Frontpage > Car & Automotive > Performance Parts > Suspension Ball Joints

Best Suspension Ball Joints - Buying Guide

Last Updated: 01/20/2019

Share on


  #1

Proforged 101-10048 Tall Lower Ball Joint - RWD

Model: 101-10048   |    Mpn: 101-10048   |    Ean: 0849180006415   |    PartNumber: 101-10048   |   Asin: B008VQKZZA

Tall ball joints are one of the hottest trends in the aftermarket, and for good reason. They correct fundamental deficiencies in the suspension that cause poor handling. In a modern performance car, the top of the tire leans inwards around a turn to ensure maximum contact with the road. Classic muscle cars are backwards - the top of the tire leans out, yielding a small tire contact patch and poor handling. Proforged Tall Ball Joints fix this problem and deliver a dramatic improvement in handling.

Features

  • TALL BALL JOINTS FOR ULTIMATE PERFORMANCE. Proforged tall ball joints are built with a 0.50" longer ball stud to achieve an optimal negative camber curve - dramatically improving your handling. Forged SAE4140 chromoly steel studs are enclosed in forged SAE1045 housings, heat treated for strength and durability, and every fit surface is CNC machined for precision fit and finish. Each unit is sealed with specially-designed CR-rubber boots for ultimate durability.
  • 1,000,000 MILE WARRANTY. You can install our ball joints with confidence knowing that every part we sell is backed by our industry-leading 1,000,000 mile limited warranty. We can offer this because our parts are engineered, tested, re-tested, and subject to strict quality control procedures - our quality is second to none.
  • BUILT FOR PROFESSIONALS. There's a reason why the most well-respected performance suspension brands use Proforged ball joints - we're fanatical about quality, performance, and durability. Professionals save time and money with our competitively-priced products that outlast inferior brands. Do the job with confidence - replace your worn components with the leader in performance ball joints: Proforged.
  • WHAT IS A BALL JOINT? A ball joint is an enclosed spherical bearing that connects the control arm to the steering knuckle or spindle - it is a ball-and-socket design, just like your hip, and it needs to be replaced as it wears out. A worn ball joint causes poor handling and makes it difficult or impossible to achieve an alignment, which leads to rapid tire wear. Replacing your worn ball joints gives a noticeable improvement in steering feel, handling, and safety.
  • BUY WITH CONFIDENCE. There's a reason that the most well-respected performance suspension manufacturers buy from Proforged: we're the only brand of chassis parts that offers race-day performance at a price within your budget - and backs it up with a 1,000,000 mile limited warranty. Buy today and get your car, truck, or racecar back on the road and stronger than ever.
  • See more on Amazon...

Brand: Proforged   |   Manufacturer: Proforged

Item Dimensions: 3.3 x 3.2 x 4.1 inches (8.4 x 8.1 x 10.4 cm)   |   Package Dimensions: 4 x 4.6 x 5.5 inches (10.2 x 11.7 x 14.0 cm)

First Available: 2012-08-08

Amazon Price: $49.99 | as of 01/20/2019(11:15pm pst)
Availibility: Usually ships in 24 hours
List Price: $49.99

Warranty: Limited Lifetime Warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

Proforged 101-10302 Greasable Front Lower Ball Joint

Model: 101-10302   |    Mpn: 101-10302   |    Ean: 0849180013376   |    PartNumber: 101-10302   |   Asin: B00ANJ82O4

Proforged Ball Joints are laboratory tested and feature improved design over the competition for increased longevity and durability, even in the most demanding conditions. Proforged ball joints are available for nearly every year, make and model vehicle found on the road today.

Features

  • 1,000,000 MILE WARRANTY. You can install our ball joints with confidence knowing that every part we sell is backed by our industry-leading 1,000,000 mile limited warranty. We can offer this because our parts are engineered, tested, re-tested, and subject to strict quality control procedures - our quality is second to none.
  • CRAZY STRONG BALL JOINTS. Proforged ball joints are built using some of the toughest steel on the planet. Forged SAE4140 chromoly steel studs are enclosed in forged SAE1045 housings, heat treated for strength and durability, and every fit surface is CNC machined for precision fit and finish. Each unit is sealed with specially-designed CR-rubber boots for ultimate durability.
  • BUILT FOR PROFESSIONALS. There's a reason why the most well-respected performance suspension brands use Proforged ball joints - we're fanatical about quality, performance, and durability. Professionals save time and money with our competitively-priced products that outlast inferior brands. Do the job with confidence - replace your worn components with the leader in performance ball joints: Proforged.
  • WHAT IS A BALL JOINT? A ball joint is an enclosed spherical bearing that connects the control arm to the steering knuckle or spindle - it is a ball-and-socket design, just like your hip, and it needs to be replaced as it wears out. A worn ball joint causes poor handling and makes it difficult or impossible to achieve an alignment, which leads to rapid tire wear. Replacing your worn ball joints gives a noticeable improvement in steering feel, handling, and safety.
  • BUY WITH CONFIDENCE. There's a reason that the most well-respected performance suspension manufacturers buy from Proforged: we're the only brand of chassis parts that offers race-day performance at a price within your budget - and backs it up with a 1,000,000 mile limited warranty. Buy today and get your car, truck, or racecar back on the road and stronger than ever.
  • See more on Amazon...

Brand: Proforged   |   Manufacturer: Proforged

Package Dimensions: 3 x 4.2 x 5 inches (7.6 x 10.7 x 12.7 cm)

First Available: 2012-11-27

Amazon Price: $44.45 | as of 01/20/2019(11:15pm pst)
Availibility: Usually ships in 1 to 3 months
List Price: $44.45

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

Steeda 555-8101 X2 Ball Joint

Model: 555-8101   |    Mpn: 5558101   |    Ean: 0012949005732   |    PartNumber: 5558101   |   Asin: B002L1J066

Alignment Kit: various models; X2 Ball Joint Kit

Features

  • Fits 1994-2004 Mustang All Models
  • Improved front end grip and steering response
  • Reduced understeer at cornering limit
  • Restores front end roll center geometry
  • Set of 2
  • See more on Amazon...

