pop-tech - Buying Guide

Bestselling from pop-tech on Amazon

1. pop-tech 9 Pack Sticky Adhesive Replacement for Socket Mount Base, VHB 3M Sticker Pads for Phone Col...
2. pop-tech Car Grips Mount for Phone Stand, 2 Pack Phone Holder for Collapsible Grip/Socket Mount User...
3. pop-tech Car Vent Phone Mount for Socket Grip, Air Vent Clip Phone Holder Compatible with Magsafe Wa...
4. pop-tech Sticky Adhesive Pad Replacement for Car Dashboard Magnetic Phone Mount Base, 8pcs 3M VHB Do...
5. Sticky Adhesive Replacement for Suction Cup Mount, 4 Pack Circle 70mm (2.76") Heat Resistance 3M VHB...
6. pop-tech Air Vent Phone Holder for Socket Mount, 360 Rotation Vent Clip Car Mount Silicone with Adj...
7. pop-tech Magnetic Car Phone Mount Holder: Magnet Dash Cell Phone Holder - Universal Dashboard Car St...
8. pop-tech Car Mount Adhesive Dashboard Pad: 95mm Dash Suction Cup Mounting Disk for Phone Holder - 3M...
9. pop-tech Sticky Adhesive Replacement for Magnetic Car Mount, 8PCS Circular Heat Resistant 3M VHB Dou...
10. Metal Plate for Phone Magnet, 8 Pack Replacement Magnet Disc Magic Mount Plate with Adhesive Backing...

Features

• 9 Pack Sticky Adhesive Disc for Socket Base - Sticker adhesives extra strong as backup is designed to reapply the socket mount. Multi pack of big adhesive replacement backing sticky is a life saver to re-attach or reuse switchable tops socket to cell phone cases for extending the life of your socket mount or wall mount or ring holder or dash car mount bracket as extendable and multipurpose applications. Super thin both side replacement tape kits accessories for switching out socket users!
• High Bond Round 3M Adhesive Pads - Anti gravity double face vhb sticky replacement tapes adhere and match for the bottom of collapsible grip is with high temperature resistance and stronghold stickiness. Sticker adhesive patches refills for reapplying the back of your socket. Foam adhesive disks reinstall and transfer your flex sockets secure in place and fix on the android phone. Super strong 3hb circle replacements stickers sheeting withstand the heat for moveable socket adhesive dots pieces.
• Cleaning Prep Pads Provided - The thin two sided circular sticky-pad replacement kit sheet comes with wet wipes to clean the surfaces before applying. If you holds up the alternative clear replacement adhesive dot circles both sides over time you may need ultra cleaning prep pads for cleaning solution. Make sure the mounting surface and tops socket mount bases is cleaned completely before applying a new 2 sided adhesive strips dots.
• Easy to Install - With 2 way sticky thingy, re-stick your spin socket or readjust to hold on a security camera even counter lights. Replace the rounds tearable tacky and removable blank gel adhesive backs & clean the back of phone and socket with wet wipe before restock the new 3 m replacable double stick adhesive tab parts, peel off the replaceable 3m tape adhesion pad to stick the base of socket mount for reattachment. Wait 24h to use vintage sticky auxiliary 3m adhesive patch tapes.
• What You Get - Heavy duty pop-tech heat resistant extra sticky loop 9 piece tiny 1.38 inch 2-sided replacement stickers discs remover for repositionable the bottom sticky of interchangeable socket wallet+ and 4 pack cleaning prep pads bulk. The multi-pack double-stick adhesive discs mat for locking and attaching to refresh or re-use the collapsible grip stands saved you much more available as back up and make it reusable and long-lasting if need change out or re-install the swivel socket.
• See more on Amazon...

Features

• Sturdy Car Grip Mount: More practical car phone mount cutout with exquisite tolerances appearance. You could use this flexible grip car mount with room to accommodate with the socket mount for hand on the back of phone. Such Small that's unnoticeable when not in use with small spaces and can be adjustable for any angles what you want to keep the mobile phone visible. Perfect replacement fits with luxe and thin expanding stands grip mount / spinnable collapsible swappable tops users for women.
• Multifunctional Mount Hole: Accommodates car phone holders with sticky back to wherever car mount holding on sitting area, fitting for windshield, for window, for desk, treadmill, truck, minivan, vehicle, office, kitchen sink, waterproof shower, bedside table, wall, glasses, fridge, rearview mirror or multisurface work area as multi-tool functional mount. Accessible to use GPS for travel in the vehicles as alternative multifunction phone dashboard mount. Slim and stickable rubber mount stretches the fit.
• Easy To Install: Clean a flat multi-surfaces, peel-off the automatic sticker adhesive of mount base then stick on, wait 24h for better attaches to the multi spot in. Rubbery and gravity carphone grip mount brackets using flat and thin expanded socket top / wallet plus we handles is soft silicone and sticky adhesive patches double sided tapes to hold onto the regular smart phones or tighten thin phone case. Not suggest to use with thicker, mini, glitter and marble tropical socket.
• Universal Compatibility: Single adaptive auto parts car stand with gel pads stick on the dashboard is strong to work with the cell phone on rough road for car truckers. Adjust the smartphone on horizontal & vertical angle. Handsfree dashmount is compatible with iphone 14 pro max iphone 14 pro iphone 14 plus iphone 14 iphone 13 pro max iphone 13 pro iphone 13 iphone 13 mini iphone 12 pro max iphone 12 pro iphone 12 mini iphone 12 iphone xs max iphone xs iphone xr iphone 11 pro max ipad mini 6.
• What You Get Combo: pop-tech amazing heavy duty 2 pack stylish expandable grip mounts companion with gap space and self tapes stands up & circle 2 pack extra parts two sided 3m sticky adhesive tape. The clasp to grabs hold the socket into the slots. 2 pack heat resistant large 3m sticky adhesive double sided tapes accessory. strongly suggest to use with your expanding stand that need to be collapsed or engaged for easy sliding and had better mount it on flush surface.
• See more on Amazon...

