UCTRONICS - Buying Guide
Last Updated: 05/08/2024
Share on
Bestselling from UCTRONICS on Amazon
- UCTRONICS PoE Splitter USB-C 5V - Active PoE to USB-C Adapter, IEEE 802.3af Compliant for Raspberry ...
- UCTRONICS 19" 1U Rackmount for Raspberry Pi, SSD Bracket for Any 2.5" SSDs, Hold Up to 5 Raspberry P...
- UCTRONICS IEEE 802.3af Micro USB Active PoE Splitter Power Over Ethernet 48V to 5V 2.4A for Tablets,...
- UCTRONICS 0.96 Inch OLED Module 12864 128x64 Yellow Blue SSD1306 Driver I2C Serial Self-Luminous Dis...
- UCTRONICS Micro SD to Micro SD Card Male to Female Flexible Extender, 15cm/5.9in Micro SD Card Exten...
- UCTRONICS 19 1U Rack Mount for Raspberry Pi with SSD Mounting Brackets, Thumbscrews Front Removable...
- UCTRONICS DC 9V 12V 24V to DC 5V 5A Buck Converter Module, 9-36V Step Down to USB 5V Transformer Dua...
- UCTRONICS Front Removable 1U Rack Mount for Raspberry Pi, with 4 Mounting Brackets for Raspberry Pi ...
- UCTRONICS Pi Rack Pro for Raspberry Pi 4B, 19" 1U Rack Mount, Support for 4 2.5" SSDs, Secure Shutdo...
- UCTRONICS Gigabit PoE Splitter 5V 3A, 2-in-1 PoE to USB C/Micro USB Adapter, IEEE 802.3af/at Complia...
#1
UCTRONICS PoE Splitter USB-C 5V - Active PoE to USB-C Adapter, IEEE 802.3af Compliant for Raspberry Pi 4, Google WiFi, Security Cameras, and More
Asin: B087F4QCTR | Model: GuangDa | PartNumber: GuangDa
Why Poe To Usb-C – A Cost-Effective Way To Add Plug-And-Play Poe Support To 5V Usb-C Powered Devices And Make Full Use Of Poe Switches, Or For A Raspberry Pi 4 Setup Where A Poe Hat Is Not Applicable.
Note – 1. This Splitter Does Not Support Pd Or Qc Fast Charging Protocols. 2. This Splitter Provides A Maximum Output Of 2.4A With Its 802.3Af Compliance. Check B07v35dh5f For Power-Hungry Applications. 3. Just Put The Split Ethernet Aside If You Don’T Need The Data. 4. The Split Ethernet Cable Does Not Carry Power Anymore..
What Else Needed - You Need An Ieee 802.3Af Compliant Poe Switch Or Injector To Serve As The Pse (Power Source Equipment) And An Ethernet Cable With Poe Signal To Feed The Splitter..
What Is Poe – Deliver Power And Data With A Single Ethernet Cable For Fewer Wall Plugs And Messed Cables. Extend Powerline To Where No Ac Outlets Are Nearby, Up To 300 Feet Away From The Power Source.
Features
- What is it - A UCTRONICS PoE splitter to split the PoE signal into 5V USB-C power supply and gigabit Ethernet in RJ45 so that non-PoE devices can be powered over Ethernet.
- What is PoE Deliver power and data with a single Ethernet cable for fewer wall plugs and messed cables. Extend powerline to where no AC outlets are nearby, up to 300 feet away from the power source
- Why PoE to USB-C A cost-effective way to add plug-and-play PoE support to 5V USB-C powered devices and make full use of PoE switches, or for a Raspberry Pi 4 setup where a PoE HAT is not applicable
- What else needed - You need an IEEE 802.3af compliant PoE switch or injector to serve as the PSE (Power Source Equipment) and an Ethernet cable with PoE signal to feed the splitter.
- Note 1. This splitter does not support PD or QC fast charging protocols. 2. This splitter provides a maximum output of 2.4A with its 802.3af compliance. Check B07V35DH5F for power-hungry applications. 3. Just put the split Ethernet aside if you don t need the data. 4. The Split Ethernet cable does not carry power anymore.
- See more on Amazon...
Brand: UCTRONICS | Manufacturer: UCTRONICS
Dimensions: 0.92 x 3.22 x 1.12 Inches
See On Amazon #2
UCTRONICS 19" 1U Rackmount for Raspberry Pi, SSD Bracket for Any 2.5" SSDs, Hold Up to 5 Raspberry Pi 5/4B Boards, Front-Removable with Captive Screws
Asin: B09STTXWZZ | Model: U6264 | PartNumber: U6264
The Ssd Bracket Also Has Two Holes Reserved For The Sd Card Extension Adapter Asin: B09ckrdfth, Allowing You To Access The Sd Card From The Front Of The Rackmount. Note: The Sata To Usb Adapter Is Not Included, Please Search For Asin: B09cd94g5r To Get The Sata Adapter As You Need..
Compatible With Poe Hat: Compatible With Mini Poe Hat On It, Search B082zldmz6 To Get Mini Poe Board Or Search B09mcgfx12 To Get Fan Version..
Easy To Setup: Uses Captive Loose-Off Screws For True No-Installation, No Screwdriver Is Needed To Introduce Your Module Into The Enclosure..
Support Up To 5 Modules: This Solution Allows You To Use Multiple Pi Boards At The Same Time. With Hardware Connections, You Can Install Up To Five Modules, Which Is More Beneficial For You To Create Clusters For Distributed Computing Or Manage Cluster Tasks..
Features
- Designed for Raspberry Pi and 2.5-inch SSD: Supports installation of 5 Raspberry Pis and 5 ssds, compatible with any 2.5 Solid State Drive (7mm) and Rpi 4B/3B+, and other B/B+ models. Please note that the thickness of a 2.5" SSD cannot exceed 7mm.
- Support Up to 5 modules: This solution allows you to use multiple pi boards at the same time. With hardware connections, you can install up to five modules, which is more beneficial for you to create clusters for distributed computing or manage cluster tasks.
- The SSD bracket also has two holes reserved for the SD card extension adapter ASIN: B09CKRDFTH, allowing you to access the SD card from the front of the rackmount. NOTE: The SATA to USB adapter is not included, please search for ASIN: B09CD94G5R to get the SATA adapter as you need.
- Easy to Setup: Uses Captive loose-off screws for true no-installation, no screwdriver is needed to introduce your module into the enclosure.
- Compatible with PoE HAT: Compatible with mini POE HAT on it, search B082ZLDMZ6 to get mini PoE board or search B09MCGFX12 to get fan version.
- See more on Amazon...
Brand: UCTRONICS | Manufacturer: UCTRONICS
Dimensions: 1.75 x 19.00 x 4.33 inches
See On Amazon #3
UCTRONICS IEEE 802.3af Micro USB Active PoE Splitter Power Over Ethernet 48V to 5V 2.4A for Tablets, Dropcam or Raspberry Pi 2/3B+ (48V to 5V 2.4A)
Asin: B01MDLUSE7 | Model: U5159 | PartNumber: U5159
Compatible With 44-57V Dc Voltage, Overvoltage Protection.
Suitable For Android Tablets, Dropcam, Raspberry Pi – Micro Usb. 2-Pack: B07qprvm51.
Support Ieee 820.3Af Poe Switch, 48V Unsolicited Power Over Ethernet Poe Switch Or Ethernet Poe Adapter, 48V Injector. For Gigabit Poe Switches Users, Gigabit Splitter U515902 Is Recommended.
Power Output Port: 5V 2.4A Micro Usb Power Plug.
Features
- 12 watt micro USB Power over Ethernet PoE up to Remote 328-492ft (100-150m) via Ethernet cable, 802.3af PoE switch or 48v injector is needed
- Power Output Port: 5V 2.4A Micro USB Power Plug
- Compatible with 44-57V DC voltage, overvoltage protection
- Support IEEE 820.3af PoE Switch, 48V Unsolicited Power Over Ethernet PoE Switch or Ethernet PoE Adapter, 48v injector. For gigabit PoE switches users, gigabit splitter U515902 is recommended
- Suitable for Android Tablets, Dropcam, Raspberry Pi Micro USB. 2-Pack: B07QPRVM51
- See more on Amazon...
