Frontpage > Car & Automotive > Performance Parts > Fuel Injectors & Parts

Best Fuel Injectors & Parts - Buying Guide

Last Updated: 10/20/2019

Share on


  #1

AEM 30-3003 Water/Methanol Injection Filter

Model: 30-3003   |    Mpn: 303003   |    Ean: 0840879020941   |    PartNumber: 303003   |   Asin: B0032W3KH8

The AEM Water/Methanol Injection Filter is an in-line filter that uses a micronic mesh screen to filter particulates as small as 40 microns. This allows a cleaner flow of water/methanol to be passed into the engine, not only protecting the internals of the engine itself, but also the working parts of the water/methanol pump too. Run the AEM Water/Methanol Injection Filter in-line before the pump to protect both pump and engine. If you are using a Water/Methanol Injection System it may greatly increase pump life to use a water/methanol filter. The AEM Water/Methanol Injection Filter prevents foreign particles as small as 40 microns from clogging or damaging pumps, injection nozzles check valves or flow sensors. The AEM Water/Methanol Injection Filter uses fittings for use with 1/4inches OD nylon tubing, so it fits most Water/Methanol injection kits on the market today.

Features

  • Simple to install, takes less than a minute
  • Polypropylene housing-rugged material that is compatible with high concentrations of methanol
  • Completely serviceable assembly, can be disassembled, cleaned and reused for a long service life
  • Stainless Steel mesh strainer-AEMs custom mesh strainer filters down to 40 microns, much smaller than similar filters
  • Large Filtering Area assure long service life and does not significantly reduce flow
  • See more on Amazon...

Brand: AEM   |   Manufacturer: AEM

Item Dimensions: 1.97 x 3.94 x 5.91 inches (5.0 x 10.0 x 15.0 cm)   |   Package Dimensions: 2.2 x 3.4 x 3.9 inches (5.6 x 8.6 x 9.9 cm)

Amazon Price: $28.91 | as of 10/20/2019(6:33pm pst)
Availibility: Usually ships in 24 hours
List Price: $31.65

Warranty: Please note that before we can issue a Returned Merchandise Authorization number (RMA) for AEM Electronics products, it is first necessary for the installer or end user to contact our Electronics tech line at 1-800-423-0046 to discuss the problem. Most issues can be solved over the phone. Under no circumstances should a system be returned or RMA requested before the above process transpires. Advanced Engine Management Inc. warrants to the consumer that all AEM High Performance products will be free from defects in material and workmanship for a period of twelve (12) months from date of the original purchase. Products that fail within this 12 month warranty period will be repaired or replaced at AEM's option, when determined by AEM that the product failed due to defects in material or workmanship. This warranty is limited to the repair or replacement of the AEM part. In no event shall this warranty exceed the original purchase price of the AEM part nor shall AEM be responsible for special, incidental or consequential damages or cost incurred due to the failure of this product. Warranty claims to AEM must be transportation prepaid and accompanied with dated proof of purchase. This warranty applies only to the original purchaser of product and is non-transferable. All implied warranties shall be limited in duration to the said 12 month warranty period. Improper use or installation, use for racing, accident, abuse, unauthorized repairs or alterations voids this warranty. AEM disclaims any liability for consequential damages due to breach of any written or implied warranty on all products manufactured by AEM. Warranty returns will only be accepted by AEM when accompanied by a valid Return Merchandise Authorization (RMA) number. Credit for defective products will be issued pending inspection. Product must be received by AEM within 30 days of the date RMA is issued.

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

MagnaFuel MP-4550-SK Seal Kit for QuickStar 275

Model: MP-4550-SK   |    Mpn: MP-4550-SK   |    Ean: 0819315000892   |    PartNumber: MP-4550-SK   |   Asin: B005JVH22Y

MAGNAFUEL/MAGNAFLOW FUEL SYSTEMS MP-4550-SK QuickStar 275 Seal Kit

Features

Brand: MagnaFuel   |   Manufacturer: MagnaFuel

Package Dimensions: 0.5 x 4 x 4 inches (1.3 x 10.2 x 10.2 cm)

Amazon Price: $22.99 | as of 10/20/2019(6:33pm pst)
Availibility: Usually ships in 24 hours
List Price: $25.50

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

AEM 30-3350 AEM30-3350

Model: 30-3350   |    Mpn: 30-3350   |    Ean: 0840879022617   |    PartNumber: 30-3350   |   Asin: B00GSBRUP8

Water/methanol injection for gas engines is a proven means for effectively reducing engine inlet air temperatures and suppressing harmful detonation on forced induction and high performance naturally aspirated race engines. This allows enthusiasts to reliably increase boost and advance ignition timing-without using high-octane racing fuel-for power gains of up to 20percent. AEM's Water/Methanol Injection Systems utilize the most robust hardware combined with more advanced features than any other comparably priced water/methanol system. The on-demand progressive Multi-Input controller in AEM's PN 30-3350 Water/Methanol Injection kit for gasoline vehicles features a multiple input design that enables users to install AEM's Water/Methanol Injection Kit on both high compression naturally aspirated vehicles (NA) via the MAF/IDC settings and ultra-high boost vehicles (above 35 PSI) using an external MAP sensor. The Multi-Input controller works with an external 0-5v voltage-based external MAP sensor, a frequency based input for Injector Duty Cycle (IDC), frequency-based mass airflow (MAF), or a 0-5v voltage-based MAF. The new controller design features large, turn-resistant knobs and larger numbering to easily set accurate start and full activation points, with covered status LED and test buttons for added splash resistance. A plug is integrated into the controller housing for mating to the redesigned wiring harness's positive-lock connector. The Multi-Input controller has an easy-to-remove plug covering the programming dipswitches and a programming legend on the back for the 0-5v and frequency based settings. The controller housing features an easy to access integrated fuse and molded mounting tabs. AEM's Multi-Input PN 30-3350 gasoline Water/Methanol Injection system's compact 1 gallon tank includes a high tech conductive low fluid level indicator with a positive lock connector and color matched wires to the wiring harness.

