Wonrabai - Buying Guide
Last Updated: 05/01/2024
Share on
Bestselling from Wonrabai on Amazon
- for Raspberry Pi 5 Official Raspberry Pi 5 Active Cooler, Pi5 Active Cooler Combines Temperature-Con...
- Waveshare POE HAT Board for Raspberry Pi 5, Power Over Ethernet HAT(POE) with Onboard Cooling Fan an...
- Waveshare Serial Bus Servo Driver Board, Integrates Servo Power Supply and Control Circuit, for ST/S...
- Wonrabai FT232 USB UART Board (Type C), USB to TTL Serial Converter Adapter Module Onboard Original ...
- Active Cooler for Raspberry Pi 5, Active Cooling Fan Aluminium Heatsink with Thermal Pads for Raspbe...
- Active Cooler (A) for Raspberry Pi 5, Aluminium Heatsink, Active Cooling Fan, with Thermal Pads
- Wonrabai CSI FPC Flexible Cable for Raspberry Pi 5, 22Pin to 15Pin, 0.5 M Length, Suitable for CSI C...
- WM8960 Hi-Fi Sound Card HAT for Raspberry Pi 5/Pi 4B/3B+/Pi3B/Pi Zero 2W/ Zero W/Zero WH, Support St...
- Waveshare Industrial Grade Serial Server RS232/RS485 to WiFi and Ethernet, Ethernet to WiFi Converte...
- ESP32-S3 Development Board with 1.28inch IPS Round LCD 240x240 Resolution and with CNC Metal Case, 3...
#1
for Raspberry Pi 5 Official Raspberry Pi 5 Active Cooler, Pi5 Active Cooler Combines Temperature-Controlled Blower Fan and Aluminium Heatsink, Comes with Thermal Tapes for Better Heat Dissipation
Asin: B0CW164TCW | Model: for Pi5 | PartNumber: for Pi5
Input Voltage--5V Dc (Supplied Via Four-Pin Fan Header On Raspberry Pi 5).
Note -- Raspberry Pi 5 Board Is Not Included.
How To Install-- Connect The 4Pin Cable To The Fan Header On Raspberry Pi 5, And Fix The Active Cooler Via Spring-Loaded Push Pins.
Composition--The Raspberry Pi 5 Active Cooler Is Composed Of Temperature-Controlled Blower Fan And Aluminium Heatsink And Comes With Thermal Tapes To Accelerate Heat Dissipation.
Features
- Official Raspberry Pi 5 Active Cooler -- This is Official Raspberry Pi Active Cooler for the latest Raspberry Pi 5 4GB/8GB Board
- Composition--The Raspberry Pi 5 Active Cooler is composed of Temperature-controlled Blower Fan and Aluminium Heatsink and comes with Thermal Tapes to accelerate heat dissipation
- Input Voltage--5V DC (supplied via four-pin fan header on Raspberry Pi 5)
- How to Install-- Connect the 4pin cable to the fan header on Raspberry Pi 5, and fix the Active Cooler via spring-loaded push pins
- NOTE -- Raspberry Pi 5 Board is NOT Included
- See more on Amazon...
Brand: Wonrabai | Manufacturer: Wonrabai
Weight: 0.04 Pounds
See On Amazon #2
Waveshare POE HAT Board for Raspberry Pi 5, Power Over Ethernet HAT(POE) with Onboard Cooling Fan and Metal Heatsink, Supports 802.3af/at Network Standard,12V and 5V Power Outputs
Asin: B0CSNS3ZN8
Onboard 5V & 12V Header Outputs: 5V Header Provides Up To 4.5A Output (Max 25W For 12V+5V Total Output Power). Be Able To Power Extra Devices While Providing Stable Power To Raspberry Pi..
Onboard Mp8759gd Buck Chip: Incorporates Original Voltage Buck Chip, Providing Up To 5A Under Sufficient Heat Dissipation Condition..
Onboard With Active Cooling Fan: Accelerate Cooling Effect, More Stable Performance.
By Using This Small Hat And Some Proper 802.3Af/At-Compliant Power Sourcing Equipment, It Is Possible To Provide Both Network Connection And Power Supply For Your Raspberry Pi In Only One Ethernet Cable..
Features
- The PoE HAT (F) is an 802.3af/at-compliant Power Over Ethernet accessory for the Raspberry Pi 5. (Note: Not for PI4B and PI3B). With Standard Pi 40PIN GPIO stackable header, allows connecting other HATs.
- By using this small HAT and some proper 802.3af/at-compliant power sourcing equipment, it is possible to provide both network connection and power supply for your Raspberry Pi in only one Ethernet cable.
- Onboard 5V & 12V header outputs: 5V header provides up to 4.5A output (MAX 25W for 12V+5V total output power). Be able to power extra devices while providing stable power to Raspberry Pi.
- Onboard with Active Cooling fan: Accelerate Cooling Effect, More Stable Performance
- Onboard MP8759GD buck chip: Incorporates original voltage buck chip, providing up to 5A under sufficient heat dissipation condition.
- See more on Amazon...
Brand: Wonrabai | Manufacturer: Wonrabai
Warranty: Small Parts
See On Amazon #3
Waveshare Serial Bus Servo Driver Board, Integrates Servo Power Supply and Control Circuit, for ST/SC Series Serial Bus Servos, Supports 253 ST/SC Series Serial Bus Servos at The Same Time
Asin: B0CTMM4LWK
【Two Power Supply Methods】Onboard Dc5521 Power Jack And Screw Terminal For Easy Integration Into Existing Projects.
【Suitable For More Applications Via Uart】 Supports Directly Controlling The Serial Bus Servo Via Uart Communication, And Provides Sdk Which Is Compatible With Various Hardware Platforms, Please Refer To The Product's Online Wiki For More Details.
【Supports Uart And Usb Control】Switching The Control Mode By Selecting A Or B Via The Jumper. 【Easy To Use With Usb Control】Connect The Driver Board To The Host Via A Usb Cable To Easily Control The Serial Bus Servo And Receive Data Feedback, Speeding Up The Project Prototyping Process.
【Uart Serial Bus Control】Allows Controlling Up To 253 Sc/St Series Serial Bus Servos At The Same Time, Supports Receiving The Operating Status And Various Information Feedback Of Each Servo.
Features
- Compatible Servos Supports ST/SC series bus servos, and can directly power the servos via DC power jack, supports selecting power supply input according to the servo used
- UART serial bus control Allows controlling up to 253 SC/ST series serial bus servos at the same time, supports receiving the operating status and various information feedback of each servo
- Two Power supply methods Onboard DC5521 power jack and screw terminal for easy integration into existing projects
- Supports UART and USB control Switching the control mode by selecting A or B via the jumper. Easy to use with USB control Connect the driver board to the host via a USB cable to easily control the serial bus servo and receive data feedback, speeding up the project prototyping process
- Suitable for more Applications via UART Supports directly controlling the serial bus servo via UART communication, and provides SDK which is compatible with various hardware platforms, please refer to the product's Online Wiki for more details
- See more on Amazon...
Brand: Wonrabai | Manufacturer: Wonrabai
Warranty: Small Parts
See On Amazon #4
Wonrabai FT232 USB UART Board (Type C), USB to TTL Serial Converter Adapter Module Onboard Original FT232RL, Compatible with Mac Linux Android Wince Windows 7/8/8.1/10/11, 5V/3.3V UART (TTL)
Asin: B0CSYVXH8L
Supports Mac, Linux, Android, Wince, Windows 7/8/8.1/10/11....
