Frontpage > Car & Automotive > Performance Parts > Fuel Injection Throttle Valves

Best Fuel Injection Throttle Valves - Buying Guide

Last Updated: 11/20/2018

Share on


  #1

CSR Performance Products 6012 12' Zero Friction Push/Pull Cable

Model: 6012   |    Mpn: 6012   |    Ean: 0816905001215   |    PartNumber: 6012   |   Asin: B003OCGRFS

Push/Pull Cable - 12'

Features

Brand: CSR Performance Products   |   Manufacturer: CSR Performance Products

Item Dimensions: 1.5 x 14.8 x 14.9 inches (3.8 x 37.6 x 37.8 cm)   |   Package Dimensions: 3.84 x 5.61 x 8.06 inches (9.8 x 14.2 x 20.5 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

TCI 370816 Throttle Valve Cable Corrector Kit

Model: 370816   |    Mpn: 370816   |    Ean: 0788120076142   |    PartNumber: 370816   |   Asin: B00C5M5XYY

TCI 370816 TV Cable Connector Kit For Holley Carbs. Product Dimension (LxWxH): 18.4x14.4x4.7.

Features

Brand: TCI   |   Manufacturer: TCI

Item Dimensions: 8.25 x 3.25 x 9 inches (21.0 x 8.3 x 22.9 cm)   |   Package Dimensions: 4.6 x 4.6 x 20.5 inches (11.7 x 11.7 x 52.1 cm)

Amazon Price: $92.88 | as of 11/20/2018(2:17am pst)
Availibility: Usually ships in 24 hours
List Price: $113.69

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

Econoaid 1001 Aluminum Throttle Body Spacer

Model: AIR-1001   |    Mpn: 1001   |    Ean: 0642046010010   |    PartNumber: 1001   |   Asin: B003FXSJMU

07-12 GM Truck/SUV/Car 4.8 - 6.2L Econoaid Throttle Body Spacer is designed to fit between your factory throttle body and your intake manifold. Econoaid Throttle Body Spacer spins the incoming air as it passes through the throttle body and over the Econoaid blades. The turbulent air charge is carried through past intake valves for better atomization and more complete combustion. The Econoaid Throttle Body Spacer will give you a crisper throttle response, along with better gas mileage. Unlike other spacers, the Econoaid Throttle Body Spacer installs easier and faster. The Econoaid is only a fraction of an inch thick, 0.030 inch actually. Other spacers are as much as a 1 inch thick, necessitating additional hardware, complicating installation and adding to cost. The main benefit of the Econoaid is the fuel savings. The results of this fuel saving device will always vary depending on vehicle type, driving habits, age of the vehicle, and driving environment, among other factors. However, from customer reports, the average vehicle will see an extra 1-3 miles per gallon and produce an extra 6-10 feet pounds of torque, which can be felt from the increased low-end throttle response. The Econoaid Throttle Body Spacer will pay for itself in no time, especially with current increasing gas prices. Econoaid come complete with all necessary gaskets, detailed installation instructions, and reuses the factory hardware. Installation requires only simple hand tools and usually only takes about 30 minutes. Econoaid made in the USA.

Features

  • Spins intake air through throttle body and into intake valves
  • Better atomization of fuel for better combustion and engine efficiency
  • Increases low-end throttle response
  • Emissions legal in all 50 states
  • Installs in 30-45 minutes
  • Save gas, improve fuel efficiency
  • Aircraft quality aluminum
  • Increase throttle response
  • Made in the USA
  • Easy 30 minute install
  • See more on Amazon...

Brand: Econoaid   |   Manufacturer: Econoaid

Item Dimensions: 0.75 x 6 x 8 inches (1.9 x 15.2 x 20.3 cm)   |   Package Dimensions: 0.7 x 5.7 x 7.8 inches (1.8 x 14.5 x 19.8 cm)

First Available: 2012-05-18

Warranty: Lifetime Guarantee

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

Racing Power Company R6054 24" Stainless Steel Throttle Cable for Ford EFI

Model: R6054   |    Mpn: R6054   |    Ean: 0859828605405   |    PartNumber: R6054   |   Asin: B00BV4G11Q

R6054 Racing Power Company

Features

  • Most orders delivered 2-3 days when purchased from AutoPartsWAY
  • Comes with full manufacturer warranty
  • Most orders leave warehouse same day
  • See more on Amazon...

