Frontpage > Car & Automotive > Motorcycle & Powersports > Jets & Jet Kits

Best Jets & Jet Kits - Buying Guide

Last Updated: 06/25/2019

Share on


  #1

KIPA 10Pcs Carburetor Main Jet kit & 10Pcs Slow Pilot Jet for PWK Keihin OKO CVK PWM

 Ean: 0755320682732   |    PartNumber: Jet kit   |   Asin: B07D3RPWXL

Fitment:
Fits most Chinese scooters, ATVs, and Karts with 125cc,150cc GY6 motors
Also will for other brand PWK, CVK, PE type carburetor. OKO, KOSO, Stage-6, Polini ....etc
Slow/Pilot Jet for Keihin PWK type CVK type PE etc. carburetor.
Carburetor Main Jet kit for 150cc and 125cc GY6 carburetors.

DO NOTE: Not for CV ,VE & CVK above 30 mm carburetor.

Dimensions:
Thread Size: M5x0.80
Overall Length: 8mm
Thread: M6 x 0.75mm
28mm total length with a 5mm round head

Package content:
Comes in 20 pieces, including the following sizes packed in a small plastic case:
10 pcs Slow/Pilot Jet: #32, #35, #38, #40, #42, #45, #48, #50, #52, #55
10 pcs Carburetor Main Jet: #100, #105, #108, #110, #115, #120, #125, #130, #135, #140
1 piece for each size.
Please check pictures for more details.

NOTE:
Please make sure the part numbers match the part you are replacing.
Please check our photos and make sure the part shown looks identical to your stock one.

Features

  • Package including 10pcs Carburetor Main Jet &10 pcs Slow/Pilot Jet
  • Fits most Chinese scooters, ATVs, and Karts with 125cc,150cc 200cc 250cc GY6 motors Carburetors, Packed in a small plastic case
  • Carburetor main jets for KTM KAWASAKI SUZUKI YAMAHA ATV Pit dirt bike Etc Thread Size: M5x0.80 Overall Length: 8mm Thread: M6 x 0.75mm 28mm total length with a 5mm round head
  • 10 pcs Slow/Pilot Jet: #32, #35, #38, #40, #42, #45, #48, #50, #52, #55
  • 10 pcs Carburetor Main Jet: #100, #105, #108, #110, #115, #120, #125, #130, #135, #140
  • See more on Amazon...

Brand: KIPA   |   Manufacturer: KIPA

Package Dimensions: 0.75 x 5.47 x 5.55 inches (1.9 x 13.9 x 14.1 cm)

Amazon Price: $10.75 | as of 06/25/2019(3:16pm pst)
Availibility: Usually ships in 24 hours
List Price: $13.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

(10pcs Set) Slow/Pilot Jet for PWK OKO CVK 32,35,38,40,42,45,48,50,52,55

 Ean: 6971216076667   |    PartNumber: does not apply   |   Asin: B07HDY8M4Y

For: Keihin PWK type CVK type PE .....etc carburetor. Also will for other brand PWK, CVK, PE type carburetor. OKO, KOSO, Stage-6, Polini ....etc NOTE: Not For CV ,VE & CVK Above 30 mm Carburetor. Thread: M6 x 0.75mm 28mm total length with a 5mm Round Head Available in 10 Piece Includes the following size: #32 #35 #38 #40 #42 #45 #48 #50 #52 #55 10pcs set has 1 of each size. Size is written on each jet.

Features

  • For: Keihin PWK type CVK type PE .....etc carburetor.
  • Also will for other brand PWK, CVK, PE type carburetor. OKO, KOSO, Stage-6, Polini ....etc
  • NOTE: Not For CV ,VE & CVK Above 30 mm Carburetor.
  • Includes the following size: #32 #35 #38 #40 #42 #45 #48 #50 #52 #55
  • See more on Amazon...

Brand: labwork-parts   |   Manufacturer: does not apply

Package Dimensions: 0.2 x 3 x 4.1 inches (0.5 x 7.6 x 10.4 cm)

Amazon Price: $8.99 | as of 06/25/2019(3:16pm pst)
Availibility: Usually ships in 24 hours
List Price: $8.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

02-08 HONDA CRF450R: R&D Flex Jet Fuel Mixture Screw

 Ean: 0696749381533   |    PartNumber: 71113   |   Asin: B005UGFIYC

A simple, effective, flexible shaft design that is the new industry standard.
Fits:
HONDA
CRF150R 07-19, CRF150RB 07-19, CRF250R 04-09, CRF250X 04-17, CRF450R 02-08, CRF450X 05-17, TRX450ER 06-14, TRX450R 06-09
KAWASAKI
KLX450R 08-09, KX250

Features

Brand: R&D Watercraft   |   Manufacturer: R&D

Item Dimensions: 1.6 x 8.5 x 2.9 inches (4.1 x 21.6 x 7.4 cm)   |   Package Dimensions: 1.5 x 5.8 x 8.9 inches (3.8 x 14.7 x 22.6 cm)

Amazon Price: $23.79 | as of 06/25/2019(3:16pm pst)
Availibility: Usually ships in 24 hours
List Price: $26.29

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

EXUP Eliminator for Yamaha

 Ean: 0855080008091   |    PartNumber: EXUP-Y   |   Asin: B07BGCH43M

Simple plug-and-play application prevents the check engine light from being activated when using a racing exhaust. Unlike other similar products, this product uses an internal microprocessor which allows your fuel map to run as the factory intended and not produce an altered, flat, or incorrect fuel map. Made In USA. Fits the following motorcycle models: Yamaha APEX [Snowmobile] (2011-2018) Yamaha FZ1 (2006-2015) Yamaha FZ10 (2017-2018) Yamaha FZS1 (2015) Yamaha MT-10 (2018) Yamaha R1 (2002-2018) Yamaha R1M (2015-2018) Yamaha R1S (2016-2018) Yamaha R6 (2006-2018) Yamaha Raider (2008-2017) Yamaha V-Max (2009-2018) Yamaha WR250R (2008-2018) Yamaha WR250X (2008-2018) Yamaha WR25R (2014-2018) Yamaha XV19 [All Models] (2006-2017)

Features

  • Simple plug-and-play application prevents the check engine light from being activated when using a racing exhaust.
  • Unlike other similar products, this product uses an internal microprocessor which allows your fuel map to run as the factory intended and not produce an altered, flat, or incorrect fuel map.
  • Compatible with Yamaha part numbers 2CR-85820-00-00, 2D1-85820-00-00, 2C0-85820-00-00, 5VY-85820-00-00, 5VY-85820-10-00; and will fit other Yamaha models with same type servo motor plug.
  • See more on Amazon...

Brand: SpeedoDRD   |   Manufacturer: SpeedoDRD

Package Dimensions: 0.63 x 5.87 x 9.09 inches (1.6 x 14.9 x 23.1 cm)

Amazon Price: $54.95 | as of 06/25/2019(3:16pm pst)
Availibility: Usually ships in 24 hours
List Price: $54.95

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

GTSpeed PWK 122/125/128/130/132/135/138/140/142/145 Carburetor Main Jet Kit Set

 Ean: 0685987785371   |    PartNumber: O-PWK-JET   |   Asin: B07H86RF6K

PWK Main Jet Kit

#122 #125 #128 #130 #132 #135 #138 #140 #142 #145

Set of 10

Made in Taiwan

Features

Brand: GTSpeed   |   Manufacturer: GTSpeed

Package Dimensions: 0.4 x 2 x 3.5 inches (1.0 x 5.1 x 8.9 cm)

Amazon Price: $14.50 | as of 06/25/2019(3:16pm pst)
Availibility: Usually ships in 24 hours
List Price: $14.50

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

Keihin 99101-116 Series Main Jet 75 - Fits: Honda CRF110F 2013-2018

 PartNumber: 019-865   |   Asin: B003O75GSC

Keihin 99101-116 Series Main Jet 75 - Fits: Honda CRF110F 2013-2018.

Features

Brand: Keihin   |   Manufacturer: Keihin

Amazon Price: $14.74 | as of 06/25/2019(3:16pm pst)
Availibility: Usually ships in 24 hours
List Price: $14.74

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

TC-Motor Main Jet Set 155/158/160/162/165/168/170/172/175/178 Pilot Slow Jet 21 Series #32 - #55 For Keihin PWK PE OKO KOSO Carb

 Ean: 0778601414594   |    PartNumber: TC-Motor   |   Asin: B07PNQ2W9S

Features

  • Fitment: Main Jet Set 155/158/160/162/165/168/170/172/175/178 For Keihin PWK PE OKO KOSO
  • Pilot Slow Jet 21 Series #32 - #55 For Keihin Carburetor PJ PWK PWM PE PD Carbs
  • Technical Specifications Of Main Jets: 1. Size Same As Keihin 99101-357 Main Jet 2. 16.5mm In Length With A 6mm Round Head 3. Thread: 5mmx0.8 4. The Length Of thread: 5mm 5. Package Includes 1 Each Of Following Sizes 155, 158, 160, 162, 165, 168, 170, 172, 175, 178
  • Techinical Specifications Of Slow Jet: 1. Same Size As Keihin N424-21 Slow Jet 2. 28mm In Length With A 5mm Round Head 3. The Diameter Of Thread Is 6mm x 0.75 4. Package Includes 1 Each Of Following Sizes 32 35 38 40 42 45 48 50 52 55 The Number Stampped On Each Jet.
  • Package Include: 20pcs Jets / 1pc Bottle Opener
  • See more on Amazon...