3 Power Mode : 5V Output, 3.3V Output, Or Powered By Target Board (3.3V-5V).
3 Leds: Txd Led, Rxd Led, Power Led.
Original Ft232rl Onboard.
Features
- FT232 USB UART Board (Type C) , USB To TTL (UART) Communication Module
- Original FT232RL onboard
- Supports Mac, Linux, Android, WinCE, Windows 7/8/8.1/10/11...
- 3 LEDs: TXD LED, RXD LED, POWER LED
- 3 power mode : 5V output, 3.3V output, or powered by target board (3.3V-5V)
- See more on Amazon...
Brand: Wonrabai | Manufacturer: Wonrabai
See On Amazon #5
Active Cooler for Raspberry Pi 5, Active Cooling Fan Aluminium Heatsink with Thermal Pads for Raspberry Pi 5 4GB/8GB
Asin: B0CX8WFTGQ | Model: B-Active Cooler for Pi5 | PartNumber: B-Active Cooler for Pi5
✅ Easy To Install: Connect The 4Pin Cable To The Fan Header On Raspberry Pi 5, Attach Thermal Pads And Fix The Active Cooler Via Spring-Loaded Push Pins.
✅ Fan Speed Control: Pulse Width Modulation Control With Tachometer. Fan Speed: 8000±10%Rpm.
✅ Input Voltage: 5V Dc (Supplied Via Four-Pin Fan Header On Raspberry Pi 5).
✅ Combines A Temperature-Controlled Blower Fan With An Aluminium Heatsink To Accelerate Heat Dissipation.
Features
- Compatible with Raspberry Pi 5 ---This Active Cooling Fan, Aluminium Heatsink is only designed for Raspberry Pi 5 4GB/8GB.
- Combines A Temperature-Controlled Blower Fan with an aluminium heatsink to accelerate heat dissipation
- Easy to install: Connect the 4pin cable to the fan header on Raspberry Pi 5, attach thermal pads and fix the Active Cooler Via Spring-Loaded Push Pins
- Input voltage: 5V DC (supplied via four-pin fan header on Raspberry Pi 5)
- Fan speed control: Pulse width modulation control with tachometer. Fan speed: 8000 10%RPM
- See more on Amazon...
Brand: Wonrabai | Manufacturer: Wonrabai
Warranty: Any questions, please feel free to send us Amazon message
See On Amazon #6
Active Cooler (A) for Raspberry Pi 5, Aluminium Heatsink, Active Cooling Fan, with Thermal Pads
Asin: B0CSK5RJ7J | Model: W-C-A | PartNumber: W-C-A
Input Voltage---5V Dc (Supplied Via Four-Pin Fan Header On Raspberry Pi 5).
How To Install---Connect The 4Pin Cable To The Fan Header On Raspberry Pi 5, And Fix The Active Cooler Via M2.5 Nylon Screws.
Fan Speed ---8000±10%Rpm.
Based On Raspberry Pi 5---Matching The Size And Mounting Holes Of The Raspberry Pi 5, Combines An Aluminium Heatsink With An Active Cooling Fan To Accelerate Heat Dissipation.
Features
- Compatible with Raspberry Pi 5 ---This Active Cooling Fan, Aluminium Heatsink is only designed for Raspberry Pi 5 4GB/8GB.
- Based On Raspberry Pi 5---Matching the size and mounting holes of the Raspberry Pi 5, combines an aluminium heatsink with an Active cooling fan to accelerate heat dissipation
- Input voltage---5V DC (supplied via four-pin fan header on Raspberry Pi 5)
- Fan speed ---8000 10%RPM
- How to Install---Connect the 4pin cable to the fan header on Raspberry Pi 5, and fix the Active Cooler via M2.5 Nylon screws
- See more on Amazon...
Brand: Wonrabai | Manufacturer: Wonrabai
See On Amazon #7
Wonrabai CSI FPC Flexible Cable for Raspberry Pi 5, 22Pin to 15Pin, 0.5 M Length, Suitable for CSI Camera Modules, Connecting CSI Camera Module to Raspberry Pi 5 or Compute Module 4
Asin: B0CVS264R1
Emi Shielding, More Stable. Black Emi Shielding Film On Both Sides, Enhancing Anti-Interference Performance. More Stable Signal Transmission.
Suitable For Csi Camera Modules, Connecting Csi Camera Module To Raspberry Pi 5 Or Compute Module 4.
0.5M Length.
Features
- CSI FPC Flexible Cable For Raspberry Pi 5, 22Pin To 15Pin
- 0.5M Length
- EMI shielding, more stable. Black EMI shielding film on both sides, enhancing anti-interference performance. More stable signal transmission
- Suitable For CSI Camera Modules, Connecting CSI Camera Module to Raspberry Pi 5 or Compute Module 4
- See more on Amazon...
Brand: Wonrabai | Manufacturer: Wonrabai
Warranty: Any questions, please feel free to send us Amazon message
See On Amazon #8
WM8960 Hi-Fi Sound Card HAT for Raspberry Pi 5/Pi 4B/3B+/Pi3B/Pi Zero 2W/ Zero W/Zero WH, Support Stereo Encode/Decode, Play/Record, Directly Drives Speakers to Play Music
Asin: B0CSPMSWWL
Onboard Standard 3.5Mm Earphone Jack, Play Music Via External Earphone.
Supports Sound Effects Such As Stereo, 3D Surrounding, Etc..
Onboard Dual-Channel Speaker Interface, Directly Drives Speakers.
Integrates Wm8960 Low Power Stereo Codec, Communicates Via I2s Interface. Integrates Dual High-Quality Mems Silicon Mic, Supports Left & Right Double Channels Recording, Nice Sound Quality..
Features
- This is a sound card HAT designed for Raspberry Pi, has low power consumption, supports stereo encoding/decoding, features Hi-Fi playing/recording. What's more, it can directly drive speakers to play music.
- Integrates WM8960 low power stereo CODEC, communicates via I2S interface. Integrates dual high-quality MEMS silicon Mic, supports left & right double channels recording, nice sound quality.
- Onboard standard 3.5mm earphone jack, play music via external earphone
- Onboard dual-channel speaker interface, directly drives speakers
- Supports sound effects such as stereo, 3D surrounding, etc.
- See more on Amazon...
Brand: Wonrabai | Manufacturer: Wonrabai
Warranty: Small Parts
See On Amazon #9
Waveshare Industrial Grade Serial Server RS232/RS485 to WiFi and Ethernet, Ethernet to WiFi Converter with Metal Case, Modbus Gateway/MQTT Gateway, Support Wail-Mount and Rail-Mount DC 6~36V
Asin: B0CTG713NN
【Support Multi Wireless Networking Methods】Support Ap Mode, Sta Mode, And Ap+Sta Mode. 【Support Multi Wired Networking Methods】Support Aplan, Apwan, Router, And Bridge Mode..
【Applications】It Is Suitable For Applications Like Data Acquisition, Iot Gateway, Safety & Security Iot, And Intelligent Instrument Monitoring,Etc..