Features

• Extendable Metal Clip : The upgraded four-point positioning vent clip is 0.33 inch longer than others, which can better clamp firmly for mountable car mount into extra wide vent, wont spin and dropping even if heavy phone on bumpy roads. This vent mount doesn't block vent blades, works with both horizontal, vertical or side way vent in any automobile. And 360 rotation ball joint make driver can adjust suitable angles according to the airvent.
• Chubby Socket Friendly: This flexible universal car phone mount with room solves the problem that old model can only fix thin pull out grip, not for extra big one. Exclusively designed for most flat (< 0.3 in) and thick ( 0.3 in) on the back of phone case, such as phone grip with swappable top, phone wallet ( credit card holder) with expanding grip, collapsible grip for magsafe, slide stretch grip, etc. Good with socket users !
• Flush Deep U Shaped : Unique cutout design perfectly accommodate the expanded socket grip piece, keep smart phone upright without flipping, more stable when driving. This mountable hands free phone mount make cellphone easily switch between portrait or landscape mode when GPS navigation or enjoy music, give you a safer and best convenient driving experience.
• New Premium Material: The fixed car vent mounted phone cradles with space is made of soft PU, won't easy to wear and tear, won't easily break like the plastic one in the market, can be used for a long time. More importantly, it won't scratch the beautiful surface of luxury socket grip sold by amazon. Dust proof, waterproof and easy to sweep.
• What You Will Get: Package includeds a clamp mount with extender hook, 2 * 35mm sticky adhesive. We provide six-months warranty, if need any help with this strong air vent holder car accessories, please feel free to contact pop-tech.
• See more on Amazon...

Features

• Compatible with Various Kinds of Dashboard Magnetic Mounts Rectangle: 1.85" x 0.87" ,thickness: 0.047" in. Pop-tech's extra adhesive tapes are made with 3M HVB original adhesive. When the base of your dashboard magnetic mount loses its stickiness, replacing the adhesive on the base of the holder is the way. And our super sticky adhesive tape is your choice! These magnetic dashboard mount base replacement sticky adhesive compatible with Wizgear, Scosche, Bextrix, APPS2Car, Trainium, etc.
• Adhesive size Perfectly suitable for 95% of dashboard mounting bases. It can be pieced together or cut to replace the base sticker tape of driving recorder, dash cam, ring grip mount, automotive windshield sticky mount, smartphone holder, audio DAC! Versatility: Stickers can be affix on flat hard surfaces, such as home bathroom mirrors, refrigerators, bedposts, walls, lockers, offices, dashboards, windscreen.
• Very High Bond Stickiness & Heat Resistance Pop-tech's rectangular adhesive tape uses the most advanced silicone adhesive synthesis technology, and its steady viscosity is 40% higher than ordinary adhesive tapes. High temperature resistance: Pop-tech's glue adhesive can resist high temperatures up to 120 ! It can maintain the viscosity under high temperature environment. Ease of use: tear off without trace!
• Note (1) Please do not stick the 3M adhesive pad on the very soft, rough, textured, oily surface or leather surface. (2) Please ensure that the required surface is wiped and dry. (3) The 3M VHB rubber pad is for one-time use. (4) It is recommended to wait at least 24 hours to ensure that the sticker has the adhesion before use. (5) Do not touch the adhesive with your hands
• Warranty Pop-tech products provide 12 months worry-free after-sales warranty service (extended from 12 months to lifetime if you contact customer service with any problem ). The package contains : 8 pcs Universal square adhesives and 8 pack Universal wipe pads.
• See more on Amazon...

Features

• Widely Applicable Self Sticky gel mounting disc 70mm fits any suction cup style accessories, assortment, suitable for various dashboard surfaces / windshields / window, to solve the problem of suckers falling off. Applicable dash suction cup phone mount, windshield cell phone holder, gps navigation bracket, car tablet stand, outdoor camera car mount, and car decorations, wireless charger base, electronics, monitor, toy, radar detector mount, backup camera, action camera, alarm sensors, monitor.
• Genuine 3M Sticky Adhesive Dots These phone dashboard car mount plate back stickers have high temperature(120 +) resistance performance, use it without worry in hot summer. Extra strong both side round 3M VHB dashboard cell phone grip replacement adhesion pads's stickiness is 40% stronger than ordinary 2 side sticky glue, Let your hands free! Easy to fix your Navigator bracket, car phone base, shower head, heavy duty dashboard mount base. Stable and secure driving truck, vehicle in bumpy roads.
• Any Size Adapted to Various Suction Base You can cut or trim these steelie universal adhesive pads into smaller funny pieces if need. The size is not too small or too big, compatible with most suction cup cars dashboard mount/accessory & other windshield long arm mount, silicone grips, GPS holder, EZ Pass/I-Pass/SunPass holder, ETC, video camera mount, cameras wall mount, home security wifi camera, wireless charger base, dash cam mount holder, statue, idol, panel decorative, etc on the market.
• Super Sticky & Easy to Remove These high-strength, very high bond double-sided vinyl stickers let you quickly and easily create a long-lasting bond, bonding almost instantly with no drying time. It also resists heat and moisture, and protects adhesive surfaces against scratches, easy replac, peel off without leaving any sticky residue behind. Easily replaceable suction cup replacement customized adhesive circle for dash cute/button/decor/custom/controls/cam recording, dashboards phone socket.
• Package Includes & 100% Satisfactory Service 4 x 2.76 inch ( 70 mm diameter ) double face heat resistance round mounting disk adhesives utensil, 4 x wet wipes. We provide 12-month warranty, replacement and lifetime technical support for after-sale service. Please do not hesitate to contact us if you have any questions or not applicable to our suction cup adhesive tape and our customer service team is stand by 24 hours of the day to solve your problem. All we want is your satisfaction.
• See more on Amazon...