Brand: TC-Motor   |   Manufacturer: TC-Motor

Package Dimensions: 0.94 x 3.86 x 4.76 inches (2.4 x 9.8 x 12.1 cm)

Amazon Price: $17.95 | as of 06/25/2019(3:16pm pst)
Availibility: Usually ships in 24 hours
List Price: $17.95

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

Suzuki DRZ400S DRZ400 DRZ 400 S Custom Pilot Main Carburetor Carb Stage 1-7 Jet Kit

 Ean: 0722301178706   |    PartNumber: SI0001371   |   Asin: B006QZERB6

Installing a jet kit in your carb is the best way to get the maximum performance and longest life out of your bike. The stock carburetor from the factory is designed to meet Import Regulations ... not peak performance. Once you install or modify an exhaust or intake, you have put your bike into a leaner condition that will eventually destroy your engine due to heat from running lean. If you notice any popping, you are extremely lean. Our jet kit provides the parts and installation instructions to enrich all the circuits in the carb, to fix this problem, and add performance you can feel in the seat. This is a comprehensive jet kit, addressing all throttle positions, throttle response, and each kit is custom made to your bike and its modifications. Replacing just the jets does not address 1/4-3/4 throttle position, or throttle response, only full throttle. 1 KIT IS FOR THE ENTIRE BIKE, ALL CARBS ON THE BIKE. Benefits: More Peak Horse Power - (Designed to gain 6%-8% in HP with intake/exhaust, 2-3% on bone stock.) Longer Engine Life- (The jet kit is a performance upgrade that allows the engine to run cooler which increases engine component life.) Increased Performance- (Designed to improve all RPM ranges of performance and throttle response.) Lower EGT's (exhaust gas temperatures) If you have installed an aftermarket, or modified the stock exhaust or intake, this is needed or you will damage your engine. Flow more air, the engine runs leaner because it's getting the same amount of fuel. Running lean causes detonation and hotter EGT's which ruin exhaust valves and destroy engines. Kit Includes: Main Jets, Needle Adjusters, Nylon Spacers, Drill Bits for: Slide Hole Mod, Slide Spring Mod, Idle Mixture Mod, Bike Specs, Carb Schematic, Carb Synchronizer Tool (how to build for $5), Step by step instructions customized to your bike.

Features

  • Increased Performance at all RPM's, Faster Throttle Response, & Stops Lean Exhaust Popping that Damages Engines.
  • Each Jet Kit is Custom Made to your Specifications for Optimum Performance, When You Order, Please EMAIL US FIRST through Amazon with Your Exact Year, Model, Modifications Made, & Elevation, So we can Design, Build, & Ship Your Kit.
  • The kit comes with complete instructions for installation. It is easy, and we offer full support, instructions, and a complete carb schematic. Only basic hand tools are required.
  • Kit Includes: Main Jets, Pilot Jet, Needle Adjusters, Accelerator Pump Modification, Nylon Spacers, Drill Bits, 3x3 Airbox Modification, Exhaust Modification, Slide Hole mod (with CV carb), Idle Mixture mod, Slide Spring Mod (with CV carb), Carb Schematic, Specifications, Carb Sync Tool build, Carb Cleaning Procedure, Proper Tuning Techniques, and step by step instructions with photos.
  • We give a 100% Satisfaction Guarantee. Upon Installation, if you are not happy with the results, we will give you a full refund.
  • See more on Amazon...

Brand: 6 Sigma   |   Manufacturer: 6 Sigma

Amazon Price: $39.50 | as of 06/25/2019(3:16pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $39.50

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

MAIN & INTERMEDIATE JET ASSORTMENT KIT FOR S&S SUPER E, B CARB CARBURETOR HARLEY

 Ean: 0601285655437   |    PartNumber: 35-0995   |   Asin: B00TKNGUCK

Package unsealed, never installed, looks like new.





Includes: 7 intermediate jets and 12 main jets

one each intermediate jets: .025", .0265", .028", .0295", .031", .032", .033"

and one each main jets: .062", .064", .066", .068", .070", .072", .074", .076", .078", .080", .082", .084".




Product Fitment: Replacement application for S&S "B" and "E" carburetors




NOTE: Engine tuning should only be performed by experienced mechanics as a "too-lean" condition can melt pistons and a "too-rich" condition can lead to excessive component wear and failure. Always do frequent plug checks or O2 measurements when making any carb adjustment

Features

  • Package unsealed, never installed, looks like new.
  • Guaranteed cool for your chopper, bobber or cruiser
  • Perfect for dialing in performance on Harley's and custom v-twin applications
  • Aftermarket carburetor main jet replacement assortment is for S&S B, G and E carburetors
  • Includes: 7 intermediate jets and 12 main jets
  • See more on Amazon...

Brand: V-TWIN MANUFACTURING   |   Manufacturer: V-TWIN

Amazon Price: $39.99 | as of 06/25/2019(3:16pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $39.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

Bicycle Motor Works H60-JET - Fine Tuning Jet Set - High 60's (Pack of 5)

 PartNumber: H60-JET   |   Asin: B00VERAMFQ

5mm Fine Tuning Jet Set fits Dellorto SHA 15/15 Carburetors and many others! Your set will include one of each of the following sizes. .66, .67, .68, .69, .70

Features

Brand: Bicycle Motor Works   |   Manufacturer: Bicycle Motor Works

Amazon Price: $10.99 | as of 06/25/2019(3:16pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $10.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

Dynojet-Harley Power Vision Fl-Blk J1850 PV-1B

Model: 1020-2324   |    Mpn: 1020-2324   |    Ean: 3665986821482   |    PartNumber: 1020-2324   |   Asin: B00T6JKSD0

Power Vision is the most powerful and quickest flash tuning device for Harley-Davidson motorcycles in the market today. It is a performance tuner and data monitor that offers the latest flash tuning technology, data logging, and other industry exclusive features. The Power Vision can tune any fuel injected Harley-Davidson motorcycle with the Delphi ECM , including 2016 models. The Power Vision Product Suite includes a full color touch screen flash device, built in Auto Tune Basic Mode*, vehicle interface cable, and WinPV (Windows PC based tuning application). The Power Vision incorporates a very sophisticated, yet simple touch screen display that DOES NOT require the use of a computer to flash your bike or to use Auto Tune*! Simply select the tune, follow the on-screen prompts to download the tune, and if you'd like, edit your tune without ever touching a computer! That's right, you can flash and make changes to your tune without ever getting off your bike.

Features

  • Size: One Size
  • Style: FUEL INJECTION KITS
  • Color: BLACK
  • Warranty: Warrantied against defects in material and workmanship for the period of one year from purchase to the original purchaser. Power Commanders shipped out of the USA are not warrantied.
  • See more on Amazon...

Brand: DYNOJET-HARLEY   |   Manufacturer: DYNOJET-HARLEY

Package Dimensions: 2.6 x 5.31 x 7.56 inches (6.6 x 13.5 x 19.2 cm)

Amazon Price: $429.00 | as of 06/25/2019(3:16pm pst)
Availibility:
List Price: $429.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

Dynojet Power Commander V w/ Ignition Adjustment and O2 Oxygen Optimizer 17-033

Model: 17-033   |    Mpn: 17-033   |    PartNumber: 17-033   |   Asin: B0067ERAFG

PC 5 offers reduced size from PC 3 USB (less than half of the size of PC 3) USB powered from computer (9 volt adapter is no longer needed for programming) 2 position map switching function built in (map switch not included) Gear/Speed input (allows for map adjustment based on gear and speed) Analog input (allows user to install any 0-5 volt sensor and build an adjustment table based on its input such as boost or temperature) With gear position input connected the PCV is capable of allowing each cylinder to be mapped individually and for each gear (for example: on a 4 cylinder bike with a six speed transmission there could be up to 24 separate fuel tables). Unit has a -100/+250% fuel change range (up from -100/+100%). This allows more adjustment range for 8 injector sportbikes 10 throttle position columns (up from 9 on PCIIIusb) Enhanced accel pump utility (increased adjustment and sensitivity ranges) **Notes: Not legal for sale or use on pollution controlled vehicles Aprilia RSV4 model includes S.F.M. If you use a Power Commander outside the USA and you need warranty repair, you will have send back to USA for repair.

Features

Brand: Dynojet   |   Manufacturer: Dynojet Research

Item Dimensions: 6 x 6 x 6 inches (15.2 x 15.2 x 15.2 cm)   |   Package Dimensions: 3.5 x 8.9 x 9.1 inches (8.9 x 22.6 x 23.1 cm)

Amazon Price: $319.99 | as of 06/25/2019(3:16pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $319.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

Kawasaki KLX140 KLX140L KLX 140L 140 L Custom Carburetor Carb Stage 1-7 Jet Kit

 Ean: 0722301173657   |    PartNumber: SI0000866   |   Asin: B006QZEJO6

Installing a jet kit in your carb is the best way to get the maximum performance and longest life out of your bike. The stock carburetor from the factory is designed to meet Import Regulations ... not peak performance. Once you install or modify an exhaust or intake, you have put your bike into a leaner condition that will eventually destroy your engine due to heat from running lean. If you notice any popping, you are extremely lean. Our jet kit provides the parts and installation instructions to enrich all the circuits in the carb, to fix this problem, and add performance you can feel in the seat. This is a comprehensive jet kit, addressing all throttle positions, throttle response, and each kit is custom made to your bike and its modifications. Replacing just the jets does not address 1/4-3/4 throttle position, or throttle response, only full throttle. 1 KIT IS FOR THE ENTIRE BIKE, ALL CARBS ON THE BIKE. Benefits: More Peak Horse Power - (Designed to gain 6%-8% in HP with intake/exhaust, 2-3% on bone stock.) Longer Engine Life- (The jet kit is a performance upgrade that allows the engine to run cooler which increases engine component life.) Increased Performance- (Designed to improve all RPM ranges of performance and throttle response.) Lower EGT's (exhaust gas temperatures) If you have installed an aftermarket, or modified the stock exhaust or intake, this is needed or you will damage your engine. Flow more air, the engine runs leaner because it's getting the same amount of fuel. Running lean causes detonation and hotter EGT's which ruin exhaust valves and destroy engines. Kit Includes: Main Jets, Needle Adjusters, Nylon Spacers, Drill Bits for: Slide Hole Mod, Slide Spring Mod, Idle Mixture Mod, Bike Specs, Carb Schematic, Carb Synchronizer Tool (how to build for $5), Step by step instructions customized to your bike.

