Frontpage > Car & Automotive > Performance Parts > Valve Locks

Best Valve Locks - Buying Guide

Last Updated: 11/20/2018

Share on


  #1

Competition Cams 601-16 Street Steel Locks, 7 degree Lock Angle for 11/32" Valve Stem Diameter

Model: 601-16   |    Mpn: 601-16   |    Ean: 0036584150084   |    PartNumber: 601-16   |   Asin: B000CIQA90

These hardened steel, single groove Steel Street Locks with 7 degree lock angle and 11/32 inch valve stem size are perfect replacement locks for stock engine rebuilds. They are recommended only for street applications with lighter valve spring loads. It is critically important to make sure valve locks match the valve size. There should always be a small gap between the two halves of the lock when they are properly positioned on the valve stem. If the two halves fit together without a gap, they are too large. If the locks fit tight to the stem and leave a gap between the middle of the lock and the O.D. of the stem, the locks are too small. Most people believe that the tang inside a valve lock holds the retainer and valve spring in place while the engine is running. This is not the case. The cross-section of material in the tang is not strong enough to withstand open spring loads of 1000 pounds. or more. The sole purpose of the tang is to temporarily locate the lock, retainer and spring relative to the valve until the taper of the retainer can nest around the outside surface of the lock. This creates a collet effect that binds the two together. The more spring force exerted on the retainer (as the valve opens), the more force applied by the collet effect to keep the retainer and lock in place.

Features

  • Recommended for street applications with lighter spring pressures
  • Stamped and hardened for superior wear resistance
  • See more on Amazon...

Brand: Comp Cams   |   Manufacturer: COMP Cams

Package Dimensions: 0.2 x 3.8 x 6 inches (0.5 x 9.7 x 15.2 cm)

Amazon Price: $6.88 | as of 11/20/2018(2:10am pst)
Availibility: Usually ships in 24 hours
List Price: $17.54

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

Competition Cams 648-16 Machined Steel Race Locks, 7 degree Lock Angle for 11/32" Valve Stem Diameter

Model: 648-16   |    Mpn: 64816   |    Ean: 0036584069737   |    PartNumber: 64816   |   Asin: B0014EXJXG

These single groove Machined Steel Street Locks with 7 degree lock angle and 11/32 inch valve stem size are perfect replacement locks for street applications. It is critically important to make sure valve locks match the valve size. There should always be a small gap between the two halves of the lock when they are properly positioned on the valve stem. If the two halves fit together without a gap, they are too large. If the locks fit tight to the stem and leave a gap between the middle of the lock and the O.D. of the stem, the locks are too small. Most people believe that the tang inside a valve lock holds the retainer and valve spring in place while the engine is running. This is not the case. The cross-section of material in the tang is not strong enough to withstand open spring loads of 1000 pounds. or more. The sole purpose of the tang is to temporarily locate the lock, retainer and spring relative to the valve until the taper of the retainer can nest around the outside surface of the lock. This creates a collet effect that binds the two together. The more spring force exerted on the retainer (as the valve opens), the more force applied by the collet effect to keep the retainer and lock in place.

Features

  • Machined steel single groove
  • 7 degree lock angle, 11/32 inch valve stem diameter
  • Features a single groove
  • 7 degree lock angle
  • Easy installation
  • See more on Amazon...

Brand: Comp Cams   |   Manufacturer: COMP Cams

Package Dimensions: 0.3 x 4.4 x 6.4 inches (0.8 x 11.2 x 16.3 cm)

Amazon Price: $19.88 | as of 11/20/2018(2:10am pst)
Availibility: Usually ships in 24 hours
List Price: $28.44

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

Competition Cams 623-16 Machined Steel Race Locks, 7 degree Lock Angle for 8mm Valve Stem Diameter

Model: 623-16   |    Mpn: 62316   |    Ean: 0036584094210   |    PartNumber: 62316   |   Asin: B000V9HYHM

These single groove Machined Steel Street Locks with 7 degree lock angle and 8mm valve stem size are perfect locks for GM Gen III/LS1/LS2/LS6 applications. It is critically important to make sure valve locks match the valve size. There should always be a small gap between the two halves of the lock when they are properly positioned on the valve stem. If the two halves fit together without a gap, they are too large. If the locks fit tight to the stem and leave a gap between the middle of the lock and the O.D. of the stem, the locks are too small. Most people believe that the tang inside a valve lock holds the retainer and valve spring in place while the engine is running. This is not the case. The cross-section of material in the tang is not strong enough to withstand open spring loads of 1000 pounds. or more. The sole purpose of the tang is to temporarily locate the lock, retainer and spring relative to the valve until the taper of the retainer can nest around the outside surface of the lock. This creates a collet effect that binds the two together. The more spring force exerted on the retainer (as the valve opens), the more force applied by the collet effect to keep the retainer and lock in place.

