XS Scuba - Buying Guide
Last Updated: 05/09/2024
Share on
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional. #1
XS Scuba Kp04 Neoprene Knife Holder
Asin: B002OF2AQG | Ean: 0779205883205 | UPC: 779205883205
Neoprene Construction With Slip-Resistant Backing.
Adds Soft Cushioned Layer Between Leg And Hard Sheath.
Adjustable Velcro Straps For Mounting To Lower Leg.
Convenient Way To Hold Your Knife Sheath.
Features
- XS Scuba Neoprene Knife Wrap( KNIFE IS NOT INCLUDED )
- Convenient Way to Hold your Knife Sheath
- Neoprene Construction with Slip-Resistant Backing
- Adjustable Velcro Straps for Mounting to Lower Leg
- Adds Soft Cushioned Layer between Leg and Hard Sheath
- See more on Amazon...
Brand: XS Scuba | Manufacturer: XS Scuba
Dimensions: 0.60 x 9.10 x 8.60 inches | Weight: 0.10 pounds
See On Amazon #2
XS Scuba Spandex Socks - Black
Asin: B016XJ7FTA | Model: BT100BK | PartNumber: BT100BK | Ean: 0638170930416 | UPC: 638170930416
8 Ounce, Four-Way Stretch Spandex.
One Size Fits Most.
Made With Overlock Stitching.
Reduce Foot Discomfort With Full Foot Fins.
Features
- Take the effort out of putting on your wetsuit & boots
- Reduce foot discomfort with full foot fins
- 8 ounce, four-way stretch spandex
- Made with overlock stitching
- One size fits most
- See more on Amazon...
Brand: XS Scuba | Manufacturer: XS Scuba
Dimensions: 2.00 x 5.00 x 4.00 inches | Weight: 0.05 pounds
See On Amazon #3
XS Scuba Quick Launch Marker Buoy - Orange
Asin: B08P3YJVR4 | Ean: 0649823895938 | UPC: 649823895938
Spool Line Is Attached To D-Ring Inside The Pocket.
Solas Reflective Tape On Both Sides.
Combination Oral And Qd Hose Inflation.
Over-Pressure Relief Valve With Pull Cord.
Open Bottom With Anti-Spill Baffle.
Lower Pocket Includes A Spool With 100 Ft (30 M) Of Line.
Features
- 6 ft (183 cm) length/large 12 in (30.5 cm) circumference
- Lower pocket includes a spool with 100 ft (30 m) of line
- Spool line is attached to D-ring inside the pocket
- Open bottom with anti-spill baffle
- Combination oral and QD hose inflation
- Over-pressure relief valve with pull cord
- SOLAS reflective tape on both sides
- See more on Amazon...
Brand: XS Scuba | Manufacturer: XS Scuba
Dimensions: 3.50 x 5.40 x 5.20 Inches
See On Amazon #4
XS Scuba Scuba Tank Holder
Asin: B06XRRP5DJ | Model: SG_B06XRRP5DJ_US | PartNumber: SG_B06XRRP5DJ_US | Ean: 0640671581899, 0649823890933 | UPC: 640671581899, 649823890933
Each Base Can Be Mounted Directly To Any Hard Surface Using The Six Stainless Steel Screws (Included) Or Using An Optional Aluminum Rail.
The Bases Are Interlocking So You Can Connect As Many Together As Needed.
Features
- The silicone band can be mounted on either the left or the right side of the base so that you can pull it over your tank in either direction
- The bases are interlocking so you can connect as many together as needed
- Each base can be mounted directly to any hard surface using the six stainless steel screws (included) or using an optional aluminum rail
- See more on Amazon...
Brand: XS Scuba | Manufacturer: XS Scuba
Dimensions: 2.56 x 10.63 x 2.44 Inches
See On Amazon #5
XS Scuba Standard Spin-On Yoke - Chrome
Asin: B004NX8UIY | Model: SG_B004NX8UIY_US | PartNumber: SG_B004NX8UIY_US | Ean: 0649823910655 | UPC: 649823910655
All Brass Construction.
Fits All 200 To 300 Bar Din Valves.
Features
- Convert a DIN connection to a yoke connection
- Fits all 200 to 300 bar DIN valves
- All brass construction
- See more on Amazon...
