Frontpage > Car & Automotive > Performance Parts > Main Bolts & Studs

Best Main Bolts & Studs - Buying Guide

Last Updated: 11/20/2018

Share on


  #1

ARP 250-4202 Stud Kit

Model: 250-4202   |    Mpn: 2504202   |    Ean: 0672036032456   |    PartNumber: 2504202   |   Asin: B001D0MJLO

It is for good reason that virtually every top professional engine builder relies on ARP Pro Series head studs for their all out competition power plants. Simply stated, there's not a better stud setup on the market today. For openers, ARP uses a premium grade 8740 alloy that is rated far superior to "aircraft" quality. Each stud is placed vertically in special racks and precisely heat treated to 200,000 PSI. Following heat treat, each stud is centerless ground to make it as close to perfectly concentric as possible. It's important to note that lesser quality studs are not even centerless ground, the material is thread rolled in bar stock form. Because ARP studs are manufactured to such exacting tolerances, you will note that gaskets and cylinder heads literally glide into position and are perfectly aligned, something that won't happen with inferior quality head studs. ARP studs are thread rolled after heat treat, which gives them about 1000 Percent (that's ten times) better fatigue strength than those studs that are threaded prior to heat treat. It costs a lot more to do it this way, because it's tough on tooling, but the results are well worth the extra effort. You will also note that ARP offers specially undercut studs for several engines. This procedure (done only to the shorter studs) more equalizes the "stretch" of both studs, which makes for a more consistent clamping force and one that compensates for head gasket compression when the cylinder heads are installed. This helps prevent blown head gaskets, and assures optimum engine sealing! Premium quality heat treated 8740 chrome moly steel head stud kits are available for most every domestic and import applications. You won't find a better quality stud on the market from any other source. Look for ARP stamped on each stud as your assurance of quality. Clearly, they are the best on the market today, and the favorite of leading professional engine builders in all forms of racing.

Features

  • Chrome Moly ARP2000
  • Stud Is Placed Vertically In Special Racks And Precisely Heat Treated To 220,000 PSI
  • Thread Rolled After Heat Treat, Which Gives Them About Ten Times Better Fatigue Strength Than Those Studs That Are Threaded Prior To Heat Treat
  • Centerless Ground To Make It As Close To Perfectly Concentric As Possible
  • Uses A Premium Grade 8740 Alloy That Is Rated Far Superior To Aircraft Quality
  • See more on Amazon...

Brand: ARP   |   Manufacturer: ARP

Item Dimensions: 2.3 x 7.3 x 11 inches (5.8 x 18.5 x 27.9 cm)   |   Package Dimensions: 2.24 x 7.24 x 10.98 inches (5.7 x 18.4 x 27.9 cm)

First Available: 2012-06-05

Amazon Price: Too low to display | as of 11/20/2018(11:49pm pst)
Availibility: Usually ships in 24 hours
List Price: $419.90

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

ARP 150-3102 Black Oxide Hex Motor Mount Bolt Kit

Model: 150-3102   |    Mpn: 1503102   |    Ean: 0672036003197   |    PartNumber: 1503102   |   Asin: B000CFU562

To maintain a reputation for "zero defects", ensure optimum quality control, and produce fasteners of exceptionally high quality, ARP controls all aspects of the manufacturing process, performing all operations in-house where they can be closely monitored. This motor mount bolt kit is a good example of how ARP takes extraordinary steps to produce the very finest products of their kind on the market today. These bolts are manufactured from black oxide finished chrome moly steel, which is rated at 170,000 psi. They feature conventional hex style heads, come complete with high quality flat washers, and will help you secure your engine with complete confidence.

Features

  • Add ARP's legendary quality to secure your engine with complete confidence
  • Manufactured from black oxide finished chrome moly steel
  • Rated at 170,000 PSI, which is considerably stronger than Grade 8 hardware
  • Bolts feature conventional hex style heads
  • Kit comes complete with high quality flat washers
  • See more on Amazon...