Features

  • Machined steel single groove for GM Gen III/IV applications
  • 7 degree lock angle, 8 mm valve stem diameter
  • See more on Amazon...

Brand: Comp Cams   |   Manufacturer: COMP Cams

Package Dimensions: 0.3 x 3 x 5 inches (0.8 x 7.6 x 12.7 cm)

Amazon Price: $32.99 | as of 11/20/2018(2:10am pst)
Availibility: Usually ships in 24 hours
List Price: $36.49

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

Crane Cams 99096-1 11/32" + -0.050" Machined Steel Valve Lock, (Set of 32)

Model: 99096-1   |    Mpn: 99096-1   |    Ean: 0021174028164   |    PartNumber: 99096-1   |   Asin: B000CIS0HU

Crane Cams 11/32 inch + -0.050 inch Machined Steel Valve Lock, (Set of 32) features rugged steel valve spring retainers. They are made from high-quality steel bar stock. They are heat-treated for maximum strength and durability, and black oxide coated for corrosion resistance. The titanium retainers are also offered, precision machined from certified grade bar stock. They feature either a 7 degree or 10 degree taper, and they are compatible with either Crane's stamped valve stem locks or their machined steel locks.

Features

  • Machined from high quality alloy steel billet material using the finest Swiss-built, automatic screw machines
  • Engineered specifically for today's high engine speeds and high tension valve springs
  • Used with Posi Lock valve spring retainers
  • Protected from corrosion by oxide finish
  • Single grove design with -0.050 installed hegiht
  • See more on Amazon...

Brand: Crane Cams   |   Manufacturer: Crane Cams

Item Dimensions: 1.3 x 4.6 x 5.3 inches (3.3 x 11.7 x 13.5 cm)   |   Package Dimensions: 1.1 x 3.8 x 6.4 inches (2.8 x 9.7 x 16.3 cm)

First Available: 2011-11-04

Amazon Price: $30.05 | as of 11/20/2018(2:10am pst)
Availibility: Usually ships in 24 hours
List Price: $30.05

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

Competition Cams 603-16 Street Steel Locks, 7 degree Lock Angle for 3/8" Valve Stem Diameter

Model: 603-16   |    Mpn: 60316   |    Ean: 0036584150176   |    PartNumber: 60316   |   Asin: B000CIQA9U

These hardened steel, single groove Steel Street Locks with 7 degree lock angle and 3/8 inch valve stem size are perfect replacement locks for stock engine rebuilds. They are recommended only for street applications with lighter valve spring loads. It is critically important to make sure valve locks match the valve size. There should always be a small gap between the two halves of the lock when they are properly positioned on the valve stem. If the two halves fit together without a gap, they are too large. If the locks fit tight to the stem and leave a gap between the middle of the lock and the O.D. of the stem, the locks are too small. Most people believe that the tang inside a valve lock holds the retainer and valve spring in place while the engine is running. This is not the case. The cross-section of material in the tang is not strong enough to withstand open spring loads of 1000 pounds. or more. The sole purpose of the tang is to temporarily locate the lock, retainer and spring relative to the valve until the taper of the retainer can nest around the outside surface of the lock. This creates a collet effect that binds the two together. The more spring force exerted on the retainer (as the valve opens), the more force applied by the collet effect to keep the retainer and lock in place.

Features

  • Recommended for street applications with lighter spring pressures
  • Stamped and hardened for superior wear resistance
  • See more on Amazon...

