YSTOOL - Buying Guide

Bestselling from YSTOOL on Amazon

1. YSTOOL AC U Charge Hose with Gauge Car Refrigerant R134a Recharge Tool Kit Auto Air Conditioner Char...
2. YSTOOL AC U Charge Hose with Gauge Car Refrigerant R134a Recharge Tool Kit Auto Air Conditioner Char...
3. YSTOOL 3 Way AC Manifold Diagnostic Gauge Refrigerant Charging Set for Air Conditioner HVAC R134a R4...
4. YSTOOL 3 Way AC Manifold Diagnostic Gauge Refrigerant Charging Set for Air Conditioner HVAC R134a R4...
5. YSTOOL Hand Held Vacuum and Pressure Pump Brake Clutch Fluid Bleeder Tool Kit Oil Change Power Steer...
6. YSTOOL Automotive AC R1234yf Adjustable Quick Coupler Adapter Kit HVAC High Low Connector Conversion...
7. YSTOOL Radiator Pressure Tester Pneumatic Vacuum Cooling System Purge Refill Kit 28PCS Universal Aut...
8. YSTOOL Cylinder Leak Down Tester Automotive Kit Gasoline Engine Compression Dual Gauge Leakdown Dete...
9. YSTOOL Hose Clamp Flexible Line Pliers Set Soft Pipe Tube Pinch Plier Tool 3PCS Red Kit for Brake Ho...
10. YSTOOL Automotive AC R134a Adjustable Quick Coupler Kit HVAC High Low Connector Conversion with 1/4 ...

Features

• This air conditioning U charge hose has 5 parts: 2PCS brass 1/4" Female parts, rubber nylon resin hose, -30inHg to 250PSI low pressure gauge, R134a low pressure side quick coupler and can tap. Total length is 43". This is a very simple and easy to use, AC suction service port dynamic pressure measurement and freon charge tool.
• Refrigerant charge hose uses rubber nylon resin material, anti-corrosion and durability. Burst pressure: 2500PSI, Max working pressure: 500PSI. Each side has a brass 1/4 Female parts. The low pressure meter equips with 2-3/4 big dial, scale range -30inHg to 250PSI, -76cmHg to 17.5kg/cm , marked with scale ranges for R134a refrigerant, Celsius unit
• The snap lock quick interface at the bottom implements the quick function of R134a quick coupler. The low pressure side R134a quick coupler has an anti-slip sculpture grip ring outside, and an accurate snap lock with ball bearings design inside, which is compatible with all mode of R134a suction service port by quickly connecting and disconnecting.
• The brass R134a can tap can be tightened and fastened on the 1/2 ACME Male thread of the R134a refrigerant bottle opening. The specially designed T style knob is very convenient for finger operation and the sharp pin inside helps to pierce self-piercing R134a can easily and quickly. Do not use the can tap as refrigerant can cap, the rubber seal ring inside will be corroded and leak if it contacts the refrigerant a long time
• The R134a quick coupler and can tap can be screwed on the hose 1/4 Female parts directly to charge R134a. When you use this air conditioner charge tool, please ensure the air conditioner compressor is working, the reading is right only when the AC compressor is working. We supply 1 year warranty, please feel free to purchase. Please contact us by Amazon message system if there is any question, we will reply in 24 hours.
• See more on Amazon...

Features

• This air conditioner U charging hose has 4 parts: R134a low pressure side quick coupler, rubber nylon resin hose, 0-100PSI low pressure gauge and R134a can tap. Total length is 19", suitable for easy to reach AC R134a suction service port. This is a very simple and easy to use, AC suction service port dynamic pressure measurement and freon charge tool.
• R134a charge hose uses rubber nylon resin material, anti-corrosion and durability. Burst pressure: 2500PSI, Max working pressure: 500PSI. The 0-100PSI 0-7kg/cm low pressure meter locates in the middle of the AC charge tool, equips with metal scale plate, color coded scale marked with LOW FULL ALERT DANGER, easy for monitoring the charging situation.
• One side is right angle metal R134a quick coupler, the snap lock quick interface at the bottom implements the quick function. It has an anti-slip sculpture grip ring outside, and an accurate snap lock with ball bearings design inside, which is compatible with all mode of R134a suction service port by quickly connecting and disconnecting.
• The other side is R134a can tap, can be tightened and fastened on the 1/2 ACME Male thread on the R134a refrigerant bottle opening. The specially designed T style knob is very convenient for finger operation and the sharp pin inside helps to pierce self-piercing R134a can easily and quickly.
• When you use this air conditioner charge tool, please ensure the air conditioner compressor is working, the reading is right only when the AC compressor is working. We supply 1 year warranty, please feel free to purchase. Please contact us by Amazon message system if there is any question, we will reply in 24 hours.
• See more on Amazon...

Features

• This set is a complete AC refrigerant charge kit to recharge R134a R404a refrigerant, includes 3 way AC manifold gauge, 3PCS 5FT long hose, 2PCS adjustable quick couplers, R134a can tap, ACME adapter and case. It is a perfect tool kit use for auto and household air conditioner, to evacuation/vacuum, diagnostic check, refrigerant charging and recovering
• The 3 way manifold gauge uses brass manifold body, brass parts, anti-corrosion and durability. Color coded scale for R134a R404a on 2-3/4 big dial, plus the sight window on manifold body, you can monitor easily on refrigerant charging and recovery. Blue gauge (low): -30inHg to 250PSI, red gauge (high): 0 to 500PSI, Celsius unit and a build-in screw in dials for calibration
• The 3PCS refrigerant charging hoses use rubber nylon resin material and are equipped with 1/4 female brass parts on each side, anti-corrosion and durability. Burst pressure: 3000PSI, Max working pressure: 600PSI. Red hose connects the service port under the red gauge to the red quick coupler, blue to blue, the yellow hose connects the charging port in the middle to the can tap or vacuum pump
• R134a adjustable quick couplers adopt superior brass and aluminium material, designed with quick connector and adjustable switch knob, easy to connect and disconnect all type of R134a service port. Blue coupler connects AC manifold gauge blue hose to automotive air conditioning suction service port, and red from red to AC discharge service port. Clockwise switch the red/blue knob to open AC service port, counterclockwise switch to close
• Included R134a can tap has 1/2 ACME Female thread interface, can screw to fix on 1/2 ACME Male thread of refrigerant bottle opening. Internal pin with sharp tip is designed for piercing R134a bottle easily and quickly. There is a 1/4 Male to 1/2 Female brass ACME adapter with shut off valve in the kit for you to choose. And we also supply 1 year warranty, please feel free to purchase
• See more on Amazon...