Features

  • Multi-Input, 0-5V/frequency-based progressive controller design for use with external MAP sensor for boost or MAF/IDC on high compression NA gas vehicles
  • Multi-Input controller features large adjustment knobs, integrated plug for harness connection, integrated fuse, covered status light and test buttons for enhanced splash resistance and mounting tabs
  • Wiring harness is terminated with a positive-lock connector on one end with color-coded wires to ease installation, power and ground wires for the pump and additional wire for optional on/off fluid solenoid boost safe failsafe output included
  • Internally-bypassed water/methanol injection pump does not cycle on/off and provides quiet, smooth operation; it features robust construction including integral hose fittings
  • Precision-machined billet-aluminum injector with integral check valve; three interchangeable injector nozzles to cover a wide variety of HP levels
  • See more on Amazon...

Brand: AEM   |   Manufacturer: AEM

Item Dimensions: 6 x 9 x 9 inches (15.2 x 22.9 x 22.9 cm)   |   Package Dimensions: 5.5 x 12.3 x 13 inches (14.0 x 31.2 x 33.0 cm)

First Available: 2013-11-20

Amazon Price: $416.33 | as of 10/20/2019(6:33pm pst)
Availibility: Usually ships in 24 hours
List Price: $487.27 | Used Price: $348.08

Warranty: 1 Year

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

Holley 534-102 LT1 Style Fuel Injector Retainer

Model: 534-102   |    Mpn: 534102   |    Ean: 0090127434840   |    PartNumber: 534102   |   Asin: B00062ZFRA

Holley products have been the undisputed leader in fuel systems for over 100 years. Holley carburetors power every NASCAR Sprint Cup team and every NHRA Pro Stock champion. Holleys products include performance fuel pumps, fuel injection, intake manifolds, cylinder heads & engine dress up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies, Hooker Headers, Flowtech Headers, NOS, Weiand, or Earls, Holley products can give you the edge you need over the competition.

Features

Brand: Holley   |   Manufacturer: Holley EFI

Package Dimensions: 1.3 x 3.7 x 4.9 inches (3.3 x 9.4 x 12.4 cm)

Amazon Price: $8.62 | as of 10/20/2019(6:33pm pst)
Availibility: Usually ships in 24 hours
List Price: $8.87

Warranty: Y

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

MagnaFuel MP-4501-SK Seal Kit for QuickStar 275/300

Model: MP-4501-SK   |    Mpn: MP-4501-SK   |    Ean: 0819315000878   |    PartNumber: MP-4501-SK   |   Asin: B003TQ25H8

Seal Kit Fits QuickStar 275, 300 Series Pumps without Filter

Features

Brand: MagnaFuel   |   Manufacturer: MagnaFuel

Item Dimensions: 1 x 4 x 4 inches (2.5 x 10.2 x 10.2 cm)   |   Package Dimensions: 1 x 4 x 4 inches (2.5 x 10.2 x 10.2 cm)

Amazon Price: $20.49 | as of 10/20/2019(6:33pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $23.71

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

AEM 2-777 Injector Bung Kit

Model: AEM-2-777   |    Mpn: 2-777   |    Ean: 0024844332202   |    PartNumber: 2-777   |   Asin: B00GUO3UHU

AEM produces a variety of accessories and miscellaneous parts.

Features

  • Fits a 2 to 3 inch diameter aluminum tube
  • Welds onto intercooler and intake piping
  • 1/8 inch NPT fitting accommodates injector nozzles
  • Made from aluminum that can be welded
  • See more on Amazon...

Brand: AEM   |   Manufacturer: AEM

Package Dimensions: 0.24 x 3.03 x 4.72 inches (0.6 x 7.7 x 12.0 cm)

Amazon Price: $30.29 | as of 10/20/2019(6:33pm pst)
Availibility: Usually ships in 24 hours
List Price: $30.29

Warranty: 3 Months

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

MagnaFuel MP-1025 Single Relay Harness

Model: MP-1025   |    Mpn: MP-1025   |    Ean: 0819315000014   |    PartNumber: MP-1025   |   Asin: B003TQ1WQS

Magnafuel MP-1025 SINGLE RELAY HARNESS.