Brand: Steeda   |   Manufacturer: Steeda

Item Dimensions: 4.6 x 6.3 x 6.7 inches (11.7 x 16.0 x 17.0 cm)   |   Package Dimensions: 5.98 x 6.5 x 7.01 inches (15.2 x 16.5 x 17.8 cm)

Amazon Price: $123.86 | as of 01/20/2019(11:15pm pst)
Availibility: Usually ships in 24 hours
List Price: $139.95

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

Mevotech MK80630 Upper Suspension Ball Joint

Model: MK80630   |    Mpn: MK80630   |    Ean: 0669719062626   |    PartNumber: MK80630   |   Asin: B0049TSWCG

BALL JOINT

Features

Brand: Mevotech   |   Manufacturer: Mevotech

Package Dimensions: 3.15 x 4.19 x 4.95 inches (8.0 x 10.6 x 12.6 cm)

Amazon Price: $25.27 | as of 01/20/2019(11:15pm pst)
Availibility: Usually ships in 2-3 business days
List Price: $59.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

Energy Suspension 9.13125G BALLJOINT Replacement Boots

Model: 9.13125G   |    Mpn: ENE-9.13125G   |    Ean: 0703639410973   |    PartNumber: ENE-9.13125G   |   Asin: B000CN5EUQ

Energy Suspension is the world's leader in developing and manufacturing performance POLYURETHANE automotive suspension bushings. In order to assure perfect fitment, Energy Suspension manufactures their bushings to exact specifications - assuring an exact fitment to your existing suspension components. These bushings are engineered to exact the maximum in handling performance out your vehicle.

Features

Brand: Energy Suspension   |   Manufacturer: Energy Suspension

Item Dimensions: 2.1 x 2.8 x 6.8 inches (5.3 x 7.1 x 17.3 cm)   |   Package Dimensions: 2 x 2.5 x 6.5 inches (5.1 x 6.4 x 16.5 cm)

Amazon Price: $7.08 | as of 01/20/2019(11:15pm pst)
Availibility: Usually ships in 1 to 2 days
List Price: $8.95

Warranty: 2 year manufacturer

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

Proforged 101-10240 Greasable Front Upper Ball Joint - RWD

Model: 101-10240   |    Mpn: 101-10240   |    Ean: 0849180002639   |    PartNumber: 101-10240   |   Asin: B008VQM7VK

Laboratory tested and proven in the real world, their ball joints feature improved design over the competition for increased longevity and durability, even in the most demanding conditions. Proforged ball joints are available for nearly every year, make, and model vehicle.

Features

  • 1,000,000 MILE WARRANTY. You can install our ball joints with confidence knowing that every part we sell is backed by our industry-leading 1,000,000 mile limited warranty. We can offer this because our parts are engineered, tested, re-tested, and subject to strict quality control procedures - our quality is second to none.
  • CRAZY STRONG BALL JOINTS. Proforged ball joints are built using some of the toughest steel on the planet. Forged SAE4140 chromoly steel studs are enclosed in forged SAE1045 housings, heat treated for strength and durability, and every fit surface is CNC machined for precision fit and finish. Each unit is sealed with specially-designed CR-rubber boots for ultimate durability.
  • BUILT FOR PROFESSIONALS. There's a reason why the most well-respected performance suspension brands use Proforged ball joints - we're fanatical about quality, performance, and durability. Professionals save time and money with our competitively-priced products that outlast inferior brands. Do the job with confidence - replace your worn components with the leader in performance ball joints: Proforged.
  • WHAT IS A BALL JOINT? A ball joint is an enclosed spherical bearing that connects the control arm to the steering knuckle or spindle - it is a ball-and-socket design, just like your hip, and it needs to be replaced as it wears out. A worn ball joint causes poor handling and makes it difficult or impossible to achieve an alignment, which leads to rapid tire wear. Replacing your worn ball joints gives a noticeable improvement in steering feel, handling, and safety.
  • BUY WITH CONFIDENCE. There's a reason that the most well-respected performance suspension manufacturers buy from Proforged: we're the only brand of chassis parts that offers race-day performance at a price within your budget - and backs it up with a 1,000,000 mile limited warranty. Buy today and get your car, truck, or racecar back on the road and stronger than ever.
  • See more on Amazon...

Brand: Proforged   |   Manufacturer: Proforged

Package Dimensions: 2.6 x 3.3 x 3.3 inches (6.6 x 8.4 x 8.4 cm)

First Available: 2012-08-08

Amazon Price: $28.76 | as of 01/20/2019(11:15pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $30.61

Warranty: Limited Lifetime Warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

Energy Suspension 9.13128R BALLJOINT Boots

Model: 9.13128R   |    Mpn: ENE-9.13128R   |    Ean: 0703639411109   |    PartNumber: ENE-9.13128R   |   Asin: B000CNB414

Energy Suspension is the world's leader in developing and manufacturing performance POLYURETHANE automotive suspension bushings. In order to assure perfect fitment, Energy Suspension manufactures their bushings to exact specifications - assuring an exact fitment to your existing suspension components. These bushings are engineered to exact the maximum in handling performance out your vehicle.

