X8r - Buying Guide
Last Updated: 03/29/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
X8R Springs Repair KIT Set of 4 for Door Lock Actuator Compatible with Mercedes-Benz ML Class W164 Between 2006-2012 Model Part: X8R8
Asin: B01B536T8W | Ean: 4893433199320, 4893433194202
Fix Your Locks For Good! Produced To The Finest Tolerances For The Perfect Fit Made From High Quality Stainless Steel (Will Not Deteriorate Over Time Like Springs Offered By Some Others) Our Improved Design Thicker Wound Springs Will Restore Your Lock And Will Not Deteriorate Over Time Like The Oem Part Does, Save The Cost Of A Replacement Actuator That Will Just Fail Again..
Will This Repair My Vehicles Door Locks ? Below Is A List Of The Models That Our Product Is Compatible With Our Springs Will Also Repair The Same Issue With The Keyless Go Door Lock Models Affected: Mercedes Ml W164 Vehicles Manufactured From 2006-2012 - Mercedes Gl X164 Vehicles Manufactured From 2006-2010.
Fix Your Locks For Good! Produced To The Finest Tolerances For The Perfect Fit Made From High Quality Stainless Steel (Will Not Deteriorate Over Time Like Springs Offered By Some Others) Our Improved Design Thicker Wound Springs Will Restore Your Lock And Will Not Deteriorate Over Time Like The Oem Part Does, Save The Cost Of A Replacement Actuator That Will Just Fail Again..
Features
- The Solution: Fit our improved design Stainless Steel Springs and restore your door locks to full health for good. Simply install our improved design replacement springs and restore your locks for good, full instructions are included to guide you through this process.
- Fix your locks for good! Produced to the finest tolerances for the perfect fit Made from high quality Stainless Steel (will not deteriorate over time like springs offered by some others) our improved design thicker wound springs will restore your lock and will not deteriorate over time like the OEM part does, save the cost of a replacement actuator that will just fail again.
- Fix your locks for good! Produced to the finest tolerances for the perfect fit Made from high quality Stainless Steel (will not deteriorate over time like springs offered by some others) our improved design thicker wound springs will restore your lock and will not deteriorate over time like the OEM part does, save the cost of a replacement actuator that will just fail again.
- WILL THIS REPAIR MY VEHICLEs DOOR LOCKS ? Below is a list of the models that our product is compatible with Our springs will also repair the same issue with the keyless Go door lock Models Affected: MERCEDES ML W164 VEHICLES MANUFACTURED FROM 2006-2012 - MERCEDES GL X164 VEHICLES MANUFACTURED FROM 2006-2010
- See more on Amazon...
Brand: X8R | Manufacturer: X8R
Dimensions: 3.00 x 3.00 x 3.00 inches | Weight: 0.19 pounds
See On Amazon #2
X8R DOOR LOCK LATCH REPAIR KIT SPRINGS SET COMPATIBLE WITH LAND ROVER DISCOVERY 1 1989-1998 / RANGE ROVER CLASSIC 1970-1995, PART # X8R10 / X8R0010
Asin: B00SP203MA | Model: X8R10 | PartNumber: X8R10
The Solution: Fit Our Improved Design Stainless Steel Springs And Restore Your Door Locks To Full Health For Good. Simply Install Our Improved Design Replacement Springs And Restore Your Locks For Good, Full Instructions Are Included To Guide You Through This Process..
Will This Repair My Vehicles Door Locks ? Below Is A List Of The Models That Our Product Is Compatible With Models Affected: Discovery Mk 1 (200 + 300) 1989–1998, Range Rover Mk1 Classic 1970–1996 You Will Receive: - 5X Replacement Stainless Steel Improved Design Springs.
The Cause: The Poor Quality Springs Within Your Door Lock Mechanisms Wear And Can Even Snap Causing These Symptoms The Springs Within The Door Lock Actuator Mechanisms Deteriorate Over Time, The Oem Spring Is Made From Cheap Metal Which Wears Quickly, This Wear Leads To The Symptoms Noted Above. Luckily We Have The Solution...
Features
- Struggling to unlock your Land Rover? Turning the key and pulling the handle to open your doors? Or fed up of holding up the latch to open the doors?
- The Cause: The poor quality springs within your door lock mechanisms wear and can even snap causing these symptoms The Springs within the door lock actuator mechanisms deteriorate over time, the OEM spring is made from cheap metal which wears quickly, this wear leads to the symptoms noted above. Luckily we have THE solution..
- The Solution: Fit our improved design Stainless Steel springs and restore your door locks to full health for good. Simply install our improved design replacement springs and restore your locks for good, full instructions are included to guide you through this process.
- WILL THIS REPAIR MY VEHICLEs DOOR LOCKS ? Below is a list of the models that our product is compatible with Models Affected: Discovery MK 1 (200 + 300) 1989 1998, Range Rover MK1 Classic 1970 1996 You will receive: - 5x Replacement stainless steel improved design springs
- See more on Amazon...
Brand: X8R | Manufacturer: X8R
See On Amazon #3
LRNJ / X8R AIR SUSPENSION COMPRESSOR FILTER DRIER UNIT WITH NEW ALLUMINUM END CAP COMPATIBLE WITH LAND ROVER LR3 / LR4, PART # VUB504700 VUB504700/X8R37
Asin: B078KFHHXP | Ean: 0751446380170 | UPC: 751446380170
Models Affected: Land Rover Discovery Mk 3 (Lr3) 2005-2009 Land Rover Discovery Mk 4 (Lr4)2010-2012 Land Rover Range Rover Sport 2005-2013 Land Rover Range Rover L322 2006-2009 Air Suspension Compressor Fitted From Vin: Discovery 3 / Lr3 - 5A000360 To 9A513325, Discovery 4 / Lr4 - Aa513326 To Ca638964, Range Rover Sport - 5A900302 To 9A215622.
The Original Design For The Dryer End Cap Was Poor And Cracks Can Develop Around The Air Line Collets Causing Leaks And Vehicle Faults. This Kit Includes: New Air Suspension Drier (Complete All Filters And Drying Beads) With Improved Design Dryer End Cap (Re-Designed And Engineered To Not Fail Again) Made From Billet Aluminium And Fitted With A Viton Seal To Provide A Perfect Long Lasting Seal With The Dryer Canister. Improved Metal Collets And Materials, Designed To Never Fail Again..
Is Your Vehicles Air Suspension Rising Slowly, Noisily, Or Perhaps Failing To Rise At All? Eas Amber Light Lit? Fault Code C1a20, C1a1364, C50, Or C1a20-64 Showing? One Or More Of These Errors: “Suspension Error Only Normal Height Available” “Suspension Fault; Pressure Not Rising Quick Enough” Or “Pressure Does Not Decrease When Venting Gallery”? Associated Part Numbers, Our Kit Will Only Repair Hitachi Compressor: Rqg000017 Rqg000018 Rqg000019 Rql500040 Rqg500060 Rqg500061.
New Air Suspension Compressor Drier ( Complete All Filters And Drying Beads ) With Aluminium Improved End Cap ( Metal Airline Collets ) And O-Ring Seal..
Features
- COMPATIBLE WITH LAND ROVER LR3 / DISCOVERY 3 2005-2009 / LR4 / DISCOVERY 4 2010-2012 RANGE ROVER SPORT L320 2005-2009 & RANGE ROVER L322 FULL SIZE 2006-2009 MODELS EQUIPPED WITH HITACHI TYPE COMPRESSOR ONLY! COMPLETE AIR SUSPENSION COMPRESSOR FILTER DRIER WITH ALUMINIUM IMPROVED DESIGN END CAP BY X8R BRAND NEW QUALITY REPLACEMENT EQUIVALENT TO LAND ROVER PART NUMBER VUB504700
- New Air Suspension compressor drier ( Complete all filters and drying beads ) with Aluminium improved end cap ( metal airline collets ) and o-ring seal.
- Models Affected: Land Rover Discovery MK 3 (LR3) 2005-2009 Land Rover Discovery MK 4 (LR4)2010-2012 Land Rover Range Rover Sport 2005-2013 Land Rover Range Rover L322 2006-2009 Air suspension compressor fitted from VIN: Discovery 3 / LR3 - 5A000360 to 9A513325, Discovery 4 / LR4 - AA513326 to CA638964, Range Rover Sport - 5A900302 to 9A215622
- Is your vehicles air suspension rising slowly, noisily, or perhaps failing to rise at all? EAS Amber light lit? Fault code C1A20, C1A1364, C50, or C1A20-64 showing? One or more of these errors: Suspension error only normal height available Suspension fault; pressure not rising quick enough Or Pressure does not decrease when venting gallery ? Associated part numbers, our kit will only repair Hitachi compressor: RQG000017 RQG000018 RQG000019 RQL500040 RQG500060 RQG500061
- The original design for the dryer end cap was poor and cracks can develop around the air line collets causing leaks and vehicle faults. This kit includes: New Air Suspension Drier (Complete all filters and drying beads) with Improved design dryer end cap (re-designed and engineered to not fail again) made from billet aluminium and fitted with a Viton seal to provide a perfect long lasting seal with the dryer canister. Improved metal collets and materials, designed to never fail again.
- See more on Amazon...
Brand: LRNJ / X8R | Manufacturer: LRNJ / X8R
See On Amazon #4
X8R WABCO AIR SUSPENSION COMPRESSOR AIR DRYER FILTRATION REBUILD KIT COMPATIBLE WITH BMW X5 E53 2000-2006 MODEL PART# X8R45/FILTER
Asin: B06XGZ9F7F | Model: X8R45/FILTER | PartNumber: X8R45/FILTER | Ean: 0713012063757 | UPC: 713012063757
The Cause: The Piston Ring Within Your Vehicles Eas Air Compressor Is Worn Reducing Output Significantly. The Poor Quality Piston Ring Within Your Air Suspensions Compressor Wears Over Time Causing These Symptoms. The Piston Ring Within The Compressor Unit Of Your Air Suspension System Deteriorates Over Time, The Oem Piston Ring Is Made From A Soft Plastic That Wears Quickly, This Wear Substantially Reduces The Output Of Your Compressor Leading To Noisy, Slow Rising Or Non-Rising Suspension..
The Solution: Fit Our Improved Design Ptfe Piston Ring And Restore Your Compressor To Full Health! Simply Install Our Replacement Ptfe Piston Ring And Restore Your Compressor, Full Instructions Are Included To Guide You Through This Simple Process Which Should Take Under 30 Minutes. Our Item Is Made From Ptfe Which Has Far Superior Wear Resistance Compared To The Oem Part Providing A Permanent Fix To The Problems With Your Compressor..
Vehicles Affected: Bmw X5, E53 2000-2006 Associated Part Numbers, Our Kit Will Only Repair Wabco Compressors. Official Air Supply Unit: 6779712, 6753862, 6787617, 1092349 Wabco: 415 403 304 0, 415 403 109 0.
Features
- Noisy suspension? Is your vehicles air suspension rising slowly or perhaps failing to rise at all? Vehicle stuck at Level 1. Failing to progress through Levels 2,3,4. Suspension error light showing. Yellow suspension error light lit?
- VEHICLES AFFECTED: BMW X5, E53 2000-2006 Associated part numbers, our kit will only repair Wabco compressors. Official Air Supply Unit: 6779712, 6753862, 6787617, 1092349 Wabco: 415 403 304 0, 415 403 109 0
- THE CAUSE: The piston ring within your vehicles EAS air compressor is worn reducing output significantly. The poor quality piston ring within your air suspensions compressor wears over time causing these symptoms. The piston ring within the compressor unit of your air suspension system deteriorates over time, the OEM piston ring is made from a soft plastic that wears quickly, this wear substantially reduces the output of your compressor leading to noisy, slow rising or non-rising suspension.
- THE SOLUTION: Fit our improved design PTFE piston ring and restore your compressor to full health! Simply install our replacement PTFE piston ring and restore your compressor, full instructions are included to guide you through this simple process which should take under 30 minutes. Our item is made from PTFE which has far superior wear resistance compared to the OEM part providing a permanent fix to the problems with your compressor.
- See more on Amazon...