Brand: UCTRONICS | Manufacturer: UCTRONICS
Dimensions: 1.97 x 3.15 x 0.59 Inches | Weight: 0.13 pounds
See On Amazon #4
UCTRONICS 0.96 Inch OLED Module 12864 128x64 Yellow Blue SSD1306 Driver I2C Serial Self-Luminous Display Board for Arduino Raspberry Pi Pico
Asin: B072Q2X2LL | Model: U602602 | PartNumber: U602602
Embedded Driver Ic: Ssd1306. Communication: I2c/Iic Interface, Only Need Two I / O Ports.
No Embedded Fonts Inside The Oled Controller, User Can Create The Fonts Through The Font Generation Software. We Offer Technical Support And Software Library As Well As The Guide Book In The Package. Note: The Display Part Is 15Mm±0.5 Tall..
Need More Than 1 Pc? Please Refer To Asin: B08ky21sr2 (2Pcs).
Needn't Backlight, The Display Unit Can Self-Luminous. It Has Super High Contrast, Bright And Crisp Dots, Even Tiny Fonts Quite Readable.
Resolution: 128 X 64, View Angle: > 160°, Support Voltage: 3.3V-5V Dc, Power Consumption: 0.04W During Normal Operation, Full Screen Lit 0.08W.
Features
- UCTRONICS 0.96 Inch OLED Module for showing graphical & textual information directly on your micro-controller projects. It supports many chips: Arduino UNO and Mega, Raspberry pi, 51 MCU, STIM 32, etc., the UNO shown in the picture is NOT INCLUDE
- Resolution: 128 x 64, View angle: > 160 , Support voltage: 3.3V-5V DC, Power consumption: 0.04W during normal operation, full screen lit 0.08W
- Embedded Driver IC: SSD1306. Communication: I2C/IIC Interface, only need two I / O ports
- Needn't backlight, the display unit can self-luminous. It has Super High Contrast, bright and crisp dots, even tiny fonts quite readable
- No embedded fonts inside the OLED controller, user can create the fonts through the font generation software. We offer technical support and software library as well as the guide book in the package. Note: the display part is 15mm 0.5 tall.
- Need more than 1 pc? Please refer to Asin: B08KY21SR2 (2pcs)
- See more on Amazon...
Brand: UCTRONICS | Manufacturer: UCTRONICS
Dimensions: 0.39 x 1.18 x 1.18 Inches | Weight: 0.00 pounds
See On Amazon #5
UCTRONICS Micro SD to Micro SD Card Male to Female Flexible Extender, 15cm/5.9in Micro SD Card Extension Cable Adapter Compatible with Raspberry Pi, Arduino, and 3D Printer, 4 Pack
Asin: B09CKRDFTH
Easy Installation: Simply Insert One Section Of The Flexible Board Into The Sd Card Slot, And Fix The Other End On The Bracket With Screws. The Sockets Are Push-Push, Just Insert The Card In To Lock, And Press In Again To Release It..
Made Of Ffc, This Sd Card Adapter Can Recognize Sd Cards Quickly And Is Long Enough Without Affecting The Reading Speed At All For Your Raspberry Pi Cluster Project..
As Optional Accessories For The Raspberry Pi 1U And 2U Rackmount. There Is 2 Holes On The Adapter Which Is Totally Compatible With The Screw Hole Of The Rpi Mounting Plate..
Features
- You Will Be Getting: 4 pieces of 15mm/5.9inch SD card flexible adapters. Specially designed for Raspberry Pi 4B/3B/3B+, and other B/B+ Models to stretch out its Micro SD card sockets.
- As optional accessories for the Raspberry Pi 1U and 2U Rackmount. There is 2 holes on the adapter which is totally compatible with the screw hole of the RPi mounting plate.
- Easy installation: Simply insert one section of the flexible board into the SD card slot, and fix the other end on the bracket with screws. The sockets are push-push, just insert the card in to lock, and press in again to release it.
- Made of FFC, this SD card adapter can recognize SD cards quickly and is long enough without affecting the reading speed at all for your Raspberry Pi cluster project.
- See more on Amazon...
Brand: UCTRONICS | Manufacturer: UCTRONICS
Weight: 0.07 Pounds
See On Amazon #6
UCTRONICS 19 1U Rack Mount for Raspberry Pi with SSD Mounting Brackets, Thumbscrews Front Removable Bracket Supports Up to 4 Raspberry Pi 5, 3B/3B+, 4B and 4 SSDs, Option SD Card Adapter
Asin: B09QQ9TQWL | Model: U6261 | PartNumber: U6261
Easy To Setup: Just Use Two Included Thumbscrews To Mount The Rackmount, Which Adopts A Screw-In Design, Which Helps You Install And Replace Quickly And Easily, No Tools Needed!.
Optional Accessories: Single Mounting Bracket: B09gfqlpty; Micro Sd Card Extension Adapter Asin: B09ckrdfth. I/O Panel: B09fxrqpfm.
Compatible With Poe/Poe+ Hat: You Can Use Raspberry Pi Official Poe+ Hat And Our Poe Hat On It, Search B082zldmz6 To Get Mini Poe Board Or Search B09mcgfx12 To Get Fan Version..
Applications: This Is A Hardware Solution To Get Ingenious Use Of The Raspberry Pi, With This Kit And Open Source Software Openmediavault, You Can Use The Pi As A Nas Server, Surveillance Station, Or Even A Web Server..
The Ssd Mounting Bracket Also Has Two Holes Reserved For The Sd Card Extension Adapter Asin: B09ckrdfth, Which Allows You To Access The Sd Card From The Front Of The Rack..
Features
- Design for Raspberry Pi: Supports installation of 4 Raspberry Pis and 4 ssds, compatible with any 2.5 Solid State Drive (7mm/9mm) and Rpi 4B/3B+, and other B/B+ models.
- The SSD mounting bracket also has two holes reserved for the SD card extension adapter ASIN: B09CKRDFTH, which allows you to access the SD card from the front of the rack.
- Easy to Setup: Just use two included thumbscrews to mount the rackmount, which adopts a screw-in design, which helps you install and replace quickly and easily, no tools needed!
- Applications: This is a hardware solution to get ingenious use of the Raspberry Pi, with this kit and open source software OpenMediaVault, you can use the Pi as a NAS Server, Surveillance station, or even a Web server.
- Optional accessories: Single mounting bracket: B09GFQLPTY; Micro SD card extension adapter ASIN: B09CKRDFTH. I/O Panel: B09FXRQPFM
- Compatible with PoE/PoE+ HAT: You can use Raspberry Pi official POE+ HAT and our POE HAT on it, search B082ZLDMZ6 to get mini PoE board or search B09MCGFX12 to get fan version.
- See more on Amazon...
Brand: UCTRONICS | Manufacturer: UCTRONICS
Dimensions: 2.50 x 20.00 x 4.50 inches | Weight: 1.70 pounds
See On Amazon #7
UCTRONICS DC 9V 12V 24V to DC 5V 5A Buck Converter Module, 9-36V Step Down to USB 5V Transformer Dual Output Voltage Regulator Board [2 Pack]
Asin: B07XXWQ49N | Model: U6223 | PartNumber: U6223
High-Efficient Transformation: The Module Adopts The New Technology Synchronous Rectification, Which Improves Conversion Efficiency Obviously And Expands The Working Voltage And Current..
Application: As A Usb 5V Buck Converter, Diy A Phone Charger, Refit Car Charger, Supply Power To Raspberry Pi 4 B..
Mini And Portable: 63 X 2 X 10Mm, Suitable For Various Narrow Installation Space And Small Case..
Input Port: 5.5Mm×2.1Mm Dc Socket And Wiring Terminal, Each Way Makes The Module Work; Output Port: Usb And Wiring Terminal, Can Output Power At The Same Time..
Features
- Power Supply: DC 9-36V; Output Voltage: 5-5.3V; Output Power: 18W to 30W (input DC 9-24V, output 5.2V/6A; input DC 24-32V, output 5.2V/5A; input DC 32-36V, output 5.2V/3.5A)
- Input Port: 5.5mm 2.1mm DC socket and wiring terminal, each way makes the module work; Output Port: USB and wiring terminal, can output power at the same time.
- High-efficient Transformation: the module adopts the new technology synchronous rectification, which improves conversion efficiency obviously and expands the working voltage and current.
- Mini and Portable: 63 x 2 x 10mm, suitable for various narrow installation space and small case.
- Application: as a USB 5V buck converter, DIY a phone charger, refit car charger, supply power to raspberry pi 4 b.
- See more on Amazon...