Features

Brand: Energy Suspension   |   Manufacturer: Energy Suspension

Item Dimensions: 7 x 3 x 2 inches (17.8 x 7.6 x 5.1 cm)   |   Package Dimensions: 2.1 x 2.4 x 6.3 inches (5.3 x 6.1 x 16.0 cm)

Amazon Price: $7.09 | as of 01/20/2019(11:15pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $8.95

Warranty: 2 year manufacturer

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

Skunk2 916-05-5670 Pro Series Ball-Joint for Honda Civic/Acura Integra

Model: 916-05-5670   |    Mpn: 916-05-5670   |    Ean: 0647367178753   |    PartNumber: 916-05-5670   |   Asin: B008L0GACI

Pro Series Ball Joints V2.0, which are compatible with 1992-2000 Civic and 1994-2001 Integra Tuner Series, Pro Series, and Pro Series Plus front camber kits, may look similar to their predecessor on the surface, but they are not.

Features

  • Pro Series Ball Joints are sold individually Compatible with '92-'00 Civic and '94-'01 Integra Tuner Series, Pro Series, and Pro Series Plus Front Camber Kits
  • See more on Amazon...

Brand: Skunk2 Racing   |   Manufacturer: Skunk2

Item Dimensions: 6 x 6 x 6 inches (15.2 x 15.2 x 15.2 cm)   |   Package Dimensions: 1.6 x 3.1 x 3.4 inches (4.1 x 7.9 x 8.6 cm)

First Available: 2013-03-16

Amazon Price: $49.49 | as of 01/20/2019(11:15pm pst)
Availibility: Usually ships in 24 hours
List Price: $49.49 | Used Price: $33.40

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

Alloy USA 11801 Upper & Lower Ball Joint Kit - 4 Pieces

Model: 11801   |    Mpn: 11801   |    Ean: 0804314241384   |    PartNumber: 11801   |   Asin: B00EDWEZ7A

The Alloy USA HD ball joints were designed with a low profile (grease) zerk fitting, a feature not offered on factory replacement parts. Inner insert is replaced by a high strength steel socket. (Replaces factory plastic nylon insert). This steel insert increases Ball Joint strength. This is a must for lifted vehicles running tires larger than stock. Ball and socket use an exclusive threaded preload system that prolongs Joint life. Ball and shaft are constructed from SAE 4150 Chromoly steel. Will not work for later model Grand Cherokees with CV axles shafts and rubber boots.


Premium steel socket insert View larger
Zerk grease fitting allows for
continued maintenance
View larger Over time big tires will quicken wear on factory ball joints, which could lead to death wobble and stability problems. Alloy USA has the safe reliable solution with these new Heavy Duty Ball Joint Kits. Constructed of high strength steel for greater durability and toughness to minimize wear, these ball joints have unique low-profile zerk fittings for regular maintenance, a feature not available with the factory original style. Inside, the insert has been replaced with a high strength steel socket which replaces the factory nylon insert. The use of steel greatly increases the overall ball joint strength and durability. A must for lifted vehicles running any tire larger than stock applications. The new SAE 4140 chromoly steel ball joints are assembled using an exclusive threaded preload system to ensure tolerance for prolonged ball joint life and precise steering.

Standard Features
Heavy duty ball joint kit includes 2 upper and 2 lower ball joints Made from SAE 4120 and 4140 heat treated high grade steel Zerk grease fitting allows for continued maintenance Ball joints can be greased after installation Kits feature threaded preload system for prolonged ball joint life and precise steering
Limited 5-Year Warranty
Subject to the terms, exclusions and limitations herein and with respect only to products first sold in the United States, Omix-ADA warrants to the initial retail purchaser ( purchaser ) only that when installed and used on purchaser s vehicle according to supplied product installation instructions and/or warnings, purchaser s Omix-ADA product shall be free of defects in material and workmanship for five (5) years.


About Rugged Ridge
Rugged Ridge develops and sells Jeep parts accessories for the growing Jeep and off road enthusiast market. Rugged Ridge is a division of Omix-ADA, the market-leader for replacement and restoration Jeep parts. With this know-how and experience the Rugged Ridge pedigree is well established in the Jeep market and with the Jeep enthusiast. Realizing that there was a need for new Jeep accessories, the Rugged Ridge brand was established in 2005 to fill that need. Rugged Ridge has designed and manufactured over 3,000 products for the Jeep market and continues to develop hundreds of additional Jeep accessories each year. Many of the recent developed Jeep accessories are patented, like the Jeep floor liners, Jeep snorkel and Jeep XHD modular bumpers. Count on Rugged Ridge to provide you with true and proven Jeep parts and accessories.

Features

  • Steel Construction
  • Greater strength
  • Low profile Zerk fittings
  • Hardware included
  • Exclusive threaded preload system
  • See more on Amazon...

Brand: Alloy USA   |   Manufacturer: Alloy USA

Item Dimensions: 3 x 9 x 15 inches (7.6 x 22.9 x 38.1 cm)   |   Package Dimensions: 4.1 x 4.4 x 5.4 inches (10.4 x 11.2 x 13.7 cm)

Amazon Price: $183.10 | as of 01/20/2019(11:15pm pst)
Availibility: Usually ships in 24 hours
List Price: $188.06

Warranty: 5 Year Limited

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

Specialty Products Company 67125 1.5 Adjustable Ball Joint for Honda/Acura

Model: 67125   |    Mpn: 67125   |    Ean: 0082642671251   |    PartNumber: 67125   |   Asin: B000CB5ULG

These adjustable upper ball joints make front camber adjustments for many vehicles with upper control arms. By replacing the factory ball joint, this sliding ball joint allows for greater changes than previously available. With an OE quality replacementball joint, this sliding plate assembly is perfect for vehicles that have been lowered for performance, or retain the factory ride height. For changes greater that +1.5 degrees check out our Extended Range Ball Joints.