Features

  • Increased Performance at all RPM's, Faster Throttle Response, & Stops Lean Exhaust Popping that Damages Engines.
  • Each Jet Kit is Custom Made to your Specifications for Optimum Performance, When You Order, Please EMAIL US FIRST through Amazon with Your Exact Year, Model, Modifications Made, & Elevation, So we can Design, Build, & Ship Your Kit.
  • The kit comes with complete instructions for installation. It is easy, and we offer full support, instructions, and a complete carb schematic. Only basic hand tools are required.
  • Kit Includes: Main Jets, Pilot Jet, Needle Adjusters, Nylon Spacers, Intake Modification, Exhaust Modification, Drill Bits, Slide Hole mod (with CV carb), Idle Mixture mod, Slide Spring Mod (with CV carb), Carb Schematic, Specifications, Carb Sync Tool build, Carb Cleaning Procedure, Proper Tuning Techniques, and step by step instructions with photos.
  • We give a 100% Satisfaction Guarantee. Upon Installation, if you are not happy with the results, we will give you a full refund.
  • See more on Amazon...

Brand: 6 Sigma   |   Manufacturer: 6 Sigma

Amazon Price: $39.50 | as of 06/25/2019(3:16pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $39.50

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

Suzuki Savage LS650 LS 650 S40 6 Sigma Custom Main Pilot Carburetor Carb Stage 1-7 Jet Kit

 PartNumber: SI0002038   |   Asin: B00GGXG7M0

Installing a jet kit in your carb is the best way to get the maximum performance and longest life out of your bike. The stock carburetor from the factory is designed to meet Import Regulations ... not peak performance. Once you install or modify an exhaust or intake, you have put your bike into a leaner condition that will eventually destroy your engine due to heat from running lean. If you notice any popping, you are extremely lean. Our jet kit provides the parts and installation instructions to enrich all the circuits in the carb, to fix this problem, and add performance you can feel in the seat. This is a comprehensive jet kit, addressing all throttle positions, throttle response, and each kit is custom made to your bike and its modifications. Replacing just the jets does not address 1/4-3/4 throttle position, or throttle response, only full throttle. 1 KIT IS FOR THE ENTIRE BIKE, ALL CARBS ON THE BIKE. Benefits: More Peak Horse Power - (Designed to gain 6%-8% in HP with intake/exhaust, 2-3% on bone stock.) Longer Engine Life- (The jet kit is a performance upgrade that allows the engine to run cooler which increases engine component life.) Increased Performance- (Designed to improve all RPM ranges of performance and throttle response.) Lower EGT's (exhaust gas temperatures) If you have installed an aftermarket, or modified the stock exhaust or intake, this is needed or you will damage your engine. Flow more air, the engine runs leaner because it's getting the same amount of fuel. Running lean causes detonation and hotter EGT's which ruin exhaust valves and destroy engines. Kit Includes: Main Jets, Needle Adjusters, Nylon Spacers, Drill Bits for: Slide Hole Mod, Slide Spring Mod, Idle Mixture Mod, Bike Specs, Carb Schematic, Carb Synchronizer Tool (how to build for $5), Step by step instructions customized to your bike.

Features

  • Increased Performance at all RPM's, Faster Throttle Response, & Stops Lean Exhaust Popping that Damages Engines.
  • Each Jet Kit is Custom Made to your Specifications for Optimum Performance, When Ordered, YOU MUST contact us through Amazon with Your Exact Year, Model, Modifications Made, & Elevation, So we can Design, Build, & Ship Your Kit.
  • The kit comes with complete instructions for installation. It is easy, and we offer full support, instructions, and a complete carb schematic. Only basic hand tools are required.
  • Kit Includes: Main Jets, Pilot Jet, Needle Adjusters, Nylon Spacers, Drill Bits, Slide Hole mod (with CV carb), Idle Mixture mod, Slide Spring Mod (with CV carb), Carb Schematic, Specifications, Carb Sync Tool build, Carb Cleaning Procedure, Proper Tuning Techniques, and step by step instructions with photos.
  • We give a 100% Satisfaction Guarantee. Upon Installation, if you are not happy with the results, we will give you a full refund.
  • See more on Amazon...

Brand: 6 Sigma   |   Manufacturer: 6 Sigma

Amazon Price: $39.50 | as of 06/25/2019(3:16pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $39.50

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

Can Am Maverick Commander Defender Fuel Injection Programmer EJK 8320062

 PartNumber: 8320062   |   Asin: B00XIGSOSI

The Electronic Jet Kit (EJK) is the most popular fuel solution from Dobeck Performance. It is the #1 EFI controller on the market for installation time to riding with great performance. The EJK is a plug and play fuel solution that comes preprogrammed for Stage 1 modifications (Intake & Exhaust upgrades). Forget downloading maps. Forget looking up settings. Forget additional tools. Install the EJK and go ride; you will have a great tune up right out of the box. The EJK offers simple on-the-fly adjustability and access to 6 modes of adjustment using three push buttons. The EJK implements DP's load based technology which takes into account changing loads for various riding conditions. Load based tuning technology provides a smooth dynamic tune up that breaks the drive cycle into 3 main adjustment zones instead of filling in an entire TPS vs RPM fuel grid. The EJK is water resistant, and comes with a 2 year warranty. No dyno time required; no computer needed. EFI made easy. This EJK Gen 3.5 fits 2013-2016 Can Am Maverick, 2014-2016 Can Am Commander 800 and 1000 and 2016-2017 Can Am Defender HD8 and HD10.

Features

  • EASY INSTALLATION: Plug N' Play Installation- takes minutes to install
  • PRACTICAL: Uses unique Load Based Technology
  • COMPATIBLE: Does not interfere with stock ECU operation
  • DURABLE: Water-resistant
  • WARRANTY: 2-year warranty
  • See more on Amazon...

Brand: Dobeck Performance   |   Manufacturer: Dobeck Performance

Package Dimensions: 1.34 x 5.08 x 7.2 inches (3.4 x 12.9 x 18.3 cm)

Amazon Price: $225.00 | as of 06/25/2019(3:16pm pst)
Availibility: Usually ships in 24 hours
List Price: $225.00

Warranty: The EJK controllers come with a two (2) year warranty from date of purchase against original defects in materials and workmanship. Should the controller fail to perform then the manufacturer will repair or replace the unit to the original retail purchaser at no charge except for shipping charges back to the manufacturer. Proof of purchase may be required. NOTE: DO NOT cut any wires or apply dielectric grease to the terminals inside any connectors. Doing so will automatically void the warranty on your EJK controller.

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

Dynojet Q521 Jet Kit for Polaris Phoenix 200 05-06

Model: Q521   |    Mpn: Q521   |    Ean: 0182682187016   |    PartNumber: Q521   |   Asin: B0043M69F6

Dynojet carburetor jet kit can provide you with a simple and affordable solution to all your carburetion problems. Dynojet kits increase power and smoothness throughout the entire rev range, while maintaining optimum fuel economy. Dynojet stage 1 kits are fully adjustable to allow the use of a well designed aftermarket pipes and stock replacement air filters, stage 1 kits are designed to improve throttle response and driveability and in most cases power increases of approximately 5 percent throughout the entire power range can be achieved. Dynojet stage 2 kits are designed for applications where individual filters cannot be installed and for applications where airbox modification improves the engine's performance, in most cases power increases of approximately 8 percent can be achieved. Each Dynojet jet kit includes comprehensive instructions which show step-by-step installation and testing procedures to ensure a perfect setup every time. This is backed by free telephone and Internet support to Dynojet customers.

Features

  • Fits 05-06 Polaris Phoenix 200
  • Stage 1
  • Stage 1 kit are intended for motorcycles with a stock engine using the stock airbox, air filter and stock pipe
  • See more on Amazon...

Brand: Dynojet   |   Manufacturer: Dynojet

Item Dimensions: 1.7 x 6 x 7.5 inches (4.3 x 15.2 x 19.1 cm)   |   Package Dimensions: 1.6 x 6 x 7.2 inches (4.1 x 15.2 x 18.3 cm)

Amazon Price: $51.57 | as of 06/25/2019(3:16pm pst)
Availibility: Usually ships in 24 hours
List Price: $51.57

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

BMW Genuine Fuel Pump Electronic Control Unit for F800S F800ST F650GS F800GS F800R

 Ean: 0700115457989   |    PartNumber: BMW7720778   |   Asin: B00EWPW3KO

K71-F Bike-F800S-(-) K71-F Bike-F800ST-(-) K72-F Bike-F650GS-(2009-12) K72-F Bike-F800GS-(2008-12) K73-F Bike-F800R-(-)

Features

  • BMW Genuine FUEL PUMP Fuel pump electronic
  • It is under diagram FUEL PUMP
  • BMW Manufacturer Warranty: 24 months / 24000 miles
  • See more on Amazon...

Brand: BMW   |   Manufacturer: BMW

Amazon Price: $184.29 | as of 06/25/2019(3:16pm pst)
Availibility: Usually ships in 2-3 business days
List Price: $184.29

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

Can Am Commander 800 1000 Fuel Injection Programmer 2011-2013 EJK 8320018

 PartNumber: 8320018   |   Asin: B00XIGSC1C

The Electronic Jet Kit (EJK) is the most popular fuel solution from Dobeck Performance. It is the #1 EFI controller on the market for installation time to riding with great performance. The EJK is a plug and play fuel solution that comes preprogrammed for Stage 1 modifications (Intake & Exhaust upgrades). Forget downloading maps. Forget looking up settings. Forget additional tools. Install the EJK and go ride; you will have a great tune up right out of the box. The EJK offers simple on-the-fly adjustability and access to 6 modes of adjustment using three push buttons. The EJK implements DP's load based technology which takes into account changing loads for various riding conditions. Load based tuning technology provides a smooth dynamic tune up that breaks the drive cycle into 3 main adjustment zones instead of filling in an entire TPS vs RPM fuel grid. The EJK is water resistant, and comes with a 2 year warranty. No dyno time required; no computer needed. EFI made easy. This EJK Gen 3 fits the 2010-2013 Can Am Commander 800/1000.