Features

• This is a complete AC freon charge kit to recharge R134a R404a refrigerant, includes 3 way AC manifold gauge, 3PCS 5FT long hose, 2PCS R134a quick couplers, R134a can tap, adapter and valve core tool kit. It is a perfect tool kit which is used for auto and household air conditioner, to evacuation/vacuum, diagnostic check, freon charging and recovery.
• The 3 way HVAC manifold gauge uses brass manifold body, brass parts, anti-corrosion and durability. Color coded scale for R134a R404a on 2-3/4 big dial, plus the sight window on manifold body, you can monitor easily on refrigerant charging and recovery. Blue gauge (low): -30inHg to 250PSI, Red gauge (high): 0 to 500PSI, Celsius unit and a build-in screw in dials for calibration.
• The 3PCS refrigerant charging hoses use rubber nylon resin material and are equipped with 1/4 Female brass parts, anti-corrosion and durability. Burst pressure: 3000PSI, Max working pressure: 600PSI. Red hose connects the service port under the red gauge to the red quick coupler, blue to blue, the yellow hose connects the charging port in the middle to the can tap or vacuum pump.
• R134a quick couplers adopt superior brass and aluminium material, designed with quick connector interface, push to lock, very easy to connect and disconnect all type of R134a service port. Blue coupler is for automotive R134a air conditioning suction service port, and red for R134a AC discharge service port.
• Included R134a piercing type can tap has 1/2 Female thread interface, can screw to fix on 1/2 Male thread of refrigerant bottle opening. Internal pin with sharp tip is designed for piercing R134A bottle easily and quickly. There are brass adapter with shut off valve (Male to Female: 1/4 to 1/2) and hose & valve core repair tool kit in the box for you to choose. And we also supply 1 year warranty, please feel free to purchase.
• See more on Amazon...

Features

• YSTOOL multi-functional vacuum pressure pump kit can be widely used to test a variety of essential vehicle settings and operations, such as Computerized Engine Control Devices, Ignition Control Devices, Air Condition & Heating Controls, Cruise Control Systems, Brake Systems etc, especially work for changing brake clutch fluid and power steering fluid. Use the hand pump to form negative pressure in the brake system, sucks out waste oil and air, and guide the new oil to fill all the system.
• The included 3 differently sized black L type and 9 straight cone rubber adapters, can connect with the brake bleeder valve on any vehicles that use standard brake bleed valves, or any other vacuum system which can work with these adapters properly. Use the closest sized one to ensure a tight fit. And bleed from master cylinder to wheel cylinder and caliper. There is a universal cup adapter packed in the case, can use as a vacuum sealer to match with your reusable vacuum food storage bags.
• The hand pump adopts aluminium cylinder with a -20 to 0inHg vacuum & 0 to 40psi pressure gauge. Move the collar on the cylinder forward and pump for vacuum, move rearward and pump for inflating pressure, pump and then move the collar for releasing pressure. The 2 20L, 2 4L and 1 3L transport hoses are transparent, help to observe if the waste oil is all pumped out, and when you see the clear new brake oil is sucked out in the hose without any air bubble, then done.
• In the hand held vacuum pump tester set, there are two 120ml / 4.5oz storage jar, which have liquid storage cover and liquid transfer cover with O-rings for sealing. Please note, there is a connected direction request for the liquid transfer cover, connect the side marked TO PUMP to hand pump by short hose, if not, the waste oil may be sucked into the pump and destroy it. Do not invert the jar while using too.
• If after pumping several times and you can not pump any more, but the index keeps on certain readings without dropping, maybe it is because of a blocked brake bleeder valve. You need to clean the brake bleeder valve first, and then do not forget to suck out the air if you do not change the waste oil this time.
• See more on Amazon...

Features

• The internal pin is connected with the upper knob to realize the adjustable function. When in use, CCW switch the knob to close the R1234yf coupler, fasten it to the AC service port, then CW switch the knob to lift the internal pin to insert and pull out the Schrader valve core slowly. Compared with the push to insert directly, this design can reduce the wear of the AC service port valve core by the internal pin, and ensure no refrigerant leakage when connected and disconnected
• Snap lock quick interface at the bottom implements the quick function. Outside of the adjustable quick connection interface, there is an anti-slip knurled grip ring, and inside of the interface, there is an accurate snap lock with ball bearings design, which compatible with all mode of R1234yf service ports by quickly connecting and disconnecting.
• The blue low pressure R1234yf quick connector, connects AC manifold gauge blue hose 1/4 Female parts to auto AC suction service port. And the red high pressure R1234yf quick coupler adapter, connects AC manifold gauge red hose 1/4 Female parts to auto AC discharge service port. Very easy to use.
• These air conditioning adjustable quick couplers use high quality brass and aluminium material, very hard, wear resistance and anti-corrosion, very suitable as corrosive refrigerant accessories. Also there are rubber seal rings inside, ensure the gas tightness and no leak. The design of the overall quick interface sleeve and U groove, you are required to totally CCW switch & close the knob, then the coupler can be removed from the test port. Avoid the occurrence of misoperation
• Please note, clockwise switch the red/blue knob to open AC service port, counterclockwise switch to close. We have marked it on the labels of the knobs. And we supply 1 year warranty, please feel free to purchase. Please contact us by Amazon message system if there is any question, we will reply in 24 hours.
• See more on Amazon...

Features

• Coolant pressure tester kit includes 3 tools set, radiator leakage detector, coolant refill tool and thermometer. 17PCS specific adapters and 1 universal cone rubber adapter, to connect almost all types of radiator openings on the domestic and imported vehicles, help to check the leak of water tank and fill the coolant under vacuum environment. There are also 3PCS radiator cap adapters and 2PCS connectors for testing the leakage of the radiator caps.
• Manual vacuum pump pressure checker uses high quality aluminium cylinder, much harder than regular plastic one. 21 long rubber hose, brass parts, anti-corrosion and durability. 3 large dials with color coded small scale range 0-35PSI, very easy to observe. Use the hand pump tester to pressurize the radiator/cap and observe whether the pointer drops over time to confirm a system leak.
• Cooling system coolant filling manifold tool adopts superior brass manifold body with plastic cover, and 18 long rubber hose, brass parts for anti-corrosion and durability. The pneumatic vacuum refiller firstly uses the workshop air to pump the cooling system and form a vacuum, and then pumps the coolant into the system. Add coolant under vacuum environment, there is no large cavitation, avoid engine warping and other damage.
• A water tank pressure leak tester and vacuum purge fill tool kit is very helpful on troubleshooting, save money and time. If there is a small leak in cooling system, or if you add coolant without vacuum, can cause many problems or even a damaged engine, this kit is much cheaper than the maintenance cost or a new engine. And normally, the tools take about 10 minutes to test leak and 5-10 minutes to refill coolant. Simple operation and save time.
• Thermometer uses stainless steel material, with scale range 0 - 200 (32 - 400 ). Blue plastic case keeps the color coded 21PCS adapters on place, and you can conveniently choose the right one according to the marked picture on instruction. Equipped 2 air plugs, American and European styles, it is widely applicable to your existing air hose. And we also supply 1 year warranty, please feel free to purchase.
• See more on Amazon...