Features

Brand: Specialty Products Company   |   Manufacturer: Specialty Products

Item Dimensions: 4 x 5 x 4 inches (10.2 x 12.7 x 10.2 cm)   |   Package Dimensions: 3.4 x 3.9 x 4.7 inches (8.6 x 9.9 x 11.9 cm)

Amazon Price: $73.71 | as of 01/20/2019(11:15pm pst)
Availibility: Usually ships in 24 hours
List Price: $73.71

Warranty: Limited Lifetime

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

Buddy Club BC02-BJP1-H002 P1 Racing Extended Ball Joint for Honda Civic 1992-2000 / Acura Integra 1994-2001

Model: BC02-BJP1-H002   |    Mpn: BC02BJP1H002   |    PartNumber: BC02BJP1H002   |   Asin: B003JAC02Y

By extending the ball joint on the front lower control arm, the Buddy Club P1 Racing Ball Joint raises the roll center and brings it closer to the center of gravity, thus increasing the vehicle's roll stiffness and eliminating any unwanted side effects to the vehicle's suspension geometry. The ball joint dust boots are sturdy and snug and will withstand heat and the rigors of racing much better than your factory dust boots. The included castle nuts are strong and will not strip. The Buddy Club P1 Racing extended ball joints help return the suspension geometry to its ideal position while still allowing you to lower your car's center of gravity. Furthermore, they maximize vehicle tire grip by allowing increased front camber adjustability.

Features

  • Increases steering response
  • Increases stability
  • Better shock response on the front
  • Removes all bump steer
  • See more on Amazon...

Brand: Buddy Club   |   Manufacturer: Buddy Club

Package Dimensions: 2.9 x 5 x 5.9 inches (7.4 x 12.7 x 15.0 cm)

Amazon Price: $148.99 | as of 01/20/2019(11:15pm pst)
Availibility: Usually ships in 24 hours
List Price: $149.32

Warranty: 1 year

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

Proforged 101-10016 Tall Upper Ball Joint

Model: 101-10016   |    Mpn: 101-10016   |    Ean: 0849180006439   |    PartNumber: 101-10016   |   Asin: B008VQKP5A

Tall ball joints are one of the hottest trends in the aftermarket, and for good reason. They correct fundamental deficiencies in the suspension that cause poor handling. In a modern performance car, the top of the tire leans inwards around a turn to ensure maximum contact with the road. Classic muscle cars are backwards - the top of the tire leans out, yielding a small tire contact patch and poor handling. Proforged Tall Ball Joints fix this problem and deliver a dramatic improvement in handling.

Features

  • TALL BALL JOINTS FOR ULTIMATE PERFORMANCE. Proforged tall ball joints are built with a 0.50" longer ball stud to achieve an optimal negative camber curve - dramatically improving your handling. Forged SAE4140 chromoly steel studs are enclosed in forged SAE1045 housings, heat treated for strength and durability, and every fit surface is CNC machined for precision fit and finish. Each unit is sealed with specially-designed CR-rubber boots for ultimate durability.
  • 1,000,000 MILE WARRANTY. You can install our ball joints with confidence knowing that every part we sell is backed by our industry-leading 1,000,000 mile limited warranty. We can offer this because our parts are engineered, tested, re-tested, and subject to strict quality control procedures - our quality is second to none.
  • BUILT FOR PROFESSIONALS. There's a reason why the most well-respected performance suspension brands use Proforged ball joints - we're fanatical about quality, performance, and durability. Professionals save time and money with our competitively-priced products that outlast inferior brands. Do the job with confidence - replace your worn components with the leader in performance ball joints: Proforged.
  • WHAT IS A BALL JOINT? A ball joint is an enclosed spherical bearing that connects the control arm to the steering knuckle or spindle - it is a ball-and-socket design, just like your hip, and it needs to be replaced as it wears out. A worn ball joint causes poor handling and makes it difficult or impossible to achieve an alignment, which leads to rapid tire wear. Replacing your worn ball joints gives a noticeable improvement in steering feel, handling, and safety.
  • BUY WITH CONFIDENCE. There's a reason that the most well-respected performance suspension manufacturers buy from Proforged: we're the only brand of chassis parts that offers race-day performance at a price within your budget - and backs it up with a 1,000,000 mile limited warranty. Buy today and get your car, truck, or racecar back on the road and stronger than ever.
  • See more on Amazon...

Brand: Proforged   |   Manufacturer: Proforged

Item Dimensions: 4.6 x 4.1 x 5.4 inches (11.7 x 10.4 x 13.7 cm)   |   Package Dimensions: 1.5 x 2.5 x 4.8 inches (3.8 x 6.4 x 12.2 cm)

First Available: 2012-08-08

Amazon Price: $49.99 | as of 01/20/2019(11:15pm pst)
Availibility: Usually ships in 24 hours
List Price: $49.99

Warranty: Limited Lifetime Warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

Proforged 101-10037 Greasable E-Coated Front Upper Ball Joint - RWD

Model: 101-10037   |    Mpn: 101-10037   |    Ean: 0849180002080   |    PartNumber: 101-10037   |   Asin: B008VQKW4O

Laboratory tested and proven in the real world, their ball joints feature improved design over the competition for increased longevity and durability, even in the most demanding conditions. Proforged ball joints are available for nearly every year, make, and model vehicle.