Brand: X8R | Manufacturer: X8R
See On Amazon #5
X8R Replacement Boot Trunk Tailgate Switch Latch Rubber Button Cover Compatible with Lexus GS LS RX Part: X8R0139
Asin: B07D9SRRS5 | Ean: 0691034426197 | UPC: 691034426197
The Solution: Install Our Replacement Rubber Button, Save The Cost Of A Complete New Unit Using Our Repair Kit There Is No Need To Replace The Entire Button Assembly, Not Only Is This Expensive And More Time Consuming Than Replacing Just The Rubber It Will Also Fail Again. Our Repair Kit Allows You To Replace Just The Rubber Part That Fails With Our Improved Material Part. This Can Be Installed In Situ With No Need To Remove The Complete Switch Unit Saving Time And Money..
Vehicles Affected: Lexus: Gs300 2006 / Gs350 2007 – 2011 / Gs430 2006 – 2007 / Gs450h 2007 – 2011 / Gs460 2008 – 2011 / Ls460 2007 – 2012 / Ls600h 2008 - 2012 / Rx330 2004 – 2009 / Rx350 2007 – 2009 / Rx400h 2006 – 2008 / Toyota: 4Runner 2003 – 2016 / Camry 2007 – 2011 / Prius 2004 – 2009 / Sienna 2004 – 2010 / Scion: Tc 2005 – 2010 / Xb 2004 – 2007 For Guidance Only, Please Inspect The Button On Your Vehicle To Confirm Compatibility..
The Fault: It Is Common For The Boot / Trunk Rubber Button To Deteriorate On These Vehicles It Is Very Common For The Trunk / Boot Button Rubber On These Vehicles To Fail. The Poor-Quality Oem Rubber Is Not Suited To The Varying Temperatures That This Part Experiences. The Part Is Prone To Melting In The Summer And Hardening In The Colder Months. Inevitably The Part Starts To Deteriorate- Leaving Sticky Residue On Your Hands When Pressing The Button Or Melting Away Completely..
Features
- SYMPTOMS OF FAULT: Rubber button sticky, melted, melting, dissolving, gummy, disintegrating, breaking down, gooey? Parts of the rubber / black marks and residue sticking to fingers when pressing the button?
- THE FAULT: It is common for the boot / trunk rubber button to deteriorate on these vehicles It is very common for the trunk / boot button rubber on these vehicles to fail. The poor-quality OEM rubber is not suited to the varying temperatures that this part experiences. The part is prone to melting in the summer and hardening in the colder months. Inevitably the part starts to deteriorate- leaving sticky residue on your hands when pressing the button or melting away completely.
- THE SOLUTION: Install our replacement rubber button, save the cost of a complete new unit Using our repair kit there is no need to replace the entire button assembly, not only is this expensive and more time consuming than replacing just the rubber it will also fail again. Our repair kit allows you to replace just the rubber part that fails with our improved material part. This can be installed in situ with no need to remove the complete switch unit saving time and money.
- VEHICLES AFFECTED: Lexus: GS300 2006 / GS350 2007 2011 / GS430 2006 2007 / GS450h 2007 2011 / GS460 2008 2011 / LS460 2007 2012 / LS600h 2008 - 2012 / RX330 2004 2009 / RX350 2007 2009 / RX400h 2006 2008 / Toyota: 4Runner 2003 2016 / Camry 2007 2011 / Prius 2004 2009 / Sienna 2004 2010 / Scion: tC 2005 2010 / xB 2004 2007 For guidance only, please inspect the button on your vehicle to confirm compatibility.
- See more on Amazon...
Brand: X8R | Manufacturer: X8R
See On Amazon #6
MERCEDES ML CLASS W163 DOOR LATCH ACTUATORS COMPLETE REPAIR KIT SPRING X4 X8R0072
Asin: B01B4ZOME4 | Model: X8R0072 | PartNumber: X8R0072 | Ean: 4893433194158
You Will Receive: Our Repair Kit Includes: 4X Replacement Stainless Steel Springs 1X Installation Tool.
Vehicles Affected: Mercedes Ml Class W163 1997-2005 Mercedes-Benz M-Class W163 Ml 230 Mercedes-Benz M-Class W163 Ml 270 Cdi Mercedes-Benz M-Class W163 Ml 320 Mercedes-Benz M-Class W163 Ml 350 Mercedes-Benz M-Class W163 Ml 350 Mercedes-Benz M-Class W163 Ml 400 Cdi Mercedes-Benz M-Class W163 Ml 430 Mercedes-Benz M-Class W163 Ml 500 Mercedes-Benz M-Class W163 Ml 55 Amg Some Associated Part Numbers: A1637302135, A1637302136, A1637201735, A1637301135, A1637302335, A1637301235, A1637201235..
The Solution: Our Replacement Improved Design / Material Springs Allow You To Repair The Actuator. Made From High Quality Stainless Steel (Will Not Deteriorate Over Time Like Springs Offered By Some Others) Our Improved Design Thicker Wound Springs Will Restore Your Lock And Will Not Deteriorate Over Time Like The Oem Part Does, Save The Cost Of A Replacement Actuator That Will Just Fail Again..
Features
- Product Description: It is a common fault for the poor quality OEM springs to snap within the door lock actuators causing the jumping door lock symptoms. Our improved design stainless steel springs enable you to replace just this component that fails, saving the cost of a complete new door lock actuator which in time would only fail again.
- The solution: Our replacement improved design / material springs allow you to repair the actuator. Made from high quality Stainless Steel (will not deteriorate over time like springs offered by some others) our improved design thicker wound springs will restore your lock and will not deteriorate over time like the OEM part does, save the cost of a replacement actuator that will just fail again.
- You will receive: Our repair kit includes: 4x Replacement stainless steel springs 1x Installation tool
- Vehicles Affected: Mercedes ML Class W163 1997-2005 Mercedes-Benz M-Class W163 ML 230 Mercedes-Benz M-Class W163 ML 270 CDI Mercedes-Benz M-Class W163 ML 320 Mercedes-Benz M-Class W163 ML 350 Mercedes-Benz M-Class W163 ML 350 Mercedes-Benz M-Class W163 ML 400 CDI Mercedes-Benz M-Class W163 ML 430 Mercedes-Benz M-Class W163 ML 500 Mercedes-Benz M-Class W163 ML 55 AMG Some Associated part numbers: A1637302135, A1637302136, A1637201735, A1637301135, A1637302335, A1637301235, A1637201235.
- See more on Amazon...
Brand: X8R | Manufacturer: X8R
Dimensions: 3.00 x 3.00 x 3.00 inches | Weight: 0.19 pounds
See On Amazon #7
X8R Steering Rack Thrust Bush Tool Grease Repair Kit Compatible with BMW, Part # X8R0227
Asin: B0B5S9L3HV | Model: X8R0227 | PartNumber: X8R0227 | Ean: 0691034428726 | UPC: 691034428726
You Will Receive: 1 X Steering Rack Socket, 1 X Bush Repair Kit Equivalent To 32106891974, 1 X Tube Of Steering Grease Equivalent To 83232208093.
Instruction Guide: Https://Youtu.Be/Ap4idy046oa.
Compatible With Bmw Applications: 1 Series (F20, F21) 2011-2019, 3 Series (F30, F31, F34, F35) 2011-2019, 4 Series (F32, F33, F36) 2013-2020, X1 (F48) 2015-Present, X3 (F25) 2010-2017. Compatible With Mercedes Applications (Tool Only): C Class (W205) 2014-2021, S Class (W222, C217, A217) 2014-2020. Associated Part Numbers: 32106891974 – Rack Repair Kit, 83232208093 – Steering Grease. ***** Please Note That Only The Steering Rack Socket Tool Is Compatible With Mercedes Vehicles, The Bush Repair Kit Is Not Suitable.
Features
- SYMPTOMS OF FAULT: Clunking noise from steering when turning into full lock, clunking noise when driving over bumps, speed bumps and potholes.
- Compatible with BMW Applications: 1 Series (F20, F21) 2011-2019, 3 Series (F30, F31, F34, F35) 2011-2019, 4 Series (F32, F33, F36) 2013-2020, X1 (F48) 2015-present, X3 (F25) 2010-2017. Compatible with Mercedes Applications (tool ONLY): C Class (W205) 2014-2021, S Class (W222, C217, A217) 2014-2020. Associated part numbers: 32106891974 rack repair kit, 83232208093 steering grease. ***** Please note that only the steering rack socket tool is compatible with Mercedes vehicles, the bush repair kit is not suitable
- YOU WILL RECEIVE: 1 x Steering Rack Socket, 1 x Bush repair kit equivalent to 32106891974, 1 x tube of steering grease equivalent to 83232208093
- Instruction Guide: https://youtu.be/aP4Idy046OA
- See more on Amazon...
Brand: X8R | Manufacturer: X8R
Warranty: 90 days
See On Amazon #8
X8R Pick Up Truck Hard Top Canopy Lock Black Hard Tops Fit 2 Keys Handle Pick-Up, Part # X8R0216
Asin: B0CP8C14FW | Model: X8R0216 | PartNumber: X8R0216 | Ean: 0880579269714 | UPC: 880579269714
The Solution: Install Our New Hard Top Handle For A Cost-Effective Fix Instead Of Purchasing A New Handle From The Manufacturer Of Your Hard Top (Which Can Be Very Pricey!), Purchase Our Universal Replacement Handle Instead. Our Replacement Handle Is Made Of High-Quality Materials Which Look Exactly Like The Oem Handles, For A Fraction Of The Price..
You Will Receive: 1 X Replacement Hard Top Handle Including The Following Components: Handle, Base, 2 X Keys, Gasket For Base, Gasket For Locating Stud, 30Mm Nut, Phillip's Head Screw, 2 X Washers, Spring, Spring Holding Plate, Spacer, Latch Locking Rod Plate. ***** Please Note We Do Not Sell These Components Separately, And Any Orders Returned With Components Missing Will Not Be Refunded..
Instruction Guide: 1) Https://Www.Youtube.Com/Embed/Jotmk8shmxc?Rel=0 2) X8r.Co.Uk/Mwdownloads/Download/Link/Id/168.
Vehicles Affected: This Is A Universal Replacement Handle Which Will Fit Any Hardtop Which Does Not Have A Recessed Handle (For Example, This Will Not Fit Snugtop Canopies). It Fits Brands Such As: Carryboy, Sjs, Adventurer, At Avenger, Aeroklas, And Other Hardtops Built From Factory For Navara, L200 Etc. ***** The Length Of The Handle Itself Does Not Matter; The Important Measurement Is The Distance Between The Sections Of The Handle That Slot Into The Glass/Tailgate Hatch. The Measurement Between This Section Is 82Mm. For All Measurements, Please See The Guide In The Images Of This Listing..
Symptoms Of Fault: Original Key No Longer Working, Loose Handle, No Longer Locking The Hatch ***** The Fault: It Is Very Common For Individual Components Within The Handle To Fail, Or Keys To Be Lost. Hard Top Handles Often Need Replacing Due To A Single Component Within The Mechanism Failing, Such As The Spring Or The Lock Cylinder. Or The Handle Might Need Replacing Due To Losing The Keys..
Features
- X8R Pick Up Truck Hard Top Canopy Lock Black Hard Tops Fit 2 Keys Handle Pick-Up, Part # X8R0216
- SYMPTOMS OF FAULT: Original key no longer working, loose handle, no longer locking the hatch ***** THE FAULT: It is very common for individual components within the handle to fail, or keys to be lost. Hard top handles often need replacing due to a single component within the mechanism failing, such as the spring or the lock cylinder. Or the handle might need replacing due to losing the keys.
- THE SOLUTION: Install our new hard top handle for a cost-effective fix Instead of purchasing a new handle from the manufacturer of your hard top (which can be very pricey!), purchase our universal replacement handle instead. Our replacement handle is made of high-quality materials which look exactly like the OEM handles, for a fraction of the price.
- VEHICLES AFFECTED: This is a universal replacement handle which will fit any hardtop which does not have a recessed handle (for example, this will not fit Snugtop Canopies). It fits brands such as: Carryboy, SJS, Adventurer, AT Avenger, Aeroklas, And other hardtops built from factory for Navara, L200 etc. ***** The length of the handle itself does not matter; the important measurement is the distance between the sections of the handle that slot into the glass/tailgate hatch. The measurement between this section is 82mm. For all measurements, please see the guide in the images of this listing.