Brand: ARP   |   Manufacturer: ARP

Package Dimensions: 1 x 3.6 x 5.5 inches (2.5 x 9.1 x 14.0 cm)

First Available: 2012-06-05

Amazon Price: $8.99 | as of 11/20/2018(11:49pm pst)
Availibility: Usually ships in 24 hours
List Price: $17.31

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

ARP 1007703 Wheel Studs - Pack of 5

Model: 1007703   |    Mpn: 1007703   |    Ean: 0672036000417   |    PartNumber: 1007703   |   Asin: B000CFO0KO

Automotive Racing Products 100-7703 Ford Rear Disc Brakes/Chrys

Features

Brand: ARP   |   Manufacturer: ARP

Item Dimensions: 1 x 5 x 7 inches (2.5 x 12.7 x 17.8 cm)   |   Package Dimensions: 0.98 x 3.31 x 4.29 inches (2.5 x 8.4 x 10.9 cm)

First Available: 2012-06-05

Amazon Price: $23.59 | as of 11/20/2018(11:49pm pst)
Availibility: Usually ships in 24 hours
List Price: $23.84

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

ARP 2604701 Bolt Kit

Model: 2604701   |    Mpn: 2604701   |    Ean: 0672036022822   |    PartNumber: 2604701   |   Asin: B001D0MJKU

Subaru EJ2.0L & 2.5L DOHC head stud kitIncludes 12-point nuts

Features

  • Fits SUBARU 2.5L/2458cc-1998-1999/2004-2009/2004-2008;2.0L/1994cc 2002-2005;2.2L/2212cc -1999-2001
  • See more on Amazon...

Brand: ARP   |   Manufacturer: ARP

Item Dimensions: 9 x 3 x 4 inches (22.9 x 7.6 x 10.2 cm)   |   Package Dimensions: 2.3 x 4.2 x 8.8 inches (5.8 x 10.7 x 22.4 cm)

First Available: 2012-06-05

Amazon Price: $185.99 | as of 11/20/2018(11:49pm pst)
Availibility: Usually ships in 24 hours
List Price: $185.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

ARP 230-7003 2307003 Oil Pump Stud Kit

Model: 230-7003   |    Mpn: 2307003   |    Ean: 0672036008390   |    PartNumber: 2307003   |   Asin: B000CFO310

You've probably heard many a horror story about someone losing an engine when the oil pump fell off into the pan because of a broken bolt. Well, you can put your mind at ease when using ARP's premium grade oil pump bolt and stud kits. You have a choice of black oxide finished 8740 chrome moly steel or low maintenance stainless steel. Both are nominally rated at 170,000 PSI tensile strength to provide you with plenty of clamping force. Moreover, take your pick between conventional hex style or 12 point designs. This is "insurance" that no conscientious engine builder should be without! The studs come with flat washers and nuts, while the Ford bolt kit has flat washers only. These inexpensive fasteners can literally save your engine.

Features

  • Made From Premium Grade 8740 Alloy Chrome Moly Steel
  • With Hex Nut and Washer
  • Nominally Rated At 180,000 PSI Tensile Strength To Provide You With Plenty Of Clamping Force
  • 3.125 in
  • High Volume
  • See more on Amazon...

Brand: ARP   |   Manufacturer: ARP

Item Dimensions: 0.5 x 3.5 x 5.4 inches (1.3 x 8.9 x 13.7 cm)   |   Package Dimensions: 0.5 x 3.3 x 5.5 inches (1.3 x 8.4 x 14.0 cm)

First Available: 2012-06-05

Amazon Price: $8.16 | as of 11/20/2018(11:49pm pst)
Availibility: Usually ships in 24 hours
List Price: $12.98

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

ARP 218-5402 Main Stud Kit

Model: 218-5402   |    Mpn: 218-5402   |    Ean: 0672036029050   |    PartNumber: 218-5402   |   Asin: B001T6HDXG

ARP Main Stud/Bolt Kits - - MAZDA 3 BASE;MAZDASPEED;S;SP23 MZR;N/A L4 ; - MAZDA 5 ALL ALL ALL ; - MAZDA 6 BASE;I;MAZDASPEED MZR;N/A L4 ; - 218-5402 *Main Studs* There are many important reasons to use ARP main stud kits, including the elimination of main cap walk and fretting, as well as protecting the threads in your engine block. All kits come complete with hardened parallel-ground washers and high quality nuts. Some applications have provisions for mounting windage trays and have specially designed standoff studs with serrated lock nuts to position the windage tray and lock it securely in place. The studs are manufactured from 8740 chrome moly steel, heat-treated in-house to 200,000 psi tensile strength, and precision J-form threads rolled after heat-treat to create a fastener that has threads 1000% stronger than others. *Main Bolts* Far superior to any other main bolt kit offered for use in competition engines, ARP main bolts are designed to meet the exacting standards and demands of professional engine builders. Forged from 8740 chrome moly, all bolts feature generous under-head radius and rolled threads for the utmost reliability. The threads are rolled after heat-treating, which makes them about 1000% longer fatigue life than most main bolts, which are threaded prior to heat-treating. Available in the popular High Performance Series, which, at a nominal rating of 180,000 psi, is a premium replacement for OEM fasteners, or the 200,000 psi nominal rated Pro Series, application-specific main bolts with reduced wrenching head and are designed for use in competition applications. Parallel-ground, hardened washers are included with each kit.