Features

Brand: MagnaFuel   |   Manufacturer: MagnaFuel

Item Dimensions: 18 x 48 x 120 inches (45.7 x 121.9 x 304.8 cm)   |   Package Dimensions: 1.5 x 4 x 10 inches (3.8 x 10.2 x 25.4 cm)

Amazon Price: $20.49 | as of 10/20/2019(6:33pm pst)
Availibility: Usually ships in 24 hours
List Price: $27.48

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

Aeromotive 12604 Replacement Filter Element, 100-Micron Stainless Mesh, Fits All 2" OD Filter Housings

Model: 12604   |    Mpn: 12604   |    Ean: 0684980000252   |    PartNumber: 12604   |   Asin: B000CFSKWS

Aeromotive Inc. is a true high performance aftermarket manufacturer specializing in fuel delivery and fuel delivery components. Utilizing aerospace tolerances and procedures, three generations of track experience, and a meticulous approach to engineering, Aeromotive Fuel Systems has become the absolute pinnacle of performance fuel delivery. Recommended for applications burning pump gas, racing gas, diesel fuel, jet fuel, AV-gas, etc. Approved for use in alcohol fuels including ethanol and methanol. Over 60-sq. inches of element surface area supports high flow while providing good service life. Cleanable 100-micron Stainless Steel mesh construction. Flow capacity of up to 600 plus GPH (10.00 GPM) with less than 1-PSI pressure drop. Ideal as a pre-pump filter with gasoline, ethanol and Methanol burning engines with small to medium Aeromotive fuel pumps from the 11109 to the A1000 and the SS series fuel pumps. Popular as a post pump filter with 12 Series (belt and hex driven) mechanical fuel pumps and Aeromotive Spur Gear Pumps up to 21 GPM. If you wish to change the filter in your housing from a P/N 12604 100-micron Stainless element to an element with a different micron rating, you may choose one of the following options: P/N 12601 10-micron Fabric P/N 12650 10-micron Micro glass P/N 12635 40-micron Stainless Steel Mesh

Features

  • For 12304/12307/12324 Filter Assembly
  • Mechanical Fuel Pumps up to 21-GPM
  • Supports up to 5,000 plus Flywheel HP, Forced Induction, on gasoline.
  • Supports up to 4,000 Flywheel HP, Forced Induction on Ethanol.
  • Supports up to 2,000 Flywheel HP, Forced Induction on Methanol
  • See more on Amazon...

Brand: Aeromotive   |   Manufacturer: Aeromotive

Package Dimensions: 2.4 x 3.4 x 9 inches (6.1 x 8.6 x 22.9 cm)

Amazon Price: $39.69 | as of 10/20/2019(6:33pm pst)
Availibility: Usually ships in 24 hours
List Price: $40.91

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

Ford Racing (M-9593-LU24A) Hi-Flow Fuel Injector Kit, (Pack of 8)

Model: M-9593-LU24A   |    Mpn: M-9593-LU24A   |    Ean: 0756122226759   |    PartNumber: M-9593-LU24A   |   Asin: B00E89UBMG

FORD RACING 24 LB/HR FUEL INJECTOR SET Overview 24 lb/hr, 6-hole, high-impedance fuel injector with USCAR electrical connector. Latest technology injector design for optimum performance. INJECTOR NOTES The long injectors are the more common length and are applicable to all non-GT500 Mustangs since multi-port injection was introduced Wrong electrical connector for your application Try our M-14464-A8 Fuel Injector Adapter Kit Need help determining which injector you require for your application Refer to EFI Tech Tips About electrical connectors The USCAR connector is sometimes referred to as EV6, which is a Bosch term for the generation of injector. Jetronic is the older style connector, sometimes referred to by the Bosch generation EV1. Neither EV1 or EV6 is technically correct because those generations of Bosch injectors could come with either connector. However, most EV1's commonly seen use the Jetronic connector and most EV6's use the USCAR connector so it's easy to see the connection. Fuel Injector Chart PART NUMBER (SETS OF 8) FLOW RATE IMPEDANCE LENGTH CONNECTOR ADAPTER COLOR M-9593-LU24A 24 lbs/hr. 11-18 ohms L USCAR M-14464-A8 Purple M-9593-MU32 32 lbs./hr. 11-12 ohms M USCAR M-14464-A8 Black w/red stripe M-9593-LU34K 34 lbs./hr. 11-18 ohms L Jetronic/Minitimer INCLUDED Black M-9593-LU34A 34 lbs./hr. 11-18 ohms L USCAR M-14464-A8 Black M-9593-M39 39 lbs/hr. 11-18 ohms L USCAR M-14464-A8 Dark Blue M-9593-G302 47 lbs/hr. 11-18 ohms M USCAR M-14464-A8 Black w/yellow stripe M-9593-LU47 47 lbs/hr. 11-18 ohms L USCAR M-14464-A8 Black w/silver tip M-9593-LU60 60 lbs/hr. 11-12 ohms L USCAR M-14464-A8 Black M-9593-LU80 80 lbs/hr. 11-12 ohms L USCAR M-14464-A8 Black w/blue tip M-9593-MU52 52 lbs/hr. 11-18 ohms M USCAR M-14464-A8 Black Pa

Features

  • Ford Racing M-9593-LU24A Fuel Injector Set; 24 lb/hr; EV6 Body Style; USCAR Connector; 8 pc.;
  • Authorized Dealer - 100% Satisfaction Guaranteed
  • Ford Racing
  • M-9593-LU24A
  • Warranty: Yes
  • See more on Amazon...