Features

• The multi-piece leak down tester kit adds 6 new partners to give you more options and a better repair experience. On the basis of a regular set(Set includes 1PC double gauge maniflod, 1PC rubber hose and 2PCS metal adapters), this 3-in-1 cylinder gauge diagnostic tool kit adds 2PCS universal push-on connectors, 2PCS threaded adapters, 1PC M14 extension rod, and 1PC long reaching extension hose. It is a must have for any DIYer or professional mechanic's tool collection.
• Convenient dual gauge design allows the leak down tester gauge assembly to directly show you the pressure value and leak rate of the tested cylinders. Ranging from 0-100 psi / 0-7 bar and 0-100%(Accuracy: 0.5%), easy to read 3 gauges spend less time to give accurate results. Compression leak tester hooks up to air compressor(provide yourself) can help to detect common engine faults such as worn piston rings, worn valves, cracks in cylinder walls and blown head gaskets.
• Leak down tester gauge also equipped with 18 rubber hose, AR2000 pressure regulating valve, American type air plug and aluminum manifold body. Valve knob made of alloy and plastic, used for pressure adjustment of the inputed air from the air compressor. Pull out for use, and push back to lock. This compression tester & cylinder leakage gauge test tool kit fits for any gasoline engines with spark plugs(within 20mm).
• Constructed with aluminum and rubber, straight / angled type universal push-on connectors don't need to be threaded into spark plug wells and applicable to almost all petrol engines, and M14 aluminum extension rod can be installed on long / short hose(41-3/4; 11-1/2) end to increase distance and facilitate operation. Adapter sizes: M14*1.25, M18*1.5, M10*1, M12*1.25. High quality and deep threads allow the fittings to bite better, antislip and durable.
• Long & short rubber hoses feature 300 psi W.P and metal adapters at both ends(M14 x 1.25; quick plug)- Ideal for connecting the gauge assembly to the cylinder with the metal fittings. Your satisfaction and recognition are always what we pursue. The product can be returned unconditionally in one month and we also supply 1 year warranty. Welcome to contact us if you have any doubts or you are not satisfied with the product quality in the process of use.
• See more on Amazon...

Features

• Hose pinching pliers set includes three clamp plier tools to fit for many types of flexible tubes. While replacing the brake calipers or flushing the heating core, pinch off the hoses will neither cause fluid leaks nor damage the soft tube. Ideal for use on water soft pipe, gas soft pipe, fuel line, coolant soft pipe, brake hose, heater hose, lawnmower hose, radiator hose and more. Due to material limitation, hose clamp pliers are not suitable for hard, consolidated or high pressure pipe lines.
• All three pipeline pinch off clamps are of the same shape except for their effective usage length: 3/4(small clamp total length: 6-1/8), 1-1/2(medium one: 7-1/4), and 3-1/8(large one: 10). Heat-resistant and non-conductive nylon plastic construction, safe and durable. It is a good assistant to clamp the flexible pipe tightly at where you need to and effectively avoid fluid and air leak. You don't have to fully drain out the liquid for much trouble, shorten the maintenance time.
• There is a small gap(same length of 1/8'') between the jaws of fluid hose pinching pliers, designed to make room for thicker hose operation and avoid the clamping action is V in shaped. Otherwise you will find one side is clamped well but the other side drips. If the hose is too thin to be clamped firmly, pad waste plastic sheets between the jaw and hose may help solve the problem. No leak or drips. Attention: Please fix slider with the handle and keep the two ends of it at the same line.
• Equipped with a built-in locking mechanism, these line clamp pliers allow the pliers to be caught with a safety buckle according to the size of the clamp, 0~2-3/8(small and medium tool) and 0~3(large tool) move distance of the slider. Rounded jaw edges help grip the hoses but avoid damage to internal hose. Shape design is also comfortable and easy to operate. Handsfree and simple. So much better than using locking pliers that always easily break the pipe and make a mess.
• See more on Amazon...

Features

• The internal pin is connected with the upper knob to realize the adjustable function. While using, CCW switch the knob to close the R134a coupler, fasten it to the AC service port, then CW switch the knob to lift the internal pin to insert and push back the Schrader valve core slowly. Compared with the push to insert directly, this design can reduce the wear of the AC service port valve core by the internal pin, and ensure no refrigerant leakage when connect and disconnect
• Snap lock quick interface at the bottom implements the quick function. Outside of the adjustable quick connection interface, there is an anti-slip knurled grip ring, and inside of the interface, there is an accurate snap lock with ball bearings design, which compatible with all mode of R134a service ports by quickly connecting and disconnecting.
• The blue low pressure R134a quick connector, connects AC manifold gauge blue hose 1/4 Female parts to auto AC suction service port. And the red high pressure R134a quick coupler adapter, connects AC manifold gauge red hose 1/4 Female parts to auto AC discharge service port. Very easy to use.
• These air conditioning adjustable quick couplers use high quality brass and aluminium material, very hard, wear resistance and anti-corrosion, very suitable as corrosive refrigerant accessories. Also there are rubber seal rings inside, ensure the gas tightness and no leak.
• Please note, clockwise switch the red/blue knob to open AC service port, counterclockwise switch to close. We have marked it on the labels of the knobs. And we supply 1 year warranty, please feel free to purchase. Please contact us by Amazon message system if there is any question, we will reply in 24 hours.
• See more on Amazon...

Features

• The engine oil pressure tester kit is used to diagnose and test the engine oil pressure value, to check whether it is normal. Prevent engine failure due to lack of oil. And with this best in class tools, you can get a definite pressure value well without relying on the dashboard light.
• There are 10 types of thread adapters are suitable for most cars, motorcycles, boats and other vehicles with gasoline and small diesel engines. As long as the adapters can match with your engine and oil pressure does not exceed 140 PSI. The 10 adapters are marked with number, you can choose the right one very easy.
• The pressure gauge uses metal gauge head with shockproof rubber cover, 3 big dial with clear dual scale range 0 to 140 PSI and 0 to 10 Bar. Compare to a large range, this oil pressure gauge is easy to read about 1-2 Bar with a short range. There are a straight quick coupler and a elbow one in the case, you can choose it according to the location of the engine oil pressure test port.
• Steel adapters, brass quick couplers, are featured with high hardness, rustless, durable and good air sealing. The 4FT long hose is made of rubber nylon resin with MAX. working pressure 300 PSI. There are also a small bag of seal gaskets, which are used for replacing the ones on adapters.
• For 30 days after purchase, return your undamaged products and you will receive a full refund. For 1 year after purchase, we will deal with all quality-related issues by part of REPLACEMENT OR REFUND. Please feel free to purchase. Please contact us by Amazon message system if there is any question, we will reply in 24 hours
• See more on Amazon...