Brand: Comp Cams   |   Manufacturer: COMP Cams

Package Dimensions: 0.2 x 4 x 5.3 inches (0.5 x 10.2 x 13.5 cm)

Amazon Price: $6.88 | as of 11/20/2018(2:10am pst)
Availibility: Usually ships in 24 hours
List Price: $17.54 | Used Price: $13.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

Manley 13162-8 Valve Spring Lock

Model: 13162-8   |    Mpn: 13162-8   |    Ean: 0807298064987   |    PartNumber: 13162-8   |   Asin: B003TQ7M1W

Manley 13162-8 Valve Spring Lock

Features

Brand: Manley   |   Manufacturer: Manley

Item Dimensions: 6 x 57 x 96 inches (15.2 x 144.8 x 243.8 cm)   |   Package Dimensions: 0.5 x 4.75 x 8 inches (1.3 x 12.1 x 20.3 cm)

Amazon Price: $30.99 | as of 11/20/2018(2:10am pst)
Availibility: Usually ships in 24 hours
List Price: $36.49

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

Ferrea Racing Components K10033 11/32" Radial Valve Lock

Model: K10033   |    Mpn: K10033   |    PartNumber: K10033   |   Asin: B003L6D0UC

For Over 48 Years Ferrea has been manufacturing hardcore racing engine valves and components for various types of engines in a wide range of categories worldwide. Our company uses the latest technological advances gained through the development of engine valve programs for Formula 1, Indy Car, NASCAR, Sprint Car, Drag and Road racing teams. This technology allows us to provide the highest level of performance and reliability for our customers. Our association with many of the industry s leading head manufactures has given us the opportunity to implement these race proven high quality designs for all categories of racing.

Features

  • Valve Lock - 10 Degree - 11/32 in Valve Stem - Standard Height - Chromoly - Natural - Universal - Pair Notes: 1 PR. (1-VALVE)
  • See more on Amazon...

Brand: Ferrea Racing Components   |   Manufacturer: Ferrea Racing Components

Package Dimensions: 1.2 x 3.94 x 5.95 inches (3.0 x 10.0 x 15.1 cm)

Amazon Price: $10.77 | as of 11/20/2018(2:10am pst)
Availibility: Usually ships in 24 hours
List Price: $8.97

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

Comp Cams 6111 11/32" Valve Stem Lock

Model: 611-1   |    Mpn: 6111   |    Ean: 0036584160069   |    PartNumber: 6111   |   Asin: B000V9AY6U

Wider Angle. Precision Machined. Super Tough. Inside Tang. 1 Year Limited Warranty.

Features

Brand: Comp Cams   |   Manufacturer: COMP Cams

Package Dimensions: 0.2 x 1.26 x 3.58 inches (0.5 x 3.2 x 9.1 cm)

Amazon Price: $1.99 | as of 11/20/2018(2:10am pst)
Availibility: Usually ships in 24 hours
List Price: $1.70

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

Crane Cams 99051-1 0.030" x 1.480" x 0.703" Valve Spring Shim, (Set of 16)

Model: 99051-1   |    Mpn: 99051-1   |    Ean: 0021174005868   |    PartNumber: 99051-1   |   Asin: B000CCFYJ8

Crane Cams 0.030 inch x 1.480 inch x 0.703 inch Valve Spring Shim, (Set of 16) features hardened valve spring shims in .015 inch, .030 inch, and .060 inch thicknesses.

Features

Brand: Crane Cams   |   Manufacturer: Crane Cams

Item Dimensions: 2 x 5 x 7 inches (5.1 x 12.7 x 17.8 cm)   |   Package Dimensions: 0.9 x 4.6 x 6.1 inches (2.3 x 11.7 x 15.5 cm)

First Available: 2011-11-04

Amazon Price: $16.00 | as of 11/20/2018(2:10am pst)
Availibility: Usually ships in 24 hours
List Price: $18.80

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

Skunk2 312-05-0150 Black Valve Keeper/Lock for Honda

Model: 312-05-0150   |    Mpn: 312-05-0150   |    Ean: 0873265008223   |    PartNumber: 312-05-0150   |   Asin: B00KIOQ656

Skunk2 Valve Keepers/Locks for Honda/Acura B/D/F/H VTEC and K Series VTEC Engines. Manufactured from bar stock and CNC machined for precision fit and finish. The Skunk2 Keeper/Locks are then heat-treated for ultimate strength and completed with Black Oxide for corrosive resistance and a great appearance. One set includes 32 pieces (enough for 16 valves) that fit factory and aftermarket 5.5mm valves. These keepers are 7 degree and work with most all retainers both OEM and aftermarket.