Features

• U Shaped & Switch Lock Design - Universal socket car vent mount has a swivel feature for better adjustment according to the changeable vent widths. The strong prongs of this socket vent mount clips tightly to the car ac vent blades on air conditioner via twist lock the screw nut. Pliable silicone air vent iphone holder slides into the vent slot and can be unbreakable. The clamp stays on and holds up your smartphone snuggly. Best nonslip car vent mount hole for Socket while hands-free driving.
• Adjustable 360 Rotation - Car vent clip phone holder accomodates for socket that support you to rotate the android at unobstructed viewing from portrait to landscape, which takes it easier for GPS navigation and not block the dash, center console for safer driving as a hands-free ac vent mount. Thick & flat socket grip attaches to the phone / case and are tired of putting the phone in a large suction cup holder, flat surface dash car phone holder. Perfect silicone phone holder for auto ac vent.
• Durable & Sturdy - Flexible silicone air vent car mount cutout work with collapsible grip & stand is made of soft rubber and well made extremely to protect the surface. Compared to the multi car vent mount bulk, cute socket grips easier slides into the moveable silicone airvent phone holder using for socket spot. The locking mechanism to hold onto the vent. Universal socket vent mount is accessible to hold the mobile phone securely in the vehicle. Great addition fits well to air conditioning.
• Easy To Use - Put screw to the rotating swivel knob and connect to the pivoting socket car vent mount, insert into the circular air vent outlet. This screws into the vent and your socket slips down into it. Portable socket mount on the cell phone slides into the vent clip mount and allows smartphone to be vertical or horizontal. Make sure swappable socket grip is collapsed or compressed instead of expanded for easier sliding into the silicone air vent car mount bundle and quick removal.
• What You Get Rich Combo - pop-tech single amazing locking air vent car mount plain black compatabe socket mount users & heat resistant 2 pack removable extra strong sticky adhesive replacement component use with luxe socket mount / decorative collapsible grip & stand / expanding stand / monitor wallet plus / credit card holder. We strongly suggest to use for no more than 0.3mm thickness of expanding stand.
• See more on Amazon...

Features

• Super Strong Magnets: pop-tech magnetic car mount adopts upgraded powerful N52 magnets, built-in four high-strength magnets, just put your phone on the holder, it will auto lock into place like magic, entirely hands free. Whether you place phone portrait or landscape, the phone will not fall off even when passing speed bump, bumpiest roads, sharp turn or hard brake. The ball bearing is also very stiff, so you don't have to worry about the mount creaking or even moving, letting you drive worry-free!
• Heat Resistant Adhesive: Our car phone mount magnetic with 3M vhb sticky adhesive, strictly tested, the adhesive is 40% stronger than ordinary stickers, it creates a solid connection between holder and dashboard, won't come off even in harsh winters and hot summers (up to 248 F). And can be easily peeled off without leaving any residue on the surface of your luxury car.
• Small & Compact: The magnetic phone mount base is only 1 inch, doesn't take up much space, suitable for mounting in various locations in the car, such as rounded corners and slopes on the dashboard, windshield, console, radio system and more. Its sleek and cute design blends seamlessly into the car's interior, showing elegance. It neither occupies visual space nor blocks view, bringing you a pleasant driving experience while enhancing the aesthetics of the car interior.
• Unique Craftsmanship: This universal phone holder has an innovative ball joint swivel for 360 flexible rotation. It is made of sturdy metal zinc alloy, not easy to rust; the touch surface uses soft silicone, not scratching your device; and the two sides are designed like small wings, easy to grip. Strong magnets keep the phone stable and the ball rotation gives you the perfect view, protecting your driving safety.
• What You Get: 1X Car Phone Holder, 4X Metal Plates(2x 30mm, 1x 40mm, 1x 48mm), 2X Adhesive Replacements, 2X Protect Film, 1X User Manual. The exquisite box is perfect as a gift for your family, friends or lover on Christmas, New Year, birthday, Valentine's Day, Anniversary and other special days. If you have any problems during the use of our car mount, please feel free to contact us, we will respond within 24 hours.
• See more on Amazon...

Features

• Universal Compatibility Dashboard sticky pad is designed for suction cup gel, to solve the problem of suckers falling off. Pop-Tech sticky mounting disk fits any style of suction cup device within 95mm in diameter. Such as dash suction cup mount, window cell phone cradle, GPS dash cam cupholder, tablet stand, magnetic car mount, wireless charger base, radar detector, car decoration toys, etc.
• High Bond & Heat Resistant Adhesive Suction cup mount plates are suitable for slight curved and textured surface of vehicle. Circle grey sticker is superior 3M VHB enhanced version, whose glutinosity is 40% stronger than transparent clear ones. Adhesive mounting disk can be firmly adhered to the automobile dash. Heat resistant stickers can securely lock auto phone holder at a high temperature of up to 120 , to ensure dashboard adhesive discs perform perfectly outside temps in hot summer.
• Easy to Use and Remove Several installation steps is easy to fix. Clean surface, affix disk, add weight, and wait 24 hrs. Upper part PVC plastic plate kit provides glass-like surface for pedestals of suction cups while bottom sticky foam adhesive for sticking on the dashboard textured surface! Please press down for a while for tightness.
• Note Each pad is One-Time use only, not reusable. Once attached, it may not be movable. Use a new disk if you want to transfer its location. For better adhesive holding, Wait for 24 hrs for 3M sticky adhesive dashboard pad mounting disk to cure to the surface before applying suction cup. Don't touch the adhesive with hands for better efffect. Please peel off the red backing cover paper slowly, or the paper will adhere with glue if you peel too fast, because the 3M glue is superb powerful.
• Package Content & Satisfactory Service 2 x 95mm ( 3.74 ) Round Dashboard Mounting Mat Disk, 1 x User Manual. Pop-Tech select high quality material and we provides 12-month Satisfactory After-Sale Service and lifeproof technical support for buyers. Please do not hesitate to contact us if you have any questions and our customer service team is stand by 24 hours of the day to solve your problems. All we want is your satisfaction.
• See more on Amazon...