Features

Brand: ARP   |   Manufacturer: ARP

Package Dimensions: 2.4 x 4.2 x 8.7 inches (6.1 x 10.7 x 22.1 cm)

Amazon Price: $104.99 | as of 11/20/2018(11:49pm pst)
Availibility: Usually ships in 24 hours
List Price: $104.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

ARP 2442901 Pro Series Flexplate Bolt Kit for Gen II/LS Series Small Block Chevrolet

Model: 2442901   |    Mpn: 2442901   |    Ean: 0672036035105   |    PartNumber: 2442901   |   Asin: B003XUH4QM

Chevy Gen II/LS Series Small Block, .880 Under Head Length, M11 x 1.5 Thread Size, Pro Series ARP Flexplate Bolt Kit 244-2901ARP Flexplate bolts play an important role in the performance and safety of race cars and street machines alike. Thats why the fastener experts at ARP have developed special bolts that are far superior to OEM hardware. ARP offers two styles of ARP Flexplate bolts bolts: High Performance and Pro Series.Both ARP Flexplate bolts are forged from aerospace alloy and heat-treated prior to thread rolling and machining. Both feature an exclusive, flat, 12-point head design and larger than stock shank diameter for increased strength nd improved Flexplate register.The popular ARP High Performance series is rated at 180,000 psi, and the premium grade ARP Pro Series, originally developed for NASCAR Winston Cup competition, has a 200,000 psi rating. Complete with washers and nuts where applicable.NOTE: The thread size of metric fasteners is listed using international designations. For example, M10 indicates a 10mm thread size.

Features

Brand: ARP   |   Manufacturer: ARP

Item Dimensions: 0.87 x 4 x 6 inches (2.2 x 10.2 x 15.2 cm)   |   Package Dimensions: 0.24 x 5.98 x 10 inches (0.6 x 15.2 x 25.4 cm)

First Available: 2012-06-05

Amazon Price: $23.99 | as of 11/20/2018(11:49pm pst)
Availibility: Usually ships in 24 hours
List Price: $30.89

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

ARP 142-4001 6-Point Head Stud Kit

Model: 142-4001   |    Mpn: ARP-142-4001   |    Ean: 0672036022242   |    PartNumber: ARP-142-4001   |   Asin: B001T6EKNC

It is for good reason that virtually every top professional engine builder relies on ARP Pro Series head studs for their all-out competition powerplants. Simply stated, there's not a better stud setup on the market today. For openers, ARP uses a premium grade 8740 alloy that is rated far superior to "aircraft" quality. Then, each stud is placed vertically in special racks and precisely heat-treated to 200,000 psi. This procedure ensures complete heat penetration and the results are far superior to those lesser quality studs from other manufacturers who just dump pieces in a basket and hope for the best. Following heat-treat, each stud is centerless ground to make it as close to perfectly concentric as possible. This procedure involves about ten very slight cuts and results in an exceptionally straight part. It's important to note that lesser quality studs are not even centerless ground - the material is thread rolled in bar stock form (mostly before heat-treat, when the material is easier to machine). Because ARP studs are manufactured to such exacting tolerances, you will note that gaskets and cylinder heads literally glide into position and are perfectly aligned - something that won't happen with inferior quality head studs. ARP studs are thread rolled after heat-treat, which gives them about 1000% (that's ten times) better fatigue strength than those studs that are threaded prior to heat-treat (a very common industry practice). It costs a lot more to do it this way, because it's tough on tooling, but the results are well worth the extra effort. You will also note that ARP offers specially undercut studs for several engines. This procedure (done only to the shorter studs) more equalizes the "stretch" of both studs, which makes for a more consistent clamping force - and one that compensates for head gasket compression when the cylinder heads are installed. This helps prevent blown head gaskets, and assures optimum engine sealing! Premium quality

Features

Brand: ARP   |   Manufacturer: ARP

Package Dimensions: 3 x 5 x 9 inches (7.6 x 12.7 x 22.9 cm)