Features

• Transmission oil is mainly used to clean, lubricate, lose heat, seal and for hydraulic transmission. It ensures that the gearbox can work normally at low temperature and prolong the life of transmission device. Regular maintenance is necessary in accordance with the frequency recommended by the manufacturer, avoid reducing your engine s long-term health. This manual transmission oil change tool helps to transfer and renew right amount of automatic transmission fluid after discharging waste fluid
• The ATF engine oil refill tool set provides 15PCS ATF adapters to fit a variety of vehicle models, add oil from fill plug or help to push transmission fluid into the engine through the drain plug on the transmission pan. All the 15PCS metal adapters are marked with NO. and well packed in a case, compatible with Ford, BMW, Nissan, Honda, Audi, VW DSG, VW CVT, Skoda, Porsche, Benz, Mini Cooper, Kia, Toyota, Hyundai, Infiniti, VOLVO and Lexus. You can find appropriate models by applicable manual
• Gear box oil change pot works with 14-3/4 detachable hand crank, featuring hydraulic pressure design and high pressure resistance, easily press and quickly pump clean oil into the gearbox. No more dependence on the air pump or risk of deformation. 7.5L big capacity well constructed container, is marked with accurate scale to help observe the amount of liquid. 1.2M transparent hose has a quick coupler to connect ATF adapter easily, with a ball valve to control the fluid flow, very convenient
• Start engine to normal operating temperature then shut off. Lift the vehicle by car jack and drain the waste oil from the drain plug on the transmission pan. Add enough new transmission oil into the pot, choose a suitable ATF adapter to connect the quick coupler on the hose, then connect with the fill plug or the drain plug. Pump until the transmission is filled to the desired level (Each stroke provides about 70ml). Follow the vehicle operating instruction to check the transmission fluid level
• Gearbox oil filling change tool set includes 1PC transmission oil change pot, 1PC hand crank with small accessories, 15PCS metal ATF adapters with application instruction and 1PC plastic case, 1PC dual head screw driver, 1PC wrench.
• See more on Amazon...

Features

• If there is air in brake system, brake fluid will get damp and spoiled. The wheel brake cylinder will be difficult to return and it may cause brake failure. So brake fluid needs to be timely checked and replaced to ensure its good braking performance. Manual brake fluid bleeder tool pumps the new brake oil into the brake master cylinder while driving air and old fluid out of the system without producing any air. Quick and efficient. Well-maintained brake system brings driving safety
• Hand pressure pump bleeder tools come with 2PCS master cylinder threaded adapter caps with inner diameter 45MM, are compatible with most Alfa Romeo, Audi, Bentley, BMW, Fiat, Land Rover, Lamborghini, Mercedes, Mini Cooper, Porsche, Renault, Volvo, Volkswagen, Bugatti, Chevy, Chrysler, Ford, Toyota. This brake clutch bleeding tool also fits for ABS system. If you have other related equipments or tools, just use them to fill other fluids. Please refer to the auto repair manual and car condition
• Most cars need 2L brake fluid at best for oil replacement, our tank reservoir can hold 3L to complete the work once for all. No need to notice the remaining amount of oil pot. Only 10-15psi is required during the fluid transfer (MAX W.P.: 2 bar / 30 PSI). Refer to car instruction for preparation, add right amount of brake fluid into refill reservoir and connect it to master cylinder, assemble waste oil bottle set and connect it to the wheel cylinder, then pump. Repeat on all wheel cylinders.
• Brake fluid change tool set includes a 3L refueling pot with hand pump & air release valve & pressure gauge & 40-1/4 long hose, a 9-3/4 bleeder tube with black cone nipple, a 1L waste oil bottle, a chain, a handle tool, and two master cylinder adapter caps (straight and elbow type, I.D. 45mm. Make sure your master cylinder cap is a I.D. 45mm threaded cover before purchasing). Tools are mainly made from rigid metal, rubber and plastic material, wearproof and anticorrosive for longer lifespan
• See more on Amazon...

Features

• This brake clutch oil change tool is good at exchanging brake and clutch fluid. Use 90-120PSI shop air to form negative pressure in the brake system, sucks out waste oil and air, and guide the new oil to fill all the system.
• The oil filler bottle has a long screw with a valve, works with a right adapter to stuck on the brake fluid reservoir, no manual support required. The new oil will flow into reservoir as soon as open the valve, and when the lever of the oil in the reservoir reach the screw, the flow will be stop, so you do not need to keep an eye on the oil level, very convenient.
• After fixing the oil fill bottle and opening the valve, connect the shop air to the waste oil bottle, and connect the black cone nipple to the vehicle bleed valve. Open the compressor, hook the waste oil bottle to the engine cover and use the trigger locker to hookup the trigger. After 4-5 mins, close the compressor and check the pressure of the pedal.
• The brake system bleeder kit includes 1 1L waste oil bottle with 1.8M transparent hose, 1 0.8L new oil filler bottle, 4 plastic master cylinder adapters, 2 air quick plugs (American and European style) and 1 black cone nipple. The master cylinder adapters with size 21 - 30mm, 24 - 32mm, 28 - 37mm, 32 - 41mm, are suitable for most vehicles, such as sedan, motorcycle, truck, SUV, etc.
• This pneumatic vacuum bleed tool kit is very simple convenient and easy to operate by one man. Also we supply 1 year warranty, please feel free to purchase. Please contact us by Amazon message system if there is any question, we will reply in 24 hours
• See more on Amazon...