Features

• Used for magnetic phone car mount: Exclusively designed for various magnetic cell phones car mount bases with a diameter about 1 inch (23 mm), the car adhesive compatible with magnet socket & cell phone finger ring holder, including dashcam. This adhesive is extremely strong, and allow you to transfer an old tops sockets from one case to another. Take note of the size: they are small round ones not large circles. Red multi-use 8 PACK Smaller adhesive part for hands free car smartphone mount.
• Very High Bond 3M Automotive Adhesives Replacement: Selection of high-quality Genuine 3M VHB adhesive pad, 3m circle adhesive double sided, provides strong and durable support, high temperature, low temperature resistant, stronger than ordinary 3M sticky self-adhesive pads. Much better than find a new one, maybe you are looking to replace the tapes that came with your car mount which lasted a whopping months then started to fall. The performance of these discs is exactly what you are expecting.
• EASY TO USE: Just peel off the paper from both sides and stick the thin adhesive double sided pad to the item, and convenient to remove it without any residual glue, save your time and energy. To make the adhesive reuse more stickiness for best result, please first clean the mounting surface with cleaning pad provided. Use a card to pry the old damage, after removed the old one, place the new adhesive. Make the tags clear cleaned completely before attaching to affix blanks backers for carmount.
• Extra cleaning pads: to maximize 3m vhb adhesive pads contact perfectly, please let it dry after cleaning the surface with wet wipe, stuck and wait at least 24 hours to never let any air in after installation. These geniune 3M adhesive are cut to the correct sizes for the holder clip. For the ultra adhesive dots, if the cradle-less adhesion tabs hard to be tearable, try to press it back and peel again. You can fixate the adhesive and position the idols in the dash with lightly leather textured
• 100% Satisfactory Service: Standard size heavy duty refills adhesive patches backup. We provide 18-month warranty and lifetime technical support for best after-sale service. Please do not hesitate to contact us if you have any questions about our car mount adhesive and our customer service team is stand by 24 hours of the day to solve your problems. All we want is your satisfaction. With friendly customer service, if you're unsatisfied for any reason, we'll immediately refund your purchase price
• See more on Amazon...

Features

• Work with various magnetic mounts Phone metal plate for magnetic mount is NOT magnetized, and they need to use with magnetic car holders. Adhesive metal plates are attachable to automobile magnetic phone mounts. 8 pack genius circular magnet plate for phone can go with multiple devices. Phone mount plate disc laminated cellphone allows you to place on smartphone horizontal or vertical under the magnetism between magnets and iron disk piece.
• For Socket Grip Stands Socket grips is NOT included! Small metal plate of circle two size for both mobile phone magnet vehicle mounts and socket grips. Silver thin metal phone plates are pretty accurate size for collapsible sockt, to hidden inside openable socket top whose cap can take apart/assemble easily. Bigger black mount metal plate can attach perfectly on the regular flat swappable expanding socket's pattern surface.
• 3M Adhesive Backing Metal disc with premium strong stickiness double-sided 3M adhesive backer, so self adhesive suit all magnetic mobile phone magicmount. Please place 3M metal plate sheet on the phone away from wireless charger sensor. Or apply mount metal plate to phone case, and remove case while charging. Magnet mettallic disc won't fall of on rugged and bumpy road once glued.
• Smooth Edge & Protactive Films Provided Thanks to unique polishing process, polished edge of phone magnet plate is smooth and anti-scratch. You won't get you fingers scratched like other brands. Come with additional clear films. Stick films then attach the metal plate, so it is non-scratch for your phone to remove the spare metallic disk or sticky residue left.
• No Risk Purchase 6 x 1.18 inch silver magic plate, 2 x 1.57 inch black magicplate, 2 x protective clear films. We provide 12-month warranty and 30 days money-back guarantee. Any dissatisfaction with your purchase, just contact us and we will give you satisfied solution immediately.
• See more on Amazon...

Features

• Upgraded Metal Hook Design - The automatic silicone vent holder with ultra stable vent clip can make the retractable hook fully extended so it reach far enough back of the vent and holds the smartphone sturdy in place. With thick nonslip silicone pad, it accommodates the double locking protection and never fall off and holds up your smartphone suggly for horizontal & vertical truck air vents. Great accessory for expanding stand and prefect contraption for rentals and traveling while use gps.
• U Shaped for Socket Grips - Adjustable and weighted silicone car phone mount holder cutout with room is designed for regular luxe swappable socket base, thin flat socket grips-expanding stand for back of phone to hang it to slide in place instead of thicker, glitter, mini socket. Using non-slip silicone and plastic combination feature, cell phone holder vent u shape can be unbreakable like the plastic one and easy slide the socket into the mount slot. The locking mechanism clips onto the vent.
• One-Hand Operation - Easy to use and can be removable. No suction sticker pads and dash adhesions. Just put the both nuts in the swivel ball joint knob and tightly lock or loosely unlock by pivoting and rotating near the steering wheel. Adjust how tight you want to be depending on your vent louver in the car truck by rotate and spin it for hands-free navigation and recording. It stays clipped onto the vent backing and the prongs open and closed where it attaches to the air vent.
• Universal Compatibility - Ac vent phone holder for socket hold the cellphone sturdy on the vent. Compatible with iPhone 14 pro iPhone 14 pro max iPhone 14 plus iPhone 13 promax iPhone 13 mini iphone 12 promax iphone 11 promax iphone xs max Galaxy Note 20 Ultra s 21 Note 10+ Samsung Galaxy S21 Ultra Samsung S20+ Galaxy s21 plus 20 ultra galaxy s10e samsung s20 fe 5g samsung galaxy a12 samsung galaxy 9 samsung s9 plus flip 3 Galaxy a71 5g Samsung A21 Galaxy z fold 3 Pixel 6 pro Motorola 15g.
• What You Get Rich Combo -pop-tech flex silicone phone car vent holders station black- with retractable metal hook bundle accommodating for mountable flat and thin socket users / collapsible grip & stand / changeable expandable stand / wallet plus / card holder mount 1 set, included 2 pack extra circle small 3m sticky adhesive disc replacement kit tape component stick on. Please kindly note that the vent mount is fit for horizontal and vertical vents.
• See more on Amazon...