First Available: 2012-10-25

Amazon Price: $92.14 | as of 11/20/2018(11:49pm pst)
Availibility: Usually ships in 1 to 3 months
List Price: $92.14

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

ARP 156-1001 Camshaft Tower Stud Kit for Ford 3V Modular

Model: 156-1001   |    Mpn: ARP-156-1001   |    Ean: 0672036040215   |    PartNumber: ARP-156-1001   |   Asin: B006ZLFT5E

ARP Cam Bolt Kits - - FORD EXPEDITION ALL ALL V8 ; - FORD F-150 ALL ALL V8 ; - FORD F-250 SUPER DUTY ALL ALL V8 ; - FORD F-350 SUPER DUTY ALL ALL V8 ; - FORD MUSTANG GT; SHELBY GT; BULLITT ALL V8 ; - LINCOLN NAVIGATOR ALL ALL V8 ; - 156-1001 Install an ARP cam bolt kit and end your camshaft timing worries! ARP quality delivers increased pre-load clamping force and assures positive timing gear register. Includes appropriate fasteners for your application. Increased material strength overcomes valve train harmonics and stress. Added features include oversized bolt head flange for cam button retention and reduced socket head size to facilitate easy installation and removal. Available in both High Performance and Pro Series kits.

Features

Brand: ARP   |   Manufacturer: ARP

Package Dimensions: 0.55 x 5.71 x 9.61 inches (1.4 x 14.5 x 24.4 cm)

First Available: 2012-10-25

Amazon Price: $166.41 | as of 11/20/2018(11:49pm pst)
Availibility: Usually ships in 24 hours
List Price: $166.41

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

ARP 2345606 Main Stud Kit, 200,000 PSI Chrome Moly Steel, For Select Chevrolet Small Block 4-Bolt Main Applications, 400, With Windage Tray

Model: 234-5606   |    Mpn: 2345606   |    Ean: 0672036009557   |    PartNumber: 2345606   |   Asin: B000CFU7HO

There are many important reasons to use ARP main stud kits, including the elimination of main cap walk and fretting, as well as protecting the threads in your engine block. The studs are manufactured in their own factory using the best processes, designs, materials, and engineering. Every main stud kit exceeds the most stringent aerospace specifications, and come complete with hardened parallel-ground washers and aerospace quality nuts. The studs are manufactured from 8740 chrome moly steel, and heat-treated to 200,000 psi tensile strength. J-form threads are rolled after heat-treat to create a fastener that has threads 1000% stronger than others. Be aware that, although ARP produces both studs and bolts, they recommend the use of main studs over bolts whenever possible for several key reasons. First is the ability to obtain more accurate torque readings because studs don't "twist" into the block. All clamping forces are on one axis. By the same token, there is less force exerted on the block threads, which contributes to improved block life (which is very critical on aluminum blocks). They also allow for easier engine assembly and proper alignment of caps every time.

Features

  • Main studs are designed to meet the exacting standards and demands of professional engine builders
  • Manufactured from 8740 chrome moly steel
  • Rated at 200,000 PSI, which is considerably stronger than Grade 8 hardware
  • Rolled J-form threads are 1000% stronger than other threads
  • Main studs are recommended over main bolts for a number of reasons, including more accurate torque readings and easier engine assembly
  • See more on Amazon...

Brand: ARP   |   Manufacturer: ARP

Package Dimensions: 2.25 x 4.25 x 8.75 inches (5.7 x 10.8 x 22.2 cm)

First Available: 2012-06-05

Amazon Price: $129.99 | as of 11/20/2018(11:49pm pst)
Availibility: Usually ships in 24 hours
List Price: $129.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

ARP 2307001 Oil Pump Studs

Model: 2307001   |    Mpn: 2307001   |    Ean: 0672036008376   |    PartNumber: 2307001   |   Asin: B000CFQ5QG

You've probably heard many a horror story about someone losing an engine when the oil pump fell off into the pan because of a broken bolt. Well, you can put your mind at ease when using ARP's premium grade oil pump bolt and stud kits. You have a choice of black oxide finished 8740 chrome moly steel or low maintenance stainless steel. Both are nominally rated at 170,000 PSI tensile strength to provide you with plenty of clamping force. Moreover, take your pick between conventional hex style or 12 point designs. This is "insurance" that no conscientious engine builder should be without! The studs come with flat washers and nuts, while the Ford bolt kit has flat washers only. These inexpensive fasteners can literally save your engine.