Brand: Racing Power   |   Manufacturer: Racing Power Company

Item Dimensions: 12 x 120 x 162 inches (30.5 x 304.8 x 411.5 cm)   |   Package Dimensions: 1 x 10 x 13.5 inches (2.5 x 25.4 x 34.3 cm)

Amazon Price: $28.95 | as of 11/20/2018(2:17am pst)
Availibility: Usually ships in 1-2 business days
List Price: $28.95

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

Econoaid 1004 Aluminum Throttle Body Spacer

Model: AIR-1004   |    Mpn: 1004   |    Ean: 0642046010041   |    PartNumber: 1004   |   Asin: B003G60P0A

91-06 Jeep TJ, YJ, XJ, Cherokee 4.0L Econoaid Throttle Body Spacer is designed to fit between your factory throttle body and your intake manifold. Econoaid Throttle Body Spacer spins the incoming air as it passes through the throttle body and over the Econoaid blades. The turbulent air charge is carried through past intake valves for better atomization and more complete combustion. The Econoaid Throttle Body Spacer will give you a crisper throttle response, along with better gas mileage. Unlike other spacers, the Econoaid Throttle Body Spacer installs easier and faster. The Econoaid is only a fraction of an inch thick, 0.030 inch actually. Other spacers are as much as a 1 inch thick, necessitating additional hardware, complicating installation and adding to cost. The main benefit of the Econoaid is the fuel savings. The results of this fuel saving device will always vary depending on vehicle type, driving habits, age of the vehicle, and driving environment, among other factors. However, from customer reports, the average vehicle will see an extra 1-3 miles per gallon and produce an extra 6-10 feet pounds of torque, which can be felt from the increased low-end throttle response. The Econoaid Throttle Body Spacer will pay for itself in no time, especially with current increasing gas prices. Econoaid come complete with all necessary gaskets, detailed installation instructions, and reuses the factory hardware. Installation requires only simple hand tools and usually only takes about 30 minutes. Econoaid made in the USA.

Features

  • Spins intake air through throttle body and into intake valves
  • Better atomization of fuel for better combustion and engine efficiency
  • Increases low-end throttle response
  • Emissions legal in all 50 states
  • Installs in 30-45 minutes
  • Save gas, improve fuel efficiency
  • Aircraft quality aluminum
  • Increase throttle response
  • Made in the USA
  • Easy 30 minute install
  • See more on Amazon...

Brand: Econoaid   |   Manufacturer: Econoaid

Item Dimensions: 8.13 x 0.69 x 6 inches (20.7 x 1.8 x 15.2 cm)   |   Package Dimensions: 0.7 x 5.7 x 7.8 inches (1.8 x 14.5 x 19.8 cm)

First Available: 2012-05-18

Amazon Price: $30.59 | as of 11/20/2018(2:17am pst)
Availibility: Usually ships in 24 hours
List Price: $33.03

Warranty: Lifetime Guarantee

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

Fast 307015 GM LT1/LT4 IAC Motor

Model: 307015   |    Mpn: 307015   |    Ean: 0036584124214   |    PartNumber: 307015   |   Asin: B002EDV8XO

307015 30182 IAC Used on the Air Only Throttle Bodies like 307603 This is an LT-1/LT-4 Design used on 93-95 Camaro Firebird Has 4 Male Metripack Terminals Connects direct to EZ 2.0 Harness w/o AdapterFuel Injection Idle Air Control ValveIAC ValveIAC Valve LT1LT1 Style Idle Air Control ValveThe idle air control allows the ECU system to control engine idle speed by controlling airflow around the throttle body blades.This IAC is an LT1 style IAC. Features 4 Male Metripack Terminals.