Features

Brand: Skunk2 Racing   |   Manufacturer: Skunk2

Package Dimensions: 0.3 x 4.7 x 5.1 inches (0.8 x 11.9 x 13.0 cm)

First Available: 2014-05-23

Amazon Price: $52.49 | as of 11/20/2018(2:10am pst)
Availibility: Usually ships in 24 hours
List Price: $52.49

Warranty: Skunk2 Racing warrants all products to be free from defects in materials and workmanship for normal use and service, regardless of mileage, for a period of time not to exceed 12 months from the original date of retail purchase. Parts returned must be determined by Skunk2 Racing to be defective prior to any warranty credit or replacement is issued. Skunk2 Racing's obligation under warranty shall be limited to repairing or replacing, at its discretion, any part proven defective. The customer must prepay transportation charges. Final determination of the suitability of the products for the use contemplated by the buyer is the sole responsibility of the buyer.

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

COMP Cams 5308 Pro Valve Lock Removal and Installation Tool for 7mm, 8mm and 5/16" Lock

Model: 5308   |    Mpn: 5308   |    Ean: 0036584010807   |    PartNumber: 5308   |   Asin: B00062Z8KY

Don't risk your fingers when removing or installing valve locks anymore. COMP Cams Pro Valve Lock Removal and Installation Tool is definitely the best way to perform this delicate task. To install locks compress the valve spring, place locks on magnetic stem, push the body of the tool over the locks and position them on the valve stem. Then release the valve spring. To remove locks use the magnetic stem to pluck off the valve locks once the spring has been compressed.

Features

  • For 7 millimeter, 8 millimeter and 5/16 inches locks
  • To install locks compress valve spring, place locks on magnetic stem, push body of the tool over the locks, position them on the valve stem and then release
  • To remove locks use the magnetic stem to pluck off the valve locks once the spring has been compressed
  • See more on Amazon...

Brand: Comp Cams   |   Manufacturer: COMP Cams

Item Dimensions: 1.5 x 5.75 x 9.5 inches (3.8 x 14.6 x 24.1 cm)   |   Package Dimensions: 1.5 x 5.9 x 9.3 inches (3.8 x 15.0 x 23.6 cm)

First Available: 2012-06-05

Amazon Price: $28.70 | as of 11/20/2018(2:10am pst)
Availibility: Usually ships in 24 hours
List Price: $42.64

Warranty: 1 Year Limited

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

COMP Cams 604-16 Valve Lock (3/8" Four Groove)

Model: 604-16   |    Mpn: 604-16   |    Ean: 0036584150213   |    PartNumber: 604-16   |   Asin: B000N5OLIE

These hardened steel, single groove Steel Street Locks with 7 Degree lock angle and 11/32" valve stem size are perfect replacement locks for stock engine rebuilds. They are recommended only for street applications with lighter valve spring loads. It is critically important to make sure valve locks match the valve size. There should always be a small gap between the two halves of the lock when they are properly positioned on the valve stem. If the two halves fit together without a gap, they are too large. If the locks fit tight to the stem and leave a gap between the middle of the lock and the O.D. of the stem, the locks are too small. Most people believe that the tang inside a valve lock holds the retainer and valve spring in place while the engine is running. This is not the case. The cross-section of material in the tang is not strong enough to withstand open spring loads of 1000 lbs. or more. The sole purpose of the tang is to temporarily locate the lock, retainer and spring relative to the valve until the taper of the retainer can nest around the outside surface of the lock. This creates a "collet" effect that binds the two together. The more spring force exerted on the retainer (as the valve opens), the more force applied by the "collet" effect to keep the retainer and lock in place.

Features

  • Recommended for street applications with lighter spring pressures
  • Stamped and hardened for superior wear resistance
  • Designed for good performance
  • See more on Amazon...

Brand: Comp Cams   |   Manufacturer: COMP Cams

Package Dimensions: 0.63 x 3.82 x 7.13 inches (1.6 x 9.7 x 18.1 cm)

First Available: 2016-12-07

Amazon Price: $14.35 | as of 11/20/2018(2:10am pst)
Availibility: Usually ships in 24 hours
List Price: $15.11

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

Crane 99052-1 Valve Spring Shims - Set of 32

Model: 99052-1   |    Mpn: 990521   |    Ean: 0021174005875   |    PartNumber: 990521   |   Asin: B000CCFHCM

The Crane Valve Spring Shims are precision stamped from durable steel shim stock. These valve spring shims are zinc plated for wear resistance. This set of shims makes it easy to get precise and equal pressure on all valves.