Features

  • Made From Premium Grade 8740 Alloy Chrome Moly Steel
  • With Hex Nut and Washer
  • Nominally Rated At 180,000 PSI Tensile Strength To Provide You With Plenty Of Clamping Force
  • See more on Amazon...

Brand: ARP   |   Manufacturer: ARP

Item Dimensions: 0.5 x 4 x 5.8 inches (1.3 x 10.2 x 14.7 cm)   |   Package Dimensions: 0.5 x 4 x 5.7 inches (1.3 x 10.2 x 14.5 cm)

First Available: 2012-06-05

Amazon Price: $4.99 | as of 11/20/2018(11:49pm pst)
Availibility: Usually ships in 24 hours
List Price: $9.41

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

ARP 2025402 Stud Kit

Model: 202-5402   |    Mpn: 2025402   |    Ean: 0672036034283   |    PartNumber: 2025402   |   Asin: B001D0J5DE

ARP Main Stud/Bolt Kits - - NISSAN 180SX S13 SR20DET L4 ; - NISSAN 240SX ALL ALL ALL ; - NISSAN BLUEBIRD U12;U13 SR20DET L4 ; - NISSAN SILVIA S13;S14;S15 SR20DET L4 ; - 202-5402 *Main Studs* There are many important reasons to use ARP main stud kits, including the elimination of main cap walk and fretting, as well as protecting the threads in your engine block. All kits come complete with hardened parallel-ground washers and high quality nuts. Some applications have provisions for mounting windage trays and have specially designed standoff studs with serrated lock nuts to position the windage tray and lock it securely in place. The studs are manufactured from 8740 chrome moly steel, heat-treated in-house to 200,000 psi tensile strength, and precision J-form threads rolled after heat-treat to create a fastener that has threads 1000% stronger than others. *Main Bolts* Far superior to any other main bolt kit offered for use in competition engines, ARP main bolts are designed to meet the exacting standards and demands of professional engine builders. Forged from 8740 chrome moly, all bolts feature generous under-head radius and rolled threads for the utmost reliability. The threads are rolled after heat-treating, which makes them about 1000% longer fatigue life than most main bolts, which are threaded prior to heat-treating. Available in the popular High Performance Series, which, at a nominal rating of 180,000 psi, is a premium replacement for OEM fasteners, or the 200,000 psi nominal rated Pro Series, application-specific main bolts with reduced wrenching head and are designed for use in competition applications. Parallel-ground, hardened washers are included with each kit. *****NOTE: NOT USED for BOLTING DOWN CYLINDER HEAD*****

Features

  • ARP Main Stud/Bolt Kits
  • Used for Bolting the Crankshaft Main caps in place
  • *****NOTE: NOT USED for BOLTING DOWN CYLINDER HEAD*****
  • See more on Amazon...

Brand: ARP   |   Manufacturer: ARP

Item Dimensions: 9 x 3 x 4 inches (22.9 x 7.6 x 10.2 cm)   |   Package Dimensions: 2.1 x 4.2 x 8.5 inches (5.3 x 10.7 x 21.6 cm)

First Available: 2012-06-05

Amazon Price: $106.99 | as of 11/20/2018(11:49pm pst)
Availibility: Usually ships in 24 hours
List Price: $107.28

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

ARP 151-5406 Main Stud Kit for Ford 2.0L Zetec

Model: 151-5406   |    Mpn: 151-5406   |    Ean: 0672036036393   |    PartNumber: 151-5406   |   Asin: B001T6HDIG

ARP 151-5406

Brand: ARP   |   Manufacturer: ARP

Item Dimensions: 9 x 3 x 4 inches (22.9 x 7.6 x 10.2 cm)   |   Package Dimensions: 2.24 x 4.45 x 8.78 inches (5.7 x 11.3 x 22.3 cm)

First Available: 2012-10-25

Amazon Price: $82.28 | as of 11/20/2018(11:49pm pst)
Availibility: Usually ships in 24 hours
List Price: $82.28

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

ARP 234-4319 12-Point Head Stud Kit for Small Block Chevy

Model: 234-4319   |    Mpn: 234-4319   |    Ean: 0672036035693   |    PartNumber: 234-4319   |   Asin: B003TPOFT0

SB Chevy GENIII LSX 12pt Head Stud Kit

Features

Brand: ARP   |   Manufacturer: ARP

Package Dimensions: 2.3 x 4.2 x 8.7 inches (5.8 x 10.7 x 22.1 cm)