- YOU WILL RECEIVE: 1 x Replacement Hard Top Handle including the following components: Handle, Base, 2 x Keys, Gasket for Base, Gasket for Locating Stud, 30mm Nut, Phillip's Head Screw, 2 x Washers, Spring, Spring Holding Plate, Spacer, Latch Locking Rod Plate. ***** Please note we do NOT sell these components separately, and any orders returned with components missing will not be refunded.
- Instruction Guide: 1) https://www.youtube.com/embed/JOTmk8shMxc?rel=0 2) x8r.co.uk/mwdownloads/download/link/id/168
- See more on Amazon...
Brand: X8R | Manufacturer: X8R
Dimensions: 1.00 x 1.00 x 1.00 inches
See On Amazon #9
X8R ABC Hydraulic Valve Block Solenoid Oil Seal Repair Fix Rebuild Kit Compatible With Mercedes Benz Part: X8R0147
Asin: B07HRZS9D2 | Ean: 0691034427613 | UPC: 691034427613
Vehicles Affected: C215 Cl Class 2000-2006 : Cl500, Cl600, Cl55 Amg, Cl63 Amg, Cl65 Amg. C216 Cl Class 2006+ : Cl500, Cl600, Cl55 Amg, Cl63 Amg, Cl65 Amg. R230 Sl Class 2003-2012 : Sl320, Sl500, Sl550, Sl55 Amg, Sl600, Sl65 Amg. W220 S Class 1998-2006: S280, S320, S350, S430, S500, S600, S55 Amg, S65 Amg. W221 S Class 2005-2013 : S280, S300, S350, S400, S450, S500, S550, S600, S63 Amg, S65 Amg..
In Around 2007 The Design Of The Valve Block Changed, Our Repair Kit Fits The Design Previous To The Change In 2007. The Later Valves Don’T Tend To Fail In The Same Way. If Your Valve Block Has Been Changed In Its Life It Is Possible It Was Changed To The Newer Version. To Determine If You Have The Newer Model The Abc Pump Can Be Inspected On The Upper Right Side Of The Engine; If A Black Sphere Is Attached To The Pump It Is The 2007+ Model..
The Solution: A Full Overhaul Kit To Repair The Abc Valve, Constructed Of The Finest Materials To Last The Life Of The Vehicle. Our Complete Overhaul Kit Includes All Components Required To Restore The Valve Block. Our Kit Is For One Valve Block. All Components Are Labelled For Easy Install. Please Check Out Our Picture Instructions And Videos To See Our Comprehensive Repair Kit In Action. Designed And Engineered To Resolve Abc Valve Faults For The Life Of The Vehicle..
Features
- SYMPTOMS OF FAULT: Car sagged, dropped, lower, down, lowered, at one or more corner after short period of time after vehicle shut off. Vehicle raised at one corner after shutting off. Common fault codes: Too Low warning on dash, C1525-001, C1525-002, C1525-004 or C1525-00. THE FAULT: Vehicle sags on one or more corner after shut off
- THE SOLUTION: A full overhaul kit to repair the ABC valve, constructed of the finest materials to last the life of the vehicle. Our complete overhaul kit includes all components required to restore the valve block. Our kit is for one valve block. All components are labelled for easy install. Please check out our picture instructions and videos to see our comprehensive repair kit in action. Designed and engineered to resolve ABC valve faults for the life of the vehicle.
- VEHICLES AFFECTED: C215 CL Class 2000-2006 : CL500, CL600, CL55 AMG, CL63 AMG, CL65 AMG. C216 CL Class 2006+ : CL500, CL600, CL55 AMG, CL63 AMG, CL65 AMG. R230 SL Class 2003-2012 : SL320, SL500, SL550, SL55 AMG, SL600, SL65 AMG. W220 S Class 1998-2006: S280, S320, S350, S430, S500, S600, S55 AMG, S65 AMG. W221 S Class 2005-2013 : S280, S300, S350, S400, S450, S500, S550, S600, S63 AMG, S65 AMG.
- In around 2007 the design of the valve block changed, our repair kit fits the design previous to the change in 2007. The later valves don t tend to fail in the same way. If your valve block has been changed in its life it is possible it was changed to the newer version. To determine if you have the newer model the ABC pump can be inspected on the upper right side of the engine; If a black sphere is attached to the pump it is the 2007+ model.
- See more on Amazon...
Brand: X8R | Manufacturer: X8R
See On Amazon #10
X8R EAS AIR Suspension Valve Block VITON O-Rings Repair FIX KIT Compatible with Land Rover P38 Between 1995-2002 Production Models with EAS Part# X8R12
Asin: B00ZVGP2II | Model: X8R12 | PartNumber: X8R12
The Solution: Fit Our Improved Material O-Rings And Restore Your Eas System To Full Health. Fit Our Viton O-Rings And Cure Those Leaks, Importantly Our O-Rings Are Made From Viton 75, This Material Is Suitable For The Elevated And Varing Temperature Range Which The Valve Block Endures. Viton Rubber Also Has Extremely Good Wear Resistance Far Outlasting Silicone And Buna O-Rings. Beware Of Cheap Kits With Silicone And Buna O-Rings We Only Ever Use Viton..
Features
- THE CAUSE: The O-rings and diaphragm seal within your vehicles EAS valve block system can wear causing the symptoms noted above. The O rings and or diaphragm wearing can lead to the compressor overworking and can cause complete EAS falure, we always recommend replacing the diaphragm seal when replacing the o-rings in the valve block as both can cause leaks and EAS failure.
- THE SOLUTION: Fit our improved material O-rings and restore your EAS system to full health. Fit our Viton O-rings and cure those leaks, importantly our O-rings are made from Viton 75, this material is suitable for the elevated and varing temperature range which the valve block endures. Viton rubber also has extremely good wear resistance far outlasting Silicone and Buna O-rings. Beware of cheap kits with Silicone and Buna O-rings we only ever use Viton.
- See more on Amazon...
Brand: X8R | Manufacturer: X8R
See On Amazon #11
X8R HITACHI AIR SUSPENSION COMPRESSOR PISTON SEAL & FILTER DRYER REPAIR REBUILD KIT COMPATIBLE WITH LAND ROVER LR3 DISCOVERY 3 2005-2009 PART # X8R44
Asin: B01GXGS29K | Ean: 4893433196619
Full Filter Replacement Kit To Allow You To Replace All Filters And Drying Beads Within The Drier Unit, The Original Filters Saturate Quickly And Drastically Effect Output, Our Improved Replacements Will Solve This Problem. This Kit Includes A New Improved Design Dyer End Cap, Re-Designed And Engineered To Not Fail Again. A Simple Straight Swap For The Old Dryer End Cap. Made From Billet Aluminium With A Viton Seal To Provide A Perfect Long Lasting Seal With The Dryer Canister..
The Solution: Fit Our Improved Design Dryer End Cap, Piston Seal, Glide Seal And Filter Kit And Restore Your Compressor To Full Health. Our Complete Kit Includes All Needed To Restore Your Compressor To Full Health. Our Kit Includes A New Improved Design Glide Ring And Piston Ring, Constructed To The Finest Of Tolerances From Improved Materials To Restore Full Output. Also Included Is Two Custom Tools To Allow Easy Replacement Of These Seals..
Features
- Is your vehicles air suspension rising slowly, noisily, or perhaps failing to rise at all? EAS Amber light lit? Fault code C1A20, C1A1364, C50, or C1A20-64 showing? One or more of these errors: Suspension error only normal height available Suspension fault; pressure not rising quick enough Or Pressure does not decrease when venting gallery ? VEHICLES AFFECTED: Discovery MK 3 (LR3) 2005-2009 Discovery MK 4 (LR4) 2010-2012 Range Rover Sport 2005-2013 Range Rover L322 2006-2009
- THE SOLUTION: Fit our improved design dryer end cap, piston seal, glide seal and filter kit and restore your compressor to full health. Our complete kit includes all needed to restore your compressor to full health. Our kit includes a new improved design glide ring and piston ring, constructed to the finest of tolerances from improved materials to restore full output. Also included is two custom tools to allow easy replacement of these seals.
- Full filter replacement kit to allow you to replace all filters and drying beads within the drier unit, the original filters saturate quickly and drastically effect output, our improved replacements will solve this problem. This kit includes a new improved design dyer end cap, re-designed and engineered to not fail again. A simple straight swap for the old dryer end cap. Made from billet aluminium with a Viton seal to provide a perfect long lasting seal with the dryer canister.
- See more on Amazon...
Brand: X8R | Manufacturer: X8R
See On Amazon #12
X8R Seat Bushes Bushings Fix Worn Rocking 2 seats Repair Compatible With BMW Z3 Z3M E36 E37 E38 1994-2002 Roadster/Coupe Z3M M Roadster M Coupe Part X8R0070
Asin: B01J4DZ87S | Ean: 4893443100408
Vehicles Affected: All Z3 Models Z3 E36 E37 E38 1994-2002 Roadster And Coupe Z3m M Roadster M Coupe Associated Part Numbers: 52108401291, 52108401292, 52108399593, 52108398812, 52107137499. You Will Receive: Our Repair Kit Includes: 8 Bushes To Repair 2X Seats; Drivers And Passengers..
Features
- The problem: The seat rail bushings wear; causing excessive seat movement. The poor quality rubber bushes within the seats sub frame tracks wear, perish or completely disintegrate and ultimately fail causing excess movement in the rails. This causes the symptoms noted above. This is a very common fault with all Z3 models. OEM replacement bushes if fitted would just fail again as these are also made from a poor quality rubber not suited to the application.
- Vehicles Affected: All Z3 models Z3 E36 E37 E38 1994-2002 Roadster and Coupe Z3M M Roadster M Coupe Associated part numbers: 52108401291, 52108401292, 52108399593, 52108398812, 52107137499. You will receive: Our repair kit includes: 8 bushes to repair 2x seats; drivers and passengers.
- See more on Amazon...
Brand: X8R | Manufacturer: X8R
See On Amazon #13
X8R Rubber Jacking Point Jack Pad Adaptor Tool Compatible with BMW 7 Series F01 F02 F03 F04 G11 G12, Part # X8R0093
Asin: B01MZ982R4 | Model: X8R0093 | PartNumber: X8R0093 | Ean: 0747180984729 | UPC: 747180984729
Vehicles Affected And Part Numbers This Part Is Compatible With Most Vehicles With A Jacking Point On The Sill / Rocker Panel / Pinch Weld. Please Check The Dimensions Of Our Part Below To Confirm If Compatible With Your Vehicle.
This Data Is Correct To Our Knowledge, Please Inspect Your Jacking Points To Ensure Compatibility. Please Also Check Your Car Jack For Compatibility. Our Jacking Pads Dimensions Are As Below: Total Pad Height: 25Mm; Total Pad Diameter: 62Mm. Jacking Rectangle: L55mm, W30mm, H13mm..
Associated Part Numbers: 51717237195, 51717123311, 51718268885, 51717039760, 51712757938, 51717065919, 51717164761, 51717001650, 51717169981, 51717042974, 51717189259..
Features
- SYMPTOMS OF FAULT: Jacking point/s damaged, pinched, bent, indented, crushed or broken. THE SOLUTION: Our jacking pad fits directly in to the rectangle recess section on the BMW plastic jacking points, allowing you to lift the vehicle without damaging the jacking points. Our pad is superior in design; featuring a unique tread on the underside of the pad to limit slippage.
- Associated part numbers: 51717237195, 51717123311, 51718268885, 51717039760, 51712757938, 51717065919, 51717164761, 51717001650, 51717169981, 51717042974, 51717189259.
- VEHICLES AFFECTED AND PART NUMBERS THIS PART IS COMPATIBLE WITH MOST VEHICLES WITH A JACKING POINT ON THE SILL / ROCKER PANEL / PINCH WELD. PLEASE CHECK THE DIMENSIONS OF OUR PART BELOW TO CONFIRM IF COMPATIBLE WITH YOUR VEHICLE
- This data is correct to our knowledge, please inspect your jacking points to ensure compatibility. Please also check your car jack for compatibility. Our jacking pads dimensions are as below: Total Pad Height: 25mm; Total Pad Diameter: 62mm. Jacking Rectangle: L55mm, W30mm, H13mm.
- See more on Amazon...