Features

  • EASY INSTALLATION: Plug N' Play Installation- takes minutes to install
  • PRACTICAL: Uses unique Load Based Technology
  • COMPATIBLE: Does not interfere with stock ECU operation
  • DURABLE: Water-resistant
  • WARRANTY: 2-year warranty
  • See more on Amazon...

Brand: Dobeck Performance   |   Manufacturer: Dobeck Performance

Amazon Price: $225.00 | as of 06/25/2019(3:16pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $225.00

Warranty: The EJK controllers come with a two (2) year warranty from date of purchase against original defects in materials and workmanship. Should the controller fail to perform then the manufacturer will repair or replace the unit to the original retail purchaser at no charge except for shipping charges back to the manufacturer. Proof of purchase may be required. NOTE: DO NOT cut any wires or apply dielectric grease to the terminals inside any connectors. Doing so will automatically void the warranty on your EJK controller.

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

Suzuki LTZ400 LTZ 400 440 450 470 522 cc Big Bore Stroker Carb Stage 1-7 Jet Kit

 PartNumber: SI0002168   |   Asin: B00GGXG54K

Installing a jet kit in your carb is the best way to get the maximum performance and longest life out of your bike. The stock carburetor from the factory is designed to meet Import Regulations ... not peak performance. Once you install or modify an exhaust or intake, you have put your bike into a leaner condition that will eventually destroy your engine due to heat from running lean. If you notice any popping, you are extremely lean. Our jet kit provides the parts and installation instructions to enrich all the circuits in the carb, to fix this problem, and add performance you can feel in the seat. This is a comprehensive jet kit, addressing all throttle positions, throttle response, and each kit is custom made to your bike and its modifications. Replacing just the jets does not address 1/4-3/4 throttle position, or throttle response, only full throttle. 1 KIT IS FOR THE ENTIRE BIKE, ALL CARBS ON THE BIKE. Benefits: More Peak Horse Power - (Designed to gain 6%-8% in HP with intake/exhaust, 2-3% on bone stock.) Longer Engine Life- (The jet kit is a performance upgrade that allows the engine to run cooler which increases engine component life.) Increased Performance- (Designed to improve all RPM ranges of performance and throttle response.) Lower EGT's (exhaust gas temperatures) If you have installed an aftermarket, or modified the stock exhaust or intake, this is needed or you will damage your engine. Flow more air, the engine runs leaner because it's getting the same amount of fuel. Running lean causes detonation and hotter EGT's which ruin exhaust valves and destroy engines. Kit Includes: Main Jets, Needle Adjusters, Nylon Spacers, Drill Bits for: Slide Hole Mod, Slide Spring Mod, Idle Mixture Mod, Bike Specs, Carb Schematic, Carb Synchronizer Tool (how to build for $5), Step by step instructions customized to your bike.

Features

  • Increased Performance at all RPM's, Faster Throttle Response, & Stops Lean Exhaust Popping that Damages Engines.
  • Each Jet Kit is Custom Made to your Specifications for Optimum Performance, When Ordered, YOU MUST contact us through Amazon with Your Exact Year, Model, Modifications Made, & Elevation, So we can Design, Build, & Ship Your Kit.
  • The kit comes with complete instructions for installation. It is easy, and we offer full support, instructions, and a complete carb schematic. Only basic hand tools are required.
  • Kit Includes: Main Jets, Pilot Jet, Needle Adjusters, Nylon Spacers, Drill Bits, Slide Hole mod (with CV carb), Idle Mixture mod, Slide Spring Mod (with CV carb), Carb Schematic, Specifications, Carb Sync Tool build, Carb Cleaning Procedure, Proper Tuning Techniques, and step by step instructions with photos.
  • We give a 100% Satisfaction Guarantee. Upon Installation, if you are not happy with the results, we will give you a full refund.
  • See more on Amazon...

Brand: 6 Sigma   |   Manufacturer: 6 Sigma

Amazon Price: $39.50 | as of 06/25/2019(3:16pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $39.50

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #20

R & D Racing Products RD POWER BOWL 2 Power Bowl 2

Model: LEPAZA7610   |    Mpn: RDPOWERBOWL2   |    Ean: 0182682948945   |    PartNumber: RDPOWERBOWL2   |   Asin: B005UGG030

Eliminates hesitation and bogging.
Better holeshots.
Provides instant response to throttle movements.
Starts easier.
Reduces hot engine stalling.
Improves low end performance.
Bolt-on product that requires no modification.
New 2nd generation products use left hand adjusters.

Features

  • Eliminates hesitation and bogging
  • Better holeshots
  • Provides instant response to throttle movements
  • Starts easier
  • Reduces hot engine stalling
  • See more on Amazon...

Brand: RD Racing Products   |   Manufacturer: R & D Racing Products

Item Dimensions: 3.5 x 5.8 x 4.4 inches (8.9 x 14.7 x 11.2 cm)   |   Package Dimensions: 3.5 x 4.5 x 5.78 inches (8.9 x 11.4 x 14.7 cm)

Amazon Price: $146.97 | as of 06/25/2019(3:16pm pst)
Availibility: Usually ships in 24 hours
List Price: $147.12

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #21

Lexx EFI Fuel Controller - YAMAHA YFZ450R YFZ450X 2009 2011 - Includes Oil Filter

 PartNumber: 123127-5578332   |   Asin: B07RXB17RZ

EFI controller optimizes proper air/fuel mixture. Utilizes OE style connectors for simple plug-n-play installation. Set from the factory with proven settings, but can be easily user-customized to match your specific modifications. Simple push-button tuning. No need for a computer or complicated downloads. Plenty of adjustment so it will work with stock machines, as well as modified machines. Up to six different tuning areas that you can target for customer settings. Will work with any brand of exhaust. Does not alter OE components so it is safe and completely reversible.

Features

  • NOT FOR SALE IN CALIFORNIA (See Disclaimer).
  • YAMAHA YFZ450R YFZ450X 2009-2011.
  • Includes free oil filter.
  • See more on Amazon...

Brand: Lexx   |   Manufacturer: Lexx

Amazon Price: $159.99 | as of 06/25/2019(3:16pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $159.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #22

Honda CRF250L Rally 2017 Fuel Injection Programmer EJK 9110044

 PartNumber: 9110044   |   Asin: B07345S4DQ

The Electronic Jet Kit (EJK) is the most popular fuel solution from Dobeck Performance. It is the #1 EFI controller on the market for installation time to riding with great performance. The EJK is a plug and play fuel solution that comes preprogrammed for Stage 1 modifications (Intake & Exhaust upgrades). Forget downloading maps. Forget looking up settings. Forget additional tools. Install the EJK and go ride; you will have a great tune up right out of the box. The EJK offers simple on-the-fly adjustability and access to 6 modes of adjustment using three push buttons. The EJK implements DP's load based technology which takes into account changing loads for various riding conditions. Load based tuning technology provides a smooth dynamic tune up that breaks the drive cycle into 3 main adjustment zones instead of filling in an entire TPS vs RPM fuel grid. The EJK is water resistant, and comes with a 2 year warranty. No dyno time required; no computer needed. EFI made easy. This EJK Gen 3 fits the 2017 Honda CRF 250L and Rally.

Features

  • Plug N' Play Installation- takes minutes to install
  • Uses unique Load Based Technology
  • Does not interfere with stock ECU operation
  • Water-resistant
  • 2-year warranty
  • See more on Amazon...

Brand: Dobeck Performance   |   Manufacturer: Dobeck Performance

Package Dimensions: 1.3 x 4.9 x 7.4 inches (3.3 x 12.4 x 18.8 cm)

Amazon Price: $225.00 | as of 06/25/2019(3:16pm pst)
Availibility: Usually ships in 24 hours
List Price: $225.00

Warranty: The controllers come with a two (2) year warranty from date of purchase against original defects in materials and workmanship. Should the controller fail to perform then the manufacturer will repair or replace the unit to the original retail purchaser at no charge except for shipping charges back to the manufacturer. Proof of purchase may be required.

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #23

Carburetor Main Jet Nozzle Kit for Keihin OKO KOSO PE PWK with Available Size #118, 120, 122, 145, 148, 150, 152, 155, 158, 160, Pack of 10 by Vautoparts

 Ean: 0664248568915   |    PartNumber: 180807-3   |   Asin: B07G7K2FWW

Function: This main Jet is the direct replacement for Keihin OKO KOSO PE PWK Carburetor


Size: 118, 120, 122, 145, 148, 150, 152, 155, 158, 160.


Packing: Package includes 10pcs , 1 for each size


Note: Please refer to the following compatibility details and check the part number before purchasing to ensure fitment


Satisfaction Guaranteed: We offer a 60-day return and money back service.


Fitment:

FTER MARKET FCR, CRS, PWM

HONDA PD (Dual Purpose)

PE-34-38PE (Motocross)

PJPDVG (Motocross) (ATV)

Kawasaki PWK (Motocross)

HARLEY BD (Screamin Eagle)

YAMAHA BD (Snowmobile)

PWM(Motocross)

Features

  • Function: This main Jet is the direct replacement for Keihin OKO KOSO PE PWK Carburetor
  • Size: 118, 120, 122, 145, 148, 150, 152, 155, 158, 160.Size same as Keihin 99101-357 Main Jet
  • Package: 10pcs in total, 1pcs for each size.
  • Note: Please refer to the following compatibility details and check the part number before purchasing to ensure fitment
  • Satisfaction Guaranteed: We offer a 60-day return and money back service.
  • See more on Amazon...