Features

• IMPORTANT TIP: Our tesla phone mount is ONLY for Tesla Model Y, NOT for Model 3, be sure to confirm your vehicle model before purchase; The base clip is made of soft silicone and fixed to the dashboard air vent by physical structure, when moving holder position, it may leave slight indentation on dash, but the indent will disappear automatically over time, so you don't worry about damaging your dashboard, please confirm if you mind the result before placing order.
• Multi-position Mounting: Our phone holder for Tesla Model Y(EXCEPT for Model 3) has a base snap that precisely matches the dashboard air vent gap. Large snap can be stuck on the right and center of the steering wheel, small snap can be mounted on the left side, you can choose the appropriate location based on your needs to ensure a good view. Also this dash phone mount for tesla y can be installed on the passenger side, letting your family enjoy hands-free phone convenience together.
• Compatible for MagSafe: pop-tech model y mag-safe mount features 16 enhanced N52 permanent magnets and a double-ring loop design, won't interfere with signal, keeping navigation and calls open. Powerful magnetic holds phone securely on bumpy roads or sharp turns, giving you peace of mind while driving. The edge of magnetic phone mount for tesla model y is made of frosted metal, enhancing durability and stability. Hollow design of holder perfectly fit socket grips and enhances phone cooling.
• 360 Adjustable & Noise Reduction: The ball joint of cell phone mount for tesla model y is made of hard ABS, very sturdy. It enables the holder to rotate or tilt freely, letting you view GPS vertically or horizontally, without disturbing the phone plugged in for charging. Plus the base for tesla y vent dashboard mount is designed with non-slip, anti-vibration soft silicone around the corners, effectively protecting dash from abrasion and ensuring no shaking or noise at high speeds.
• Universal Compatibility: This model y phone mount can directly fix iPhone 15 14 13 12 Pro Max/Pro/Plus/Mini, but considering that some smartphones and cases don't have mag safe function, we provide extra 2 magnetic rings as gifts, you just need to stick it to the back of your phone/case, then it can be attached to the mount quickly and accurately. If you have any problems for tesla model y phone holder, please feel free to contact us and we'll assist you.
• See more on Amazon...

Features

• Universal Suction Cup Mounting Disk - pop-tech car mount adhesive pad is designed for suction cup base, handle the fall off of suckers effectively. Disc dashboard pad has wide compatibility -- any suction cup cell phone mount and accessories within 75mm in diameter: most automotive suction cup phone stand, windshield long arm mount, gps mount, tablet computer bracket, dash camera holder, radar detector, car decorations, etc.
• Heat Resistant Disk - Select high-bond sticky adhesive ( affixed to the bottom of the plastic disc ), whose stickiness is 40% stronger than ordinary ones. Heat resistant adhesive on the back of the dashboard sticky disc support 120 high temperature, higher than other adhesive for auto phone holder. Dashboard adhesive disc performs perfectly at outside temps. Attention: Frequent exposure to outdoor sunlight for a long time will accelerate the aging of the adhesive, please replace it in time.
• Strong Sticky Adhesive- Seperate 2 super sticky adhesives are flexible options for your suction cup phone mount devices and other occassions. You can stick the new 3M VHB double side tape directly on the suction cup. Strong viscosity can hold securely for heavy duty mount. Also applicable for glass, ceramic these smooth material. Thanks to premium strong adhesion adhesive, dash sticky discs provide a smooth and flat surface for pedestals of suction cup, to hold strong those heavy duty mount.
• Easy to Use - Dash suction cup mount plate is suitable for flat / slight textured surface of vehicle, not fit distinctly arced or bumpy surface. Installation is simple: clean, dry, affix disk, add weight, and wait. After you fix sticky disc, it's important to wait for 24 hours before applying suction item. Adhesive is not reusable or movable, so please install a new mounting disk when you want to transfer its location. Don't touch adhesive after tearing off the red film for better glue effect.
• Package Content & 100% Satisfactory Service - 1 x 75mm ( 2.95 ) dashboard pad mounting disk, 2 x 70mm (2.76) 3M sticky adhesive replacement,1 x User Manual. Pop-Tech provide 12-month no-worry service and lifetime technical support. Please do not hesitate to contact us if you have any questions and our customer service team is stand by 24 hours of the day to solve your problems. All we want is your satisfaction.
• See more on Amazon...

Features

• [Round Vent Friendly]: Our retractable ac vent clip of our upgraded car phone holder for pops socket can be rotated to adjust the angle and extended the length(11.5 - 39mm), ensures compatibility with 99% vehicle air vent types such as rv, lyft, pickup, van, offroad, truck, easily hook into horizontal, vertical, circular or angled vent leaves, a essentials gadget for automotive driver.
• [Thicker Phone Socket Friendly]: The U shaped flush phone mount for car has a folding air bag that is exactly the same as the collapsable grip, and can fit perfectly regardless of the grip's shape or thickness. Support whether your thick or irregular socket, other phone grip with swappable top or cradit card pops wallet plus for magsafe, phone slide grip, etc.( Note : Center your expanding grip on your cellphone back)
• [Intimate Detail Design]: 1. Premium soft TPU and u-shaped mounted will not scratch the girly grip pattern or surroundings) 2. Edge slot design is flexible for storing charging cable 3.The attachable ball joint adopts standard 17mm and can be combined with different types of accessories 4. Provided 2 pcs adhesive tape glue for your grips, more considerate use experience for auto buddy.
• [Secure & Stable Hold]: Unique ultra-stable clamp hooks onto airvent fan and locks firmly in place while there is no extra gap between airbag layer of the vent mount for car and fashion socket grip, holding smartphone securely, you could anytime enjoy call, music, movies and 360 degree portrait / landscape rotatable handsfree gps navigation, don't have to worry about falling off when driving on bumpy road.
• [Easy to Install]: With the easy-turn knob, assembly can be done in seconds, simply connect the multi angle rotation bracket holder to your adjustable vent, insert and detach your mobile device with the ease of one hand. If there is any quality issues in our minimalist multifunctional car phone cradle set, please contact us, we will provide 24h*7d timely customer service to solve the problem better.
• See more on Amazon...