Manufacturer: X8R
See On Amazon #14
X8R WABCO TYPE AIR SUSPENSION COMPRESSOR PISTON SEAL RING & DRYER ELEMENTS FILTRATION KIT COMPATIBLE WITH VOLKSWAGEN VW TOUAREG 2002-2010 X8R45/FILTER
Asin: B06XHBD7HG | Model: X8R45/FILTER | PartNumber: X8R45/FILTER | Ean: 0713012063818 | UPC: 713012063818
Compatible With Volkswagen Vw Touareg 2002-2010. This Kit Will Also Fit The Wabco Style Air Compressor Fitted To: Audi Allroad C5 Models 2000-2005 C6 Model 2006-2011 Audi A8, D3, 4E Models Between 2002-2010 Audi Q7 2005-2013 Bmw X5, E53 2000-2006 Bmw 5 Series E39 1997-2008 Bmw 7 Series, E65 Chassis 2002-2006 Jaguar Xj Series Models Between 2003-2010 Land Rover Discovery Ii Models Between 1998-2004 Land Rover Range Rover Mk 3 - L322 Between 2002-2005 Mercedes S Class 1998-2005 (W220) Mercedes E Class 2002-2009 (W211) Porsche Cayenne Models Between 2002-2010..
Instruction: 1) Https://Www.Youtube.Com/Watch?V=_Bwgap4zaqc&Feature=Player_Embedded.
Replacing The Piston Seal & Air Dryer Filtration Components Within Your Compressor Can Restore Air Flow Output, Replacing The Air Dryer Filtration Components Keeps Moisture Out Of The Vehicle Air Suspension System Potentially Avoiding Other Issues And At The Same Time Reduce The Demand Placed Upon The Piston Seal /Mechanical/Electrical Components On The Compressor. We Also Sell The Air Dryer Repair Kit On Its Own (Check Listings In Our Store)..
Features
- Noisy suspension? Is your vehicles air suspension rising slowly or perhaps failing to rise at all? Vehicle stuck at Level 1. Failing to progress through Levels 2,3,4. Suspension error light showing. Yellow suspension error light lit? Compatible with VolksWagen VW Touareg 2002-2010 Associated part numbers, our kit will only repair Wabco compressors. Official Compressor: 7L0 616 007 A/B/C/F/H, 7L0 698 007 D, 7L8 616 006 D Wabco: 415 403 302 0, 415 403 113 0.
- Replacing the piston seal & air dryer filtration components within your compressor can restore air flow output, replacing the air dryer filtration components keeps moisture out of the vehicle air suspension system potentially avoiding other issues and at the same time reduce the demand placed upon the piston seal /mechanical/electrical components on the compressor. We also sell the Air dryer repair kit on its own (check listings in our store).
- Compatible with VolksWagen VW Touareg 2002-2010. This kit will also fit the Wabco style air compressor fitted to: Audi Allroad C5 models 2000-2005 C6 model 2006-2011 Audi A8, D3, 4E models between 2002-2010 Audi Q7 2005-2013 BMW X5, E53 2000-2006 BMW 5 Series E39 1997-2008 BMW 7 series, E65 chassis 2002-2006 Jaguar XJ series models between 2003-2010 Land Rover Discovery II models between 1998-2004 Land Rover Range Rover MK 3 - L322 between 2002-2005 Mercedes S Class 1998-2005 (w220) Mercedes E Class 2002-2009 (w211) Porsche Cayenne models between 2002-2010.
- Instruction: 1) https://www.youtube.com/watch?v=_BwGaP4Zaqc&feature=player_embedded
- See more on Amazon...
Brand: X8R | Manufacturer: X8R
See On Amazon #15
X8R AIR SUSPENSION COMPRESSOR PISTON RING REPAIR KIT FOR WABCO TYPE COMPRESSOR COMPATIBLE WITH LAND ROVER RANGE ROVER FULL SIZE MODEL L322 2003-2005 WITH WABCO AIR SUSPENSION COMPRESSOR, PART# X8R45
Asin: B00SP4VH4Q | Model: X8R45 | PartNumber: X8R45
The Cause: The Piston Ring Within Your Vehicles Eas Air Compressor Is Worn Reducing Output Significantly. The Poor Quality Piston Ring Within Your Air Suspensions Compressor Wears Over Time Causing These Symptoms. The Piston Ring Within The Compressor Unit Of Your Air Suspension System Deteriorates Over Time, The Oem Piston Ring Is Made From A Soft Plastic That Wears Quickly, This Wear Substantially Reduces The Output Of Your Compressor Leading To Noisy, Slow Rising Or Non-Rising Suspension..
The Solution: Fit Our Improved Design Ptfe Piston Ring And Restore Your Compressor To Full Health! Simply Install Our Replacement Ptfe Piston Ring And Restore Your Compressor, Full Instructions Are Included To Guide You Through This Simple Process Which Should Take Under 30 Minutes. Our Item Is Made From Ptfe Which Has Far Superior Wear Resistance Compared To The Oem Part Providing A Permanent Fix To The Problems With Your Compressor..
Are You Driving An Affected Vehicle? Land Rover Range Rover Mk 3 - L322 Between 2002-2005 (See Our Other Listings For Later Models) Associated Part Numbers, Our Kit Will Only Repair Wabco Compressors. Official Compressor: Rqg500110 (Lr010375), Rqg500140 (Lr015089) Official Air Supply Unit: Rql000014 (37.22-6753864) Wabco: 415 403 300 0, 415 403 108 0..
Features
- X8R AIR SUSPENSION COMPRESSOR PISTON RING REPAIR KIT FOR WABCO TYPE COMPRESSOR COMPATIBLE WITH LAND ROVER RANGE ROVER FULL SIZE MODEL L322 2003-2005 WITH WABCO TYPE. Noisy suspension? Is your vehicles air suspension rising slowly or perhaps failing to rise at all? EAS Fault? Message center reporting 'Suspension Fault', followed by an additional message such as 'Normal Height Only'? Do not to drive above 25/35mph warning? C1A20 - pressure is increasing too slowly while the reservoir is filling?
- ARE YOU DRIVING AN AFFECTED VEHICLE? Land Rover Range Rover MK 3 - L322 between 2002-2005 (see our other listings for later models) Associated part numbers, our kit will only repair Wabco compressors. Official Compressor: RQG500110 (LR010375), RQG500140 (LR015089) Official Air Supply Unit: RQL000014 (37.22-6753864) Wabco: 415 403 300 0, 415 403 108 0.
- THE CAUSE: The piston ring within your vehicles EAS air compressor is worn reducing output significantly. The poor quality piston ring within your air suspensions compressor wears over time causing these symptoms. The piston ring within the compressor unit of your air suspension system deteriorates over time, the OEM piston ring is made from a soft plastic that wears quickly, this wear substantially reduces the output of your compressor leading to noisy, slow rising or non-rising suspension.
- THE SOLUTION: Fit our improved design PTFE piston ring and restore your compressor to full health! Simply install our replacement PTFE piston ring and restore your compressor, full instructions are included to guide you through this simple process which should take under 30 minutes. Our item is made from PTFE which has far superior wear resistance compared to the OEM part providing a permanent fix to the problems with your compressor.
- See more on Amazon...
Brand: X8R | Manufacturer: X8R
Weight: 0.25 pounds
See On Amazon #16
X8R DOUBLE TWIN DUAL VANOS REBUILD RESTORE RATTLE & SEALS SET KIT FIX COMPATIBLE WITH BMW 3 (E46) / 5 (E39)/ 7 SERIES (E38) / Z3 (E36) / Z4 (E85) / X3 (E83) X5 (E53) PART: X8R41
Asin: B07F9XXHWJ | Ean: 0691034427057 | UPC: 691034427057
Our Repair Kit Includes: 4X Replacement Seals And Wear Rings To Repair Both Pistons, 2X Improved Design And Material Viton O-Rings For Piston Caps, 1X Rtv Sealant For Resealing Valve Cover, 9X Replacement Bolts And Washers, 2X Rattle Rings..
Symptoms Of This Failure Include; Overall Loss Of Power And Torque Particularly In The Lower Rpm Range, Loss Of Power With Air Conditioning On, Rattling Sounds From The Vanos Unit, Louder Idle, Increased Fuel Consumption And Difficult Cold Weather Starts And Even Stalls. Install Our Upgraded Viton Seals, Ptfe Rings And Rattle Rings And Restore Your Vanos Unit To Full Health For Good. Designed To Last The Lifetime Of Your Vehicle Not The Length Of The Manufacturer's Warranty!.
Features
- Our repair kit in this listing addresses the common failure of the BMW Dual Vanos Unit. Our components described herein with the assistance of our supportive instruction media will allow you to replace just the faulty components with improved components without the need to replace the whole unit. An extremely common fault corrected by our repair kit.
- Symptoms of this failure include; overall loss of power and torque particularly in the lower RPM range, loss of power with air conditioning on, rattling sounds from the Vanos unit, louder idle, increased fuel consumption and difficult cold weather starts and even stalls. Install our upgraded Viton seals, PTFE rings and rattle rings and restore your Vanos unit to full health for good. Designed to last the lifetime of your vehicle not the length of the manufacturer's warranty!
- Our repair kit includes: 4x replacement seals and wear rings to repair both pistons, 2x improved design and material Viton O-rings for piston caps, 1x RTV sealant for resealing valve cover, 9x replacement bolts and washers, 2x rattle rings.
- See more on Amazon...
Brand: X8R | Manufacturer: X8R
See On Amazon #17
AIR SUSPENSION COMPRESSOR PISTON RING X8R45 FOR WABCO C2C27702 W0133-1939145, 78-10023 COMPATIBLE WITH JAGUAR XJ6 XJ8 XJR X350 X358
Asin: B06X17JW3R | Model: X8R45 | PartNumber: X8R45 | Ean: 0713012062910 | UPC: 713012062910
The Solution: Fit Our Improved Design Ptfe Piston Ring And Restore Your Compressor To Full Health! Imply Install Our Replacement Ptfe Piston Ring And Restore Your Compressor, Full Instructions Are Included To Guide You Through This Simple Process Which Should Take Under 30 Minutes. Our Item Is Made From Ptfe Which Has Far Superior Wear Resistance Compared To The Oem Part Providing A Permanent Fix To The Problems With Your Compressor..
Vehicles Affected: Jaguar Xj Series Models Between 2003-2010 Associated Part Numbers, Our Kit Will Only Repair Wabco Compressors. Compressor: C2c27702 Wabco: W0133-1939145, 78-10023 On.
Features
- JAGUAR XJ SERIES XJ6 / XJ8 / XJR / X350 / X358 WABCO AIR SUSPENSION COMPRESSOR PISTON RING REPAIR FIX KIT Noisy suspension? Is your vehicles air suspension rising slowly or perhaps failing to rise at all? The VTL (Vehicle Too Low) message displayed? Intermittent amber 'Air Suspension Fault' message? Red Light lit? C2302 , C2303- leveling or reservoir plausibility error?
- VEHICLES AFFECTED: Jaguar XJ series models between 2003-2010 Associated part numbers, our kit will only repair Wabco compressors. Compressor: C2C27702 Wabco: W0133-1939145, 78-10023 ON
- THE SOLUTION: Fit our improved design PTFE piston ring and restore your compressor to full health! imply install our replacement PTFE piston ring and restore your compressor, full instructions are included to guide you through this simple process which should take under 30 minutes. Our item is made from PTFE which has far superior wear resistance compared to the OEM part providing a permanent fix to the problems with your compressor.
- See more on Amazon...
Brand: X8R | Manufacturer: X8R
See On Amazon #18
X8R REPAIR KIT AIR SUSPENSION COMPRESSOR PISTON RING FIX COMPATIBLE WITH MERCEDES E CLASS W211 2002-2009 WITH WABCO A2113200304 415 403 303 0, 415 403 112 0 AIR SUSPENSION COMPRESSORS PART # X8R45
Asin: B00U559F9W | Ean: 4893433195575
The Cause: The Piston Ring Within Your Vehicles Eas Air Compressor Is Worn Reducing Output Significantly. The Poor Quality Piston Ring Within Your Air Suspensions Compressor Wears Over Time Causing These Symptoms. The Piston Ring Within The Compressor Unit Of Your Air Suspension System Deteriorates Over Time, The Oem Piston Ring Is Made From A Soft Plastic That Wears Quickly, This Wear Substantially Reduces The Output Of Your Compressor Leading To Noisy..