Brand: UCTRONICS | Manufacturer: UCTRONICS
Weight: 0.10 Pounds
See On Amazon #8
UCTRONICS Front Removable 1U Rack Mount for Raspberry Pi, with 4 Mounting Brackets for Raspberry Pi 5, 4B, 3B+/3B, and Other B Models
Asin: B09D7RR6NY | Model: U6195 | PartNumber: U6195
Improvement - Thumbscrew, Quality Metal Material, And The Grip Knob Thumb Screw Adopt A Screw-In Design, Which Helps You Install And Replace Quickly And Easily, No Tools Needed!.
Options - Sd Card Extension Cable Asin: B09ckrdfth Is Available To Make A Different Configuration For Your Different Pi Racks..
Standard 1U Size: 19"×1.75"(482.6×44.5Mm), Fully Compatible With 19” Server Racks, Had No Issue Plugging This Into The 1U Rack Space..
Wide Compatibility- The Rackmount Can House Up To 4 Rpis, And The Rpi Mounting Bracket Supports Raspberry Pi 4 B And 3 B/B+ And All Other B Models..
Features
- IMPROVEMENT - Front-Removable, the mounting bracket allows each Raspberry Pi can be individually removed from the front without removing the whole thing.
- Wide Compatibility- The rackmount can house up to 4 RPis, and the RPi mounting bracket supports Raspberry Pi 4 B and 3 B/B+ and all other B models.
- IMPROVEMENT - Thumbscrew, quality metal material, and the grip knob thumb screw adopt a screw-in design, which helps you install and replace quickly and easily, no tools needed!
- Standard 1U Size: 19 1.75(482.6 44.5mm), fully compatible with 19 server racks, had no issue plugging this into the 1U rack space.
- Options - SD card Extension Cable ASIN: B09CKRDFTH is available to make a different configuration for your different Pi racks.
- See more on Amazon...
Brand: UCTRONICS | Manufacturer: UCTRONICS
Warranty: 6 Months
See On Amazon #9
UCTRONICS Pi Rack Pro for Raspberry Pi 4B, 19" 1U Rack Mount, Support for 4 2.5" SSDs, Secure Shutdown, 0.96" Color Display for Raspberry Pi
Asin: B0B6TW81P6 | Model: RM0004 | PartNumber: RM0004
【Safety Shutdown】4 Power Buttons Can Be Pressed To Achieve A Soft Shutdown, And Then Press To Power On. No Longer Worry About The Damage Caused By A Hard Shutdown On The Raspberry Pi..
【19" 1U Rack Mount】19×5.72×1.75 Inch(482.6×145.4×44.5Mm), The Pi Rack Can Be Installed Into The Cabinet Or Placed On The Desktop. This Solution Not Only Beautifies Your Cabinet And Desktop But Also Keeps Dust Out..
Note: If You Are Using The Raspberry Pi Os (Debian Version: 12 (Bookworm)), You Need To Press The Button Twice To Turn Off The Pi..
【0.96" Lcd Display】Graphical Display Of Ram/Disk/Temp Usage, Ip Address Always On, And Also Supports Custom Display Content..
【4 Sata Shields】No Need For Sata-To-Usb Cables, Just Plug In 4 2.5" Ssds For Additional Storage Capabilities. The Board Is Also Reserved For A Fan Interface, Which Supports External 2.54 2Pin Fans To Cool The Raspberry Pi. Please Note That The Thickness Of A 2.5" Ssd Cannot Exceed 7Mm..
Features
- For Raspberry Pi 4B Designed specifically for the Raspberry Pi 4B, the Raspberry Pi rack allows you to install up to 4 RPis, making it easy to build small Raspberry Pi clusters.
- 4 SATA shields No need for SATA-to-USB cables, just plug in 4 2.5 SSDs for additional storage capabilities. The board is also reserved for a fan interface, which supports external 2.54 2pin fans to cool the Raspberry Pi. Please note that the thickness of a 2.5 SSD cannot exceed 7mm.
- Safety Shutdown 4 power buttons can be pressed to achieve a soft shutdown, and then press to power on. No longer worry about the damage caused by a hard shutdown on the Raspberry Pi.
- 0.96 LCD display graphical display of RAM/Disk/Temp usage, IP address always on, and also supports custom display content.
- 19 1U Rack Mount 19 5.72 1.75 inch(482.6 145.4 44.5mm), the pi rack can be installed into the cabinet or placed on the desktop. This solution not only beautifies your cabinet and desktop but also keeps dust out.
- Note: If you are using the Raspberry Pi OS (Debian version: 12 (Bookworm)), you need to press the button twice to turn off the Pi.
- See more on Amazon...
Brand: UCTRONICS | Manufacturer: UCTRONICS
Dimensions: 1.75 x 5.72 x 19.00 Inches
Warranty: 6 Months
See On Amazon #10
UCTRONICS Gigabit PoE Splitter 5V 3A, 2-in-1 PoE to USB C/Micro USB Adapter, IEEE 802.3af/at Compliant 10/100/1000Mbps for Raspberry Pi 3/4, Security IP Cameras and More
Asin: B0BLBX1795
【Power Supply & Data Transmission】It Supplies Power And Transfers Data Between Poe Switch/ Poe Injector And Non-Poe Device Meanwhile Via One Single Ethernet Cable To Poe Devices, Expanding Network To Anywhere You Need Network Devices But No Power Lines Or Outlets..
【Wide Compatibility】The Gigabit Poe Splitter Is Compatible With Raspberry Pi 4B+/4B/3B+/3B, Security Ip Cameras, Tablets, Smart Home Devices, Ip Phones, Wireless Aps And Other Non-Poe Devices.
【Plug & Play】 Just Plug The Adapter On The Poe Splitter Into The Micro Usb Port, Then The Micro Usb Port Is Changed To Be A Usb-C Port. Set Up Easily, Switch Freely, And Transfer Stably..
【Gigabit Ieee 802.3Af/At Compliant】Power Over Ethernet Ieee 802.3Af/At Compliant; 10/100/1000 Mbps Rj45 Ports; 5V 3A Power Supply; With Overvoltage Protection, Short-Circuit Protection And Overcurrent Protection..
Features
- 2-in-1 port A Micro USB to USB-C adapter is added on the PoE Splitter to make it a 2-in-1 PoE Splitter, making PoE to Micro USB and USB C devices more easily accessible.
- Gigabit IEEE 802.3af/at Compliant Power over Ethernet IEEE 802.3af/at compliant; 10/100/1000 Mbps RJ45 ports; 5V 3A power supply; with overvoltage protection, short-circuit protection and overcurrent protection.
- Power Supply & Data Transmission It supplies power and transfers data between PoE switch/ PoE injector and non-PoE device meanwhile via one single ethernet cable to PoE devices, expanding network to anywhere you need network devices but no power lines or outlets.
- Plug & Play Just plug the adapter on the PoE splitter into the Micro USB port, then the Micro USB port is changed to be a USB-C port. Set up easily, switch freely, and transfer stably.
- Wide Compatibility The Gigabit PoE splitter is compatible with raspberry pi 4B+/4B/3B+/3B, Security IP Cameras, Tablets, Smart Home Devices, IP phones, wireless APs and other non-POE devices
- See more on Amazon...
Brand: UCTRONICS | Manufacturer: UCTRONICS
Warranty: 1 year warranty
See On Amazon #11
UCTRONICS PoE HAT for Raspberry Pi 4B/3B+, Power Over Ethernet (PoE) Support 802.3af PoE Network Standard, Compatible with Pi 4B / 3B+
Asin: B082ZLDMZ6 | Model: U6109 | PartNumber: U6109
Output Power: Dc 5V (2.5A Max); Total Power Budget: 12.5W; Ieee 802.3Af Compliant.
Well-Ventilated Environment Recommended: It’S Normal To Become Hot When The Hat Operating. Please Make Sure The Adequate Air Circulation To Help It Dissipate Heat To Ensure Stable Operation. If Used With Pi 4, You Can Search Asin B07wmnxb4v To Get The Case With The Fan..
Smaller Size: 65*44*13Mm, Nearly Half The Official Size, Save More Space For Your Other Hardware, Can Be Held In The Most Case For Raspberry Pi..
Update: This Lastest Uc-858 Mini Poe Hat Compatible With 48V Non-Standard Switches So It Can Supports More Brands Of Switches..
Features
- For Pi 4 and 3 B+: This PoE HAT can be used to deliver clean and reliable power to the raspberry pi 3 model B+ and raspberry pi 4 model B (not included). Note: It's not recommend to use RJ45 with aluminum foil shielding to connect the PoE Hat to the PoE switch.
- Update: This lastest UC-858 mini PoE HAT Compatible with 48V non-standard switches so it can supports more brands of switches.