【Power Supply Methods】Support Screw Terminal And Dc 5.5 Power Port For Power Supply, Dc 6~36V Wide Voltage Range Input. 【Support Transparent Transmission Mode】Support Tcp Server, Tcp Client, Udp Server, Udp Client.
【Ethernet Port And Wifi To Rs232 / 485】The Module Can Realize Functions Such As Serial Port To Wifi, Serial Port To Ethernet, Ethernet To Wifi And So On. Ethernet Port And Wifi To Rs232 / 485: The Ethernet Port And Wifi Can Send Data To The Two Serial Ports At The Same Time. 【Rs232 / 485 To Ethernet Port And Wifi 】Only One Of The Rs232 And Rs485 Can Send Data To The Ethernet Port And Wifi At The Same Time.
Features
- This is an RS232/485 device data acquisitor / IoT gateway designed for industrial environment. It combines multi functions in one, including serial server, Modbus gateway, MQTT gateway, serial port to HTTPD Client, etc. Industrial grade metal case design, supports wall-mount and rail-mount installations, small in size, easy to install.
- Ethernet Port and WiFi to RS232 / 485 The module can realize functions such as serial port to WIFI, serial port to Ethernet, Ethernet to WIFI and so on. Ethernet Port and WiFi To RS232 / 485: The Ethernet port and WiFi can send data to the two serial ports at the same time. RS232 / 485 to Ethernet Port and WiFi Only one of the RS232 and RS485 can send data to the Ethernet port and WiFi at the same time
- Support multi wireless networking methods Support AP mode, STA mode, and AP+STA mode. Support multi wired networking methods Support APLAN, APWAN, Router, and Bridge mode.
- Power Supply Methods Support Screw Terminal and DC 5.5 Power Port for Power Supply, DC 6~36V Wide Voltage Range Input. Support transparent transmission mode Support TCP Server, TCP Client, UDP Server, UDP Client
- Applications It is suitable for applications like data acquisition, IoT gateway, safety & security IoT, and intelligent instrument monitoring,etc.
- See more on Amazon...
Brand: Wonrabai | Manufacturer: Wonrabai
Warranty: Small Parts
See On Amazon #10
ESP32-S3 Development Board with 1.28inch IPS Round LCD 240x240 Resolution and with CNC Metal Case, 32-bit LX7 Dual-Core Processor, Integrates GC9A01 Display Driver Chip, Supports WiFi/Bluetooth
Asin: B0CZ8FGFZW
✅ Built In 512Kb Of Sram And 384Kb Rom, With Onboard 2Mb Psram And An External 16Mb Flash Memory..
✅ Supports Flexible Clock, Module Power Supply Independent Setting, And Other Controls To Realize Low Power Consumption In Different Scenarios. Integrated With Usb Serial Port Full-Speed Controller, Gpio Pins Allow Flexibly Configuring Pin Functions..
✅ Onboard 1.28Inch Lcd Display, Round Ips Panel, 240×240 Resolution, 65K Color. Onboard Qmi8658 6-Axis Imu (3-Axis Accelerometer And 3-Axis Gyroscope) For Detecting Motion Gesture. Onboard 3.7V Li Batter Recharge/Discharge Header And Gpio Headers..
✅ Equipped With Xtensa 32-Bit Lx7 Dual-Core Processor, Up To 240Mhz Main Frequency. Supports 2.4Ghz Wi-Fi (802.11 B/G/N) And Bluetooth 5 (Ble), With Onboard Antenna..
Features
- ESP32-S3-LCD-1.28-B is a low-cost, high-performance MCU board designed by Waveshare, with onboard 1.28inch LCD display, Li batter recharge manager, 6-axis sensor (3-axis accelerometer and 3-axis gyroscope), and so on, which makes it easy for you to develop and integrate it into products quickly. Adopts CNC metal case with Acrylic dull-polish bottom plate.
- Equipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (BLE), with onboard antenna.
- Built in 512KB of SRAM and 384KB ROM, with onboard 2MB PSRAM and an external 16MB Flash memory.
- Onboard 1.28inch LCD display, round IPS panel, 240 240 resolution, 65K color. Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gesture. Onboard 3.7V Li batter recharge/discharge header and GPIO headers.
- Supports flexible clock, module power supply independent setting, and other controls to realize low power consumption in different scenarios. Integrated with USB serial port full-speed controller, GPIO pins allow flexibly configuring pin functions.
- See more on Amazon...
Brand: Wonrabai | Manufacturer: Wonrabai
Warranty: Any questions, please feel free to send us Amazon message
See On Amazon #11
ESP32-C6 Mini Development Board Based on ESP32-C6FH4 Dual Processors 160MHz Support 2.4GHz WiFi 6 & Bluetooth 5 USB Type-C Port 22 x GPIO pins
Asin: B0CZDW5F6Q
Esp32-C6 Integrates 2.4 Ghz Wi-Fi 6 (802.11 Ax/B/G/N) With 40 Mhz Of Bandwidth Support, Its Bluetooth Low Energy Subsystem Supports Bluetooth 5 (Le) And Bluetooth Mesh.
Esp32-C6 Suitable For Aiot Applications--Powered By A High-Performance 32-Bit Risc-V Processor And A Low-Power 32-Bit Risc-V Processor, The Main Frequency Is Up To 160 Mhz, Powerful Ai Computing Capability & Reliable Security Features.
Onboard Usb Type-C Port, 22 × Gpio Pins Allows Flexibly Configuring Pin Functions.
Built In 320Kb Rom, 512Kb Of Hp Sram, 16Kb Lp Sram And 4Mb Flash Memory.
Features
- ESP32-C6 Mini Development Board, Based on ESP32-C6FH4, Equipped with a high-performance 32-bit RISC-V processor with clock speed up to 160 MHz, and a low-power 32-bit RISC-V processor with clock speed up to 20MHz
- Built in 320KB ROM, 512KB of HP SRAM, 16KB LP SRAM and 4MB Flash memory
- ESP32-C6 integrates 2.4 GHz Wi-Fi 6 (802.11 ax/b/g/n) with 40 MHz of bandwidth support, Its Bluetooth Low Energy subsystem supports Bluetooth 5 (LE) and Bluetooth Mesh
- Onboard USB Type-C port, 22 GPIO pins allows flexibly configuring pin functions
- ESP32-C6 suitable for AIoT applications--Powered by a high-performance 32-bit RISC-V processor and a low-power 32-bit RISC-V processor, the main frequency is up to 160 MHz, Powerful AI Computing Capability & Reliable security features
- See more on Amazon...
Brand: Wonrabai | Manufacturer: Wonrabai
Warranty: Any questions, please feel free to send us Amazon message
See On Amazon #12
RS232 to RS485/422 Active Digital Isolated Converter Adapter, Original SP3232EEN and SP485EEN Chips, Transmission Distance up to 1.2km, Wall-Mount and Rail-Mount Support, RS232 DB9 Male Port
Asin: B0CWYZ8RRC
Onboard Tvs (Transient Voltage Suppressor), Effectively Suppress Surge Voltage And Transient Spike Voltage In The Circuit, Lightningproof & Esd Protection. Onboard Self-Recovery Fuse And Protection Diodes, Ensures The Current/Voltage Stable Outputs, Provides Over-Current/Over-Voltage Proof, Improves Shock Proof Performance..