First Available: 2012-10-25

Amazon Price: $350.61 | as of 11/20/2018(11:49pm pst)
Availibility: Usually ships in 24 hours
List Price: $369.06

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

ARP 5949601 Stainless 300 Hex Engine & Fastener Kit

Model: 594-9601   |    Mpn: 5949601   |    Ean: 0672036015527   |    PartNumber: 5949601   |   Asin: B000CFQ9X0

It's easy to assemble a show-quality engine when you use ARP's handy Engine And Accessory Fastener Kit. Virtually everything you need comes completely organized in one convenient package, so there is no need to deal with twelve different part numbers. More importantly, each and every fastener is superior in strength to the OEM bolts, and also significantly better than hardware grades, even Grade 8. Those who desire a dazzling engine will no doubt prefer fasteners made of ARP's specially alloyed Stainless 300 material, which has the added benefit of being virtually impervious to rust and corrosion. The stainless steel is polished to achieve a brilliant luster, and provides a distinctive, maintenance-free environment. Each kit has a dozen different type fasteners with traditional hex style heads, all neatly organized and labeled in protective vacuum-wrapped packages, including: intake manifold bolts, valve cover bolts, thermostat housing bolts, alternator bracket bolts, distributor bracket bolts, motor mount bolts, oil pan bolts, coil bracket bolts, header bolts, front cover bolts, water pump bolts, and fuel pump bolts. Please note that these kits are designed for carbureted engines, so newer EFI applications, or those with aftermarket components, may require the purchase of additional fasteners.

Features

  • Contains 12 groups of fasteners, virtually everything you need to assemble a show-quality carbureted engine
  • All neatly organized and labeled in protective vacuum-wrapped packages
  • Manufactured from polished Stainless 300 steel, a proprietary alloy that is impervious to rust and corrosion
  • Heads are traditional hex style, and premium-quality washers are included
  • Rated at 170,000 PSI, which is considerably stronger than Grade 8 hardware
  • See more on Amazon...

Brand: ARP   |   Manufacturer: ARP

Item Dimensions: 9 x 3 x 9 inches (22.9 x 7.6 x 22.9 cm)   |   Package Dimensions: 2.2 x 8.3 x 8.7 inches (5.6 x 21.1 x 22.1 cm)

First Available: 2012-06-05

Amazon Price: $61.09 | as of 11/20/2018(11:49pm pst)
Availibility: Usually ships in 24 hours
List Price: $62.93 | Used Price: $48.87

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

ARP 234-4317 2344317 Stud Kit

Model: 234-4317   |    Mpn: 2344317   |    Ean: 0672036031879   |    PartNumber: 2344317   |   Asin: B000CFQ6WY

SB Chevy LS1 pro-series 04 12pt head stud kit

Features

Brand: ARP   |   Manufacturer: ARP

Item Dimensions: 9 x 3 x 4 inches (22.9 x 7.6 x 10.2 cm)   |   Package Dimensions: 2.1 x 4.2 x 8.7 inches (5.3 x 10.7 x 22.1 cm)

First Available: 2012-06-05

Amazon Price: $278.28 | as of 11/20/2018(11:49pm pst)
Availibility: Usually ships in 24 hours
List Price: $315.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

ARP 4341301 Header Stud Kit for Chevy LS1

Model: 434-1301   |    Mpn: 4341301   |    Ean: 0672036030599   |    PartNumber: 4341301   |   Asin: B003XUIMOK

Chevy LS1 header stud kitAvailable only in stainless steel with 12-point headsSet of 12

Features

Brand: ARP   |   Manufacturer: ARP

Item Dimensions: 10 x 1 x 6 inches (25.4 x 2.5 x 15.2 cm)   |   Package Dimensions: 0.2 x 6 x 9 inches (0.5 x 15.2 x 22.9 cm)

First Available: 2012-06-05

Amazon Price: $106.99 | as of 11/20/2018(11:49pm pst)
Availibility: Usually ships in 24 hours
List Price: $107.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

ARP 2565701 4-Bolt Main Stud for 4.6L 4 Valve with Windage Tray Modular Ford

Model: 256-5701   |    Mpn: 2565701   |    Ean: 0672036011581   |    PartNumber: 2565701   |   Asin: B001O07LBG