Features

  • Allows the ECU to control engine idle speed by controlling airflow around the throttle body blades
  • See more on Amazon...

Brand: FAST   |   Manufacturer: FAST

Item Dimensions: 2 x 3.75 x 6.5 inches (5.1 x 9.5 x 16.5 cm)   |   Package Dimensions: 1.8 x 3.2 x 6.2 inches (4.6 x 8.1 x 15.7 cm)

First Available: 2012-06-21

Amazon Price: $61.45 | as of 11/20/2018(2:17am pst)
Availibility: Usually ships in 24 hours
List Price: $61.45

Warranty: 1 Year Limited

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

TCI 370815 Throttle Valve Cable Corrector Kit

Model: 370815   |    Mpn: 370815   |    Ean: 0788120076135   |    PartNumber: 370815   |   Asin: B00E9792CW

The original Torque Converters, Inc. turns cutting edge technology into a race winning tradition. When TCI first opened its doors in 1968, it was a modest operation dedicated to delivering high performance transmission-related parts to a small group of devout drag racing enthusiasts. From those humble beginnings in Memphis, TN, TCI has grown to be one of the largest and most technologically advanced manufacturers of high performance aftermarket drivetrain products in the world. Currently located in two large facilities in Ashland, MS, some 45 miles from parent company the COMP Performance Group, TCI continues to set trends and expand its line of quality transmission torque converter and accessory parts. The original directive, to deliver high performance racing torque converters, is still a core business for TCI. However, the need for high performance street products, including high-quality automatic transmissions, has increased dramatically, led by an eager contingent of enthusiasts who enjoy improving the performance of their street driven vehicles. Because of these changing trends, TCI business has changed considerably with 80 percent of their products targeted to street enthusiasts and 20 percent to hard-core drag and circle track racers.

Features

  • Kickdown Cable - Self Adjusting - Steel - Edelbrock Carburetor - 200R4 / 700R4 - Kit
  • See more on Amazon...

Brand: TCI   |   Manufacturer: TCI

Item Dimensions: 8.25 x 3.25 x 9 inches (21.0 x 8.3 x 22.9 cm)   |   Package Dimensions: 5.4 x 5.6 x 20.2 inches (13.7 x 14.2 x 51.3 cm)

Amazon Price: $92.88 | as of 11/20/2018(2:17am pst)
Availibility: Usually ships in 24 hours
List Price: $113.69

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

Econoaid 1009 Aluminum Throttle Body Spacer

Model: 1009   |    Mpn: 1009   |    Ean: 0642046010096   |    PartNumber: 1009   |   Asin: B003G7J88Y

05-09 Ford Mustang, Crown Vic, Explorer 4.0L and 4.6L Econoaid Throttle Body Spacer is designed to fit between your factory throttle body and your intake manifold. Econoaid Throttle Body Spacer spins the incoming air as it passes through the throttle body and over the Econoaid blades. The turbulent air charge is carried through past intake valves for better atomization and more complete combustion. The Econoaid Throttle Body Spacer will give you a crisper throttle response, along with better gas mileage. Unlike other spacers, the Econoaid Throttle Body Spacer installs easier and faster. The Econoaid is only a fraction of an inch thick, 0.030 inch actually. Other spacers are as much as a 1 inch thick, necessitating additional hardware, complicating installation and adding to cost. The main benefit of the Econoaid is the fuel savings. The results of this fuel saving device will always vary depending on vehicle type, driving habits, age of the vehicle, and driving environment, among other factors. However, from customer reports, the average vehicle will see an extra 1-3 miles per gallon and produce an extra 6-10 feet pounds of torque, which can be felt from the increased low-end throttle response. The Econoaid Throttle Body Spacer will pay for itself in no time, especially with current increasing gas prices. Econoaid come complete with all necessary gaskets, detailed installation instructions, and reuses the factory hardware. Installation requires only simple hand tools and usually only takes about 30 minutes. Econoaid made in the USA.