Onboard Power Supply Screw Terminal, Allows 5V~36V Dc Wide Range Input. Support Wall-Mount And Rail-Mount.
Transmission Distance Up To 1.2Km, The Rs232 Signal Can Be Converted Into A Balanced Differential Rs485/422 Signal With Stable Transmission Rate, The Transmission Distance Is About 1.2Km For Rs485/422.
Onboard Unibody Power Supply Isolation, Provides Stable Isolated Voltage, Needs No Extra Power Supply For The Isolated Terminal. Onboard Unibody Digital Isolation, Allows Signal Isolation, High Reliability, Strong Anti-Interference, Low Power Consumption.
Features
- RS232 To RS485/422 Active Digital isolated Serial Converter, Converting the RS232 signal into balanced differential RS485/422 signal for interface converting, expanding nodes and long-distance communication. Onboard SP3232EEN and SP485EEN chips. Fast communication, stable and reliable, better compatibility. Stable transmission at the rate of 300~921600bps
- Onboard unibody power supply isolation, provides stable isolated voltage, needs no extra power supply for the isolated terminal. Onboard unibody digital isolation, allows signal isolation, high reliability, strong anti-interference, low power consumption
- Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit, lightningproof & ESD protection. Onboard self-recovery fuse and protection diodes, ensures the current/voltage stable outputs, provides over-current/over-voltage proof, improves shock proof performance.
- Transmission distance up to 1.2km, The RS232 signal can be converted into a balanced differential RS485/422 signal with stable transmission rate, the transmission distance is about 1.2km for RS485/422
- Onboard power supply screw terminal, allows 5V~36V DC wide range input. Support Wall-mount And Rail-Mount
- See more on Amazon...
Brand: Wonrabai | Manufacturer: Wonrabai
Warranty: Any questions, please feel free to send us Amazon message
See On Amazon #13
SIM7670G LTE Cat-1/GNSS HAT Board for Raspberry Pi 5/ 4B/ 3B+/3B/ Zero W/Zero 2W, Support Global Multi-Band LTE 4G Cat-1/ GNSS Positioning/Dial-up on Windows/Linux/, with 3X USB 2.0 Extended Ports
Asin: B0CXPW7NVW
✅ Supports Gnss Positioning---Supports Gps, Glonass, Galileo, Beidou Positioning.
✅ Application Example---Provides Multiple Networking Demos With Waveshare.Cloud, Using The Lightweight Mqtt Protocol To Achieve Data Visualization Service.
✅ Support Waveshare.Cloud ---Provides Tutorial And Demo For Quick Start Of Smart Iot Solutions, With Large-Screen Data Visualization Display To Meet Various Application Scenarios.
✅ Supports Dial-Up On Windows/Linux---Supports Connecting To Windows Pc, Raspberry Pi, Or Other Linux Industrial Devices Via Usb Interface For Lte Cat-1 Networking And Extending Usb Ports.
Features
- SIM7670G LTE Cat-1/GNSS HAT, with Standard Pi 40PIN GPIO extension header, compatibe with Raspberry Pi series boards. Support Global Multi Band of LTE Cat-1---LTE Cat-1: Up To 5Mbps (Uplink) / Up To 10Mbps (Downlink)
- Supports Dial-up on Windows/Linux---Supports connecting to Windows PC, Raspberry Pi, or other Linux industrial devices via USB interface for LTE Cat-1 networking and extending USB ports
- Supports GNSS positioning---Supports GPS, GLONASS, Galileo, BeiDou positioning
- Support Waveshare.cloud ---provides tutorial and demo for quick start of smart IoT solutions, with large-screen Data Visualization display to meet various application scenarios
- Application Example---provides multiple networking demos with Waveshare.cloud, using the lightweight MQTT protocol to achieve data visualization service
- See more on Amazon...
Brand: Wonrabai | Manufacturer: Wonrabai
Warranty: Any questions, please feel free to send us Amazon message
See On Amazon #14
Wonrabai Waveshare PCIe to USB 3.2 Gen1 HAT for Raspberry Pi 5, PCIe to USB HUB, PCIe to Four High Speed USB Ports for Connecting More Peripherals, Driver-Free Plug and Play, HAT + Standard
Asin: B0CY5KB2LJ
✅ More Usb Capability For Raspberry Pi 5, Extends The Pcie Interface To 4X High Speed Usb 3.2 Gen1 Ports For Connecting More Peripherals.
✅ Reserved Airflow Vent For Cooling Fan, Better Cooling Effect For Pi5, More Stable Operation. Note: Cooling Fan Is Not Included.
✅ Onboard Power Monitoring Chip And Eeprom, Real-Time Monitoring Of Power Status, Supports Usb Port Power Control Via Software.
✅ Connecting To Pi5 Via 16Pin Cable, Based On 16Pin Pcie Interface Of Raspberry Pi 5.
Features
- This is Waveshare PCIe TO USB 3.2 Gen1 HAT Designed for Raspberry Pi 5, driver-free, plug and play, HAT + Standard. Only compatible with Raspberry Pi 5.
- Connecting to PI5 via 16PIN Cable, Based on 16PIN PCIe Interface of Raspberry Pi 5
- More USB Capability for Raspberry Pi 5, Extends The PCIe Interface To 4x High Speed USB 3.2 Gen1 Ports for connecting more peripherals
- Onboard Power Monitoring Chip And EEPROM, Real-time monitoring of power status, supports USB port power control via software
- Reserved Airflow Vent for Cooling fan, Better Cooling Effect For Pi5, more stable operation. Note: Cooling fan is NOT included
- See more on Amazon...
Brand: Wonrabai | Manufacturer: Wonrabai
Warranty: Any questions, please feel free to send us Amazon message
See On Amazon #15
Waveshare ESP32-S3 4.3inch Capacitive Touch Display 800x480 Based on ESP32-S3 Microcontroller 5-Point Touch, 32-Bit LX7 Dual-Core Processor, Up to 240MHz Frequency, Support 2.4GHz WiFi & Bluetooth 5
Asin: B0CTG8LZ6Z | Model: 4.3inch | PartNumber: 4.3inch
Built In 512Kb Of Sram And 384Kb Rom, With Onboard 8Mb Psram And 8Mb Flash..
Supports Capacitive Touch Control Via I2c Interface, 5-Point Touch With Interrupt Support. Onboard Can, Rs485, I2c Interface And Tf Card Slot, Integrates Full-Speed Usb Port..
Onboard 4.3Inch Capacitive Touch Display, 800×480 Resolution, 65K Color. Can Smoothly Run Gui Programs Such As Lvgl..
Equipped With Xtensa 32-Bit Lx7 Dual-Core Processor, Up To 240Mhz Main Frequency. Supports 2.4Ghz Wi-Fi (802.11 B/G/N) And Bluetooth 5 (Le), With An Onboard Antenna..
Features
- ESP32-S3-Touch-LCD-4.3 integrates RGB interface LCD with 5-point capacitive touch, multiple peripheral interfaces.
- Equipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with an onboard antenna.
- Built in 512KB of SRAM and 384KB ROM, with onboard 8MB PSRAM and 8MB Flash.
- Onboard 4.3inch capacitive touch display, 800 480 resolution, 65K color. Can smoothly run GUI programs such as LVGL.