Brand: Vautoparts   |   Manufacturer: Vautoparts

Package Dimensions: 0.2 x 3 x 5.6 inches (0.5 x 7.6 x 14.2 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #24

Dynojet 16-011 Power Commander V Fuel Injection Module (PCV) Honda VT750 Models 2009-2017

Model: 16-011   |    Mpn: 16-011   |    PartNumber: 16-011   |   Asin: B003D0CQRY

The PCV Uses RPM and Throttle Position Inputs to Base Fuel Adjustments On. In Some Cases, Additional Inputs Can Be Used Such as Cylinder Head or Water Temperature as Well as Gear Position or Boost. The PCV Has 250 Rpm Resolution and 10 Throttle Position Columns Giving You Up to 360 Individual Mapping Points for Fuel and an Equal Number for Ignition Timing (If Ignition Equipped). This Is the Kind of "Point Specific" Adjustability That Is Necessary With Today's Bikes and the Parts That Are Available for Them.
Reduced Size - Less Than Half the Size of PCIII USB Powered From Computer - 9 Volt Adapter Is No Longer Needed for Programming Two Position Map Switching Function Built in (Map Switch Not Included) Gear Position - Allows for Map Adjustment Based on Gear Ten Throttle Position Columns - Up From Nine on PCIII Built in Quick Shifter Adjustability - Adjustable Per Gear (Sensor and Shift Rods Not Included) Enhanced Accel Pump Adjustment - Unit Reads Engine Temp and Allows Fuel Adjustments Based on It Individual Cylinder Mapping Analog Input - Allows Use to Use Any 0-5 Volt Sensor and Build an Adjustment Table on Its Input Such as Boost
Please Note: The Image Displayed Is Representative of the Item, but May Vary Depending on Your Specific Model.

Features

Brand: Dynojet   |   Manufacturer: Dynojet

Item Dimensions: 6 x 6 x 6 inches (15.2 x 15.2 x 15.2 cm)   |   Package Dimensions: 3.31 x 8.82 x 8.9 inches (8.4 x 22.4 x 22.6 cm)

First Available: 2016-01-11

Amazon Price: $346.77 | as of 06/25/2019(3:16pm pst)
Availibility: Usually ships in 3-4 business days
List Price: $346.77

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #25

Dynojet Q107 Jet Kit for TRX400EX 92-08

Model: Q107   |    Mpn: Q107   |    Ean: 0182682207097   |    PartNumber: Q107   |   Asin: B0043M6BMW

Dynojet carburetor jet kit can provide you with a simple and affordable solution to all your carburetion problems. Dynojet kits increase power and smoothness throughout the entire rev range, while maintaining optimum fuel economy. Dynojet stage 1 kits are fully adjustable to allow the use of a well designed aftermarket pipes and stock replacement air filters, stage 1 kits are designed to improve throttle response and driveability and in most cases power increases of approximately 5 percent throughout the entire power range can be achieved. Dynojet stage 2 kits are designed for applications where individual filters cannot be installed and for applications where airbox modification improves the engine's performance, in most cases power increases of approximately 8 percent can be achieved. Each Dynojet jet kit includes comprehensive instructions which show step-by-step installation and testing procedures to ensure a perfect setup every time. This is backed by free telephone and Internet support to Dynojet customers.

Features

  • Fits 99-08 TRX400EX
  • Stage 1 and 2
  • Stage 1 kit are intended for motorcycles with a stock engine using the stock airbox, air filter and stock pipe
  • Stage 2 kit are Intended for motorcycles with a stock or mildly tuned engine using a well designed aftermarket pipe with a modified airbox and a stock replacement air filter
  • Stage 2 kit are designed for applications where individual filters cannot be installed and for applications where airbox modification improves the engine's performance, in most cases power increases of approximately 8 percent can be achieved
  • See more on Amazon...

Brand: Dynojet   |   Manufacturer: Dynojet

Item Dimensions: 1.6 x 1.6 x 7.2 inches (4.1 x 4.1 x 18.3 cm)   |   Package Dimensions: 1.1 x 5.6 x 7.1 inches (2.8 x 14.2 x 18.0 cm)

Amazon Price: $46.83 | as of 06/25/2019(3:16pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $46.83

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #26

PPE Xcelerator GM 2001-2010 Standard Up to 225HP - 111020000

Model: 111020000   |    Mpn: 111020000   |    PartNumber: 111020000   |   Asin: B00769RX4Y

The Standard Xcelerator series tuner was specifically designed to provide better throttle response, shifting characteristics, and add big power without the need for expensive fueling and air upgrades. It provides up to five power tuning levels of additional horsepower and torque (40 to 225 hp). The best part about the PPE Standard Xcelerator is that it will optimize a stock engine's performance; and works especially well for those which have added items such as PPE's Manifolds and Up-Pipes, a PPE Down Pipe and/or PPE OEM Up-Pipes. Another advantage of the PPE Standard Xcelerator is that if you eventually want the benefits of our Hot+2 E.T. Xcelerator Race models, it is possible to simply upgrade the software.

Features

  • Up to five power levels of additional horsepower and torque (depending on vehicle year)
  • Adjustable speed limiter (from 40 to 96 mph in 1 mph increments or directly to 200 mph)
  • Read and clear DTCs
  • Applications *: 6.6L GM Duramax Diesel 2001-2010 LB7/LLY/LBZ/LMM (111020000)
  • Note: LEGAL IN CALIFORNIA ONLY FOR RACING VEHICLES THAT MAY NEVER BE USED, OR REGISTERED OR LICENSED FOR HIGHWAY OR OFF-ROAD USE.
  • See more on Amazon...

Brand: PPE   |   Manufacturer: PPE

Item Dimensions: 3.5 x 9.5 x 11 inches (8.9 x 24.1 x 27.9 cm)   |   Package Dimensions: 10 x 12 x 15 inches (25.4 x 30.5 x 38.1 cm)

Amazon Price: $449.99 | as of 06/25/2019(3:16pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $471.82

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #27

Dynojet Q425 Jet Kit for YXR660 Rhino 04-07

Model: Q425   |    Mpn: Q425   |    Ean: 0182682187535   |    PartNumber: Q425   |   Asin: B0043M68WA

Dynojet carburetor jet kit can provide you with a simple and affordable solution to all your carburetion problems. Dynojet kits increase power and smoothness throughout the entire rev range, while maintaining optimum fuel economy. Dynojet stage 1 kits are fully adjustable to allow the use of a well designed aftermarket pipes and stock replacement air filters, stage 1 kits are designed to improve throttle response and driveability and in most cases power increases of approximately 5 percent throughout the entire power range can be achieved. Dynojet stage 2 kits are designed for applications where individual filters cannot be installed and for applications where airbox modification improves the engine's performance, in most cases power increases of approximately 8 percent can be achieved. Each Dynojet jet kit includes comprehensive instructions which show step-by-step installation and testing procedures to ensure a perfect setup every time. This is backed by free telephone and Internet support to Dynojet customers.

Features

  • Fits 04-07 YXR660 Rhino
  • Stage 1
  • Stage 1 kit are intended for motorcycles with a stock engine using the stock airbox, air filter and stock pipe
  • See more on Amazon...

Brand: Dynojet   |   Manufacturer: Dynojet

Item Dimensions: 1.7 x 1.7 x 7.1 inches (4.3 x 4.3 x 18.0 cm)   |   Package Dimensions: 1.4 x 6.1 x 7 inches (3.6 x 15.5 x 17.8 cm)

Amazon Price: $63.64 | as of 06/25/2019(3:16pm pst)
Availibility: Usually ships in 24 hours
List Price: $63.65

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #28

6 Sigma Carb Jet Kit fits 1999-07 Honda VT600 -VLX 600 Shadow Custom Performance Stage 1-3 Carburetor Jetting

 Ean: 0689338036648   |    PartNumber: 6SIG11327   |   Asin: B07RQ9TCLY

Installing a jet kit in your carb is the best way to get the maximum performance and longest life out of your bike. The stock carburetor from the factory is designed to meet Import Regulations ... not peak performance. Once you install or modify an exhaust or intake, you have put your bike into a leaner condition that will eventually destroy your engine due to heat from running lean. If you notice any popping, you are extremely lean. Our jet kit provides the parts and installation instructions to enrich all the circuits in the carb, to fix this problem, and add performance you can feel in the seat. This is a comprehensive jet kit, addressing all throttle positions, throttle response, and each kit is custom made to your bike and its modifications. Replacing just the jets does not address 1/4-3/4 throttle position, or throttle response, only full throttle. 1 KIT IS FOR THE ENTIRE BIKE, ALL CARBS ON THE BIKE. Benefits: More Peak Horse Power - (Designed to gain 6%-8% in HP with intake/exhaust, 2-3% on bone stock.) Longer Engine Life- (The jet kit is a performance upgrade that allows the engine to run cooler which increases engine component life.) Increased Performance- (Designed to improve all RPM ranges of performance and throttle response.) Lower EGT's (exhaust gas temperatures) If you have installed an aftermarket, or modified the stock exhaust or intake, this is needed or you will damage your engine. Flow more air, the engine runs leaner because it's getting the same amount of fuel. Running lean causes detonation and hotter EGT's which ruin exhaust valves and destroy engines. Kit Includes: Main Jets, Needle Adjusters, Nylon Spacers, Drill Bits for: Slide Hole Mod, Slide Spring Mod, Idle Mixture Mod, Bike Specs, Carb Schematic, Carb Synchronizer Tool (how to build for $5), Step by step instructions customized to your bike.

Features

  • Increased Performance at all RPM's, Faster Throttle Response, & Stops Lean Exhaust Popping that Damages Engines.
  • Each Jet Kit is Custom Made to your Specifications for Optimum Performance, When You Order, Please Email us at 6SigmaJetKits@gmail.com , with Your Exact Year, Model, Modifications Made, & Elevation, So we can Design, Build, & Ship Your Kit.
  • The kit comes with complete instructions for installation. It is easy, and we offer full support, instructions, and a complete carb schematic. Only basic hand tools are required.
  • Kit Includes: Main Jets, Needle Adjusters, Nylon Spacers, Drill Bits, Slide Hole mod (with CV carb), Idle Mixture mod, Slide Spring Mod (with CV carb), Carb Schematic, Specifications, Carb Sync Tool build, Carb Cleaning Procedure, Proper Tuning Techniques, and step by step instructions with photos.
  • We give a 100% Satisfaction Guarantee. Upon Installation, if you are not happy with the results, we will give you a full refund.
  • See more on Amazon...