The Solution Fit Our Improved Design Ptfe Piston Ring And Restore Your Compressor To Full Health! Simply Install Our Replacement Ptfe Piston Ring And Restore Your Compressor, Full Instructions Are Included To Guide You Through This Simple Process Which Should Take Under 30 Minutes. Our Item Is Made From Ptfe Which Has Far Superior Wear Resistance Compared To The Oem Part Providing A Permanent Fix To The Problems With Your Compressor..
X8r Repair Kit Air Suspension Compressor Piston Ring Fix Compatible With Mercedes E Class W211 2002-2009 With Wabco A2113200304 415 403 303 0, 415 403 112 0 Compressors Part # X8r45.
Features
- Noisy suspension? Is your vehicles air suspension rising slowly or perhaps failing to rise at all? 'Air Suspension Issues' Red light lit? 'Stop. Car Too Low, 5503 - The car is taking too long to fill the central reservoir, 5505, 5508 - The system can't build up pressure?
- X8R REPAIR KIT AIR SUSPENSION COMPRESSOR PISTON RING FIX COMPATIBLE WITH MERCEDES E CLASS W211 2002-2009 WITH WABCO A2113200304 415 403 303 0, 415 403 112 0 COMPRESSORS PART # X8R45
- THE CAUSE: The piston ring within your vehicles EAS air compressor is worn reducing output significantly. The poor quality piston ring within your air suspensions compressor wears over time causing these symptoms. The piston ring within the compressor unit of your air suspension system deteriorates over time, the OEM piston ring is made from a soft plastic that wears quickly, this wear substantially reduces the output of your compressor leading to noisy.
- THE SOLUTION Fit our improved design PTFE piston ring and restore your compressor to full health! Simply install our replacement PTFE piston ring and restore your compressor, full instructions are included to guide you through this simple process which should take under 30 minutes. Our item is made from PTFE which has far superior wear resistance compared to the OEM part providing a permanent fix to the problems with your compressor.
- See more on Amazon...
Brand: X8R | Manufacturer: X8R
Dimensions: 2.00 x 2.00 x 1.00 inches | Weight: 0.25 pounds
See On Amazon #19
X8R Door Lock Latch Repair KIT Springs Set Compatible with Land Rover Discovery 1 / Range Rover Classic, Part # X8R10 / X8R0010
Asin: B00ZNO145I | Model: X8R10 | PartNumber: X8R10
The Solution: Fit Our Improved Design Stainless Steel Springs And Restore Your Door Locks To Full Health For Good. Simply Install Our Improved Design Replacement Springs And Restore Your Locks For Good, Full Instructions Are Included To Guide You Through This Process..
Will This Repair My Vehicles Door Locks ? Below Is A List Of The Models That Our Product Is Compatible With Models Affected: Discovery Mk 1 (200 + 300) 1989–1998, Range Rover Mk1 Classic 1970–1996 You Will Receive: - 5X Replacement Stainless Steel Improved Design Springs.
The Cause: The Poor Quality Springs Within Your Door Lock Mechanisms Wear And Can Even Snap Causing These Symptoms The Springs Within The Door Lock Actuator Mechanisms Deteriorate Over Time, The Oem Spring Is Made From Cheap Metal Which Wears Quickly, This Wear Leads To The Symptoms Noted Above. Luckily We Have The Solution...
Features
- Struggling to unlock your Land Rover? Turning the key and pulling the handle to open your doors? Or fed up of holding up the latch to open the doors?
- The Cause: The poor quality springs within your door lock mechanisms wear and can even snap causing these symptoms The Springs within the door lock actuator mechanisms deteriorate over time, the OEM spring is made from cheap metal which wears quickly, this wear leads to the symptoms noted above. Luckily we have THE solution..
- The Solution: Fit our improved design Stainless Steel springs and restore your door locks to full health for good. Simply install our improved design replacement springs and restore your locks for good, full instructions are included to guide you through this process.
- WILL THIS REPAIR MY VEHICLEs DOOR LOCKS ? Below is a list of the models that our product is compatible with Models Affected: Discovery MK 1 (200 + 300) 1989 1998, Range Rover MK1 Classic 1970 1996 You will receive: - 5x Replacement stainless steel improved design springs
- See more on Amazon...
Brand: X8R | Manufacturer: X8R
See On Amazon #20
X8R CP1 Bosch Common Rail Fuel Pump Seals Repair Kit Compatible with Mercedes Sprinter/ML 270 / CLK / C220 CDI Diesel Part: X8R0080
Asin: B07DQV3HMJ | Ean: 0691034426692 | UPC: 691034426692
Before Carrying Out The Repair Please Note: The Cp1 Fuel Pump Operates At Extremely High Pressures, More Than High Enough To Cause Serious Injury Or Death. Follow Your Vehicle Manufacturers Guidance On Depressurize The Fuel Pump Before Commencing Repair. The Repair Needs To Be Carried Out In An Ultra Clean Environment; Any Contaminates Greater Than 2 Micron (0.0002Mm) That Enter The Pump Or Pipework Can Cause Irreparable Damage To The Injector System..
Customers Have Noted Success In The Past Carrying Out The Repair Submersed In Pure And Filtered Diesel Using Latex Gloves To Handle The Components, With The Pump Being Thoroughly Flushed Through With Clean Diesel Before Being Refitted To The Vehicle. It Is The Customer’S Responsibility To Ensure A Sufficiently Clean Environment For This Repair..
You Will Receive: 3X Head Seal (Round) 3X Head Seal (Shaped) 3X Conical Seal 6X Fuel Galley Nylon Rings 6X Fuel Galley O-Ring Seals 2X Drive Shaft Orings 3X Small Head Seals Models: Mercedes 0445010008 / 0445010005 / 0445010013 / 0445010014 / 0445010015 / 0445010019 / 0445010024 / 0445010027 / 0445010030 / 0445010032 / 0445010070 / 0445010268 / 0445010004.
Features
- Product Description: Our replacement seals allow you to replace the faulty seals within your Bosch CP1 fuel pump, allowing you to cure leaks. Our components allow you to replace just the components that fail, allowing you to cure this common fault without the need to purchase a complete new pump.
- You will receive: 3x Head seal (round) 3x Head seal (shaped) 3x Conical seal 6x Fuel galley nylon rings 6x Fuel galley O-ring seals 2x Drive shaft orings 3x Small head seals Models: Mercedes 0445010008 / 0445010005 / 0445010013 / 0445010014 / 0445010015 / 0445010019 / 0445010024 / 0445010027 / 0445010030 / 0445010032 / 0445010070 / 0445010268 / 0445010004
- Before carrying out the repair please note: The CP1 fuel pump operates at extremely high pressures, more than high enough to cause serious injury or death. Follow your vehicle manufacturers guidance on depressurize the fuel pump before commencing repair. The repair needs to be carried out in an ultra clean environment; any contaminates greater than 2 micron (0.0002mm) that enter the pump or pipework can cause irreparable damage to the injector system.
- Customers have noted success in the past carrying out the repair submersed in pure and filtered diesel using latex gloves to handle the components, with the pump being thoroughly flushed through with clean diesel before being refitted to the vehicle. It is the customer s responsibility to ensure a sufficiently clean environment for this repair.
- See more on Amazon...
Brand: X8R | Manufacturer: X8R
Weight: 0.13 pounds
See On Amazon #21
X8R Eaton Supercharger Oil Service Kit with waterpump Compatible with Mini Cooper S R53 R52 JCW W11, Part # X8R0243
Asin: B0CP9Z41LB | Model: X8R0243 | PartNumber: X8R0243 | Ean: 0880544507537 | UPC: 880544507537
The Solution: Our Comprehensive Kit Includes All The Parts You Will Need To Carry Out A Full Service Of The Supercharger Off Of The Vehicle. We Recommend Removing The Supercharger From The Vehicle To Service, We Believe This Is The Most Thorough Way, All Our Components Included Here Allow You To Do This Replacing All Consumables, Gaskets And Parts Which Will Likely Need Replacing Along The Way. We Recommend Refilling The Supercharger Off Of The Vehicle Through The Drain Plugs, We Don’T Advocate Removing Any Of The Casting Of The Supercharger As We Feel This Is More Likely To Introduce Contaminates..
X2 Viton O-Rings To Replace 11517509186 On Water Pump And Water Pump Flange. X1 Viton O-Ring To Replace Seal On The Crank Position Sensor 12147514983. X1 60Ml Syringe With Long Filler Pipe. X1 Dipstick Crank Case Bung Plug. X2 Bolts And Washers For Radiator Removal. X1 Dip Stick Tube O-Ring. Equivalent To 11437513891. X1 Throttle Body Gasket Equivalent To 13547509045. X1 Replacement Oem Quality Water Pump (Magneti Marelli) Equivalent To 11517520123..
Instruction Guide: 1) X8r.Co.Uk/Mwdownloads/Download/Link/Id/196 2) Https://Www.Youtube.Com/Embed/3Gn2-Frynjy?Rel=0.
You Will Receive: X2 Viton O Rings For Supercharger Drain Plugs. X1 Green Supercharger To Air Tube Gasket (Vitor Reinz) Equivalent To 11610020836. X1 Valve Pipe (Ash) Equivalent To 17511524538 Or 17517541463. With X2 Slim Stainless Steel Hose Clamps (To Replace 11651521321). X3 Slim Stainless Steel Hose Clamps To Replace 13721491752. X1 Large Inlet Horn Gasket (Elring) To Replace 17511520044. X1 Intake Manifold Housing Gasket For The Supercharger. Equivalent To 17511524319..
Compatible With Bmw Mini Cooper S R53 2000- 2006 (Inc Jcw Models). Compatible With Bmw Mini Cooper S Convertible R52 2002-2008..
Symptoms Of Fault: This Is A Preventative Service Kit To Avoid Future Failure Of The Supercharger And Water Pump Components. The Fault: Scheduled Servicing Of The Supercharger And Water Pump Is Important To Keep In The Best Condition And To Prevent Failure..
Features
- X8R Eaton Supercharger Service Kit with waterpump Compatible with Mini Cooper S R53 R52 JCW W11, Part # X8R0243
- SYMPTOMS OF FAULT: This is a preventative service kit to avoid future failure of the supercharger and water pump components. THE FAULT: Scheduled servicing of the supercharger and water pump is important to keep in the best condition and to prevent failure.
- THE SOLUTION: Our comprehensive kit includes all the parts you will need to carry out a full service of the supercharger off of the vehicle. We recommend removing the supercharger from the vehicle to service, we believe this is the most thorough way, all our components included here allow you to do this replacing all consumables, gaskets and parts which will likely need replacing along the way. We recommend refilling the supercharger off of the vehicle through the drain plugs, we don t advocate removing any of the casting of the supercharger as we feel this is more likely to introduce contaminates.
- Compatible with BMW MINI Cooper S R53 2000- 2006 (Inc JCW models). Compatible with BMW MINI Cooper S Convertible R52 2002-2008.
- Instruction Guide: 1) x8r.co.uk/mwdownloads/download/link/id/196 2) https://www.youtube.com/embed/3gn2-FrYnJY?rel=0
- YOU WILL RECEIVE: X2 Viton O Rings for supercharger drain plugs. X1 Green supercharger to air tube gasket (Vitor Reinz) equivalent to 11610020836. X1 Valve pipe (ASH) equivalent to 17511524538 or 17517541463. With X2 slim Stainless steel hose clamps (to replace 11651521321). X3 Slim stainless steel hose clamps to replace 13721491752. X1 Large inlet horn gasket (Elring) to replace 17511520044. X1 Intake manifold housing gasket for the supercharger. Equivalent to 17511524319.
- X2 Viton O-rings to replace 11517509186 on water pump and water pump flange. X1 Viton O-ring to replace seal on the crank position sensor 12147514983. X1 60ml syringe with long filler pipe. X1 Dipstick crank case bung plug. X2 Bolts and washers for radiator removal. X1 Dip stick tube O-ring. Equivalent to 11437513891. X1 Throttle body gasket equivalent to 13547509045. X1 Replacement OEM quality water pump (Magneti Marelli) Equivalent to 11517520123.
- See more on Amazon...