Ford Modular 4-bolt w/windage tray main stud kit

Features

Brand: ARP   |   Manufacturer: ARP

Item Dimensions: 9 x 3 x 4 inches (22.9 x 7.6 x 10.2 cm)   |   Package Dimensions: 2.1 x 4.2 x 8.7 inches (5.3 x 10.7 x 22.1 cm)

First Available: 2012-06-05

Amazon Price: Too low to display | as of 11/20/2018(11:49pm pst)
Availibility: Usually ships in 24 hours
List Price: $202.75

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

ARP 752-1250 Black Oxide 3/8-24" Fine RH Thread 1.250" UHL 6-Point Bolt with 3/8" Socket and Washer, (Set of 5)

Model: 752-1250   |    Mpn: 752-1250   |    Ean: 0672036025106   |    PartNumber: 752-1250   |   Asin: B00899WJM6

Automotive Racing Products (ARP) started in 1968, in Southern California. Their product line includes everything from engine and driveline fasteners for OEM replacement parts to exotic specialty hardware for the Formula 1, Indycar, NASCAR, NHRA Drag Racing, and Marine Applications. They produce a number of specialty products like cylinder head fastener kits, connecting rod bolts, exhaust manifold/header fastener kits, oil pan fastener kits, piston ring compressors, and more.

Features

Brand: ARP   |   Manufacturer: ARP

Package Dimensions: 0.7 x 3.7 x 5.8 inches (1.8 x 9.4 x 14.7 cm)

First Available: 2012-06-04

Amazon Price: $17.71 | as of 11/20/2018(11:49pm pst)
Availibility: Usually ships in 24 hours
List Price: $17.71

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #20

ARP 200-8687 Black 3/8" ID x 3/4" OD Washer - 10 Piece

Model: 200-8687   |    Mpn: ARP-200-8687   |    Ean: 0672036022976   |    PartNumber: ARP-200-8687   |   Asin: B0066TCRIM

Automotive Racing Products (ARP) started in 1968, in Southern California. Their product line includes everything from engine and driveline fasteners for OEM replacement parts to exotic specialty hardware for the Formula 1, Indycar, NASCAR, NHRA Drag Racing, and Marine Applications. They produce a number of specialty products like cylinder head fastener kits, connecting rod bolts, exhaust manifold/header fastener kits, oil pan fastener kits, piston ring compressors, and more.

Features

Brand: ARP   |   Manufacturer: ARP

Item Dimensions: 0.1 x 3.85 x 5.9 inches (0.3 x 9.8 x 15.0 cm)   |   Package Dimensions: 0.2 x 3.8 x 5.8 inches (0.5 x 9.7 x 14.7 cm)

First Available: 2012-10-25

Amazon Price: $11.74 | as of 11/20/2018(11:49pm pst)
Availibility: Usually ships in 24 hours
List Price: $12.36

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #21

ARP 2002413 Quadrajet Carburetor Stud Kit with 1/4" Base Gasket

Model: 200-2413   |    Mpn: 2002413   |    Ean: 0672036020019   |    PartNumber: 2002413   |   Asin: B001T6EK4G

ARP 2002413 Quadrajet Carburetor Stud Kit with 1/4 Base Gasket

Features

Brand: ARP   |   Manufacturer: ARP

Package Dimensions: 0.6 x 5.6 x 9.8 inches (1.5 x 14.2 x 24.9 cm)

Amazon Price: $16.99 | as of 11/20/2018(11:49pm pst)
Availibility: Usually ships in 24 hours
List Price: $20.30

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #22

ARP 534-9505 12-Point Stainless Steel Complete Engine Fastener Kit for GM LS

Model: 534-9505   |    Mpn: 534-9505   |    Ean: 0672036036331   |    PartNumber: 534-9505   |   Asin: B009XUOF5E

It's easy to assemble a show-quality engine when you use ARP's handy Engine & Accessory Fastener Kit. Virtually everything you need comes completely organized in one convenient package (no need to deal with twelve different part numbers) More importantly, each and every fastener is superior in strength to the OEM bolts, and also significantly better than hardware grades (even Grade 8). You have a choice of two premium quality materials and finishes.Traditionalists will appreciate the strength and functionality of ARP's heat-treated 8740 Chrome Moly steel alloy bolts, which feature a black oxide finish.Those who desire a dazzling engine will no doubt prefer fasteners made of ARP's specially alloyed Stainless 300 material, which has the added benefit of being virtually impervious to rust and corrosion. The stainless steel is polished to achieve a brilliant luster, and provides a distinctive, maintenance-free environment.Each kit has a dozen different type fasteners, all neatly organized and labeled in protective vacuum-wrapped packages. Both materials are nominally rated at 170,000 psi tensile strength and come in both hex and 12-point heads. Please note that these kits are designed for carbureted engines. Newer EFI applications may require the purchase of additional fasteners. Engine & Accessory Fastener Kit 12Point Head Material Stainless Steel