Features

  • Hardened durable steel shim stock
  • Zinc plated for wear resistance
  • 0.060 X 1.480 X 0.703
  • Set of 32
  • See more on Amazon...

Brand: Crane Cams   |   Manufacturer: Crane Cams

Item Dimensions: 1.3 x 4.65 x 5.4 inches (3.3 x 11.8 x 13.7 cm)   |   Package Dimensions: 1.2 x 3.94 x 5.95 inches (3.0 x 10.0 x 15.1 cm)

First Available: 2005-11-15

Amazon Price: $20.24 | as of 11/20/2018(2:10am pst)
Availibility: Usually ships in 24 hours
List Price: $20.92

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

Edelbrock 9611 Valve Stem Lock - Set of 32

Model: 9611   |    Mpn: 9611   |    Ean: 0085347096114   |    PartNumber: 9611   |   Asin: B000CN727O

The Edelbrock Valve Stem Lock is made from top-quality steel which is Heat-Treated Machined (HTM) for maximum strength. The valve stem lock has a 7 degree style with a single groove. It is designed to be used with Edelbrock retainers.

Features

  • Black oxide finish and stamped steel give high strength
  • Valve stem diameter measures 11/32
  • 7 degree lock style with a single groove
  • Not recessed for lash cap
  • Meant to be used with the Edelbrock retainers
  • See more on Amazon...

Brand: Edelbrock   |   Manufacturer: Edelbrock

Package Dimensions: 1.1 x 1.6 x 5.5 inches (2.8 x 4.1 x 14.0 cm)

First Available: 2012-06-05

Amazon Price: $40.55 | as of 11/20/2018(2:10am pst)
Availibility: Usually ships in 24 hours
List Price: $40.55

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

Manley 13198-16 Valve Spring Lock

Model: 13198-16   |    Mpn: 13198-16   |    Ean: 0807298064543   |    PartNumber: 13198-16   |   Asin: B003TPUMTW

Manley 10 Degree +0.50 Inch Conventional Groove Type Machined Valve Locks (16 pc)

Features

Brand: Manley   |   Manufacturer: Manley

Item Dimensions: 1.7 x 2.7 x 3.2 inches (4.3 x 6.9 x 8.1 cm)   |   Package Dimensions: 2.8 x 3.27 x 8.54 inches (7.1 x 8.3 x 21.7 cm)

Amazon Price: $60.99 | as of 11/20/2018(2:10am pst)
Availibility: Usually ships in 24 hours
List Price: $68.77

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

COMP Cams 605-16 Valve Lock (11/32" Four Groove)

Model: 605-16   |    Mpn: 605-16   |    Ean: 0036584150251   |    PartNumber: 605-16   |   Asin: B000CEO7JE

Valve Locks, 11/32" Four Groove. Rotating design for installation in confined spaces and a compact storage footprint . Nesting halves combines with a padlock to help protect against accidental valve opening during maintenance or repair . This product is manufactured in United States.

Features

  • Rotating design for installation in confined spaces and a compact storage footprint
  • Nesting halves combines with a padlock to help protect against accidental valve opening during maintenance or repair
  • This product is manufactured in United States
  • See more on Amazon...

Brand: Comp Cams   |   Manufacturer: COMP Cams

Package Dimensions: 0.3 x 2.4 x 4.2 inches (0.8 x 6.1 x 10.7 cm)

First Available: 2016-12-07

Amazon Price: $13.62 | as of 11/20/2018(2:10am pst)
Availibility: Usually ships in 24 hours
List Price: $17.54

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

Ferrea Racing Components K10067 11/32" Radial Valve Lock

Model: K10067   |    Mpn: K10067   |    PartNumber: K10067   |   Asin: B003L6B2AC

For Over 48 Years Ferrea has been manufacturing hardcore racing engine valves and components for various types of engines in a wide range of categories worldwide. Our company uses the latest technological advances gained through the development of engine valve programs for Formula 1, Indy Car, NASCAR, Sprint Car, Drag and Road racing teams. This technology allows us to provide the highest level of performance and reliability for our customers. Our association with many of the industry s leading head manufactures has given us the opportunity to implement these race proven high quality designs for all categories of racing.