Brand: X8R | Manufacturer: X8R
Weight: 4.00 pounds
Warranty: 3 months
See On Amazon #22
X8R Eaton SCharger Service Kit Waterpump Aux Tensioner Tool Compatible with Mini R52 R53, Part # X8R0242
Asin: B0CP9XP8WH | Model: X8R0242 | PartNumber: X8R0242 | Ean: 0880811401308 | UPC: 880811401308
The Solution: Our Comprehensive Kit Includes All The Parts You Will Need To Carry Out A Full Service Of The Scharger Off Of The Vehicle. We Recommend Removing The Scharger From The Vehicle To Service, We Believe This Is The Most Thorough Way, All Our Components Included Here Allow You To Do This Replacing All Consumables, Gaskets And Parts Which Will Likely Need Replacing Along The Way. We Recommend Refilling The Scharger Off Of The Vehicle Through The Drain Plugs, We Don’T Advocate Removing Any Of The Casting Of The Scharger As We Feel This Is More Likely To Introduce Contaminates..
Instruction Guide: 1) X8r.Co.Uk/Mwdownloads/Download/Link/Id/209 2) Https://Www.Youtube.Com/Embed/3Gn2-Frynjy?Rel=0.
You Will Receive: X2 Viton O Rings For Scharger Drain Plugs. X1 Green Scharger To Air Tube Gasket (Vitor Reinz) Equivalent To 11610020836. X1 Valve Pipe (Ash) Equivalent To 17511524538 Or 17517541463. With X2 Slim Stainless Steel Hose Clamps (To Replace 11651521321). X3 Slim Stainless Steel Hose Clamps To Replace 13721491752. X1 Large Inlet Horn Gasket (Elring) To Replace 17511520044. X1 Intake Manifold Housing Gasket For The Scharger. Equivalent To 17511524319..
X2 Viton O-Rings To Replace 11517509186 On Water Pump And Water Pump Flange. X1 Viton O-Ring To Replace Seal On The Crank Position Sensor 12147514983. X1 60Ml Syringe With Long Filler Pipe. X1 3/16 Af Long Arm Allen Key. X1 Dipstick Crank Case Bung Plug. X2 Bolts And Washers For Radiator Removal. X1 Dip Stick Tube O-Ring. Equivalent To 11437513891. X1 Throttle Body Gasket Equivalent To 13547509045. X1 X8r Auxiliary Belt Changing Tool Kit (Including Pin Locking Tool). X1 Replacement Oem Quality Water Pump (Magneti Marelli) Equivalent To 11517520123..
Compatible With Bmw Mini Cooper S R53 2000- 2006 (Inc Jcw Models). Compatible With Bmw Mini Cooper S Convertible R52 2002-2008..
Symptoms Of Fault: This Is A Preventative Service Kit To Avoid Future Failure Of The Scharger And Water Pump Components. The Fault: Scheduled Servicing Of The Scharger And Water Pump Is Important To Keep In The Best Condition And To Prevent Failure..
Features
- X8R Eaton SCharger Service Kit Waterpump Aux Tensioner Tool Compatible with Mini R52 R53, Part # X8R0242
- SYMPTOMS OF FAULT: This is a preventative service kit to avoid future failure of the SCharger and water pump components. THE FAULT: Scheduled servicing of the SCharger and water pump is important to keep in the best condition and to prevent failure.
- THE SOLUTION: Our comprehensive kit includes all the parts you will need to carry out a full service of the SCharger off of the vehicle. We recommend removing the SCharger from the vehicle to service, we believe this is the most thorough way, all our components included here allow you to do this replacing all consumables, gaskets and parts which will likely need replacing along the way. We recommend refilling the SCharger off of the vehicle through the drain plugs, we don t advocate removing any of the casting of the SCharger as we feel this is more likely to introduce contaminates.
- Compatible with BMW MINI Cooper S R53 2000- 2006 (Inc JCW models). Compatible with BMW MINI Cooper S Convertible R52 2002-2008.
- YOU WILL RECEIVE: X2 Viton O Rings for SCharger drain plugs. X1 Green SCharger to air tube gasket (Vitor Reinz) equivalent to 11610020836. X1 Valve pipe (ASH) equivalent to 17511524538 or 17517541463. With X2 slim Stainless steel hose clamps (to replace 11651521321). X3 Slim stainless steel hose clamps to replace 13721491752. X1 Large inlet horn gasket (Elring) to replace 17511520044. X1 Intake manifold housing gasket for the SCharger. Equivalent to 17511524319.
- X2 Viton O-rings to replace 11517509186 on water pump and water pump flange. X1 Viton O-ring to replace seal on the crank position sensor 12147514983. X1 60ml syringe with long filler pipe. X1 3/16 AF long arm Allen key. X1 Dipstick crank case bung plug. X2 Bolts and washers for radiator removal. X1 Dip stick tube O-ring. Equivalent to 11437513891. X1 Throttle body gasket equivalent to 13547509045. X1 X8R Auxiliary Belt Changing Tool Kit (including pin locking tool). X1 Replacement OEM quality water pump (Magneti Marelli) Equivalent to 11517520123.
- Instruction Guide: 1) x8r.co.uk/mwdownloads/download/link/id/209 2) https://www.youtube.com/embed/3gn2-FrYnJY?rel=0
- See more on Amazon...
Brand: X8R | Manufacturer: X8R
Warranty: 3 months
See On Amazon #23
X8R Essential Kingpin Bearings and Swivel Seal REFURBISHMENT KIT Compatible with Suzuki JIMNY, Part # X8R0234
Asin: B0CNHCL17Z | Ean: 0880151654945 | UPC: 880151654945
The Solution: This Kit Comprises Of All The Components You Need To Refurbish One Side Of Your Front Axel (For Both Sides, Purchase Two Kits)..
You Will Receive: - 1 X Swivel Seal. Genuine, 45120-81A04. (Note A04 Ending, This Is The Latest Best Version); - 2 X Kingpin Bearings. Koyo Brand, This Is The Same As Suzuki Uses From New. 09265-15006; - 8 X Swivel Seal Bolts. To Replace Rusted Originals; - 8 X Kingpin Bolts And Lock Washers. To Replace Rusted Originals; - 1 X Driveshaft Oil Seal. Oem Equivalent, 09283-26016 Double Lipped, Best Design And Dimensions..
Instruction Guide: 1) Youtube.Com/Embed/Fxrmbh8zvjs?Rel=0 2) X8r.Co.Uk/Mwdownloads/Download/Link/Id/188.
Compatible With Suzuki Jimny 1998-2018 (Jb23/Jb33/Jb43/Jb53). Associated Part Numbers: Kingpins – 45610-63002, Bearings – 09265-15006, Swivel Seal – 45120-81A04, Oil Seal – 09283-26016.
Symptoms Of Fault: Steering “Shimmy” Aka “Death Wobble” The Steering Wheel Shaking Usually Around 35-45Mph (60-80Mk/H), Can Be Anything From A Slight Shake To A Violent Steering Wheel Shake. Oil/Grease Leaking From The Swivel Joints. Vertical Play In Front Wheels When Hovering Above Ground. ***** The Fault: The Bearings And Gaskets Fail Over Time Causing Water Ingress And Potential Mot Failure.
Features
- X8R ESSENTIAL KINGPIN BEARINGS AND SWIVEL SEAL REFURBISHMENT KIT COMPATIBLE WITH SUZUKI JIMNY, PART # X8R0234
- SYMPTOMS OF FAULT: Steering shimmy AKA death wobble the steering wheel shaking usually around 35-45mph (60-80mk/h), can be anything from a slight shake to a violent steering wheel shake. Oil/grease leaking from the swivel joints. Vertical play in front wheels when hovering above ground. ***** THE FAULT: The bearings and gaskets fail over time causing water ingress and potential MOT failure
- THE SOLUTION: This kit comprises of all the components you need to refurbish one side of your front axel (for both sides, purchase two kits).
- Compatible with Suzuki Jimny 1998-2018 (JB23/JB33/JB43/JB53). Associated part numbers: Kingpins 45610-63002, Bearings 09265-15006, Swivel seal 45120-81A04, Oil seal 09283-26016
- YOU WILL RECEIVE: - 1 x Swivel Seal. Genuine, 45120-81A04. (note A04 ending, this is the latest best version); - 2 x Kingpin Bearings. KOYO brand, this is the same as Suzuki uses from New. 09265-15006; - 8 x Swivel Seal Bolts. To replace rusted originals; - 8 x Kingpin Bolts and lock washers. To replace rusted originals; - 1 x Driveshaft Oil Seal. OEM equivalent, 09283-26016 double lipped, best design and dimensions.
- Instruction Guide: 1) youtube.com/embed/fXrmbH8ZvJs?rel=0 2) x8r.co.uk/mwdownloads/download/link/id/188
- See more on Amazon...
Brand: X8R | Manufacturer: X8R
See On Amazon #24
X8R Kingpin Front Axel Swivel Joint Bearings Seal REFURBISHMENT KIT Compatible with Suzuki JIMNY, Part # X8R0233
Asin: B0CNHBWDGX | Ean: 0880402736413 | UPC: 880402736413
The Fault: The Bearings And Gaskets Fail Over Time Causing Water Ingress And Potential Mot Failure ***** The Solution: This Kit Comprises Of All The Components You Need To Refurbish One Side Of Your Front Axel (For Both Sides, Purchase Two Kits)..
Instruction Guide: 1) Youtube.Com/Embed/Fxrmbh8zvjs?Rel=0 2) X8r.Co.Uk/Mwdownloads/Download/Link/Id/188.
You Will Receive: - 1 X Swivel Seal. Genuine, 45120-81A04. (Note A04 Ending, This Is The Latest Best Version); - 2 X Kingpin Bearings. Koyo Brand, This Is The Same As Suzuki Uses From New. 09265-15006; - 2 X Kingpins. Oe Quality. 45610-63002, - 1 X Driveshaft Oil Seal. Oem Equivalent, 09283-26016 Double Lipped, Best Design And Dimensions; - 1 X Circlip For The Driveshaft. To Replace Rusted Original;.
- 2 X Vacuum Line Bungs. To Prevent Contaminants Entering The System; - 2 X Vacuum Hose Plugs. To Prevent Contaminants Entering The System; - 1 X 454G Maxima Waterproof Grease. Best Grease For The Job, As Recommended On Owners Forums; - Rtv Sealant. To Seal Around Kingpins To Prevent Water Ingress; - 2 X Disc Locating Bolts. To Allow Easier Removal Of Stuck On Brake Discs; - 8 X Swivel Seal Bolts. To Replace Rusted Originals; - 8 X Kingpin Bolts And Lock Washers. To Replace Rusted Originals.
Compatible With Suzuki Jimny 1998-2018 (Jb23/Jb33/Jb43/Jb53). Associated Part Numbers: Kingpins – 45610-63002, Bearings – 09265-15006, Swivel Seal – 45120-81A04, Oil Seal – 09283-26016.
Symptoms Of Fault: Steering “Shimmy” Aka “Death Wobble” The Steering Wheel Shaking Usually Around 35-45Mph (60-80Mk/H), Can Be Anything From A Slight Shake To A Violent Steering Wheel Shake. Oil/Grease Leaking From The Swivel Joints. Vertical Play In Front Wheels When Hovering Above Ground..
Features
- X8R KINGPIN FRONT AXEL SWIVEL JOINT BEARINGS SEAL REFURBISHMENT KIT COMPATIBLE WITH SUZUKI JIMNY, PART # X8R0233
- SYMPTOMS OF FAULT: Steering shimmy AKA death wobble the steering wheel shaking usually around 35-45mph (60-80mk/h), can be anything from a slight shake to a violent steering wheel shake. Oil/grease leaking from the swivel joints. Vertical play in front wheels when hovering above ground.
- THE FAULT: The bearings and gaskets fail over time causing water ingress and potential MOT failure ***** THE SOLUTION: This kit comprises of all the components you need to refurbish one side of your front axel (for both sides, purchase two kits).