Brand: Ford   |   Manufacturer: Ford

Item Dimensions: 3.75 x 6.25 x 4.25 inches (9.5 x 15.9 x 10.8 cm)   |   Package Dimensions: 3.78 x 4.69 x 6.3 inches (9.6 x 11.9 x 16.0 cm)

Amazon Price: $207.95 | as of 10/20/2019(6:33pm pst)
Availibility: Usually ships in 24 hours
List Price: $207.95

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

MSD 2922 Atomic Fuel Return Kit

Model: 2922   |    Mpn: 2922   |    Ean: 0085132029228   |    PartNumber: 2922   |   Asin: B00B81O5Z6

Atomic EFI Fuel Pump Return System; Incl. Fuel Pump w/Fittings And Return Lines;

Features

  • Fuel Line Return Kit - Atomic EFI - Pressure Regulator - 15 ft 3/8 in Fuel Line - Fittings - Kit
  • See more on Amazon...

Brand: MSD   |   Manufacturer: MSD Ignition

Package Dimensions: 3 x 9.9 x 20.6 inches (7.6 x 25.1 x 52.3 cm)

First Available: 2015-02-28

Amazon Price: $324.95 | as of 10/20/2019(6:33pm pst)
Availibility: Usually ships in 24 hours
List Price: $348.95

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

AEM 25-104BK Black High Volume Fuel Rail

Model: 25-104BK   |    Mpn: 25-104BK   |    Ean: 0840879019877   |    PartNumber: 25-104BK   |   Asin: B002YXGN98

AEM25-104BK

Features

  • Applications: 90-93 Honda Accord DX, LX, SE, EX F22 and
  • Applications: 92-01 Honda Prelude S, Si, Si VTEC F22, H23 and H22
  • O.E. fuel pressure regulator or AEM adjustable fuel pressure regulator mounts directly to rail with no modifications
  • Comprehensive installation instructions, hardware, fittings and injector O-rings included
  • No additional parts required for installation
  • See more on Amazon...

Brand: AEM   |   Manufacturer: AEM

Package Dimensions: 3.2 x 3.5 x 15.8 inches (8.1 x 8.9 x 40.1 cm)

Amazon Price: $112.09 | as of 10/20/2019(6:33pm pst)
Availibility: Usually ships in 24 hours
List Price: $113.77

Warranty: Please note that before we can issue a Returned Merchandise Authorization number (RMA) for AEM Electronics products, it is first necessary for the installer or end user to contact our Electronics tech line at 1-800-423-0046 to discuss the problem. Most issues can be solved over the phone. Under no circumstances should a system be returned or RMA requested before the above process transpires. Advanced Engine Management Inc. warrants to the consumer that all AEM High Performance products will be free from defects in material and workmanship for a period of twelve (12) months from date of the original purchase. Products that fail within this 12 month warranty period will be repaired or replaced at AEM's option, when determined by AEM that the product failed due to defects in material or workmanship. This warranty is limited to the repair or replacement of the AEM part. In no event shall this warranty exceed the original purchase price of the AEM part nor shall AEM be responsible for special, incidental or consequential damages or cost incurred due to the failure of this product. Warranty claims to AEM must be transportation prepaid and accompanied with dated proof of purchase. This warranty applies only to the original purchaser of product and is non-transferable. All implied warranties shall be limited in duration to the said 12 month warranty period. Improper use or installation, use for racing, accident, abuse, unauthorized repairs or alterations voids this warranty. AEM disclaims any liability for consequential damages due to breach of any written or implied warranty on all products manufactured by AEM. Warranty returns will only be accepted by AEM when accompanied by a valid Return Merchandise Authorization (RMA) number. Credit for defective products will be issued pending inspection. Product must be received by AEM within 30 days of the date RMA is issued.

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

Grams(G2-0550-0500)550cc Honda/Acura B, D, F, H (exc d17) Fuel Injector Kit

Model: G2-0550-0500   |    Mpn: G2-0550-0500   |    Ean: 0873265009718   |    PartNumber: G2-0550-0500   |   Asin: B00RXGZXXI

Grams Performance is proud to offer the most innovative high-performance fuel injectors for today's performance vehicles.

Features

  • Premium materials, advanced manufacturing techniques, and stringent quality control procedures make Grams Performance the leader in high-performance fuel injectors
  • 11mm Top Hats
  • Each injector set includes dead time compensation values to help ensure consistent air/fuel ratios and optimal performance when tuning; Includes all adapters and wiring necessary
  • High-impedance design (no resistor box required), Linear response across wide range of operating conditions, Ultra-fast solenoids for precise fuel metering
  • All injectors are flow matched sets, Compatible with all known fuels including gasoline, methanol, and ethanol, Unmatched cylinder-to-cylinder consistency and optimal idle quality
  • See more on Amazon...