Brand: XS Scuba | Manufacturer: XS Scuba
Weight: 0.70 pounds
See On Amazon #6
XS Scuba Miflex High Pressure Carbon HD Hoses - 6"
Asin: B00DY8IXA4 | Model: MHP06-CN | PartNumber: MHP06-CN | Ean: 8000041001501
Graphite Carbon Hose Color.
Braided Nylon Exterior Layer.
Less Than 8 Mm Diameter.
7/16” X 20 Male Threads With Strain Relief With Shock Absorber And Green Viton O-Ring.
Features
- 7/16 x 20 female threads with strain relief with shock absorber and 14 mm deep airspool well
- 7/16 x 20 male threads with strain relief with shock absorber and green Viton O-ring
- Graphite carbon hose color
- Less than 8 mm diameter
- Braided nylon exterior layer
- See more on Amazon...
Brand: XS Scuba | Manufacturer: XS Scuba
Dimensions: 0.04 x 6.00 x 0.43 Inches
See On Amazon #7
XS Scuba Travel Wetsuit Hanger - Blue
Asin: B0026KTWP6 | Model: AC530BU | PartNumber: AC530BU | Ean: 0638170930683 | UPC: 638170930683
Two Additional Folding Arms For Accessories.
Tough X-Beam Design.
Swivel Attachment Hook.
Broad Arms To Support The Shoulders Of Wetsuit.
Features
- Unique folding design is ideal for travel
- Broad arms to support the shoulders of wetsuit
- Two additional folding arms for accessories
- Swivel attachment hook
- Tough X-beam design
- See more on Amazon...
Brand: XS Scuba | Manufacturer: XS Scuba
Dimensions: 2.80 x 5.40 x 8.40 Inches | Weight: 0.00 Pounds
See On Amazon #8
SeaDive Eagleye RayBlocker HD Mask with Purge
Asin: B016625UP0 | Model: SG_B016625UP0_US | PartNumber: SG_B016625UP0_US | Ean: 0053532009539 | UPC: 053532009539
The Single Lens Provides An Unobstructed Field Of View.
Plastic Box With Lid Included.
Fog Resistant Coating.
Our Most Popular Rayblocker Model!.
Features
- Purge Valve
- Our most popular RayBlocker model!
- The single lens provides an unobstructed field of view
- Fog resistant coating
- Plastic box with lid included
- See more on Amazon...
Brand: SeaDive | Manufacturer: XS Scuba
Weight: 1.00 pounds
See On Amazon #9
XS Scuba Shot Diving Weight White 5 LB
Asin: B002OF2FYS | Model: SG_B002OF2FYS_US | PartNumber: SG_B002OF2FYS_US
Larger #4 Shot With Less Surface Area.
Heavy-Duty Nylon Mesh Bags.
Hardened With Antimony.
No Scrap Lead Used.
Features
- Newly Manufactured Lead Shot
- No Scrap Lead Used
- Larger #4 Shot with Less Surface Area
- Hardened with Antimony
- Heavy-Duty Nylon Mesh Bags
- See more on Amazon...
Brand: XS Scuba | Manufacturer: XS Scuba
Weight: 5.00 Pounds
See On Amazon #10
XS Scuba 7.25" Aluminum Cylinder Boot - Octagon
Asin: B0000DYNWU
Octagon Rim Design To Prevent Side Rolling.
Self-Draining And Durable.
Features
- High quality injection-molded construction
- Self-draining and durable
- Octagon rim design to prevent side rolling
- See more on Amazon...
Brand: XS Scuba | Manufacturer: XS Scuba
Dimensions: 4.00 x 8.50 x 8.50 Inches
See On Amazon #11
XS Scuba Travel BC Hanger - Black
Asin: B000E6CTHW | Model: rtgfh-39 | PartNumber: rtgfh-39 | Ean: 0638170930706 | UPC: 638170930706
Two Additional Folding Arms For Accessories.
Tough X-Beam Design.
Swivel Attachment Hook.
Large Hooks To Retain The Shoulders Of Bc.
Features
- Unique folding design is ideal for travel
- Large hooks to retain the shoulders of BC
- Two additional folding arms for accessories
- Swivel attachment hook
- Tough X-beam design
- See more on Amazon...
Brand: XS Scuba | Manufacturer: XS Scuba
Dimensions: 6.25 x 15.75 x 8.00 inches | Weight: 0.75 pounds
See On Amazon #12
XS Scuba Rattle Stick with Clip
Asin: B00B65QRB4 | Ean: 0638170930249 | UPC: 638170930249
Build In Attachment Clip.