- Compatible with Suzuki Jimny 1998-2018 (JB23/JB33/JB43/JB53). Associated part numbers: Kingpins 45610-63002, Bearings 09265-15006, Swivel seal 45120-81A04, Oil seal 09283-26016
- YOU WILL RECEIVE: - 1 x Swivel Seal. Genuine, 45120-81A04. (note A04 ending, this is the latest best version); - 2 x Kingpin Bearings. KOYO brand, this is the same as Suzuki uses from New. 09265-15006; - 2 x Kingpins. OE quality. 45610-63002, - 1 x Driveshaft Oil Seal. OEM equivalent, 09283-26016 double lipped, best design and dimensions; - 1 x Circlip for the Driveshaft. To replace rusted original;
- - 2 x Vacuum Line Bungs. To prevent Contaminants entering the system; - 2 X Vacuum Hose Plugs. To prevent Contaminants entering the system; - 1 x 454g Maxima Waterproof Grease. Best grease for the job, as recommended on owners forums; - RTV sealant. To seal around kingpins to prevent water ingress; - 2 x Disc Locating Bolts. To allow easier removal of stuck on brake discs; - 8 x Swivel Seal Bolts. To replace rusted originals; - 8 x Kingpin Bolts and lock washers. To replace rusted originals
- Instruction Guide: 1) youtube.com/embed/fXrmbH8ZvJs?rel=0 2) x8r.co.uk/mwdownloads/download/link/id/188
- See more on Amazon...
Brand: X8R | Manufacturer: X8R
See On Amazon #25
X8R Eaton Supercharger Oil Service Kit Waterpump Compatible with Mini Cooper S R53 R52 JCW W11, Part # X8R0244
Asin: B0CP9ZG8TS | Model: X8R0244 | PartNumber: X8R0244 | Ean: 0880753556289 | UPC: 880753556289
The Solution: Our Kit Includes All Of The Parts Necessary For Renewing The Basic Components On Youe Supercharged Mini. We Recommend Removing The Supercharger From The Vehicle To Service, We Believe This Is The Most Thorough Way, All Our Components Included Here Allow You To Do This Replacing All Consumables, Gaskets And Parts Which Will Likely Need Replacing Along The Way. We Recommend Refilling The Supercharger Off Of The Vehicle Through The Drain Plugs, We Don’T Advocate Removing Any Of The Casting Of The Supercharger As We Feel This Is More Likely To Introduce Contaminates..
Instruction Guide: 1) X8r.Co.Uk/Mwdownloads/Download/Link/Id/198 2) Https://Www.Youtube.Com/Embed/3Gn2-Frynjy?Rel=0.
You Will Receive: X2 Viton O Rings For Supercharger Drain Plugs. X1 Green Supercharger To Air Tube Gasket (Vitor Reinz) Equivalent To 11610020836. X1 Large Inlet Horn Gasket (Elring) To Replace 17511520044. X1 Intake Manifold Housing Gasket For The Supercharger. Equivalent To 17511524319. X2 Viton O-Rings To Replace 11517509186 On Water Pump And Water Pump Flange. X1 Viton O-Ring To Replace Seal On The Crank Position Sensor 12147514983. X1 60Ml Syringe With Long Filler Pipe. X1 3/16 Af Long Arm Allen Key. X1 Dip Stick Tube O-Ring. Equivalent To 11437513891. X1 Throttle Body Gasket Equivalent To 13547509045. X1 Replacement Oem Quality Water Pump (Magneti Marelli) Equivalent To 11517520123..
Compatible With Bmw Mini Cooper S R53 2000- 2006 (Inc Jcw Models). Compatible With Bmw Mini Cooper S Convertible R52 2002-2008..
Symptoms Of Fault: This Is A Preventative Service Kit To Avoid Future Failure Of The Supercharger And Water Pump Components. The Fault: Scheduled Servicing Of The Supercharger And Water Pump Is Important To Keep In The Best Condition And To Prevent Failure..
Features
- X8R Eaton Supercharger Oil Service Kit Waterpump Compatible with Mini Cooper S R53 R52 JCW W11, Part # X8R0244
- SYMPTOMS OF FAULT: This is a preventative service kit to avoid future failure of the supercharger and water pump components. THE FAULT: Scheduled servicing of the supercharger and water pump is important to keep in the best condition and to prevent failure.
- THE SOLUTION: Our kit includes all of the parts necessary for renewing the basic components on youe supercharged Mini. We recommend removing the supercharger from the vehicle to service, we believe this is the most thorough way, all our components included here allow you to do this replacing all consumables, gaskets and parts which will likely need replacing along the way. We recommend refilling the supercharger off of the vehicle through the drain plugs, we don t advocate removing any of the casting of the supercharger as we feel this is more likely to introduce contaminates.
- Compatible with BMW MINI Cooper S R53 2000- 2006 (Inc JCW models). Compatible with BMW MINI Cooper S Convertible R52 2002-2008.
- Instruction Guide: 1) x8r.co.uk/mwdownloads/download/link/id/198 2) https://www.youtube.com/embed/3gn2-FrYnJY?rel=0
- YOU WILL RECEIVE: X2 Viton O Rings for supercharger drain plugs. X1 Green supercharger to air tube gasket (Vitor Reinz) equivalent to 11610020836. X1 Large inlet horn gasket (Elring) to replace 17511520044. X1 Intake manifold housing gasket for the supercharger. Equivalent to 17511524319. X2 Viton O-rings to replace 11517509186 on water pump and water pump flange. X1 Viton O-ring to replace seal on the crank position sensor 12147514983. X1 60ml syringe with long filler pipe. X1 3/16 AF long arm Allen key. X1 Dip stick tube O-ring. Equivalent to 11437513891. X1 Throttle body gasket equivalent to 13547509045. X1 Replacement OEM quality water pump (Magneti Marelli) Equivalent to 11517520123.
- See more on Amazon...
Brand: X8R | Manufacturer: X8R
Warranty: 3 months
See On Amazon #26
X8R Side & Rear Door Combo Kit Plate Shield Security Guard Compatible with Ford Custom 2012-Onwards, Part # X8R0262
Asin: B0CP9WCL26 | Model: X8R0262 | PartNumber: X8R0262 | Ean: 0880786109001 | UPC: 880786109001
It Is Very Common For Criminals To Attempt Break-Ins On These Vans By Drilling A Hole Through The Side And Rear Door To Access The Internal Mechanisms Of The Lock And Open The Door, Thus Being Able To Take Whatever Is Stored In The Back Of The Van. A Common Deterrent Against Criminals Would Be An Alarm System, However The Alarm Will Only Be Triggered Once The Criminals Are Already Inside Of The Van. The Solution: This X8r Kit Contains Everything You Need To Repair A Past Break-In, As Well As Pro.
You Will Receive: Side Door Kit Contains: 1 X Left Hand Door Brushed Stainless Steel Exterior Protective Shield, 1 X X8r Green Powder Coated Stainless Steel Interior Protective Shield, 1 X Closed Cell Foam Gasket, 1 X Paper Template, 9 X Stainless Steel Nyloc Nuts, 9 X Stainless Steel Washers..
Rear Door Kit Contains: 1 X Rear Door Brushed Stainless Steel Exterior Shield, 1 X X8r Green Powder Coated Stainless Steel Interior Protective Shield, 1 X Closed Cell Foam Gasket, 1 X Paper Template, 10 X Stainless Steel Nyloc Nuts, 10 X Stainless Steel Washers..
Our Shields Come With A Closed Cell Foam Gasket Which Sits Flush Between The Door & The Exterior Shield, Creating A Water-Tight Protective Barrier To Prevent Rust And Corrosion. *** Template Included To Allow Accurate Drilling And Easier Install. Please Also Check Out Our Comprehensive Instruction Document And Install Video. *** High Quality Brushed Stainless Steel Finish..
Compatible With Ford Custom 2012 Onwards. *** Please Note That This Kit Is Only Applicable For The Left Hand Door (Near Side) ***** Instruction Guide: 1) X8r.Co.Uk/Mwdownloads/Download/Link/Id/218 2) X8r.Co.Uk/Mwdownloads/Download/Link/Id/220 3) Https://Www.Youtube.Com/Embed/Gqsb-V3sq2e?Rel=0 4) Https://Www.Youtube.Com/Embed/Oue_Fwrqazu?Rel=0.
The Solution: This X8r Kit Contains Everything You Need To Repair A Past Break-In, As Well As Protect It From Future Attacks. This Comprehensive Kit Will Deter Thieves From Breaking Into Your Vehicle By Adding Two Extra Layers Of Protection To Your Door. Our Kit Is Also Suitable If Your Van Has Been Previously Drilled In To. *** Our External And Internal Shields Are Both Made From 2.5Mm Stainless Steel. Adding 5Mm Stainless Steel Protection, The Skin Of Most Oem Doors Is Little Over 1Mm Thick!.
Symptoms Of Fault: If You Have Already Had A Break-In Attempt Made On Your Van Then It Is Likely You Will Have A Hole Drilled In The Door Of Your Vehicle, This Is Done To Allow Criminals To Reach Inside And Simply Unlock Your Van From The Internal Mechanism. The Fault: The Oem Door Locking Mechanism Is Easily Bypassed By Criminals..
Features
- X8R Side & Rear Door Combo Kit Plate Shield Security Guard Compatible with Ford Custom 2012-Onwards, Part # X8R0262
- SYMPTOMS OF FAULT: If you have already had a break-in attempt made on your van then it is likely you will have a hole drilled in the door of your vehicle, this is done to allow criminals to reach inside and simply unlock your van from the internal mechanism. THE FAULT: The OEM door locking mechanism is easily bypassed by criminals.
- It is very common for criminals to attempt break-ins on these vans by drilling a hole through the side and rear door to access the internal mechanisms of the lock and open the door, thus being able to take whatever is stored in the back of the van. A common deterrent against criminals would be an alarm system, however the alarm will only be triggered once the criminals are already inside of the van. THE SOLUTION: This X8R kit contains everything you need to repair a past break-in, as well as pro
- THE SOLUTION: This X8R kit contains everything you need to repair a past break-in, as well as protect it from future attacks. This comprehensive kit will deter thieves from breaking into your vehicle by adding two extra layers of protection to your door. Our kit is also suitable if your van has been previously drilled in to. *** Our external and internal shields are both made from 2.5mm stainless steel. Adding 5mm stainless steel protection, the skin of most OEM doors is little over 1mm thick!
- Our shields come with a closed cell foam gasket which sits flush between the door & the exterior shield, creating a water-tight protective barrier to prevent rust and corrosion. *** Template included to allow accurate drilling and easier install. Please also check out our comprehensive instruction document and install video. *** High quality brushed stainless steel finish.
- COMPATIBLE WITH Ford Custom 2012 Onwards. *** Please note that this kit is only applicable for the left hand door (near side) ***** Instruction Guide: 1) x8r.co.uk/mwdownloads/download/link/id/218 2) x8r.co.uk/mwdownloads/download/link/id/220 3) https://www.youtube.com/embed/GqSB-v3SQ2E?rel=0 4) https://www.youtube.com/embed/OUE_fWrqAZU?rel=0
- YOU WILL RECEIVE: Side door kit contains: 1 x Left hand door brushed stainless steel exterior protective shield, 1 x X8R green powder coated stainless steel interior protective shield, 1 x Closed cell foam gasket, 1 x Paper template, 9 x Stainless steel nyloc Nuts, 9 x Stainless steel washers.
- Rear door kit contains: 1 x Rear door brushed stainless steel exterior shield, 1 x X8R green powder coated stainless steel interior protective shield, 1 x Closed cell foam gasket, 1 x Paper template, 10 x Stainless steel Nyloc nuts, 10 x Stainless steel washers.
- See more on Amazon...
Brand: X8R | Manufacturer: X8R
Warranty: 3 months
See On Amazon #27
X8R N/S Sliding Door Theft Shield Security Guard Plate Kit Compatible with Ford Transit Custom 2012- Onwards, Part # X8R0259
Asin: B0CP8JX1V6 | Model: X8R0259 | PartNumber: X8R0259 | Ean: 0880295454845 | UPC: 880295454845
A Common Deterrent Against Criminals Would Be An Alarm System, However The Alarm Will Only Be Triggered Once The Criminals Are Already Inside Of The Van. Having A Visible Guard On Show Will Send A Message To Any Prospecting Criminals. *** The Solution: This X8r Kit Contains Everything You Need To Repair A Past Break-In, As Well As Protect It From Future Attacks. This Comprehensive Kit Will Deter Thieves From Breaking Into Your Vehicle By Adding Two Extra Layers Of Protection To Your Door..
Instruction Guide: 1) Https://Www.Youtube.Com/Embed/Oue_Fwrqazu?Rel=0 2) X8r.Co.Uk/Mwdownloads/Download/Link/Id/220.