Brand: 6 Sigma   |   Manufacturer: 6 Sigma

Amazon Price: $39.95 | as of 06/25/2019(3:16pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $39.95

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #29

6 Sigma Carb Jet Kit fits Honda CR80 CR85 90 101 101.5 102 105 cc Big Bore Stroker Custom Performance Stage 1-3 Carburetor Jetting

 Ean: 0689338039205   |    PartNumber: 6SIG11583   |   Asin: B07RSD5FPM

Installing a jet kit in your carb is the best way to get the maximum performance and longest life out of your bike. The stock carburetor from the factory is designed to meet Import Regulations ... not peak performance. Once you install or modify an exhaust or intake, you have put your bike into a leaner condition that will eventually destroy your engine due to heat from running lean. If you notice any popping, you are extremely lean. Our jet kit provides the parts and installation instructions to enrich all the circuits in the carb, to fix this problem, and add performance you can feel in the seat. This is a comprehensive jet kit, addressing all throttle positions, throttle response, and each kit is custom made to your bike and its modifications. Replacing just the jets does not address 1/4-3/4 throttle position, or throttle response, only full throttle. 1 KIT IS FOR THE ENTIRE BIKE, ALL CARBS ON THE BIKE. Benefits: More Peak Horse Power - (Designed to gain 6%-8% in HP with intake/exhaust, 2-3% on bone stock.) Longer Engine Life- (The jet kit is a performance upgrade that allows the engine to run cooler which increases engine component life.) Increased Performance- (Designed to improve all RPM ranges of performance and throttle response.) Lower EGT's (exhaust gas temperatures) If you have installed an aftermarket, or modified the stock exhaust or intake, this is needed or you will damage your engine. Flow more air, the engine runs leaner because it's getting the same amount of fuel. Running lean causes detonation and hotter EGT's which ruin exhaust valves and destroy engines. Kit Includes: Main Jets, Needle Adjusters, Nylon Spacers, Drill Bits for: Slide Hole Mod, Slide Spring Mod, Idle Mixture Mod, Bike Specs, Carb Schematic, Carb Synchronizer Tool (how to build for $5), Step by step instructions customized to your bike.

Features

  • Increased Performance at all RPM's, Faster Throttle Response, & Stops Lean Exhaust Popping that Damages Engines.
  • Each Jet Kit is Custom Made to your Specifications for Optimum Performance, When You Order, Please Email us at 6SigmaJetKits@gmail.com , with Your Exact Year, Model, Modifications Made, & Elevation, So we can Design, Build, & Ship Your Kit.
  • The kit comes with complete instructions for installation. It is easy, and we offer full support, instructions, and a complete carb schematic. Only basic hand tools are required.
  • Kit Includes: Main Jets, Needle Adjusters, Nylon Spacers, Drill Bits, Slide Hole mod (with CV carb), Idle Mixture mod, Slide Spring Mod (with CV carb), Carb Schematic, Specifications, Carb Sync Tool build, Carb Cleaning Procedure, Proper Tuning Techniques, and step by step instructions with photos.
  • We give a 100% Satisfaction Guarantee. Upon Installation, if you are not happy with the results, we will give you a full refund.
  • See more on Amazon...

Brand: 6 Sigma   |   Manufacturer: 6 Sigma

Amazon Price: $49.50 | as of 06/25/2019(3:16pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $49.50

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #30

6 Sigma Carb Jet Kit fits Honda CRF100R CRF100 CRF 100 R Custom Performance Stage 1-3 Carburetor Jetting

 Ean: 0689338039250   |    PartNumber: 6SIG11588   |   Asin: B07RRDXCDS

Installing a jet kit in your carb is the best way to get the maximum performance and longest life out of your bike. The stock carburetor from the factory is designed to meet Import Regulations ... not peak performance. Once you install or modify an exhaust or intake, you have put your bike into a leaner condition that will eventually destroy your engine due to heat from running lean. If you notice any popping, you are extremely lean. Our jet kit provides the parts and installation instructions to enrich all the circuits in the carb, to fix this problem, and add performance you can feel in the seat. This is a comprehensive jet kit, addressing all throttle positions, throttle response, and each kit is custom made to your bike and its modifications. Replacing just the jets does not address 1/4-3/4 throttle position, or throttle response, only full throttle. 1 KIT IS FOR THE ENTIRE BIKE, ALL CARBS ON THE BIKE. Benefits: More Peak Horse Power - (Designed to gain 6%-8% in HP with intake/exhaust, 2-3% on bone stock.) Longer Engine Life- (The jet kit is a performance upgrade that allows the engine to run cooler which increases engine component life.) Increased Performance- (Designed to improve all RPM ranges of performance and throttle response.) Lower EGT's (exhaust gas temperatures) If you have installed an aftermarket, or modified the stock exhaust or intake, this is needed or you will damage your engine. Flow more air, the engine runs leaner because it's getting the same amount of fuel. Running lean causes detonation and hotter EGT's which ruin exhaust valves and destroy engines. Kit Includes: Main Jets, Needle Adjusters, Nylon Spacers, Drill Bits for: Slide Hole Mod, Slide Spring Mod, Idle Mixture Mod, Bike Specs, Carb Schematic, Carb Synchronizer Tool (how to build for $5), Step by step instructions customized to your bike.

Features

  • Increased Performance at all RPM's, Faster Throttle Response, & Stops Lean Exhaust Popping that Damages Engines.
  • Each Jet Kit is Custom Made to your Specifications for Optimum Performance, When You Order, Please Email us at 6SigmaJetKits@gmail.com , with Your Exact Year, Model, Modifications Made, & Elevation, So we can Design, Build, & Ship Your Kit.
  • The kit comes with complete instructions for installation. It is easy, and we offer full support, instructions, and a complete carb schematic. Only basic hand tools are required.
  • Kit Includes: Main Jets, Needle Adjusters, Nylon Spacers, Drill Bits, Slide Hole mod (with CV carb), Idle Mixture mod, Slide Spring Mod (with CV carb), Carb Schematic, Specifications, Carb Sync Tool build, Carb Cleaning Procedure, Proper Tuning Techniques, and step by step instructions with photos.
  • We give a 100% Satisfaction Guarantee. Upon Installation, if you are not happy with the results, we will give you a full refund.
  • See more on Amazon...

Brand: 6 Sigma   |   Manufacturer: 6 Sigma

Amazon Price: $39.50 | as of 06/25/2019(3:16pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $39.50

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #31

6 Sigma Carb Jet Kit fits 2004-09 Honda 750 Shadow Aero VT750 C CA Custom Performance Stage 1-3 Carburetor Jetting

 Ean: 0689338035825   |    PartNumber: 6SIG11245   |   Asin: B07RN9MWF8

Installing a jet kit in your carb is the best way to get the maximum performance and longest life out of your bike. The stock carburetor from the factory is designed to meet Import Regulations ... not peak performance. Once you install or modify an exhaust or intake, you have put your bike into a leaner condition that will eventually destroy your engine due to heat from running lean. If you notice any popping, you are extremely lean. Our jet kit provides the parts and installation instructions to enrich all the circuits in the carb, to fix this problem, and add performance you can feel in the seat. This is a comprehensive jet kit, addressing all throttle positions, throttle response, and each kit is custom made to your bike and its modifications. Replacing just the jets does not address 1/4-3/4 throttle position, or throttle response, only full throttle. 1 KIT IS FOR THE ENTIRE BIKE, ALL CARBS ON THE BIKE. Benefits: More Peak Horse Power - (Designed to gain 6%-8% in HP with intake/exhaust, 2-3% on bone stock.) Longer Engine Life- (The jet kit is a performance upgrade that allows the engine to run cooler which increases engine component life.) Increased Performance- (Designed to improve all RPM ranges of performance and throttle response.) Lower EGT's (exhaust gas temperatures) If you have installed an aftermarket, or modified the stock exhaust or intake, this is needed or you will damage your engine. Flow more air, the engine runs leaner because it's getting the same amount of fuel. Running lean causes detonation and hotter EGT's which ruin exhaust valves and destroy engines. Kit Includes: Main Jets, Needle Adjusters, Nylon Spacers, Drill Bits for: Slide Hole Mod, Slide Spring Mod, Idle Mixture Mod, Bike Specs, Carb Schematic, Carb Synchronizer Tool (how to build for $5), Step by step instructions customized to your bike.

Features

  • Increased Performance at all RPM's, Faster Throttle Response, & Stops Lean Exhaust Popping that Damages Engines.
  • Each Jet Kit is Custom Made to your Specifications for Optimum Performance, When You Order, Please Email us at 6SigmaJetKits@gmail.com , with Your Exact Year, Model, Modifications Made, & Elevation, So we can Design, Build, & Ship Your Kit.
  • The kit comes with complete instructions for installation. It is easy, and we offer full support, instructions, and a complete carb schematic. Only basic hand tools are required.
  • Kit Includes: Main Jets, Needle Adjusters, Nylon Spacers, Drill Bits, Slide Hole mod (with CV carb), Idle Mixture mod, Slide Spring Mod (with CV carb), Carb Schematic, Specifications, Carb Sync Tool build, Carb Cleaning Procedure, Proper Tuning Techniques, and step by step instructions with photos.
  • We give a 100% Satisfaction Guarantee. Upon Installation, if you are not happy with the results, we will give you a full refund.
  • See more on Amazon...