Features

  • Spins intake air through throttle body and into intake valves
  • Better atomization of fuel for better combustion and engine efficiency
  • Increases low-end throttle response
  • Emissions legal in all 50 states
  • Installs in 30-45 minutes
  • Save gas, improve fuel efficiency
  • Aircraft quality aluminum
  • Increase throttle response
  • Made in the USA
  • Easy 30 minute install
  • See more on Amazon...

Brand: Econoaid   |   Manufacturer: Econoaid

Item Dimensions: 8.13 x 0.69 x 6 inches (20.7 x 1.8 x 15.2 cm)   |   Package Dimensions: 0.6 x 5.7 x 7.8 inches (1.5 x 14.5 x 19.8 cm)

First Available: 2012-05-18

Warranty: Lifetime Guarantee

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

CSR Performance Products 6005 5' Zero Friction Push/Pull Cable

Model: 6005   |    Mpn: 6005   |    Ean: 0816905001055   |    PartNumber: 6005   |   Asin: B003OCPO3E

Rowland Wood and Clyde Beckenbach have been manufacturing high quality, American-made high performance products at CSR Performance Products since 1989. The product line consists of water pumps, cooling products, starters, accessories, transmission shields and more.

Features

Brand: CSR Performance Products   |   Manufacturer: CSR Performance Products

Item Dimensions: 1.6 x 16.5 x 17.1 inches (4.1 x 41.9 x 43.4 cm)   |   Package Dimensions: 3.84 x 5.61 x 8.06 inches (9.8 x 14.2 x 20.5 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

Econoaid 1019 Aluminum Throttle Body Spacer

Model: AIR-1019   |    Mpn: 1019   |    Ean: 0642046010195   |    PartNumber: 1019   |   Asin: B003GEKSXG

03-09 Toyota 4Runner, 05-12 Tacoma, 07-09 FJ Cruiser 4.0L Econoaid Throttle Body Spacer is designed to fit between your factory throttle body and your intake manifold. Econoaid Throttle Body Spacer spins the incoming air as it passes through the throttle body and over the Econoaid blades. The turbulent air charge is carried through past intake valves for better atomization and more complete combustion. The Econoaid Throttle Body Spacer will give you a crisper throttle response, along with better gas mileage. Unlike other spacers, the Econoaid Throttle Body Spacer installs easier and faster. The Econoaid is only a fraction of an inch thick, 0.030 inch actually. Other spacers are as much as a 1 inch thick, necessitating additional hardware, complicating installation and adding to cost. The main benefit of the Econoaid is the fuel savings. The results of this fuel saving device will always vary depending on vehicle type, driving habits, age of the vehicle, and driving environment, among other factors. However, from customer reports, the average vehicle will see an extra 1-3 miles per gallon and produce an extra 6-10 feet pounds of torque, which can be felt from the increased low-end throttle response. The Econoaid Throttle Body Spacer will pay for itself in no time, especially with current increasing gas prices. Econoaid come complete with all necessary gaskets, detailed installation instructions, and reuses the factory hardware. Installation requires only simple hand tools and usually only takes about 30 minutes. Econoaid made in the USA.

Features

  • Spins intake air through throttle body and into intake valves
  • Better atomization of fuel for better combustion and engine efficiency
  • Increases low-end throttle response
  • Emissions legal in all 50 states
  • Installs in 30-45 minutes
  • Save gas, improve fuel efficiency
  • Aircraft quality aluminum
  • Increase throttle response
  • Made in the USA
  • Easy 30 minute install
  • See more on Amazon...