Features

  • 1,000,000 MILE WARRANTY. You can install our ball joints with confidence knowing that every part we sell is backed by our industry-leading 1,000,000 mile limited warranty. We can offer this because our parts are engineered, tested, re-tested, and subject to strict quality control procedures - our quality is second to none.
  • CRAZY STRONG BALL JOINTS. Proforged ball joints are built using some of the toughest steel on the planet. Forged SAE4140 chromoly steel studs are enclosed in forged SAE1045 housings, heat treated for strength and durability, and every fit surface is CNC machined for precision fit and finish. Each unit is sealed with specially-designed CR-rubber boots for ultimate durability.
  • BUILT FOR PROFESSIONALS. There's a reason why the most well-respected performance suspension brands use Proforged ball joints - we're fanatical about quality, performance, and durability. Professionals save time and money with our competitively-priced products that outlast inferior brands. Do the job with confidence - replace your worn components with the leader in performance ball joints: Proforged.
  • WHAT IS A BALL JOINT? A ball joint is an enclosed spherical bearing that connects the control arm to the steering knuckle or spindle - it is a ball-and-socket design, just like your hip, and it needs to be replaced as it wears out. A worn ball joint causes poor handling and makes it difficult or impossible to achieve an alignment, which leads to rapid tire wear. Replacing your worn ball joints gives a noticeable improvement in steering feel, handling, and safety.
  • BUY WITH CONFIDENCE. There's a reason that the most well-respected performance suspension manufacturers buy from Proforged: we're the only brand of chassis parts that offers race-day performance at a price within your budget - and backs it up with a 1,000,000 mile limited warranty. Buy today and get your car, truck, or racecar back on the road and stronger than ever.
  • See more on Amazon...

Brand: Proforged   |   Manufacturer: Proforged

Package Dimensions: 3.4 x 3.6 x 3.7 inches (8.6 x 9.1 x 9.4 cm)

First Available: 2012-08-08

Amazon Price: $15.59 | as of 01/20/2019(11:15pm pst)
Availibility: Usually ships in 24 hours
List Price: $15.71

Warranty: Limited Lifetime Warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

Specialty Products Company 40920 Ball Joint Press Set for Honda

Model: 40920   |    Mpn: 40920   |    Ean: 0082642409205   |    PartNumber: 40920   |   Asin: B000IX15D0

This tool was specifically designed to remove the original equipment ball joints on smaller cars when installing SPC Performance's sliding ball joints. With this revolutionary design you can remove the ball joint from the front upper control arm without removing the arm from the vehicle, saving time and costs. Packaged in a convenient blow-molded plastic case this set comes complete with adapters for both removing and installing stock or Specialty Product's sliding ball joints. Set includes the following 4433,4434,40923,40925 and 40927.

Features

Brand: Specialty Products Company   |   Manufacturer: Specialty Products

Package Dimensions: 2.8 x 10.1 x 13.1 inches (7.1 x 25.7 x 33.3 cm)

Amazon Price: $109.50 | as of 01/20/2019(11:15pm pst)
Availibility: Usually ships in 24 hours
List Price: $109.50

Warranty: Limited Lifetime

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

Proforged 101-10213 Front Right Lower Ball Joint

Model: 101-10213   |    Mpn: 101-10213   |    Ean: 0849180001106   |    PartNumber: 101-10213   |   Asin: B008VQM1WK

Laboratory tested and proven in the real world, their ball joints feature improved design over the competition for increased longevity and durability, even in the most demanding conditions. Proforged ball joints are available for nearly every year, make, and model vehicle.

Features

  • 1,000,000 MILE WARRANTY. You can install our ball joints with confidence knowing that every part we sell is backed by our industry-leading 1,000,000 mile limited warranty. We can offer this because our parts are engineered, tested, re-tested, and subject to strict quality control procedures - our quality is second to none.
  • CRAZY STRONG BALL JOINTS. Proforged ball joints are built using some of the toughest steel on the planet. Forged SAE4140 chromoly steel studs are enclosed in forged SAE1045 housings, heat treated for strength and durability, and every fit surface is CNC machined for precision fit and finish. Each unit is sealed with specially-designed CR-rubber boots for ultimate durability.
  • BUILT FOR PROFESSIONALS. There's a reason why the most well-respected performance suspension brands use Proforged ball joints - we're fanatical about quality, performance, and durability. Professionals save time and money with our competitively-priced products that outlast inferior brands. Do the job with confidence - replace your worn components with the leader in performance ball joints: Proforged.
  • WHAT IS A BALL JOINT? A ball joint is an enclosed spherical bearing that connects the control arm to the steering knuckle or spindle - it is a ball-and-socket design, just like your hip, and it needs to be replaced as it wears out. A worn ball joint causes poor handling and makes it difficult or impossible to achieve an alignment, which leads to rapid tire wear. Replacing your worn ball joints gives a noticeable improvement in steering feel, handling, and safety.
  • BUY WITH CONFIDENCE. There's a reason that the most well-respected performance suspension manufacturers buy from Proforged: we're the only brand of chassis parts that offers race-day performance at a price within your budget - and backs it up with a 1,000,000 mile limited warranty. Buy today and get your car, truck, or racecar back on the road and stronger than ever.
  • See more on Amazon...

Brand: Proforged   |   Manufacturer: Proforged

Item Dimensions: 3 x 5.3 x 10 inches (7.6 x 13.5 x 25.4 cm)   |   Package Dimensions: 3.3 x 5.5 x 8.1 inches (8.4 x 14.0 x 20.6 cm)

First Available: 2012-08-08

Amazon Price: $49.47 | as of 01/20/2019(11:15pm pst)
Availibility: Usually ships in 24 hours
List Price: $49.47 | Used Price: $27.63

Warranty: Limited Lifetime Warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

Yukon Gear & Axle (YSPBJ-012) Ball Joint Kit for Dana 30 Differential

Model: YSPBJ-012   |    Mpn: YSPBJ-012   |    Ean: 0883584334545   |    PartNumber: YSPBJ-012   |   Asin: B00EHN3ZXK

Yukon Gear and Axle offers small parts for a wide variety of applications to ensure you have the parts you need to complete your differential repair, rebuild, restoration or upgrade.