- Supports capacitive touch control via I2C interface, 5-point touch with interrupt support. Onboard CAN, RS485, I2C interface and TF card slot, integrates full-speed USB port.
- See more on Amazon...
Brand: Wonrabai | Manufacturer: Wonrabai
Dimensions: 1.96 x 0.30 x 2.60 inches | Weight: 0.10 pounds
Warranty: LCD Monitors
See On Amazon #16
Waveshare for Raspberry Pi 5 PCIe to M.2 Adapter, Supports NVMe Drive Protocol Compatible with 2230/2242 Size M.2 Solid State Drive, High-Speed Reading/Writing, Gen2 and Gen3 Modes, HAT + Standard
Asin: B0CSPLGHN8
Nvme Drive Protocol Support: Compatible With 2230/2242 Size M.2 Solid State Drive, Supports Gen2 And Gen3 Modes, Supports Booting Pi5 From Solid State Drive.
Reserved Airflow Vent For Cooling Fan: Better Cooling Effect For Pi5 And Solid State Drive.
Onboard Dual Led Indicators: Easy To Monitor The Working Status. Onboard Power Monitoring Chip And Eeprom: Real-Time Monitoring Of Solid State Drive Power Status For More Stable Operation.
Connecting To Pi5 Via 16Pin Cable: Based On 16Pin Pcie Interface Of Raspberry Pi 5.
Features
- PCIe To M.2 Adapter for Raspberry Pi 5, Supports NVMe Protocol M.2 Solid State Drive, High-speed Reading/Writing, HAT + Standard
- Connecting to PI5 via 16PIN Cable: Based on 16PIN PCIe Interface of Raspberry Pi 5
- NVMe Drive Protocol Support: Compatible With 2230/2242 Size M.2 Solid State Drive, Supports Gen2 and Gen3 Modes, Supports Booting PI5 From Solid State Drive
- Onboard Dual LED Indicators: Easy to monitor the Working Status. Onboard Power Monitoring Chip And EEPROM: Real-time monitoring of Solid State Drive power status for More Stable operation
- Reserved Airflow Vent for Cooling fan: Better Cooling Effect For Pi5 And Solid State Drive
- See more on Amazon...
Brand: Wonrabai | Manufacturer: Wonrabai
Warranty: Small Parts
See On Amazon #17
USB Sound Card with 8 5W Speaker for Raspberry Pi/Jetson Nano, USB to Audio Adapter Support Recording and Playback, Stereo Codec Onboard Microphone and Speaker Header, Driver-Free, Plug and Play
Asin: B0CXJ2RTWJ
✅ Multiple Sampling Rates Support--Supported Sampling Rates Including 8K, 11.025K, 12K, 16K, 22.05K, 24K, 32K, 44.1K, And Default 48K (Hz).
✅ Support Multiple Systems--Compatible With Mac/Win7/8/8.1/10, Linux, Android, Wince.
✅ Plug And Play, Easy To Use--Standard Usb 2.0 Port, Driver-Free, Portable Size.
✅ "Listening / Speaking" Two-In-One-- Onboard Microphone, And Speaker Header, Easy Audio Input / Output..
Features
- This is a Waveshare USB sound card/USB audio module with 8 5W Speaker that supports recording and playback, a stereo codec, a built-in microphone, and a speaker. It is suitable for Raspberry Pi/Jetson Nano, driver-free, plug-and-play
- Listening / Speaking Two-In-One-- onboard microphone, and speaker header, easy audio input / output.
- Multiple sampling rates support--supported sampling rates including 8K, 11.025K, 12K, 16K, 22.05K, 24K, 32K, 44.1K, and default 48K (Hz)
- Plug and Play, easy to use--standard USB 2.0 port, driver-free, portable size
- Support Multiple systems--Compatible with mac/Win7/8/8.1/10, Linux, Android, WinCE
- See more on Amazon...
Brand: Wonrabai | Manufacturer: Wonrabai
Warranty: Any questions, please feel free to send us Amazon message
See On Amazon #18
Waveshare USB to UART Debugger Module for Raspberry Pi 5, Type-A Port, Onboard UART Connector, Supports Multiple Connection Methods/Multi-System Linux, Android, Windows 7/8/8.1/10/11,etc.
Asin: B0CW12C4XX
【Supports Multi Systems】Linux, Android, Windows 7/8/8.1/10/11,Etc..
Onboard 3.3V And 5V Ttl Level Switch Pins For Selecting Ttl Communication Level. Supports 3.3V/5V Output (The Module Is Powered By Usb, And The Onboard Jumper Should Be Shorted To 3.3V Or 5V Accordingly).
【Multiple Protection Circuit, Safe And Stable】 Onboard Self-Recovery Fuse And Transient Voltage Suppressor, Anti-Overcurrent And Anti-Overvoltage, Anti-Surge, Anti-Static, Improves Shock Proof Performance, Stable And Safe Communication Performance; Onboard Io Protection Circuits, Anti-Surge, Anti-Static, Stable And Safe Communication Performance.
【Supports Multiple Connection Methods】Connect To Pi5 Uart Debug Connector Via Sh1.0 3Pin Cable/ Connect Onboard 6Pin Header To Pi5 Gpio Uart Interface Via 6Pin Cable/ Connect Onboard 6Pin Header To Pi5 Uart Debug Connector Via Sh1.0 To 3Pin Cable.
Features
- for Raspberry Pi 5 UART Debugger Module for Raspberry Pi 5, Type-A Port, Onboard UART Connector, High Baud Rate Transmission
- Supports multiple Connection Methods Connect to PI5 UART Debug Connector via SH1.0 3PIN cable/ Connect onboard 6PIN header to PI5 GPIO UART Interface via 6PIN cable/ Connect onboard 6PIN header to PI5 UART Debug Connector via SH1.0 to 3PIN cable
- Supports Multi Systems Linux, Android, Windows 7/8/8.1/10/11,etc.
- Multiple Protection Circuit, Safe And Stable Onboard self-recovery fuse and Transient Voltage Suppressor, anti-overcurrent and anti-overvoltage, anti-surge, anti-static, improves shock proof performance, stable and safe communication performance; Onboard IO protection circuits, anti-surge, anti-static, stable and safe communication performance
- Onboard 3.3V and 5V TTL level switch pins for selecting TTL communication level. Supports 3.3V/5V output (the module is powered by USB, and the onboard jumper should be shorted to 3.3V or 5V accordingly)
- See more on Amazon...
Brand: Wonrabai | Manufacturer: Wonrabai
Weight: 0.02 pounds
Warranty: Any questions, please send us Amazon message
See On Amazon #19
Active Cooler for Raspberry Pi 5, Active Cooling Fan Aluminium Heatsink with Thermal Pads
Asin: B0CSK47HYV | Model: W-C-B12 | PartNumber: W-C-B12
Easy To Install: Connect The 4Pin Cable To The Fan Header On Raspberry Pi 5, Attach Thermal Pads And Fix The Active Cooler Via Spring-Loaded Push Pins.
Fan Speed Control: Pulse Width Modulation Control With Tachometer. Fan Speed: 8000±10%Rpm.
Input Voltage: 5V Dc (Supplied Via Four-Pin Fan Header On Raspberry Pi 5).
Combines A Temperature-Controlled Blower Fan With An Aluminium Heatsink To Accelerate Heat Dissipation.