Brand: Grams   |   Manufacturer: Grams

Item Dimensions: 8 x 8 x 6 inches (20.3 x 20.3 x 15.2 cm)   |   Package Dimensions: 3.35 x 6.1 x 6.22 inches (8.5 x 15.5 x 15.8 cm)

First Available: 2015-01-07

Amazon Price: $286.00 | as of 10/20/2019(6:33pm pst)
Availibility: Usually ships in 24 hours
List Price: $298.88

Warranty: Grams Performance warrants all products to be free from defects in materials and workmanship for normal use and service, regardless of mileage, for a period of time not to exceed 12 months from the original date of retail purchase. Parts returned must be determined by Grams Performance to be defective prior to any warranty credit or replacement is issued.Grams Perfornance's obligation under warranty shall be limited to repairing or replacing, at its discretion, any part proven defective. The customer must prepay transportation charges. Final determination of the suitability of the products for the use contemplated by the buyer is the sole responsibility of the buyer.

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

AEM 25-100BK Black High Volume Fuel Rail

Model: 25-100BK   |    Mpn: 25-100BK   |    Ean: 0840879020019   |    PartNumber: 25-100BK   |   Asin: B002YXGN7K

AEM High Volume fuel rails feature a 1/2-inch fuel bore to support fuel flow for applications up to 1,000 horsepower. This large bore also dampens backpressure pulses created by larger injectors and works perfectly with stock injector sizes. An additional 1/8th NPT port is included to accommodate a nitrous set up or fuel pressure gauge. A custom fuel line fitting is included for the factory fuel line and the ends of each rail are pre tapped to accept -6 AN or 9/16-inch x 18 fittings for users who want to use custom fuel lines.

Features

  • Applications: 94-01 Acura Integra RS, LS, GS and GSR B18
  • O.E. fuel pressure regulator or AEM adjustable fuel pressure regulator mounts directly to rail with no modifications
  • Specifically engineered for each application
  • Comprehensive installation instructions, hardware, fittings and injector O-rings included
  • No additional parts required for installation
  • See more on Amazon...

Brand: AEM   |   Manufacturer: AEM

Package Dimensions: 2.6 x 3.4 x 15.9 inches (6.6 x 8.6 x 40.4 cm)

Amazon Price: $99.99 | as of 10/20/2019(6:33pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $99.99

Warranty: Please note that before we can issue a Returned Merchandise Authorization number (RMA) for AEM Electronics products, it is first necessary for the installer or end user to contact our Electronics tech line at 1-800-423-0046 to discuss the problem. Most issues can be solved over the phone. Under no circumstances should a system be returned or RMA requested before the above process transpires. Advanced Engine Management Inc. warrants to the consumer that all AEM High Performance products will be free from defects in material and workmanship for a period of twelve (12) months from date of the original purchase. Products that fail within this 12 month warranty period will be repaired or replaced at AEM's option, when determined by AEM that the product failed due to defects in material or workmanship. This warranty is limited to the repair or replacement of the AEM part. In no event shall this warranty exceed the original purchase price of the AEM part nor shall AEM be responsible for special, incidental or consequential damages or cost incurred due to the failure of this product. Warranty claims to AEM must be transportation prepaid and accompanied with dated proof of purchase. This warranty applies only to the original purchaser of product and is non-transferable. All implied warranties shall be limited in duration to the said 12 month warranty period. Improper use or installation, use for racing, accident, abuse, unauthorized repairs or alterations voids this warranty. AEM disclaims any liability for consequential damages due to breach of any written or implied warranty on all products manufactured by AEM. Warranty returns will only be accepted by AEM when accompanied by a valid Return Merchandise Authorization (RMA) number. Credit for defective products will be issued pending inspection. Product must be received by AEM within 30 days of the date RMA is issued.

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

Nitrous Express 20927-12 35-75 HP x 2 Sport Compact EFI Dual Stage System with 12 lbs. Composite Bottle

Model: 20927-12   |    Mpn: 2092712   |    Ean: 0653374302555   |    PartNumber: 2092712   |   Asin: B000AUUIOS

Nitrous Express Sport Compact EFI Dual Stage (35-75 horse power x 2) with 12 pounds Composite Bottle is what your looking for if want more horsepower without the hassle and expense of going direct port. NX dual stage nitrous systems are the way to go. Having two stages means you double your power options at the click of a switch. The dual Shark nozzles give adjustability from 50 to 300 wheel horsepower in 25 horse power increments. Systems come complete with stainless bottle bracket, lightning solenoids, extra long stainless braided N2O line, and all necessary hardware to complete the installation.

Features

  • Double your power options at the click of a switch
  • Adjustability from 50 to 300 wheel horsepower in 25 horsepower increments
  • Complete with stainless bottle bracket, Lightning solenoids, extra long stainless braided N2O line and all necessary hardware to complete the installation
  • More horsepower without the hassle and expense of going direct port
  • See more on Amazon...

Brand: Nitrous Express   |   Manufacturer: Nitrous Express

Package Dimensions: 10.2 x 11.3 x 28.1 inches (25.9 x 28.7 x 71.4 cm)

Amazon Price: $1,533.05 | as of 10/20/2019(6:33pm pst)
Availibility: Usually ships in 3-4 business days
List Price: $1,533.05

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

Peterson Fluid Systems 09-0699 600 Series Replacement 100 Micron Element

Model: 09-0699   |    Mpn: 090699   |    Ean: 0013083001437   |    PartNumber: 090699   |   Asin: B003M8VC1S

Peterson 09-0699 REPLACEMENT 100 MICRON.