Template Included To Allow Accurate Drilling And Easier Install. Please Also Check Out Our Comprehensive Instruction Document And Install Video. *** High Quality Brushed Stainless Steel Finish..
Compatible With Ford Transit Custom 2012 Onwards. Please Note That This Kit Is Only Applicable For The Left Hand Door (Near Side) ***** You Will Receive: 1 X Left Hand Door Brushed Stainless Steel Exterior Protective Shield, 1 X X8r Green Powder Coated Stainless Steel Interior Protective Shield, 1 X Closed Cell Foam Gasket, 1 X Paper Template, 9 X Stainless Steel Nyloc Nuts, 9 X Stainless Steel Washers..
Our Kit Is Also Suitable If Your Van Has Been Previously Drilled In To. *** Our External And Internal Shields Are Both Made From 2.5Mm Stainless Steel. Adding 5Mm Stainless Steel Protection, The Skin Of Most Oem Doors Is Little Over 1Mm Thick! *** Our Shields Come With A Closed Cell Foam Gasket Which Sits Flush Between The Door & The Exterior Shield, Creating A Water-Tight Protective Barrier To Prevent Rust And Corrosion..
The Fault: The Oem Door Locking Mechanism Is Easily Bypassed By Criminals. It Is Very Common For Criminals To Attempt Break-Ins On These Vans By Drilling A Hole Through The Side Door To Access The Internal Mechanisms Of The Lock And Open The Door, Thus Being Able To Take Whatever Is Stored In The Back Of The Van. If Your Van Has Been Broken Into You Would Be Required To Replace The Whole Door, Which Can Often Prove Expensive And Time Consuming, Especially If You Need To Respray The New Door..
Features
- X8R N/S Sliding Door Theft Shield Security Guard Plate Kit Compatible with Ford Transit Custom 2012- Onwards, Part # X8R0259
- THE FAULT: The OEM door locking mechanism is easily bypassed by criminals. It is very common for criminals to attempt break-ins on these vans by drilling a hole through the side door to access the internal mechanisms of the lock and open the door, thus being able to take whatever is stored in the back of the van. If your van has been broken into you would be required to replace the whole door, which can often prove expensive and time consuming, especially if you need to respray the new door.
- A common deterrent against criminals would be an alarm system, however the alarm will only be triggered once the criminals are already inside of the van. Having a visible guard on show will send a message to any prospecting criminals. *** THE SOLUTION: This X8R kit contains everything you need to repair a past break-in, as well as protect it from future attacks. This comprehensive kit will deter thieves from breaking into your vehicle by adding two extra layers of protection to your door.
- Our kit is also suitable if your van has been previously drilled in to. *** Our external and internal shields are both made from 2.5mm stainless steel. Adding 5mm stainless steel protection, the skin of most OEM doors is little over 1mm thick! *** Our shields come with a closed cell foam gasket which sits flush between the door & the exterior shield, creating a water-tight protective barrier to prevent rust and corrosion.
- Template included to allow accurate drilling and easier install. Please also check out our comprehensive instruction document and install video. *** High quality brushed stainless steel finish.
- COMPATIBLE WITH Ford Transit Custom 2012 Onwards. Please note that this kit is only applicable for the left hand door (near side) ***** YOU WILL RECEIVE: 1 x Left hand door brushed stainless steel exterior protective shield, 1 x X8R green powder coated stainless steel interior protective shield, 1 x Closed cell foam gasket, 1 x Paper template, 9 x Stainless steel nyloc Nuts, 9 x Stainless steel washers.
- Instruction Guide: 1) https://www.youtube.com/embed/OUE_fWrqAZU?rel=0 2) x8r.co.uk/mwdownloads/download/link/id/220
- See more on Amazon...
Brand: X8R | Manufacturer: X8R
Warranty: 3 months
See On Amazon #28
X8R Rear Door Drill Repair Shield Protector Guard Plate Doors Compatible with Ford Custom 2012, Part # X8R0258
Asin: B0CP8HDPHD | Model: X8R0258 | PartNumber: X8R0258 | Ean: 0880297619082 | UPC: 880297619082
A Common Deterrent Against Criminals Would Be An Alarm System, However The Alarm Will Only Be Triggered Once The Criminals Are Already Inside Of The Van. Having A Visible Guard On Show Will Send A Message To Any Prospecting Criminals. ***** The Solution: This X8r Kit Contains Everything You Need To Repair A Past Break-In, As Well As Protect It From Future Attacks. Rather Than Replace Your Door Or Install An Expensive Alarm System, Install The X8r Door Lock Shield Kit..
Instruction Guide: 1) Www.Youtube.Com/Embed/Gqsb-V3sq2e?Rel=0 2) X8r.Co.Uk/Mwdownloads/Download/Link/Id/218.
Our Shields Come With A Closed Cell Foam Gasket Which Sits Flush Between The Door & The Exterior Shield, Creating A Water-Tight Protective Barrier To Prevent Rust And Corrosion. *** Template Included To Allow Accurate Drilling And Easier Install. Please Also Check Out Our Comprehensive Instruction Document And Install Video. *** High Quality Brushed Stainless Steel Finish..
Compatible With Ford Custom 2012 Onwards ***** You Will Receive: 1 X Rear Door Brushed Stainless Steel Exterior Shield, 1 X X8r Green Powder Coated Stainless Steel Interior Protective Shield, 1 X Closed Cell Foam Gasket, 1 X Paper Template, 10 X Stainless Steel Nyloc Nuts, 10 X Stainless Steel Washers..
This Comprehensive Kit Will Deter Thieves From Breaking Into Your Vehicle By Adding Two Extra Layers Of Protection To Your Door. Our Kit Is Also Suitable If Your Van Has Been Previously Drilled In To. ***** Our External And Internal Shields Are Both Made From 2.5Mm Stainless Steel. Adding 5Mm Stainless Steel Protection, The Skin Of Most Oem Doors Is Little Over 1Mm Thick!.
The Fault: The Oem Door Locking Mechanism Is Easily Bypassed By Criminals. It Is Very Common For Criminals To Attempt Break-Ins On These Vans By Drilling A Hole Through The Rear Door To Access The Internal Mechanisms Of The Lock And Open The Door, Thus Being Able To Take Whatever Is Stored In The Back Of The Van. If Your Van Has Been Broken Into You Would Be Required To Replace The Whole Door, Which Can Often Prove Expensive And Time Consuming, Especially If You Need To Respray The New Door..
Features
- X8R Rear Door Drill Repair Shield Protector Guard Plate Doors Compatible with Ford Custom 2012, Part # X8R0258
- THE FAULT: The OEM door locking mechanism is easily bypassed by criminals. It is very common for criminals to attempt break-ins on these vans by drilling a hole through the rear door to access the internal mechanisms of the lock and open the door, thus being able to take whatever is stored in the back of the van. If your van has been broken into you would be required to replace the whole door, which can often prove expensive and time consuming, especially if you need to respray the new door.
- A common deterrent against criminals would be an alarm system, however the alarm will only be triggered once the criminals are already inside of the van. Having a visible guard on show will send a message to any prospecting criminals. ***** THE SOLUTION: This X8R kit contains everything you need to repair a past break-in, as well as protect it from future attacks. Rather than replace your door or install an expensive alarm system, install the X8R Door Lock Shield Kit.
- This comprehensive kit will deter thieves from breaking into your vehicle by adding two extra layers of protection to your door. Our kit is also suitable if your van has been previously drilled in to. ***** Our external and internal shields are both made from 2.5mm stainless steel. Adding 5mm stainless steel protection, the skin of most OEM doors is little over 1mm thick!
- Our shields come with a closed cell foam gasket which sits flush between the door & the exterior shield, creating a water-tight protective barrier to prevent rust and corrosion. *** Template included to allow accurate drilling and easier install. Please also check out our comprehensive instruction document and install video. *** High quality brushed stainless steel finish.
- COMPATIBLE WITH Ford Custom 2012 Onwards ***** YOU WILL RECEIVE: 1 x Rear door brushed stainless steel exterior shield, 1 x X8R green powder coated stainless steel interior protective shield, 1 x Closed cell foam gasket, 1 x Paper template, 10 x Stainless steel Nyloc nuts, 10 x Stainless steel washers.
- Instruction Guide: 1) www.youtube.com/embed/GqSB-v3SQ2E?rel=0 2) x8r.co.uk/mwdownloads/download/link/id/218
- See more on Amazon...
Brand: X8R | Manufacturer: X8R
Warranty: 3 months
See On Amazon #29
X8R Dummy False Van Door Anti Theft Deterrent Protection Security Kit Deadlock Locks, Part # X8R0210
Asin: B0CP89VJ6G | Model: X8R0210 | PartNumber: X8R0210 | Ean: 0880183209601 | UPC: 880183209601
The Solution: Our New And Improved Dummy Door Lock Is Machined From A Security Key Cylinder, Giving It The Appearance Of A Genuine High Security Key Barrel From The Front. We Utilise The Same Original Black Plastic Surround As Complete Lock Mechanisms. We Use Real Rivets, Riveted In Place With A Rivet Gun To Look Totally Authentic. The Main Lock Section Is A Machined Down Security Lock, All This Adds Up To The Lock Looking Totally Authentic..
Instruction Guide: 1) Https://Www.Youtube.Com/Embed/N2tx-Fcc3ka?Rel=0 ***** 2) X8r.Co.Uk/Mwdownloads/Download/Link/Id/169.
Vehicles Affected: Mostly Vans, Lorries And Truck Owners Are Affected By The Common Problem Of Having Their Vehicles Broken Into, But This Universal Dummy Lock Can Be Fitted To Any Vehicle, Including Caravans, Motorhomes, Passenger Vehicles Etc..
You Will Receive: 2 X X8r Dummy Security Door Locks, 2 X Alcohol Wipe.
Utilising Genuine 3M Branded Very High Bond (Vhb) Automotive Grade Weather Proof Sticky Tape Our Dummy Lock Can Be Stuck On To Your Vehicle In Minutes. No Drilling, No Tools Required, Just Stick In Place. Our Item Comes Complete With A 100% Alcohol Wipe To Clean The Surface Prior To Fitting. *** Please Note This Is A Dummy Lock, It Is A Visual Deterrent Only..
The Fault: Unfortunately, It Is Becoming More & More Common For Vehicles To Be Broken Into, Especially Vans Since They Often Carry Expensive Tools And Machinery. Thieves Will Often Drill Into Doors To Access Oem Locks To Open Them From The Inside, Leaving The Owner With A Damaged Vehicle And No Tools, Thus An Expensive Bill..
Features
- X8R Dummy False Van Door Anti Theft Deterrent Protection Security Kit Deadlock Locks, Part # X8R0210
- THE FAULT: Unfortunately, it is becoming more & more common for vehicles to be broken into, especially vans since they often carry expensive tools and machinery. Thieves will often drill into doors to access OEM locks to open them from the inside, leaving the owner with a damaged vehicle and no tools, thus an expensive bill.
- THE SOLUTION: Our new and improved dummy door lock is machined from a security key cylinder, giving it the appearance of a genuine high security key barrel from the front. We utilise the same original black plastic surround as complete lock mechanisms. We use real rivets, riveted in place with a rivet gun to look totally authentic. The main lock section is a machined down security lock, all this adds up to the lock looking totally authentic.
- Utilising genuine 3M branded Very High Bond (VHB) automotive grade weather proof sticky tape our dummy lock can be stuck on to your vehicle in minutes. No drilling, no tools required, just stick in place. Our item comes complete with a 100% alcohol wipe to clean the surface prior to fitting. *** Please note this is a dummy lock, it is a visual deterrent only.
- VEHICLES AFFECTED: Mostly vans, lorries and truck owners are affected by the common problem of having their vehicles broken into, but this universal dummy lock can be fitted to any vehicle, including caravans, motorhomes, passenger vehicles etc.
- YOU WILL RECEIVE: 2 x X8R Dummy Security Door Locks, 2 x Alcohol Wipe
- Instruction Guide: 1) https://www.youtube.com/embed/n2Tx-fcc3kA?rel=0 ***** 2) x8r.co.uk/mwdownloads/download/link/id/169
- See more on Amazon...
Brand: X8R | Manufacturer: X8R
Dimensions: 1.00 x 10.00 x 8.00 inches
See On Amazon