Features

  • Valve Lock - 7 Degree - 11/32 in Valve Stem - Standard Height - Chromoly - Natural - Universal - Pair
  • See more on Amazon...

Brand: Ferrea Racing Components   |   Manufacturer: Ferrea Racing Components

Package Dimensions: 1.2 x 3.94 x 5.95 inches (3.0 x 10.0 x 15.1 cm)

Amazon Price: $8.29 | as of 11/20/2018(2:10am pst)
Availibility: Usually ships in 24 hours
List Price: $13.13

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

COMP Cams 5310 Pro Valve Lock Removal and Installation Tool for 3/8" Lock

Model: 5310   |    Mpn: 5310   |    Ean: 0036584010821   |    PartNumber: 5310   |   Asin: B00062Z8A4

Don't risk your fingers when removing or installing valve locks anymore. COMP Cams Pro Valve Lock Removal and Installation Tool is definitely the best way to perform this delicate task. To install locks compress the valve spring, place locks on magnetic stem, push the body of the tool over the locks and position them on the valve stem. Then release the valve spring. To remove locks use the magnetic stem to pluck off the valve locks once the spring has been compressed.

Features

  • For 3/8 inch locks
  • To install locks compress valve spring, place locks on magnetic stem, push body of the tool over the locks, position them on the valve stem and then release
  • To remove locks use the magnetic stem to pluck off the valve locks once the spring has been compressed
  • See more on Amazon...

Brand: Comp Cams   |   Manufacturer: COMP Cams

Item Dimensions: 2 x 6 x 9 inches (5.1 x 15.2 x 22.9 cm)   |   Package Dimensions: 1.3 x 5.6 x 8.9 inches (3.3 x 14.2 x 22.6 cm)

First Available: 2012-06-05

Amazon Price: $63.31 | as of 11/20/2018(2:10am pst)
Availibility: Temporarily out of stock. Order now and we'll deliver when available. We'll e-mail you with an estimated delivery date as soon as we have more information. Your credit card will not be charged until we ship the item.
List Price: $48.83

Warranty: 1 Year Limited

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

Crower 86110X2-16 Valve Lock Set for 10 Degree -.050" Retainers - Set of 16

Model: 86110X2-16   |    Mpn: 86110X216   |    PartNumber: 86110X216   |   Asin: B003NVG322

STRIPHTML($ITEMDESCRIPTION)

Features

Brand: Crower Cams   |   Manufacturer: Crower Cams

Package Dimensions: 1.2 x 3.94 x 5.95 inches (3.0 x 10.0 x 15.1 cm)

Amazon Price: $46.99 | as of 11/20/2018(2:10am pst)
Availibility: Usually ships in 24 hours
List Price: $46.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #20

COMP Cams 5309 Pro Valve Lock Removal and Installation Tool for 11/32" Locks

Model: 5309   |    Mpn: 5309   |    Ean: 0036584010814   |    PartNumber: 5309   |   Asin: B00062Z8LI

Don't risk your fingers when removing or installing valve locks anymore. COMP Cams Pro Valve Lock Removal and Installation Tool is definitely the best way to perform this delicate task. To install locks compress the valve spring, place locks on magnetic stem, push the body of the tool over the locks and position them on the valve stem; then release the valve spring. To remove locks use the magnetic stem to pluck off the valve locks once the spring has been compressed.

Features

  • For 11/32 inches locks
  • To install locks compress valve spring, place locks on magnetic stem, push body of the tool over the locks, position them on the valve stem and then release
  • To remove locks use the magnetic stem to pluck off the valve locks once the spring has been compressed
  • See more on Amazon...