Features

Brand: Peterson Fluid Systems   |   Manufacturer: Peterson Fluid Systems

Item Dimensions: 24 x 24 x 54 inches (61.0 x 61.0 x 137.2 cm)   |   Package Dimensions: 3.27 x 4.23 x 6.54 inches (8.3 x 10.7 x 16.6 cm)

Amazon Price: $40.57 | as of 10/20/2019(6:33pm pst)
Availibility: Usually ships in 24 hours
List Price: $51.17

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

NOS 14745NOS Electric Blue 10-pound Aluminum Nitrous Bottle with Hi-Flow Valve

Model: 14745NOS   |    Mpn: 14745NOS   |    Ean: 0090127500149   |    PartNumber: 14745NOS   |   Asin: B000COXD3K

This NOS powder coated electric blue bottle is a dot-approved nitrous bottle with hi-flow valve. The bottles valve is NOS/CGA-approved and features a built-in siphon tube. For extra safety, NOS has designed an exclusive blow-off venting system. If your bottle is overfilled or if pressure increases beyond the maximum safety level, the vent opens and discharges the nitrous into a safe place. This bottle weights 14 pounds, 12 ounces empty, and 24 pounds 12 ounces full.

Features

  • Bottle is 21" long by 7" in diameter
  • Distinctive electric blue finish for a custom look
  • Made from aluminum for optimum weight reduction
  • 90-day limited warranty
  • Outlet is 1 1/4 male threads
  • See more on Amazon...

Brand: NOS/Nitrous Oxide System   |   Manufacturer: NOS/Nitrous Oxide System

Package Dimensions: 7.2 x 7.5 x 23.9 inches (18.3 x 19.1 x 60.7 cm)

First Available: 2006-11-29

Amazon Price: $263.95 | as of 10/20/2019(6:33pm pst)
Availibility: Usually ships in 24 hours
List Price: $263.95

Warranty: 90 Days

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

ACCEL 150824 Performance Fuel Injector

Model: ACC 150824   |    Mpn: ACC 150824   |    Ean: 0743047800348   |    PartNumber: ACC 150824   |   Asin: B001DUEITK

ACCEL 24-pound-per-hour High Impedance Performance fuel injectors maintain precise control of fuel delivery and atomization for more power, better throttle response, and improved fuel economy. The special EV1 design is compatible with gas, E85 or methanol, and each one is all-new not a modified stock injector and not remanufactured from a used core. A new, low-mass disc design creates a spray pattern for ultra-fine atomization and ensures accurate metering control even at ultra-low and ultra-high duty cycles. These injectors operate at higher fuel pressures without any loss of metering control and are perfect for use with superchargers, where more fuel pressure and precise metering are an absolute must. Modern manufacturing processes reduce flow deviation between injectors, and both low- and high-impedance designs are available to match your vehicle's ECU. These ready-to-install injectors come complete with fine-mesh fuel strainers and precision-molded O-rings.

Features

  • Maintains precise control of fuel delivery and atomization for more power better throttle response and improved fuel economy
  • Special EV1 design is compatible with gas E85 or methanol
  • All new not a modified stock injector and not remanufactured from a used core
  • Ultra fine atomization and accurate metering control
  • Flows 24 pounds per hour
  • See more on Amazon...

Brand: ACCEL   |   Manufacturer: ACCEL

Package Dimensions: 1.6 x 5 x 8.1 inches (4.1 x 12.7 x 20.6 cm)

First Available: 2012-10-23

Amazon Price: $318.95 | as of 10/20/2019(6:33pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $318.95

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

COMP Cams Fuel Rail Adapter Kit

Model: 146025-KIT   |    Mpn: 146025-KIT   |    Ean: 0036584209294   |    PartNumber: 146025-KIT   |   Asin: B004QOD8PU

Competition Cams a trusted industry leader. Backed by manufacturer's warranty. Designed for good performance.

Features

  • Competition Cams a trusted industry leader
  • Backed by manufacturer's warranty
  • Designed for good performance
  • See more on Amazon...

Brand: FAST   |   Manufacturer: COMP Cams

Item Dimensions: 2 x 4 x 7 inches (5.1 x 10.2 x 17.8 cm)   |   Package Dimensions: 2.5 x 3.4 x 6.2 inches (6.4 x 8.6 x 15.7 cm)

First Available: 2016-11-29

Amazon Price: $20.51 | as of 10/20/2019(6:33pm pst)
Availibility: Usually ships in 24 hours
List Price: $37.49

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

ACCEL 150836 Performance Fuel Injector

Model: ACC 150836   |    Mpn: ACC 150836   |    Ean: 0084829800386   |    PartNumber: ACC 150836   |   Asin: B0006HJOCM

ACCEL 36-pound-per-hour High Impedance Performance fuel injectors maintain precise control of fuel delivery and atomization for more power, better throttle response, and improved fuel economy. The special EV1 design is compatible with gas, E85 or methanol, and each one is all-new not a modified stock injector and not remanufactured from a used core. A new, low-mass disc design creates a spray pattern for ultra-fine atomization and ensures accurate metering control even at ultra-low and ultra-high duty cycles. These injectors operate at higher fuel pressures without any loss of metering control and are perfect for use with superchargers, where more fuel pressure and precise metering are an absolute must. Modern manufacturing processes reduce flow deviation between injectors, and both low- and high-impedance designs are available to match your vehicle's ECU. These ready-to-install injectors come complete with fine-mesh fuel strainers and precision-molded O-rings.