- Output Power: DC 5V (2.5A Max); Total Power Budget: 12.5W; IEEE 802.3af Compliant
- Smaller Size: 65*44*13mm, nearly half the official size, save more space for your other hardware, can be held in the most case for Raspberry Pi.
- Well-ventilated Environment Recommended: It s normal to become hot when the HAT operating. Please make sure the adequate air circulation to help it dissipate heat to ensure stable operation. If used with Pi 4, you can search ASIN B07WMNXB4V to get the case with the fan.
- See more on Amazon...
Brand: UCTRONICS | Manufacturer: UCTRONICS
Dimensions: 0.94 x 3.10 x 2.20 Inches
See On Amazon #12
UCTRONICS Ultimate Rack with PoE Functionality for Raspberry Pi 4, 19" 1U Rackmount with PoE HAT, All IO on One Side, OLED Display, Power Switch, and Cooling Fan
Asin: B0998MXWR6 | Model: U6145 | PartNumber: U6145
Re-Locate: Remove All Of The I/O Ports And Sd Card Slot To The Front To Access Easily, And The Push-Button Switch Allows You To Do A Shutdown Without Having To Command It From The Os Or Unplugging The Power Cable..
Optional Accessories: Ssd Bracket (Asin: B093grd7sj), Blank Cover (Asin: B091thnkgf). Note: The Poe Hat Output Is 5V 2.5A, Please Be Careful Not To Take On Too Much Load. And It Doesn't Support Qc Protocol..
Effective Cooling: The Rerouting Boards Assembled With A Cooling Fan, Which Provides Powerful Heat Dissipation To Keep The Rpi From Overheating..
Visible: A 0.91 Inch Oled Screen, The First Line Shows The Ip Address, And He Second Line Loops Through Three Rows: The Cpu Temp & Usage, Sd Card Space Usage And Memory Usage. You Can Also Program It To Show Something Else..
Features
- Improvement - PoE Functionality: The adapter board was turned to reroute all those ports into a full-functioning Power Over Ethernet HAT, and it s compatible with any PoE switches.
- VISIBLE: A 0.91 inch OLED screen, the first line shows the IP address, and he second line loops through three rows: the CPU temp & usage, SD card space usage and memory usage. You can also program it to show something else.
- Re-locate: Remove all of the I/O ports and SD card slot to the front to access easily, and the push-button switch allows you to do a shutdown without having to command it from the OS or unplugging the power cable.
- Effective Cooling: The rerouting boards assembled with a cooling fan, which provides powerful heat dissipation to keep the Rpi from overheating.
- Optional Accessories: SSD Bracket (ASIN: B093GRD7SJ), Blank Cover (ASIN: B091THNKGF). Note: The PoE HAT output is 5V 2.5A, Please be careful not to take on too much load. And it doesn't support QC protocol.
- See more on Amazon...
Brand: UCTRONICS | Manufacturer: UCTRONICS
Warranty: 6 Months
See On Amazon #13
UCTRONICS PoE Splitter Gigabit 5V - Micro USB Power and Ethernet to Raspberry Pi 3B+, Work with Echo Dot, Most Micro USB Security Camera and Tablet - IEEE 802.3af Compliant
Asin: B07CNKX14C | Model: U515902 | PartNumber: U515902
Extend Powerline - Deliver Power To Micro Usb Devices Without Nearby Ac Outlets And Upgrade Them To Poe (Power Over Ethernet) From Up To 400 Feet.
Save Your Time - Plug And Play Compatibility And Quick Seller Response. Note: An 802.3Af Compliant Poe Injector/Switch Is Required To Use This Device (Not Included).
Replace Power Supply - Remove The Need For A Separate Power Supply If The Ethernet Cable Is A Must-Have For Your Micro Usb Devices.
Poe Hat Alternative - Use No Gpio Pins. Compatible With Raspberry Pi Case With Fan Or Add-On Screen. Support Raspberry Pi 3B+ And Previous Models.
Features
- 5V/2.4A & 1000Mbps - Power micro-USB devices via an Ethernet cable, along with gigabit data transfer (which you can put aside if you only need power)
- PoE HAT Alternative - Use no GPIO pins. Compatible with Raspberry Pi case with fan or add-on screen. Support Raspberry Pi 3b+ and previous models
- Extend Powerline - Deliver power to micro USB devices without nearby AC outlets and upgrade them to PoE (Power over Ethernet) from up to 400 feet
- Replace Power Supply - Remove the need for a separate power supply if the Ethernet cable is a must-have for your micro USB devices
- Save Your Time - Plug and play compatibility and quick seller response. NOTE: an 802.3af compliant PoE injector/switch is required to use this device (not included)
- See more on Amazon...
Brand: UCTRONICS | Manufacturer: UCTRONICS
Dimensions: 1.97 x 3.15 x 0.59 inches
See On Amazon #14
UCTRONICS Mac Mini Rack Mount with Side Brackets, 19" 1U Rackmount Supports up to 2 Units of All Mac Mini M2 and M1 Models
Asin: B09YCJ3QLT | Model: U6265 | PartNumber: U6265
Easy To Setup: The Rackmount Is Easy To Assemble. You Just Need To Secure The Two Rear Side Brackets With Thumbscrews, And Then Place Your Mac Mini. The Last Step Is To Fix The Rackmount On The Rack With M6 Screws..
Application: Putting Your Mac Minis In The Rack To Optimize The Workspace, Can Be Used For Mac Mini Server Cluster. Package Includes 1 Mac Mini Rackmount, 2 Side Brackets, 8 Mounting Screws, 4 M4 Thumbscrews And User Guide..
Standard 1U Size: 19"×1.75"(482.6×44.5Mm), Fully Compatible With 19” Server Racks, Has No Issue Mounting This Into The 1U Rack Space..
Upgrade Design: This Version Of The 1U Rack Is An Upgraded Version Of B09fj6kr5g. The Rack Mount Can Handle The Weight Better Than The Previous One. Two Side Brackets Are Added For You To Fix The Mac Mini Rackmount Into The 19" Rack Better. And The Length Can Be Adjusted, From Min 9.88 Inch To Max 16.8 Inch. Also, The Rear Side Of The Bracket Is Secured With A Metal Side Instead Of Zip Ties..
Features
- This 1U rackmount is specifically designed to house 2 Mac Minis, compatible with all models M1 and the older unibody ones.
- Upgrade design: This version of the 1U rack is an upgraded version of B09FJ6KR5G. The rack mount can handle the weight better than the previous one. Two side brackets are added for you to fix the mac mini rackmount into the 19 Rack better. And the length can be adjusted, from min 9.88 inch to max 16.8 inch. Also, the rear side of the bracket is secured with a metal side instead of zip ties.
- Easy to setup: The rackmount is easy to assemble. You just need to secure the two rear side brackets with thumbscrews, and then place your mac mini. The last step is to fix the rackmount on the rack with M6 screws.
- Standard 1U Size: 19 1.75(482.6 44.5mm), fully compatible with 19 server racks, has no issue mounting this into the 1U rack space.
- Application: Putting your Mac minis in the rack to optimize the workspace, can be used for Mac mini server cluster. Package includes 1 mac mini rackmount, 2 side brackets, 8 mounting screws, 4 M4 thumbscrews and user guide.
- See more on Amazon...
Brand: UCTRONICS | Manufacturer: UCTRONICS
Warranty: 6 Months
See On Amazon #15
UCTRONICS Male to Female GPIO Ribbon Cable 40pin 8inch Breadboard Jumper Wires for Connection Raspberry Pi 3 2 Model B B+ w/ 3.5/5 inch TFT Touch Screen LCD Display
Asin: B07D991KMR | Model: U6033 | PartNumber: U6033
Material: High-Quantity Copper Soft Wire Material For Safe And Durable.
Application: It Can Be Used To Raspberry Pi 3 2 Model B B+ W/ 3.5/ 5 Inch Touch Tft Screen Lcd Display.
Easy Assembly:The Cables Can Be Separated To Form An Assembly Wires To Support Non-Standard Odd-Spaced Headers To Complete Other Tests.
Length: About 20 Cm / 8 Inch.
Features
- Rainbow flat cable: IDC 40pin Male to Female Ribbon Cables Kit flat GPIO Cable
- Length: about 20 cm / 8 inch
- Material: High-quantity copper soft wire material for safe and durable
- Easy assembly:The cables can be separated to form an assembly wires to support non-standard odd-spaced headers to complete other tests
- Application: It can be used to Raspberry Pi 3 2 Model B B+ w/ 3.5/ 5 inch Touch TFT Screen LCD display
- See more on Amazon...