Brand: Econoaid   |   Manufacturer: Econoaid

Item Dimensions: 8.13 x 0.69 x 6 inches (20.7 x 1.8 x 15.2 cm)   |   Package Dimensions: 0.6 x 5.7 x 7.8 inches (1.5 x 14.5 x 19.8 cm)

First Available: 2012-05-18

Warranty: Lifetime Guarantee

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

CSR Performance Products 6003 3' Zero Friction Push/Pull Cable

Model: 6003   |    Mpn: 6003   |    Ean: 0816905001031   |    PartNumber: 6003   |   Asin: B003OCEXMC

Rowland Wood and Clyde Beckenbach have been manufacturing high quality, American-made high performance products at CSR Performance Products since 1989. The product line consists of water pumps, cooling products, starters, accessories, transmission shields and more.

Features

Brand: CSR Performance Products   |   Manufacturer: CSR Performance Products

Item Dimensions: 1.8 x 17.1 x 17.1 inches (4.6 x 43.4 x 43.4 cm)   |   Package Dimensions: 3.84 x 5.61 x 8.06 inches (9.8 x 14.2 x 20.5 cm)

Amazon Price: $42.99 | as of 11/20/2018(2:17am pst)
Availibility: Usually ships in 24 hours
List Price: $42.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

Blox Racing BXFU-00300-BK Black Type-A MAP Bypass Valve

Model: BXFU-00300-BK   |    Mpn: BXFU-00300-BK   |    Ean: 0608067823572   |    PartNumber: BXFU-00300-BK   |   Asin: B007SQ2CJQ

The Blox Racing MAP Bypass Valve is designed for use with forced-induction applications. Blox Racing spends countless hours designing, engineering and testing so each product is able to offer the enthusiast both form and function. The manufacturing processes used either meet or exceed OEM standards, while materials reflect the same quality used by major OEM auto manufacturers. Blox Racing and its manufacturing partners meet or exceed ISO 9001 certification which further ensures Blox Racing's overall commitment to the highest standards of production management and quality control. Blox Racing is dedicated to the development of high quality performance products and accessories for today's import and sport compact enthusiast. Each product is designed and manufactured using the latest in cutting-edge technologies, processes and materials and then tested using rigorous standards. Each Blox Racing product is designed to work with one another, giving enthusiasts the proper foundation and building blocks for developing the right performance combination.

Features

  • The MAP Bypass Valve completely blocks boost from reaching the MAP sensor, thus simulating a wide-open-throttle reading at the vehicle's ECU
  • Throttle body mounted MAP sensors
  • Quality products that are durable and reliable
  • See more on Amazon...

Brand: Blox Racing   |   Manufacturer: Blox Racing

Package Dimensions: 1 x 2.5 x 5.5 inches (2.5 x 6.4 x 14.0 cm)

First Available: 2013-08-02

Amazon Price: $38.92 | as of 11/20/2018(2:17am pst)
Availibility: Temporarily out of stock. Order now and we'll deliver when available. We'll e-mail you with an estimated delivery date as soon as we have more information. Your credit card will not be charged until we ship the item.
List Price: $40.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

Fast 307016 Remote IAC Valve Adapter with Filter

Model: 307016   |    Mpn: 307016   |    Ean: 0036584123040   |    PartNumber: 307016   |   Asin: B002EE1TW8

Iac Valve Adapter With Filter Allows The Ecu To Control Engine Idle Speed By Controlling Airflow Around The Throttle Body Blades

Features

  • IAC valve adapter with filter
  • Allows the ECU to control engine idle speed by controlling airflow around the throttle body blades
  • See more on Amazon...

Brand: FAST   |   Manufacturer: FAST

Item Dimensions: 1.5 x 5.75 x 9.5 inches (3.8 x 14.6 x 24.1 cm)   |   Package Dimensions: 1.4 x 5.6 x 9 inches (3.6 x 14.2 x 22.9 cm)

First Available: 2012-06-21

Amazon Price: $159.99 | as of 11/20/2018(2:17am pst)
Availibility: Usually ships in 24 hours
List Price: $227.50

Warranty: 1 Year Limited

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

CSR Performance Products 6006 6 'Zero Friction Push/Pull Cable

Model: 6006   |    Mpn: 6006   |    Ean: 0816905001062   |    PartNumber: 6006   |   Asin: B003OCPOJS

Rowland Wood and Clyde Beckenbach have been manufacturing high quality, American-made high performance products at CSR Performance Products since 1989. The product line consists of water pumps, cooling products, starters, accessories, transmission shields and more.