Features

• This is a AC freon charge kit to recharge R1234yf refrigerant, includes 3 way AC manifold gauge, 3PCS 5FT long hose, 2PCS R1234yf adjustable quick couplers, valve core tool kit and black case. It is a perfect tool kit which is used for auto air conditioner, to evacuation/vacuum, diagnostic check, freon charging and recovery.
• The 3 way R1234yf manifold gauge uses aluminium manifold body, brass parts, anti-corrosion and durability. Color coded scale for R1234yf on 3 big dial, plus the sight window on manifold body, you can monitor easily on refrigerant charging and recovery. Blue gauge (low): -30inHg to 348PSI, Red gauge (high): 0 to 500PSI, Celsius unit & Fahrenheit unit. There are build-in screws in dials for calibration.
• The 3PCS refrigerant charging hoses use rubber nylon resin material and are equipped with 12mm Male brass parts on one side and 1/4 Female ones on the other side, anti-corrosion and durability. Burst pressure: 3000PSI, Max working pressure: 600PSI. Red hose connects the service port under the red gauge to the red quick coupler, blue to blue, the yellow hose connects the charging port in the middle to the can tap or vacuum pump.
• R1234yf quick couplers adopt superior brass and aluminium material, designed with quick connector interface, easy to connect and disconnect all type of R1234yf service port. Only when close the couplers by fully counterclockwise switch the knob, then you can clamp and lift the grip ring to connect and disconnect, insure operating safety. Blue coupler connects AC manifold gauge blue hose to automotive air conditioning suction service port, and red from red to AC discharge service port.
• There are also a double-headed valve repair wrench and a bag of hose & valve core accessories kit in the case for you. Also we supply 1 year warranty, please feel free to purchase. Please contact us by Amazon message system if there is any question, we will reply in 24 hours
• See more on Amazon...

Features

• This multi-functional vacuum pump kit can be widely used to test a variety of essential vehicle settings and operations, such as Computerized Engine Control Devices, Ignition Control Devices, Air Condition & Heating Controls, Cruise Control Systems, Brake Systems etc., especially work for changing brake clutch fluid and power steering fluid. Use the hand pump to form negative pressure in the brake system, sucks out waste oil and air, and guide the new oil to fill all the system. Very simple.
• The included three differently sized black L type rubber connectors and two straight cone rubber connectors, can connect with the brake bleeder valve on any vehicles or motorcycles that use standard brake bleed valves. Use the closest sized one to ensure a tight fit. And bleed from master cylinder to wheel cylinder and caliper. There is a universal cup adapter packed in the case, can use as a vacuum sealer to match with your reusable vacuum food storage bags.
• The hand pump adopts brass cylinder with a -30 to 0inHg gauge, has pressure-maintaining function and a pressure relief valve on the cylinder. The tool also uses rubber trigger cover to protect hand. The 2PCS 20L and 2PCS 4L transport hoses are transparent, help to observe if the waste oil is all pumped out. When you see the clear new brake oil is sucked out in the hose without any air bubble, then done.
• In the hand held vacuum pump tester set, there is a 120ml / 4.5oz storage jar, which has liquid storage cover and liquid transfer cover with 2PCS O-rings for sealing. Please note, there is a connection direction request for the liquid transfer cover, connect the side marked TO PUMP to hand pump by short 4L hose, if not, the waste oil may be sucked into the pump and destroy it. Do not invert the jar while using too.
• If after pumping several times and you can not pump any more, but the index keeps on certain readings without dropping, maybe it is because of a blocked brake bleeder valve. You need to clean the brake bleeder valve first, and then do not forget to suck out the air if you do not change the waste oil this time. Also we supply 1 year warranty, please feel free to purchase. Please contact us by Amazon message system if there is any question, we will reply in 24 hours.
• See more on Amazon...

Features

• YSTOOL radiator pressure tester coolant vacuum refill kit is a versatile tool. The radiator pressure tester quickly finds abnormal leaks in less than 10 minutes. Pneumatic coolant vacuum refill tool evacuates trapped air in minutes and refills with bubble-free coolant in 5-10 minutes. Stainless steel thermometer checks for high coolant temperatures. Significantly improves vehicle operating efficiency and service life.
• The universal radiator tester pressure leak test kit has 17 colour coded radiator test adaptor covers for specific models for easy identification. There is also a cylinder adapter with 3 adapter sleeves and a universal cone adapter. There are also 4 radiator cap adapters and 2 connectors for radiator cap leak testing. Suitable for GM, BMW, Volkswagen, Audi, Porsche, Chevrolet, Dodge, JEEP, Chrysler, and many other models of cars, trucks, and airlifts.
• Radiator hand pump pressure testers are made of quality aluminium cylinders and precision shock gauges. Vacuum-type coolant fillers are made of dependable brass and plastic materials. 21-inch and 18-inch rubber hoses come with wear-resistant brass parts. American and European style air plugs are available for a variety of air hoses. Clear coolant fill and bleed hoses are included. Thermometer made of stainless steel.
• When testing for leaks, attach the correct adapter cap to the hand pump, pressurise the cooling system and watch the gauge needle drop. The faster the needle drops, the worse the leak. To replenish coolant, evacuate the cooling system with a vacuum pump, then fill the radiator directly with coolant.
• See more on Amazon...

Features

• YSTOOL fluid extractor and dispenser tool kit includes 3PCS 1M dipstick tubes, can insert into engine dipstick tube to extract and refill engine oil or transmission fluid directly, no more need to crawl about under lifted vehicles and avoid mess. Also can insert into any insertable pipe or tank to change non-corrosive and low-consistency liquids (such as differential fluid, transfer case fluid, gear oil, power steering fluid, coolant, water) in vehicle, jet ski, lawn mower or other small engine
• This ATF engine oil refill tool set provides 15PCS ATF adapters to fit a variety of vehicle models, add oil from fill plug or help to push transmission fluid into the engine through the drain plug on the transmission pan. All the 15PCS metal adapters are marked with NO. and well packed in a case, compatible with Ford, BMW, Nissan, Honda, Audi, VW DSG, VW CVT, Skoda, Porsche, Benz, Mini Cooper, Kia, Toyota, Hyundai, Infiniti, VOLVO and Lexus. You can find appropriate models by applicable manual
• YSTOOL pneumatic oil change tool set allows two-way operation of oil suction and refueling, quick and sparkless. Absorb, transport and distribute liquids under safe and clean conditions. The consistent conversion of the 2-way control valves (blue screw valve and air inlet ball valve) on the pump assembly to achieve the conversion between extracting and dispensing, very easy. Pneumatic tool, works with vacuum pump to extract and with air pump to refill, ensuring high efficient and labor-saving
• Pump assembly incorporates the container cover, the handle trigger with lock, 2-way control valves for conversing evacuate and dispense, safety valve for automatically releasing excessed pressure (above 43psi /3bar), 1/4 American style air inlet plug, pressure gauge (0-80psi/0-6bar) for monitoring the pressure change, quick coupler for connecting main hose. 10L big capacity well constructed container, is marked with accurate scale to help observe the amount of liquid. Stable base avoids dumping
• The main hose is 80 long, with a quick plug on one side to connect the container, and a quick coupler on the other side to connect the dipstick tubes or ATF adapters. There is a ball valve on the quick coupler to control the fluid flow, very convenient. Please note, there is no instruction in the kit, please refer to your vehicle operation instruction and following product description to operate. Your satisfaction and recognition are always what we pursue, please contact us to resolve any issue
• See more on Amazon...