Cap With Magnet To Prevent Unwanted Sound.
Give It A Shake To Get Your Buddies Attention.
Features
- Nice and loud underwater sound
- Give it a shake to get your buddies attention
- Build in attachment clip
- Cap with magnet to prevent unwanted sound
- See more on Amazon...
Brand: XS Scuba | Manufacturer: XS Scuba
Dimensions: 0.10 x 6.10 x 2.40 Inches | Weight: 0.00 Pounds
See On Amazon #13
XS Scuba Protective Mask Wrap - Black
Asin: B0000DYLM6 | Model: BG540BK | PartNumber: BG540BK | Ean: 0649823892975, 0751738810019 | UPC: 751738810019, 649823892975
Easy Access, Top Opening With Hook-And-Loop Strips.
Mesh Vent Front Panel For Quick Drying.
Innovative Design Allows The Snorkel To Remain Attached.
Fully Padded Construction With Plush Interior.
Features
- Protect your expensive mask
- Fully padded construction with plush interior
- Easy access, top opening with hook-and-loop strips
- Innovative design allows the snorkel to remain attached
- Mesh vent front panel for quick drying
- See more on Amazon...
Brand: XS Scuba | Manufacturer: XS Scuba
Dimensions: 3.50 x 8.00 x 5.00 inches | Weight: 1.00 Pounds
Warranty: XS Scuba warrants to the original owner that all of its products are free of defects in materials and workmanship for a period of two years with proof of purchase.
See On Amazon #14
XS Scuba Deluxe Cylinder Equalizer with Braided HP Hose
Asin: B00A7R8PSA | Ean: 0649823892012 | UPC: 649823892012
Gauge Boot Included - Snug Fitting, Silicone Compound For Protection Of Gauge.
Braided Hp Hose Length: 60 In (152 Cm).
Attaches To K, Pro And Din Valves.
Easy Replacement Bleed Screw.
Braided Hp Hose Thin Diameter: 0.32 In (8 Mm).
Stainless Steel Twist Bleed Screw With Positive Seal Pdvf Seat.
Combo Attachment Includes Two Spin On Yoke Adapters.
Dual Scale: 0 To 5000 Psi And 0 To 350 Bar.
Features
- Easy read 2.75 in (69.8 mm) diameter gauge with stainless steel case
- Dual scale: 0 to 5000 psi and 0 to 350 bar
- Gauge boot included - snug fitting, silicone compound for protection of gauge
- Stainless steel twist bleed screw with positive seal PDVF seat
- Easy replacement bleed screw
- Braided HP hose thin diameter: 0.32 in (8 mm)
- Braided HP hose length: 60 in (152 cm)
- Attaches to K, PRO and DIN valves
- Combo attachment includes two spin on yoke adapters
- See more on Amazon...
Brand: XS Scuba | Manufacturer: XS Scuba
Dimensions: 12.20 x 2.70 x 7.60 Inches | Weight: 3.46 Pounds
See On Amazon #15
XS Scuba X5 Accessory Hanger - Blue
Asin: B000T3Z382 | Model: AC500BU | PartNumber: AC500BU | Ean: 0640671582346 | UPC: 640671582346
Lays Flat For Travel By Removing Crossbar.
Dimensions: 16.25 X 17.75 X 5.25 In (41.2 X 45 X 13.5 Cm).
Tough X-Beam Design.
Removable Crossbar To Hang Mask & Snorkel.
Features
- Drain, dry and store in one place
- Removable crossbar to hang mask & snorkel
- Lays flat for travel by removing crossbar
- Tough X-beam design
- Dimensions: 16.25 x 17.75 x 5.25 in (41.2 x 45 x 13.5 cm)
- See more on Amazon...
Brand: XS Scuba | Manufacturer: XS Scuba
Dimensions: 5.25 x 16.25 x 17.75 Inches | Weight: 0.85 pounds
See On Amazon #16
Highland Original Weight Plates
Asin: B093VJMG56 | Ean: 0649823896508 | UPC: 649823896508
Recommended For 1, 2, 3 And 4 Lb Blocks Of Lead.
Numerous Pyramid Anchor Points Bite Into The Webbing To Keep The Plate Securely In Place.
Plate Is Molded From Rugged Glass-Filled Nylon For Maximum Durability.