Features

Brand: CSR Performance Products   |   Manufacturer: CSR Performance Products

Item Dimensions: 1.9 x 17.2 x 17 inches (4.8 x 43.7 x 43.2 cm)   |   Package Dimensions: 3.84 x 5.61 x 8.06 inches (9.8 x 14.2 x 20.5 cm)

Amazon Price: $36.99 | as of 11/20/2018(2:17am pst)
Availibility: Usually ships in 24 hours
List Price: $36.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

CSR Performance Products 6002 2' Zero Friction Morse Cable

Model: 6002   |    Mpn: 6002   |    PartNumber: 6002   |   Asin: B003OCO962

CSR Performance Products 6002 MORSE CABLE - 2FT..

Features

Brand: CSR Performance Products   |   Manufacturer: CSR Performance Products

Item Dimensions: 210 x 204 x 204 inches (533.4 x 518.2 x 518.2 cm)   |   Package Dimensions: 3.84 x 5.61 x 8.06 inches (9.8 x 14.2 x 20.5 cm)

Amazon Price: $36.99 | as of 11/20/2018(2:17am pst)
Availibility: Usually ships in 24 hours
List Price: $36.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

Racing Power Company R6054X 36" Stainless Steel Throttle Cable for Ford EFI

Model: R6054X   |    Mpn: R6054X   |    Ean: 0859828605412   |    PartNumber: R6054X   |   Asin: B00BV4G292

Racing Power Company R6054X 36 Stainless Steel Throttle Cable for Ford EFI

Features

Brand: Racing Power   |   Manufacturer: Racing Power Company

Item Dimensions: 1 x 13.6 x 9.75 inches (2.5 x 34.5 x 24.8 cm)   |   Package Dimensions: 1 x 9.75 x 13.5 inches (2.5 x 24.8 x 34.3 cm)

Amazon Price: $31.78 | as of 11/20/2018(2:17am pst)
Availibility: Usually ships in 24 hours
List Price: $34.23

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

Blox Racing BXFU-00302-GM Gun Metal Type-C MAP Bypass Valve

Model: BXFU-00302-GM   |    Mpn: BXFU-00302-GM   |    PartNumber: BXFU-00302-GM   |   Asin: B007ZDOZ38

The Blox Racing MAP Bypass Valve is designed for use with forced-induction applications. Blox Racing spends countless hours designing, engineering and testing so each product is able to offer the enthusiast both form and function. The manufacturing processes used either meet or exceed OEM standards, while materials reflect the same quality used by major OEM auto manufacturers. Blox Racing and its manufacturing partners meet or exceed ISO 9001 certification which further ensures Blox Racing's overall commitment to the highest standards of production management and quality control. Blox Racing is dedicated to the development of high quality performance products and accessories for today's import and sport compact enthusiast. Each product is designed and manufactured using the latest in cutting-edge technologies, processes and materials and then tested using rigorous standards. Each Blox Racing product is designed to work with one another, giving enthusiasts the proper foundation and building blocks for developing the right performance combination.

Features

  • The MAP Bypass Valve completely blocks boost from reaching the MAP sensor, thus simulating a wide-open-throttle reading at the vehicle's ECU
  • Throttle body mounted MAP sensors
  • Quality products that are durable and reliable
  • See more on Amazon...