Brand: UCTRONICS | Manufacturer: UCTRONICS
See On Amazon #16
UCTRONICS Upgraded Complete Enclosure for Raspberry Pi Cluster, Compatible with Pi 5, 4B, 3B+/3B, and Other B Models, House Up to 4 2.5" SSD, Support PoE/PoE+ HAT and Switch, 2 Cooling Fans
Asin: B09S11Q684 | Model: U6260 | PartNumber: U6260
【Front Removable】 Each Baseplate Is Independent So As To Easily Slide In-And-Out, Just Fixed With Captive Loose-Off Screws, Allowing You Very Convenient And Quick Access To Each Node Within The Cluster For Maintenance..
【Applications】This Is The Perfect Solution For Building Pi Array, Pi Nas, Pi Lan Lab Or Other Projects Need To Organize Your Raspberry Pis In A Manageable Way..
【Front Removable】 Each Baseplate Is Independent So As To Easily Slide In-And-Out, Just Fixed With Captive Loose-Off Screws, Allowing You Very Convenient And Quick Access To Each Node Within The Cluster For Maintenance..
【Wide Compatibility】 Designed To House 4×Raspberry Pi 4B, 3B+/3B, Or Other B Models, 4×2.5” Ssds And Ethernet Switch In A Cluster Case. You Can Use It As A Complete Desktop Nas. It Also Has Holes Reserved For The Sd Card Extension Adapter (Asin: B09ckrdfth) Which Allows You To Access The Sd Card From The Front Of The Case. Please Note That The Thickness Of A 2.5" Ssd Cannot Exceed 7Mm..
Features
- Improvement Upgraded from our previous UCTRONICS for Raspberry Pi cluster case U6243 ASIN:B09JNHKL2N . Now you can power your fans while using PoE HAT. Compatible with Raspberry Pi official PoE+ HAT and UCTRONICS mini PoE HAT(ASIN:B082ZLDMZ6). Also We replaced the thumbscrews with captive loose-off screws on the mounting brackets, which greatly improves the stability of the brackets. The front and back panel openings are expanded to support more models of switches.
- Wide compatibility Designed to house 4 Raspberry Pi 4B, 3B+/3B, or other B models, 4 2.5 SSDs and Ethernet switch in a cluster case. You can use it as a complete desktop NAS. It also has holes reserved for the SD card extension adapter (ASIN: B09CKRDFTH) which allows you to access the SD card from the front of the case. Please note that the thickness of a 2.5 SSD cannot exceed 7mm.
- Front Removable Each baseplate is independent so as to easily slide in-and-out, just fixed with captive loose-off screws, allowing you very convenient and quick access to each node within the cluster for maintenance.
- Front Removable Each baseplate is independent so as to easily slide in-and-out, just fixed with captive loose-off screws, allowing you very convenient and quick access to each node within the cluster for maintenance.
- Applications This is the perfect solution for building Pi Array, Pi NAS, Pi LAN lab or other projects need to organize your Raspberry Pis in a manageable way.
- See more on Amazon...
Brand: UCTRONICS | Manufacturer: UCTRONICS
Dimensions: 3.11 x 8.82 x 6.54 Inches | Weight: 1.96 pounds
Warranty: 6 months
See On Amazon #17
UCTRONICS DC 12V Time Delay Relay Module for Smart Home, Tachograph, GPS, PLC Control, Industrial Control, Electronic Experiment, Arduino Robot
Asin: B07BT25J52 | Model: U6031 | PartNumber: U6031
Self Protection: Built With Protection Against Reversal Diode, Supports Anti-Reverse Protection. Note: Please Remove The Jumper Cap Of S5 When Controlling Ac Current Or Dc Current Voltages Other Than 12V, Otherwise The Module Will Be Burned Or Will Not Work Properly..
Applications: This Module Works As A Switch With Time Delay On And Off Function, Highly Recommended For Automotive Circuit Modification, And Led Lights, Dc Motors, Pump And Smart Home Control System..
Functions: Supports On Delay And Off Delay Modes, The Delay Time Can Be Adjusted From 0.1S To 1H, The Delay Mode And Delay Time Can Be Set By Shorting Or Opening The Jumper Pins And Rotating The Potentiometer..
Features
- Operating Voltage: DC 12V; Quiescent Current: 5.5mA; Max. Operating Current: 42mA; Max. Load Voltage: terminal NC is DC 30V or AC 250V, terminal NO is DC 28V or AC 125V; Max. Load Current: 10A
- Functions: Supports on delay and off delay modes, the delay time can be adjusted from 0.1s to 1h, the delay mode and delay time can be set by shorting or opening the jumper pins and rotating the potentiometer.
- Self Protection: Built with protection against reversal diode, supports anti-reverse protection. NOTE: Please remove the jumper cap of S5 when controlling AC current or DC current voltages other than 12V, otherwise the module will be burned or will not work properly.
- Applications: This module works as a switch with time delay on and off function, highly recommended for automotive circuit modification, and LED lights, DC motors, pump and smart home control system.
- See more on Amazon...
Brand: UCTRONICS | Manufacturer: UCTRONICS
Weight: 0.04 pounds
See On Amazon #18
UCTRONICS 1U Rack for Raspberry Pi, 19" Rackmount Supports 1-4 Units of All Raspberry Pi 5/4B/3B/B+ Models
Asin: B08F9X528J | Model: U6123 | PartNumber: U6123
Easy To Install: 4 Slots For Raspberry Pi B/B+ Boards, Fixed With Included Screw; 8 Slots For Optional Inserts Like Hdmi, Lan, Usb; The Rack Can Be Vertical Fixed On The Mounting Rail (The Rack Mount Screw Is Not Included)..
Application: A Housing Solution To Optimize The Workspace, Can Be Used For Raspberry Pi Clusters, Video Walls, And So On..
Quality Built: Nice And Sturdy Gauge Of 1.2Mm Carbon Steel Used In Its Creation, Matte Black Powder Coat Finish, Have Nothing Breaking Off, Paint Chips, Sharp Exposed Edges (Plate Corners Are Rounded Off Smooth)..
Standard 1U Size: 19"×1.75"(482.6×44.5Mm), Fully Compatible With 19” Server Racks, Had No Issue Plugging This Into The 1U Rack Space..
Features
- This 19 inch rackmount is specifically designed to house Raspberry Pi 4 B, 3 B/B+ and other B/B+ boards, supports up to 4 units. NOTE: The reserved mounting hole just compatible with keystone jacks, please search for ASIN B08YNHZQ4S to get the HDMI, RJ45, USB 3.0 and blank keystone jacks. Please search for ASIN: B094PP659Q to get the SSD Mounting Plate.
- Standard 1U Size: 19 1.75(482.6 44.5mm), fully compatible with 19 server racks, had no issue plugging this into the 1U rack space.
- Easy to Install: 4 slots for raspberry pi B/B+ boards, fixed with included screw; 8 slots for optional inserts like HDMI, LAN, USB; the rack can be vertical fixed on the mounting rail (the rack mount screw is not included).
- Quality Built: Nice and sturdy gauge of 1.2mm carbon steel used in its creation, matte black powder coat finish, have nothing breaking off, paint chips, sharp exposed edges (plate corners are rounded off smooth).
- Application: A housing solution to optimize the workspace, can be used for Raspberry Pi clusters, video walls, and so on.
- See more on Amazon...
Brand: UCTRONICS | Manufacturer: UCTRONICS
See On Amazon #19
UCTRONICS for Raspberry Pi Zero Ethernet and Power, Micro USB Ethernet/PoE Adapter for Fire TV Stick, Chromecast, Google Mini, and More, IEEE 802.3af Compliant
Asin: B0876N3PMZ
What Is Poe – Deliver Power And Data With A Single Ethernet Cable For Fewer Wall Plugs And Messed Cables. Extend Powerline To Where No Ac Outlets Are Nearby, Up To 300 Feet Away From The Power Source..
Note: 1. For Raspberry Pi Zero, Plug Into The Micro Usb Port Marked “Usb” Instead Of “Pwr.” 2. Make Sure The Poe Input Is Connected To A Functioning Ieee802.3Af Compliant Poe Switch That Has Internet Connectivity And Power Over Ethernet On Poe Mode. 3. It Can't Be Compatible With Android Phones And Ipad..
What Else Needed - You Need An Ieee 802.3Af Compliant Poe Switch Or Injector For The Poe Mode, Or An Extra Micro-Usb Power Supply For Plain Ethernet Combining..