Features
- Includes 2 plates and 4 pieces of green bungee
- Plate is molded from rugged glass-filled nylon for maximum durability
- Recommended for 1, 2, 3 and 4 lb blocks of lead
- Numerous pyramid anchor points bite into the webbing to keep the plate securely in place
- See more on Amazon...
Brand: XS Scuba | Manufacturer: XS Scuba
Dimensions: 1.70 x 3.00 x 3.00 inches | Weight: 0.20 pounds
See On Amazon #17
XS Scuba HP Splitter
Asin: B00HYPKNX8 | Model: AC906 | PartNumber: AC906 | Ean: 0649823893897 | UPC: 649823893897
High Pressure Only - Maximum 5000 Psi.
(1) 7/16”-20 Male Inlet To (2) 7/16”-20 Female Outlets.
Cleaned For Use With Up To 40% Pre-Blended Nitrox.
Chromed Brass Construction With Viton O-Rings.
Features
- Use this to add an additional high pressure port to your regulator s first stage
- Chromed brass construction with Viton O-rings
- High pressure only - maximum 5000 psi
- Cleaned for use with up to 40% pre-blended Nitrox
- (1) 7/16 -20 male inlet to (2) 7/16 -20 female outlets
- See more on Amazon...
Brand: XS Scuba | Manufacturer: XS Scuba
Dimensions: 0.50 x 1.90 x 1.80 Inches | Weight: 0.30 Pounds
See On Amazon #18
XS Scuba BC Washout Hose
Asin: B002YGJNQA | Model: TL112 | PartNumber: TL112 | Ean: 0751738223673 | UPC: 751738223673
Give The Bc A Good Shaking. Invert The Bc, Drain The Water And Debris Out By Depressing The Oral Inflator Button.
Wash The Inside Of Your Bc Often.
Inflate And Allow To Dry Before Storing.
Fill About Half Way With Fresh Water To Fully Rinse Inside.
Features
- Fits inflators with standard male QD nipple
- Fill about half way with fresh water to fully rinse inside
- Give the BC a good shaking. Invert the BC, drain the water and debris out by depressing the oral inflator button
- Inflate and allow to dry before storing
- Wash the inside of your BC often
- See more on Amazon...
Brand: XS Scuba | Manufacturer: XS Scuba
Dimensions: 0.60 x 6.30 x 5.00 Inches
See On Amazon #19
SeaDive Eagleye RayBlocker-HD Mask - Black Silicone
Asin: B00WAXEYBG | Model: SG_B00WAXEYBG_US | PartNumber: SG_B00WAXEYBG_US | Ean: 0053532009751 | UPC: 053532009751
Fog Resistant Coating.
Inside Coating Is A Blue Tint That Reduces Eye Strain For Very Comfortable Viewing.
Light Entering The Lens Is Refined By Sharper Image Technology, A Rayblocker Exclusive, For A Brighter, Sharper Image.
Reduces Harmful Uv Rays And Glare.
Rayblocker-Hd Coatings Allow Almost 100% Light Passage Which Provides Higher Definition (Hd) Vision Underwater.
The Single Lens Provides An Unobstructed Field Of View.
Features
- Easy-adjust buckles are attached directly to the mask skirt for a better, more comfortable seal
- The single lens provides an unobstructed field of view
- Fog resistant coating
- RayBlocker-HD coatings allow almost 100% light passage which provides higher definition (HD) vision underwater
- Light entering the lens is refined by Sharper Image Technology, a RayBlocker exclusive, for a brighter, sharper image
- Reduces harmful UV rays and glare
- Inside coating is a blue tint that reduces eye strain for very comfortable viewing
- See more on Amazon...
Brand: SeaDive | Manufacturer: XS Scuba
Dimensions: 6.00 x 10.00 x 12.00 Inches | Weight: 0.80 Pounds
Warranty: XS Scuba warrants to the original owner that all of its products are free of defects in materials and workmanship for a period of two years with proof of purchase.
See On Amazon #20
XS Scuba Gauge Reader Mask - Black Silicone
Asin: B00DDCPLN8 | Ean: 0798839990448, 0649823896058, 0687965626676 | UPC: 649823896058, 687965626676, 798839990448
Includes Mask Storage Box.
Features
- The unique glass to glass bond allows the +1.75 positive diopter lenses to slant back and downward, the ideal position for reading instrumentation, looking at camera settings or writing on slates
- Includes mask storage box
- See more on Amazon...