Brand: 6 Sigma   |   Manufacturer: 6 Sigma

Amazon Price: $39.95 | as of 06/25/2019(3:16pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $39.95

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #32

6 Sigma Carb Jet Kit fits 1978-82 Honda CX500 CX 500 Performance Jetting Custom Performance Stage 1-3 Carburetor Jetting

 Ean: 0689338037157   |    PartNumber: 6SIG11378   |   Asin: B07RSD279G

Installing a jet kit in your carb is the best way to get the maximum performance and longest life out of your bike. The stock carburetor from the factory is designed to meet Import Regulations ... not peak performance. Once you install or modify an exhaust or intake, you have put your bike into a leaner condition that will eventually destroy your engine due to heat from running lean. If you notice any popping, you are extremely lean. Our jet kit provides the parts and installation instructions to enrich all the circuits in the carb, to fix this problem, and add performance you can feel in the seat. This is a comprehensive jet kit, addressing all throttle positions, throttle response, and each kit is custom made to your bike and its modifications. Replacing just the jets does not address 1/4-3/4 throttle position, or throttle response, only full throttle. 1 KIT IS FOR THE ENTIRE BIKE, ALL CARBS ON THE BIKE. Benefits: More Peak Horse Power - (Designed to gain 6%-8% in HP with intake/exhaust, 2-3% on bone stock.) Longer Engine Life- (The jet kit is a performance upgrade that allows the engine to run cooler which increases engine component life.) Increased Performance- (Designed to improve all RPM ranges of performance and throttle response.) Lower EGT's (exhaust gas temperatures) If you have installed an aftermarket, or modified the stock exhaust or intake, this is needed or you will damage your engine. Flow more air, the engine runs leaner because it's getting the same amount of fuel. Running lean causes detonation and hotter EGT's which ruin exhaust valves and destroy engines. Kit Includes: Main Jets, Needle Adjusters, Nylon Spacers, Drill Bits for: Slide Hole Mod, Slide Spring Mod, Idle Mixture Mod, Bike Specs, Carb Schematic, Carb Synchronizer Tool (how to build for $5), Step by step instructions customized to your bike.

Features

  • Increased Performance at all RPM's, Faster Throttle Response, & Stops Lean Exhaust Popping that Damages Engines.
  • Each Jet Kit is Custom Made to your Specifications for Optimum Performance, When You Order, Please Email us at 6SigmaJetKits@gmail.com , with Your Exact Year, Model, Modifications Made, & Elevation, So we can Design, Build, & Ship Your Kit.
  • The kit comes with complete instructions for installation. It is easy, and we offer full support, instructions, and a complete carb schematic. Only basic hand tools are required.
  • Kit Includes: Main Jets, Needle Adjusters, Nylon Spacers, Drill Bits, Slide Hole mod (with CV carb), Idle Mixture mod, Slide Spring Mod (with CV carb), Carb Schematic, Specifications, Carb Sync Tool build, Carb Cleaning Procedure, Proper Tuning Techniques, and step by step instructions with photos.
  • We give a 100% Satisfaction Guarantee. Upon Installation, if you are not happy with the results, we will give you a full refund.
  • See more on Amazon...

Brand: 6 Sigma   |   Manufacturer: 6 Sigma

Amazon Price: $49.50 | as of 06/25/2019(3:16pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $49.50

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #33

6 Sigma Carb Jet Kit fits Honda TRX250EX TRX250 TRX 250 250EX Custom Performance Stage 1-3 Carburetor Jetting

 Ean: 0689338040706   |    PartNumber: 6SIG11733   |   Asin: B07RQ9VNB5

Installing a jet kit in your carb is the best way to get the maximum performance and longest life out of your bike. The stock carburetor from the factory is designed to meet Import Regulations ... not peak performance. Once you install or modify an exhaust or intake, you have put your bike into a leaner condition that will eventually destroy your engine due to heat from running lean. If you notice any popping, you are extremely lean. Our jet kit provides the parts and installation instructions to enrich all the circuits in the carb, to fix this problem, and add performance you can feel in the seat. This is a comprehensive jet kit, addressing all throttle positions, throttle response, and each kit is custom made to your bike and its modifications. Replacing just the jets does not address 1/4-3/4 throttle position, or throttle response, only full throttle. 1 KIT IS FOR THE ENTIRE BIKE, ALL CARBS ON THE BIKE. Benefits: More Peak Horse Power - (Designed to gain 6%-8% in HP with intake/exhaust, 2-3% on bone stock.) Longer Engine Life- (The jet kit is a performance upgrade that allows the engine to run cooler which increases engine component life.) Increased Performance- (Designed to improve all RPM ranges of performance and throttle response.) Lower EGT's (exhaust gas temperatures) If you have installed an aftermarket, or modified the stock exhaust or intake, this is needed or you will damage your engine. Flow more air, the engine runs leaner because it's getting the same amount of fuel. Running lean causes detonation and hotter EGT's which ruin exhaust valves and destroy engines. Kit Includes: Main Jets, Needle Adjusters, Nylon Spacers, Drill Bits for: Slide Hole Mod, Slide Spring Mod, Idle Mixture Mod, Bike Specs, Carb Schematic, Carb Synchronizer Tool (how to build for $5), Step by step instructions customized to your bike.

Features

  • Increased Performance at all RPM's, Faster Throttle Response, & Stops Lean Exhaust Popping that Damages Engines.
  • Each Jet Kit is Custom Made to your Specifications for Optimum Performance, When You Order, Please Email us at 6SigmaJetKits@gmail.com , with Your Exact Year, Model, Modifications Made, & Elevation, So we can Design, Build, & Ship Your Kit.
  • The kit comes with complete instructions for installation. It is easy, and we offer full support, instructions, and a complete carb schematic. Only basic hand tools are required.
  • Kit Includes: Main Jets, Needle Adjusters, Nylon Spacers, Drill Bits, Slide Hole mod (with CV carb), Idle Mixture mod, Slide Spring Mod (with CV carb), Carb Schematic, Specifications, Carb Sync Tool build, Carb Cleaning Procedure, Proper Tuning Techniques, and step by step instructions with photos.
  • We give a 100% Satisfaction Guarantee. Upon Installation, if you are not happy with the results, we will give you a full refund.
  • See more on Amazon...

Brand: 6 Sigma   |   Manufacturer: 6 Sigma

Amazon Price: $34.40 | as of 06/25/2019(3:16pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $34.40

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #34

6 Sigma Carb Jet Kit fits 1998-2004 Honda TRX450ES TRX 450 E S Foreman ATV Custom Performance Stage 1-3 Carburetor Jetting

 Ean: 0689338036594   |    PartNumber: 6SIG11322   |   Asin: B07RRF3XCG

Installing a jet kit in your carb is the best way to get the maximum performance and longest life out of your bike. The stock carburetor from the factory is designed to meet Import Regulations ... not peak performance. Once you install or modify an exhaust or intake, you have put your bike into a leaner condition that will eventually destroy your engine due to heat from running lean. If you notice any popping, you are extremely lean. Our jet kit provides the parts and installation instructions to enrich all the circuits in the carb, to fix this problem, and add performance you can feel in the seat. This is a comprehensive jet kit, addressing all throttle positions, throttle response, and each kit is custom made to your bike and its modifications. Replacing just the jets does not address 1/4-3/4 throttle position, or throttle response, only full throttle. 1 KIT IS FOR THE ENTIRE BIKE, ALL CARBS ON THE BIKE. Benefits: More Peak Horse Power - (Designed to gain 6%-8% in HP with intake/exhaust, 2-3% on bone stock.) Longer Engine Life- (The jet kit is a performance upgrade that allows the engine to run cooler which increases engine component life.) Increased Performance- (Designed to improve all RPM ranges of performance and throttle response.) Lower EGT's (exhaust gas temperatures) If you have installed an aftermarket, or modified the stock exhaust or intake, this is needed or you will damage your engine. Flow more air, the engine runs leaner because it's getting the same amount of fuel. Running lean causes detonation and hotter EGT's which ruin exhaust valves and destroy engines. Kit Includes: Main Jets, Needle Adjusters, Nylon Spacers, Drill Bits for: Slide Hole Mod, Slide Spring Mod, Idle Mixture Mod, Bike Specs, Carb Schematic, Carb Synchronizer Tool (how to build for $5), Step by step instructions customized to your bike.

Features

  • Increased Performance at all RPM's, Faster Throttle Response, & Stops Lean Exhaust Popping that Damages Engines.
  • Each Jet Kit is Custom Made to your Specifications for Optimum Performance, When You Order, Please Email us at 6SigmaJetKits@gmail.com , with Your Exact Year, Model, Modifications Made, & Elevation, So we can Design, Build, & Ship Your Kit.
  • The kit comes with complete instructions for installation. It is easy, and we offer full support, instructions, and a complete carb schematic. Only basic hand tools are required.
  • Kit Includes: Main Jets, Needle Adjusters, Nylon Spacers, Drill Bits, Slide Hole mod (with CV carb), Idle Mixture mod, Slide Spring Mod (with CV carb), Carb Schematic, Specifications, Carb Sync Tool build, Carb Cleaning Procedure, Proper Tuning Techniques, and step by step instructions with photos.
  • We give a 100% Satisfaction Guarantee. Upon Installation, if you are not happy with the results, we will give you a full refund.
  • See more on Amazon...

Brand: 6 Sigma   |   Manufacturer: 6 Sigma

Amazon Price: $39.95 | as of 06/25/2019(3:16pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $39.95

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #35

6 Sigma Carb Jet Kit fits Honda VT1100 Shadow Sabre 1100 Custom Performance Stage 1-3 Carburetor Jetting

 Ean: 0689338041154   |    PartNumber: 6SIG11778   |   Asin: B07RPCFDY1

Installing a jet kit in your carb is the best way to get the maximum performance and longest life out of your bike. The stock carburetor from the factory is designed to meet Import Regulations ... not peak performance. Once you install or modify an exhaust or intake, you have put your bike into a leaner condition that will eventually destroy your engine due to heat from running lean. If you notice any popping, you are extremely lean. Our jet kit provides the parts and installation instructions to enrich all the circuits in the carb, to fix this problem, and add performance you can feel in the seat. This is a comprehensive jet kit, addressing all throttle positions, throttle response, and each kit is custom made to your bike and its modifications. Replacing just the jets does not address 1/4-3/4 throttle position, or throttle response, only full throttle. 1 KIT IS FOR THE ENTIRE BIKE, ALL CARBS ON THE BIKE. Benefits: More Peak Horse Power - (Designed to gain 6%-8% in HP with intake/exhaust, 2-3% on bone stock.) Longer Engine Life- (The jet kit is a performance upgrade that allows the engine to run cooler which increases engine component life.) Increased Performance- (Designed to improve all RPM ranges of performance and throttle response.) Lower EGT's (exhaust gas temperatures) If you have installed an aftermarket, or modified the stock exhaust or intake, this is needed or you will damage your engine. Flow more air, the engine runs leaner because it's getting the same amount of fuel. Running lean causes detonation and hotter EGT's which ruin exhaust valves and destroy engines. Kit Includes: Main Jets, Needle Adjusters, Nylon Spacers, Drill Bits for: Slide Hole Mod, Slide Spring Mod, Idle Mixture Mod, Bike Specs, Carb Schematic, Carb Synchronizer Tool (how to build for $5), Step by step instructions customized to your bike.