Features

• This multi-functional vacuum pump kit can be widely used to test a variety of essential vehicle settings and operations, such as Computerized Engine Control Devices, Ignition Control Devices, Air Condition & Heating Controls, Cruise Control Systems, Brake Systems etc., especially work for changing brake clutch fluid and power steering fluid. Use the hand pump to form negative pressure in the brake system, sucks out waste oil and air, and guide the new oil to fill all the system.
• The included three differently sized black L type rubber connectors and two straight cone rubber connectors, can connect with the brake bleeder valve on any vehicles or motorcycles that use standard brake bleed valves. Use the closest sized one to ensure a tight fit. And bleed from master cylinder to wheel cylinder and caliper. There is a universal cup adapter packed in the case, can use as a vacuum sealer to match with your reusable vacuum food storage bags.
• The hand pump adopts brass cylinder with a -30 to 0inHg gauge, has pressure-maintaining function and a pressure relief valve on the cylinder. The tool also uses rubber trigger cover to protect hand. The 2PCS 20L and 2PCS 4L transport hoses are transparent, help to observe if the waste oil is all pumped out. When you see the clear new brake oil is sucked out in the hose without any air bubble, then done.
• In the hand held vacuum pump tester set, there is a 120ml / 4.5oz storage jar, which has liquid storage cover and liquid transfer cover with 2PCS O-rings for sealing. Please note, there is a connection direction request for the liquid transfer cover, connect the side marked TO PUMP to hand pump by short 4L hose, if not, the waste oil may be sucked into the pump and destroy it. Do not invert the jar while using too.
• If after pumping several times and you can not pump any more, but the index keeps on certain readings without dropping, maybe it is because of a blocked brake bleeder valve. You need to clean the brake bleeder valve first, and then do not forget to suck out the air if you do not change the waste oil this time. Also we supply 1 year warranty, please feel free to purchase. Please contact us by Amazon message system if there is any question, we will reply in 24 hours.
• See more on Amazon...

Features

• This brake clutch oil change tool is good at exchanging brake clutch fluid, power steering oil, engine oil and any other fluid. Use 90-100PSI shop air to form negative pressure in the brake system, sucks out waste oil and air, and guide the new oil to fill all the system.
• Pour the new brake oil into the master cylinder, connect the black cone nipple to the brake bleeder valve, connect the compressor to the 1/4 air quick plug. Open the air compressor, wait a few mins until clean fluid comes out without bubbles, close the air compressor and turn to the next brake, until changing the brake oil for all the wheels, check the pressure of the pedal.
• One man operated brake fluid replacement tool, easy and simple. You do not need to press the pedal back and forth, or need other's help, and you will not stain the floor too. Please note, you need to seal the drain screw on the bottom of the collection bottle by Teflon tape, and during the bleeding one by one, you need keep filling new fluid into reservoir to avoid it from empty and air leaks in.
• YSTOOL brake oil extractor kit has a 340ml waste oil collection bottle, a lid assembly with ball valve, 1/4 NPT European style air quick plug and a 80 long hose. There are a elbow black rubber cone suction nipple and a dark green plastic cone nipple for you to choose. This pneumatic bleeder tool is widely suitable for most vehicles, such as sedan, motorcycle, truck, SUV, etc.
• Convenient pneumatic brake bleeding tool, save you from sitting there to manually pump by hand pump or press the pedal back and forth by traditional bleeding method. Also we supply 1 year warranty, please feel free to purchase. Please contact us by Amazon message system if there is any question, we will reply in 24 hours
• See more on Amazon...

Features

• This caliper press tool is suitable for twin and quad piston fixed calipers, as well as single and twin piston floating calipers and with 2PCS big expansion plates for bigger calipers. And the distance between the two expansion plates is 1-1/2" to 2-1/2" (2" to 3" when adding the 2PCS big expansion plates), please check your brake caliper size first before purchasing.
• There is a 360 degree swing ratchet in the middle of the two expansion plates, can be inserted into the caliper at any direction. The ratchet works only when there is a certain pressure on the expansion plates. You can extend the pressure of the expansion plates to a suitable width by hand, and then put it into the calipers.
• The brake caliper piston ratchet wrench uses 1/8 thickness high quality steel expansion plates, very hard. The two expansion plates keep parallel to ensure that the caliper piston is subjected to uniform force, preventing damage to the caliper or piston dislocation.
• Swing the long handle to operate the ratchet, and toggle the reversing switch to switch between expansion and contraction. This brake caliper piston expander is a very helpful tool for doing brake pad replacement, resetting the piston, changing the brake and doing other brake works
• For 30 days after purchase, return your undamaged products and you will receive a full refund. For 1 year after purchase, we will deal with all quality-related issues by part of REPLACEMENT OR REFUND. Please feel free to purchase. Please contact us by Amazon message system if there is any question, we will reply in 24 hours
• See more on Amazon...

Features

• The capacity for professional brake bleeding machine is upto 2.7Gallans / 10L (5L new oil capacity). It is divided into two layers, upper oil storage tank and lower gas storage tank, with an intermediate rubber diaphragm separating the gas and brake fluid. 10-40psi compressed air can be pre-charged for portable using, with consumption 4.5CFM at 30psi. Do not exceed 40psi, or damage the equipment and connection hose (Do not over 1bar for ABS system to avoid damage on the brake master pump)
• The 1/4 European style air plug on the machine can be connected to the quick connection from air compressor. The shop air was stored in the gas storage tank and pressurize on the upper oil storage tank, to force the new fluid into the brake system and while waste oil or air out into the used oil collection bottle. Precharged air can help to finish multiple brake flush and refill work at a time. During the fluid transfer, tread quickly on the brake pedal and release slowly. Do it a few times.
• 8PCS specific adapters, 2 universal cone adapters and 1 universal square adapter, can connect almost all types of master cylinders, help to refill the brake and clutch oil. If the specific adapter leaks, it means it is not suitable for your vehicle, please use the universal adapters for a tight connecting. All the adapters have quick plugs, can connect to the quick coupler on the brake bleeding tool easily and quickly. And they are placed in a black case for easy storage and transportation.
• Pneumatic pressure brake fluid bleeder tool kit is made of aluminum alloy, brass, rubber and plastic. Resist corrision and built to last. The set is widely suitable for professional workshop and your own garage, to change brake clutch fluid and flush the air from the brake system (It also can be used for ABS system too). Do not attempt to use the tool on any other liquid, contamination of brake fluid and possible brake system failure may result. Please read the instruction carefully before use
• The brake system pressure bleeder kit includes a 1L waste oil collection bottle, with 13L chain can be hooked on the brake. Work with the 13L bleeder hose with universal cone suction nozzle, collect the waste oil from wheel cylinder and caliper.
• See more on Amazon...