Brand: XS Scuba | Manufacturer: XS Scuba
Dimensions: 4.10 x 8.30 x 4.20 Inches | Weight: 0.90 Pounds
See On Amazon #21
XS Scuba Star Tool - Stainless Steel
Asin: B01HR8PULQ | Model: TL127 | PartNumber: TL127 | Ean: 0744947533787, 0687965625938 | UPC: 687965625938, 744947533787
Most Common Hex Wrenches 5/32”, 3/16” & 1/4”.
Compact Size: 3.85 X 0.5 In (98 X 13 Mm) Thick.
All Imperial Sizes For Us Products.
Stainless Steel Construction With Silicone Over Mold.
Valve Handwheel Driver.
1/2”, 9/16”, 5/8” & 11/16” Wrenches.
Features
- Remove and replace the most common scuba hoses
- 1/2 , 9/16 , 5/8 & 11/16 wrenches
- Most common hex wrenches 5/32 , 3/16 & 1/4
- Valve handwheel driver
- All imperial sizes for US products
- Stainless steel construction with silicone over mold
- Compact size: 3.85 x 0.5 in (98 x 13 mm) thick
- See more on Amazon...
Brand: XS Scuba | Manufacturer: XS Scuba
Dimensions: 0.50 x 3.00 x 2.10 inches | Weight: 1.00 Pounds
See On Amazon #22
XS Scuba Miflex Low Pressure Braided Hoses - Black, 84"
Asin: B001P4FS1G | Model: Others | PartNumber: Others | Ean: 8000092521003
Excellent Resistance To Abrasion.
Approved For Use For Use With Up To 40% Oxygen.
Kink-Resistant Design.
Multi-Layer Construction.
Features
- Lightweight and flexible low pressure hoses
- Multi-layer construction
- Excellent resistance to abrasion
- Kink-resistant design
- Approved for use for use with up to 40% oxygen
- See more on Amazon...
Brand: XS Scuba | Manufacturer: XS Scuba
Dimensions: 1.70 x 9.50 x 6.00 Inches | Weight: 0.22 Pounds
See On Amazon #23
XS Scuba 8 mm Thug Boots, Size - 9
Asin: B00BHPVPWE | Model: BT800-09 | PartNumber: BT800-09 | Ean: 0638170932458 | UPC: 638170932458
Heavy-Duty Molded Rubber Sole.
Glued And Double Blind Stitched Exterior And Interior.
Ykk’S Best Marine Bronze #10 Zipper Slider.
Hook-And-Loop Tab Zipper Retainer.
Protective Heel And Toecap.
High Abrasion Resistant Rynohyde Exterior Lamination.
Features
- 8 mm neoprene in all panels including sole
- High abrasion resistant RynoHyde exterior lamination
- Heavy-duty molded rubber sole
- Protective heel and toecap
- YKK s best marine bronze #10 zipper slider
- Hook-and-loop tab zipper retainer
- Glued and double blind stitched exterior and interior
- See more on Amazon...
Brand: XS Scuba | Manufacturer: XS Scuba
Dimensions: 0.60 x 10.60 x 10.40 Inches | Weight: 2.20 Pounds
See On Amazon #24
XS Scuba Highland Silicone Regulator Necklace - 10 inch
Asin: B0087VF90U | Model: SG_B0087VF90U_US | PartNumber: SG_B0087VF90U_US
Keep Your Second Stage Where You Need It.
Durable, “No Memory” Silicone.
Allows Regulator To Hang Close Under The Chin.
Features
- Attaches easily to any regulator second stage mouthpiece
- Allows regulator to hang close under the chin
- Keep your second stage where you need it
- Durable, no memory silicone
- See more on Amazon...
Brand: XS Scuba | Manufacturer: XS Scuba
Dimensions: 1.00 x 5.20 x 5.30 Inches | Weight: 0.02 Pounds
See On Amazon #25
XS Scuba Universal Valve Caps - Green
Asin: B004NG0D5E | Model: VC-GN | PartNumber: VC-GN
Nylon Cord Lanyard Included - Not Attached.
Available In Five Colors.
Protect The Valve Outlet.
Features
- Fits Deluxe K and PRO valves
- Protect the valve outlet
- Nylon cord lanyard included - not attached
- Available in five colors
- See more on Amazon...
Brand: XS Scuba | Manufacturer: XS Scuba
Weight: 0.01 Pounds
See On Amazon