Features

  • Increased Performance at all RPM's, Faster Throttle Response, & Stops Lean Exhaust Popping that Damages Engines.
  • Each Jet Kit is Custom Made to your Specifications for Optimum Performance, When You Order, Please Email us at 6SigmaJetKits@gmail.com , with Your Exact Year, Model, Modifications Made, & Elevation, So we can Design, Build, & Ship Your Kit.
  • The kit comes with complete instructions for installation. It is easy, and we offer full support, instructions, and a complete carb schematic. Only basic hand tools are required.
  • Kit Includes: Main Jets, Needle Adjusters, Nylon Spacers, Drill Bits, Slide Hole mod (with CV carb), Idle Mixture mod, Slide Spring Mod (with CV carb), Carb Schematic, Specifications, Carb Sync Tool build, Carb Cleaning Procedure, Proper Tuning Techniques, and step by step instructions with photos.
  • We give a 100% Satisfaction Guarantee. Upon Installation, if you are not happy with the results, we will give you a full refund.
  • See more on Amazon...

Brand: 6 Sigma   |   Manufacturer: 6 Sigma

Amazon Price: $49.95 | as of 06/25/2019(3:16pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $49.95

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #36

6 Sigma Carb Jet Kit fits Honda TRX90 TRX 90 EX Fourtrax Custom Performance Stage 1-3 Carburetor Jetting

 Ean: 0689338040898   |    PartNumber: 6SIG11752   |   Asin: B07RSD5L96

Installing a jet kit in your carb is the best way to get the maximum performance and longest life out of your bike. The stock carburetor from the factory is designed to meet Import Regulations ... not peak performance. Once you install or modify an exhaust or intake, you have put your bike into a leaner condition that will eventually destroy your engine due to heat from running lean. If you notice any popping, you are extremely lean. Our jet kit provides the parts and installation instructions to enrich all the circuits in the carb, to fix this problem, and add performance you can feel in the seat. This is a comprehensive jet kit, addressing all throttle positions, throttle response, and each kit is custom made to your bike and its modifications. Replacing just the jets does not address 1/4-3/4 throttle position, or throttle response, only full throttle. 1 KIT IS FOR THE ENTIRE BIKE, ALL CARBS ON THE BIKE. Benefits: More Peak Horse Power - (Designed to gain 6%-8% in HP with intake/exhaust, 2-3% on bone stock.) Longer Engine Life- (The jet kit is a performance upgrade that allows the engine to run cooler which increases engine component life.) Increased Performance- (Designed to improve all RPM ranges of performance and throttle response.) Lower EGT's (exhaust gas temperatures) If you have installed an aftermarket, or modified the stock exhaust or intake, this is needed or you will damage your engine. Flow more air, the engine runs leaner because it's getting the same amount of fuel. Running lean causes detonation and hotter EGT's which ruin exhaust valves and destroy engines. Kit Includes: Main Jets, Needle Adjusters, Nylon Spacers, Drill Bits for: Slide Hole Mod, Slide Spring Mod, Idle Mixture Mod, Bike Specs, Carb Schematic, Carb Synchronizer Tool (how to build for $5), Step by step instructions customized to your bike.

Features

  • Increased Performance at all RPM's, Faster Throttle Response, & Stops Lean Exhaust Popping that Damages Engines.
  • Each Jet Kit is Custom Made to your Specifications for Optimum Performance, When You Order, Please Email us at 6SigmaJetKits@gmail.com , with Your Exact Year, Model, Modifications Made, & Elevation, So we can Design, Build, & Ship Your Kit.
  • The kit comes with complete instructions for installation. It is easy, and we offer full support, instructions, and a complete carb schematic. Only basic hand tools are required.
  • Kit Includes: Main Jets, Needle Adjusters, Nylon Spacers, Drill Bits, Slide Hole mod (with CV carb), Idle Mixture mod, Slide Spring Mod (with CV carb), Carb Schematic, Specifications, Carb Sync Tool build, Carb Cleaning Procedure, Proper Tuning Techniques, and step by step instructions with photos.
  • We give a 100% Satisfaction Guarantee. Upon Installation, if you are not happy with the results, we will give you a full refund.
  • See more on Amazon...

Brand: 6 Sigma   |   Manufacturer: 6 Sigma

Amazon Price: $39.50 | as of 06/25/2019(3:16pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $39.50

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. MAIN & INTERMEDIATE JET ASSORTMENT KIT FOR S&S SUPER E, B CARB CARBURETOR HARLEY
  2. 6 Sigma Carb Jet Kit fits 1999-07 Honda VT600 -VLX 600 Shadow Custom Performance Stage 1-3 Carbureto...
  3. 6 Sigma Carb Jet Kit fits Honda CR80 CR85 90 101 101.5 102 105 cc Big Bore Stroker Custom Performanc...
  4. 6 Sigma Carb Jet Kit fits Honda CRF100R CRF100 CRF 100 R Custom Performance Stage 1-3 Carburetor Jet...
  5. 6 Sigma Carb Jet Kit fits 2004-09 Honda 750 Shadow Aero VT750 C CA Custom Performance Stage 1-3 Carb...
  6. 6 Sigma Carb Jet Kit fits 1978-82 Honda CX500 CX 500 Performance Jetting Custom Performance Stage 1-...
  7. 6 Sigma Carb Jet Kit fits Honda TRX250EX TRX250 TRX 250 250EX Custom Performance Stage 1-3 Carbureto...
  8. 6 Sigma Carb Jet Kit fits 1998-2004 Honda TRX450ES TRX 450 E S Foreman ATV Custom Performance Stage ...
  9. 6 Sigma Carb Jet Kit fits Honda VT1100 Shadow Sabre 1100 Custom Performance Stage 1-3 Carburetor Jet...
  10. 6 Sigma Carb Jet Kit fits Honda TRX90 TRX 90 EX Fourtrax Custom Performance Stage 1-3 Carburetor Jet...

Most Wished For

  1. KIPA 10Pcs Carburetor Main Jet kit & 10Pcs Slow Pilot Jet for PWK Keihin OKO CVK PWM
  2. Dynojet-Harley Power Vision Fl-Blk J1850 PV-1B
  3. Dynojet Power Commander V w/ Ignition Adjustment and O2 Oxygen Optimizer 17-033
  4. Kawasaki KLX140 KLX140L KLX 140L 140 L Custom Carburetor Carb Stage 1-7 Jet Kit
  5. Suzuki Savage LS650 LS 650 S40 6 Sigma Custom Main Pilot Carburetor Carb Stage 1-7 Jet Kit
  6. Can Am Maverick Commander Defender Fuel Injection Programmer EJK 8320062
  7. Dynojet Q521 Jet Kit for Polaris Phoenix 200 05-06
  8. BMW Genuine Fuel Pump Electronic Control Unit for F800S F800ST F650GS F800GS F800R
  9. Can Am Commander 800 1000 Fuel Injection Programmer 2011-2013 EJK 8320018
  10. Suzuki LTZ400 LTZ 400 440 450 470 522 cc Big Bore Stroker Carb Stage 1-7 Jet Kit

Most Gifted

  1. (10pcs Set) Slow/Pilot Jet for PWK OKO CVK 32,35,38,40,42,45,48,50,52,55
  2. R & D Racing Products RD POWER BOWL 2 Power Bowl 2
  3. Lexx EFI Fuel Controller - YAMAHA YFZ450R YFZ450X 2009–2011 - Includes Oil Filter
  4. 02-08 HONDA CRF450R: R&D Flex Jet Fuel Mixture Screw
  5. Honda CRF250L Rally 2017 Fuel Injection Programmer EJK 9110044
  6. Carburetor Main Jet Nozzle Kit for Keihin OKO KOSO PE PWK with Available Size #118, 120, 122, 145, 1...
  7. Dynojet 16-011 Power Commander V Fuel Injection Module (PCV) Honda VT750 Models 2009-2017
  8. Dynojet Q107 Jet Kit for TRX400EX 92-08
  9. PPE Xcelerator GM 2001-2010 Standard Up to 225HP - 111020000
  10. Dynojet Q425 Jet Kit for YXR660 Rhino 04-07

Top Selling

  1. KIPA 10Pcs Carburetor Main Jet kit & 10Pcs Slow Pilot Jet for PWK Keihin OKO CVK PWM
  2. (10pcs Set) Slow/Pilot Jet for PWK OKO CVK 32,35,38,40,42,45,48,50,52,55
  3. 02-08 HONDA CRF450R: R&D Flex Jet Fuel Mixture Screw
  4. EXUP Eliminator for Yamaha
  5. GTSpeed PWK 122/125/128/130/132/135/138/140/142/145 Carburetor Main Jet Kit Set
  6. Keihin 99101-116 Series Main Jet 75 - Fits: Honda CRF110F 2013-2018
  7. TC-Motor Main Jet Set 155/158/160/162/165/168/170/172/175/178 Pilot Slow Jet 21 Series #32 - #55 For...
  8. Suzuki DRZ400S DRZ400 DRZ 400 S Custom Pilot Main Carburetor Carb Stage 1-7 Jet Kit
  9. MAIN & INTERMEDIATE JET ASSORTMENT KIT FOR S&S SUPER E, B CARB CARBURETOR HARLEY
  10. Bicycle Motor Works H60-JET - Fine Tuning Jet Set - High 60's (Pack of 5)



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Care & Cleaning


Electronics


Exterior Accessories


Interior Accessories


Lights


Oils & Fluids


Tires & Wheels


Tools & Equipment


Performance Parts


Rv Parts


Motorcycle & Powersports


Replacement Parts