Features

  • Maintains precise control of fuel delivery and atomization for more power better throttle response and improved fuel economy
  • Special EV1 design is compatible with gas E85 or methanol
  • All new not a modified stock injector and not remanufactured from a used core
  • Ultra fine atomization and accurate metering control
  • Flows 36 pounds per hour
  • See more on Amazon...

Brand: ACCEL   |   Manufacturer: ACCEL

Package Dimensions: 1.6 x 5.1 x 8.2 inches (4.1 x 13.0 x 20.8 cm)

Amazon Price: $345.95 | as of 10/20/2019(6:33pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $345.95

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #20

Canton Racing 26-600 Fuel Filter Element (CM-15 for Short 1 Micron)

Model: 26-600   |    Mpn: 26-600   |    PartNumber: 26-600   |   Asin: B01C8IBNTI

Single 2-5/8" tall 1 micron fuel element for our 4" and Marine fuel filters. Canton Racing Products has been building oil pans and engine related products for racing and high performance applications since 1981.

Features

  • 2-5/8" tall 1-micron fuel element for our 4" fuel filters
  • Made in the USA
  • 1-Micron filtration
  • See more on Amazon...

Brand: Canton Racing Products   |   Manufacturer: Canton Racing

Item Dimensions: 6 x 6 x 6 inches (15.2 x 15.2 x 15.2 cm)   |   Package Dimensions: 0.2 x 7.44 x 8.15 inches (0.5 x 18.9 x 20.7 cm)

First Available: 2016-02-26

Amazon Price: $12.00 | as of 10/20/2019(6:33pm pst)
Availibility: Usually ships in 24 hours
List Price: $14.40

Warranty: 90-Day Limited Warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #21

Painless 60131 Fuel Injector Kit

Model: 60131   |    Mpn: 60131   |    Ean: 0749823601314   |    PartNumber: 60131   |   Asin: B004PL6HOI

Need to convert or repair your existing multi-port fuel injection harness to use EV6/USCar style injectors? EV6/USCar style injectors have several different appearances to them; however, they all utilize the same harness connector. If you need to repair crushed or broken connectors on your factory harness or are converting over to the EV6/USCar injectors that can be found on modern multi port fuel injection systems, Painless now offers this repair/change over kit. The kit contains the necessary terminals, seals, terminal locks, and connectors to fit 8 injectors.

Features

  • Painless Wiring 60131 EV6/USCAR Fuel Injector Connector Kit; Incl. Terminals; Seals; Terminal Locks; Connectors For 8 Injectors;
  • Authorized Dealer - 100% Satisfaction Guaranteed
  • Painless Wiring
  • 60131
  • Warranty: Yes
  • See more on Amazon...

Brand: Painless   |   Manufacturer: Painless Wiring

Item Dimensions: 8 x 2 x 4.75 inches (20.3 x 5.1 x 12.1 cm)   |   Package Dimensions: 1.8 x 5 x 8 inches (4.6 x 12.7 x 20.3 cm)

Amazon Price: $40.43 | as of 10/20/2019(6:33pm pst)
Availibility: Usually ships in 24 hours
List Price: $40.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #22

FAST 30572-8 Precision-Flow 57 lb/hr 598.5cc/min High-Impedance Fuel Injector for LS2, (Set of 8)

Model: 30572-8   |    Mpn: 30572-8   |    Ean: 0036584171348   |    PartNumber: 30572-8   |   Asin: B002EDYNVS

The FAST Precision-Flow Fuel Injectors for GM Gen IV engines are the highest flowing injectors available and are uniquely designed for direct installation into LS2 and LS3/LS7 style engines. Available in 2 different height configurations and a wide range of flow rates, the injectors are correctly sized (shorter than common LS1/LS6 injectors) and feature the correct EV6/USCAR connector, enabling a hassle-free plug-in operation.

Features

  • 57 pounds/hour (598.5cc/min) injector
  • LS2 type high impedance injectors
  • Highest flowing injectors available
  • Shorter than common LS1/LS6 injectors
  • Hassle free plug-in operation
  • See more on Amazon...

Brand: FAST   |   Manufacturer: FAST

Item Dimensions: 3 x 3 x 8.75 inches (7.6 x 7.6 x 22.2 cm)   |   Package Dimensions: 2.6 x 2.7 x 9 inches (6.6 x 6.9 x 22.9 cm)

First Available: 2012-09-04

Amazon Price: $389.99 | as of 10/20/2019(6:33pm pst)
Availibility: Usually ships in 3-4 business days
List Price: $390.99

Warranty: 1 Year Limited

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #23

NOS 15974NOS Mini 2-Stage Progressive Nitrous Controller

Model: 15974NOS   |    Mpn: 15974NOS   |    Ean: 0090127631348   |    PartNumber: 15974NOS   |   Asin: B000LWID7Y

Nitrous Oxide Systems is proud to announce their new Mini 2 Stage Progressive nitrous controller. Featuring two completely independent stages of nitrous control, each with its own throttle position activation switch and progressive ramps. It allows you to get the most out of your nitrous system and put more power to the ground when traction is at its best. RPM on/off control eliminates the need for a window switch and allows you to turn the nitrous off and on at set points. It also features two programmable outputs, so you can control timing retard or other devices. With the hand held programmer, it makes programming quick and simple and allows you to mount the main box out of site.