Features

  • 1 Year Warranty
  • High Quality Small Parts
  • Engineered to Fit Specific Differential Applications
  • Services One Side
  • Complete Kit for Upper and Lower
  • See more on Amazon...

Brand: Yukon Gear   |   Manufacturer: Yukon Gear

Package Dimensions: 2.9 x 4.2 x 5.7 inches (7.4 x 10.7 x 14.5 cm)

Amazon Price: $77.55 | as of 01/20/2019(11:15pm pst)
Availibility: Usually ships in 24 hours
List Price: $90.77

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

SPC Performance 25477 Ball Joint Boot Replacement Kit

Model: 25477   |    Mpn: 25477   |    Ean: 0082642254775   |    PartNumber: 25477   |   Asin: B00HDFDK48

Replace your balljoint boots on several popular upper control arms. This kit includes 2 ball joint boots and 2 retaining rings.

Features

Brand: SPC Performance   |   Manufacturer: SPC Performance

Package Dimensions: 0.31 x 5 x 9.02 inches (0.8 x 12.7 x 22.9 cm)

Amazon Price: $14.70 | as of 01/20/2019(11:15pm pst)
Availibility: Usually ships in 24 hours
List Price: $20.09

Warranty: LTD LIFETIME

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

Proforged 101-10350 Greasable Front Lower Ball Joint

Model: 101-10350   |    Mpn: 101-10350   |    Ean: 0849180013437   |    PartNumber: 101-10350   |   Asin: B00ANJ8438

Proforged Ball Joints are laboratory tested and feature improved design over the competition for increased longevity and durability, even in the most demanding conditions. Proforged ball joints are available for nearly every year, make and model vehicle found on the road today.

Features

  • 1,000,000 MILE WARRANTY. You can install our ball joints with confidence knowing that every part we sell is backed by our industry-leading 1,000,000 mile limited warranty. We can offer this because our parts are engineered, tested, re-tested, and subject to strict quality control procedures - our quality is second to none.
  • CRAZY STRONG BALL JOINTS. Proforged ball joints are built using some of the toughest steel on the planet. Forged SAE4140 chromoly steel studs are enclosed in forged SAE1045 housings, heat treated for strength and durability, and every fit surface is CNC machined for precision fit and finish. Each unit is sealed with specially-designed CR-rubber boots for ultimate durability.
  • BUILT FOR PROFESSIONALS. There's a reason why the most well-respected performance suspension brands use Proforged ball joints - we're fanatical about quality, performance, and durability. Professionals save time and money with our competitively-priced products that outlast inferior brands. Do the job with confidence - replace your worn components with the leader in performance ball joints: Proforged.
  • WHAT IS A BALL JOINT? A ball joint is an enclosed spherical bearing that connects the control arm to the steering knuckle or spindle - it is a ball-and-socket design, just like your hip, and it needs to be replaced as it wears out. A worn ball joint causes poor handling and makes it difficult or impossible to achieve an alignment, which leads to rapid tire wear. Replacing your worn ball joints gives a noticeable improvement in steering feel, handling, and safety.
  • BUY WITH CONFIDENCE. There's a reason that the most well-respected performance suspension manufacturers buy from Proforged: we're the only brand of chassis parts that offers race-day performance at a price within your budget - and backs it up with a 1,000,000 mile limited warranty. Buy today and get your car, truck, or racecar back on the road and stronger than ever.
  • See more on Amazon...

Brand: Proforged   |   Manufacturer: Proforged

Package Dimensions: 1.8 x 2.9 x 4.3 inches (4.6 x 7.4 x 10.9 cm)

First Available: 2012-11-27

Amazon Price: $27.56 | as of 01/20/2019(11:15pm pst)
Availibility: Usually ships in 24 hours
List Price: $27.39

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

Specialty Products Company 23410 Adjustable Ball Joint for Jeep

Model: 23410   |    Mpn: 23410   |    Ean: 0082642234104   |    PartNumber: 23410   |   Asin: B000SHYXTO

Specialty Products Company (SPC) 23410 Jeep Adjustable Ball Joint is designed specifically for Jeep Grand Cherokees and Commanders to provide camber changes for alignment and drivability issues. It is for the life of the vehicle. Installation time:6 hours per side. Required: 1 per wheel. Its applications are: Jeep: 2006 and Up Commander, 2005 and Up Grand Cherokee.

Features

  • Adjustable ball joint
  • Designed specifically for Jeep Grand Cherokees and Commanders
  • Provides camber changes for alignment and drivability issues
  • Heavy duty design ensures adjustability for the life of the vehicle
  • Applications: Jeep: 2006 and Up Commander, 2005 and Up Grand Cherokee
  • See more on Amazon...

Brand: Specialty Products Company   |   Manufacturer: Specialty Products

Package Dimensions: 3.2 x 6.4 x 7.2 inches (8.1 x 16.3 x 18.3 cm)

Warranty: Limited Lifetime

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #20

Skunk2 916-05-5660 Pro Series Ball-Joint for Honda Civic/Acura Integra

Model: 916-05-5660   |    Mpn: 916-05-5660   |    Ean: 0873265003334   |    PartNumber: 916-05-5660   |   Asin: B008L0GA1Y

Pro Series Ball Joints V2.0, which are compatible with Civic, Integra, and TSX Pro Series front camber kits, may look similar to their predecessor on the surface, but they are not.

Features

  • Pro Series Ball Joints are sold individually Compatible with '88-'91 Civic, '90-'93 Integra, and '04-'08 TSX Pro Series and Pro Series Plus Front Camber Kits
  • See more on Amazon...