Features
- Compatible with Raspberry Pi 5 ---This Active Cooling Fan, Aluminium Heatsink is only designed for Raspberry Pi 5 4GB/8GB.
- Combines A Temperature-Controlled Blower Fan with an aluminium heatsink to accelerate heat dissipation
- Easy to install: Connect the 4pin cable to the fan header on Raspberry Pi 5, attach thermal pads and fix the Active Cooler Via Spring-Loaded Push Pins
- Input voltage: 5V DC (supplied via four-pin fan header on Raspberry Pi 5)
- Fan speed control: Pulse width modulation control with tachometer. Fan speed: 8000 10%RPM
- See more on Amazon...
Brand: Wonrabai | Manufacturer: Wonrabai
See On Amazon #20
1.69inch Round LCD Display Module with Touch Panel, Micro IPS LCD Display 240 280 Resolution SPI and I2C Communication 262K Display Color Compatible with Raspberry Pi ESP32S3 Pico Arduino STM32, etc
Asin: B0D1QN5XYR | Model: 1.69inch touch lcd | PartNumber: 1.69inch touch lcd
✅Spi And I2c Control Interfaces, Using Spi And I2c Communication Respectively, Minimizes Required Io Pins. Compatible With Raspberry Pi / Esp32s3 / Raspberry Pi Pico / Arduino / Stm32.
✅Comes With Online Development Resources And Manual (Examples For Raspberry Pi / Esp32s3 / Raspberry Pi Pico / Arduino / Stm32), Please Check Below.
✅Onboard Voltage Translator, Compatible With 3.3V / 5V Power Input.
✅High Touch Screen Transmittance, Fast Response And Long Lifetime. Embedded St7789v2 Driver Chip And Cst816t Capacitive Touch Control Chip.
Features
- Waveshare 1.69inch Round LCD Display Module with Touch panel, Micro LCD Display, 240 280 Resolution, 240 280 resolution, 262K colors, clear and colorful displaying effect
- High touch screen transmittance, fast response and long lifetime. Embedded ST7789V2 driver chip and CST816T capacitive touch control chip
- SPI and I2C Control Interfaces, using SPI and I2C communication respectively, minimizes required IO pins. Compatible with Raspberry Pi / ESP32S3 / Raspberry Pi Pico / Arduino / STM32
- Onboard Voltage Translator, compatible With 3.3V / 5V Power Input
- Comes with online development resources and manual (examples for Raspberry Pi / ESP32S3 / Raspberry Pi Pico / Arduino / STM32), Please check below
- See more on Amazon...
Brand: Wonrabai | Manufacturer: Wonrabai
Weight: 0.01 pounds
Warranty: Any questions, please feel free to send us Amazon message
See On Amazon #21
Wonrabai Waveshare 2.4inch LCD Display Module TFT Display Panel 240x320 Resolution 65K RGB Display Colors Embedded ILI9341 Driver SPI Interface Compatible with Raspberry Pi/with Arduino/ STM32, etc.
Asin: B0CY7QJ8K8 | Model: 2.4inch | PartNumber: 2.4inch
✅ Spi Interface, Minimizes Required Io Pins, Compatible With Raspberry Pi/With Arduino/Stm32, Etc..
✅ As A 2.4Inch Tft Display Module With A Resolution Of 240 * 320, It Uses The Spi Interface For Communication. Lcd Has An Internal Controller With Basic Functions, Which Can Be Used To Draw Points, Lines, Circles, And Rectangles, And Can Display English, Chinese As Well As Pictures.
✅ Tft Display Panel; 3.3V/5V Operating Voltage; 4-Wire Spi Communication Interface.
✅ Embedded Ili9341 Driver, Using Spi Bus.
Features
- This is Waveshare 2.4inch LCD Display Module, 240 320 resolution, 65K RGB colors, clear and colorful displaying effect
- Embedded ILI9341 driver, using SPI bus
- SPI interface, minimizes required IO pins, compatible with Raspberry Pi/with Arduino/STM32, etc.
- TFT Display Panel; 3.3V/5V Operating Voltage; 4-wire SPI Communication Interface
- As a 2.4inch TFT display module with a resolution of 240 * 320, it uses the SPI interface for communication. LCD has an internal controller with basic functions, which can be used to draw points, lines, circles, and rectangles, and can display English, Chinese as well as pictures
- See more on Amazon...
Brand: Wonrabai | Manufacturer: Wonrabai
Dimensions: 1.57 x 0.20 x 1.97 inches
Warranty: Any questions, please feel free to send us Amazon message
See On Amazon #22
Waveshare USB to RS232/RS485 Serial Converter Adapter, Onboard Original FT232RNL Chip Stable and Reliable, Compatible with Mac/Linux/Android/Win11/10/8.1/8/7, etc
Asin: B0CW1MCMKN
Onboard Self-Recovery Fuse And Protection Diodes, Ensure The Current/Voltage Stable Outputs, Provide Over-Current/Over-Voltage Proof, Improve Shock Proof Performance.
Multi System Support---Compatible With Mac/Linux/Android/Win11/10/8.1/8/7, Etc.
Onboard Rs232/Rs485 Communication Switching Circuit, Configured By Switch. Onboard 120R Terminal Resistor On The Rs485 Interface, Enabled/Disabled Via Switch..
Onboard Tvs (Transient Voltage Suppressor), Effectively Suppresses Surge Voltage And Transient Spike Voltage In The Circuit, Lightningproof & Anti-Electrostatic.
Features
- USB to RS232/RS485 Serial Converter, Adopts original FT232RNL chip, fast communicating, stable and reliable, better compatibility
- Onboard TVS (Transient Voltage Suppressor), effectively suppresses surge voltage and transient spike voltage in the circuit, lightningproof & anti-electrostatic
- Onboard self-recovery fuse and protection diodes, ensure the current/voltage stable outputs, provide over-current/over-voltage proof, improve shock proof performance
- Onboard RS232/RS485 communication switching circuit, configured by switch. Onboard 120R terminal resistor on the RS485 interface, enabled/disabled via switch.
- Multi system Support---Compatible with Mac/Linux/Android/Win11/10/8.1/8/7, etc
- See more on Amazon...
Brand: Wonrabai | Manufacturer: Wonrabai
Weight: 0.08 pounds
Warranty: Any questions, please send us Amazon message
See On Amazon #23
ESP32-H2 Microcontroller Development Board with ESP32-H2-MINI-1-N4 Module 96MHz Processor Built in 4MB Flash, Support Bluetooth 5 and IEEE 802.15.4 (Zigbee 3.0 and Thread) Wireless Communication
Asin: B0CXF1RZ49
✅ Onboard Ch343 And Ch334 Usb Hub Chips, Supports Usb And Uart Development At The Same Time Via A Usb-C Port. Compatible With The Pinout Of The Esp32-H2-Devkitm-1 Development Board, More Convenient To Use And Expand A Variety Of Peripheral Modules.
✅ It Is Compact In Size And Powerful, With Multiple Peripheral Interfaces. Suitable For Smart Home, Industrial Automation, Healthcare, Consumer Electronics And Other Applications.
✅ Supports A Variety Of Low-Power Operating States, Adjustable Communication Distance, Data Rate, And Power Consumption Balance, To Meet The Power Requirements Of Various Application Scenarios.