How Does It Work – By Converting Poe (Power Over Ethernet) Signal, Or Combining Plain Ethernet And Micro-Usb Power Supply, Into Power&Ethernet Over Usb..
Features
- What is it An adapter that helps you deliver both power supply and solid wired network connection to a single Micro-USB port.
- How does it work By converting PoE (Power over Ethernet) signal, or combining plain Ethernet and Micro-USB power supply, into Power&Ethernet over USB.
- What is PoE Deliver power and data with a single Ethernet cable for fewer wall plugs and messed cables. Extend powerline to where no AC outlets are nearby, up to 300 feet away from the power source.
- What else needed - You need an IEEE 802.3af compliant PoE switch or injector for the PoE mode, or an extra Micro-USB power supply for plain Ethernet combining.
- Note: 1. For Raspberry Pi Zero, plug into the micro USB port marked USB instead of PWR. 2. Make sure the PoE input is connected to a functioning IEEE802.3af compliant PoE switch that has internet connectivity and power over Ethernet on PoE mode. 3. It can't be compatible with android phones and ipad.
- See more on Amazon...
Brand: UCTRONICS | Manufacturer: UCTRONICS
See On Amazon #20
UCTRONICS Electronic USB Load Tester, Adjustable Discharge Resistor Module 35W, Test and Trigger QC2.0 QC3.0 AFC 9V FCP, Intelligent Temperature Control with Cooling Fan
Asin: B07SPJFJFJ
Rated Operational Voltage: Dc 4.0-25.0V; Max Discharging Power: 35W; Rated Operational Current: 0.03-5.00A.
Applications: Electronic Load; Test Charger, Charging Cable, Power Bank And Other Device; Equipment Aging Test..
Safe Protection: Anti-Reverse Protection, Overvoltage Protection (Ovp), Overcurrent Protection (Ocp), Over-Power Protection (Opp), Low-Voltage Protection (Lvp), Over-Temperature Protection (Otp)..
Connection Ports: Usb, Micro Usb, Type C And External Wiring Port..
Features
- Multifunction: Not only an electronic load, but also can test the QC2.0/QC3.0/AFC/FCP fast charge protocol, trigger output 5v/9v/12v/20v
- Connection Ports: USB, Micro USB, Type C and external wiring port.
- Rated Operational Voltage: DC 4.0-25.0V; Max discharging power: 35W; Rated operational current: 0.03-5.00A
- Safe Protection: anti-reverse protection, overvoltage protection (OVP), overcurrent protection (OCP), over-power protection (OPP), low-voltage protection (LVP), over-temperature protection (OTP).
- Applications: electronic load; test charger, charging cable, power bank and other device; equipment aging test.
- See more on Amazon...
Brand: UCTRONICS | Manufacturer: UCTRONICS
See On Amazon #21
UCTRONICS for Raspberry Pi Cluster Case, Desktop Metal Rack Case, 4 Layers with 2 Cooling Fans Compatible with Raspberry Pi 5/4B and 2.5" SSD
Asin: B0B3WTQSGL
Made Of Metal Aluminum, Size: 4.13*4.84*7.12Inch; The Case Is Strong And Durable, Compact And Lightweight. So You Can Easily Place It Anywhere On Your Desk. An Sd Card Slot Is Reserved In The Mounting Bracket, Which Can Be Accessed From The Front Of The Case Using An Sd Card Adapter (Asin: B09ckrdfth). 4 Additional Screw Holes On The Top Of The Enclosure For Stacking..
Applications: This Pi Cluster Case Solution Helps You Handle Heavy Loads And Build Small Clusters; It Also Makes It Easy To Manage Your Pi And Cables, Beautifying Your Workbench For A Neater And Tidier..
Easy To Install: The Case Is Not Pre-Assembled And Requires Simple Installation Once You Get It In Your Hands. Each Mounting Plate Uses M4 Hand Screws, Making It Easy To Remove And Install One Of The Units Without A Screwdriver..
Side Opening Design: You Can Easily Position The Pi Hdmi, Audio, And Power Supply. Each Layer Is 40Mm/4.57Inch High, There Is Enough Space For You To Install 4 Mini Poe Hats And Official Poe+Hat..
Features
- For All Raspberry Pi B Models: The metal enclosure is designed for Raspberry Pi and is compatible with Raspberry Pi 4B+/3B/3B+/2B/B+; Supporting up to 4 2.5" SSDs (7mm thickness) and 4 Pi installations; it allows you to add additional storage to your Pi whenever and wherever you want, making it easy to build Pi clusters and Pi NAS servers. Please note that the thickness of a 2.5" SSD cannot exceed 7mm.
- Side Opening Design: you can easily position the Pi HDMI, audio, and power supply. Each layer is 40mm/4.57inch high, there is enough space for you to install 4 mini PoE hats and official PoE+hat.
- Made of metal aluminum, Size: 4.13*4.84*7.12inch; the case is strong and durable, compact and lightweight. So you can easily place it anywhere on your desk. An SD card slot is reserved in the mounting bracket, which can be accessed from the front of the case using an SD card adapter (Asin: B09CKRDFTH). 4 additional screw holes on the top of the enclosure for stacking.
- Easy to install: The case is not pre-assembled and requires simple installation once you get it in your hands. Each mounting plate uses M4 hand screws, making it easy to remove and install one of the units without a screwdriver.
- Applications: This Pi cluster case solution helps you handle heavy loads and build small clusters; it also makes it easy to manage your Pi and cables, beautifying your workbench for a neater and tidier.
- See more on Amazon...
Brand: UCTRONICS | Manufacturer: UCTRONICS
Warranty: 6 Months
See On Amazon #22
UCTRONICS for Raspberry Pi PoE Splitter 5V [2-Pack] - Active PoE to Micro USB Adapter, IEEE 802.3af Compliant, for Tablets, Dropcam and Raspberry Pi 2/3, and More
Asin: B07QPRVM51
What’S Special About It - Poe To Micro Usb. That Means It Adds Plug-And-Play Poe Support To Raspberry Pi Models Even They Are Not 3 B+ And Cannot Accommodate A Raspberry Pi Poe Hat. It Makes Full Use Of Poe Switches Because The Other End Of The Poe Port Could Be Any Micro Usb Devices Instead Of A 48V Poe Network Device.
Note - 1: Just Put The Split Ethernet Aside If You Don’T Need The Data. 2: For One Pack, Check B01mdluse7; For Gigabit Poe Switch Or A Raspberry Pi 3 B+, Check Gigabit Poe Splitter B07cnkx14c; For 12V Barrel Port, Check B01mpww2uv. 3: The Split Ethernet Cable Does Not Carry Power, But You Can Add A Usb Ethernet Adapter To It If Your Device Takes Network From Usb.
What Else Is Needed - You Need An Ieee 802.3Af Compliant Poe Switch Or Injector To Serve As The Pse (Power Source Equipment,) An Ethernet Cable With The Proper Length You Need, And Devices Powered Via Micro Usb. These Are Not Included In Our Package.
What Is Poe - Poe Enables You To Deliver Power And Data With A Single Ethernet Cable, And Thus Fewer Wall Plugs Are Needed And Fewer Cables Are Messed. It Also Helps You Extend Powerline To Where There Are No Ac Outlets Nearby But Your Ethernet Cable Can Reach, Up To 300 Feet Away From The Power Source.
Features
- What is it - A 5v UCTRONICS PoE splitter to split the PoE signal into micro USB power supply and Ethernet in RJ45, so that non-PoE devices can be powered over Ethernet. Reportedly used on micro USB devices like Raspberry Pi, Amazon Ethernet Adapter for Fire TV, Amazon Cloud Cam, Echo Dot (2nd Gen), Wyze Cam v2, Arlo 2 Pro, ASUS Tinker Board, Nano Pi, Chromecast, and so on
- What is PoE - PoE enables you to deliver power and data with a single Ethernet cable, and thus fewer wall plugs are needed and fewer cables are messed. It also helps you extend powerline to where there are no AC outlets nearby but your Ethernet cable can reach, up to 300 feet away from the power source
- What s special about it - PoE to Micro USB. That means it adds plug-and-play PoE support to Raspberry Pi models even they are not 3 B+ and cannot accommodate a Raspberry Pi PoE HAT. It makes full use of PoE switches because the other end of the PoE port could be any micro USB devices instead of a 48V PoE network device
- What else is needed - You need an IEEE 802.3af compliant PoE switch or injector to serve as the PSE (Power Source Equipment,) an Ethernet cable with the proper length you need, and devices powered via micro USB. These are not included in our package
- Note - 1: Just put the split Ethernet aside if you don t need the data. 2: For one pack, check B01MDLUSE7; For gigabit PoE switch or a Raspberry Pi 3 B+, check Gigabit PoE splitter B07CNKX14C; For 12V barrel port, check B01MPWW2UV. 3: The Split Ethernet cable does not carry power, but you can add a USB Ethernet adapter to it if your device takes network from USB
- See more on Amazon...