Brand: Skunk2 Racing   |   Manufacturer: Skunk2

Package Dimensions: 0.2 x 2.5 x 3.5 inches (0.5 x 6.4 x 8.9 cm)

First Available: 2013-03-16

Amazon Price: $42.99 | as of 01/20/2019(11:15pm pst)
Availibility: Usually ships in 2-3 business days
List Price: $42.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #21

Energy Suspension 9.13126G BALLJOINT DUST Boot

Model: 9.13126G   |    Mpn: ENE-9.13126G   |    Ean: 0703639411024   |    PartNumber: ENE-9.13126G   |   Asin: B000CN9BW8

Energy Suspension is the world's leader in developing and manufacturing performance POLYURETHANE automotive suspension bushings. In order to assure perfect fitment, Energy Suspension manufactures their bushings to exact specifications - assuring an exact fitment to your existing suspension components. These bushings are engineered to exact the maximum in handling performance out your vehicle.

Features

Brand: Energy Suspension   |   Manufacturer: Energy Suspension

Item Dimensions: 4 x 3 x 4 inches (10.2 x 7.6 x 10.2 cm)   |   Package Dimensions: 2.7 x 3.3 x 4.2 inches (6.9 x 8.4 x 10.7 cm)

Amazon Price: $7.09 | as of 01/20/2019(11:15pm pst)
Availibility: Usually ships in 24 hours
List Price: $7.09

Warranty: 2 year manufacturer

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #22

Mevotech MS30500 Lower Suspension Ball Joint

Model: MS30500   |    Mpn: MS30500   |    Ean: 0669719355919   |    PartNumber: MS30500   |   Asin: B0031H6YZO

Mevotech Suspension Ball Joint P/N:MS30500

Features

Brand: Mevotech   |   Manufacturer: Mevotech

Item Dimensions: 2.4 x 3.4 x 5.8 inches (6.1 x 8.6 x 14.7 cm)   |   Package Dimensions: 2.5 x 3.4 x 5.8 inches (6.4 x 8.6 x 14.7 cm)

Amazon Price: $28.95 | as of 01/20/2019(11:15pm pst)
Availibility: Usually ships in 24 hours
List Price: $31.78

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #23

Energy Suspension 9.13130R BALLJOINT Boot

Model: 9.13130R   |    Mpn: ENE-9.13130R   |    Ean: 0703639411147   |    PartNumber: ENE-9.13130R   |   Asin: B000CN9BYG

Energy Suspension is the world's leader in developing and manufacturing performance POLYURETHANE automotive suspension bushings. In order to assure perfect fitment, Energy Suspension manufactures their bushings to exact specifications - assuring an exact fitment to your existing suspension components. These bushings are engineered to exact the maximum in handling performance out your vehicle.

Features

Brand: Energy Suspension   |   Manufacturer: Energy Suspension

Package Dimensions: 2.36 x 2.36 x 5.12 inches (6.0 x 6.0 x 13.0 cm)

Amazon Price: $3.82 | as of 01/20/2019(11:15pm pst)
Availibility: Usually ships in 3-4 business days
List Price: $5.95

Warranty: 2 year manufacturer

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #24

Energy Suspension 9.13130G BALLJOINT Boot

Model: 9.13130G   |    Mpn: ENE-9.13130G   |    Ean: 0703639411130   |    PartNumber: ENE-9.13130G   |   Asin: B000CN5F14

Energy Suspension is the world's leader in developing and manufacturing performance POLYURETHANE automotive suspension bushings. In order to assure perfect fitment, Energy Suspension manufactures their bushings to exact specifications - assuring an exact fitment to your existing suspension components. These bushings are engineered to exact the maximum in handling performance out your vehicle.

Features

Brand: Energy Suspension   |   Manufacturer: Energy Suspension

Package Dimensions: 2.2 x 2.3 x 5.2 inches (5.6 x 5.8 x 13.2 cm)

Amazon Price: $3.82 | as of 01/20/2019(11:15pm pst)
Availibility: Usually ships in 24 hours
List Price: $5.95

Warranty: 2 year manufacturer

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #25

Prothane 19-1715-BL Black Ball Joint Boot Kit - Pack of 4

Model: 19-1715-BL   |    Mpn: 191715BL   |    Ean: 0636169018794   |    PartNumber: 191715BL   |   Asin: B000NSJ050

Polyurethane based suspension, driveline and chassis components have been designed as an upgrade to the soft factory rubber components.

Features

  • Precision fabrication assures perfect fit
  • Holds super grease for quiet operation
  • Premium grade polyurethane components
  • Provides necessary rigidity
  • See more on Amazon...

Brand: Prothane   |   Manufacturer: Prothane

Item Dimensions: 2.5 x 3.5 x 3 inches (6.4 x 8.9 x 7.6 cm)   |   Package Dimensions: 1 x 5.7 x 7.8 inches (2.5 x 14.5 x 19.8 cm)

First Available: 2007-02-26

Amazon Price: $7.99 | as of 01/20/2019(11:15pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $11.95

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #26

Energy Suspension 9.13125R Ball Joint Replacement Boot

Model: 9.13125R   |    Mpn: ENE-9.13125R   |    Ean: 0703639410997   |    PartNumber: ENE-9.13125R   |   Asin: B000CN9BVO

The nature of this superior material, Energy Suspension's Hyper-Flex, is the result of twenty plus years of experience working with and formulating polyurethane materials. Careful selection of material firmness or durometer is used for each specific application on the vehicle's suspension and frame. The three most valuable reasons for using Energy Suspension's Hyper-Flex components are performance, durability and appearance. Called "HYPERformance", Energy Suspension's Hyper-Flex is performance polyurethane that delivers an amazing amount of performance to any vehicle that runs with it. Proven on the race track as well as the street, on and off-road, under the most demanding conditions. Over twenty years of positive customer raves have attested to that. Whether domestic or import, front, rear or 4WD, or old or new, all vehicles will achieve that level of performance that has made Energy Suspension the most asked-for name in performance polyurethane suspension components. Durable Hyper-Flex components do not rot or deteriorate from exposure to oils and undercar chemicals or atmospheric conditions like smog and ozone. Unlike O.E.M. rubber, Hyper-Flex components will not break down and deteriorate causing mushy handling and poor steering response. Certainly not what you want on your vehicle. And for improved appearance, Hyper-Flex components are available in red or black, to suit your needs for show or go.

