ean: 0012433003848 | UPC: 012433003848
Pair.
Coped For 1 1/2" Or 1 3/4" O.D. Tubing.
Cnc Formed From 1/8" Thick 1010 Steel.
Unpainted.
Features
- 1/2 in. Bolt Hole
- Unpainted
- Pair
- CNC formed from 1/8 thick 1010 steel
- Coped for 1 1/2 or 1 3/4 O.D. tubing
- See more on Amazon...
Brand: Trail Gear | Manufacturer: Trail Gear
Dimensions: 1.20 x 3.70 x 4.20 inches | Weight: 1.00 pounds
See On Amazon