Features

• Perfect Fit for Socket Top - The multi-function automobile long arm phone holder cutout with u grip and downward shape we design is made of silicon and plastic combination with heat resistant and removable 3m sticker adhesive stick on. Soft silicone accommodate premium socket grips compressed and wallet plus easily slide into the slot hole and quick removal, even won't scratch like the plastic one. Great automotive accessories fit into the official swappable collapsible grips & stand.
• Ingenuity & Double Stability - Extra strong vacuum suction cup with antislip and super stick self-adhesive sticky gel, anti-shake stabilizer prevent android phone from vibrating and shaking, sticking it grasp more stable and lockable, holds up tightly your cell phone/tablet sturdy built in the car dash board or dashboard/window shield or windshield on flat surface on desktop, countertop, desk or multi-surface. Perfect for multipurpose phone holder sliding into the movable expanding grip.
• Multifunctional & Flexible Bendable Arm - Universal long arm socket holder with sticky adhesive pads allows you to attach and adhere to the cellphone within reach and adjust the flex extendable neck. Functional cell phone windshield mount with adhesion support for smart phone. Adjustable goose neck extension longarm can be unobstructed view for safer drive. Heavy duty & handsfree gooseneck phone mount stands cradles meant for truckers staying in luxe socket grips and socket holder attachments.
• 360 Degree Rotation & One-Hand Operation - Portable and adjustable connector can be adjusted to any desired length and switched positions from landscape to portrait mode in the vehicle. Hands free gravity long neck phone holder can be accessible and adaptable for holding GPS navigation on dashboard in the vehicles. Auto clamping bendy and handy extended phone mount-dashboard adheres to the dashboard and keeps mobile phone to fit in the phone holder mounted to the dash for hands-free driving.
• What You Get Combo - Best tropical pop-tech 7.5 inch single 2-in-1 gooseneck long arm phone holders black with space stick to the reusable and washable sucker cup base with anti-shake stabilizer bulk and adjustable arm for women men and works with expanding stand and wallet plus used for android phones, comes with anti-slip mat dashboard pad mounting disk, multipack sizes of round pad sticky adhesive replacements, usable 5 pcs wipe pads.
• See more on Amazon...

Features

• DESIGNED FOR SOCKET WALLET SERIES BASE 9 PACK 3M VHB adhesive for Oval Base of Socket Wallet and Socket Wallet Plus, exclusively designed for smartphone socket wallet, perfect replacement kits for socket wallet users. When your socket wallet loses its viscosity, these swappable high bond backup installation adhesives are a great choice for re-sticking / re-using it.
• HIGH STICKINESS Super double-sided polygon cellphone wallet replacement adhesion strip's stickiness is 40% stronger than original 2 sided tape sticky glue, and it is high temperature resistance(120 +). They are sturdy and durable, and repositionable features bring convenience to your mobile phone wallet usage.
• EASY TO USE The 3M adhesive can be easily re-installed in the socket wallet without tools. (1) 9pcs clear protective film provided, protect your phone from scratch, only need to peel off the protective film when removing the socket wallet adhesive, WITHOUT RESIDUE. (2) 6pcs wipe pads provided, please wipe the phone wallet base and the surface of the phone case carefully before sticking.
• NOTE (1) Please wait 24 hours to ensure that the sticker has the optimal adhesion after stuck. (2) Please do not stick the clear protective film or 3M adhesive to SILICONE, HIGHLY TEXTURED, and SOFT case. (3) Make ensure the desired surface is wiped and dry. (4) Do not touch the adhesive gel directly with hands. (5) Each 3M VHB rubber adhesive is for one-time use.
• WARRANTY Pop-tech products provide 12 months worry-free after-sales warranty service (extended from 12 months to 18 months if you contact customer service with any problem). Compatible with Any cell phone, Tablets, IOS, Android, iPhone, Samsung, Lenovo, Google, Sony, LG, HTC, TCL, XIAOMI, HUAWEI, HONOR, ONEPLUS, MOTOROLA, iPhone 14, 14 Plus, 14 Pro, 14 Pro Max, iphone 13 Series, 12, 12 Pro Max, 11, Xs, XR, X, SE, etc.
• See more on Amazon...

Features

• High Quality Plastic Biconvex Lenses for better 3D experience.
• Great to work for DIY Google Cardboard VR Project telescope.
• One side of the lens is curved and the other side is a little flatter. Fit perfectly for VR goggle and virtual glasses.
• Package includes 2 piece of double-convex biconvex lens.
• See more on Amazon...

Features

• Correct Installtion The magnetic part with pop-tech logo should be placed with your back to the laptop screen, that is, the computer screen should be in the same direction as the rear camera of phone, so that the weight of phone can keep the clip tightly hook onto the pc monitor.
• Rotatable & Adjustable This mountable continuity camera mount for iphone has 360 rotation ball joint and tiltable design that make it different. You can adjust or tilt the angle, making the field of vision higher and wider to meet simultaneous face and overhead desk display.
• Portable - Storage Box Provided The laptop phone holder is lightweight and carried with MacBook. We provide a nifty hard shell carrying case, perfect for you to use iphone mount for MacBook anywhere, including Zoom, FaceTime, Teams, Google Meet or live streaming on Twitch, YouTube, TikTok, Instagram.
• Stable & Secure The straightforward snap slot design of iphone webcam mount can easily connect cellphone to monitor, turn iphone into a webcam, keep it stable and prevent from falling when the screen is moved. Smooth scratch-free hang on will not harm notebooks. Note: for Macbook Air, Macbook Pro.
• Magsafe-compatible The brilliant iphone mount with magsafe for mac notebooks designed for iPhone 12, 13 & 14 15 models, iOS 16 or magnetic case, normal case with metal ring. Has a strong magnetic attachment, can hold your phone firmly and won't fall off, easily rotate your iphone to either landscape or portrait.
• Removable & Versatile Use When this magnetic phone holder for laptop doesn't need to connect to Mac laptop, it's detachable and can be a desktop stand to prop up phone horizontally or vertically, making it more convenient for watching videos, online meeting.
• What You Will Get 1 * Innovative Cam Mount for iPhone MacBook , 1 * Fixing nut,1 * Storage box, 2 * Metal rings, 4 * Alignment cards and other accessory. We provide 1 year warranty, if need any help with this streaming equipment, please feel free to contact pop-tech.
• Warm Tips of Webcam Monitor Mount 1.Using a laptop monitor protective case is not recommended. 2. It's not for imac or monitors of other brand. 3. If your iphone with case, please make sure it's mag safe case.
• See more on Amazon...