Features

  • Description: SB Chevy LS Series SS 12pt accessory kit Pkg: kit Pkg Type: box Material_1: Stainless Steel Finish_1: Polished Material_2: N/A Finish_2: N/A Origin: USA Category: Accessories Product Line: Engine & Accessory Kit Type: Bolt
  • See more on Amazon...

Brand: ARP   |   Manufacturer: ARP

Package Dimensions: 2.2 x 8.3 x 8.7 inches (5.6 x 21.1 x 22.1 cm)

First Available: 2012-10-25

Amazon Price: $381.99 | as of 11/20/2018(11:49pm pst)
Availibility: Usually ships in 24 hours
List Price: $381.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. ARP 2565701 4-Bolt Main Stud for 4.6L 4 Valve with Windage Tray Modular Ford
  2. ARP 752-1250 Black Oxide 3/8-24" Fine RH Thread 1.250" UHL 6-Point Bolt with 3/8" Socket and Washer,...
  3. ARP 250-4202 Stud Kit
  4. ARP 2025402 Stud Kit
  5. ARP 200-8687 Black 3/8" ID x 3/4" OD Washer - 10 Piece
  6. ARP 1007703 Wheel Studs - Pack of 5
  7. ARP 2604701 Bolt Kit
  8. ARP 2002413 Quadrajet Carburetor Stud Kit with 1/4" Base Gasket
  9. ARP 534-9505 12-Point Stainless Steel Complete Engine Fastener Kit for GM LS

Most Wished For

  1. ARP 250-4202 Stud Kit
  2. ARP 230-7003 2307003 Oil Pump Stud Kit
  3. ARP 2307001 Oil Pump Studs
  4. ARP 2025402 Stud Kit
  5. ARP 151-5406 Main Stud Kit for Ford 2.0L Zetec
  6. ARP 234-4319 12-Point Head Stud Kit for Small Block Chevy
  7. ARP 218-5402 Main Stud Kit
  8. ARP 5949601 Stainless 300 Hex Engine & Fastener Kit
  9. ARP 234-4317 2344317 Stud Kit
  10. ARP 4341301 Header Stud Kit for Chevy LS1

Most Gifted

  1. ARP 2565701 4-Bolt Main Stud for 4.6L 4 Valve with Windage Tray Modular Ford
  2. ARP 752-1250 Black Oxide 3/8-24" Fine RH Thread 1.250" UHL 6-Point Bolt with 3/8" Socket and Washer,...
  3. ARP 250-4202 Stud Kit
  4. ARP 2025402 Stud Kit
  5. ARP 200-8687 Black 3/8" ID x 3/4" OD Washer - 10 Piece
  6. ARP 1007703 Wheel Studs - Pack of 5
  7. ARP 2604701 Bolt Kit
  8. ARP 2002413 Quadrajet Carburetor Stud Kit with 1/4" Base Gasket
  9. ARP 534-9505 12-Point Stainless Steel Complete Engine Fastener Kit for GM LS

Top Selling

  1. ARP 250-4202 Stud Kit
  2. ARP 150-3102 Black Oxide Hex Motor Mount Bolt Kit
  3. ARP 1007703 Wheel Studs - Pack of 5
  4. ARP 2604701 Bolt Kit
  5. ARP 230-7003 2307003 Oil Pump Stud Kit
  6. ARP 218-5402 Main Stud Kit
  7. ARP 2442901 Pro Series Flexplate Bolt Kit for Gen II/LS Series Small Block Chevrolet
  8. ARP 142-4001 6-Point Head Stud Kit
  9. ARP 156-1001 Camshaft Tower Stud Kit for Ford 3V Modular
  10. ARP 2345606 Main Stud Kit, 200,000 PSI Chrome Moly Steel, For Select Chevrolet Small Block 4-Bolt Ma...



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Care & Cleaning


Electronics


Exterior Accessories


Interior Accessories


Lights


Oils & Fluids


Tires & Wheels


Tools & Equipment


Performance Parts


Rv Parts


Motorcycle & Powersports


Replacement Parts



We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.