✅ Adopts Esp32-H2-Mini-1-N4 Module, Which Is Equipped With Risc-V 32-Bit Single-Core Processor, Up To 96Mhz Main Frequency, Built-In 4Mb Flash; Integrates Rich Peripherals Including Spi, Uart, I2c, I2s, Led Pwm, Adc And Other Interfaces.
Features
- The ESP32-H2-DEV-KIT-N4 is an entry-level RISC-V microcontroller development board integrating Bluetooth 5 and IEEE 802.15.4 (Zigbee 3.0 and Thread). Its Bluetooth Low Energy subsystem supports Bluetooth 5 (LE) and Bluetooth Mesh
- Adopts ESP32-H2-MINI-1-N4 module, which is equipped with RISC-V 32-bit single-core processor, up to 96MHz main frequency, built-in 4MB Flash; Integrates rich peripherals including SPI, UART, I2C, I2S, LED PWM, ADC and other interfaces
- Onboard CH343 and CH334 USB HUB chips, supports USB and UART development at the same time via a USB-C port. Compatible with the pinout of the ESP32-H2-DevKitM-1 development board, more convenient to use and expand a variety of peripheral modules
- Supports a variety of low-power operating states, adjustable communication distance, data rate, and power consumption balance, to meet the power requirements of various application scenarios
- It is compact in size and powerful, with multiple peripheral interfaces. Suitable for smart home, industrial automation, healthcare, consumer electronics and other applications
- See more on Amazon...
Brand: Wonrabai | Manufacturer: Wonrabai
Warranty: Any questions, please feel free to send us Amazon message
See On Amazon #24
Built-in WiFi Raspberry Pi Pico W Microcontroller Board with Pre-soldered Header, Based on Official RP2040 Dual-core Processor, Dual-Core Arm Cortex M0+ Processor, with USB Cable
Asin: B0CW3CCXVH
✅Built-In Wi-Fi: Onboard Infineon Cyw43439 Wireless Chip, Supports 2.4/5 Ghz Wi-Fi 4.
✅C/C++, Micropython Support: Comprehensive Sdk, Dev Resources, Tutorials To Help You Easily Get Started.
✅Dual-Core Arm Processor: Dual-Core Arm Cortex M0+ Processor, Flexible Clock Running Up To 133 Mhz.
✅26 X Multi-Function Gpio Pins: Configurable Pin Function, Allows Flexible Development And Integration.
Features
- Raspberry Pi Pico W with Pre-Soldered Header comes with a wireless communication module. The wireless module hardware uses Infineon's CYW43439 wireless chip, which supports Wi-Fi 4 wireless networks in the 2.4 / 5 GHz band, making it the perfect solution for wireless network control and communication.
- 26 x multi-function GPIO pins: configurable pin function, allows flexible development and integration
- Built-in Wi-Fi: Onboard Infineon CYW43439 wireless chip, supports 2.4/5 GHZ Wi-Fi 4
- Dual-core Arm processor: Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz
- C/C++, MicroPython support: Comprehensive SDK, dev resources, tutorials to help you easily get started
- See more on Amazon...
Brand: Wonrabai | Manufacturer: Wonrabai
Warranty: Any questions, please send us Amazon message
See On Amazon #25
ESP32-C6 Microcontroller WiFi Development Board Adopts ESP32-C6-WROOM-1-N8 Module Built-in 8MB Flash, Integrated WiFi 6 Bluetooth 5 and and IEEE 802.15.4, Support USB and UART Development
Asin: B0CT94KTW9
✅Integrates Rich Peripherals Including Spi, Uart, I2c, I2s, Led Pwm, Sdio And Other Interfaces.
✅Comes With Online Examples And Tutorials For Esp-Idf Development Environment, So That You Can Easily And Quickly Get Started And Apply It To The Product.
✅Onboard Ch343 And Ch334 Usb Hub Chips, Supports Usb And Uart Development At The Same Time Via A Usb-C Port. Compatible With The Pinout Of The Esp32-C6-Devkitc-1-N8 Development Board, More Convenient To Use And Expand A Variety Of Peripheral Modules..
✅Adopts Esp32-C6-Wroom-1-N8 Module With Risc-V 32-Bit Single-Core Processor, Up To 160Mhz Main Frequency, Built-In 8Mb Flash.
Features
- The ESP32-C6-DEV-KIT-N8 is an entry-level RISC-V microcontroller development board, Integrated WiFi 6, Bluetooth 5 and and IEEE 802.15.4 (Zigbee 3.0 and Thread) wireless communication, with superior RF performance.
- Adopts ESP32-C6-WROOM-1-N8 module with RISC-V 32-bit single-core processor, up to 160MHz main frequency, built-in 8MB Flash
- Integrates rich peripherals including SPI, UART, I2C, I2S, LED PWM, SDIO and other interfaces
- Onboard CH343 and CH334 USB HUB chips, supports USB and UART development at the same time via a USB-C port. Compatible with the pinout of the ESP32-C6-DevKitC-1-N8 development board, more convenient to use and expand a variety of peripheral modules.
- Comes with Online examples and tutorials for ESP-IDF development environment, so that you can easily and quickly get started and apply it to the product
- See more on Amazon...
Brand: Wonrabai | Manufacturer: Wonrabai
Warranty: Small Parts
See On Amazon #26
Waveshare Triple OLEDs/LCD HAT for Raspberry Pi 5/4B/3B+/3B/Zero W/Zero 2W, Onboard 2inch IPS LCD Main Screen 240x320 SPI Interface and Dual 0.96inch OLED Secondary Screens 128x64 I2C Interface
Asin: B0CTGBKNR5
Dual 0.96Inch Oled Secondary Screens With Built In Ssd1315 Driver Chip, I2c Interface Communication, Blue Display Color, 128×64 Resolution, Can Be Used To Display Key Informations, Status Indicator Messages Or Small Graphics.
Comes With Online Development Resources And Manual (Raspberry Pi/Visionfive2/Arduino/Stm32, Etc.) , Pls Check The Description Below..
Onboard 4X User-Defined Keys For Extended Applications.
2Inch Ips Lcd Main Screen With Built In St7789vw Driver Chip, Spi Interface Communication, Wide Viewing Angle, Supports 262K Color Display, 240×320 Resolution.
Features
- This is the Triple OLEDs/LCD HAT for Raspberry Pi. Onboard 2inch IPS LCD Main Screen and Dual 0.96inch Blue OLED Secondary Screens, With 40PIN GPIO Header, Compatible With Raspberry Pi Series Boards
- 2inch IPS LCD Main Screen with built in ST7789VW driver chip, SPI interface communication, wide viewing angle, supports 262K color display, 240 320 resolution
- Dual 0.96inch OLED secondary screens with built in SSD1315 driver chip, I2C interface communication, blue display color, 128 64 resolution, can be used to display key informations, status indicator messages or small graphics
- Onboard 4x user-defined keys for extended applications
- Comes with online development resources and manual (Raspberry Pi/VisionFive2/Arduino/STM32, etc.) , pls check the description below.
- See more on Amazon...