Brand: UCTRONICS | Manufacturer: UCTRONICS
Dimensions: 0.94 x 6.69 x 4.72 inches
See On Amazon #23
UCTRONICS PoE HAT for Raspberry Pi 4B, IEEE 802.3af-Compliant, 5V 2.5A Mini Power Over Ethernet Expansion Board for Raspberry Pi 4 B 3 B+
Asin: B09M8L925T
Output Power: Dc 5V (2.5A Max); Total Power Budget: 12.5W; Ieee 802.3Af Compliant.
Well-Ventilated Environment Recommended: It’S Normal To Become Hot When The Hat Operates. Please Make Sure The Adequate Air Circulation To Help It Dissipate Heat To Ensure Stable Operation..
Mini-Size: Nearly Half The Official Size, Does Not Occupy The Gpio Pins Of Pi, Saving More Space For Your Other Hardware, While Still Being Able To Be Housed In Most Pi Cases..
Designed For Rpi 4 And 3 B+: This Poe Hat Can Be Used To Deliver Clean And Reliable Power To The Pi 3 Model B+ And Pi 4 Model B (Not Included)..
Features
- Improvement: Based on the original U6109, we have improved the device compatibility to be compatible with more brands of switches; also compatible with non-standard 48v power supply (only through 45+, 78-); PoE input 40-57V with multiple protection circuits.
- Designed For RPi 4 and 3 B+: This PoE HAT can be used to deliver clean and reliable power to the pi 3 model B+ and pi 4 model B (not included).
- Output Power: DC 5V (2.5A Max); Total Power Budget: 12.5W; IEEE 802.3af Compliant
- Mini-Size: Nearly half the official size, does not occupy the GPIO pins of Pi, saving more space for your other hardware, while still being able to be housed in most Pi cases.
- Well-ventilated Environment Recommended: It s normal to become hot when the HAT operates. Please make sure the adequate air circulation to help it dissipate heat to ensure stable operation.
- See more on Amazon...
Brand: UCTRONICS | Manufacturer: UCTRONICS
Warranty: 6 Months
See On Amazon #24
UCTRONICS Upgraded Complete Enclosure for Raspberry Pi Cluster, with 4 Removable Mounting Brackets for Pi 5, 4B, 3B+/3B, and Other B Model and 2 Cooling Fans,Support 4 2.5" SSD and Switch
Asin: B09JNHKL2N | Model: U6243 | PartNumber: U6243
【Quality Built】Made Of Full Metal Material，Black Powder Coat Finish, Have Nothing Breaking Off, Paint Chips, Sharp Exposed Edges (Plate Corners Are Rounded Off Smooth)..
【Applications 】This Is The Perfect Solution For Building Pi Array, Pi Nas, Pi Lan Lab Or Other Projects Need To Organize Your Pis In A Manageable Way. If Your Fan Power Pins Of Pi Are Occupied By The Poe Hat, You Can Search Asin: B09tp9ht3c To Check The Fan Adapter To Power Your Fan..
Please Note: The Fan Is Not A Pwm Fan And Does Not Support Speed And Temperature Control..
【Efficient Heat Dissipation 】Efficient Heat Dissipation - Dual 8Cm 5V Cooling Fans Provide Enough Airflow To Keep Your Rpis Cool Quietly, With A Convenient Connector And Free Of Light Pollution, The Fans Also Can Help Circulate The Air In Your Closet If You Locate The Cluster In, So As To Improve The Heat Dissipation Of Other Network Equipment..
【Front Removable】 Each Baseplate Is Independent So As To Easily Slide In-And-Out, Just Fixed With Thumbscrews, Allowing You Very Convenient And Quick Access To Each Node Within The Cluster For Maintenance..
Features
- Improvement In this version, we changed the assembly method based on the previous version(U6184), using frames to connect each side panel. The Complete desktop kit for Raspberry pi 4 Can accommodate 4 RPi boards and 4 2.5 SSDs and an ethernet switch. It has 4 reserved SD card cut that allows you to access the SD card from the front of the rack with an extension board not included . Note: It comes disassembled and needs to be installed briefly before use.
- Front Removable Each baseplate is independent so as to easily slide in-and-out, just fixed with thumbscrews, allowing you very convenient and quick access to each node within the cluster for maintenance.
- Quality Built Made of full metal material black powder coat finish, have nothing breaking off, paint chips, sharp exposed edges (plate corners are rounded off smooth).
- Efficient Heat Dissipation Efficient Heat Dissipation - Dual 8cm 5V cooling fans provide enough airflow to keep your RPis cool quietly, with a convenient connector and free of light pollution, the fans also can help circulate the air in your closet if you locate the cluster in, so as to improve the heat dissipation of other network equipment.
- Applications This is the perfect solution for building Pi Array, Pi NAS, Pi LAN lab or other projects need to organize your Pis in a manageable way. If your fan power pins of Pi are occupied by the PoE hat, you can search ASIN: B09TP9HT3C to check the fan adapter to power your fan.
- Please note: The fan is not a PWM fan and does not support speed and temperature control.
- See more on Amazon...
Brand: UCTRONICS | Manufacturer: UCTRONICS
Weight: 2.29 Pounds
Warranty: 6 Months
See On Amazon #25
UCTRONICS for Raspberry Pi DIN Rail Mount, Compatible with Arduino, RPi 5/4B/3B+/3B/2B/B+, Pi Zero, Raspberry Pi Pico
Asin: B098K314KH
Recommended For Creating An Array Of Raspberry Servers, Home Lab And Other Industrial Projects, Make It Very Professional And Easy To Maintain When Needed..
You'll Be Getting A Mounting Bracket, 2 Din Rail Clips, And Standoffs, And Screws..
Has No Hassle To Mount In The 19" Rack With Uctronics Din Rail Rack Mount, Please Search For Asin B09823n6fy To Get It..
The Mounting Bracket Is Made Of 1.2Mm Carbon Steel, Attaches To Both The Sbc And The Din Rail Sturdily, Multiple Optional Mounting Holes Help You Mount The Different Boards And The Din Rail Clips In Both Horizontal And Vertical Way..
Features
- A DIN option to provide a wide range of flexibility in mounting for multiple SBC devices, such as Raspberry Pi 5, 4, 3 B/B+ and all other A, B, and Zero Models, Raspberry Pi Pico, Arduino Uno/Mega 2560, BeagleBone series.
- The mounting bracket is made of 1.2mm carbon steel, attaches to both the SBC and the DIN rail sturdily, multiple optional mounting holes help you mount the different boards and the DIN rail clips in both horizontal and vertical way.
- Recommended for creating an array of Raspberry servers, home lab and other industrial projects, make it very professional and easy to maintain when needed.
- Has no hassle to mount in the 19 rack with UCTRONICS DIN rail rack mount, please search for ASIN B09823N6FY to get it.
- You'll be getting a mounting bracket, 2 DIN rail clips, and standoffs, and screws.
- See more on Amazon...
Brand: UCTRONICS | Manufacturer: UCTRONICS
Warranty: 6 Months
See On Amazon #26
UCTRONICS GPIO Breakout Kit for Raspberry Pi Pico- Assembled Pi T- Type Breakout + 830 Tie Points Solderless Breadboard + 40 Pin Male - Female - Male Rainbow Ribbon Cable + 65pcs Jump Wires
Asin: B07DL25MVQ | Model: U6040 | PartNumber: U6040
Compatibility: You Can Connect All Version Raspberry Of The Board To Various Sensors And Electronic Components With The Gpio Extension Board.
Detailed Instructions, Worry-Free Warranty, Strong Technical Support & Great Customer Service.
Package: A T-Type Expansion Board, 830 Tie Points Solderless Breadboard, 40 Pin Male To Female To Male Rainbow Cable And 65Pcs Breadboard Jump Wires.
Convenient: Breadboard And T-Type Expansion Board Make The Experiment More Convenient.