Features

  • Durability is superior for cars, trucks and SUVs; road salt, oil, and a host of other common under car contaminants will eventually destroy the rubber bushings on your vehicles, not to mention the weight and torque forces that typically compress rubber
  • Hyper-Flex replacement polyurethane components stand up well to contaminants that often destroy rubber and have been engineered to give longer-lasting performance and not compress permanently
  • Hyper-Flex is offered in a variety of durometers (firmness or softness), depending on product application; performance tested and race proven; used for all of Energy Suspension products that require a higher level of performance and durability
  • If you are modifying, building a new vehicle for scratch or restoring an old one, Energy Suspension's Hyper-Flex performance polyurethane should be the 'ground zero' focus of your present and next vehicle plans
  • Over two decades of in-house experience in innovating, engineering and formulating wide selection of polyurethane components for many different industries, Energy Suspension has qualified as premier manufacturer of the high quality polyurethane products
  • See more on Amazon...

Brand: Energy Suspension   |   Manufacturer: Energy Suspension

Item Dimensions: 2 x 2.88 x 6.75 inches (5.1 x 7.3 x 17.1 cm)   |   Package Dimensions: 2 x 2.4 x 6.4 inches (5.1 x 6.1 x 16.3 cm)

Amazon Price: $11.46 | as of 01/20/2019(11:15pm pst)
Availibility: Usually ships in 24 hours
List Price: $8.95

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. Specialty Products Company 23410 Adjustable Ball Joint for Jeep
  2. Skunk2 916-05-5660 Pro Series Ball-Joint for Honda Civic/Acura Integra
  3. Energy Suspension 9.13126G BALLJOINT DUST Boot
  4. Mevotech MS30500 Lower Suspension Ball Joint
  5. Energy Suspension 9.13130R BALLJOINT Boot
  6. Energy Suspension 9.13130G BALLJOINT Boot
  7. Skunk2 916-05-5670 Pro Series Ball-Joint for Honda Civic/Acura Integra
  8. Prothane 19-1715-BL Black Ball Joint Boot Kit - Pack of 4
  9. Energy Suspension 9.13125R Ball Joint Replacement Boot
  10. Alloy USA 11801 Upper & Lower Ball Joint Kit - 4 Pieces

Most Wished For

  1. Skunk2 916-05-5670 Pro Series Ball-Joint for Honda Civic/Acura Integra
  2. Buddy Club BC02-BJP1-H002 P1 Racing Extended Ball Joint for Honda Civic 1992-2000 / Acura Integra 19...
  3. Proforged 101-10016 Tall Upper Ball Joint
  4. Proforged 101-10037 Greasable E-Coated Front Upper Ball Joint - RWD
  5. Specialty Products Company 40920 Ball Joint Press Set for Honda
  6. Alloy USA 11801 Upper & Lower Ball Joint Kit - 4 Pieces
  7. Proforged 101-10213 Front Right Lower Ball Joint
  8. Yukon Gear & Axle (YSPBJ-012) Ball Joint Kit for Dana 30 Differential
  9. SPC Performance 25477 Ball Joint Boot Replacement Kit
  10. Proforged 101-10350 Greasable Front Lower Ball Joint

Most Gifted

  1. Specialty Products Company 23410 Adjustable Ball Joint for Jeep
  2. Skunk2 916-05-5660 Pro Series Ball-Joint for Honda Civic/Acura Integra
  3. Energy Suspension 9.13126G BALLJOINT DUST Boot
  4. Mevotech MS30500 Lower Suspension Ball Joint
  5. Energy Suspension 9.13130R BALLJOINT Boot
  6. Energy Suspension 9.13130G BALLJOINT Boot
  7. Skunk2 916-05-5670 Pro Series Ball-Joint for Honda Civic/Acura Integra
  8. Prothane 19-1715-BL Black Ball Joint Boot Kit - Pack of 4
  9. Energy Suspension 9.13125R Ball Joint Replacement Boot
  10. Alloy USA 11801 Upper & Lower Ball Joint Kit - 4 Pieces

Top Selling

  1. Proforged 101-10048 Tall Lower Ball Joint - RWD
  2. Proforged 101-10302 Greasable Front Lower Ball Joint
  3. Steeda 555-8101 X2 Ball Joint
  4. Mevotech MK80630 Upper Suspension Ball Joint
  5. Energy Suspension 9.13125G BALLJOINT Replacement Boots
  6. Proforged 101-10240 Greasable Front Upper Ball Joint - RWD
  7. Energy Suspension 9.13128R BALLJOINT Boots
  8. Skunk2 916-05-5670 Pro Series Ball-Joint for Honda Civic/Acura Integra
  9. Alloy USA 11801 Upper & Lower Ball Joint Kit - 4 Pieces
  10. Specialty Products Company 67125 1.5° Adjustable Ball Joint for Honda/Acura



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Care & Cleaning


Electronics


Exterior Accessories


Interior Accessories


Lights


Oils & Fluids


Tires & Wheels


Tools & Equipment


Performance Parts


Rv Parts


Motorcycle & Powersports


Replacement Parts