Features

Brand: NOS/Nitrous Oxide System   |   Manufacturer: NOS/Nitrous Oxide System

Package Dimensions: 3.3 x 5.3 x 8 inches (8.4 x 13.5 x 20.3 cm)

First Available: 2006-11-29

Amazon Price: $289.75 | as of 10/20/2019(6:33pm pst)
Availibility: Usually ships in 24 hours
List Price: $289.85

Warranty: 90 Days

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #24

Professional Products 10614 Complete Fuel Rail Kit for LS2

Model: 10614   |    Mpn: 10614   |    Ean: 0665053106149   |    PartNumber: 10614   |   Asin: B003IGFQHA

Professional Products Complete Fuel Rail Kit for LS2 features the complete kit that includes all the parts from the basic kits plus a stainless braided -6 AN fuel crossover hose, and additional fittings.

Features

  • Red anodized finish
  • Stainless crossover hose
  • Stainless mounting hardware
  • Stock fuel line connector fittings included
  • See more on Amazon...

Brand: Professional Products   |   Manufacturer: Professional Products

Item Dimensions: 2.5 x 18 x 9.5 inches (6.4 x 45.7 x 24.1 cm)   |   Package Dimensions: 2.8 x 9.5 x 17.6 inches (7.1 x 24.1 x 44.7 cm)

First Available: 2012-05-31

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



´╗┐
Looking For Something Else? Search

Most Popular
New Releases

  1. AEM 25-100BK Black High Volume Fuel Rail
  2. ACCEL 150836 Performance Fuel Injector
  3. AEM 30-3003 Water/Methanol Injection Filter
  4. AEM 30-3350 AEM30-3350
  5. Canton Racing 26-600 Fuel Filter Element (CM-15 for Short 1 Micron)
  6. NOS 14745NOS Electric Blue 10-pound Aluminum Nitrous Bottle with Hi-Flow Valve
  7. Painless 60131 Fuel Injector Kit
  8. FAST 30572-8 Precision-Flow 57 lb/hr 598.5cc/min High-Impedance Fuel Injector for LS2, (Set of 8)
  9. NOS 15974NOS Mini 2-Stage Progressive Nitrous Controller
  10. Professional Products 10614 Complete Fuel Rail Kit for LS2

Most Wished For

  1. AEM 25-104BK Black High Volume Fuel Rail
  2. Ford Racing (M-9593-LU24A) Hi-Flow Fuel Injector Kit, (Pack of 8)
  3. Grams(G2-0550-0500)550cc Honda/Acura B, D, F, H (exc d17) Fuel Injector Kit
  4. AEM 25-100BK Black High Volume Fuel Rail
  5. Nitrous Express 20927-12 35-75 HP x 2 Sport Compact EFI Dual Stage System with 12 lbs. Composite Bot...
  6. Peterson Fluid Systems 09-0699 600 Series Replacement 100 Micron Element
  7. NOS 14745NOS Electric Blue 10-pound Aluminum Nitrous Bottle with Hi-Flow Valve
  8. AEM 30-3003 Water/Methanol Injection Filter
  9. ACCEL 150824 Performance Fuel Injector
  10. COMP Cams Fuel Rail Adapter Kit

Most Gifted

  1. AEM 25-100BK Black High Volume Fuel Rail
  2. ACCEL 150836 Performance Fuel Injector
  3. AEM 30-3003 Water/Methanol Injection Filter
  4. AEM 30-3350 AEM30-3350
  5. Canton Racing 26-600 Fuel Filter Element (CM-15 for Short 1 Micron)
  6. NOS 14745NOS Electric Blue 10-pound Aluminum Nitrous Bottle with Hi-Flow Valve
  7. Painless 60131 Fuel Injector Kit
  8. FAST 30572-8 Precision-Flow 57 lb/hr 598.5cc/min High-Impedance Fuel Injector for LS2, (Set of 8)
  9. NOS 15974NOS Mini 2-Stage Progressive Nitrous Controller
  10. Professional Products 10614 Complete Fuel Rail Kit for LS2

Top Selling

  1. AEM 30-3003 Water/Methanol Injection Filter
  2. MagnaFuel MP-4550-SK Seal Kit for QuickStar 275
  3. AEM 30-3350 AEM30-3350
  4. Holley 534-102 LT1 Style Fuel Injector Retainer
  5. MagnaFuel MP-4501-SK Seal Kit for QuickStar 275/300
  6. AEM 2-777 Injector Bung Kit
  7. MagnaFuel MP-1025 Single Relay Harness
  8. Aeromotive 12604 Replacement Filter Element, 100-Micron Stainless Mesh, Fits All 2" OD Filter Housin...
  9. Ford Racing (M-9593-LU24A) Hi-Flow Fuel Injector Kit, (Pack of 8)
  10. MSD 2922 Atomic Fuel Return Kit



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Care & Cleaning


Electronics


Exterior Accessories


Interior Accessories


Lights


Oils & Fluids


Tires & Wheels


Tools & Equipment


Performance Parts


Rv Parts


Motorcycle & Powersports


Replacement Parts