Features

• High definition bigger biconvex lenses with high quality, optically give you a better 3D experience.
• Small double-convex 34mm lenses diameter. Made of plastic and clear and work well for making google cardboard headset devices and VR goggle project and virtual glasses. The lens does not come with tabs so just had it sandwiched between cardboard layers.
• Focal distance is roughly 45mm focal length and magnifying glass optic lens microscope with magnification feature.
• Great to use for DIY Google Cardboard VR Project. One side of the lens is curved and the other side is a little flatter. Fit perfectly for Google Cardboard V2.
• Package includes 1 pair of Biconvex Lens.
• See more on Amazon...

Features

• Magic Mount Magnet : Phone metal plate for magnetic mount are NOT MAGNETIZED, which are just iron plates to WORK WITH various magnetic car holders. Our adhesive metal plates suit all kind of automobile magnetic magic mount. Metal plate for magnetic car mount is universal to place smartphone horizontal or vertical under the strong magnetism between magnets and phone magnetic plate.
• Cell Phone Magnetic Plate For Multiple Devices :10 pack magnetic plate kit can go with multiple devices. Phone case magnet plate thin have two shapes, for all phone / case and mobile phone magnet vehicle mounts. Circle medal slim metal phone plates have 2 sizes, smaller ones are pretty accurate size for regular basic swappable socket expanding grips whose top is flat. Bigger mount metal plate for smaller mobile phones. Rectangle magnetic plates can attach perfectly on the bigger cell phones.
• Adhesive Metal Plate for Magnets :Magnetic phone mount plate with premium stickiness double-sided 3M adhesive backer, which is attachable to all magnetic mobile phone magicmount. Please place 3M self adhesive metal plate sheet on the phone away from wireless charger sensor. Or apply replacement magnet for car mount to phone case, and remove case while charging. Magnet plate for phone hold firmly and won't fall off on rugged, bump bumpy road once glued due to powerful magnetic force.
• Smooth Edge & Clear Films Provided : Thanks to unique polishing process, polished edge of phone magnet plate is smooth and anti-scratch. You won't get you fingers scratched like other brands magnetic phone plate. Magnetic plate for phone mount come with additional transparent films, which help metal disc adhere better to SILICONE case. Stick protective films then attach the metal plate, and it is non-scratch for your phone to remove the spare metallic disk piece or sticky residue left.
• No Risk Purchase : 4 x Rectangle magic plate, 4 x 1.89 inch round magicplate, 2 x 1.57 inch round magnetic plate for phone mount, 2 x protective clear films. We provide 12-month warranty and 30 days money-back guarantee. Any dissatisfaction with your purchase, just contact us and we will give you satisfied solution immediately.
• See more on Amazon...

Features

• 6 pack of heavy duty circle 3M VHB extra sticky adhesive stickers replacement compatibles with your CD slot magnetic car phone mounts and magnetic air vent mounts. Note: it does not come with magic mount cradle-less. Restickable small replacement 3M tapes to share with family members or friends. Great both side self stick tiny 3M double sided sticker adhesive dots to make your mobile phone car mount reusable and durability of 3m glue dots adhesive sticker part replace for car mount base.
• 6 pack replaceable and removable pre-cut thin adhesive plates attraction support for multiple magnets devices. 4 pack extra strong strength round metal mounting plates have built-in 3M adhesive bonding gel sticky back which can be worked with all dash magnetic car mounts to hold any size of smartphones firmly even in bumpy roads. Huge size 2 pieces of detachable large rectangle magnet plates strips stick for cellphone or tablet is exclusively designed to better hold the larger and heavy phone.
• 6 pack of double stick and blank protective films liner design to protect your device from scratching. It also helps you to easily remove the magnet plate patches from your phone without leaving any residue. First adheres the circular protective film on the back of your phone before sticking the metal plate tags. Extra large rectangular plates sticks it to use with other devices like holding up on cameras, light monitors, in the kitchen, packet, livingroom chair, desk, desktop, emergency light.
• 2 piece of wipe pads can wipe the surface where you attach your magnetic car mount. You may use the extra wipe pad to wipe the mounting surface for better result. Different sizes of lightweight metal plates thingy refill for various cell phone. For wireless charging, we suggest to use the ultra thin iron sheet patch with very sticky adhesive patch stuck on the outside of phone case.
• This single set of superior universal accessories kits things bulk is exclusively designed for thick magnetic car mount and includes everything you need to work with only magnet mount. Great replacement car mount accessories pack just reuse to extend the service life of your magnetic car mount.
• See more on Amazon...