Features

• Three-in-one cooling system tool kit has 3 excellent functions: coolant pressure tester, coolant refilling & temperature measurement. Manual pump cooling system pressure tester can diagnose whether the radiator is leaking and help quickly bleed the waste coolant if needed. Pneumatic vacuum fill coolant tool vacuumizes to eliminate trapped air in minutes and refills cooling system with no air bubbles produced. Thermometer checks if the coolant temperature is too high. Fit for home & business
• 28PCS universal radiator tester pressure leak test set includes 17 color-coded radiator test adapter caps and a universal rubber cone adapter for almost all radiator openings on most vehicles at home and abroad. Another 3 radiator cap adapters and 2 connectors for radiator cap leak detection. All are well positioned in the case, complete in specifications and easy to assemble. Widely compatible with GM, BMW, VW, GMC, Porsche, Chevy, Dodge, JEEP, Chrysler and many other model car, truck & airlift
• Radiator manual pump pressure detector adopts premium aluminum cylinder and accurate shock-proof gauge design (3'' color-coded dial, 0-35PSI/ 0-2.5bar). Vacuum type coolant refiller takes reliable brass and plastic material. 21 & 18'' rubber hose with brass parts, anti-corrosive and wearproof. American & European style air plugs are provided for various air hoses. Transparent coolant fill hose & bleeder hose are included. Thermometer is made of stainless steel (scale range: 0 - 200 /32 - 400 )
• Connect correct adapter cap with the radiator coolant pressure test manual air pump to pressurize the cooling system, observe the built-in pressure gauge for the pointer change. The faster it falls, the more serious the leak. The test only takes about ten minutes and coolant vacuum injection for 5-10 minutes. Radiator trouble is usually due to breakage, leakage and non-vacuum coolant fill, later repair and engine change will pay much more. Attention: Please donot take this tool set for other use
• Precaution and timly test & fill coolant correctly need our specific cooling system tool set to help you. Designed to help find abnormal leakage of water tank and add coolant in vacuum without bubbles produced, greatly improve the vehicle operating efficiency and service life.
• See more on Amazon...

Features

• The fuel injector tester kit is designed to identify and diagnose malfunctions in fuel supply & injection systems and help find possible causes. Suitable for most fuel injection systems in gasoline vehicles such as cars, trucks and ATVs. Incompatible with Bosch, CIS-Jetronic, or GM throttle body systems because of no suitable connection adapters. Also not fit diesel high pressure injection pump or high pressure fuel track on direct-injection engine due to the test range: 0-140psi /0-10 bar
• Gas fuel pressure tester gauge kit equips with various fittings and hoses for test, and supports two assembly forms. One is to connect pressure gauge directly to fuel pump's standard Schrader / M6 / M8 / M10 / M12 / M14 fuel pressure test port with 15 / 8 hose and M8 / M10 / M12 / M14 adapters. The other is to measure by fitting the T-type joint between the fuel pump and engine. Please note: no small Schrader connector in this fuel presure test kit to perform service for some Ford models.
• Accurate fuel pressure gauge has a 3-1/2 big color-coded dial with shockproof rubber cover. 15L hose can attach to the 1/4 SAE standard Schrader valve on fuel pump or fuel rail directly. The built-in translucent fuel discharge hose and pressure release valve work for safe pressure release & easy fuel recovery. The connectors are made of brass and aluminium, good airtightness & anti-corrosion. Reinforced rubber resin nylon hoses (WP:300PSI) are resistant to torsion & high temperature
• After testing the fuel pressure by YSTOOL gasoline engine fuel injection pressure tester, compare the reading with the recommended pressure range. If higher, it could be a faulty fuel pressure regulator or a bent clogged return line. If lower, possible causes are dirty fuel filter, weak pump function, incorrect fuel tank exhaust, restricted fuel line, clogged pump inlet filter or electrical control failure. Petrol is highly flammable, please ask professionals to operate with no open fire nearby
• See more on Amazon...

Features

• YSTOOL front end service tool set adopts robust 45# steel construction, with high-strength and deformation resistance features, can stand high intensity extrusion. The stout forcing bolts surface adopts black oxidation treatment to prevent rust, grease the bolts up before using for smooth operation and protect the bolt thread, grease them up after using for better preservation.
• This ball joint puller kit includes 1x ball joint separator, 1x tie rod end and ball joint remover, 1x conical pitman arm puller, 1x pitman arm and tie rod end puller, 1x pitman arm puller, and all the 5 tools are organized in a red blow molding case for easy storage and transportation. The 5PCS remove tools use C-shape, jaw shape and teardrop shape design, very simple, but can seat on the ball joint position tightly and provide very effective grip to fix the pullers.
• According to your ball joint choose the compatible puller, insert the puller into the ball joint opening, aim the bolt at the ball joint, turn the bolt by using the right size ratchet wrench, squeeze the ball joint out. These ball joint pullers can easily remove the stubborn ball joint, pitman arm, idler arm, tie rod end, steering linkages and steering boxes on front suspension and steering system, and will not damage boot/sleeve and other parts.
• Ball joints require regular maintenance and replacement on average 75,000 to 150,000 miles or it may cause inconvenience and even safety hazards such as steering failure, instable driving and ball joint fracture. YSTOOL front end service tool kit is a necessary tool set for replacing ball joints, widely uses for most imported and domestic minicar, compact car, mid-size car and light pickup truck. May not fit for most full-size car, mid-size and heavy-duty pickup, mid-size and heavy-duty truck.
• See more on Amazon...

Features

• The engine oil pressure tester kit is used to diagnose and test the engine oil pressure value whether it is normal. Prevent engine failure due to lack of oil. And with this best in class tools, you can get a definite pressure value well without relying on the dashboard light.
• There are three types of thread adapters are suitable for most cars, motorcycles, boats and other vehicles with gasoline and small diesel engines. As long as the adapters which thread sizes are 1/8, 1/4, 3/8 can match with your engine and oil pressure does not exceed 100 PSI.
• The pressure gauge uses metal gauge head with shockproof rubber cover, 3 big dial with clear dual scale range 0-100 PSI and 0-7 Bar. Compared to a large range, this oil pressure gauge is easy to read about 1-2 Bar with a short range. Return to zero automatically can get more accurate readings and is no need to calibrate.
• Adapters in sizes of 1/8, 1/4, 3/8 are made of brass, featured with high hardness, rustless, durable and good air sealing. The 1/8 adapter is fixed on the hose, which can directly connect with applicable engine. The hose is made of rubber nylon resin and the length is 30 with working pressure is 300 PSI.
• For 30 days after purchase, return your undamaged products and you will receive a full refund. For 1 year after purchase, we will deal with all quality-related issues by part of REPLACEMENT OR REFUND. Please feel free to purchase. Please contact us by Amazon message system if there is any question, we will reply in 24 hours
• See more on Amazon...