Brand: Comp Cams   |   Manufacturer: COMP Cams

Item Dimensions: 2 x 6 x 9 inches (5.1 x 15.2 x 22.9 cm)   |   Package Dimensions: 1.3 x 6 x 9.6 inches (3.3 x 15.2 x 24.4 cm)

First Available: 2012-06-21

Amazon Price: $51.94 | as of 11/20/2018(2:10am pst)
Availibility: Usually ships in 1 to 3 months
List Price: $49.18

Warranty: 1 Year Limited

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. Competition Cams 648-16 Machined Steel Race Locks, 7 degree Lock Angle for 11/32" Valve Stem Diamete...
  2. Crane Cams 99051-1 0.030" x 1.480" x 0.703" Valve Spring Shim, (Set of 16)
  3. Crane 99052-1 Valve Spring Shims - Set of 32
  4. Manley 13198-16 Valve Spring Lock
  5. COMP Cams 605-16 Valve Lock (11/32" Four Groove)
  6. Competition Cams 603-16 Street Steel Locks, 7 degree Lock Angle for 3/8" Valve Stem Diameter
  7. Ferrea Racing Components K10067 11/32" Radial Valve Lock
  8. COMP Cams 5310 Pro Valve Lock Removal and Installation Tool for 3/8" Lock
  9. Skunk2 312-05-0150 Black Valve Keeper/Lock for Honda
  10. Comp Cams 6111 11/32" Valve Stem Lock

Most Wished For

  1. Competition Cams 648-16 Machined Steel Race Locks, 7 degree Lock Angle for 11/32" Valve Stem Diamete...
  2. COMP Cams 5308 Pro Valve Lock Removal and Installation Tool for 7mm, 8mm and 5/16" Lock
  3. Skunk2 312-05-0150 Black Valve Keeper/Lock for Honda
  4. Comp Cams 6111 11/32" Valve Stem Lock
  5. Competition Cams 601-16 Street Steel Locks, 7 degree Lock Angle for 11/32" Valve Stem Diameter
  6. Competition Cams 623-16 Machined Steel Race Locks, 7 degree Lock Angle for 8mm Valve Stem Diameter
  7. Competition Cams 603-16 Street Steel Locks, 7 degree Lock Angle for 3/8" Valve Stem Diameter
  8. COMP Cams 604-16 Valve Lock (3/8" Four Groove)
  9. Crane 99052-1 Valve Spring Shims - Set of 32
  10. Edelbrock 9611 Valve Stem Lock - Set of 32

Most Gifted

  1. Competition Cams 648-16 Machined Steel Race Locks, 7 degree Lock Angle for 11/32" Valve Stem Diamete...
  2. Crane Cams 99051-1 0.030" x 1.480" x 0.703" Valve Spring Shim, (Set of 16)
  3. Crane 99052-1 Valve Spring Shims - Set of 32
  4. Manley 13198-16 Valve Spring Lock
  5. COMP Cams 605-16 Valve Lock (11/32" Four Groove)
  6. Competition Cams 603-16 Street Steel Locks, 7 degree Lock Angle for 3/8" Valve Stem Diameter
  7. Ferrea Racing Components K10067 11/32" Radial Valve Lock
  8. COMP Cams 5310 Pro Valve Lock Removal and Installation Tool for 3/8" Lock
  9. Skunk2 312-05-0150 Black Valve Keeper/Lock for Honda
  10. Comp Cams 6111 11/32" Valve Stem Lock

Top Selling

  1. Competition Cams 601-16 Street Steel Locks, 7 degree Lock Angle for 11/32" Valve Stem Diameter
  2. Competition Cams 648-16 Machined Steel Race Locks, 7 degree Lock Angle for 11/32" Valve Stem Diamete...
  3. Competition Cams 623-16 Machined Steel Race Locks, 7 degree Lock Angle for 8mm Valve Stem Diameter
  4. Crane Cams 99096-1 11/32" + -0.050" Machined Steel Valve Lock, (Set of 32)
  5. Competition Cams 603-16 Street Steel Locks, 7 degree Lock Angle for 3/8" Valve Stem Diameter
  6. Manley 13162-8 Valve Spring Lock
  7. Ferrea Racing Components K10033 11/32" Radial Valve Lock
  8. Comp Cams 6111 11/32" Valve Stem Lock
  9. Crane Cams 99051-1 0.030" x 1.480" x 0.703" Valve Spring Shim, (Set of 16)
  10. Skunk2 312-05-0150 Black Valve Keeper/Lock for Honda



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Care & Cleaning


Electronics


Exterior Accessories


Interior Accessories


Lights


Oils & Fluids


Tires & Wheels


Tools & Equipment


Performance Parts


Rv Parts


Motorcycle & Powersports


Replacement Parts



We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.