Features

• Stand for MagSafe Charger : Pop-tech magsafe charger stand is exactly designed for Apple MagSafe wireless magnetic charger accessories. This magsafe stand is compatible with iPhone 14, iPhone 14 Pro, iPhone 14 Pro Max, iPhone 13 , iPhone 13 Pro, iPhone 13 Pro Max, iPhone 13 Mini, iPhone 12 Pro Max, iPhone 12 Pro, iPhone 12, 12 Mini. Please NOTE: MagSafe charger is not included.
• Perfect Fit & No Scratch : Our magsafe charging stand is specially designed with white round silicone cover and power cord slot. The rubber cover pad gives your magsafe a perfectly snug fit without scratching, snap your charger securely. The slot allows cable to be storaged behind the stand and freely bent at any angle you want. No damage to charger.
• Sturdy & Anti-Slip : Made of well made and thick aluminum alloy, our magsafe holder support your iPhone firmly without wobbling or falling. The bottom non-slip silicone pad can reliably hold the cradle in place. Sleek shape design yet solid craftsmanship is a practical and stylish using for home and office desktop.
• User-Friendly Viewing Angle : Appropriate 60-degree fixed angle provide you with the most comfortable viewing experience, not only ergonomic eye level height but also free your hands. An ideal magsafe dock for Unlocking Face ID, Online Meeting, Surfing the Internet, Watching videos, Reading recipes in kitchen Face time with families and friends etc.
• One-Hand Operation : Only few seconds, super easy to install or remove your magsafe charger to this magsafe phone stand with specially designed rear slots. iPhone can be adjusted in either landscape or portrait position to meet your needs with one hand operation.
• After Sale Service : Pop-Tech provides 12-MONTH WARRANTY and Lifetime technical support for best after-sale service. If you have any questions please contact us for a satisfied reply. Note: 1. Only work with Apple's Original MagSafe charger; 2. WITHOUT the MagSafe Charger and Cable.
• See more on Amazon...

Features

• Strong Suction Cup pop-tech universal dashboard car phone mount features super strong suction-cup power. High-quality sticky gel base of suction cup mount is much more heat resistant than others, which means this windshield / dash car holder can stay in place stably even in the summer. Reusable and washable suction cup gel for durable use. No worry for high stickiness cellphone bracket to fall down on the rugged or uneven road. Enjoy your safe and easy driving!
• Stable & Secure Strong sticky suction cup is anti-slip and attaches firmly on dash. Powerful suction cup and self-tight spring embedded maximizes the stability and durability to attach to dash tightly. Tight knobs and firm locking suction cup keep your phone stable all the way and sits right where you set it. This car dashboard phone holder offers multiple protection. Soft Silicon padded back and feet of the mount ensures no scratch to phone.
• Flexible & Adjustable This hang down suction cup phone holder for car offers you clear unblocked view, doesn't block vent. 120 adjustable long arm and 360 flexible swivel joint ball help to find your ideal view angle. Sturdy curved down long arm car phone suction cup mount focus on your safety, upgraded style prevents shaking and tilting no matter you rotate phone vertically or horizontally. No blocking sight is useful for truck, uber, lyft and cab drivers.
• Easy To Use Install the stick on dash holder, no tools needed! Choose flat and smooth spot dash / window,clean it. Stick dashboard pad mounting disk first, then adhere the base and wait for 2 days before putting you phone in. One click quick release button to insert or retrieve your phone in seconds.
• What You Get Universal suction cup phone holder for car *1; Dashboard pad mounting disk (2.95 in) *1; User manual *1. This hands free dashboard windshield mount makes it easy to read navigation, APP, Spotify, communication. Your 100% satisfaction is always our priority. Don't hesitate to contact us. NO-RISK PURCHASE! UNCONDITIONAL 30-DAY MONEY BACK GUARANTEE. We are here 24 hrs to serve you :-).
• See more on Amazon...

Features

• For all the computer geek gifts nerdy gifts for women tech gifts for women lover grab this cellphone popper with a great and unique pattern design to make your cell phone or tablet look beautiful and for a comfortable grip
• This cute gifts for tech guys accessory stocking stuffers expanding stand is the perfect accessory to match with your t shirt gift idea for yourself or your best friend cool white soporte para celular
• PopGrip with swappable top; switch out your PopTop for another design or remove it completely for wireless charging capabilities. (Not compatible with Apple MagSafe wireless charger or MagSafe wallet.)
• Expandable stand to watch videos, take group photos, FaceTime, and Skype handsfree.
• Advanced adhesive allows you to remove and reposition on most devices and cases.
• Note: Will not stick to some silicone, waterproof, or highly textured cases. Works best with smooth, hard plastic cases. Will adhere to iPhone 11, but not to the iPhone 11 Pro nor the iPhone 11 ProMax without a suitable case.
• See more on Amazon...

Features

• Adjustable Metal Clip : The upgraded four-point positioning vent clip is 0.33 inch longer than others, which can better clamp firmly for car mount into vent, never dropping even if heavy cellphone on bumpy roads. This vent mount doesn t block the vent blades, works with both horizontal and vertical vent in any automobile. And 360 rotation make driver can adjust suitable angles according to the vent blade.
• Universal Compatible: This flexible car phone mount solves the problem that old model can only fix thin socket grip, exclusively designed for most flat and thick one on the back of phone, such as phone grip with swappable top, phone wallet (credit card holder) with expanding grip, collapsible grip for magsafe, slide stretch grip, etc. Perfect fit for socket users!
• Deep U Shaped : Unique design perfect match with the expanded socket girp, keep your phone upright without flipping, more stable when driving. This waterproof hands free phone mount make phone easily switch between portrait or landscape mode when GPS navigation or enjoy music, give you a safer and convenient driving experience.
• Premium Material: The car vent mount is made of soft PU, won't easy to wear and tear, won't easily break like the plastic one in the market, can be used for a long time. More importantly, it won't scratch the beautiful surface of socket grip. Dust proof and easy to clean.
• What You Will Get: Package includeds a clamp mount with metal hook, 2 * 35mm sticky adhesive, 2 * alcohol pads. We provide six-months warranty, if need any help with this air vent holder, please feel free to contact pop-tech.
• See more on Amazon...

Features

• Get this awesome Girl Power tech accessory and show the world just what a powerful girl or woman looks like.
• Stand up for womens equal rights with this cool cell phone or tablet accessory.
• PopGrip with swappable top; switch out your PopTop for another design or remove it completely for wireless charging capabilities. (Not compatible with Apple MagSafe wireless charger or MagSafe wallet.)
• Expandable stand to watch videos, take group photos, FaceTime, and Skype handsfree.
• Advanced adhesive allows you to remove and reposition on most devices and cases.
• Note: Will not stick to some silicone, waterproof, or highly textured cases. Works best with smooth, hard plastic cases. Will adhere to iPhone 11, but not to the iPhone 11 Pro nor the iPhone 11 ProMax without a suitable case.
• See more on Amazon...