Features

• Fuel system smoke leakdown tester machine performs rapid and efficient smoke leakage-locating service. Smoke locator leakage test tool is dedicated to automotive sealing systems such as fuel system, intake system, gas lines, exhaust system, cylinder's internal mechanical components, EVAP, engine air tightness and cooling system (Not for air conditioning system), on all makes and models of vehicles such as cars, motorcycles, snowmobiles, off-road vehicles, ATVs, light trucks, speedboats, etc.
• Add a proper amount of tester oil into the smoke leakage diagnostic unit, connect it to the vehicle's 12V battery, connect the universal adapter to the detector unit and the sealing system, check all connections for well sealing and then start the machine. Waiting about 2 mins, tester oil vibrated into a smoky shape in the unit, and blowed into sealed pipe system by the build-in air pump. If there is a leakage in the system, you can exactly see smoke coming out of where the leak is located.
• YSTOOL universal leak down test unit is overall a solid cuboid with compact structure and small footprint, equips air pump inside and uses 12V battery as power supply, avoids site restrictions when in use. Built-in 2-1/2 high precision pressure gauge is convenient to check real time system pressure (Pressure unadjustable). With overload protection mechanism, this small type leak detector machine will automatically power-off when the machine runs continuously more than 20 minutes
• A total of 13PCS matching tools come with the EVAP system smoke machine set, includes sealing system leak detection machine, smoke output tube, specific detachable power cable, universal adaptor, tester oil, valve core wrench, taper stopples(3 pieces), crankcase adapter connector, capped cone adapter, adapter substitute, and hook. Simple to understand and use with equipped easy-to-read instructions and diagram. Special shock-proof packaging protects the smoke leak detector during transportation
• The smoke leak detector machine kit includes a small bottle of tester oil, and it can be replaced by mineral oil or baby oil for subsequent use. Your satisfaction and recognition are always what we pursue. The product can be returned unconditionally in one month and we also supply 1 year warranty, just be confident to purchase. Please feel free to contact us if you are not satisfied with anything during the use, and we'll response to you within 24 hours.
• See more on Amazon...

Features

• YSTOOL master quick disconnect tool set, compatible with GM Ford Dodge Mazda and Chrysler, will help to separate quick disconnect couplings on A/C lines, fuel lines and transmission oil cooler lines. These couplers on A/C fuel system are safety mechanism, ensure not be disconnected easily while still charged and under great pressure, avoid the possibility of an explosion and frostbite damage. And quick disconnect tools are necesssry to separate the couplings faster, easier and safer
• This quick disconnect kit includes 7 types tools: 7PCS white plastic A/C fuel line disconnect tools, 6PCS color coded and size marked aluminium a/c fuel line disconnect tools, 4PCS color coded and size marked plastic A/C spring lock coupling disconnect tools, 1PC silver metal fuel line disconnect scissor tool, 1PC ford fuel line coupling disconnect tool, 1PC ford oil cooler line disconnect tool, 1PC ford/gm quick coupler disconnect tool, 2PCS rubber inserts and 3PCS rubber bands
• 22PCS quick disconnect tools are made of lightweight anodized aluminium or premium metal or superior plastic for long term use, and can work for several sizes lines: 1/4, 5/16, 3/8, 1/2, 5/8, 3/4, 7/8. Choose the proper size one of the 4PCS A/C spring lock coupling disconnect tools, to engage the spring boss on the proper side of the fitting, a simple inward thrust of your coupling tool hand pops open the spring retainer and then a momentary tug by your free hand separates the connection
• Tool operation is also very simple for other disconnect tools. Clamp the tool over the A/C fuel lines proper side, while holding the line, firmly push the tool forward so its barrel is able to depress the line's internal quick disconnect coupling, the spring (locking mechanism) has been released by listening for the slight click, then pull back the line to remove it. Remember to relieve the pressure in the system you are working on before disconnecting it
• See more on Amazon...

Features

• Timing chain synchronizes the rotation of the crankshaft and camshaft and allows the engine valves to open and close during each cylinder's ignition. If the timing system fails, your engine may rattle and misfire. YSTOOL engine camshaft alignment timing tools help to keep the camshaft alignment, convenient for you to replace your worn or elongated belts / chains or do follow-up timing system repair and maintenance work, to ensure appropriate timing and keep your engine in a ideal state
• Camshaft timing alignment holding tool applies to a wide range of vehicles with 3.5L 3.7L 4V engines, compatible with such as Ford, Edge, Mustang, Explorer, MKX, MKT, MKZ, Flex, Fusion Hybrid, Milan, Sable, Taurus,Taurus X and fits F-150. Please refer to the description for the specific adaptation. It comes with two 303-1248 cam shaft holding tools and a 303-1530 chain tension tool. With specific tools to help the timing system repair work, camshafts can be held from moving during service
• When maintaining the timing system, gently slide the engine camshaft holder tool into place to hold the camshaft in the TDC position, keep the camshaft aligned. Some extra tools may need according to the specific situation to support the camshaft, for example remove and install the cam bolts. Insert the chain tension tool through the hole from the top of the mega gap and use it to keep the tensioner in the compression position. Actual operation depends on the car manual and vehicle condition
• Heavy duty cam holding tool and tensioner hold down tool, made of premium structural steel with integral forging technology and coated with black oxide finish, good crack resistance and antirust performance. Healthier and safer. Tool capability and quality has been proven by a great deal of rigorous engine tests, please rest assured to choose. Please note, timing system maintenance should be operated by professionals
• See more on Amazon...

Features

• Terminal release kit provides all the tools necessary for the damage-free releasing work of plug type connectors. Includes 23pcs release tools of various shapes and sizes to help remove terminals from electrical connectors and eliminates damage to wires or terminal blocks. Makes it safer and more efficient.
• This kit fits for a wide range of models from home and abroad. Suitable for most American, European and Japanese cars and trucks which has electrical terminal and cables. Widely fits Ford, BMW, Mercedes, Opel, Porsche, Audi, Jaguar, etc. Ideal addition to your garage.
• Tools come packed in a heavy-duty plastic blow-molded carrying case for easy transportation, simple storage, and quick organization; Each handle of pin extractors is identified with numbers for quick reference to the well-illustrated application chart.
• Constructed of alloy steel, these extractors are designed for maximum strength and longevity. Has rustproof surface and some adjustable pins. Rubber handle applies ergonomics, providing comfortable & non-slip grip, and insulating performance.
• See more on Amazon...