Brand: Wonrabai | Manufacturer: Wonrabai
Warranty: Small Parts
See On Amazon #27
ESP32-C6 Microcontroller, WiFi 6/Bluetooth 5 and IEEE 802.15.4 Development Board, Adopts ESP32-C6-MINI-1 Chip 160MHz RISC-V 32-Bit Single-Core Processor Supports Raspberry Pi Pico Expansion Board
Asin: B0CY87QBNY
✅ Support Wifi 6 And Ble 5 ---Esp32-C6 Integrates 2.4 Ghz Wi-Fi 6 (802.11 Ax/B/G/N) With 40 Mhz Of Bandwidth Support, Its Bluetooth Low Energy Subsystem Supports Bluetooth 5 (Le) And Bluetooth Mesh.
✅ It Is Compatible In Size And Interface With Most Of The Raspberry Pi Pico Hats. Easy To Expand, With Multiple Peripheral Interfaces. Suitable For Smart Home, Industrial Automation, Healthcare, Consumer Electronics And Other Applications..
✅ 27 × Multi-Function Gpio Pins And 7 × Expanded Io Pins, Configurable Pin Function, Allows Flexible Development And Integration. Rich Peripheral Interfaces, Including Full-Speed Usb Otg, Spi, I2c, Uart, Adc, Pwm, Etc. To Achieve Various Functions Flexibly..
✅ Integrated 320Kb Rom, 512Kb Hp Sram, 16Kb Lp Sram And 4Mb Flash. Integrated 2.4Ghz Wi-Fi And Bluetooth Le Dual-Mode Wireless Communication, With Superior Rf Performance..
Features
- This is Waveshare ESP32-C6-Pico is an entry-level RISC-V microcontroller development board integrating WiFi 6, Bluetooth 5 and IEEE 802.15.4 (Zigbee 3.0 and Thread). Adopts ESP32-C6-MINI-1 chip with RISC-V 32-bit single-core processor, capable of running at 160 MHz.
- Integrated 320KB ROM, 512KB HP SRAM, 16KB LP SRAM and 4MB flash. Integrated 2.4GHz Wi-Fi and Bluetooth LE dual-mode wireless communication, with superior RF performance.
- Support WIFI 6 and BLE 5 ---ESP32-C6 integrates 2.4 GHz Wi-Fi 6 (802.11 ax/b/g/n) with 40 MHz of bandwidth support, Its Bluetooth Low Energy subsystem supports Bluetooth 5 (LE) and Bluetooth Mesh
- 27 multi-function GPIO pins and 7 expanded IO pins, configurable pin function, allows flexible development and integration. Rich peripheral interfaces, including full-speed USB OTG, SPI, I2C, UART, ADC, PWM, etc. to achieve various functions flexibly.
- It is compatible in size and interface with most of the Raspberry Pi Pico HATs. Easy to expand, with multiple peripheral interfaces. Suitable for smart home, industrial automation, healthcare, consumer electronics and other applications.
- See more on Amazon...
Brand: Wonrabai | Manufacturer: Wonrabai
Warranty: Any questions, please feel free to send us Amazon message
See On Amazon #28
Waveshare 4-Ch RS485 to RJ45 Ethernet Serial Server, 4 Channels RS485 Independent Operation, Rail-Mount Industrial Isolated Serial Module, Bi-Directional Transparent Transmission, Modbus Gateway
Asin: B0CTMJH7WL
Combines Multiple Functions In One, Including Serial Server, Modbus Gateway, Mqtt Gateway, And Rs485 To Json, Etc. Modbus Gateway Support: Suitable For Modbus Networking Upgrade, Can Be Used With Specific Configuration Software..
It Is Suitable For Applications Like Data Acquisition, Iot Gateway, Safety & Security Iot, And Intelligent Instrument Monitoring, Meeting Various Application Scenarios..
Multi Communication Modes: Supports Tcp Server / Tcp Client / Udp Multicast / Udp Mode.
4-Ch Rs485 Can Work Independently Without Affecting Each Other At The Same Time, Enabling More Effective Data Transmission.
Features
- 4-Ch RS485 to RJ45 Ethernet Serial Server, 4 Channels RS485 Independent Operation, Bi-directional transparent data transmission between 4-Ch RS485 and Ethernet.
- 4-ch RS485 can work independently without affecting each other at the same time, enabling more effective data transmission
- Combines multiple functions in one, including serial server, Modbus gateway, MQTT gateway, and RS485 to JSON, etc. Modbus gateway support: suitable for Modbus networking upgrade, Can Be Used With specific Configuration Software.
- Multi communication modes: supports TCP server / TCP client / UDP multicast / UDP mode
- It is suitable for applications like data acquisition, IoT gateway, safety & security IoT, and intelligent instrument monitoring, meeting various application scenarios.
- See more on Amazon...
Brand: Wonrabai | Manufacturer: Wonrabai
Warranty: Small Parts
See On Amazon #29
DIN Rail ABS Case for Raspberry Pi 5, Pi 5 Case Support DIN Rail Mount, Large Inner Space Allows Accommodating an Extra Add-on
Asin: B0CW22BNX4
Ingenious Opening Design---With Rich Interfaces Opening.
Lightweight Abs Material , Durable & Eco-Friendly.
Compatible With Various Raspberry Pi Hats--The Large Inner Space Allows Accommodating An Extra Add-On. Allows To Connect With Waveshare Poe Hat (F), Rs485 Can Hat, 2-Ch Rs485 Hat.
Din Rail Mount Support---Injection Moduling Abs Body With Rail Mount Support, Easy-To-Use.
Features
- DIN rail ABS Case for Raspberry Pi 5---DIN rail mount support, ABS material, clear top window, large inner space
- DIN rail mount support---injection moduling ABS body with rail mount support, easy-to-use
- Ingenious Opening Design---with rich interfaces opening
- Compatible with various Raspberry Pi HATs--the large inner space allows accommodating an extra add-on. Allows to connect with Waveshare PoE HAT (F), RS485 CAN HAT, 2-CH RS485 HAT
- Lightweight ABS Material , Durable & Eco-friendly
- See more on Amazon...
Brand: Wonrabai | Manufacturer: Wonrabai
Weight: 0.10 pounds
Warranty: Any questions, please send us Amazon message
See On Amazon #30
Aluminum Heatsink for Raspberry Pi 5, Pi 5 Heatsink with Thermal Pads and Spring-Loaded Push Pins
Asin: B0CS6QRBX9
Good Heat Dissipation Effect---Corrosion / Oxidation Resisting, Better Heat Dissipation.
Note: The Raspberry Pi 5 And Tf Card Are Not Included..
Easy To Install---Attach The Thermal Pads And Fix The Aluminum Heatsink Via Spring-Loaded Push Pins.
Matches The Size And Mounting Holes Of The Raspberry Pi 5, Comes With Thermal Pads.
Features
- Compatible with Raspberry Pi 5 --- This Aluminum Heatsink is only designed for Raspberry Pi 5 4GB/8GB.
- Matches the size and mounting holes of the Raspberry Pi 5, Comes with Thermal Pads
- Good Heat Dissipation Effect---Corrosion / Oxidation Resisting, Better Heat Dissipation
- Easy to install---Attach the thermal pads and fix the Aluminum Heatsink Via Spring-Loaded Push Pins
- Note: the Raspberry Pi 5 and TF card are NOT included.
- See more on Amazon...
Brand: Wonrabai | Manufacturer: Wonrabai
Weight: 0.04 pounds
See On Amazon