Features
- Application: Suitable for Projects with Raspberry Pi 4 3 2 Model B B+ A+ A, zero W, and Raspberry Pi zero
- Convenient: Breadboard and T-type expansion board make the experiment more convenient
- Compatibility: You can connect all version raspberry of the board to various sensors and electronic components with the GPIO extension board
- Package: A T-type expansion board, 830 Tie Points Solderless breadboard, 40 pin male to female to male Rainbow Cable and 65pcs breadboard jump wires
- Detailed instructions, worry-free warranty, strong technical support & great customer service
- See more on Amazon...
Brand: UCTRONICS | Manufacturer: UCTRONICS
See On Amazon #27
UCTRONICS Desktop Cluster Enclosure for Raspberry Pi, Up to 4 PIS and 2.5" SSD, Front Removable Trays, 12cm LED Cooling Fan for Raspberry Pi 5/4B/3B+/3B
Asin: B0B57XMZ9F
With A 12Cm Led Fan, Silent, Beautiful, And Able To Provide Sufficient Cooling For 4 Pis. Note: This Fan Is Not A Pwm Fan, Can Not Control The Air Speed And Temperature..
The Mounting Plate Also Has A Reserved Sd Card Slot, So You Can Access And Replace The Sd Card From The Front Side Simply By Using The Sd Card Adapter(Asin: B09ckrdfth)..
Front Pull-Out, Easy To Replace One Of Unit, Easy Access To The Rpi's I/O Ports And Sd Card..
Hassle-Free Installation Of 2.5" Ssd, Add Your Additional Storage Anytime, Anywhere. Please Note That The Thickness Of A 2.5" Ssd Cannot Exceed 7Mm..
Features
- Not only compatible with Raspberry Pi 4B and 3B, all Pi B-type boards are compatible.
- Hassle-free installation of 2.5 ssd, add your additional storage anytime, anywhere. Please note that the thickness of a 2.5 SSD cannot exceed 7mm.
- With a 12cm LED fan, silent, beautiful, and able to provide sufficient cooling for 4 Pis. Note: This fan is not a PWM fan, can not control the air speed and temperature.
- Front pull-out, easy to replace one of unit, easy access to the RPi's I/O ports and SD card.
- The mounting plate also has a reserved SD card slot, so you can access and replace the SD card from the front side simply by using the SD card adapter(ASIN: B09CKRDFTH).
- See more on Amazon...
Brand: UCTRONICS | Manufacturer: UCTRONICS
Weight: 2.79 pounds
Warranty: 6 Months
See On Amazon #28
UCTRONICS NUC Rack Mount, 19" 1U Rackmount Supports 3 Units of Low Model NUC
Asin: B09BJ5WBHB | Model: U6186 | PartNumber: U6186
Reserved Cuts: 3 Slots For Optional Keystone Jacks, You Can Search For Asin B08ymzr666, B08ynhzq4s, B098wpv8t8 And B0991tymy3 To Get The Hdmi, Rj45, Usb 3.0 And Blank Keystone Jacks..
Quality Built: Nice And Sturdy Gauge Of 1.2Mm Carbon Steel Used In Its Creation, Matte Black Powder Coat Finish, Have Nothing Breaking Off, Paint Chips, Sharp Exposed Edges (Plate Corners Are Rounded Off Smooth)..
Application: Putting Your Nucs In The Rack To Optimize The Workspace, Can Be Used For Nuc Server Cluster, Homelabs..
Standard 1U Size: 19"×1.75"(482.6×44.5Mm), Fully Compatible With 19” Server Racks, Has No Issue Mounting This Into The 1U Rack Space..
Easy To Install: Unscrew The Bottom Screw Of Nuc, Let The Included Screw Go Through The Standoff And Fix Nuc On The Rackmount; The Rack Can Be Vertical Fixed On The Mounting Rail..
Features
- This 1U rackmount is specifically designed to house 3 low model Intel NUCs, compatible with NUC 8 Bean Canyon and Provo Canyon, NUC 10 Frost Canyon, NUC 11 Panther Canyon and Tiger Canyon.
- Easy to Install: Unscrew the bottom screw of NUC, let the included screw go through the standoff and fix NUC on the rackmount; the rack can be vertical fixed on the mounting rail.
- Reserved Cuts: 3 slots for optional keystone jacks, you can search for ASIN B08YMZR666, B08YNHZQ4S, B098WPV8T8 and B0991TYMY3 to get the HDMI, RJ45, USB 3.0 and blank keystone jacks.
- Standard 1U Size: 19 1.75(482.6 44.5mm), fully compatible with 19 server racks, has no issue mounting this into the 1U rack space.
- Quality Built: Nice and sturdy gauge of 1.2mm carbon steel used in its creation, matte black powder coat finish, have nothing breaking off, paint chips, sharp exposed edges (plate corners are rounded off smooth).
- Application: Putting your NUCs in the rack to optimize the workspace, can be used for NUC server cluster, homelabs.
- See more on Amazon...
Brand: UCTRONICS | Manufacturer: UCTRONICS
Warranty: 6 Months
See On Amazon #29
UCTRONICS for Raspberry Pi Pico Starter Kit for Official Starter Book (Get Started with MicroPython on Raspberry Pi Pico), Pre-soldered Pico, Beginner Friendly
Asin: B08XBTLH4R | Model: KB0005 | PartNumber: KB0005
More Expansion: With The Tiny, Fast, And Versatile Board Built With Rp2040, You Can Also Connect To Motors, Imu Or Other Components Based On A Special Driver (Not Included), Finish Getting Started With C/C++ Tutorial, And Integrate It Into End Products..
Note: The Lcd Display Included In The Kit Is Slightly Different From What's Been Used In The Book, So Please Refer To The Wiring Contained In The Manual And The Online Code Instead..
Application: A High Cost Performance Kit Gets You Started In Learning The Robotics, Programming And Electronics Easily; The Decent Package Helps It Become A Smart Choice Of A Present..
Features
- Why is the kit a must-have? This kit is designed to be used alongside the free Official book, It includes every component you need to get started with the book and you won t have to run out to the store for anything extra.
- Application: A high cost performance kit gets you started in learning the robotics, programming and electronics easily; The decent package helps it become a smart choice of a present.
- More Expansion: With the tiny, fast, and versatile board built with RP2040, you can also connect to motors, IMU or other components based on a special driver (not included), finish getting started with C/C++ tutorial, and integrate it into end products.
- NOTE: The LCD display included in the kit is slightly different from what's been used in the book, so please refer to the wiring contained in the manual and the online code instead.
- See more on Amazon...
Brand: UCTRONICS | Manufacturer: UCTRONICS
See On Amazon #30
UCTRONICS for Raspberry Pi SSD Case, Pi NAS Metal Vertical Stand for Dual 2.5 SSDs and Pi 5, 4, 3B/3B+ and Other B Models
Asin: B093GR4M7V | Model: U6158 | PartNumber: U6158
Quality Built: Nice And Sturdy Gauge Of Carbon Steel Used In Its Creation, Matte Black Powder Coat Finish, Have Nothing Breaking Off, Paint Chips, Sharp Exposed Edges (Plate Corners Are Rounded Off Smooth)..
Note: The Sata To Usb Adapters Are Not Included, Please Search For Asin B094d12zxf To Get The Sata Adapter As You Need..
Applications: This Is A Hardware Solution To Get Ingenious Use Of The Pi4, With This Kit And Open Source Software Openmediavault, You Can Use The Pi As A Nas Server, Surveillance Station Or Even A Web Server..
Easy To Setup: Just Insert Your Ssds And Fix Them With The Screws, Mount The Rpi, And Mount To The Base; The Assembly Manual Is Contained In The Package..
Features
- This NAS case kit is specifically designed to get a bigger Network attached storage for Raspberry Pi, compatible with 2.5 SSD (7mm/9mm) and RPi 4B/3B+/3B/2B.
- Easy to Setup: Just insert your SSDs and fix them with the screws, mount the RPi, and mount to the base; The assembly manual is contained in the package.
- Quality Built: Nice and sturdy gauge of carbon steel used in its creation, matte black powder coat finish, have nothing breaking off, paint chips, sharp exposed edges (plate corners are rounded off smooth).
- Applications: This is a hardware solution to get ingenious use of the Pi4, with this kit and open source software OpenMediaVault, you can use the Pi as a NAS Server, Surveillance station or even a Web server.
- NOTE: The SATA to USB adapters are not included, please search for ASIN B094D12ZXF to get the SATA adapter as you need.
- See more on Amazon...
Brand: UCTRONICS | Manufacturer: UCTRONICS
See On Amazon