Brand: Blox Racing   |   Manufacturer: Blox Racing

Package Dimensions: 1.02 x 5.12 x 5.43 inches (2.6 x 13.0 x 13.8 cm)

First Available: 2013-08-02

Amazon Price: $22.32 | as of 11/20/2018(2:17am pst)
Availibility: Usually ships in 24 hours
List Price: $40.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

Blox Racing BXFU-00300-RD Red Type-A MAP Bypass Valve

Model: BXFU-00300-RD   |    Mpn: BXFU-00300-RD   |    PartNumber: BXFU-00300-RD   |   Asin: B007ZDOWWM

The Blox Racing MAP Bypass Valve is designed for use with forced-induction applications. Blox Racing spends countless hours designing, engineering and testing so each product is able to offer the enthusiast both form and function. The manufacturing processes used either meet or exceed OEM standards, while materials reflect the same quality used by major OEM auto manufacturers. Blox Racing and its manufacturing partners meet or exceed ISO 9001 certification which further ensures Blox Racing's overall commitment to the highest standards of production management and quality control. Blox Racing is dedicated to the development of high quality performance products and accessories for today's import and sport compact enthusiast. Each product is designed and manufactured using the latest in cutting-edge technologies, processes and materials and then tested using rigorous standards. Each Blox Racing product is designed to work with one another, giving enthusiasts the proper foundation and building blocks for developing the right performance combination.

Features

  • The MAP Bypass Valve completely blocks boost from reaching the MAP sensor, thus simulating a wide-open-throttle reading at the vehicle's ECU
  • Throttle body mounted MAP sensors
  • Quality products that are durable and reliable
  • See more on Amazon...

Brand: Blox Racing   |   Manufacturer: Blox Racing

Package Dimensions: 0.71 x 4.88 x 5.51 inches (1.8 x 12.4 x 14.0 cm)

First Available: 2013-08-02

Amazon Price: $40.00 | as of 11/20/2018(2:17am pst)
Availibility: Usually ships in 24 hours
List Price: $40.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. Econoaid 1001 Aluminum Throttle Body Spacer
  2. Econoaid 1009 Aluminum Throttle Body Spacer
  3. Econoaid 1019 Aluminum Throttle Body Spacer
  4. Fast 307015 GM LT1/LT4 IAC Motor
  5. Econoaid 1004 Aluminum Throttle Body Spacer

Most Wished For

  1. TCI 370816 Throttle Valve Cable Corrector Kit
  2. Econoaid 1004 Aluminum Throttle Body Spacer
  3. TCI 370815 Throttle Valve Cable Corrector Kit
  4. Econoaid 1009 Aluminum Throttle Body Spacer
  5. Econoaid 1001 Aluminum Throttle Body Spacer
  6. Econoaid 1019 Aluminum Throttle Body Spacer
  7. Fast 307015 GM LT1/LT4 IAC Motor
  8. CSR Performance Products 6003 3' Zero Friction Push/Pull Cable
  9. Blox Racing BXFU-00300-BK Black Type-A MAP Bypass Valve
  10. Fast 307016 Remote IAC Valve Adapter with Filter

Most Gifted

  1. Econoaid 1001 Aluminum Throttle Body Spacer
  2. Econoaid 1009 Aluminum Throttle Body Spacer
  3. Econoaid 1019 Aluminum Throttle Body Spacer
  4. Fast 307015 GM LT1/LT4 IAC Motor
  5. Econoaid 1004 Aluminum Throttle Body Spacer

Top Selling

  1. CSR Performance Products 6012 12' Zero Friction Push/Pull Cable
  2. TCI 370816 Throttle Valve Cable Corrector Kit
  3. Econoaid 1001 Aluminum Throttle Body Spacer
  4. Racing Power Company R6054 24" Stainless Steel Throttle Cable for Ford EFI
  5. Econoaid 1004 Aluminum Throttle Body Spacer
  6. Fast 307015 GM LT1/LT4 IAC Motor
  7. TCI 370815 Throttle Valve Cable Corrector Kit
  8. Econoaid 1009 Aluminum Throttle Body Spacer
  9. CSR Performance Products 6005 5' Zero Friction Push/Pull Cable
  10. Econoaid 1019 Aluminum Throttle Body Spacer



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Care & Cleaning


Electronics


Exterior Accessories


Interior Accessories


Lights


Oils & Fluids


Tires & Wheels


Tools & Equipment


Performance Parts


Rv Parts


Motorcycle & Powersports


Replacement Parts



We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.